Gregory Nutt
|
065f2d6057
|
SAMV7 USBHS DCD: Add logic to detect high speed mode; use DEBUGASSERT to check input parameters
|
2015-08-22 08:58:38 -06:00 |
|
David Sidrane
|
6559c8994a
|
Remove the word NOT - that was used to test the fix.
|
2015-08-21 18:51:28 -06:00 |
|
David Sidrane
|
390c777a2a
|
Removed the word NOT - that was used to test the fix.
|
2015-08-21 18:40:20 -06:00 |
|
Pavel Pisa
|
2fafe1c817
|
arch/arm/src/lpc17: Actually implement options to use external SDRAM and or SRAM for the heap. From Pavel Pisa
|
2015-08-21 18:28:59 -06:00 |
|
Gregory Nutt
|
4c0d36740d
|
Some of the last review chnages were still in the editor
|
2015-08-21 18:25:10 -06:00 |
|
Gregory Nutt
|
9a32e907df
|
Trivial, cosmetic changes from review of merge
|
2015-08-21 18:22:57 -06:00 |
|
Gregory Nutt
|
4e347080e6
|
Update comments in Kconfig file
|
2015-08-21 18:15:09 -06:00 |
|
Gregory Nutt
|
16c5be9767
|
Merged in david_s5/arch/upstream_446 (pull request #7)
Upstream_446
|
2015-08-21 18:11:05 -06:00 |
|
David Sidrane
|
9d64050d68
|
Added Changes to support for the new USB OTG controller for F446 register map
|
2015-08-21 13:57:08 -10:00 |
|
David Sidrane
|
7c96342c63
|
Break the stm32_otg.h into an stm32fxxxxx and stm32f44xx (should work on F7) versions
|
2015-08-21 13:55:06 -10:00 |
|
David Sidrane
|
5d1ff3f7e1
|
Use read modify write on PLL and CFG registers
|
2015-08-21 13:22:09 -10:00 |
|
David Sidrane
|
1c746edceb
|
Added PLL P constants
|
2015-08-21 13:20:16 -10:00 |
|
Gregory Nutt
|
972f67ce42
|
SAMV7 QSPI: Add framework for a QSPI driver. Initial commit is just the SPI driver with some name changes
|
2015-08-21 14:22:47 -06:00 |
|
Gregory Nutt
|
f6c6723d88
|
SAMV7 USBHS Device: After aligning DMA buffers and disabling write-back data cache, the DCD driver is fully functional using the CDC/ACM device
|
2015-08-21 12:30:29 -06:00 |
|
Gregory Nutt
|
da6c5aabdf
|
All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa
|
2015-08-21 08:42:24 -06:00 |
|
Gregory Nutt
|
0b3b104b74
|
Remove unnecessary step in previous commit
|
2015-08-20 16:21:45 -06:00 |
|
Pavel Pisa
|
387f76d455
|
This fix allows to run NuttX from SRAM or to place it after bootloader when run from Flash. From Pavel Pisa
|
2015-08-20 07:46:18 -06:00 |
|
Gregory Nutt
|
5196a4183c
|
SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address
|
2015-08-19 11:36:38 -06:00 |
|
Gregory Nutt
|
0db7ac92d9
|
Minor coding style fixes in last commit; remove some unneeded debug output
|
2015-08-19 07:54:46 -06:00 |
|
SaeHie Park
|
75626fb071
|
STM32: Fix eth mem leak in recvframe
|
2015-08-19 15:40:04 +09:00 |
|
Gregory Nutt
|
cfd4f943da
|
SAMV7 MCAN: When bitrate is changed, the MCAN has to be reset and there are lots of issues related to getting back to a healthy state if there is multithreaded access to the MCAN device. This commit handles a few of those issues, but there are more
|
2015-08-18 11:56:07 -06:00 |
|
Gregory Nutt
|
4b96605f93
|
SAMV7 MAN: Add support for bit timing IOCTL commands
|
2015-08-18 11:20:22 -06:00 |
|
Gregory Nutt
|
ff84e67e59
|
SAMV7 MCAN: Add logic to report CAN errors
|
2015-08-18 08:48:13 -06:00 |
|
Gregory Nutt
|
b7d6720a23
|
All CAN drivers: Set the new error indication to zero in the CAN message report
|
2015-08-18 07:24:12 -06:00 |
|
Gregory Nutt
|
c01d3298e5
|
Merged in paulpatience/nuttx-arch (pull request #5)
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, STM32F303RD, and STM32F303RE devices.
|
2015-08-17 12:55:32 -06:00 |
|
Paul A. Patience
|
c800841632
|
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6,
STM32F303C8, STM32F303RD, and STM32F303RE devices.
|
2015-08-17 14:00:49 -04:00 |
|
Gregory Nutt
|
531456d20c
|
Fix deadlock when closing the MCAN device driver
|
2015-08-17 11:49:20 -06:00 |
|
Gregory Nutt
|
4f122d5290
|
SAMV71 MCAN: Default clock source should be MCK, not MAIN
|
2015-08-17 11:03:15 -06:00 |
|
Gregory Nutt
|
ff38abf580
|
SAMV7 MCAN: Should support standard CAN IDs in extended ID mode
|
2015-08-17 10:52:58 -06:00 |
|
Gregory Nutt
|
ba6c0b3fa3
|
Fix more common typos
|
2015-08-16 11:06:29 -06:00 |
|
Gregory Nutt
|
e29220183a
|
Fix some common typos
|
2015-08-16 10:59:10 -06:00 |
|
Gregory Nutt
|
9e5e91c204
|
SAMV7 USBHS device: Fix backward test of TXINIT. Driver now appears to be functional
|
2015-08-16 08:55:44 -06:00 |
|
Gregory Nutt
|
b503bf6ca1
|
SAMV7 USB device: Fix base address of USBHS RAM; remove a bad assertion; fix clearing of endpoint interrupts
|
2015-08-15 13:00:32 -06:00 |
|
Gregory Nutt
|
9d7301f474
|
SAMV7 USBHS device: Need to enable endpoint before configuring it; Check for USB suspended backward
|
2015-08-15 10:41:15 -06:00 |
|
Gregory Nutt
|
651317ee49
|
SAML21: Various SERCOM fixes
|
2015-08-14 18:11:02 -06:00 |
|
Gregory Nutt
|
348060f5d2
|
SAMV7: Add QSPI Register Definition Header File
|
2015-08-14 18:11:01 -06:00 |
|
Gregory Nutt
|
150f79a198
|
Backout commit e03b47b6e28ca98a6cc8497ad822309de5153eb3
|
2015-08-14 10:24:56 -06:00 |
|
Gregory Nutt
|
a44a208ff6
|
SAMV71 MCAN: Change Kconfig so that zero is no longer the default value for the size of RXFIFO0, RXFIFO1, and TXFIFIQ. In fact, zero is not an illegal value
|
2015-08-13 08:13:49 -06:00 |
|
Gregory Nutt
|
bef5eb0bc9
|
Fix a typo in a preprocessor warning
|
2015-08-12 15:32:46 -06:00 |
|
Gregory Nutt
|
b9d4ead73f
|
SAMV7 MCAN: Correct usage of PCLK prescaler. From Frank Benkert
|
2015-08-12 11:17:03 -06:00 |
|
Gregory Nutt
|
53638b10dc
|
SAMV7 USBHS device: Modify how ATTACH is performed if the use host has already reset
|
2015-08-12 11:13:18 -06:00 |
|
Gregory Nutt
|
68932c02d3
|
Fix typos in SAMV7 MCAN. From Frank Benkert
|
2015-08-12 08:17:50 -06:00 |
|
Gregory Nutt
|
2264c1fa64
|
SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled
|
2015-08-11 15:48:26 -06:00 |
|
Gregory Nutt
|
f3d1c19965
|
SAMV7 SPI slave: Loop in the interrupt handler; RDRF and TXNE events should occur very closely in time
|
2015-08-11 09:30:24 -06:00 |
|
Gregory Nutt
|
27733a6731
|
Trivial spacing change
|
2015-08-11 07:51:31 -06:00 |
|
Gregory Nutt
|
9f4e033f4c
|
MoxART: Trivial changes from code review
|
2015-08-10 11:05:09 -06:00 |
|
Gregory Nutt
|
8de9d3f014
|
Merged in rnouse/nuttx-arch (pull request #4)
Add Shared IRQ support for UART w/multi port.
|
2015-08-10 10:11:43 -06:00 |
|
Gregory Nutt
|
c8c470271f
|
SAMV7 SPI Slave: Completes implementation basic, no-DMA driver
|
2015-08-10 10:05:00 -06:00 |
|
Anton D. Kachalov
|
f10b7ff09a
|
Merge branch 'master' of https://bitbucket.org/nuttx/arch
|
2015-08-10 18:14:49 +03:00 |
|
Anton D. Kachalov
|
46444388fa
|
Add Shared IRQ support for UART w/multi port.
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
|
2015-08-10 18:13:35 +03:00 |
|