This commit adds function pwm_set_polarity() that setups channel
polarity based on input info from application layer.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
After sevaral resets of the chip after programming, rptun stops working correctly.
Simple test with RPMSG UART causes a lock:
on the netcore:
nsh>cat /dev/ttyproxy
on the appcore:
nsh>echo xxx > /dev/ttyproxy
The problem doesn't occur with NRF53_FLASH_PREFETCH=n
after the follow patch:
commit 9aa57b6c53
Author: wangbowen6 <wangbowen6@xiaomi.com>
Date: Wed Mar 22 11:49:43 2023 +0800
virtio: add virtio framework in NuttX
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
(IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
support mmio transport layer, and the new framwork support
more transport layer and this commit has implemented all the
old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
configs, and update its README.txt;
New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
| | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh | 539Mbps | 524Mbps | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp | 401Mbps | 437Mbps | 583Mbps | 505Mbps |
| rv-virt:netnsh | 487Mbps | 512Mbps | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp | 387Mbps | 455Mbps | 447Mbps | 502Mbps |
| rv-virt:netnsh64 | 602Mbps | 595Mbps | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp | 414Mbps | 515Mbps | 491Mbps | 525Mbps |
| rv-virt:knetnsh64 | 515Mbps | 457Mbps | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp | 308Mbps | 389Mbps | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
Tested in QEMU 7.2.2
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
(1)common/arm_backtrace_unwind.c:528:18: warning: 'ctrl.lr_addr' may be used uninitialized in this function [-Wmaybe-uninitialized]
(2)common/arm_backtrace_unwind.c:626:27: warning: assignment to 'long unsigned int' from 'uint8_t (*)[]' {aka 'unsigned char (*)[]'} makes integer from pointer without a cast [-Wint-conversion]
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
Adding the CONFIG_ARCH_PERF_EVENTS configuration to enable
hardware performance counting，solve the problem that some platform
hardware counting support is not perfect, you can choose to use
software interface.
This is configured using CONFIG_ARCH_PERF_EVENTS, so weak_functions
are removed to prevent confusion
To use hardware performance counting, must:
1. Configure CONFIG_ARCH_PERF_EVENTS, default selection
2. Call up_perf_init for initialization
Signed-off-by: wangming9 <wangming9@xiaomi.com>
The naming of the clang configuration file has changed after version 14
This commit will enable the compatibility with clang-14/15/16/17
Signed-off-by: chao an <anchao@xiaomi.com>
In armv8m the FPSCR[18:16] LTPSIZE field must be set to 0b100 for
"Tail predication not applied" as it's reset value.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
The first time interrupt nesting occurs between REE and TEE,
CURRENT_REGS needs to be set.
If TEE nesting REE breaks, then EXC_RETURN.S=0,EXC_RETURN.ES=1;
Conversely, EXC_RETURN.S=1,EXC_RETURN.ES=0;
Interrupt nesting between TEE and REE can be determined based
on the S and ES bits of EXC_RETURN.
Only once nesting between TEE and REE is supported, and cyclic
nesting between TEE and REE is not supported.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
1、The process stack supports interrupt nesting, Execute in MSP;
2、The interrupt stack supports interrupt nesting;
The thread mode use PSP, and the handle mode use MSP;
3、Adjust arm_doirq、exception_common implementation to meet interrupt nesting
4、Adjust the conditions for returning MSP and PSP;
5、remove setintstack，add arm_initialize_stack;
Signed-off-by: wangming9 <wangming9@xiaomi.com>
For TEE & REE, securefault & busfault are not banked, so the faults can
only forword to TEE/REE.
But how to crash dump the other core which not handled faults ?
Here we provide a way to resolve this problem:
1. Set the securefault & busfault to TEE
2. busfault happend from TEE, then directly dump TEE
3. busfault happend from REE, then generate nonsecurefault
4. Back to REE, and dump
Signed-off-by: ligd <liguiding1@xiaomi.com>
We can use the driver in nuttx to download
files with debugger
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
FlexCAN before used interrupts to process incoming frames.
This patch adds a HPWORK workqueue to process incoming frames in the workqueue
context instead. Also renamed mbi to txmb for better readability.
* Error handling for abnormal interrupts and DMA errors is now
enabled for all builds, regardless of any DEBUG configuration.
* Error handling resets the MAC for the specific errors that
may halt the Ethernet operation, instead of everything as it
was before.
When supporting high-priority interrupts, updating the
g_running_tasks within a high-priority interrupt may be
cause problems. The g_running_tasks should only be updated
when it is determined that a task context switch has occurred.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
stack_t used by sigaltstack, make it compile sucess in sim.
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
ltp: fix compile errors
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
If the cache is already enabled before NuttX starts up,
enabling the cache in NuttX will cause the cache to be
re-invalidated, then resulting in data that is already
in the cache being flushed out.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
1. add lib_fork api in libs/libc, we need a fork() api to implement the
fork relative method, such as pthread_atfork
2. rename the assembly fork entry function name to up_fork(), and rename
the up_fork() to arch specific name, such as
sim_fork()/arm_fork()/mips_fork() etc.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
The implementation of up_perf_*() is in a different static library in nuttx:
Hardware: libarch.a
Software: libdrivers.a (weak function)
Since functions with weak attributes cannot be correctly replaced in multiple static libraries,
this PR will use macros to replace whether the arch supports hardware perf events
Signed-off-by: chao an <anchao@xiaomi.com>
If -fstack-protector-all is enabled, gcc linker will need GCC
SSP(Stack Smashing Protector) support, Since the implement of SSP
is related to the OS, most of embedded toolchain does not provide
ssp support, so an error will be reported when linking:
enable CONFIG_LTO_FULL && CONFIG_STACK_CANARIES
arm-none-eabi/bin/ld: cannot find -lssp_nonshared: No such file or directory
arm-none-eabi/bin/ld: cannot find -lssp: No such file or directory
https://github.com/gcc-mirror/gcc/blob/master/gcc/gcc.cc#L983-L985
Since nuttx has already implemented SSP related hook functions,
so in this PR, we filter out this option in the link phase to ensure that
the implementation of lssp/lssp_nonshared will not be referenced
Signed-off-by: chao an <anchao@xiaomi.com>
According to the ARMv7a/r/m and ARMv8m architecture manuals
The allowed values are
0 Data or unified cache.
1 Instruction cache.
"One CCSIDR is implemented for each cache that can be accessed by the processor. CSSELR selects which Cache Size ID Register is accessible, see c0, Cache Size Selection Register (CSSELR)."
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Remove TABs
Fix indentation
Fix Multi-line comments
Fix Comments to the Right of Statements.
Fix nuttx coding style
Fix Comments to the Right of Statements.
1. as we can use fork to implement vfork, so we rename the vfork to
fork, and use the fork method as the base to implement vfork method
2. create the vfork function as a libc function based on fork
function
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
