Commit Graph

252 Commits

Author SHA1 Message Date
Gregory Nutt
547a3cb3d9 Run all .c and .h files in previous commits through nxstyle. 2020-03-22 08:24:07 -05:00
Gregory Nutt
66ab039b89 drivers/: Remove support for CONFIG_FS_WRITABLE 2020-03-22 08:24:07 -05:00
GAEHWILER Reto
85e461c59c STM32H7/STM32F30: Typos, register correction and extension
* Correction in stm32h7x3xx_rcc
* Adding GPIO_TIM2_CH1OUT_1 to stm32f30xxx_pinmap
* Comment typo fix in drivers/mmcsd/mmcsd_spi.c
2020-03-03 09:20:58 -06:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Gregory Nutt
21aef0dd68 drivers/*/Kconfig: Consolidate driver Kconfig Files.
This commit does two things:

1. First, it reorganizes the driver Kconfig files so that each is self contained.  Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig.  Now, all of the driver configuration is consolitated in the latter.

2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files.  This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.

The nature of the introduced error was basically this:

- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.

This error was easy to make because the driver Kconfig files were not well modularized.  Making them fully self-contained should eliminate this kind of error in the future.
2020-02-15 15:19:11 +01:00
Xiang Xiao
3cb259daa6 drivers/Kconfig: Move if/endif to subfolder Kconfig
Move if/endif to subfolder Kconfig and make ARCH_HAVE_XXX option always selectable by moving out of if/endif
2020-02-08 08:04:05 -06:00
Xiang Xiao
ac2aec96e0 Refine Kconfig under drivers folder
1.Move subsystem config into sub folder
2.Remove the duplicated if/endif

Change-Id: I0b96ac0570ee1ba62bbb95586381f5410b90bcf0
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-06 08:47:30 -03:00
Xiang Xiao
5c80b94820 Replace #include <semaphore.h> to #include <nuttx/semaphore.h>
Since the kernel side should call nxsem_xxx instead and remove the unused inclusion
2020-02-01 08:27:30 -06:00
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189)
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Gregory Nutt
4465916c5e drivers/mmcsd/mmcsd_sdio.c: Correct typo noted in Issue 180 2019-11-30 09:27:55 -06:00
Gregory Nutt
0002258f17 drivers/mmcsd/mmcsd_sdio.c: Commit 29612c40c5 slipped on by me: None of the common code may include ANY GCC dependencies. Fixed appropriately by adding a definition for the compiler dependency in include/nuttx/compiler.h. 2019-10-31 18:02:14 -06:00
David S. Alessio
29612c40c5 drivers/mmcsd/mmcsd_sdio.c: Align DMA buffer for MBURST size. 2019-10-31 07:18:47 -06:00
David Sidrane
5f65012449 drivers/mmcsd/mmcsd_sdio.c: Enter a removed card state On a failure. If we fail to read cardstatus in mmcsd_transferready consider this a hard error and set the card to removed. 2019-10-29 10:05:10 -06:00
David Sidrane
b7073a366b drivers/mmcsd/mmcsd_sdio.c: Set wrbusy after success of all the operations. Any failure could leave wrbusy set when it should not be if the operation failed. 2019-10-29 10:03:18 -06:00
Gregory Nutt
6ddd4752b0 Eliminate new warnings found in build testing. 2019-08-21 13:45:31 -06:00
Gregory Nutt
cc945b00e0 drivers/mmcsd/mmcsd_sdio.c: Correct a misplaced #endif. 2019-08-21 11:22:59 -06:00
Ivan Ucherdzhiev
f2c6a3f108 drivers/mmcsd/mmcsd_sdio.c: Copy/paste error fix for MMC. 2019-08-21 09:26:54 -06:00
Ivan Ucherdzhiev
19c070e0d1 drivers/mmcsd: Added support for MMC(eMMC) bigger than 2 GB (Tested with IMXRT1050EVKB and samsung eMMC 16GB). arch/arm/src/imxrt: IMXRT uSDHC driver cmd line reset logic modified. 2019-08-21 09:23:29 -06:00
Anthony Merlino
5cd2a1ae68 Merged in antmerlino/nuttx/mmcsd-bugfix (pull request #893)
drivers/mmcsd: Fixes bug where thread gets deadlocked due to recursive call and addresses comment regarding events.

When initializing the MMCSD, if we are being told there is a card, but we fail to initialize it, we should not re-register for an insertion event as this will immediately cause us to call in again. Instead, we should register for a removal event and wait for the card to be removed and re-inserted.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-06-13 01:27:02 +00:00
Gregory Nutt
3e848fb893 Merged imxrt1020 into master 2019-04-30 16:08:46 -06:00
Bob Feretich
c6851201c0 This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache().
The user of this invalidation are mmcsd_sdio currently.  The mmcsd_sdio driver makes calls for dcache invalidation through the chip specific architecture function SDIO_DMARECVSETUP(). I changed the arch/arm/stm32f7 chips to use arch_invalidate_dcache_by_addr() instead of arch_invalidate_dcache().

This commit includes additional changes to mmcsd_sdio.c.  I created SDIO_DMADELYDINVLDT() (DMA delayed invalidate) to invalidate store-into mode dcaches after the DMA transfer.  I have been using SDIO_DMADELYDINVLDT() for several weeks now and it has fixed the problems that I previously reported regarding non-cache aligned buffer invalidation errors (for my store-through dcache). However, it does not permit use of unaligned DMA buffers for store-into mode dcaches.

SDIO_DMADELYDINVLDT() is a NoOp unless the chip specific Kconfig file selects CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT. I have modified all the stm32f7 chips to select it.
2018-11-20 14:03:42 -06:00
Gregory Nutt
31485356b8 Updates based on coding style review of PR 755 2018-11-09 07:51:43 -06:00
Petteri Aimonen
96da659c0b Merged in paimonen/nuttx/pullreq_FAT_improvements (pull request #755)
Pullreq FAT improvements

* NuttX: Add CONFIG_FAT_LFN_ALIAS_HASH to speed up creating long filenames.

    Long filenames on FAT filesystems have associated 8.3 character alias
    short filenames. The traditional form of these is FILENA~1.EXT with
    a running count of the number of similar names. However creating this
    unique count can take several seconds if there are many similarly named
    files in the directory. Enabling FAT_LFN_ALIAS_HASH uses an alternative
    format of FI0123~1.TXT where the four digits are a hash of the original
    filename. This method is similar to what is used by Windows 2000 and
    later.

* NuttX: Add CONFIG_FAT_LFN_ALIAS_TRAILCHARS alternative format for 8.3 filenames.

    Traditional format for long filename 8.3 aliases takes first 6
    characters of long filename. If this option is set to N > 0,
    NuttX will instead take first 6-N and last N characters to form
    the short name. This is useful for filenames like "datafile12.txt"
    where the first characters would always remain the same.

* NuttX: FAT32: Fix file date corruption in fat_truncate().

* NuttX: if SD card wait seems to be a long one, give time for other threads to run.

Approved-by: GregoryN <gnutt@nuttx.org>
2018-11-09 13:46:16 +00:00
Gregory Nutt
5c8831c886 drivers/mmcsd/Kconfig: Remove executable bit from file permissions. 2018-10-30 09:48:53 -06:00
Dave Marples
d1c01e1135 With these changes the SDMMC card for LPC4330 is now working properly BUT it needs more testing, especially with different cards etc. This code should be applicable to all members of the lpc43xx family.
In addition to the problems that were previously identified there were a few other bits and pieces outstanding;

  * Timing was dependent on CPU speed rather than absolute time
  * End of transfer handling was a bit mixed up
  * It's possible for data to still be in the FIFO (i.e. not have reached
    the card) when a next write is requested, so we need to wait for that to
    complete
  * Interrupt Status could be carried over from one transfer episode to the
    next, corrupting progress
  * Multi-descriptor DMA writing simply wasn't implemented, but there were no
    indications ... it just failed silently
2018-10-24 18:06:38 -06:00
Gregory Nutt
4e5cf1229c drivers/mmcsd/Kconfig: three configuration settings were within ifdef/endif and led to warning: xxx selects xxxx which has unmet direct dependencies. Fix by moving settings to drivers/Kconfig and outside of the ifdef-endif. Also renamed CONFIG_SDIO_PREFLIGHT to CONFIG_ARCH_HAVE_SDIO_PREFLIGHT to follow naming of similar hidden architecture capability configurations. 2018-08-05 17:58:17 -06:00
Gregory Nutt
92890552f1 drivrs/mmcsd: Partial reversion of commit 17b6c7ba39. Backed out all block callback logic controlled CONFIG_SDIO_BLK_CALLBACK. Usage of this feature by applications is a blatant violation of the POSIX interface standard. 2018-07-20 10:08:01 -06:00
Bob Feretich
17b6c7ba39 drivers/mmcsd/mmcsd_sdio.c: Fix an error that was causing SDIO multiple block transfers from achieving full performance. Also adds a feature controlled by CONFIG_SDIO_BLK_CALLBACK that bypasses the normal mechanism for obtaining sector data for transfer. 2018-07-20 09:55:33 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
2018-06-16 12:16:13 -06:00
Michał Łyszczek
8de51543a4 Fix a few compilation errors. 2018-04-20 15:55:16 -06:00
Evgeniy Bobkov
7d36a81806 Fixes two bugs in multi-block SD-card operations on the STM32F7 platform. arch/arm/src/stm32f7: DBLOCKSIZE must be the size of SD-card block, not the total amount of transferred bytes. drivers/mmcsd: respect SDIO_CAPS_DMABEFOREWRITE on CMD25. 2018-01-16 12:41:02 -06:00
Gregory Nutt
eef12f1f91 arch/arm/src/lpc54xx: In SDMMC driver, add logic to transfer data when TXDR or RXDR interrupts occur. Also, add logic to set the RX watermark to 2 when receiving short, non-DMA data transfers. 2017-12-20 17:27:52 -06:00
Gregory Nutt
c867d42018 arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC. 2017-12-20 10:52:05 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following:
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following:
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following:
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Gregory Nutt
28637e644d Eliminate warning of unused global variables in certain configurations. 2017-08-12 16:33:34 -06:00
Julien Lecoeur
165ee0027a Eliminate a warning with arm-none-eabi-gcc 7.1.0 2017-07-06 08:32:51 -06:00
Gregory Nutt
e9a5477506 Add an instance argument to the SPIDEV definitions. 2017-04-29 12:26:52 -06:00
David Sidrane
11d1b2e636 Typo mmcsd/mmcsd_sdio.c 2017-02-13 13:24:47 -10:00
Marc Rechté
d501ffc563 Kinetis SDHC driver fixes. 2017-02-09 11:28:30 -06:00
Alan Carvalho de Assis
248d5d3185 MMC/SD SDIO: Some drivers need to start DMA before sending CMD24 and some AFTER 2017-02-09 11:13:05 -06:00
Gregory Nutt
764f503150 Remove duplicate setting for SDIO_DMA from drivers/mmcsd/Kconfig 2017-02-06 13:16:52 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
2a4791f4ee Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set. 2017-01-31 09:51:15 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Alan Carvalho de Assis
c482437325 MMCSD_SDIO: Only wait for card ejected if card detection is supported 2017-01-26 07:44:17 -06:00
Gregory Nutt
2d9668fbd2 Fix a typo in a comment 2017-01-12 16:24:41 -06:00
Gregory Nutt
4795d58e03 Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers. 2016-12-15 07:16:24 -06:00
Gregory Nutt
ca92ecafa7 MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine. 2016-12-14 17:44:12 -06:00
Gregory Nutt
f4f32bc740 MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines. 2016-12-14 17:04:27 -06:00
Alan Carvalho de Assis
3c4a8d05b0 MMC/SD SDIO driver: Change the endianess order to read the return of long response command 2016-12-14 14:17:52 -06:00
Gregory Nutt
46dbbe837e rwbuffer.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:54:38 -06:00
Gregory Nutt
6fda036615 Eliminate a warning 2016-07-13 14:09:51 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
efb02f2ef1 drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors. 2016-06-12 08:31:22 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
fd896330d8 Remove the final vestiges of up_spiinitialize() 2016-01-27 09:27:56 -06:00
Gregory Nutt
7edf921c5e Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8 All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features 2016-01-23 16:18:13 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
b682190f52 Rename all head files in main NuttX repository with names like *internal.h, removing the internal 2015-12-29 17:31:17 -06:00
Gregory Nutt
cf14f8d1b5 drivers/: Fixes to spacing and alignement 2015-10-10 10:41:00 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
0476d8168a More missing semicolons after DEBUGASSERT 2015-05-27 13:32:39 -06:00
Gregory Nutt
2aa80e06f5 Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
Gregory Nutt
e4d2822af8 Make some file section headers more consistent with standard 2015-04-08 07:15:32 -06:00
Gregory Nutt
8783526a5f Fix some bad logic when file system debug is turned on: Arguments to syslog were missing so that garbage was being printed. 2015-03-15 09:34:07 -06:00
Gregory Nutt
c5953bd0e9 Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf
and this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf) shows that ACMD23
must be preceeded with CMD55 command as any other ACMD commands.

Also, after the block reading wait loop must be inserted before writing the next block of data to
the sd card

From Dmitry Nikolaev via Jussi Kivilinna
2015-03-13 07:26:16 -06:00
Gregory Nutt
82251ccf28 Cosmetic updates from code review 2015-03-04 06:51:56 -06:00
Gregory Nutt
83d6e6403c drivers/mmcsd/Kconfig: ARCH_HAVE_SDIOWAIT_WRCOMPLETE should not depend on MMCSD_SDIO 2015-01-09 07:21:43 -06:00
Gregory Nutt
089e001874 STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y 2015-01-08 18:12:06 -06:00
Gregory Nutt
f787440a04 STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE 2015-01-08 17:47:34 -06:00
Gregory Nutt
1842525cc2 MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
2015-01-08 06:23:42 -06:00
Gregory Nutt
d7d759f7a7 Update everything under nuttx/drivers to use the corrected syslog interfaces 2014-10-08 10:18:58 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
9c80dfb31c Updated README file, cosmetic changes to comments and debug output 2014-07-30 10:19:09 -06:00
Gregory Nutt
be8fe9a311 Costmetic update to comments 2014-07-29 20:03:52 -06:00
Gregory Nutt
8516551e54 Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete) 2014-07-11 11:20:11 -06:00
Gregory Nutt
2abe0dd6dd Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
5d7da97a35 SDIO-based MMC/SD improvements from Bob Doiron 2014-04-21 17:15:42 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
303cc1902b Make sure that there is one space between if and condition 2014-04-12 12:53:19 -06:00
Gregory Nutt
27811d28f9 Cosmetic changes to comments and README 2014-04-07 15:28:04 -06:00
Gregory Nutt
6a524b5734 Enhanced the mmcdd_sdio driver to perform DMA preflight operations and fail DMA read/write requests that fail preflighting. From Mike Smith 2013-10-18 08:24:18 -06:00
Gregory Nutt
944e0fe81d Changes to stm32_dmacapable interfaces from Mike Smith 2013-10-18 08:06:23 -06:00
Gregory Nutt
773a693ee2 Cosmetic changes to comments and coding style fixes 2013-09-22 14:48:22 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
dd3c682443 SAMA5: Some improvements to the HSCMI card removal/insertion logic 2013-08-11 11:13:11 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
97e13b33ab MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier 2013-08-10 18:29:22 -06:00
Gregory Nutt
da4cebf572 SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
ce9eb71495 SAMA5: A few early, easy bug fixes. The rest will all be difficult 2013-08-06 11:29:53 -06:00