Commit Graph

13669 Commits

Author SHA1 Message Date
Gintaras Drukteinis
1fbf788555 arch/arm/src/lpc43xx: Adapt LPC176x RTC driver for the LPC43xx. 2017-12-14 07:03:46 -06:00
Gregory Nutt
43a88c1428 arch/arm/src/lpc54xx: Fix some LCD clocking. This eliminates the hang problem. That is now recognizable albeit corrupted data on the display. 2017-12-13 19:07:10 -06:00
Gregory Nutt
d93a2d4f39 arch/arm/src/lpc54xx: Add reset logic. Some changes while debugging LDC. Does not yet work (hangs). 2017-12-13 14:36:58 -06:00
Gregory Nutt
f215660296 configs/lpcxpresso-lpc54628: Add the fb configuration testing the LCD. arch/arm/src/lpc54xx: Various fixes needed to get the fb configuration to build errorfree. The configuration is not functional as of this writing. 2017-12-13 09:18:16 -06:00
Gregory Nutt
48879933a9 arch/arm/src/lpc54xx: Correct some confusion about how the LCD data pins are configured. 2017-12-12 14:10:40 -06:00
Gregory Nutt
b33d7eb59f arch/arm/src/lpc54xx: Add the ported LPC1788 LCD driver to use the LPC54xx pin definitions and SYSCON. 2017-12-12 12:53:33 -06:00
Gregory Nutt
88834b6e50 arch/arm/src/lpc54xx: Add configuartion support and logic it all none, some, or all of the external RAM to the system heap. 2017-12-12 11:33:18 -06:00
Gregory Nutt
63415f9fb1 arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method. 2017-12-12 10:13:21 -06:00
Gregory Nutt
0cd87be495 arch/arm/src/lpc54xx: Correct the EMC divider register definition and one typo in the SDRAM setup. SDRAM is not fully functional on this board! 2017-12-12 08:24:57 -06:00
Gregory Nutt
d51554c101 arch/arm/src/lpc54xx: Costmetic. 2017-12-11 15:04:51 -06:00
Gregory Nutt
d74d9be429 arch/arm/src/lpc54xx: Add fragmenenty skeleon of SPI driver just as a starting point. 2017-12-11 14:50:54 -06:00
Gregory Nutt
11ca2c3847 arch/arm/src/lpc54xx: Rename I2C and SPI configurations to make room in the namespace for future slave support. Add fragmenenty skeleon of I2C driver just as a starting point. 2017-12-11 13:28:55 -06:00
Gregory Nutt
5854a1cd37 arch/arm/src/lpc54xx/chip: Add framework that will eventually support I2C and SPI. 2017-12-11 10:40:45 -06:00
Gregory Nutt
0508048291 configs/lpcxpresso-lp54629: Add logic to configure EMC pins. arch/arm/src/lpc54xx: Correct GPIO read/write logic. Update pin configuration for EMC pins. All should have the input file offset and fast slew rate. 2017-12-11 09:07:51 -06:00
Gregory Nutt
df3404da09 arch/arm/src/lpc54xx: Various fixes for initial build of SDRAM support. Still unverified (but at least appears to be nonfatal). 2017-12-10 17:20:16 -06:00
Gregory Nutt
1f6dfc6351 arch/arm/src/lpc54xx: Bring in NXP support for external SRAM. 2017-12-10 16:52:15 -06:00
Gregory Nutt
dab97de4ea arch/arm/src/lpc54xx: Bring in NXP support for external SDRAM. 2017-12-10 16:07:30 -06:00
Gregory Nutt
77728f49f1 arch/arm/src/lpc54xx: Add EMC register definitions. Add basic build support for EMC and SDRAM. 2017-12-10 12:40:01 -06:00
Gregory Nutt
66ee22f363 arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board. 2017-12-10 08:54:24 -06:00
Gregory Nutt
187747d2e5 arch/arm/src/lpc54xx: Add DMA register definition header file. 2017-12-09 15:24:21 -06:00
Gregory Nutt
9bc3c04eaf /arch/arm/src/lpc54xx: Add input mux header files. 2017-12-09 11:15:44 -06:00
Gregory Nutt
4bc7b966f4 /arch/arm/src/lpc54xx: Add some GPIO pin interrupt header files (still missing one). Also add a file that was missing in previous commit. 2017-12-09 10:12:40 -06:00
Gregory Nutt
52f9128562 arch/arm/src/lpc54xx: Add USART pin configuration. Need enable IOCON and GPIO clocking. 2017-12-09 09:11:17 -06:00
Gregory Nutt
246a97008e arch/arm/src/lpc54xx: Minor updates from review of recent changes 2017-12-08 17:32:31 -06:00
Gregory Nutt
89c21dbf05 arch/arm/src/lpc54xx/chip: Add pin multiplexing definition head file. 2017-12-08 16:11:05 -06:00
Alan Carvalho de Assis
a2462b9b1a arch/arm/src/xmc4: Only setup USB clock when USB PLL is enabled 2017-12-08 13:16:55 -06:00
Gregory Nutt
da6c604ed1 Squashed commit of the following:
configs/lpcxpresso-lpc54628:  Add support for on-board LEDs.
    arch/arm/src/lpc54xx:  Add support for GPIO/Peripheral pin configuration.
    arch/arm/src/lpc54xx/chip:  Add IOCON register definition file.
    arch/arm/src/lpc54xx:  Add GPIO and (incomplete) PINT register definition header files.
2017-12-08 13:12:07 -06:00
Masayuki Ishikawa
ab96e3fdc7 Merged in masayuki2009/nuttx.nuttx/lc823450_smp_improvement (pull request #554)
lc823450 smp improvement

* arch/arm/src/common: Apply irq_spin APIs to modifyregXX

    Replace enter_critical_section with spin_lock_irqsave.
    Replace leave_critical_section with spin_unlock_irqrestore.

    Please see 6150299f54 as well.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Do not use modifyreg32() to enable Mutex.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Modify IRQ control for i2s

    Interrupt will be handled on CPU0 with this change.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Apply irq_spin APIs to dma/syscontrol/usbdev.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Assign CPU1 to lpwork

    This change will improve load balancing for networking with RNDIS.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* drivers/audio/wm8776.c: Improve stability in SMP mode

    Apply irq_spin APIs to improbe performance.
    Repeat to process a message to avoid deadlock.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Enable SPINLOCK_IRQ and NXPLAYER in rndis

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-08 12:31:34 +00:00
Gregory Nutt
8bc90a1899 This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available.
Squashed commit of the following:

    arch/arm/src/lpc54xx:  Finish off some missing logic.  Complete now execpt for GPIO and LED support.
    arch/arm/src/lpc54xx:  Add lpc54_clrpend.c
    arch/arm/src/lpc54xx:  Serial driver is complete and compiles.
    arch/arm/src/lpc54xx:  Add beginning of a serial driver (still missing some logic)
    arch/arm/src/lpc54xx:  Fleshes out low level USART intialization.
    arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
    arch/arm/src/lpc54xx:  Beginning of USART console support.
    arch/arm/src/lpc54xx: Completes very basic clock configuration.
    arch/arm/src/lpc54xx:  Add clocking logic (still not complete)
    arch/arm/src/lpc54xx:  Beginning of PLL configuration logic.
    arch/arm/src/lpc54xx:  Fix a few things from first compile attempt.  Compilation cannot work until I at least finish the clock configuration logic.
    arch/arm/src/lpc54xx: Addes some SysTick logic.
    arch/arm/src/lpc54xx:  Completes basic startup logic (sans clock configuration) and interrupt configuration.
     arch/arm/src/lpc54xx:  Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
    arch/arm/src/lpc54xx:  Add (incomplete) SYSCON register definition header file.
    arch/arm/src/lpc54xx:  Add FLEXCOMM header file.
    arch/arm/src/lpc54xx:  Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
    arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
    LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
    arch/arm/src/lpc54xx:  Add (incomplete) USART header file.
    Add another condition to a Kconfig; refresh a defconfig.
    arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
    configs/lpcxpresso-lpc54628:  Add basic build files for the LPCXpresso-LPC54628
    arch/: Basic build directory structure for the LPC54628
2017-12-07 13:30:02 -06:00
Gregory Nutt
ba64499bc7 Triva fix of typos in comments. 2017-12-07 11:11:21 -06:00
Gregory Nutt
d540f3fd60 Costmetic update to comments and README. 2017-12-02 11:14:32 -06:00
Alan Carvalho de Assis
7311b132a1 arch/arm/src/xmc4/Kconfig: Define user friend SPI alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend I2C alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend LIN alias to follow other arch names
arch/arm/src/xmc4/Kconfig: Define user friend I2S alias to follow other arch names
2017-11-30 12:48:07 -06:00
Gregory Nutt
4eda9e92de arch/arm/src/lpc32xx: lpc32_adc.c was being selected by the build system wehn DAC was selected. 2017-11-27 10:12:03 -06:00
Masayuki Ishikawa
fb49472ec8 Merged in masayuki2009/nuttx.nuttx/lc823450_smp_audio (pull request #547)
lc823450 smp audio

* arch/arm/src/lc823450: Remove a workaround in up_cpu_paused()

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Introduce g_gpio_lock to improve write performance in SMP mode.

    NOTE: This is a tentative solution and should be replaced with more generic one.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch/arm/src/lc823450: Add a workaround in up_txready() to avoid data corruption.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Enable CONFIG_SMP for audio

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* configs/lc823450-xgevk: Update README.txt regarding SMP audio

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-27 07:20:54 +00:00
Gregory Nutt
318dd06f8b arch/arm/src/stm32: Fix compile error when trace is enabled. I2CEVENT_ERROR was used but never defined. 2017-11-26 06:51:12 -06:00
Gregory Nutt
5328e3bafb configs/: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: update occurrences in several Kconfig files 2017-11-25 18:46:43 -06:00
Alan Carvalho de Assis
674b331f03 arm/src/xmc4: Include Alt. Interrupt Enable to RX_EVENTS and rename serial GPIO configurations. 2017-11-25 18:13:23 -06:00
Gregory Nutt
4404be23cb XMC4 Serial: The Alternative Receive Interrupt was not being configured. 2017-11-25 12:21:33 -06:00
Gregory Nutt
776b65bc90 Revert "arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC."
This reverts commit 88982df09c.
2017-11-25 09:45:12 -06:00
Gregory Nutt
3160613db4 Revert "arch/arm/src/xmc4/xmc4_config.h: Add a check to doubly enforce the one UART per USIC rule."
This reverts commit 63026b789b.
2017-11-25 09:44:51 -06:00
Gregory Nutt
63026b789b arch/arm/src/xmc4/xmc4_config.h: Add a check to doubly enforce the one UART per USIC rule. 2017-11-25 08:41:47 -06:00
Gregory Nutt
88982df09c arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC. 2017-11-25 08:19:43 -06:00
Alan Carvalho de Assis
639f77341a arch/arm/src/xmc4: Remove hard-coded values in clock configuration. USB will be fixed later. 2017-11-25 06:39:44 -06:00
Alan Carvalho de Assis
0ac8ac240a arch/arm/src/xmc4: Do not run at 144MHz unless BOARD_FCPU_144MHZ is selected in the board.h header file. 2017-11-24 12:47:47 -06:00
Gregory Nutt
37a9808dc9 Cosmetic fix to some alignment. 2017-11-24 08:34:39 -06:00
Gregory Nutt
a197676006 Fix typos in some comments. 2017-11-23 14:21:57 -06:00
Gregory Nutt
d1e234e179 STM32: Remove usb_dumpbuffer() macro from OTGFS device. It cannot be controlled via Kconfig and therefore will not be supported. 2017-11-23 06:37:21 -06:00
Gregory Nutt
cbfaca8a14 STM32 L4 USB OTGFS: Remove dumpbuffer feature added in the last commit. I don't want in features that cannot be controlled be via Kconfig files and I do not accept debug code in the upstream GIT. My mistake for merging it in the first place. 2017-11-22 13:26:15 -06:00
raiden00pl
83699beb10 stm32f33xxx_rcc: fix CAN clock enable 2017-11-22 09:26:07 +01:00
Gregory Nutt
c52fab653d Replicate Jussi Kivilinna's change for the newly added STM32F2xx and F3xx family members. This change allows selecting voltage output scale mode and enable over-drive only when needed. 2017-11-21 06:44:19 -06:00