According to the current design on the armv7-a platform,
only fiq is processed in TEE, while irq and fiq are processed
in REE.
If we enable the irq function in TEE, when we process
some signal-related scenarios in TEE,
such as the ostest sighand testcase, this testcase will
call up_irq_enable() to enable irq interrupt in the
arm_sigdeliver() function. After the signal processing
logic is executed, irq will be disabled again.
During the interval of enabling irq, some external device
irq interrupts will be enabled, but these external device
irqs do not have corresponding handlers registered in TEE,
so an "unexpected irq isr exception" will be triggered.
Therefore, a better implementation is to keep the original
implementation of the up_irq_enable() function, that is,
to enable only fiq in TEE and to enable irq and fiq in REE.
Then for vendor-specific requirements, such as the need to
briefly enable irq during the TEE initialization process
and then disable irq before starting APz in TEE, we directly
provide a separate implementation of enabling irq in the
vendor, without modifying the implementation of the public
up_enable_irq() function.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
CC: unistd/lib_setregid.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 53: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
# if NR_IRQS <= 256
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 82: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
#if NR_IRQS <= 256
CC: mount/fs_umount2.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 72: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
#if NR_IRQS <= 256
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
the greenhills compiler provide its own implementation of va_start,
va_end, va_arg, va_copy. so if we are build vela with greenhills
compiler, we should using the stdarg implementation provided by
greenhills, not our own
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Pass CP15_CACHE_INVALIDATE argument with r1 register to cp15_dcache_op_level.
cache level is 0(L1 D-Cache) with r0 register.
prototype:
void cp15_dcache_op_level(uint32_t level, int op)
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 296: warning #76-D:
argument to macro is empty
SP_DSB();
^
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
according to armv6-m/armv7-m arch reference manual:
the three ISB {<opt>}, DSB {<opt>}, DMB {<opt>} instructions <opt>
field are defined as:
Specifies an optional limitation on the ISB/DSB/DMB operation. Allowered
values are:
Full system ISB/DSB/DMB operation, encoded as option=='1111'. Can be
omitted.
All other encodings of the options are RESERVED.
the "#opt" field of "isb #opt"
So we could remove the options field in Armv7-m platform.
The following are the build error with greenhills compiler:
CC: common/arm_exit.c [asarm] (error #2071) /tmp/gh_001h70j1.si 92: bad parameter
isb 15
------^
[asarm] (error #2071) /tmp/gh_001h70j1.si 112: bad parameter
isb 15
------^
[asarm] (error) errors during processing
According to armv8-m arch reference manual:
the ISB/DMB instruction's "opt" encoding rule is same as
armv6-m/armv7-m, but the "DSB" instruction is different, in armv8-m, the
"DSB {<opt>}" field has two valid encoding options: 0b0000, 0b0100.
and all other encoding options are reserved.
In Armv7-a/Armv8-a, the dsb/dmb option field has 8 valid state value.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
The following are the compile error that reported
by GreenHills compiler:
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 156 (col. 17): error #2036-D:
cannot allocate "reg0" to specified caller-saved register
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 157 (col. 17): error #2036-D:
cannot allocate "reg1" to specified caller-saved register
Then we fix this greenhills compilation error by explicitly specifying
the registers in the clobber list in the inline assembly code.
This fix is successful in compiling on the
nuttx/boards/arm/mps/mps2-an500/configs/nsh platform and passes
the ostest test.
However, if we keep the implementation the same for both the default
and Greenhills compilers, the default compiler will report the
following two issues:
1. the "sys_call6" function will report compile error when
compiling on "./vendor/qemu/boards/smartspeaker/configs/smartspeaker-knsh"
platform, the detailed error info:
CC: proxies/PROXY_mq_getattr.c In file included from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/sys/syscall.h:35,
from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/syscall.h:30,
from proxies/PROXY_mmap.c:5:
In function 'sys_call6',
inlined from 'mmap' at proxies/PROXY_mmap.c:9:22:
/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/syscall.h:297:3: error: 'asm' operand has impossible constraints
297 | __asm__ __volatile__
| ^~~~~~~
2. when running on qemu-armv7-a platform, the modification to
"smh_call()" function will make the system fail to boot up, so
we need to keep the default compiler implementation and greenhills
compiler implementation separate
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
(cherry picked from commit cb48b749b1c9cad8cfb96bff7c5e9b6ebf20fc8a)
This adds the necessary defines to set the USARTs' kernel clock source
selection.
This is required for a configuration where the bootloader (running
before NuttX) changes the USARTs' clock selection, so they need to be
restored on board init.
This is according to the reference manual RM0399 page 448.
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
The following warnings is fixed:
chip/sam_pwm.c:961:12: warning: unused variable 'regval' [-Wunused-variable]
961 | uint32_t regval;
chip/sam_serial.c: In function 'sam_dma_txavailable':
chip/sam_serial.c:2264:7: warning: unused variable 'rv' [-Wunused-variable]
2264 | int rv;
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Larger RX/TX buffers might be required for both FD and FD_BSW modes.
Default bit timing values are also changed since the original ones
did not provide correct results for default SAMv7 board clock selection
(150 MHz clock frequency). The current values provide correct bit timing
with sample point as close to 87.5 %.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This adds field type to canioc_bittiming_s structure that allows
to set/obtain bit timing for both CAN CC and CAN FD.
CANIOC_GET_BITTIMING is now bidirectional: user specifies type field
and gets other fields from the controller.
The commit also updates current CAN FD capable controllers using the
ioctl. The type is not checked for classical CAN only controllers
and nominal bit timing is returned regardless of type value.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Following warnings were caused by incorrect naming of few defines.
chip/sam_mcan.c:415:7: warning: "MCAN1_NTSEG1" is not defined, evaluates to 0 [-Wundef]
415 | # if MCAN1_NTSEG1 > 63
| ^~~~~~~~~~~~
chip/sam_mcan.c:418:7: warning: "MCAN1_NTSEG2" is not defined, evaluates to 0 [-Wundef]
418 | # if MCAN1_NTSEG2 > 15
| ^~~~~~~~~~~~
chip/sam_mcan.c:421:7: warning: "MCAN1_NSJW" is not defined, evaluates to 0 [-Wundef]
421 | # if MCAN1_NSJW > 15
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
During the boot phase, when we transition from tee smp to ap smp, we can use a busy waitflag to wait for the completion of the initialization of ap's core0
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Only in the non-critical region， nuttx can the respond to the irq and not hold the lock
When returning from the irq, there is no need to check whether the lock needs to be restored
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
