Gregory Nutt
|
972f67ce42
|
SAMV7 QSPI: Add framework for a QSPI driver. Initial commit is just the SPI driver with some name changes
|
2015-08-21 14:22:47 -06:00 |
|
Gregory Nutt
|
f6c6723d88
|
SAMV7 USBHS Device: After aligning DMA buffers and disabling write-back data cache, the DCD driver is fully functional using the CDC/ACM device
|
2015-08-21 12:30:29 -06:00 |
|
Gregory Nutt
|
da6c5aabdf
|
All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa
|
2015-08-21 08:42:24 -06:00 |
|
Gregory Nutt
|
5196a4183c
|
SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address
|
2015-08-19 11:36:38 -06:00 |
|
Gregory Nutt
|
cfd4f943da
|
SAMV7 MCAN: When bitrate is changed, the MCAN has to be reset and there are lots of issues related to getting back to a healthy state if there is multithreaded access to the MCAN device. This commit handles a few of those issues, but there are more
|
2015-08-18 11:56:07 -06:00 |
|
Gregory Nutt
|
4b96605f93
|
SAMV7 MAN: Add support for bit timing IOCTL commands
|
2015-08-18 11:20:22 -06:00 |
|
Gregory Nutt
|
ff84e67e59
|
SAMV7 MCAN: Add logic to report CAN errors
|
2015-08-18 08:48:13 -06:00 |
|
Gregory Nutt
|
b7d6720a23
|
All CAN drivers: Set the new error indication to zero in the CAN message report
|
2015-08-18 07:24:12 -06:00 |
|
Gregory Nutt
|
531456d20c
|
Fix deadlock when closing the MCAN device driver
|
2015-08-17 11:49:20 -06:00 |
|
Gregory Nutt
|
4f122d5290
|
SAMV71 MCAN: Default clock source should be MCK, not MAIN
|
2015-08-17 11:03:15 -06:00 |
|
Gregory Nutt
|
ff38abf580
|
SAMV7 MCAN: Should support standard CAN IDs in extended ID mode
|
2015-08-17 10:52:58 -06:00 |
|
Gregory Nutt
|
e29220183a
|
Fix some common typos
|
2015-08-16 10:59:10 -06:00 |
|
Gregory Nutt
|
9e5e91c204
|
SAMV7 USBHS device: Fix backward test of TXINIT. Driver now appears to be functional
|
2015-08-16 08:55:44 -06:00 |
|
Gregory Nutt
|
b503bf6ca1
|
SAMV7 USB device: Fix base address of USBHS RAM; remove a bad assertion; fix clearing of endpoint interrupts
|
2015-08-15 13:00:32 -06:00 |
|
Gregory Nutt
|
9d7301f474
|
SAMV7 USBHS device: Need to enable endpoint before configuring it; Check for USB suspended backward
|
2015-08-15 10:41:15 -06:00 |
|
Gregory Nutt
|
348060f5d2
|
SAMV7: Add QSPI Register Definition Header File
|
2015-08-14 18:11:01 -06:00 |
|
Gregory Nutt
|
150f79a198
|
Backout commit e03b47b6e28ca98a6cc8497ad822309de5153eb3
|
2015-08-14 10:24:56 -06:00 |
|
Gregory Nutt
|
a44a208ff6
|
SAMV71 MCAN: Change Kconfig so that zero is no longer the default value for the size of RXFIFO0, RXFIFO1, and TXFIFIQ. In fact, zero is not an illegal value
|
2015-08-13 08:13:49 -06:00 |
|
Gregory Nutt
|
bef5eb0bc9
|
Fix a typo in a preprocessor warning
|
2015-08-12 15:32:46 -06:00 |
|
Gregory Nutt
|
b9d4ead73f
|
SAMV7 MCAN: Correct usage of PCLK prescaler. From Frank Benkert
|
2015-08-12 11:17:03 -06:00 |
|
Gregory Nutt
|
53638b10dc
|
SAMV7 USBHS device: Modify how ATTACH is performed if the use host has already reset
|
2015-08-12 11:13:18 -06:00 |
|
Gregory Nutt
|
68932c02d3
|
Fix typos in SAMV7 MCAN. From Frank Benkert
|
2015-08-12 08:17:50 -06:00 |
|
Gregory Nutt
|
2264c1fa64
|
SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled
|
2015-08-11 15:48:26 -06:00 |
|
Gregory Nutt
|
f3d1c19965
|
SAMV7 SPI slave: Loop in the interrupt handler; RDRF and TXNE events should occur very closely in time
|
2015-08-11 09:30:24 -06:00 |
|
Gregory Nutt
|
c8c470271f
|
SAMV7 SPI Slave: Completes implementation basic, no-DMA driver
|
2015-08-10 10:05:00 -06:00 |
|
Gregory Nutt
|
c7b0a35e85
|
Rename sam_spi_slave_initialize to up_spi_slave_initialize for better symmety with the Master SPI interface definition
|
2015-08-09 17:41:55 -06:00 |
|
Gregory Nutt
|
ec68d00ed8
|
A few more cosmetic changes to the SAMV7 SPI slave driver-in-progress
|
2015-08-09 16:21:49 -06:00 |
|
Gregory Nutt
|
1fbd5351ff
|
Fix typo in a Kconfig file
|
2015-08-09 15:50:04 -06:00 |
|
Gregory Nutt
|
c7eaa00ed4
|
SAMV7 SPI slave: Add output queuing and interrupt handling
|
2015-08-09 15:42:32 -06:00 |
|
Gregory Nutt
|
5f4224115a
|
SAMV7 SPI Slave: Add a basic driver framework for SPI slave. Still a lot of missing logic
|
2015-08-09 12:04:43 -06:00 |
|
Gregory Nutt
|
7e7150899a
|
SAMV7: Add configuration options to select SPI slave (slave driver not yet committed)
|
2015-08-09 09:47:06 -06:00 |
|
Gregory Nutt
|
05aae51c89
|
SAMV7 MCAN: Lock the scheduler at one critical point to avoid a possible race condition
|
2015-08-09 08:41:57 -06:00 |
|
Gregory Nutt
|
7a6bdf286e
|
SAMV7 MCAN: Add some precautions to assue that a counting semaphore does not get out of synch
|
2015-08-08 08:38:52 -06:00 |
|
Gregory Nutt
|
a7a52252a8
|
SAMV7 MCAN: Fix DCACHE configuration dependency; Mkae sure DMA buffers are aligned to the cache line size at the end, Make RX FIFO1 the high priority FIFO and it it preference for RX input
|
2015-08-07 12:31:01 -06:00 |
|
Gregory Nutt
|
75ce247ed1
|
Use message sized defined in can.h
|
2015-08-07 09:01:30 -06:00 |
|
Gregory Nutt
|
aea94d9525
|
SAMV7 MCAN: Add support for all filter modes
|
2015-08-07 08:23:21 -06:00 |
|
Gregory Nutt
|
955202b895
|
Grr.. typos crept in during the last minute clean-up of the previous fix 8(
|
2015-08-06 12:50:11 -06:00 |
|
Gregory Nutt
|
32900bdb0b
|
SAMV71 MCAN: Fix standard ID mask
|
2015-08-06 12:47:14 -06:00 |
|
Gregory Nutt
|
f7bcff3d12
|
SAMV7 MCAN: Fix filter configuration when now filters are defined. We need to accept all messages in this case
|
2015-08-06 11:50:41 -06:00 |
|
Gregory Nutt
|
86f7a58954
|
SAMV7 MCAN: some fixes from early testing
|
2015-08-06 10:24:31 -06:00 |
|
Gregory Nutt
|
73a96ab078
|
Update some function headers
|
2015-08-05 16:22:10 -06:00 |
|
Gregory Nutt
|
983df071c3
|
STM32V7 MCAN: CAN FD mode depends on support from the upper half driver, so it is now global CAN configuration
|
2015-08-05 13:55:20 -06:00 |
|
Gregory Nutt
|
bb47c7f80e
|
SAMV7 MCAH: Add support for IOCTL commands that manage filters
|
2015-08-05 12:59:29 -06:00 |
|
Gregory Nutt
|
d824223736
|
SAMV7 MCAN: Fix uninialize configuration value
|
2015-08-05 09:16:16 -06:00 |
|
Gregory Nutt
|
4db9f276e6
|
SAMV7 MCAN: Fix some compilation errors when CAN debug is enabled
|
2015-08-05 08:21:32 -06:00 |
|
Gregory Nutt
|
92f5bf01c3
|
SAMV7 MCAN: Correct some compile errors when only MCAN1 is enabled
|
2015-08-05 08:07:25 -06:00 |
|
Gregory Nutt
|
1a93dadf26
|
SAMV7 MCAN: Fix some compilation warnings (some of which are real coding errors).
|
2015-08-05 07:29:20 -06:00 |
|
Gregory Nutt
|
c30cfe2025
|
SAMV7 MCAN driver is code complete (with some missing functionality)
|
2015-08-05 07:09:29 -06:00 |
|
Gregory Nutt
|
c8923bb6fc
|
SAMV7 MCAN: Finish some TX FIFO status methods; Correct interpretation of DLC in CAN_FD mode
|
2015-08-04 17:19:47 -06:00 |
|
Gregory Nutt
|
a64398c86b
|
SAMV7 MCAN: Minor correcting to message size calculation
|
2015-08-04 14:05:07 -06:00 |
|