| .. |
|
chip
|
SAMA5 timer/counter: Add support for a one-shot timer wrapper around the low-level timer/counter logic. This also involved several changes that rippled into the ADC driver (untested).
|
2014-08-09 15:27:55 -06:00 |
|
chip.h
|
rch/arm/armv7-a/l2cc_pl310.h: Move arch/arm/sama5/chip/sam_l2cc.h to arch/arm/armv7-a/l2cc_pl310.h. Adjust the two corresponding Kconfig files as well.
|
2014-07-25 17:25:17 -06:00 |
|
Kconfig
|
Update comments
|
2014-08-10 11:38:08 -06:00 |
|
Make.defs
|
SAMA5: Use the one-shot and free-running timers to implement tickless OS support for SAMA5
|
2014-08-09 17:14:51 -06:00 |
|
sam_adc.c
|
SAMA5 timer/counter: Add support for a one-shot timer wrapper around the low-level timer/counter logic. This also involved several changes that rippled into the ADC driver (untested).
|
2014-08-09 15:27:55 -06:00 |
|
sam_adc.h
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
sam_allocateheap.c
|
SAMA5D3/4 HEAP: Add a configuration option to reserve DRAM for a framebuffer when executing out of DRAM.
|
2014-07-08 12:43:38 -06:00 |
|
sam_boot.c
|
ARM: Move L2 cache initialization to much later in the sequence
|
2014-07-27 10:03:33 -06:00 |
|
sam_can.c
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
sam_can.h
|
SAMA5 CAN: Driver is now code complete but still untested
|
2013-10-22 15:47:52 -06:00 |
|
sam_clockconfig.c
|
SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why.
|
2014-07-03 12:28:11 -06:00 |
|
sam_clockconfig.h
|
Move the un-definitions of __ramfuncs__ from the sam_clockconfig.c to the common up_internal.h header file so that the attribute will be applied the same to function definitions and prototypes.
|
2014-04-17 08:56:20 -06:00 |
|
sam_dbgu.c
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
sam_dbgu.h
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
sam_dmac.c
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
sam_dmac.h
|
XDMAC register sampling missed CIM register; Should not set SWREQ bit in DMA setup
|
2014-07-21 13:23:36 -06:00 |
|
sam_ehci.c
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
sam_emaca.c
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
sam_emacb.c
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
sam_ethernet.c
|
SAMA5D4: Add EMAC driver
|
2014-06-11 12:23:31 -06:00 |
|
sam_ethernet.h
|
SAMA5: Add support for Micrel KSZ8081 PHY
|
2014-06-11 13:25:59 -06:00 |
|
sam_freerun.c
|
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
|
2014-08-10 10:47:38 -06:00 |
|
sam_freerun.h
|
SAMA5 free-running timer: Add support for a free-running timer wrapper around the low-level timer/counter logic.
|
2014-08-09 16:43:48 -06:00 |
|
sam_gf512.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_gf1024.c
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_gmac.c
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
sam_hsmci_clkdiv.c
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_hsmci.c
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
sam_hsmci.h
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_irq.c
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
sam_irq.h
|
SAMA5 interrupt handling logic
|
2013-07-22 11:54:39 -06:00 |
|
sam_isi.c
|
SAMA5 PCK: Add support for the slow clock as the PCK clock source
|
2014-07-19 13:55:08 -06:00 |
|
sam_isi.h
|
SAMA5 ISI: Framework for ISI drivers. Not much there on initial check-in
|
2013-11-14 11:17:00 -06:00 |
|
sam_lcd.c
|
SAMA5 LCDC: Back out the delay kludge. Increase the LCDC input clock from MCK to 2*MCK was sufficient for all timing instbility problems
|
2014-07-12 11:24:14 -06:00 |
|
sam_lcd.h
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
sam_lowputc.c
|
SAMA5D4: USART peripheral clock appears to be MCK/2
|
2014-06-20 11:40:36 -06:00 |
|
sam_lowputc.h
|
SAMA5 interrupt handling logic
|
2013-07-22 11:54:39 -06:00 |
|
sam_memories.c
|
SAMA5D3/4: Fix some logic in conversion of physical and virtal DRAM addresses when running out of DRAM
|
2014-06-30 11:04:34 -06:00 |
|
sam_memories.h
|
SAMA5 OHCI: Use physical address and flush and/or invalidate data caches as necessary
|
2013-08-14 12:23:06 -06:00 |
|
sam_nand.c
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
sam_nand.h
|
SAMA5 NAND: Do not perform DMA on small transfers
|
2013-12-04 07:41:29 -06:00 |
|
sam_ohci.c
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
sam_oneshot.c
|
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
|
2014-08-10 10:47:38 -06:00 |
|
sam_oneshot.h
|
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
|
2014-08-10 10:47:38 -06:00 |
|
sam_pck.c
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
sam_pck.h
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
sam_periphclks.h
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
sam_pio.c
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
sam_pio.h
|
SAMA5 PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a a vanilla input first so that final pin configuration is more read-able (i.e., easier to debug)
|
2014-07-09 17:16:43 -06:00 |
|
sam_pioirq.c
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
sam_pmc.c
|
SAMA5D4: Completes PMC modifications for the SAMA5D4
|
2014-06-09 07:55:51 -06:00 |
|
sam_pmc.h
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
sam_pmecc.c
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_pmecc.h
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
sam_pwm.c
|
SAMA5D4: Update PWM header file
|
2014-06-08 14:16:50 -06:00 |
|
sam_pwm.h
|
SAMA5 PWM: Driver now in build and configuration system
|
2013-11-06 12:24:51 -06:00 |
|
sam_rtc.c
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_rtc.h
|
SAMA5: Initial WDT timer (untested)
|
2013-10-19 12:26:47 -06:00 |
|
sam_sckc.c
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
sam_sckc.h
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
sam_serial.c
|
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
|
2014-08-08 18:39:28 -06:00 |
|
sam_serial.h
|
Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts
|
2013-08-03 08:22:37 -06:00 |
|
sam_spi.c
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
sam_spi.h
|
Backport SPI driver enhancements from SAMA5 to SAM3/4
|
2014-03-13 10:34:35 -06:00 |
|
sam_ssc.c
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
sam_ssc.h
|
SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver
|
2013-11-07 12:26:53 -06:00 |
|
sam_tc.c
|
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
|
2014-08-10 10:47:38 -06:00 |
|
sam_tc.h
|
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
|
2014-08-10 10:47:38 -06:00 |
|
sam_tickless.c
|
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
|
2014-08-10 10:47:38 -06:00 |
|
sam_timerisr.c
|
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
|
2014-08-06 16:26:01 -06:00 |
|
sam_trng.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
sam_trng.h
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
sam_tsd.c
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
sam_tsd.h
|
SAMA5: ADC and touchscreen drivers now build without errors
|
2013-10-03 14:32:21 -06:00 |
|
sam_twi.c
|
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
|
2014-08-07 18:00:38 -06:00 |
|
sam_twi.h
|
SAMA5: Framework for a TWI driver (incomplete)
|
2013-09-11 12:28:52 -06:00 |
|
sam_udphs.c
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
sam_udphs.h
|
SAMA UDPHS: Add pull-up and stall logic. Added to build system but does not yet build
|
2013-08-31 17:37:51 -06:00 |
|
sam_usbhost.c
|
STM32 OTGFS: Host USB tracing instrumentation added by Leo
|
2014-04-12 08:44:22 -06:00 |
|
sam_usbhost.h
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_wdt.c
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
sam_wdt.h
|
SAMA5 WDT: Miss watchdog fixes
|
2013-10-20 08:24:05 -06:00 |
|
sam_xdmac.c
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
sama5d3x_periphclks.h
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
sama5d4x_periphclks.h
|
SAMA5D4: Fix peripheral clocking macros: AIC and L2CC are continuously clocked
|
2014-06-19 15:52:42 -06:00 |
