Gregory Nutt
|
774a24a2c2
|
SAMA5: Cosmetic updates to comments and README files
|
2014-04-03 15:30:00 -06:00 |
|
Gregory Nutt
|
c00a3ce914
|
SAMA5: When booting from SDRAM, don't copy vectors to ISRAM. Instread just set the VBAR register to add address of the vectors in SDRAM
|
2014-04-03 14:09:11 -06:00 |
|
Gregory Nutt
|
362d539914
|
If LOWVECTORS is selected, then we need to clear the VBAR register. A bootloader may have left the VBAR in an bad state
|
2014-04-03 13:09:30 -06:00 |
|
Gregory Nutt
|
e3d2117b29
|
SAMA5: Make sure the MMU and caches are disabled on power up; flush the vector region D-Cache after copying interrupt vectors; make sure that D-Cache, I-Cache, and TLBs are invalidated after modifying the AXI MATRIX remapping
|
2014-04-02 16:27:00 -06:00 |
|
Gregory Nutt
|
3a1e08bc3c
|
SAMA5: When running from SRAM, vectors must lie in ISRAM
|
2014-04-02 12:54:15 -06:00 |
|
Gregory Nutt
|
7372485e16
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
df7429add0
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
c6685c7f7d
|
Fix typo introduced to the serial driver when the DBGU driver was added
|
2014-04-02 09:02:15 -06:00 |
|
Gregory Nutt
|
c0bf638798
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
cec5d575c0
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
4a37d6b042
|
SAMA5: Add DBGU register definition header file
|
2014-03-31 17:25:16 -06:00 |
|
Gregory Nutt
|
cd45038326
|
Remove double mapping of SDRAM when running from SDRAM
|
2014-03-31 15:08:04 -06:00 |
|
Gregory Nutt
|
bb7fbad8bd
|
cosmetic updates to comments
|
2014-03-30 10:25:01 -06:00 |
|
Gregory Nutt
|
9767d1f976
|
Fix some backward conditional compilation
|
2014-03-30 08:29:21 -06:00 |
|
Gregory Nutt
|
406e91e262
|
SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file
|
2014-03-30 08:00:59 -06:00 |
|
Gregory Nutt
|
eacf905089
|
Fix a rounding problem in HSMCI divider calculation
|
2014-03-29 18:13:00 -06:00 |
|
Gregory Nutt
|
c20f9c71b1
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
ff594d859e
|
SAMA5: Add functions to calculate PLLACK, PCK, and MCK frequencies given the main clock frequency
|
2014-03-29 15:54:10 -06:00 |
|
Gregory Nutt
|
797f149481
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
73f0ff6c47
|
Documentatin updated; fix errors in some comments
|
2014-03-28 09:52:07 -06:00 |
|
Gregory Nutt
|
1b11e89c25
|
Add support for the SAMA5D36
|
2014-03-28 08:33:01 -06:00 |
|
Gregory Nutt
|
32ca368f16
|
Fix a warning that happens with debug is disabled
|
2014-03-26 16:32:38 -06:00 |
|
Gregory Nutt
|
e5360ef5d9
|
SAM4E CMCC: Fix some errors introducted in last check-in
|
2014-03-26 16:32:16 -06:00 |
|
Gregory Nutt
|
8f7d58c011
|
Eliminate some warnings
|
2014-03-26 16:31:26 -06:00 |
|
Gregory Nutt
|
67695a2248
|
SAM3/4: SPI and HSCMI drivers with now use the CMCC is available; The SPI driver will now handle word sizes greater than 8-bits
|
2014-03-26 13:19:44 -06:00 |
|
Gregory Nutt
|
be88e99ec8
|
SAM4E USP: Re-vamp read request queue handling. Add logic to handle RX overrun errors
|
2014-03-26 11:38:47 -06:00 |
|
Gregory Nutt
|
d2001a1dc3
|
tools/astyle.sh: Formatting tool based on logic from Lorenz Meier
|
2014-03-26 08:50:48 -06:00 |
|
Gregory Nutt
|
f1e6ea46ed
|
SAMA5D3: Fix some typos in last blind changes backported from the SAM4e. And verified
|
2014-03-25 16:11:33 -06:00 |
|
Gregory Nutt
|
9a724d8b36
|
backport a serial console fix from the sam4e to the sama5d3
|
2014-03-25 14:34:07 -06:00 |
|
Gregory Nutt
|
9b5e800cc0
|
SAM3/4 CMCC: if region to be invalidate is bigger than that cache, then invalidate all
|
2014-03-25 14:25:22 -06:00 |
|
Gregory Nutt
|
99f9239a00
|
SAM3/4 Serial: Fix a mysterious multi-tasking bug that can lock up the serial port
|
2014-03-25 12:44:03 -06:00 |
|
Gregory Nutt
|
3425d20072
|
SAM3/4 HSMCI: Update configuration names to match last change to Kconfig
|
2014-03-24 17:42:28 -06:00 |
|
Gregory Nutt
|
fa3f78c821
|
Add missing HSCMI configuration options; Make HSMCI configuration naming more compatible; Fix HSCMI clocking to use the CLKODD bit
|
2014-03-24 14:25:40 -06:00 |
|
Gregory Nutt
|
ff7c62574a
|
SAM3/4 HSCMI: Another fix for complication with SAM4E
|
2014-03-24 10:25:02 -06:00 |
|
Gregory Nutt
|
eddfa4222f
|
STM32 EMAC: Add support for IGMP hash table update. From Manuel Stühn
|
2014-03-24 09:32:48 -06:00 |
|
Gregory Nutt
|
f2d44cd8db
|
SAM3/4: Changes for clean HSMCI compilation
|
2014-03-23 15:52:14 -06:00 |
|
Gregory Nutt
|
f613048460
|
SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ
|
2014-03-23 15:51:34 -06:00 |
|
Gregory Nutt
|
b8ea1d49a8
|
SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ
|
2014-03-23 15:51:08 -06:00 |
|
Gregory Nutt
|
6b4a4c8293
|
SAM4E-EK: Enable interrupt stack in all configurations
|
2014-03-23 10:12:57 -06:00 |
|
Gregory Nutt
|
788d5bb0fc
|
Add logic to check interrupt stack usage
|
2014-03-23 10:11:58 -06:00 |
|
Gregory Nutt
|
88d0375f38
|
AVR assertion logic will report stack usage on crash if DEBUG_STACK is set
|
2014-03-23 10:11:14 -06:00 |
|
Gregory Nutt
|
c41976f23c
|
Clean-up AVR stack colorization logic
|
2014-03-23 10:09:53 -06:00 |
|
Gregory Nutt
|
82c9694c5b
|
All ARM Make.defs files should build up_checkstack.c if DEBUG_STACK is enabled
|
2014-03-23 10:07:52 -06:00 |
|
Gregory Nutt
|
5ac5506b35
|
All ARM assertion logic will show stack usage on assertion if DEBUG_STACK is enabled
|
2014-03-23 10:06:48 -06:00 |
|
Gregory Nutt
|
b6784677d0
|
Every ARM architecture must export g_instackbase
|
2014-03-23 10:05:21 -06:00 |
|
Gregory Nutt
|
e5f99798b8
|
SAM4E-EK UDP: prevent some bad recursive behavior
|
2014-03-22 17:30:17 -06:00 |
|
Gregory Nutt
|
4f54eb397d
|
SAM3/4 lowputc: Fix compile errors when there is no serial console
|
2014-03-22 10:18:06 -06:00 |
|
Gregory Nutt
|
4baa2c294f
|
SAM4E UDP: Fix handling of GLBSTAT:CONFIG bit. Was not being set
|
2014-03-21 13:31:45 -06:00 |
|
Gregory Nutt
|
3e177a7ba7
|
SAM4E UDP: Cosmetic updates to tracing and README
|
2014-03-21 10:45:12 -06:00 |
|
Gregory Nutt
|
1b5a599fc5
|
If DCD supports queuing of stall requests then USB MSC delay work-around is not necessary
|
2014-03-20 15:20:24 -06:00 |
|
Gregory Nutt
|
788fc5399d
|
SAM4E UDP: Several fixes related to bulk endpoint transfers
|
2014-03-20 14:25:56 -06:00 |
|
Gregory Nutt
|
5b9f1f54c2
|
Add option to dump buffered USB trace data on an assertion
|
2014-03-20 10:56:30 -06:00 |
|
Gregory Nutt
|
055a134a36
|
SAM4E UDP: Fix errors associated with OUT packet size handling and bank interrupt bit handling
|
2014-03-19 18:02:57 -06:00 |
|
Gregory Nutt
|
7f587876f7
|
SAM4E: Fix handling of CSR:DIR bit
|
2014-03-19 13:34:15 -06:00 |
|
Gregory Nutt
|
4b93209d36
|
SAM4E UDP: Fix to handling of FADDR:FEN and CSR:TXCOMP
|
2014-03-19 12:20:42 -06:00 |
|
Gregory Nutt
|
9e68a2690f
|
LPC17 USB Host: Minor clean-up after performing some regressin testing
|
2014-03-19 08:33:15 -06:00 |
|
Gregory Nutt
|
f713b4937c
|
Improved description of CONFIG_ARMV7M_USEBASEPRI from Vijay Kumar
|
2014-03-19 07:16:44 -06:00 |
|
Gregory Nutt
|
fd3318a05e
|
SAM4E UDP: Fix FIFO reset logic
|
2014-03-18 17:24:50 -06:00 |
|
Gregory Nutt
|
1da26f8f04
|
SAM4E UDP: Remove spurious clearing of RXSETUP
|
2014-03-18 15:19:45 -06:00 |
|
Gregory Nutt
|
82c93c91ea
|
SAM4E UDP: Now receives one setup packet before dying
|
2014-03-18 12:38:34 -06:00 |
|
Gregory Nutt
|
c35470d553
|
TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho
|
2014-03-18 11:21:31 -06:00 |
|
Gregory Nutt
|
7e2436d4cc
|
SAM4E: Fix a few more UDP bring-up bugs. Still not working
|
2014-03-18 11:00:20 -06:00 |
|
Gregory Nutt
|
d5364f85b2
|
SAM4E: Revise board-specific USB MSC support
|
2014-03-18 09:31:02 -06:00 |
|
Gregory Nutt
|
2e586f04ab
|
SAM4E: Add USB full speed device (UDP) driver
|
2014-03-17 12:37:55 -06:00 |
|
Gregory Nutt
|
b74e183dac
|
SAM3/4: Fleshing out environment to support USB device (UDP)
|
2014-03-16 14:11:22 -06:00 |
|
Gregory Nutt
|
1d1b0e84c8
|
SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts
|
2014-03-14 11:57:42 -06:00 |
|
Gregory Nutt
|
adcfb40d01
|
SAM3/4 DMA fixes in general for SPI DMA in particular
|
2014-03-14 11:25:16 -06:00 |
|
Gregory Nutt
|
483fcdca03
|
SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work.
|
2014-03-13 15:54:09 -06:00 |
|
Gregory Nutt
|
d32b85a938
|
SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash
|
2014-03-13 14:07:35 -06:00 |
|
Gregory Nutt
|
c0c2fc4afe
|
Backport SPI driver enhancements from SAMA5 to SAM3/4
|
2014-03-13 10:34:35 -06:00 |
|
Gregory Nutt
|
a300a46c8d
|
SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default
|
2014-03-13 09:03:03 -06:00 |
|
Gregory Nutt
|
fe9460d314
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
Gregory Nutt
|
907d273c4a
|
SAM4E: Add support for the Cortex-M Cache Control block
|
2014-03-12 12:38:39 -06:00 |
|
Gregory Nutt
|
8e6bfea5aa
|
SAM4E: Various bring-up fixes. NSH now works
|
2014-03-12 10:59:19 -06:00 |
|
Gregory Nutt
|
dfdad8c95b
|
TM4C: Fix typos in memory map reported by Daniel Pereira de Carvalho
|
2014-03-12 07:23:58 -06:00 |
|
Gregory Nutt
|
f2f80f0813
|
SAM4E-EK: Purely cosmetic updates
|
2014-03-11 10:44:00 -06:00 |
|
Gregory Nutt
|
6638022126
|
SAM4E-EK: Add basic board support
|
2014-03-10 15:18:46 -06:00 |
|
Gregory Nutt
|
b25d2ace89
|
TM4C: A few more changes to get a clean compilation
|
2014-03-10 11:54:20 -06:00 |
|
Gregory Nutt
|
a659029017
|
Make sure that every reference to LM4F has corresponding logic for TM4C
|
2014-03-10 11:23:50 -06:00 |
|
Gregory Nutt
|
4a199188c8
|
TM4C: Add SYSCONTROL register defintion header file
|
2014-03-10 10:17:37 -06:00 |
|
Gregory Nutt
|
c9e6775d0c
|
Add support for TM4C GPIOs
|
2014-03-10 08:12:35 -06:00 |
|
Gregory Nutt
|
967d48fbfb
|
TIVA: Add memory map for the TM4C123
|
2014-03-09 13:57:35 -06:00 |
|
Gregory Nutt
|
8e08a25f11
|
Add pin multiplex definitions for the TM4C123
|
2014-03-09 13:15:09 -06:00 |
|
Gregory Nutt
|
7ac3ada62a
|
TM4C: Add definitions for GPIO interrupts
|
2014-03-09 10:00:31 -06:00 |
|
Gregory Nutt
|
1c3627901f
|
Add TM4C123 to the configuration system
|
2014-03-09 09:40:48 -06:00 |
|
Gregory Nutt
|
9889391ab8
|
Oop.. everything was named TM3C instead of TM4C in the last check-in
|
2014-03-09 09:26:29 -06:00 |
|
Gregory Nutt
|
b10bc3238b
|
TM3C123: Add chip characteristics and interrupt definition files
|
2014-03-09 09:21:06 -06:00 |
|
Gregory Nutt
|
cb10073586
|
Hmmm.. not sure what happened but here is a missing TIVA file
|
2014-03-08 16:33:56 -06:00 |
|
Gregory Nutt
|
6cd5f3d321
|
functions and definitions renamed from lm_ to tiva_
|
2014-03-08 15:50:26 -06:00 |
|
Gregory Nutt
|
8f5dfc3541
|
All files and functions beginning with lm_ changed to tiva_
|
2014-03-08 13:29:09 -06:00 |
|
Gregory Nutt
|
88c2da5bc1
|
The old lm/ directories were enamed tiva/ to better support new products coming down the pipe from TI
|
2014-03-08 12:31:06 -06:00 |
|
Gregory Nutt
|
0fb4a075d1
|
LPC2378: SPI driver from Lizhuoyi
|
2014-03-08 11:37:50 -06:00 |
|
Gregory Nutt
|
1bdc4273bb
|
LPC2378: I2C driver from Lizhuoyi
|
2014-03-08 11:03:58 -06:00 |
|
Gregory Nutt
|
729a3020a7
|
Fix some confusion in the code about vectored interrupts; fix so that it builds with prioritized interrutps disabed
|
2014-03-08 10:57:11 -06:00 |
|
Gregory Nutt
|
2f42d9f115
|
QEMU i486: Minor updates to VGA driver
|
2014-03-08 10:56:19 -06:00 |
|
Gregory Nutt
|
17faab1442
|
QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi
|
2014-03-08 09:24:46 -06:00 |
|
Gregory Nutt
|
e43c7b7f1b
|
QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi
|
2014-03-08 09:24:24 -06:00 |
|
Gregory Nutt
|
48a31eede5
|
configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 11:47:16 -06:00 |
|
Gregory Nutt
|
ea52d7d61c
|
configs/pjrc-8051: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 10:27:52 -06:00 |
|
Gregory Nutt
|
88d3bc23e1
|
onfigs/mx1ads/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 09:48:25 -06:00 |
|
Gregory Nutt
|
892c86df3c
|
configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 09:17:11 -06:00 |
|
Gregory Nutt
|
597c60a72d
|
configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 08:28:49 -06:00 |
|
Gregory Nutt
|
d62967bf8d
|
configs/ne64badge/ostest and demo9s12nec64/ostest: Configurations onverted to use the kconfig-frontends tools
|
2014-03-05 17:27:58 -06:00 |
|
Gregory Nutt
|
8fcd60b5df
|
Use common naming for rest of the toolchains too
|
2014-03-05 16:29:58 -06:00 |
|
Gregory Nutt
|
18a08fe1d1
|
Use common naming for all buildroot toolchains
|
2014-03-05 15:37:07 -06:00 |
|
Gregory Nutt
|
40621d42fc
|
Add configuration ettings for the on-demand paging option
|
2014-03-05 14:25:49 -06:00 |
|
Gregory Nutt
|
6526c47930
|
configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 12:16:02 -06:00 |
|
Gregory Nutt
|
64e5dbc534
|
configs/avr32dev1/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 11:34:25 -06:00 |
|
Gregory Nutt
|
22a1e2aef3
|
Create AVR32 Kconfig files; reshuffled lots of configuration names
|
2014-03-05 11:25:36 -06:00 |
|
Gregory Nutt
|
da289c4962
|
Create AVR32 Kconfig files; reshuffled lots of configuration names
|
2014-03-05 11:23:54 -06:00 |
|
Gregory Nutt
|
c99476c950
|
configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 08:58:01 -06:00 |
|
Gregory Nutt
|
a637978a1b
|
configs/teensy/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 15:54:38 -06:00 |
|
Gregory Nutt
|
f3168c222b
|
configs/mcu123-lpc214x/usbmsc: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 15:40:18 -06:00 |
|
Gregory Nutt
|
e4c4ab5ef2
|
onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 11:40:29 -06:00 |
|
Gregory Nutt
|
216859842a
|
configs/olimex-strp711/nettest: Converted to use kconfig-frontends tools
|
2014-03-03 10:52:02 -06:00 |
|
Gregory Nutt
|
705a68349b
|
configs/c5471evm/nettest converted use kconfig-frontends. C5471 build updated
|
2014-03-03 10:05:06 -06:00 |
|
Gregory Nutt
|
74414b9762
|
arch/arm/src/lpc2378/Kconfig: Create Kconfig for the platform; Adjust configuration names for compatibility, configs/olimex-lpc2378/nsh: Convert to use the kconfig-frontends tools
|
2014-03-02 11:08:23 -06:00 |
|
Gregory Nutt
|
740a3ce1b9
|
Removed unused configuratin variable: CONFIG_PGTABLE_VADDR
|
2014-03-01 16:21:28 -06:00 |
|
Gregory Nutt
|
210fbc3365
|
configs/lm3s8962-ek/nsh converted to use the kconfig-frontends tools
|
2014-03-01 13:29:23 -06:00 |
|
Gregory Nutt
|
07454e9241
|
configs/pic32-starterkit/nsh converted to use the kconfig-frontends tools
|
2014-03-01 11:10:30 -06:00 |
|
Gregory Nutt
|
74c50c12de
|
configs/mirtoo/nsh converted to use the kconfig-frontends tools
|
2014-03-01 10:49:19 -06:00 |
|
Gregory Nutt
|
306271d151
|
Buildroot EABI (vs OABI) is now the default
|
2014-02-28 07:49:15 -06:00 |
|
Gregory Nutt
|
885a20d929
|
SAM3/4: Cosmetic updates to ADC register defintion header files
|
2014-02-27 08:41:03 -06:00 |
|
Gregory Nutt
|
095df26ed3
|
SAM4E: Completes all SAM4E register definition header files. Also a SAMA5D3 ADc register definition fix
|
2014-02-26 17:00:22 -06:00 |
|
Gregory Nutt
|
836f83f0c9
|
SAM4E: Add AES and AFEC register definition header files (AFEC incomplete)
|
2014-02-26 15:11:20 -06:00 |
|
Gregory Nutt
|
82bd647951
|
SAM4E: Add CAN and RSWDT register definition header files
|
2014-02-26 14:14:19 -06:00 |
|
Gregory Nutt
|
07adb58099
|
SAM4E: Add EMAC register definition header file
|
2014-02-26 11:57:42 -06:00 |
|
Gregory Nutt
|
28cf673bb0
|
SAM4E: Add CMCC register definition header file
|
2014-02-26 09:25:57 -06:00 |
|
Gregory Nutt
|
623b2522ff
|
SAM4E: UDP register definition header file
|
2014-02-25 13:39:00 -06:00 |
|
Gregory Nutt
|
3d12bc9830
|
SAM3/4: Fix some build errors that crept in with the SAM4E support
|
2014-02-25 12:41:38 -06:00 |
|
Gregory Nutt
|
069f0f2d6a
|
SAM4E: Update SAM3/4 TC and DMAC register definition header files
|
2014-02-25 10:56:23 -06:00 |
|
Gregory Nutt
|
e93d2da742
|
SAM4E: Update SAM3/4 ACC, DACC, and PDC register definition header files
|
2014-02-24 14:48:33 -06:00 |
|
Gregory Nutt
|
af8760e467
|
SAM4E: Update SAM3/4 GPBR, HSMCI, PWM, RSTC, RTC, RTT, SMC, and WDT register definition header files
|
2014-02-24 12:38:19 -06:00 |
|
Gregory Nutt
|
47d8cf4e62
|
SAM4E: Update SAM3/4 SMC and SUPC register definition header files
|
2014-02-24 10:26:44 -06:00 |
|
Gregory Nutt
|
d20d82b90e
|
SAM4E: Update SAM3/4 EEFC, MATRIX, and PMC register definition header files
|
2014-02-24 09:49:02 -06:00 |
|
Gregory Nutt
|
36ead78f07
|
ARMv6-M/ARMv7-M: Correct a register handling error in signal delivery (Kernel build mode only). Noted by Mike Smith.
|
2014-02-23 08:25:49 -06:00 |
|
Gregory Nutt
|
07ae9d60e0
|
SAM4E: USART/USART header files and drivers updated to support the SAM4E
|
2014-02-22 13:46:23 -06:00 |
|
Gregory Nutt
|
956314b113
|
SAM4E: update SAM3/4 Kconfig for SAM4E peripheral selections
|
2014-02-22 11:56:04 -06:00 |
|
Gregory Nutt
|
291f4e61ca
|
Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips
|
2014-02-22 10:38:25 -06:00 |
|
Gregory Nutt
|
873ceb2d6d
|
SAM4E: Update PMC and SPI register definition header files
|
2014-02-22 10:32:28 -06:00 |
|
Gregory Nutt
|
acba69d9a4
|
SAM4E: Pin multiplex definition header file
|
2014-02-21 18:10:53 -06:00 |
|
Gregory Nutt
|
ff92f4f81f
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
Gregory Nutt
|
1b0fce86ad
|
SAM4E: Add memory map header file
|
2014-02-21 09:33:16 -06:00 |
|
Gregory Nutt
|
159938e6d8
|
SAM4E: Add vector definition header files
|
2014-02-21 08:46:16 -06:00 |
|
Gregory Nutt
|
2b4464e716
|
unlink/rm can now be used on nodes in the pseudo-filesystem. There is new configuration option to suppress these costly and mostly useless operations on the pseudo-filesystem
|
2014-02-20 18:14:02 -06:00 |
|
Gregory Nutt
|
462ea02c0c
|
SAMD20: Some progress debugging SPI. Currently hangs
|
2014-02-20 15:20:42 -06:00 |
|
Gregory Nutt
|
9c1d9e44d4
|
SAMD20: Changes for clean build of SPI driver and SAMD20 Xplained Pro board with the I/O1 module installed
|
2014-02-20 11:27:59 -06:00 |
|
Gregory Nutt
|
d2bb6f3e0f
|
SAMD20: SPI driver is code-complete, but untested
|
2014-02-20 09:59:54 -06:00 |
|
Gregory Nutt
|
07f750ba3d
|
SAMD: A little more SPI logic
|
2014-02-19 18:48:59 -06:00 |
|
Gregory Nutt
|
7f8a0a01c7
|
LM3/4: Several errors were unmasked with UARTs > UART2 were enabled. Fromo Gosha
|
2014-02-19 17:02:30 -06:00 |
|