Lok Tep
1f8c0fdcdb
timer base name difference
2015-11-09 14:34:59 +01:00
Lok Tep
7d386866af
Merged nuttx/arch into master
2015-11-09 14:24:41 +01:00
Gregory Nutt
612ebdeabd
Kconfig: Set default number of MPU regions to 16 for Cortex-M7
2015-11-08 06:59:35 -06:00
Gregory Nutt
352d2a1d02
SAMV7 XDMAC: Don't sample interrupt status registers in debug mode. This can cause loss of interrupts
2015-11-07 11:25:20 -06:00
Gregory Nutt
dd69967934
SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized
2015-11-07 09:35:23 -06:00
Gregory Nutt
2e99311fb4
SAMV7 QSPI: DMA transfer width should be 32- not 16-bits
2015-11-07 09:34:40 -06:00
Gregory Nutt
7b3c0ac7bc
ARMv7-M: Cosmetic fixes to some file headers
2015-11-06 13:37:37 -06:00
Gregory Nutt
b4b0dde792
SAMV7 QSPI: Back out some kludges that are no longer necessary
2015-11-06 13:02:45 -06:00
Gregory Nutt
17c8cbceaf
SAMV7 QSPI: Rounding up buffer length for memcpy style transfer is un-necessary
2015-11-06 12:59:40 -06:00
Gregory Nutt
553ba1a682
SAMV7 QSPI: When QSPI is enabled, make the QSPI memory strongly ordered
2015-11-06 12:10:15 -06:00
Gregory Nutt
771095e25f
ARMv7-M: Add MPU support for strongly couple memory regions
2015-11-06 11:50:57 -06:00
Gregory Nutt
1c79e77811
ARMv7-M: Minor naming change to improve readability
2015-11-06 11:24:52 -06:00
Gregory Nutt
4371b756df
SAMV7: Add MPU and protected build support
2015-11-06 11:12:28 -06:00
Gregory Nutt
dff502d99b
SAMV7 QSPI: Costmetic changes
2015-11-05 15:03:53 -06:00
Gregory Nutt
e866cdd6f1
Fix missed closing comment in last commit
2015-11-05 10:43:49 -06:00
Gregory Nutt
68ae17a8a7
SAMV7 QSPI: Various kludges added during debug of QSPI. I am not if any of these are really correct
2015-11-05 10:32:13 -06:00
Gregory Nutt
f49e862db5
Merged in paulpatience/nuttx-arch/stm32_adc (pull request #29 )
...
STM32 ADC: Add support for STM32F30xxx
2015-11-05 09:28:34 -06:00
Paul A. Patience
7d793bb99b
STM32 ADC: Add support for STM32F30xxx
2015-11-05 10:13:58 -05:00
Frank Benkert
9cbbfe7e59
SAMV7 MCAN: Fix receipt of RTR requests. From Frank Benkert
2015-11-04 08:03:27 -06:00
Gregory Nutt
1299160d1d
SAMV71-XULT: Add call to can_txready() to MCAN driver. This is part of a fix to a CAN hang problem
2015-11-03 10:47:37 -06:00
Lok Tep
24f1155d76
compile fixes
2015-11-02 23:34:32 +01:00
pnb
059fc85201
merge upstream
2015-11-02 21:47:13 +01:00
Gregory Nutt
c90876ff9c
SAMV7: Add configuration support (only) for use of USART as SPI
2015-11-02 13:58:19 -06:00
Lok Tep
30cea64430
fixes
2015-11-02 17:41:03 +01:00
Gregory Nutt
f6d7da24a7
SAM4CM should advertise that it supports Tickless operation in Kconfig
2015-11-02 06:39:24 -06:00
Gregory Nutt
96cee3709a
Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #28 )
2015-11-01 16:51:32 -06:00
Lok Tep
08224b8606
after debug
2015-11-01 23:11:37 +01:00
Paul A. Patience
4c2c989838
STM32 PWM: Add support for multiple output channels
2015-11-01 17:11:35 -05:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
Gregory Nutt
4131081e72
Merged in pnb990/nuttx-kernel-arch/upstream_master (pull request #27 )
...
pwm duty can by zero
2015-11-01 07:52:57 -06:00
pnb
d1b4d55343
pwm duty can by zero
2015-11-01 14:45:12 +01:00
pnb
f3c0e5db5e
pwm duty can by zero
2015-11-01 14:40:43 +01:00
Gregory Nutt
d6d834be5b
Merged in pnb990/nuttx-kernel-arch/upstream_master (pull request #25 )
...
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 09:07:28 -06:00
Gregory Nutt
4bef3db150
Merged in v01d/arch/lpc4337 (pull request #24 )
...
lpc4337 support: WIP
2015-10-31 09:06:18 -06:00
pnb
0090cfe6d4
Change name of HAVE_TIMx_PWM_OUTPUT into HAVE_TIMx_GPIOCONFIG
2015-10-31 16:00:24 +01:00
pnb
fa278723d5
Change name of HAVE_TIMx_PWM_OUTPUT into HAVE_TIMx_GPIOCONFIG
2015-10-31 15:59:20 +01:00
pnb
668c56b1a6
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 15:42:00 +01:00
pnb
12c835c2f2
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 15:33:32 +01:00
v01d
79fad2843a
lpc4337: WIP
2015-10-30 20:15:18 -03:00
Lok Tep
3a4b0e12a1
tickless
2015-10-30 17:37:40 +01:00
Gregory Nutt
22ea50464f
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_qencoder (pull request #23 )
...
Enhance STM32 QEncoder driver with configurable input filters
2015-10-22 18:28:22 +08:00
Gregory Nutt
e3d44ace60
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429_pinmap (pull request #22 )
...
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
2015-10-22 18:26:53 +08:00
Gregory Nutt
04705d14df
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f373_exti (pull request #21 )
...
Add EXTI definitions for STM32F373
2015-10-22 18:21:45 +08:00
Gregory Nutt
2b078150e8
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429n (pull request #20 )
...
Add support for STM32F429N (TFBGA) chip
2015-10-22 18:19:52 +08:00
Gregory Nutt
c87c50df14
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_PLLSAI (pull request #19 )
...
Fix setup of PLLSAI in STM32F4xx.
2015-10-22 18:17:21 +08:00
Lok Tep
b91fbed6a6
address 7->8
2015-10-21 17:35:52 +02:00
Marten Svanfeldt
3299a31b27
Enhance STM32 QEncoder driver with configurable input filters
...
Current driver applies a fixed filter of f_sample=f_dts/4, N=6. This can
potentially be insufficient in noisy environments, or too slow for really
fast encoder sources, so let the user set it from the Kconfig file
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 11:06:01 +08:00
Marten Svanfeldt
fdb484f24e
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:56:36 +08:00
