sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
39,793 Commits 1 Branch 0 Tags 291 MiB
705c64e5ff
Commit Graph

38 Commits

Author SHA1 Message Date
Nathan Hartman
679b4fbee2 arch: Fix included directed -> included directly 
This typo had been copied and pasted into numerous irq and syscall
headers.
 2020-04-05 22:31:15 +01:00
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189) 
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
 2020-01-31 09:24:49 -06:00
Dave Marples
d0cda60442 In the current implementation we only use very high priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but that means there are loads of lower priority ones that are effectively unused. I have *not* changed the semantics of these levels but have 'shifted' them to be based around the midpoint of the available interrupts (0x80) rather than at the top end....that allows for interrupts to be defined above (or, indeed, below) them as needed by the application. This should have no functional effect on existing code but adds in a clean capability to define higher priority interrupts. 2018-12-03 17:41:59 -06:00
Gregory Nutt
cb374e6e62 arch/: Clean up some naming and spacing. 2018-06-20 15:38:06 -06:00
Wolfgang Reißnegger
a22dc9b1a8 SAM3/4: Add support for ATSAM4S4C. 2017-01-18 11:56:51 -08:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
29136e51cc Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
d8561fbcae Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
Gregory Nutt
fae790a6dc Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Gregory Nutt
fb774d677c Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona 2014-05-14 07:48:47 -06:00
Gregory Nutt
697b0d5b61 correct some columnar alignment and spacing 2014-05-13 14:14:57 -06:00
Gregory Nutt
f613048460 SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ 2014-03-23 15:51:34 -06:00
Gregory Nutt
483fcdca03 SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work. 2014-03-13 15:54:09 -06:00
Gregory Nutt
6638022126 SAM4E-EK: Add basic board support 2014-03-10 15:18:46 -06:00
Gregory Nutt
d20d82b90e SAM4E: Update SAM3/4 EEFC, MATRIX, and PMC register definition header files 2014-02-24 09:49:02 -06:00
Gregory Nutt
159938e6d8 SAM4E: Add vector definition header files 2014-02-21 08:46:16 -06:00
Gregory Nutt
05cf59feef Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
Gregory Nutt
29c43b0b24 Fixes a few more high priority, nested interrupt logic 2013-12-23 11:13:56 -06:00
Gregory Nutt
3855ce04e8 Beginning of high priority nested interrupt support for the ARMv7-M family 2013-12-21 11:03:38 -06:00
Gregory Nutt
c615f6e6fd Support for the Atmel SAM4E family. From Mitko 2013-11-11 07:45:09 -06:00
Gregory Nutt
8f41963efd With these changes the Arduino Due port builds without errors 2013-06-27 15:07:07 -06:00
Gregory Nutt
2ecac742b6 Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system 2013-06-27 14:24:27 -06:00
Gregory Nutt
77b36e0bc1 Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
Gregory Nutt
8865cf8be0 Add SAM3X/3A interrupt vectors 2013-06-26 12:59:56 -06:00
Gregory Nutt
2812f5be67 Add support for SAM3X and 3A chips, interrupts, and peripheral IDs 2013-06-26 12:28:32 -06:00
Gregory Nutt
e6a3078b77 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
677365210e SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional 2013-06-12 10:56:42 -06:00
Gregory Nutt
ea776434ba Changes for a clean build of configs/sam4s-xplained 2013-06-11 17:33:43 -06:00
Gregory Nutt
93ee6cb291 SAM4S: Add pin multiplexing definitions 2013-06-11 14:32:07 -06:00
Gregory Nutt
3fb47dae74 SAM4S: GPIO, chip characteristics, peripheral Kconfig 2013-06-11 12:28:31 -06:00
Gregory Nutt
6576156731 SAM4S: Add memory map and interrupt logic 2013-06-10 16:18:47 -06:00
Gregory Nutt
77f84ae94d Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board 2013-06-03 15:11:56 -06:00
Gregory Nutt
9e8ed732da Add vector and chip cability definitions for the SAM4L family 2013-06-03 11:23:41 -06:00
Gregory Nutt
d4b3514c85 Add interrupt and memory map definitions for the AT91SAM4L 2013-06-03 09:32:04 -06:00
Gregory Nutt
e9859095dc Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00