Gregory Nutt
42a0796615
Squashed commit of the following:
...
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552
Squashed commit of the following:
...
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Sebastien Lorquet
9ea215f2e4
Merged in slorquet/nuttx/mt25q (pull request #501 )
...
Add support for Micron MT25Q series MT25Q128
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-10-02 18:33:54 +00:00
Simon Piriou
b1f50490bd
MTD: Add driver for Macronix QuadSPI flash memory
2017-08-06 10:51:17 -06:00
Gregory Nutt
e8738e1f55
Minor update to some comments.
2017-08-04 09:00:58 -06:00
Gregory Nutt
bbc06dcd8e
RAMTRON: Should be able to select chunked write mode via a configuration option, not by editing the file.
2017-08-04 08:49:07 -06:00
Boris Astardzhiev
79ee0a5209
RAMTRON: Add support for splitting block writes in chunks. Some Re-RAMs like MB85AS4MT has a write buffer size limitation.
2017-08-04 08:12:59 -06:00
Gregory Nutt
95e20afcd2
drivers/: Remove dangling space at the end of lines.
2017-06-28 13:17:17 -06:00
Jussi Kivilinna
4eaa136850
smart: fix wrong freeing of device structure and use-after-free issues on error paths
2017-06-28 07:20:07 -06:00
Jussi Kivilinna
7b8df1b930
mtd/w25: wait for BUSY flag to clear in w25_readid and w25_unprotect. W25Q128 datasheet says that all instructions expect 'Read Status Register' and 'Erase/Program Suspend' are ignored when BUSY flag in status register is '1'. Therefore wait for busy flag to clear in w25_readid() and w25_unprotect().
2017-06-13 07:35:49 -06:00
Jussi Kivilinna
2596b14c90
mtd/w25: add missing locking and fix SPI_SELECT usage for w25_unprotect
2017-06-13 07:33:34 -06:00
Gregory Nutt
0a85a41678
MTD FLASH driver: Clone Sebastien Lorquet's m25px change to at25, is25xp, ramtron, and sst25xx.
2017-06-12 09:51:42 -06:00
Sebastien Lorquet
2851959dee
MTD M2PX: If we READ while a write/erase is pending, the command is ignored and the write/erase continues. If we dont catch this situation we will return garbage to the user because the flash will not execute the command. So READ MUST wait for write completion, and before that, the bus must be locked since it's a precondition to calling waitwritecomplete().
2017-06-12 09:34:09 -06:00
Gregory Nutt
d35a060a41
Revert "MTD: Fix problems in SPI locking in mp25x.c driver. Same problem probably in exists in several other drivers that derive from this this driver as well."
...
This reverts commit 85645284b3
.
2017-06-12 07:23:06 -06:00
Sebastien Lorquet
85645284b3
MTD: Fix problems in SPI locking in mp25x.c driver. Same problem probably in exists in several other drivers that derive from this this driver as well.
2017-06-12 06:38:27 -06:00
Gregory Nutt
670d6a1e8d
MTD FLASH drivers: The byte write method of several drivers had a cloned error: It was not locking the bus while performing byte write operations.
2017-06-06 16:10:41 -06:00
Juha Niskanen
06edfae133
mtd/config: Add some error checks for I/O errors
2017-06-01 06:22:27 -06:00
Jussi Kivilinna
7af5cbb833
drivers/mtd/w25.c: Enable short delay after sector/chip erase
2017-05-31 09:17:58 -06:00
Jussi Kivilinna
8b006e705e
drivers/mtd/w25.c: erase sector only if it is not in erased state
2017-05-31 09:09:24 -06:00
Jussi Kivilinna
c7fcdf968d
mtd/smart: Fix use of uninitialized variable
2017-05-31 09:07:25 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Juha Niskanen
0f7210b0ae
mtd: fix some unallocated and NULL pointer issues. rwb->wrflush and rwb->wrmaxblocks in rwbuffer could get unallocated values from ftl_initialize() in some configurations. Also fixes related assert:
...
up_assert: Assertion failed at file:rwbuffer.c line: 643
that can happen with the following configuration:
CONFIG_FTL_WRITEBUFFER=y
CONFIG_DRVR_WRITEBUFFER=y
# CONFIG_FS_WRITABLE is not set
These problems are caused by CONFIG variable differences between the buffer layers. TODO: This is not a perfect solution. readahead support has similar issues.
2017-05-11 07:22:21 -06:00
Juha Niskanen
58a0b09b82
mtd/config: fix byte read interface test
2017-05-11 07:19:24 -06:00
Juha Niskanen
797e3c3ca4
mtd: build RAMTRON and AT45DB drivers only if selected
2017-05-11 07:17:29 -06:00
Juha Niskanen
4f18b40429
mtd/config: erase block between block read and write
2017-05-10 08:25:39 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Heesub Shin
a10735b50d
mtd/progmem: fix incorrect target address calculation
...
progmem_read/write() is incorrectly calculating the target address,
expecting the offset argument is given in a block number. This is
completely wrong and as a result invalid flash region is accessed.
Byte-oriented read/write interfaces of mtd device accept the
target address in a byte offset, not a block number.
Signed-off-by: Heesub Shin <heesub.shin@samsung.com>
2017-03-19 01:11:37 +09:00
Gregory Nutt
a70ea9d3bc
Typos withim mtd/ with Macronix MX25L. In NuttX/drivers/mtd/Make.defs letters X between M and 25 are missing. Noted by Oleg Evseev.
2017-01-30 07:26:38 -06:00
Gregory Nutt
5e0c18b535
Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198 )
...
Adding missing CONFIG_ prefix
2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b
Adding missing CONFIG_ prefix
2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b
drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered.
2017-01-15 13:00:50 -06:00
Aleksandr Vyhovanec
bf528f2071
packed_struct replaced by begin_packed_struct and end_packed_struct
2017-01-09 14:17:49 +03:00
Gregory Nutt
1793c1f8e1
Trivial, cosmetic change
2016-11-29 15:03:51 -06:00
Gregory Nutt
8dd2494407
Review of last PR: Fix return value (ERROR is not a value return value in this context). Fix some spacing.
2016-11-01 15:13:09 -06:00
Aleksandr Vyhovanec
be1626ad7b
Added EEPROM timeout
2016-11-02 00:03:16 +03:00
Aleksandr Vyhovanec
b0f973d901
MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F.
2016-09-02 11:00:04 -06:00
Aleksandr Vyhovanec
3f40541b21
MTD: Fixed cloned typos in several FLASH drivers.
2016-09-02 07:27:57 -06:00
Beat Küng
dd1f679891
mtd: Add Fujistu MB85RS256B ramtron support
...
contributed by flatlevel from https://github.com/PX4/NuttX/pull/79
2016-08-23 18:27:04 +00:00
Gregory Nutt
9965cbe428
drivers/: Review and correct some stylistic inconsistencies
2016-08-07 09:43:48 -06:00
Gregory Nutt
10fff9011a
Move include/nuttx/configdata.h to include/nuttx/mtd/configdata.h
2016-07-21 13:34:54 -06:00
Gregory Nutt
46dbbe837e
rwbuffer.h moved from include/nuttx/ to include/nuttx/drivers.
2016-07-20 13:54:38 -06:00
Ken Pettit
39174da3be
Remove naming conflict in drivers/mtd/filemntd.c
2016-07-17 20:19:44 -06:00
Ken Pettit
fea2aaba05
SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256, adds DEBUGASSERT for invalid geometry and additional memory debug logic. Also fixes the dangling pointer on error bug.
2016-07-14 10:31:28 -06:00
Gregory Nutt
74037a7951
Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #97 )
...
fixes to n25qxxx mtd driver for smartfs support, etc...
2016-07-12 12:16:13 -06:00
ziggurat29
74777499bc
alter the notion of 'blocksize' to be equivalent to 'flash write page size' in order to align with assumptions in the smartfs driver (at least, maybe other things do as well).
...
Correct a bug that was previously masked by having blocksize=eraseblocksize which would cause buffer overflows and delicious hardfaults.
Trivial spelling changes in comments, etc.
2016-07-12 11:46:08 -05:00
Sebastien Lorquet
0d41a1cd42
Before accessing the sst26 flash, the "Global Unlock" command must me executed, which I do in the sst26 driver.
...
BUT. re-reading the datasheet, the WREN instruction is required to enable the execution of this command. This was not done.
I have no idea how the driver currently works except by chance. The writes
should never happen at all, the flash is half-enabled!
2016-07-12 10:34:03 -06:00
Gregory Nutt
5b6fafb3f5
Several MTD FLASH drivers nullify the freed 'priv' structure and failed to return NULL as stated in the comments. Result, will operate on a NULL pointer later. Noted by David Sidrane.
2016-06-30 17:49:53 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
efb02f2ef1
drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors.
2016-06-12 08:31:22 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Gregory Nutt
5f9bcfd5bf
Trivial changes from review of last PR
2016-06-09 09:36:06 -06:00
Gregory Nutt
03c44c3583
Merged in marten_svanfeldt/nuttx-public/for_upstream/is25 (pull request #44 )
...
Added driver of IS25xP SPI flash devices
2016-06-09 09:30:34 -06:00
Marten Svanfeldt
edeb2eed4e
Added driver of IS25xP SPI flash devices
...
Based on sst25xx driver
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2016-06-09 05:13:06 +02:00
Gregory Nutt
a18dbfda6e
Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call.
2016-06-02 10:44:13 -06:00
Sebastien Lorquet
880b59aa26
Additional configuration option to enable SST26 driver debug output. Using comming FS debug output generates too much output.
2016-05-25 13:43:44 -06:00
Sebastien Lorquet
f4fa4799f7
Add a driver for SST26F spi/qspi flash devices (SPI mode only)
2016-05-10 11:09:15 -06:00
ziggurat29
d3fbd86657
bug in smart.c; return code of smart_scan not checked, can cause success result in failure case, leading to 'dev' pointer being invalid.
2016-04-27 19:33:45 -05:00
Gregory Nutt
e8f0965d35
Mostly cosmetic changes from review of last PR
2016-04-17 14:13:44 -06:00
ziggurat29
1b9d837df3
add MTD support for Micron N25Qxxx family of QSPI flash
2016-04-17 12:20:07 -05:00
Gregory Nutt
84cd720479
FTL: Make it clear the the unlink method has not been implemented
2016-04-15 07:03:28 -06:00
Paul A. Patience
c62bb9beb1
Fix issues detected by cppcheck
2016-03-22 15:46:47 -04:00
Gregory Nutt
3ef25dc49d
AT24xx: Add logic to unregister from the procfs file system if the driver is uninitialized
2016-03-17 09:55:10 -06:00
Max Neklyudov
1951b9df57
Improve m25px driver
2016-03-17 07:37:45 -06:00
Gregory Nutt
7fa0adff83
Fix a misplaced right bracket
2016-03-08 15:33:33 -06:00
Frank Benkert
4d9c41fd57
AT24XX: Correct address calculation in Multi-Block-Read
2016-03-08 15:31:23 -06:00
Gregory Nutt
0fb035f76b
Standardize some naming in code section comments
2016-02-21 18:09:04 -06:00
Gregory Nutt
009e9f76cb
I2C: Fixes/improvements from last massive I2C commits
2016-02-02 07:13:03 -06:00
Gregory Nutt
69ce24c70c
I2C: Remove the setfrequency method from the interface
2016-02-01 16:31:13 -06:00
Gregory Nutt
f9053182d3
I2C: Remove setaddress method
2016-02-01 12:14:31 -06:00
Gregory Nutt
8c9bddf998
I2C: Eliminate the I2C_WRITE and I2C_READ macros
2016-02-01 08:57:22 -06:00
Gregory Nutt
3a781a2d3f
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
2016-01-30 08:36:47 -06:00
Gregory Nutt
ceb415204e
Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h
2016-01-30 08:00:16 -06:00
Gregory Nutt
7edf921c5e
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8
All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features
2016-01-23 16:18:13 -06:00
Gregory Nutt
f348e68069
Update to use 64-bit timer when available
2016-01-21 11:54:26 -06:00
Gregory Nutt
c16648b3fd
Most cosmetic but also includes a fix for a compile problem from Ken Pettit
2015-12-01 12:54:57 -06:00
Gregory Nutt
3af1def49a
Fix an error in a function prototype
2015-11-29 14:42:56 -06:00
Ken Pettit
5821af1bbe
drivers/mtd: Add support for /dev/smart loop device. From Ken Petit
2015-11-28 09:00:26 -06:00
Gregory Nutt
6ff67d3061
Minor changes from code review
2015-11-25 14:57:25 -06:00
Ken Pettit
d4a58af380
drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry.
...
drivers/mtd/filemtd.c: New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device. This is useful for testing on the simulation using the hostfs.
From Ken Petit
2015-11-25 14:46:28 -06:00
Gregory Nutt
289b3e281f
drivers/mtd/smart.c: Fix a compile error when CONFIG_MTD_SMART_MINIMIZE_RAM=y
2015-11-22 17:18:43 -06:00
Gregory Nutt
891589b307
drivers/mtd/smart.c: Add some run-time geometry tests
2015-11-22 17:10:42 -06:00
Gregory Nutt
54549ef082
Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'"
...
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b
Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'
...
directory and build.
2015-11-22 10:07:35 -06:00
Gregory Nutt
db2fe45666
Update some comments
2015-11-20 09:55:18 -06:00
Ken Pettit
d30b73be82
W25: Add support for byte write mode. From Ken Petit
2015-11-20 07:34:07 -06:00
Gregory Nutt
1c86c004c4
FLASH progmem memory MTD: Need to register with PROCFS if enabled
2015-11-19 06:57:02 -06:00
Ken Pettit
7b590ec9a2
drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit
2015-11-18 18:12:06 -06:00
Ken Pettit
f0f7dd9956
drivers/mtd/smart.c: Fix a Smart wear-leveling bug. From Ken Petit
2015-11-18 07:01:13 -06:00
Ken Pettit
7e58e4c4cf
W25: Fix W25 page read/write logic
2015-11-18 06:56:53 -06:00
Gregory Nutt
e61d51dab3
If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource
2015-11-17 08:39:06 -06:00
Gregory Nutt
724901ceb9
Add support for multiple AT24xx EEPROM devices
2015-11-17 07:40:17 -06:00
Gregory Nutt
015429684f
MTD progmem: Fix an address calculation
2015-11-13 11:32:34 -06:00
Gregory Nutt
2706b4f8aa
mtd_progmem.c: Fix calculation of block size
2015-11-13 09:19:25 -06:00
Gregory Nutt
fdb17620a0
Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h
2015-11-12 16:03:24 -06:00
Gregory Nutt
ef59f83a38
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Gregory Nutt
9f3edd6373
MTD Smart: Remove checks for 64KB erase block size. erasesize was changed to 32-bits in struct mtd_geometry_s
2015-11-11 08:25:03 -06:00
Gregory Nutt
2ff1b173f2
SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand
2015-11-11 08:15:08 -06:00
Gregory Nutt
08200d8f86
S24FL1: Fix so that the driver compiles with 512 byte block support
2015-11-10 13:34:33 -06:00
Gregory Nutt
eb1191df63
S24FL1: Fix an error in the page write logic
2015-11-10 12:48:29 -06:00
Gregory Nutt
965addb397
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
2015-11-10 11:33:35 -06:00
Gregory Nutt
2ab0832c26
Smart MTD: fix some outdated logic: geometray erase size is now 32-bits
2015-11-09 09:35:14 -06:00
Gregory Nutt
91429433f6
Correct naming of Spansion part. S25FL1, not ST25FL1
2015-11-07 11:51:09 -06:00
Gregory Nutt
b2bdba0824
S25FL1 FLASH driver: Fix return value from the bwrite() method
2015-11-07 11:26:53 -06:00
Gregory Nutt
bfeef77f1f
SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard
2015-11-05 11:25:39 -06:00
Gregory Nutt
a314b2ac11
ST25FL1: Fix error that was overwriting status
2015-11-05 10:38:47 -06:00
Frank Benkert
e772c56ef6
AT24xx EEPROM Driver: Correct typo from last changeset
2015-10-31 09:04:53 -06:00
Gregory Nutt
46b688e701
Merged in marten_svanfeldt/nuttx-public/for_upstream/at24cxx (pull request #28 )
...
Improvements of AT24xx MTD driver
2015-10-22 18:15:39 +08:00
Marten Svanfeldt
a31d1fd378
Make I2C frequency configurable for the AT24Cxx EEPROM driver
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 12:01:36 +08:00
Marten Svanfeldt
af9590eef7
Extend the AT24Cxx MTD driver with support for -04,-08 and -16 parts.
...
These parts utilize the same one-byte-address in the I2C protocol as the -02,
but requires different I2C addresses for different banks of the EEPROM.
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 12:01:36 +08:00
Gregory Nutt
cf14f8d1b5
drivers/: Fixes to spacing and alignement
2015-10-10 10:41:00 -06:00
Gregory Nutt
0b12dbf95d
Fix some spacing problems
2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0
Standardize naming used for public data and function groupings
2015-10-02 16:30:35 -06:00
Gregory Nutt
7d33e858dd
QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory
2015-09-06 09:37:34 -06:00
Gregory Nutt
f44320d2a6
ST25FL1: SAMV71 QSPI always does transfers in multiples of 4 bytes
2015-09-02 10:19:47 -06:00
Paul A. Patience
3b89eabd50
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2.
2015-09-01 13:52:29 -04:00
Gregory Nutt
ebd97dcf89
ST25FL1: Make buffers all even multiple of 32-bit values
2015-08-31 10:18:50 -06:00
Gregory Nutt
2d84270552
ST25FL1: Correct some compile problems when file system debug is enabled
2015-08-31 09:25:14 -06:00
Gregory Nutt
ed750f3600
ST25FL1: Changes after review of ST24FL1 clocking
2015-08-29 18:54:20 -06:00
Gregory Nutt
d6b0a8fe72
ST25FL1 driver is code complete
2015-08-29 15:58:54 -06:00
Gregory Nutt
4a1951b192
ST25FL1: Flesh out FLASH write logic
2015-08-28 12:01:08 -06:00
Gregory Nutt
d2653ef7a8
ST25FL1: Update for changes to QSPI interface definitions
2015-08-28 10:15:39 -06:00
Gregory Nutt
361e35a7be
QSPI: Make changes to interface to better work with the SAMV71
2015-08-27 14:16:51 -06:00
Gregory Nutt
7936819fcc
ST25FL1: Flesh out more initialization logic
2015-08-26 14:16:45 -06:00
Gregory Nutt
1cf57ae2bd
Cosmetic
2015-08-26 07:16:07 -06:00
Gregory Nutt
8fe0121e1a
Convert fragmentation ST24FL1 driver to use QSPI interface
2015-08-25 17:20:54 -06:00
Gregory Nutt
94ecf7ebad
drivers/mtd/st25fl1.c: Add a driver for ST25FL1*K QuadSPI FLASH parts
2015-08-25 09:10:12 -06:00
Gregory Nutt
3743d3d84a
Add configuration options for forthcoming st25fl1 devices
2015-08-24 08:00:39 -06:00
David Sidrane
c83d92e846
RAMTRON: Update driver to include support for newer RAMTRON parts.
2015-08-10 11:30:37 -06:00
Gregory Nutt
be09a87c0e
SST25: Eliminate some warnings
2015-07-03 14:38:33 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
d43a09275a
AT24 EEPROM driver. Fix some an incorrect variable name used in conditional compilation. SourceForge patch #55
2015-05-15 06:15:58 -06:00
Gregory Nutt
e4d2822af8
Make some file section headers more consistent with standard
2015-04-08 07:15:32 -06:00
Gregory Nutt
495f420978
Extend the AT24 EEPROM driver so that it supports: (1) the byte-oriented read() method, (2) parts with extended memory regions, and (3) parts with 8-bit addressing.
2015-03-17 14:27:27 -06:00
Gregory Nutt
b5bfb6762d
Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes
2015-03-05 08:08:11 -06:00
Gregory Nutt
e7470e0834
Update dates in all skeleton files
2015-02-13 06:13:34 -06:00
Gregory Nutt
f3427cb32a
mtd/ramtron.c: Table of parts is not terminated properly if CONFIG_RAMTRON_FRAM_NON_JEDEC is not defined
2015-02-09 16:35:58 -06:00
Gregory Nutt
1c39b67e32
STM32: Fix some incorrectly placed conditional logic
2014-12-26 12:41:35 -06:00
Gregory Nutt
33bcb5dbca
Back out some incorrect conditional compilation
2014-12-26 10:26:52 -06:00
Gregory Nutt
6daa9468f6
More RAMTRON related fixes from David Sidrane
2014-12-26 08:15:59 -06:00
Gregory Nutt
996d6c9d55
Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane
2014-12-26 07:59:09 -06:00
Gregory Nutt
a84bd3f433
M25P serial flash driver: Add subsector size of the M24P16 part. From Lazlo
2014-12-10 18:48:36 -06:00
Gregory Nutt
cdc8fc52d1
SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit
2014-12-09 14:11:15 -06:00
Gregory Nutt
bc3212d70e
EEPROM: Add a README file
2014-11-27 09:14:00 -06:00
Gregory Nutt
40b27115cc
Add support for generic EEPROM access via a character driver. Add also the EEPROM driver itself. From Sebastien Lorquet
2014-11-26 13:55:34 -06:00
Gregory Nutt
2994448d85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
Gregory Nutt
d9b238b002
Extend MTD support to M25P16. From Sébastien Lorquet
2014-11-07 10:35:03 -06:00
Gregory Nutt
b33f8b3013
MTD read-ahear/write buffering layer seems functional
2014-09-25 13:35:10 -06:00
Gregory Nutt
7c89724b99
A few fixes for clean apps/examples/mtdrwb build
2014-09-25 10:41:47 -06:00
Gregory Nutt
6626f62b08
In at45db_bwrite, the buffer is not increased when writing more than 1 page. Sourceforge bug #34
2014-09-25 06:48:04 -06:00
Gregory Nutt
34a057334c
Update SMART FS procfs support. From Ken Pettit
2014-09-22 11:19:49 -06:00
Gregory Nutt
205260d5e2
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
Gregory Nutt
c9661ad5a7
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
2014-08-07 18:00:38 -06:00
Gregory Nutt
3042fc5bc0
Missing closing quote in Kconfig file
2014-07-11 16:51:50 -06:00
Gregory Nutt
e91704c432
Minor Kconfig improvements
2014-07-11 16:25:35 -06:00
Gregory Nutt
ab1ab379dd
Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL
2014-07-11 16:19:17 -06:00
Gregory Nutt
8516551e54
Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete)
2014-07-11 11:20:11 -06:00
Gregory Nutt
b36b29b4c3
SMARTFS: Increase some variables from uint16_t to uint32_t to handle larger device sizes. From Ken Pettit
2014-07-04 07:28:12 -06:00
Gregory Nutt
f881abe2da
Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE was not selected and the SMART sector size was larger than the mtd device's block size (like it would be if using SMARTFS on larger flash devices). From Ken Pettit
2014-07-03 18:14:51 -06:00
Gregory Nutt
f1dcb6674a
Extend erase block size to 18-bits in order (decrease block size to 14-bits) to handle parts with large erase blocks. From Kosma Moczek
2014-06-30 07:52:57 -06:00
Gregory Nutt
c48bd737d0
SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing)
2014-05-13 10:38:46 -06:00
Gregory Nutt
ddf151c226
A fix to the last MB85RS1MT patch
2014-05-12 21:42:06 -06:00
Gregory Nutt
e3373aaf39
Add support for Fujitsu MB85RS1MT part. From Charles Ash
2014-05-12 18:43:06 -06:00
Gregory Nutt
020583efa2
drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn.
2014-04-30 13:31:42 -06:00
Gregory Nutt
d119e4c977
Update TODO list and comments
2014-04-23 13:02:00 -06:00
Gregory Nutt
3a1324741a
More trailing whilespace removal
2014-04-13 14:32:20 -06:00
Gregory Nutt
056aed1274
Make sure that there is one space between while and condition
2014-04-12 13:09:48 -06:00
Gregory Nutt
060b84240b
Add macro UNUSED to eliminate warnings about variables that are set to unused values
2014-03-30 07:58:58 -06:00
Gregory Nutt
6179cdfb91
Eliminate a warning when debug is off
2014-03-26 17:04:13 -06:00
Gregory Nutt
30c34c07cf
Add an MTD driver to wrap another MTD driver and makes is sector size look like 512 bytes
2014-03-24 17:45:45 -06:00
Gregory Nutt
42e06fb503
SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash
2014-03-13 14:07:35 -06:00
Gregory Nutt
91b002a043
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
2014-02-10 18:08:49 -06:00
Gregory Nutt
9f46dac1e2
Add option to indicatet that data is retained in SDRAM
2014-01-28 10:42:49 -06:00
Gregory Nutt
49f73c04ae
Fix a typo that was cloned to several SAMA5 and MTD files
2013-12-21 09:45:27 -06:00
Gregory Nutt
124bd68c6f
Finish A10 Timer register definitions
2013-12-13 11:44:52 -06:00
Gregory Nutt
f97be5131c
Various fixes to the recent, big procfs checkin
2013-12-12 11:08:20 -06:00
Gregory Nutt
e4471dc8e0
procfs/: Extenstive architectural changes and enhancements by Ken Pettit
2013-12-12 09:21:55 -06:00
Gregory Nutt
f821e74ebb
Move smart.h to include/nuttx/fs/smart.h
2013-12-10 09:38:48 -06:00
Gregory Nutt
ed9756c137
MTD NAND: Check if block number is out of ragne at top of loop, not bottom, to avoid some bogus transfers
2013-12-05 18:19:48 -06:00
Gregory Nutt
422b225401
Cosmetic updates to comments and READMEs
2013-12-04 16:41:45 -06:00
Gregory Nutt
ae01f868b2
SAMA5 NAND: Fix some PMECC setup logic
2013-12-04 11:56:56 -06:00
Gregory Nutt
68ccbc0855
Add drivers/mtd/README.txt
2013-12-04 07:46:10 -06:00
Gregory Nutt
37c5113c94
MTD NAND: Fix an error in the calculation of the page number
2013-12-02 17:21:09 -06:00
Gregory Nutt
7847443f5a
MTD NAND: Fix a misplaced endif
2013-12-01 21:06:07 -06:00
Gregory Nutt
c777f90b8a
Costmet updates, naming, debug output, README file
2013-12-01 07:39:20 -06:00
Gregory Nutt
1ea447867a
SAMA5 NAND: Still debugging
2013-11-28 12:21:33 -06:00
Gregory Nutt
a791b1070b
Fix error in SMARTFS partition number reporting
2013-11-28 08:11:13 -06:00
Gregory Nutt
5a18f048ce
Add MTD SST25 driver for larger SST25 parts. From Ken Pettit
2013-11-28 08:04:46 -06:00
Gregory Nutt
881c12cad8
Fixes a couple of errors in MTD NAND logic
2013-11-27 15:02:21 -06:00
Gregory Nutt
5fb0062d2d
SAMA5 NAND: A few bug fixes for integration. Still lots more to do
2013-11-27 11:04:40 -06:00
Gregory Nutt
4483117a60
SAMA5 NAND: Trivial changes
2013-11-25 14:16:04 -06:00
Gregory Nutt
2be17cd41f
SAMA5 NAND: Fix a few race conditions
2013-11-25 13:53:58 -06:00
Gregory Nutt
d1b4f1c466
SAMA5 PMECC: More progress, still not complete
2013-11-24 09:37:59 -06:00