sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
27,613 Commits 1 Branch 0 Tags 291 MiB
cae56b825b
Commit Graph

27613 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
cae56b825b Merged in david_s5/nuttx/upstream_to_greg_SDIO_fix (pull request #177) 
Allow a config to override the SDIO clock edge setting
 2016-12-07 12:48:11 +00:00
David Sidrane
cbf863b1ca STM32F7: Allow the config to override the clock edge setting 2016-12-06 13:43:57 -10:00
Gregory Nutt
9df1b28e6c SAMV71-XULT: Use syslog(LOG_ERR, ..) not the supposedly hidden _err() macro. 2016-12-06 17:40:52 -06:00
David Sidrane
7cc0a06f44 STM32: Allow the config to override the clock edge setting 2016-12-06 13:30:07 -10:00
Gregory Nutt
b1a5364dd6 Eliminate a warning by adding missing include. 2016-12-06 13:17:20 -06:00
Gregory Nutt
e190e1ee5b stm32fxxxxx_otgfs.h edited online with Bitbucket 2016-12-06 15:58:05 +00:00
Gregory Nutt
8e447453e1 Add a missing bit field definitions that was lost when stm32_otgfs.h was deleted. 2016-12-06 09:22:03 -06:00
Gregory Nutt
d6437407b1 Fix broken build. Previous commit removed a file that was being used. 2016-12-06 09:03:00 -06:00
Gregory Nutt
a441601281 Eliminate a warning 2016-12-06 08:41:30 -06:00
Gregory Nutt
0430185785 Remove BOARDIOC_CAN_INITIALIZE. CAN initializaiton is now performed in board bring-up logic just like every other device driver. 2016-12-06 08:53:05 -06:00
Gregory Nutt
35dfe25430 Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver. 2016-12-06 08:51:37 -06:00
Gregory Nutt
b6a21edb42 Merged in david_s5/nuttx/upstream_to_greg (pull request #176) 
Upstream to greg
 2016-12-06 12:22:42 +00:00
David Sidrane
885b718552 Expanded otgfs support to stm32F469 and stm32f446 
Added missing bits definitions
   Used stm32F469 and stm32f446 bit definitions
   Removed unsed header file
 2016-12-05 18:07:57 -10:00
David Sidrane
50f36f8967 Added support for stmf469 SAI and I2S PLL configuration and STM446 fixes 2016-12-05 14:21:46 -10:00
David Sidrane
8b31eda4d8 Added Timers 2-5 and control of SAI and I2S PLLs 2016-12-05 14:19:56 -10:00
Gregory Nutt
8558bf6bd5 Eliminate some warnings 2016-12-05 18:07:15 -06:00
Gregory Nutt
e5e5467097 In last commit, ENODEV is a better error to report than ENOSYS. 2016-12-05 17:37:19 -06:00
Gregory Nutt
d829c03656 Corrects some warnings and link problems introduced in the last big commits. 2016-12-05 17:24:25 -06:00
Gregory Nutt
ee2852f5ff Remove all references to board_adc_setup() 2016-12-05 17:06:08 -06:00
Gregory Nutt
55dd1c87b3 Remove all references to BOARDIOC_ADCSETUP 2016-12-05 15:31:40 -06:00
Gregory Nutt
4b216ff8dd Finish removing traces of BOARDIOC_PWMSETUP 2016-12-05 14:56:21 -06:00
Gregory Nutt
b999e63c82 Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more. 2016-12-05 13:54:12 -06:00
Gregory Nutt
da69f6df55 SAM4CMP-DB: Add hooks to auto-mount the procfs file system on startup in board bring-up logic. 2016-12-05 11:58:58 -06:00
Gregory Nutt
9ed0387379 Olimex-LPC1766-STK: Enable procfs in NSH configuration. Automount /proc on startup. 2016-12-05 08:52:40 -06:00
Gregory Nutt
6cff0a7012 SAMA5 PWM: Minor improvement to a loop 2016-12-04 15:48:13 -06:00
Gregory Nutt
39c4ecbcd0 SAMA5 PWM: Costmetic 2016-12-04 15:39:53 -06:00
Gregory Nutt
ff76ebfd31 SAMA5 does not build when executing from SDRAM before board frequencies are not constant. Rather, the bootloader configures the clocking and we must derive the clocking from the MCK left by the bootloader. This means lots more computations. This is untested on initial commit because I don't have a good PWM test setup right now. 2016-12-04 15:25:43 -06:00
Gong Darcy
44b7975a5e SSD1306: Fix errors in SPI mode configuration 2016-12-04 10:07:46 -06:00
Gregory Nutt
7c4e3e21b8 Allow option to enable IP address conversions even when the IP address family is not supported. 2016-12-04 09:06:08 -06:00
Masayuki Ishikawa
d92a7886a4 SAM3/4: Add SMP support for the dual-core SAM4CM 2016-12-04 07:23:31 -06:00
Gregory Nutt
9f323692f4 Update README files 2016-12-04 07:07:39 -06:00
Masayuki Ishikawa
b3d182b5d5 Add support for the SAM5CMP-DB board 2016-12-04 07:06:17 -06:00
Masayuki Ishikawa
13c9031a8d Fix DEBUGASSERT() in group_signal.c 2016-12-04 06:52:08 -06:00
Masayuki Ishikawa
84900298b7 ARMv7-M SMP: Applied the latest changes for ARMv7A-SMP 2016-12-04 06:49:49 -06:00
Gregory Nutt
9c65b0321d Eliminate some warnings 2016-12-04 06:24:24 -06:00
Gregory Nutt
920a9592d1 Fix a naming collision introduced in last big commit 2016-12-03 18:19:08 -06:00
Gregory Nutt
4f1b96b29b More networking configurations taht need the work queue enabled. 2016-12-03 17:52:13 -06:00
Gregory Nutt
62114755c9 Misoc hello configuration needs HP work queue enabled. 2016-12-03 17:37:07 -06:00
Gregory Nutt
f45727dffc Fix some kruft left behind in last big commit. 2016-12-03 16:53:31 -06:00
Gregory Nutt
83477c55f8 STM32 Ethernet configurations must have work queue enabled. 2016-12-03 17:06:14 -06:00
Gregory Nutt
a431fc77cb Add a forward refeence to elininate a warning. 2016-12-03 16:35:37 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
bdb8275824 Update TODO list 2016-12-03 12:21:18 -06:00
Gregory Nutt
ad3897531f C5471 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 12:17:55 -06:00
Gregory Nutt
43459fe75e DM09x0 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 11:42:15 -06:00
Gregory Nutt
41e35c88bf eZ80 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 10:43:35 -06:00
Gregory Nutt
eba1e076ec PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT 2016-12-03 09:50:14 -06:00
Gregory Nutt
bfa1da14e2 LM3S Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 08:32:49 -06:00
Gregory Nutt
1851e9e837 SAMA5D3: Add support for CONFIG_NET_NOINTS to EMACA and GMAC driver. 2016-12-02 16:36:27 -06:00
Gregory Nutt
f7d8bbfa3b Update README. 2016-12-02 13:54:01 -06:00