| .. |
|
chip
|
SAMA5 CAN: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:00:32 -06:00 |
|
chip.h
|
|
|
|
Kconfig
|
SAMA5 SSC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:58:23 -06:00 |
|
Make.defs
|
Optimized memcpy() functin for the ARMv7-A from David Sidrane
|
2014-05-06 14:58:48 -06:00 |
|
sam_adc.c
|
SAMA5 CAN: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:00:32 -06:00 |
|
sam_adc.h
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
sam_allocateheap.c
|
Add support for .data and .bss in SDRAM
|
2014-01-28 14:35:03 -06:00 |
|
sam_boot.c
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
sam_can.c
|
SAMA5 CAN: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:00:32 -06:00 |
|
sam_can.h
|
SAMA5 CAN: Driver is now code complete but still untested
|
2013-10-22 15:47:52 -06:00 |
|
sam_clockconfig.c
|
Sourceforge patch #40. Fix some conditional logic in clock configuration. From Luciano Neri
|
2014-04-29 11:32:33 -06:00 |
|
sam_clockconfig.h
|
Move the un-definitions of __ramfuncs__ from the sam_clockconfig.c to the common up_internal.h header file so that the attribute will be applied the same to function definitions and prototypes.
|
2014-04-17 08:56:20 -06:00 |
|
sam_dbgu.c
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
sam_dbgu.h
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
sam_dmac.c
|
Minor updates to comments and README files
|
2013-12-07 07:00:48 -06:00 |
|
sam_dmac.h
|
SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers
|
2013-08-09 13:12:16 -06:00 |
|
sam_ehci.c
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_emac.c
|
SAMA5 EMAC: Missing right parens from last change. Noted by Luciano Neri
|
2014-04-17 09:02:55 -06:00 |
|
sam_ethernet.c
|
SAMA5 EMAC: Changes from early debug sessions. Still a way to go
|
2013-09-17 15:52:19 -06:00 |
|
sam_ethernet.h
|
SAMA5 PCK: Add support for programmable clock outputs
|
2013-11-14 11:16:04 -06:00 |
|
sam_gf512.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_gf1024.c
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_gmac.c
|
SAMA5 EMAC/GMAC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:13:08 -06:00 |
|
sam_hsmci_clkdiv.c
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_hsmci.c
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_hsmci.h
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_irq.c
|
SAMA5: Cosmetic updates to comments and README files
|
2014-04-03 15:30:00 -06:00 |
|
sam_irq.h
|
SAMA5 interrupt handling logic
|
2013-07-22 11:54:39 -06:00 |
|
sam_isi.c
|
SAMA5 PCK: Need to configure the programmable clock output pin as well
|
2013-11-14 11:41:59 -06:00 |
|
sam_isi.h
|
SAMA5 ISI: Framework for ISI drivers. Not much there on initial check-in
|
2013-11-14 11:17:00 -06:00 |
|
sam_lcd.c
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_lcd.h
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
sam_lowputc.c
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
sam_lowputc.h
|
SAMA5 interrupt handling logic
|
2013-07-22 11:54:39 -06:00 |
|
sam_memories.c
|
SAMA5 NAND: Fix some DMA related issues
|
2013-11-27 07:37:42 -06:00 |
|
sam_memories.h
|
SAMA5 OHCI: Use physical address and flush and/or invalidate data caches as necessary
|
2013-08-14 12:23:06 -06:00 |
|
sam_nand.c
|
Make sure that there is one space between while and condition
|
2014-04-12 13:09:48 -06:00 |
|
sam_nand.h
|
SAMA5 NAND: Do not perform DMA on small transfers
|
2013-12-04 07:41:29 -06:00 |
|
sam_ohci.c
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_pck.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_pck.h
|
SAMA5 PCK: Add support for programmable clock outputs
|
2013-11-14 11:16:04 -06:00 |
|
sam_periphclks.h
|
SAMA5 UDPHS: Support USPHS clock configuration
|
2013-09-01 11:29:51 -06:00 |
|
sam_pio.c
|
SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts
|
2013-08-06 10:20:17 -06:00 |
|
sam_pio.h
|
A10+pcDuino: PIO support, LED and button support
|
2013-12-11 13:23:40 -06:00 |
|
sam_pioirq.c
|
SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts
|
2013-08-06 10:20:17 -06:00 |
|
sam_pmc.c
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_pmc.h
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_pmecc.c
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_pmecc.h
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_pwm.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_pwm.h
|
SAMA5 PWM: Driver now in build and configuration system
|
2013-11-06 12:24:51 -06:00 |
|
sam_rtc.c
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_rtc.h
|
SAMA5: Initial WDT timer (untested)
|
2013-10-19 12:26:47 -06:00 |
|
sam_serial.c
|
Fix typo introduced to the serial driver when the DBGU driver was added
|
2014-04-02 09:02:15 -06:00 |
|
sam_serial.h
|
Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts
|
2013-08-03 08:22:37 -06:00 |
|
sam_spi.c
|
SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work.
|
2014-03-13 15:54:09 -06:00 |
|
sam_spi.h
|
Backport SPI driver enhancements from SAMA5 to SAM3/4
|
2014-03-13 10:34:35 -06:00 |
|
sam_ssc.c
|
SAMA5 SSC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 10:58:23 -06:00 |
|
sam_ssc.h
|
SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver
|
2013-11-07 12:26:53 -06:00 |
|
sam_tc.c
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_tc.h
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_timerisr.c
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
sam_trng.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_trng.h
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
sam_tsd.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_tsd.h
|
SAMA5: ADC and touchscreen drivers now build without errors
|
2013-10-03 14:32:21 -06:00 |
|
sam_twi.c
|
SAMA5 TWI: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals
|
2014-04-16 12:09:55 -06:00 |
|
sam_twi.h
|
SAMA5: Framework for a TWI driver (incomplete)
|
2013-09-11 12:28:52 -06:00 |
|
sam_udphs.c
|
Updated README files and comments
|
2014-04-07 07:43:28 -06:00 |
|
sam_udphs.h
|
SAMA UDPHS: Add pull-up and stall logic. Added to build system but does not yet build
|
2013-08-31 17:37:51 -06:00 |
|
sam_usbhost.c
|
STM32 OTGFS: Host USB tracing instrumentation added by Leo
|
2014-04-12 08:44:22 -06:00 |
|
sam_usbhost.h
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_wdt.c
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_wdt.h
|
SAMA5 WDT: Miss watchdog fixes
|
2013-10-20 08:24:05 -06:00 |
