sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5,236 Commits 1 Branch 0 Tags 291 MiB
706d50d97a
Commit Graph

5236 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
706d50d97a Merge branch 'master' of bitbucket.org:nuttx/arch 2015-08-24 13:46:19 -06:00
Gregory Nutt
c9603b27c0 sim: Add logic to initialize the local loopback device is so configured 2015-08-24 13:46:05 -06:00
Gregory Nutt
bddc4dbd6a LPC17: Fix RAM vector table alignment for the LPC17 family. The ARMv7-M TRM only requires 128-byte alignment for vector tables; the LPC17, however, requires 256 byte alignment 2015-08-23 17:17:14 -06:00
Gregory Nutt
065f2d6057 SAMV7 USBHS DCD: Add logic to detect high speed mode; use DEBUGASSERT to check input parameters 2015-08-22 08:58:38 -06:00
David Sidrane
6559c8994a Remove the word NOT - that was used to test the fix. 2015-08-21 18:51:28 -06:00
David Sidrane
390c777a2a Removed the word NOT - that was used to test the fix. 2015-08-21 18:40:20 -06:00
Pavel Pisa
2fafe1c817 arch/arm/src/lpc17: Actually implement options to use external SDRAM and or SRAM for the heap. From Pavel Pisa 2015-08-21 18:28:59 -06:00
Gregory Nutt
4c0d36740d Some of the last review chnages were still in the editor 2015-08-21 18:25:10 -06:00
Gregory Nutt
9a32e907df Trivial, cosmetic changes from review of merge 2015-08-21 18:22:57 -06:00
Gregory Nutt
4e347080e6 Update comments in Kconfig file 2015-08-21 18:15:09 -06:00
Gregory Nutt
16c5be9767 Merged in david_s5/arch/upstream_446 (pull request #7) 
Upstream_446
 2015-08-21 18:11:05 -06:00
David Sidrane
9d64050d68 Added Changes to support for the new USB OTG controller for F446 register map 2015-08-21 13:57:08 -10:00
David Sidrane
7c96342c63 Break the stm32_otg.h into an stm32fxxxxx and stm32f44xx (should work on F7) versions 2015-08-21 13:55:06 -10:00
David Sidrane
5d1ff3f7e1 Use read modify write on PLL and CFG registers 2015-08-21 13:22:09 -10:00
David Sidrane
1c746edceb Added PLL P constants 2015-08-21 13:20:16 -10:00
Gregory Nutt
972f67ce42 SAMV7 QSPI: Add framework for a QSPI driver. Initial commit is just the SPI driver with some name changes 2015-08-21 14:22:47 -06:00
Gregory Nutt
f6c6723d88 SAMV7 USBHS Device: After aligning DMA buffers and disabling write-back data cache, the DCD driver is fully functional using the CDC/ACM device 2015-08-21 12:30:29 -06:00
Gregory Nutt
da6c5aabdf All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa 2015-08-21 08:42:24 -06:00
Gregory Nutt
0b3b104b74 Remove unnecessary step in previous commit 2015-08-20 16:21:45 -06:00
Pavel Pisa
387f76d455 This fix allows to run NuttX from SRAM or to place it after bootloader when run from Flash. From Pavel Pisa 2015-08-20 07:46:18 -06:00
Gregory Nutt
5196a4183c SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address 2015-08-19 11:36:38 -06:00
Gregory Nutt
0db7ac92d9 Minor coding style fixes in last commit; remove some unneeded debug output 2015-08-19 07:54:46 -06:00
Gregory Nutt
098f1035fc Merged in seanshpark/nuttx_arch/stm32net (pull request #6) 
STM32: Fix eth mem leak in recvframe
 2015-08-19 07:49:30 -06:00
SaeHie Park
75626fb071 STM32: Fix eth mem leak in recvframe 2015-08-19 15:40:04 +09:00
Gregory Nutt
cfd4f943da SAMV7 MCAN: When bitrate is changed, the MCAN has to be reset and there are lots of issues related to getting back to a healthy state if there is multithreaded access to the MCAN device. This commit handles a few of those issues, but there are more 2015-08-18 11:56:07 -06:00
Gregory Nutt
4b96605f93 SAMV7 MAN: Add support for bit timing IOCTL commands 2015-08-18 11:20:22 -06:00
Gregory Nutt
ff84e67e59 SAMV7 MCAN: Add logic to report CAN errors 2015-08-18 08:48:13 -06:00
Gregory Nutt
b7d6720a23 All CAN drivers: Set the new error indication to zero in the CAN message report 2015-08-18 07:24:12 -06:00
Gregory Nutt
c01d3298e5 Merged in paulpatience/nuttx-arch (pull request #5) 
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, STM32F303RD, and STM32F303RE devices.
 2015-08-17 12:55:32 -06:00
Paul A. Patience
c800841632 Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, 
STM32F303C8, STM32F303RD, and STM32F303RE devices.
 2015-08-17 14:00:49 -04:00
Gregory Nutt
531456d20c Fix deadlock when closing the MCAN device driver 2015-08-17 11:49:20 -06:00
Gregory Nutt
4f122d5290 SAMV71 MCAN: Default clock source should be MCK, not MAIN 2015-08-17 11:03:15 -06:00
Gregory Nutt
ff38abf580 SAMV7 MCAN: Should support standard CAN IDs in extended ID mode 2015-08-17 10:52:58 -06:00
Gregory Nutt
ba6c0b3fa3 Fix more common typos 2015-08-16 11:06:29 -06:00
Gregory Nutt
e29220183a Fix some common typos 2015-08-16 10:59:10 -06:00
Gregory Nutt
9e5e91c204 SAMV7 USBHS device: Fix backward test of TXINIT. Driver now appears to be functional 2015-08-16 08:55:44 -06:00
Gregory Nutt
b503bf6ca1 SAMV7 USB device: Fix base address of USBHS RAM; remove a bad assertion; fix clearing of endpoint interrupts 2015-08-15 13:00:32 -06:00
Gregory Nutt
9d7301f474 SAMV7 USBHS device: Need to enable endpoint before configuring it; Check for USB suspended backward 2015-08-15 10:41:15 -06:00
Gregory Nutt
651317ee49 SAML21: Various SERCOM fixes 2015-08-14 18:11:02 -06:00
Gregory Nutt
348060f5d2 SAMV7: Add QSPI Register Definition Header File 2015-08-14 18:11:01 -06:00
Gregory Nutt
150f79a198 Backout commit e03b47b6e28ca98a6cc8497ad822309de5153eb3 2015-08-14 10:24:56 -06:00
Gregory Nutt
a44a208ff6 SAMV71 MCAN: Change Kconfig so that zero is no longer the default value for the size of RXFIFO0, RXFIFO1, and TXFIFIQ. In fact, zero is not an illegal value 2015-08-13 08:13:49 -06:00
Gregory Nutt
bef5eb0bc9 Fix a typo in a preprocessor warning 2015-08-12 15:32:46 -06:00
Gregory Nutt
b9d4ead73f SAMV7 MCAN: Correct usage of PCLK prescaler. From Frank Benkert 2015-08-12 11:17:03 -06:00
Gregory Nutt
53638b10dc SAMV7 USBHS device: Modify how ATTACH is performed if the use host has already reset 2015-08-12 11:13:18 -06:00
Gregory Nutt
68932c02d3 Fix typos in SAMV7 MCAN. From Frank Benkert 2015-08-12 08:17:50 -06:00
Gregory Nutt
2264c1fa64 SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled 2015-08-11 15:48:26 -06:00
Gregory Nutt
f3d1c19965 SAMV7 SPI slave: Loop in the interrupt handler; RDRF and TXNE events should occur very closely in time 2015-08-11 09:30:24 -06:00
Gregory Nutt
27733a6731 Trivial spacing change 2015-08-11 07:51:31 -06:00
Gregory Nutt
9f4e033f4c MoxART: Trivial changes from code review 2015-08-10 11:05:09 -06:00