sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,672 Commits 1 Branch 0 Tags 291 MiB
a36dc5d143
Commit Graph

3647 Commits

Author SHA1 Message Date
Gregory Nutt
59412f25ce SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov. 2015-02-25 08:12:31 -06:00
Gregory Nutt
70c8ff6581 Eliminate some warnings 2015-02-25 08:05:35 -06:00
sauttefk
a6695b442e Fix SSI TX and RX legacy mapping of TM4C1294NC 2015-02-24 03:31:12 +01:00
Gregory Nutt
0dc70108b8 STM32: Fix for compilation introduced by last backup RAM change. Not sure it it is correct, be now things do compile 2015-02-21 17:51:03 -06:00
Gregory Nutt
63711ad338 Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane. 2015-02-21 15:15:51 -06:00
Gregory Nutt
7d43cf2087 Changes to support fully write protecting the backup domain. N.B. stm32_pwr_enablebkp did not account for the delay from enable to the domain being writable. The KISS solution is a up_udelay. A more complex solution would be a negated write test with restore. From David Sidrane. 2015-02-21 14:53:33 -06:00
Gregory Nutt
2d91128111 Tiva GPIO clean-up by Calvin Maguranis 2015-02-20 13:40:25 -06:00
Gregory Nutt
a0a553f3e9 Tiva: Move GPIIO prototypes out of arch/arm/include/tiva/irq.h to arch/arm/tiva/tiva_gpio.h where they belong 2015-02-20 13:31:43 -06:00
Gregory Nutt
ac0cd3655a Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00
Gregory Nutt
2532e33de2 VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled. 2015-02-18 09:34:58 -06:00
Gregory Nutt
d3196ca5c3 The RTC ioctl() method is now a configuration option 2015-02-18 08:23:10 -06:00
Gregory Nutt
57eb72a13f Add an IOCTL method to the RTC interface 2015-02-18 08:05:31 -06:00
Gregory Nutt
80cb25a0ff Tiva ADC: Should not have its own ADC debug. Should use the common Analog debug 2015-02-17 14:54:56 -06:00
Gregory Nutt
7354e41aa6 Tiva: Updated files to allow for ADC triggering by the timer. I’ve cleaned up some parts of the ADC code, too, and fleshed out the PWM triggering ioctl. From Calvin Maguranis 2015-02-17 13:50:30 -06:00
Gregory Nutt
d578829ddd Tiva SPI: Cosmetic improvements 2015-02-17 12:45:47 -06:00
Gregory Nutt
56b29b00ea EFM32 USB Device: Is not basically functional with this change. From Pierre-noel Bouteville. 2015-02-16 15:45:49 -06:00
Gregory Nutt
ff6b34967b Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
Gregory Nutt
0081b0840b Missed a Kconfig definition in the last commit 2015-02-16 10:41:12 -06:00
Gregory Nutt
c747521953 STM32 RTC: Extend the RTC interface to support reading subseconds. From Jussi Kivilinna 2015-02-16 07:18:09 -06:00
Gregory Nutt
529bc9626c Add support for RTC driver to the STM32F4-Discovery board 2015-02-15 10:11:01 -06:00
Gregory Nutt
68d39b69aa Remove an unused variable 2015-02-15 08:51:39 -06:00
Gregory Nutt
726b0d5f58 RTC: A little more clean-up of the RTC driver 2015-02-15 08:19:23 -06:00
Gregory Nutt
53322a50f4 STM32 RTC: Implement the rdtime() method of the RTC lower half interface 2015-02-13 13:56:22 -06:00
Gregory Nutt
702f155fd0 STM32 RTC driver lower half: Implement the settime method of the RTC interface 2015-02-13 13:36:15 -06:00
Gregory Nutt
b0b6747d49 Break out a new internal interface, stm32_rtc_setdatetime(). This eliminates some un-necessary time conversions. From Freddie Chopin. 
Add a skeleton implementation of the RTC lower half interface at arch/arm/src/stm32/stm32_rtc_lowerhalf.c.  This is just the framework for the RTC lower half.  None of the interface methods have yet been implemetned.
 2015-02-13 12:56:58 -06:00
Gregory Nutt
c662563b83 Forgot to add a file in the last commit 2015-02-13 10:05:10 -06:00
Gregory Nutt
501bc15fbd RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
d1fa95ffc3 Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6' 2015-02-11 18:07:03 -06:00
sauttefk
7384d3bd79 Add TI EK-TM4C1294XL launchpad support 2015-02-12 00:30:38 +01:00
Gregory Nutt
24e51794f9 Kinetis: Add architectural support for the K26Z128VLH4. From Derek B. Noonburg 2015-02-11 07:15:45 -06:00
Gregory Nutt
28c2d93212 LP17 Ethernet Driver: Fix some compile problems when IPv6 is enabled 2015-02-10 15:23:11 -06:00
Gregory Nutt
5566a458d1 LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug. 2015-02-10 14:04:08 -06:00
Gregory Nutt
9e6cd16a8b SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
8b0d9fb456 Fix some warning 2015-02-09 18:24:31 -06:00
Gregory Nutt
0a6ae631dc Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers. 2015-02-09 17:16:55 -06:00
Gregory Nutt
f0d318c124 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
08677542dc SAMA5D Ethernet: Add support for CONFIG_NET_NOTINTS so that the driver can operate from the work queue thread instead of doing everything from the interrupt level. 2015-02-09 15:26:05 -06:00
Gregory Nutt
25f187d754 ARMv7-A interrupt handler: Should not automatically re-enable interrupts on interrupt return. That interferes with the driver's ability to manage interrupts. 2015-02-09 15:24:31 -06:00
Gregory Nutt
fa580e17cf Oops... Conditioned on IPv4 wheren IPv6 was intended 2015-02-09 14:16:32 -06:00
Gregory Nutt
987715e8a3 Fix IPv4-dependend debug output 2015-02-09 13:18:31 -06:00
Gregory Nutt
09b356c497 SAMA5D4 EMAC: Add support for Multicast address matching and IPv6 2015-02-09 10:50:38 -06:00
Gregory Nutt
67f0563fad Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread. 2015-02-09 08:33:29 -06:00
Gregory Nutt
8bac6b71ce SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
b2ed249b42 STM32 SPI: Clean-up asymmetric configuration of SPI6 2015-02-07 18:59:06 -06:00
Gregory Nutt
706f01b8a2 STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane. 2015-02-07 13:59:45 -06:00
Gregory Nutt
9318121175 Updated Tiva ADC files 2015-02-06 16:56:12 -06:00
Gregory Nutt
3ca8d3766a Tiva ADC: Add Kconfig options for ADC. From Calvin Maguranis 2015-02-05 19:05:13 -06:00
Gregory Nutt
225489a99a Tiva ADC: Partial build support. Still missing Kconfg changes 2015-02-05 18:01:18 -06:00
Gregory Nutt
376f39c822 Tiva ADC: Adds a Tiva ADC driver. From Calvin Maguranis 2015-02-05 17:36:23 -06:00
Gregory Nutt
a6bda5f8ba Tiva ADC: Register definitiona header file from Calvin Maguranis 2015-02-05 16:29:17 -06:00
Gregory Nutt
46a153aa3e Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis 2015-02-05 13:51:32 -06:00
Gregory Nutt
ee8d792737 Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled 2015-02-05 11:47:56 -06:00
Gregory Nutt
821ffc0b8a STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
de75731989 Add IPv6 support to network driver skeleton and to SAMA5D4 Ethernet driver (which, unfortunately is still missing address filtering logi) 2015-02-05 10:49:32 -06:00
Gregory Nutt
506c6c8512 ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages. 2015-02-05 09:43:29 -06:00
Gregory Nutt
1646e643d7 Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
Gregory Nutt
f036df9faa Minor update to Kconfig file selections 2015-02-04 08:21:32 -06:00
Gregory Nutt
011c6e0c7e Re-arrange condition logic from the last change to avoid having STM32-specific conditional logic outside of the STM32 sandbox. 2015-02-04 07:24:19 -06:00
Gregory Nutt
2393a074e5 STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> 2015-02-04 06:49:05 -06:00
Gregory Nutt
d617384d27 EFM: Remove a misbehaving assertion. From Pierre-noel Bouteville 
Also remove spaces before and after paretheses to conform to coding standard.
 2015-02-03 13:34:37 -06:00
Gregory Nutt
d08e29e0a0 Remove and extra endif from the Kconfig 2015-02-03 12:46:40 -06:00
Gregory Nutt
5189cddef2 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
f017f4c8a8 SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
Gregory Nutt
d8561fbcae Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
Gregory Nutt
515856c3d9 EFM32 Add support of BURTC and add possibility of debug message of RMU: Pierre-noel Bouteville 2015-02-01 06:19:53 -06:00
Gregory Nutt
0817d47964 Fix a missing quotation mark in configuration description 2015-01-30 12:28:04 -06:00
Gregory Nutt
6b900ec05c EFM32: Logic to unconditionally enable LE clocking. Even you don't use core clock LE as source for LFA or LFB, to read are write any register not clocked by HFPERCLK or HFCORECLK, HFCORECLKLE should be enabled. From Pierre-noel Bouteville. 2015-01-30 07:44:49 -06:00
Gregory Nutt
56200909a0 ARM assembly language memcpy.S was not returning a value in R0 it is required to do. From David Sidrane 2015-01-29 06:36:53 -06:00
Gregory Nutt
ce80d90e6d Tiva Ethernet: Move place where interrupts are disabled. It is probably not possible, but the logic looks like it could leave interrupts disabled 2015-01-27 14:59:31 -06:00
Gregory Nutt
523b12c624 Recent changes to stm32_rtcc.c do not compile with STM32L15XX configurations. From Jussi Kivilinna. 2015-01-27 09:20:42 -06:00
Gregory Nutt
2ce16c8fda Disabling any of EXTI 5-9 interrupts was disabling interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi Kivilinna. 2015-01-27 09:15:43 -06:00
Gregory Nutt
d78464404a Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth 2015-01-26 07:33:22 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
e8f266001d Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
16f72b3470 Add support for the EFM32 reset management unit (RMU). From Pierre-noel Bouteville 2015-01-23 15:25:10 -06:00
Gregory Nutt
639fe6c297 Armv7-M: Remove Px4-only setting of stack to 0xff. This is incompatible with standard NuttX stack montitoring logic 2015-01-22 10:09:10 -06:00
Gregory Nutt
b3db229b77 STM32 Ethernet: Port IPv6 address filtering from the Tiva TM4C driver 2015-01-21 15:04:39 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
19a71b395c TM4C Ethernet: Fix the ICMPv6 multicast address 2015-01-19 14:56:43 -06:00
Gregory Nutt
674a86027a Tiva Ethernet: Add support for receiving IPv6 multicast frames 2015-01-19 12:43:13 -06:00
Gregory Nutt
3aafa0b93d nuttx/arch/arm/src/stm32/stm32_serial.c: fix declaration and definition of up_receive() and up_dma_receive() to match fields of uart_ops_s from nuttx/include/nuttx/serial/serial.h 2015-01-19 06:42:27 -06:00
Gregory Nutt
0d8ef0993f Tiva Ethernet: When calling into the stack from the worker thread, it is necessary to have the stack locked 2015-01-18 16:58:11 -06:00
Gregory Nutt
f14538bf52 Tiva Ethernet: Don't try to print IPv4 address if IPv4 is not enabled 2015-01-18 11:38:40 -06:00
Gregory Nutt
41b1f5d9cf Tiva Ethernet: Back out previous change... it is WRONG 2015-01-17 11:55:20 -06:00
Gregory Nutt
30183a73be Tive Ethernet: Fix some race conditions in the driver that become apparent when debug is enabled 2015-01-17 10:59:45 -06:00
Gregory Nutt
f5824701b7 Tiva Ethernet: Costmetic changes to comments and debug strings 2015-01-17 10:27:57 -06:00
Gregory Nutt
f0c112b3b0 Tiva Ethernet: Remove assertion. Just log and error and continue 2015-01-17 10:01:55 -06:00
Gregory Nutt
2236a996e5 TM4C Ethernet: Add some assertions 2015-01-16 15:25:18 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
d3174cdac4 Update README 2015-01-14 09:10:26 -06:00
Gregory Nutt
11eec5f5d8 Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts. 
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer).  Also, do not unconditional enable the timer out interrupt.  The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
 2015-01-14 07:33:59 -06:00
Gregory Nutt
db59dd2208 Tiva Timer: Remove a big chunk of unnecessary logic 2015-01-13 17:08:37 -06:00
Gregory Nutt
fe4e3f4529 Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt 2015-01-13 15:55:54 -06:00
Gregory Nutt
08638e10bd Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress. 2015-01-13 11:49:00 -06:00
Gregory Nutt
5aab327457 DK-TM3C129X Timer: Add timer initialization logic to the board bring-up 2015-01-13 11:10:35 -06:00
Gregory Nutt
0aa32a003c Tiva Timer: Rename tiva_timerlow.c to tiva_timerlow32.c since it only supports 32-bit periodic timers 2015-01-13 10:10:02 -06:00
Gregory Nutt
ffa34aa5db Tiva Timer: Completes implementation of the timer driver lower half 2015-01-13 10:06:40 -06:00
Gregory Nutt
1bd74b4dcc Tiva Timer: Allow timeout interrupts even if the reload value is zero. That is the value that is need to get an interrupt on the wrap from 0xffffffff to 0x00000000 2015-01-13 08:29:25 -06:00
Gregory Nutt
cfc0732c57 Tiva Timer: Add conditional compilation to enable/disable each timer feature. Not only does this reduce the footprint by suppressing unused features, it also protects from partially implemented features that are now conditioned on EXPERIMENTAL 2015-01-13 07:49:20 -06:00
Gregory Nutt
73e6fc8142 Tiva Timer: Rename tiva_timer.c to tiva_timerlib.c 2015-01-12 15:55:41 -06:00
Gregory Nutt
f93e69e94e Tiva Timer: First cut at timer driver lower half (still incomplete) 2015-01-12 15:52:48 -06:00
Gregory Nutt
4510be6c7d Tiva Interrupts: Changes corresponding to the last needed in the Tiva Kconfig file as well 2015-01-12 10:14:48 -06:00
Gregory Nutt
9e546ff37a Tiva interrupts: Fix chip-specific interrupt un-definitions 2015-01-12 10:00:42 -06:00
Gregory Nutt
90da8aa71d Tiva Timers: Add interfaces to read the current timer value 2015-01-12 10:00:41 -06:00
Gregory Nutt
e5a0dcd0f9 USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts 2015-01-11 08:05:09 -06:00
Gregory Nutt
b75c43f6ef Tiva Timer: Fix a typo 2015-01-10 12:42:39 -06:00
Gregory Nutt
3c06976ba7 Tiva Timer: Implements configuration of the 32-bit RTC timer 2015-01-10 12:41:15 -06:00
Gregory Nutt
c0e1dc3b8a Tiva Timer: Add support for RTC match interrupts 2015-01-10 12:22:37 -06:00
Gregory Nutt
a2a5c47d9d Tive Timer: Add support for ADC trigger generation from one-shot and periodic timers for timeout and match evetns 2015-01-10 10:07:56 -06:00
Gregory Nutt
2eeca96330 Tiva Timer: Add support to set the match regiser(s) relative to the timer counter (and prescale) registers. Enable match interrupts. These are one time interruprts: After the match interrupt is dispatched, further match interrupts are disabled 2015-01-10 08:34:39 -06:00
Gregory Nutt
2871677362 Tiva Timer: Add support for input clock prescaler in 16-bit one-shot/periodic modes 2015-01-09 16:49:00 -06:00
Gregory Nutt
df48abcc47 Tiva Timer: Add logic to acknowledge Tiva Timer interrupts 2015-01-09 15:01:49 -06:00
Gregory Nutt
9ae597c441 Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module 2015-01-09 14:10:31 -06:00
Gregory Nutt
7384857658 Tiva Timer: Add more interrupt management logic 2015-01-09 13:29:03 -06:00
Gregory Nutt
626d6cdab4 Tiva Timer: Add functions to set match registers; Add logic to select count direction 2015-01-09 12:05:26 -06:00
Gregory Nutt
8552b2f679 Tiva Timer: Add interfaces to start/stop timers and to set the interval load registers. 2015-01-09 11:07:52 -06:00
Gregory Nutt
d5d3a23ac3 Tiva Timers: Add framework to support tmer interrupts 2015-01-09 10:21:59 -06:00
Gregory Nutt
1193b4aa55 STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE 2015-01-08 17:47:34 -06:00
Gregory Nutt
09bd382697 Tiva Timer: Partial support for 16- and 32-bit, oneshot and periodic timer configurations 2015-01-08 13:44:10 -06:00
Gregory Nutt
58818e1afd Tiva Timer: Add support to select alternate clock source and 32-bit register concatenation mode. 2015-01-08 11:08:54 -06:00
Gregory Nutt
d3bc0b7223 Tiva Timer: Add register level debug support 2015-01-08 10:14:38 -06:00
Gregory Nutt
6c612cf967 Tiva Timer: Add basic framework to configure timers. Incomplete on initial commit 2015-01-08 09:47:38 -06:00
Gregory Nutt
92dc58c376 Tiva Timer: SYNC regiser is only available on GPTM0 2015-01-08 08:07:31 -06:00
Gregory Nutt
e55df605a8 Tiva Timer: Update timer register bit definitions for the LM4F 2015-01-08 08:03:47 -06:00
Gregory Nutt
1ed2956ad5 Tiva Timer: Extend timer register definitions to handle other chips 2015-01-08 07:56:00 -06:00
Gregory Nutt
1ace391fcf MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. 
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
 2015-01-08 06:23:42 -06:00
Gregory Nutt
5c68f0dd34 Tiva Timer: Missed one register bit field definition 2015-01-07 12:03:08 -06:00
Gregory Nutt
9eb693845e TM4C129X Timer: Completes timer register definition header file 2015-01-07 11:43:56 -06:00
Gregory Nutt
81afc06f54 TM4C129X Timer: Add some missing addresses and some of the register bit definitions. Still incomplete 2015-01-07 10:07:47 -06:00
Gregory Nutt
28a52cbd23 TM4C129X Timer: Update addresses in the timer register definitions file. Still missing bit field definitions 2015-01-07 08:57:48 -06:00
Gregory Nutt
0748291ce9 Tiva IRQs: Fix IRQ control logic; was limited to only 64 IRQs. That is a problem for higher numbered IRQs on many platforms 2015-01-06 10:49:47 -06:00
Gregory Nutt
c429a4d93f Tiva I2C: For TM4C, high speed mode is now configurable (but disabled as EXPERIMENTAL) 2015-01-06 10:48:08 -06:00
Gregory Nutt
10b349bd1a Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt 2015-01-05 15:12:45 -06:00
Gregory Nutt
52c4334429 Tiva: Fixes to support building Tiva TM4C129X I2C driver 2015-01-05 13:15:40 -06:00
Gregory Nutt
67aeab7105 Tiva: Update I2C register definitions to include support for the TM4C129X 2015-01-05 13:08:07 -06:00
Gregory Nutt
c4f64c72c8 Tiva Ethernet: Add support for PHY interrupts 2015-01-03 13:16:26 -06:00
Gregory Nutt
40113f0b93 Tiva Ethernet: Configure external PHY interrupt pin 2015-01-03 10:59:12 -06:00
Gregory Nutt
a7e0acbc6f Tiva Ethernet: Removed logic that holds the PHY and re-ordered some reset logic. Can not ping the DK 2015-01-03 09:28:54 -06:00
Gregory Nutt
15f0a046fd Tive Ethernet: Wait for EMAC to come out of reset before accessing any registers 2015-01-03 06:52:19 -06:00
Gregory Nutt
6bb12a34dc Tiva serial: Add volatile to fix a wait loop that was not waiting; CR really should preced LF in CR-LF expansion 2015-01-02 14:05:42 -06:00
Gregory Nutt
28d44e1b30 Cosmetic changes 2015-01-02 13:59:47 -06:00
Gregory Nutt
b828741900 Tiva: Fix typos in conditional compilation 2015-01-02 13:59:30 -06:00
Gregory Nutt
91a92fc538 Tiva Ethernet: Add lots of debug output for testing 2015-01-02 13:10:25 -06:00
Gregory Nutt
ce3dac34b2 Tiva: If peripheral ready register not available, then lets say the peripheral is ready 2015-01-02 12:58:20 -06:00
Gregory Nutt
194e5a9600 Tiva: Wait for the console UART to be ready before configuring it 2015-01-02 12:57:41 -06:00