sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
33,849 Commits 1 Branch 0 Tags 291 MiB
7d813fb6d3
Commit Graph

1364 Commits

Author SHA1 Message Date
Gregory Nutt
ceacacbc63 vfork(): Fix a race condition in the SMP case. Existing logic depended on the fact that the child would not run until waitpid was called because the child had the same priority as the parent. BUT in the SMP case that is not true... the child may run immediately on a different CPU. 2016-11-19 07:30:01 -06:00
Gregory Nutt
69e9f8638d Most interrupt handling logic interacts with tasks via standard mechanism such as sem_post, sigqueue, mq_send, etc. This all call enter_critical_section and are assumed to be safe in the SMP case. 
But certain logic interacts with tasks in different ways.  The only one that comes to mind are wdogs.  There is a tasking interface that to manipulate wdogs, and a different interface in the timer interrupt handling logic to manage wdog expirations.

In the normal case, this is fine.  Since the tasking level code calls enter_critical_section, interrupts are disabled an no conflicts can occur.  But that may not be the case in the SMP case.  Most architectures do not permit disabling interrupts on other CPUs so enter_critical_section must work differently:  Locks are required to protect code.

So this change adds locking (via enter_critical section) to wdog expiration logic for the the case if the SMP configuration.
 2016-11-18 13:57:30 -06:00
Gregory Nutt
78fd358023 Update some comments. 2016-11-18 08:20:52 -06:00
Gregory Nutt
8602e8a8a9 SMP: irq_csection() has a bad assumption. It assumed that the state of certain variables. That was true on entry into the interrupt handler, but might change to the execution of logic within the interrupt handler. 2016-11-18 07:38:16 -06:00
Gregory Nutt
8e029f019b Update comments 2016-11-17 17:30:12 -06:00
Gregory Nutt
47b52a2633 Fix an error in manually bringing in Sebastien's changes; Update some comments. 2016-11-17 16:15:06 -06:00
Gregory Nutt
9acd57c819 Fix up some naming and update some comments. 2016-11-17 15:50:39 -06:00
Gregory Nutt
558f4049d4 sched/irq/irq_csection: Fix a bad DEBUG assertion when SMP is enabled. 2016-11-17 15:36:27 -06:00
Gregory Nutt
2c314464a8 Fix a typo in a comment 2016-11-17 08:03:45 -06:00
Gregory Nutt
ccdc11d8ff Fix typo in variable naming. g_cpu_irqset should be g_cpu_irqlock. 2016-11-17 06:37:24 -06:00
Gregory Nutt
1c1564f0c1 Add logic to handled nested calls to enter_critical_section() from interrupts handlers (with SMP). 2016-11-16 22:45:08 -06:00
Gregory Nutt
0c3207e86e Fix backward logic in an assertion. 2016-11-16 21:48:27 -06:00
Gregory Nutt
16f0b8fa96 Fix typos in DEBUASSERT statements 2016-11-16 19:58:51 -06:00
Gregory Nutt
f1e4951a8d Fix some comments 2016-11-16 19:11:31 -06:00
Gregory Nutt
4ca653a1cc Add some experimental changes to enter/leave_critical_section to deal with the case where interrupts are disabled only on the local CPU 2016-11-16 18:28:35 -06:00
Gregory Nutt
5ce3b399d5 Correct some typos in comments 2016-11-15 16:48:40 -06:00
Gregory Nutt
40d7216a22 Back out 65ab12 and parts of 21f92b 2016-11-15 15:44:43 -06:00
Gregory Nutt
6683f01444 Trivial change to comment 2016-11-15 13:38:43 -06:00
Gregory Nutt
21f92ba601 Review some SMP logic; update comments; refresh configuration. 2016-11-15 09:24:00 -06:00
Gregory Nutt
65ab12fbb9 If SMP is enabled, if any interrupt handler calls enter_critical_section(), it should take the spinlock. 2016-11-15 08:37:58 -06:00
Gregory Nutt
b53866c872 sched/irq: Change order for SMP case in enter_critical_section: Disble local interrupts BEFORE taking spinlock. 2016-11-15 07:54:18 -06:00
Freddie Chopin
484a1b6104 sem_wait() and sem_trywait() no longer modify the errno value UNLESS an error occurs. This allows these functions to be used internallly without clobbering the errno value. 2016-11-09 07:01:49 -06:00
Gregory Nutt
120d29b480 Update some Kconfig comments 2016-11-06 09:06:37 -06:00
Heesub Shin
8e94d8e7cc Signal sent from work_signal() may interrupt the low priority worker thread that is already running. For example, the worker thread that is waiting for a semaphore could be woken up by the signal and break any synchronization assumption as a result. It also does not make any sense to send signal if it is already running and busy. This commit fixes it. 2016-11-06 08:00:12 -06:00
Gregory Nutt
796969f6b6 Update TODO. Provide do-nothing stubs for mutex attribute interfaces if features not enabled. pthread_cond includes a signaling semaphore and should call sem_setprotocol. 2016-11-05 11:06:52 -06:00
Gregory Nutt
6f1c5e7b43 Add some comments. 2016-11-05 09:44:29 -06:00
Gregory Nutt
4b0372e542 Missing # on endif 2016-11-03 21:27:52 -06:00
Gregory Nutt
73fc186beb sem_setprotocol: Handle a case of missing proxy for sem_setprotocol. Reorder so that (1) this error is avoided, and (2) >No proxy is needed if priority inheritance is not enabled. 2016-11-03 18:51:38 -06:00
Gregory Nutt
0d5bd30943 Fix a type in include file name 2016-11-03 12:58:02 -06:00
Gregory Nutt
4c8ec0d2ca include/nuttx/semaphore.h: Fix broken macros 2016-11-03 12:49:44 -06:00
Gregory Nutt
1da3a5fa61 sched: Disable priority inheritance on all semaphores used for signaling 2016-11-03 12:42:02 -06:00
Gregory Nutt
97bf82ee05 Semaphores: Provide macros for sem_setprotobol() and sem_getprotocol() if priority inheritance is not enabled. More SEM_PRIO_* definitions to include/nuttx/semaphore.h 2016-11-02 18:21:46 -06:00
Gregory Nutt
d5b4d848d3 Move protoypes for the non-standard include/semaphore.h file to the non-standard include/nuttx/semaphore.h with the other non-standard semaphore interfaces. 2016-11-02 14:43:03 -06:00
Gregory Nutt
b738a646ad sem_getprotocol() can be in C library 2016-11-02 09:29:16 -06:00
Gregory Nutt
92d3022411 Add pthread_mutexattr_get/set_protocol and non-standard sem_get/set_protocol. These may use to enable or disable priority inheritance on a single semaphore. 2016-11-02 09:05:18 -06:00
Gregory Nutt
4997ec7a1e ESP32 Core V2: Add an SMP configuration to support development (not yet usable). 2016-10-29 14:56:07 -06:00
Gregory Nutt
e6377641a8 sched/Kconfig: Add ranges to START_YEAR, MONTH, and DAY 2016-10-27 18:04:14 -06:00
Gregory Nutt
123c520db4 Correct time initialization for the case where time is initialized from settings in the .config file. The correct range for month (tm_mon) internally is 0-11, not 1-12 as it is in the .config file. 2016-10-27 08:36:24 -06:00
Gregory Nutt
6a20560ba2 Trivia fix to typo in comment 2016-10-26 12:29:36 -06:00
Gregory Nutt
3e13ed2400 Within the OS, when a thread obtains a semaphore count it must call sem_addholder() if CONFIG_PRIORITY_INHERITANCE is enabled. If a count is available, then sem_wait() calls sem_addholder(), otherwise it waited for the semaphore and called sem_addholder() when it eventually received the count. 
This caused a problem when the thread calling sem_wait() was very low priority.  When it received the count, there may be higher priority threads "hogging" the CPU that prevent the lower priority task from running and, as a result, the sem_addholder() may be delayed indefinitely.

The fix was to have sem_post() call sem_addholder() just before restarting the thread waiting for the semaphore count.

This problem was noted by Benix Vincent who also suggested the solution.
 2016-10-26 07:23:15 -06:00
Gregory Nutt
8669183852 sched/pthread and task: When a pthread is started, there is a small bit of logic that will run on the thread of execution of the new pthread. In the case where the new pthread has a lower priority than the parent thread, then this could cause both the parent thread and the new pthread to be blocked at the priority of the lower priority pthread (assuming that CONFIG_PRIORITY_INHERITANCE is not selected). 
This change temporarily boosts the priority of the new pthread to at least the priority of the new pthread to at least the priority of the parent thread.  When that bit of logic has executed on the thread of execution of the new pthread, it will then drop to the correct priority (if necessary) before calling into the new pthread's entry point.
 2016-10-01 11:38:22 -06:00
Gregory Nutt
75104b0808 Remove duplicate function prototype from wrong header file 2016-10-01 10:56:42 -06:00
Sagitta Li
9fa1024eef vector table should have dimension NR_IRQS, not NR_IRQS+1 2016-09-22 07:56:12 -06:00
Gregory Nutt
f0b4705d57 Correct a comment 2016-09-15 13:10:42 -06:00
Gregory Nutt
e3bbfa2d85 mq_send() was not setting the errno value on certain failures to allocate a message 2016-09-15 12:42:24 -06:00
Gregory Nutt
368f241637 Correct some comments 2016-09-15 08:46:41 -06:00
Gregory Nutt
952268274a sched/: Fix misplaced right bracket; remove redundant assertion. 2016-09-06 12:27:12 -06:00
Gregory Nutt
7582c2344c sched/: Eliminate calculation of a possibly unused value. 2016-09-06 10:28:19 -06:00
Gregory Nutt
e034c78516 improve some assertions; add some comments. 2016-09-06 10:21:41 -06:00
Gregory Nutt
27919549f1 sched/: Simplify some child/parent logic 2016-09-06 08:40:55 -06:00
Gregory Nutt
05aa586aa6 sched/: Move fields related to parent/child task relationship out of TCB into group structure. 2016-09-06 08:28:31 -06:00
Gregory Nutt
858af4295c The TCB nchildren field should not be incremented when pthreads are created. 2016-09-06 07:34:36 -06:00
Gregory Nutt
60b70f7dbb Make xorshift128 re-entrant so that we do do have to suffer the overhad of serialization controls. 2016-08-21 07:47:53 -06:00
Gregory Nutt
53b2de18eb Trivial typo fix 2016-08-20 13:23:41 -06:00
Gregory Nutt
300361539a sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured. 2016-08-20 12:47:07 -06:00
Gregory Nutt
6f833be9d5 Separate XorShift128 PRNG from /dev/urandom and make it generally available. 2016-08-20 11:36:02 -06:00
Gregory Nutt
5ea77118aa Explicitly initialize the group tg_exitsem with sem_init(). The existing logic worked because the correct initialization value is all zero, but it is better to initialize the semaphore explicitly. Noted by Jouko Holopainen. 2016-08-10 07:38:07 -06:00
Gregory Nutt
3404b3cb4a sched/: Review and correct some stylistic inconsistencies 2016-08-07 08:32:11 -06:00
Gregory Nutt
18ce4ff57b sched/: Review and correct some stylistic inconsistencies 2016-08-07 08:25:30 -06:00
Gregory Nutt
94d34bba47 Fix a typo in a Make.defs file 2016-07-28 09:46:28 -06:00
Gregory Nutt
309480d0f9 Merge branch 'timekeeping' of bitbucket.org:nuttx/nuttx 2016-07-28 09:34:00 -06:00
Gregory Nutt
7370d3171a Move include/nuttx/lib.h to include/nuttx/lib/lib.h 2016-07-21 14:05:44 -06:00
Gregory Nutt
246773faa7 Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name. 2016-07-11 06:54:02 -06:00
Gregory Nutt
f47b69e1f0 Add support for adjtime system call 2016-07-10 16:55:32 -06:00
Gregory Nutt
c326b6320a Add description of adjtime() from Linux man page 2016-07-10 16:47:06 -06:00
Max Neklyudov
8db29071da timekeeping: initial implementation 2016-07-10 16:14:25 -06:00
Gregory Nutt
830af912a1 Add sig_raise() 2016-07-04 09:32:36 -06:00
Paul A. Patience
891113dac9 sched/semaphore: Fix setting EINVAL in sem_post() and sem_wait() 2016-06-28 10:15:52 -04:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
f4c47636e7 SYSLOG: Debug output from the IDLE task should be forced like interrupt level output 2016-06-20 07:35:38 -06:00
Gregory Nutt
3fa41c0f18 Kconfig files: Fix some dependencies that have CONFIG_ in the variable name 2016-06-17 19:30:19 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
f3ec664f63 Debug output level (error, warning, info) is now selectable on a per-subsystem, per-driver basis 2016-06-12 13:08:23 -06:00
Gregory Nutt
13cac3b592 sched/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 16:42:42 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
86b79b33cf Reserver the name 'err' for other purposes 2016-06-11 14:40:07 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
80d0b2736e Reorder some logic: (1) set initial CPU IDLE task regsters AFTER allocating stack, (2) invalidate cache in CPU start-up BEFORE handling first interrupt. 2016-05-22 15:01:49 -06:00
Gregory Nutt
07acd5327a SMP: Clean CPU0 D-Cache before starting new CPU; Invalidate D-Cache when new CPU started. 2016-05-20 12:39:02 -06:00
Gregory Nutt
32838fcc2c enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized 2016-05-18 09:17:01 -06:00
Gregory Nutt
3d87005e5a Fix some compilation issues when certain combinations of debug options are selected. 2016-05-17 12:06:32 -06:00
Gregory Nutt
faca2fb1e7 ARMv7-A/i.MX6: Add logic to handle allocation of CPU IDLE thread stacks more efficiently 2016-05-13 11:39:42 -06:00
Gregory Nutt
70782b0f14 ARMv7-A i.MX6: More SMP logic. Still untested. 2016-05-12 15:04:46 -06:00
Gregory Nutt
c00e3e55dc Fix several places in DMA logic where a spurious semicolon causes bad conditional logic 2016-05-11 17:42:59 -06:00
Gregory Nutt
6cfe56202d Backout 3f731241cb. It is a good idea, but has some unpleasant side effect... like SYSLOG and dbg() no longer work 2016-04-18 18:55:36 -06:00
Gregory Nutt
3f731241cb fs/inode/, fs/vfs/, and sched/task/: File and socket descriptors are no longer allocated for kernel threads. They must use SYSLOG for output and the low-level psock interfaces for network I/O. This saves a little memory which might be important for small footprint configurations. 2016-04-14 10:14:38 -06:00
Gregory Nutt
3fba968bb0 Fix an error when a task with open message queue descriptors is killed via task_delete(). Noted by Anton Gropyanov. 2016-04-11 11:14:18 -06:00
Gregory Nutt
e42b3040ee Fix some issues with the initial implementation of sched_mergeprioritized. 2016-03-24 07:52:27 -06:00
Gregory Nutt
b5afc187ee Add file missed in last commit; sched_lock() and sched_mergepending() now use sched_mergeprioritized() 2016-03-23 08:58:48 -06:00
Gregory Nutt
4a962a36dd Add library functions to concatenate and move lists. Add scheduler function to merge prioritized function to merge prioritized lists (not yet used). 2016-03-23 08:00:58 -06:00
Gregory Nutt
f0671bae2f SMP: Reorder some logic related to task exit() and restart() for logic of SMP. 2016-03-22 18:19:57 -06:00
Gregory Nutt
9604ea8f42 SMP: Straighten up some scheduler locking logic -- need to REVISIT 2016-03-22 13:01:47 -06:00
Gregory Nutt
3b2e94e1fd SMP: Fix some errors when removing a trask from the assigned task list 2016-03-22 11:08:30 -06:00
linfei_chen
4b18b8d1e3 LP Work Queue: Fix test to find and idle worker thread. 2016-03-22 08:15:49 -06:00
Gregory Nutt
bc325bd597 Update Kconfig comments 2016-03-21 18:28:43 -06:00
Gregory Nutt
d20db82fcb Scheduler instrumentation: Fix some associated with monitoring critical sections 2016-03-21 17:08:07 -06:00
Gregory Nutt
adf3c73219 scheduler instrumentation: Improvements to buffering logic 2016-03-21 15:40:01 -06:00
Gregory Nutt
ccbf514233 Add task state to information recorded when a task is suspended 2016-03-21 15:24:15 -06:00
Gregory Nutt
f7b58e9dfd sched/: Move location (and form) of context switch instrumentation. 2016-03-21 14:08:31 -06:00
Gregory Nutt
242f8ff25f drivers/syslog/note_driver.c: Add a driver that will allow an application to read buffered scheduler instrumentation data 2016-03-17 14:46:00 -06:00
Gregory Nutt
7f19631338 sched/: Add option to buffer scheduler instrumentation data in memory. 2016-03-17 09:49:43 -06:00
Gregory Nutt
2225940155 SMP: Add per-CPU initialization logic 2016-03-13 07:16:56 -06:00
Gregory Nutt
79c1fa5bd7 SMP: Simplified SMP interfaces 2016-03-12 15:29:33 -06:00
Gregory Nutt
320b70ebad Update submodules 2016-03-12 13:24:38 -06:00
Gregory Nutt
24468128de TLS: Simplify 2016-03-11 07:17:32 -06:00
Gregory Nutt
934069e422 TLS: Add logic to get/set arbitrary TLS values 2016-03-10 19:31:22 -06:00
Gregory Nutt
30b6ee96c9 Add basic definitions for TLS support 2016-03-10 11:56:33 -06:00
Gregory Nutt
9b5e88af71 Update some comments 2016-03-06 13:50:26 -06:00
Gregory Nutt
5d63cd85c7 sched/semaphore: Add an internal interface to reset a semaphore count. 2016-03-05 07:33:24 -06:00
Gregory Nutt
d0c09771db sched: Recent change of ASSERT to DEBUGASSERT causes a crash when debug is diabled because there is a critical function call within the assertion 2016-02-23 10:27:40 -06:00
Gregory Nutt
7cb35587a3 Correct minor typos in a Kconfig file 2016-02-22 08:28:33 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
143d287f11 Fix some missing header file inclusions and a misplaced semi-colon from recent commits 2016-02-21 11:27:55 -06:00
Gregory Nutt
c929db42f9 Fix some bad SMP logic in sched_removereadytorun.c 2016-02-20 08:07:54 -06:00
Gregory Nutt
883a1adfe2 Implement sched_setaffinity() and sched_getaffinity() 2016-02-19 19:18:54 -06:00
Gregory Nutt
5a590e99b9 Add SYSCALLS for pthread_setaffinity() and pthread_getaffinity() 2016-02-19 18:13:06 -06:00
Gregory Nutt
1b5e296cf2 Add pthread_setaffinity() and pthread_getaffinity() 2016-02-19 17:59:19 -06:00
Gregory Nutt
a633353ec3 Add a CPU affinity set to the TCB if SMP is enable and use this CPU set as a mask for determining which CPUs the thread may run on. Add an affinity field to the attrributes to permit controlling which CPUs a pthread may run on. Implements pthread_att_setaffinity_np() and pthread_attr_getaffinity_np(). 2016-02-19 17:33:35 -06:00
Gregory Nutt
72d3920295 Rename cpuset_t to cpu_set_t which is the type used in some non-standard Linux/GNU interfaces. Move definitions of cpu_set_t to include/sys/types.h. Add prototypes for sched_setaffinity(), sched_getaffinity(), pthread_attr_setaffinity_np(), pthread_attr_getaffinity_np(), pthread_setaffinity_np(), and pthread_getaffinity_np(). No implementation is yet in place. 2016-02-19 15:57:07 -06:00
Gregory Nutt
3994b094c5 Remove some empty C file section comments; Update some text in TODO file 2016-02-19 10:01:15 -06:00
Gregory Nutt
94bea6547b Fix two unterminated strings in Kconfig files 2016-02-18 17:13:03 -06:00
Gregory Nutt
6d97249348 Trivial, cosmetic changes 2016-02-18 14:56:48 -06:00
Gregory Nutt
1780000777 SMP: Setting bit for wrong CPU. Assertion has cause false alarm crashes.. 2016-02-18 12:31:21 -06:00
Gregory Nutt
7d9287958f Minor simplication to last commit; Update TODO list 2016-02-18 09:21:43 -06:00
Gregory Nutt
52fbbaf778 1. SMP: Fix an assertion. SMP-specific change accidentally made in non-SMP code 
2. Move list of signal actions from the task TCB to the task group.  Signal handlers are a property of the entire task group and not of individual threads in the group.  I know, I preferred it the other way too but this is more compliant with POSIX.
 2016-02-18 08:34:54 -06:00
Gregory Nutt
720343612b Remove some empty file section section header comments 2016-02-17 18:05:03 -06:00
Gregory Nutt
6543c570d4 Remove some empty file section section header comments 2016-02-17 17:38:39 -06:00
Gregory Nutt
970b34ae8f Remove some empty file section section header comments 2016-02-17 17:17:44 -06:00
Gregory Nutt
a20863f6c0 Remove some empty file section section header comments 2016-02-17 17:15:08 -06:00
Gregory Nutt
b71907888e Remove some empty file section section header comments 2016-02-17 17:04:51 -06:00
Gregory Nutt
269c242f7b Update TODO list 2016-02-17 16:51:58 -06:00
Gregory Nutt
95735519dd SMP: Cosmetic renaming to clarify functionality of SMP interfaces. Update comments. 2016-02-17 13:36:25 -06:00
Gregory Nutt
b50325bb38 SMP: Add funtions to perform atomic bit set/clear operations; fix two errors in SMP macros 2016-02-17 13:20:01 -06:00
Gregory Nutt
8ac12839c3 leave_critical_section: Fix text of whether spinlock should be released or not 2016-02-17 10:55:18 -06:00
Gregory Nutt
d6912d0b00 Fix some bad conditional compilation and other typos in last commit 2016-02-16 20:11:25 -06:00
Gregory Nutt
6aeb4a52e8 Performance improvement: Idle loop should not take MM semaphore if there is not garbage to be collected. This can cause loss of performance and thrashing in tasking 2016-02-16 19:33:22 -06:00
Gregory Nutt
6dfa72d038 SMP: Fix some dumb but difficult to debug errors 2016-02-16 16:43:19 -06:00
Gregory Nutt
384e51cb05 Add some additional schedule instrumentation 2016-02-16 15:21:45 -06:00
Gregory Nutt
7f18b515f4 SMP: Fix a typo in last commit 2016-02-16 10:40:25 -06:00
Gregory Nutt
a442245479 SMP: Fix some non-SMP errors that crept in; fix a recursion problem; re-partition some functionality to improve design and readability 2016-02-16 10:14:33 -06:00
Gregory Nutt
8774e7a4a0 SMP: Fix missing initialization value 2016-02-15 18:35:05 -06:00
Gregory Nutt
fccef49305 Cosmetic changes to comments 2016-02-15 13:48:08 -06:00
Gregory Nutt
cfcd98ca89 SMP: Used wrong point to wrong TCB 2016-02-15 11:45:34 -06:00
Gregory Nutt
fc842d740a SMP: os_start needs to hold the KMM semaphore to prevent threads from allocating memory until the bring-up is complete 2016-02-15 11:07:42 -06:00
Gregory Nutt
8ea1bc3188 SMP: Fix backward spinlock test 2016-02-15 11:06:54 -06:00
Gregory Nutt
8399938138 SMP: I think we have to spinlock before we are possibly suspended 2016-02-15 10:15:07 -06:00
Gregory Nutt
3c46fa3f9f Fix a contention problem in the previous critical section design 2016-02-15 08:50:20 -06:00
Gregory Nutt
c7df82147f SMP: First cut integration of enter/leave_critical_section and the scheduler. There are some issues. 2016-02-15 08:06:17 -06:00
Gregory Nutt
9cb2a6b1f9 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:19:15 -06:00
Gregory Nutt
e6bd3544f6 Fix a name collision introduced in last commit 2016-02-14 08:20:35 -06:00
Gregory Nutt
6e3107650d nuttx/sched: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 08:17:46 -06:00
Gregory Nutt
a604a86980 Fix an error introduced in a previous commit 2016-02-13 10:48:30 -06:00
Gregory Nutt
d017e3eb2e SMP: Forgot to add a file before the last commit 2016-02-13 10:25:36 -06:00
Gregory Nutt
97cbd7112f SMP: Implement enter/leave_critical_section 2016-02-13 10:23:16 -06:00
Gregory Nutt
8ac699b63d SMP: Need to perform all IDLE task memory allocations on initializatin thread prior to starting the other CPUs 2016-02-13 09:04:54 -06:00
Gregory Nutt
f45166af32 SMP: Fix a IDLE task semaphore operation 2016-02-12 18:03:08 -06:00
Gregory Nutt
3f7f58de9d SMP: Fix some debug assertion problems when DEBUG is enabled; Partial fix for one bring-up issue 2016-02-12 17:13:38 -06:00
Gregory Nutt
64b3ce8775 SMP: Add up_cpustart and up_cpurestart protoypes; fix some problems in sched_addreadytorun; first cut at SMP version of up_mergepending. 2016-02-12 16:13:14 -06:00
Gregory Nutt
85f663a8ee SMP: Add non-reentrant spinlocks, fix pre-emption controls with SMP, and most of the basic scheduler support for SMP (still missing a few things) 2016-02-12 14:55:31 -06:00
Gregory Nutt
7d7f4e140c OS: Add a RUNNABLE attribute to the tasklists to indicate if the task list includes the currently executing task. Use this additional bit of information to determine if a context switch could really occur when removing a TCB from a task list 2016-02-12 08:15:16 -06:00
Gregory Nutt
76e88c8963 SMP: Removed unused macros, update comments, update sched_removereadytorun for SMP 2016-02-11 17:24:19 -06:00
Gregory Nutt
c315479a04 SMP: Move IDLE thread init logic from sim to OS; need to assign unique IDs to each IDLE task 2016-02-11 14:11:26 -06:00
Gregory Nutt
ddbc948895 SMP: Minor SMP-related clean-up/improvements 2016-02-11 12:18:54 -06:00
Gregory Nutt
49227fa554 Scheduler: Replace the boolean 'prioritized' with a uint8_t bit set so that additional attributes of a list can be specified without adding more boolean values. 2016-02-11 08:06:33 -06:00
Gregory Nutt
0a7e136a5a SMP: Idle thread must be assigned to a CPU 2016-02-11 08:01:09 -06:00
Gregory Nutt
89bea6917c Kconfig: Architecture must indicate that it support multiple CPUs in order to enable SMP 2016-02-10 17:31:16 -06:00
Gregory Nutt
292d2fe648 Correct naming of a TCB flag; update some comments 2016-02-10 16:53:34 -06:00
Gregory Nutt
96223cedf1 SMP: A little more 2016-02-10 15:43:05 -06:00
Gregory Nutt
3147dfc7d5 SMP: Add some tentative initialization logic 2016-02-10 13:49:27 -06:00
Gregory Nutt
47a5663f8c SMP: A few preliminary data structure definitions 2016-02-10 11:45:26 -06:00
Gregory Nutt
f5a3b1e89d Add EXPERIMENTAL configuration option to investigate some SMP issues 2016-02-10 10:27:48 -06:00
Gregory Nutt
bf8120d51d Fix some odd logic in CC3000 semaphore handling. Noted by Vladimir Komendantskiy 2016-02-10 09:50:28 -06:00
Gregory Nutt
2c0ad2564f Add CONFIG_SPINLOCK. Also need spinunlock() and spinlock_initialize() 2016-02-09 15:31:14 -06:00
Gregory Nutt
74db48202e sched/: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 17:44:41 -06:00
Gregory Nutt
2dc258986d Add a state variable that provides the current level of OS initialization. This is needed by some logic that may attempt to run early in the start-up sequence, but cannot run if a sufficient level of initializaitn has not not yet occurred 2016-02-05 08:34:03 -06:00
Gregory Nutt
61819c0e3e Fix a typo in last commit that was not noticed until CONFIG_SIG_EVTHREAD was enabled 2016-01-28 16:50:20 -06:00
Gregory Nutt
da5115e3e6 Correct an error in timer_created intoduced when SIGEV_THREAD support was added. 2016-01-28 16:38:54 -06:00
=?UTF-8?Q?Manuel_St=c3=bchn?=
2bacc40350 Fix mismatched prototype error in work_queue() 2016-01-24 12:48:24 -06:00
Gregory Nutt
84d4cb007b clock_systimer: 64-bit timer accesses are not atomic. Noted by Freddie Chopin. 2016-01-22 12:24:36 -06:00
Gregory Nutt
2de5be34e5 Update ChangeLog 2016-01-21 19:29:43 -06:00
Gregory Nutt
032ad1b70b Remove clock_systimer32 and clock_systimer64. There is now only clock_systimer 2016-01-21 16:49:24 -06:00
Gregory Nutt
b04e2ea021 Trivial improvement to comments 2016-01-21 16:28:36 -06:00
Gregory Nutt
a4f5254cbe Fix a typo introduced into the last commit 2016-01-21 13:48:35 -06:00
Gregory Nutt
e001f37593 sched/clock/clock_timespec.c: Fix an error in the time conversion 2016-01-21 13:31:00 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
8ee75a96fe Update TODO list and Kconfig help 2016-01-13 07:44:44 -06:00
Dimitry Kloper
b48ca00cd5 The delay parameter has 'int' type while explicit int32_t is used in sigtimedwait() (sig_timedwait.c) This can lead to wrong argument for systems that have default int size different than int32 (namely AVR). 2016-01-05 07:58:04 -06:00
Gregory Nutt
c1fff4706c signals: Adds a very limited, minimal implementation for SIGEV_THREAD 2015-12-30 15:01:14 -06:00
Gregory Nutt
849df03d22 Update dates on files modified for SIGEV_THREAD support 2015-12-30 13:28:39 -06:00
Gregory Nutt
9835eeb181 signals: Basic framework to support SIGEV_THREAD 2015-12-30 13:20:31 -06:00
Gregory Nutt
198cfd0224 Forgot to add a file needed in the last commit 2015-12-22 12:06:05 -06:00
Gregory Nutt
b90da3f27b waitpid: CRITICAL BUGFIX. Add a reference counting mechansim to prevent wait from using stale memory that was freed by the exiting task 2015-12-22 11:48:17 -06:00
Gregory Nutt
8f540fd81a Trivial fix to typo in a comment 2015-12-21 22:24:43 -06:00
Gregory Nutt
a2e1ece873 RTC: Handle RTC failures. If mktime is called with garbage, it may crash 2015-12-21 14:39:40 -06:00
Gregory Nutt
e8d0f85c8b Modules: Add mod_setsymtab to set global symtol table once. Now we can remove symbol table parameters from the insmod call. This will make implementing an NSH insmod command much easier 2015-12-13 08:10:01 -06:00
Gregory Nutt
076f382f79 Module: Remove some unused members of a structure 2015-12-13 06:48:30 -06:00
Gregory Nutt
917dbc8540 modules: Add more information to registry just for procfs 2015-12-12 18:56:32 -06:00
Gregory Nutt
795ddd7e80 OS modules: Add basic procfs support. A module registry that will eventually be used to support lsmod 2015-12-12 17:42:25 -06:00
Gregory Nutt
a908a61c5a Various module-related cosmetic changes 2015-12-12 12:55:50 -06:00
Gregory Nutt
303123deb9 Add syscall support for insmod and rmmod 2015-12-12 11:11:09 -06:00
Gregory Nutt
040835de00 Add an implementation of rmmod 2015-12-12 10:51:54 -06:00
Gregory Nutt
9ef33d8ebc Merge remote-tracking branch 'origin/master' into module 2015-12-12 09:38:44 -06:00
Gregory Nutt
0efcb5445b Fix compile error when cache coherency logic is enabled 2015-12-12 09:38:06 -06:00
Gregory Nutt
49554fe4fc Move module support from binfmt/ to sched/ so that it can be configured and built independently from binfmt features 2015-12-12 07:09:17 -06:00
Gregory Nutt
f45e2a247e Cosmetic fix to comment 2015-12-11 10:06:40 -06:00
Gregory Nutt
c9925305b5 Same important bug as c623af03a0ee8ac041fc22051781047d6cb9cc75, but in a different location 2015-12-09 10:17:33 -06:00
Gregory Nutt
c16648b3fd Most cosmetic but also includes a fix for a compile problem from Ken Pettit 2015-12-01 12:54:57 -06:00
Gregory Nutt
48da5aa496 sched/pthread/: CRITICAL BUGFIX: Logic was wiping out the indication that of the type of a pthread. Hence, it could be confused as a task. Found because this was causing a crash when /proc/nnn/cmdline was printed. 2015-11-28 10:05:36 -06:00
Gregory Nutt
4b29bcee7f Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces 2015-11-20 08:27:52 -06:00
Gregory Nutt
892ba4f26a DS1307: Change year bias to 1968 which is a leap year juse like 2000 2015-11-19 15:12:40 -06:00
Gregory Nutt
c34b5108a7 RTC: Fix system time initialization when using an exernal RTC. Fix some bugs in the DS1307/DS3231 RTC driver 2015-11-19 14:54:30 -06:00
Lok
da8950fe5b Fix an error in clock_timespec_subtract 2015-11-03 07:28:46 -06:00
Gregory Nutt
78ae661223 One more trivial spacing issue 2015-10-07 20:13:49 -06:00
Gregory Nutt
79d554939e sched/: Fix some spacing issues 2015-10-07 19:59:14 -06:00
Gregory Nutt
af086c40ff Remove dangling whitespace 2015-10-04 15:28:54 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
16b32bbadd Standardize the width of all comment boxes in C files 2015-10-03 07:25:53 -06:00
Gregory Nutt
0f90500f72 Standardize the width of all comment boxes in header files 2015-10-02 17:48:24 -06:00
Gregory Nutt
5b51a9fcdd Standardize the width of all comment boxes in C files 2015-10-02 17:43:18 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
a813baef0a User workqueue, cosmetic changes 2015-09-30 14:03:55 -06:00
Gregory Nutt
4cd57e1e4e Work queues: Logic that sets the queued indication and the logic that does the actual queuing must be atomic 2015-09-30 11:04:29 -06:00
Paul A. Patience
9f108b7b63 Fix issues detected by clang 2015-09-10 20:59:43 -04:00
Gregory Nutt
cb2f84e288 Loosen up restriction a little in sched_ufree() 2015-09-07 15:28:58 -06:00
Gregory Nutt
d78d3ef4ab Logic for delayed memory garbage collection for the case of user space memory will not work as implemented for the case of the kernel build. That is because the correct context is in place in order to free the user memory when sched_kufree is called, but will not be in place later when the memory garbage collection runs. If this feature is really needed, then some more substantial redesign is required 2015-09-07 14:40:18 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Gregory Nutt
0b2fbd7a2c Fix a DEBUGASSERTion 2015-08-21 12:33:14 -06:00
Gregory Nutt
89b5ef8d35 wdogs: Fix counting of free, pre-allocated wdog timers. The could could get decremented below zero in some situations 2015-08-21 11:30:22 -06:00
Gregory Nutt
51f386d08a Fix more common typos 2015-08-16 11:07:23 -06:00
Gregory Nutt
768d892188 Add si_errno to siginfo_t 2015-08-14 10:10:32 -06:00
Sebastien Lorquet
89c81f6c08 FIX typo in DEBUASSERTion 2015-08-03 09:14:15 -06:00
Gregory Nutt
15db2a45a4 drivers/net/slip.c: Fix another compilation error 2015-08-02 07:20:36 -06:00
Gregory Nutt
3a109315ed Fix a logic error in last change to sem_tickwait() 2015-08-01 16:00:23 -06:00
Gregory Nutt
ffec6124f2 Add a start time to sem_tickwait() to account for any elapsed time before the timer is actually started 2015-08-01 14:57:31 -06:00
Gregory Nutt
030573ba5c More improvements to the sporadic scheduler 2015-08-01 09:08:48 -06:00
Gregory Nutt
12cbe147a0 Forget to add files before last commit 2015-08-01 07:34:27 -06:00
Gregory Nutt
2c66e0eb2a sem_tickwait(): Add a new, non-standard function to perform timed semaphore waits. It is functionally equialent to the standard sem_timedwait(), but more efficient for use in higher performance device drivers. Requested by Max Neklyudov 2015-08-01 07:31:09 -06:00
Gregory Nutt
5772813d29 Change the name of the local variable sigset to set to prevent name collisions with the function of the same name 2015-07-31 13:32:10 -06:00
Anton D. Kachalov
4a16bc6924 [sched/pthread/pthread_kill] Add missed header for enabled CONFIG_SCHED_HAVE_PARENT 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-30 18:51:37 +03:00
Gregory Nutt
3a93be8902 Add strictly limit check: The current sporadic scheduler cannot handler duties > 50% 2015-07-30 07:36:01 -06:00
Gregory Nutt
a6ccb7f308 Sporadic scheduler: Third design. Now it looks closer to what I want 2015-07-28 14:26:31 -06:00
Gregory Nutt
dd5b065753 Sporadic: This interim version works pretty well, but the things that I had to do were nasty and mean that -- sigh -- there will be another redesign coming 2015-07-28 08:03:40 -06:00
Gregory Nutt
95ca3a1d1e Fixes several more sporadic scheduler bugs 2015-07-27 18:08:21 -06:00
Gregory Nutt
a7322f5a6d Sporadic scheduler: Fix how suspension time is calculated 2015-07-27 15:54:19 -06:00
Gregory Nutt
e33c727520 Sporadic scheduler: Move pending time into each timer instance 2015-07-27 14:48:21 -06:00
Gregory Nutt
e66e2f5c0f Use the last budgeted time from the last timer started 2015-07-27 13:13:30 -06:00
Gregory Nutt
8c754ccd4f Sporadic scheduler: misc bug fixes 2015-07-27 11:55:52 -06:00
Gregory Nutt
cc1c7731da Sporadic scheduler: Fix budget computations when replenishment intervals are nested 2015-07-27 09:35:52 -06:00
Gregory Nutt
484f148001 Sporadic scheduler: Add instrumentation hooks to support GPIO outputs 2015-07-27 08:37:25 -06:00
Gregory Nutt
7c04ad8209 Sporadic scheduler: Cosmetic change to debug output and to comments 2015-07-26 15:33:27 -06:00
Gregory Nutt
99664b7811 Sporadic scheduler: Add logic to collection the partial timer expiration when a sporadic thread is suspended in tickless mode 2015-07-26 15:03:47 -06:00
Gregory Nutt
4bdbc387f5 Update TODO list; Fix a few errors introduced withe the last changes to the sporadic scheduler 2015-07-26 10:51:04 -06:00
Gregory Nutt
3e88b77540 Sporadic scheduler: Handle a case when the scheduler is resumed before it has even had a chance to run 2015-07-26 08:08:45 -06:00
Gregory Nutt
26fd7a7ccf The redesigned sporadic scheduler now seems to be functional 2015-07-25 13:22:46 -06:00
Gregory Nutt
27e21710fd This is basically a complete redesign of the sporadic scheduling logic due to limitations in the initial design 2015-07-25 12:50:53 -06:00
Gregory Nutt
a1031417e8 Comment out part of sporadic scheduler logic: Part of replenishment logic is bogus 2015-07-24 18:18:58 -06:00
Gregory Nutt
1d88dc1fb6 Fix some compilation error when both TICKLESS mode and the SPORADIC scheduler are enabled 2015-07-24 14:35:07 -06:00
Gregory Nutt
ed031388ad sched/Kconfig: The sporadic scheduler option is no longer EXPERIMENTAL 2015-07-24 14:19:18 -06:00
Gregory Nutt
411941d8cd Fix an syntax error in a debug asserion 2015-07-24 13:02:19 -06:00
Gregory Nutt
12cdd2a8fe Fix some bad conditional compilation 2015-07-24 12:27:15 -06:00
Gregory Nutt
0d71260bf2 sched/: Separate the round-robin logic into a separate file so that it is symmetric with the sporadic stuff. Integrate the sporadic scheduler into the time tick interrupt handling and into the tickless operation. 2015-07-24 11:49:28 -06:00
Gregory Nutt
c6c424583d Fix a test for valid scheduling policies 2015-07-24 10:20:22 -06:00
Gregory Nutt
4490744def Add logic to reset the replenish the sporadic scheduler when a task is resumed 2015-07-24 09:55:02 -06:00
Gregory Nutt
ea7dbc984b Add basic sporadic schedule state machine 2015-07-24 09:03:21 -06:00
Gregory Nutt
3b1306078b Sporadic Scheduler: Ensure that the replenishment period is greater than or equal to the budget period 2015-07-23 15:08:41 -06:00
Gregory Nutt
5baa738019 Most cosmetic, but includes some fixes to some range checking 2015-07-23 14:36:49 -06:00
Gregory Nutt
53a17bfd99 Fix a newly introduced compilation error when round roben scheduling is disabled 2015-07-23 13:35:48 -06:00
Gregory Nutt
9095e8eab4 include/, sched/, and libc/: Add support for sporadic scheduling parameters in struct sched_param, posix_spawnattr_t, and pthread_attr_t. Update all user interfaces to pass sporadic scheduling parameters. Feature is dependent on EXPERIMENTAL and no changes have yet been made to core scheduling logic. 2015-07-23 13:16:32 -06:00
Gregory Nutt
13e837b957 Merge remote-tracking branch 'origin/master' into sporadic 2015-07-23 11:25:52 -06:00
Gregory Nutt
aa90da2bc8 pthread_create: Fix an (unlikely) error in fallback value in the event of a failure (which should never occur) 2015-07-23 11:25:25 -06:00
Gregory Nutt
2b3aae0ddc Add basic configuration options for SCHED_SPORADIC 2015-07-23 10:33:30 -06:00
Gregory Nutt
146bdc3c93 TCB: Increase the size of the scheduling policy field from 1 to 2 bits to allow additional, planned scheduling policies 2015-07-23 10:15:07 -06:00
Gregory Nutt
e69d14d89b Fix some warnings/errors detected by nuttx/tools/testbuilds.sh 2015-07-10 18:41:26 -06:00
Max Neklyudov
14e742b108 Implement WNOHANG for waitpid() only and for the case of CONFIG_SCHED_HAVE_PARENT not selected. From Max Neklyudov. 2015-07-02 09:34:58 -06:00
Jussi Kivilinna
13d9383679 Group binding needs to be cleared before sched_releasetcb(), as otherwise group_leave() will be called and group->tg_nmembers decremented or group being released. group_leave() should be called only after group_join() is called, not after group_bind(). From Jussi Kivilinna. 2015-07-01 06:24:34 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Max Neklyudov
61af0d511f Use up_timer_gettime for CLOCK_MONOTONIC in tickless mode. From Max Neklyudov. 2015-06-22 06:37:26 -06:00
Juha Niskanen
e1846dff82 sched/pthread: Implement pthread_mutex_trylock() for recursive mutexes 2015-06-16 08:32:20 -06:00
Juha Niskanen
d16053c33c sched/pthread: Use -1 instead of 0 as PID for unclaimed mutexes 2015-06-16 08:27:38 -06:00
Gregory Nutt
d8db596b3b POSIX message queues: Move mq_setattr() and mq_getattr() from nuttx/libc/mqueue to nuttx/sched/mqueue. Also add sysyscall support for mq_setattr() and mq_getattr(). This is necessary in protected and kernel builds because in those cases the message queue structure is protect and cannot be accessed directly from user mode code. Noted by Jouko Holopainen. 2015-06-03 09:24:17 -06:00
Gregory Nutt
84f0303fc0 mq_timedreceive() move the location where the errno value is set; the TIMEDOUT errno setting was being overwritten by subsequent actions before returning. Noted by Freddie Chopin. 2015-06-03 07:24:50 -06:00
Gregory Nutt
4adda9d428 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
3adcae8ffb Update the type passed to watchdog timer handlers. Using uint32_t is a problem for 64-bit machines. 2015-05-18 08:53:42 -06:00
Gregory Nutt
16276a4793 Change the order of some operations to prevent a debug assertion from firing. 2015-05-18 06:34:54 -06:00
Gregory Nutt
cc77a28f40 If HAVE_GROUP_MEMBERS is not defined, then pthread_kill() really is the same as kill() 2015-05-13 20:34:21 -06:00
Gregory Nutt
4417728955 Re-implemened pthread_kill(). It as just a simple wrapper around kill() but since the correct dispatching of singles for multi-threaded task groups has been implemented, calling kill() does no work. The corrected implementation of pthread_kill() will direct the signal specifically to the specific pthread and no other. 2015-05-13 14:43:43 -06:00
Gregory Nutt
8cb4e78a1a Complete implementation of the IPv6 routing logic. From Max Neklyudov. 2015-05-13 07:22:02 -06:00
Gregory Nutt
071658bb6d Another missing semicolon 2015-04-23 07:18:59 -06:00
Gregory Nutt
093a144934 sem_wait(): Missing comma on debug statement caused compile error with DEBUG on. Why hasn't that been noted before? 2015-04-23 07:15:55 -06:00
Gregory Nutt
f161a1d0f7 atexit: Fix reference to undefined variable in certain configurations. From Juha Niskanen 2015-04-14 07:31:35 -06:00
Gregory Nutt
b4423c1eed Make some file section headers more consistent with standard 2015-04-08 06:47:36 -06:00
Gregory Nutt
af6d9e2684 sched: Do not use uninitialized boolean in waitpid(). From Juha Niskanen 2015-03-12 07:45:10 -06:00
Gregory Nutt
caea44a624 Fix a case in mq_timedsend() where the return errno value was being overwritten 2015-03-10 12:05:33 -06:00
Gregory Nutt
7d46801f46 Reorder some operations to minimize a race condition 2015-03-10 10:41:21 -06:00
Gregory Nutt
4c6057eca1 mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin 2015-03-10 09:42:35 -06:00
Gregory Nutt
12d61531aa Move board_ prototypes from arch.h to board.h 2015-02-27 20:02:03 -06:00
Gregory Nutt
127951e029 Fix places where the errno value was being overwritten by subsequent actions so that the returned errno value was incorrect. From Max Neklyudov. 2015-02-25 07:45:04 -06:00
Gregory Nutt
c99d927527 When an RTC is used, clock_systimespec() must subtract the basetime from the RTC time 2015-02-25 07:24:03 -06:00
Gregory Nutt
cded7ea682 Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00
Gregory Nutt
8840102554 Networking: Divide net_intiialize() into net_setup() and net_initialize() to solve a chicken-and-egg problem. net_setup() must be caleld before up_initialize() is called so that networking data structures are ready to register new network devices. 
net_initialize() now does only timer related operations and is called AFTER up_initialize() where the timers are configured.  This is really.
 2015-02-14 06:36:53 -06:00
Gregory Nutt
a1d3faaa8a Update ChangeLog 2015-02-13 18:39:43 -06:00
Gregory Nutt
bc273596bb Back out commit d998cbdfa6c10dbd8074dd43c39c23a006505987 2015-02-13 18:32:15 -06:00
Gregory Nutt
0fcd620404 Move the initialization of the networking subsystem to AFTER up_initialize is called. Fromo Macs Neklyudov. 2015-02-13 13:41:21 -06:00
Gregory Nutt
3724a5e98e RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
d9f960e97b Fix a problem in clock_systimer64 that occurs when (1) the 64-bit system time is enabled, and (2) the value of CONFIG_USEC_PER_TICK is less than 1 millisconds (such as when using the tickless mode of operation). In that case, the convertion of time to 64-bit millisecond value in clock_systmer64() causes some bad times to be returned. Time was converted to milliseconds, then to configured ticks. Precision was lost in the millisecond convertion. 
The fix is to first convert time to a 64-bit microsecond value, then to the configured tick value.

Noted by David Sidrane.
 2015-02-13 06:13:47 -06:00
Gregory Nutt
147042218b gettimeofday() and settimeofday(): Move gittimeofdady() from sched/clock to libc/time. All remove gettimeofday() from NuttX system calls. It is only a wrapper around clock_settime() and does not need a trap. gettimeofday() is no longer tried as a core OS interface. 
gettimeofday has been decremented in POSIX 2008.  settimeofday() was never part of POSIX, but I decided to add it to libc as well just for symmetry.
 2015-02-12 11:10:46 -06:00
Gregory Nutt
1d534ff896 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
c5ab7c39d3 Eliminates a warning. From Macs N 2015-02-03 06:44:59 -06:00
Gregory Nutt
a448e0f69f On my platform I have just 16-bit timer clocked at 32kHz. As result oneshot timer max delay is 2s. The patch adds limit of maximum ticks in sched_timer_start (nuttx/sched/sched/sched_timerexpiration.c). From Macs N. 2015-02-03 06:25:19 -06:00
Gregory Nutt
e69003cbf7 clock_systimespec(): Fixes for compilation errors in certain configurations. From Macs N. 2015-01-30 08:19:40 -06:00
Gregory Nutt
6bc9a0c9c6 Fix backward calculation in the work queue timing. From Liio Chen via the PX4 repository 2015-01-27 06:17:02 -06:00
Gregory Nutt
826f5516ff Semaphores: sem_waitirq.c must be built when signals are disabled. That is because not handles not only the case of semaphore wait being awakened by a signal, but also the case with sem_timedwait.c when the semaphore wait is awakened by a timeout. 2014-12-28 15:03:12 -06:00
Gregory Nutt
78b755961f Semahores: Remove a warning with SIGNALS are disabled 2014-12-28 14:54:40 -06:00
Gregory Nutt
937f9f23f1 strncpy will not copy the terminating \0 into the destination if the source is larger than the size of the destination. Ensure that the last byte is always zero and let strncpy only copy CONFIG_TASK_NAME_SIZE bytes. The issue of unterminated names can be observed in ps when creating a pthread while CONFIG_TASK_NAME_SIZE is set to 8. 2014-12-17 12:24:02 -06:00
Gregory Nutt
b3a1939020 Sempahores: Add logic to clean up after task_delete() or pthread_cancel() if the task happens to be waiting on a semaphore when it is cancelled 2014-12-13 12:02:25 -06:00
Gregory Nutt
1003ee3e9a Costmetic change to a comment 2014-12-13 10:41:57 -06:00
Gregory Nutt
ff87e2e02a In message queue created return ENOSPC error if size exceeds the configured size of pre-allocatd messages; Use ENOSPC vs ENOMEM per OpenGroup.org. From Pierre-Noel Bouteville 2014-12-06 07:18:48 -06:00
Gregory Nutt
ad05793c0f msg type should be char * not void * in mq_send, mq_timedsend, mq_receive, and mq_timedreceive. Noted by Pierre-Noel Bouteville 2014-12-05 19:16:14 -06:00
Gregory Nutt
2ab604f74f Fix more issues detected by cppcheck 2014-11-25 14:25:02 -06:00
Gregory Nutt
1aa528a572 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 14:10:35 -06:00
Gregory Nutt
6f94e5e4be Cosmetic chnages to comments 2014-11-20 07:10:48 -06:00
Gregory Nutt
8c28718bcb alling mq_timedreceived with immediate timeout was getting stuck and not 
timeout. Immediate timeout is achieved by setting absolute timeout value to
past time, for example abstime={ .tv_sec=0, .tv_nsec=0 }. However absolute
time was converted to relative time using unsigned integer arithmetic and
resulted large ticks count by clock_abstime2ticks, instead of expected negative
ticks value.

Patch corrects clock_abstime2ticks to return negative ticks, if absolute time
is in the past.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-19 09:25:00 -06:00
Gregory Nutt
9e290c10b5 Fix some compile issues introduces with removal of CONFIG_MAX_TASK_ARGS 2014-11-14 09:53:11 -06:00
Gregory Nutt
838f2053e4 Fix some compile errors introduce in last commits 2014-11-13 07:44:45 -06:00
Gregory Nutt
bc265d74e7 task_create: Don't even try if the accumulated size of the argument list is larger than the stack 2014-11-13 06:44:15 -06:00
Gregory Nutt
bb9b0f572d vfork no longer depends on CONFIG_MAX_TASK_ARGS 2014-11-12 19:01:29 -06:00
Gregory Nutt
4638a97f97 task_start() no longer depends on CONFIG_MAX_TASK_ARGS 2014-11-12 18:54:35 -06:00
Gregory Nutt
ffbd6cf10a task_setup() no longer depends on CONFIG_MAX_TASK_ARGS 2014-11-12 18:49:58 -06:00
Gregory Nutt
fcffafee30 Remove CONFIG_MAX_TASK_ARGS from all Kconfigs and defconfigs 2014-11-12 18:02:19 -06:00
Gregory Nutt
2caeead612 Fix an important bug in the watchdog creation logic 2014-11-10 18:15:26 -06:00
Gregory Nutt
fcc2a1bb4b Fix incorrect comment 2014-11-07 15:54:24 -06:00
Gregory Nutt
2da26f7884 More fixes to tickless operation, alarm/mode code. From Brandon Warhurst 2014-10-23 07:13:57 -06:00
Gregory Nutt
a7a5c8cff3 Fixes to tickless operation code. From Brandon Warhurst 2014-10-23 06:41:31 -06:00
Gregory Nutt
928b0bda3d Default for CONFIG_SCHED_HPWORK should be no 2014-10-14 16:56:37 -06:00
Gregory Nutt
179fabb019 Add description of work queues to the porting guide. Update comments 2014-10-14 10:21:18 -06:00
Gregory Nutt
c9563da832 Missing workqueue logic 2014-10-12 17:19:51 -06:00
Gregory Nutt
e702d9396b Fix one missed name change from last big commit 2014-10-12 07:09:57 -06:00
Gregory Nutt
c9d7472d68 Change naming of HP work queue configuration varaibles to be symmetric with LP work queue naming 2014-10-11 17:03:44 -06:00
Gregory Nutt
1a27a4d4c0 Eliminate warnings 2014-10-11 17:02:35 -06:00
Gregory Nutt
b78fe7c270 Rename CONFIG_SCHED_USRWORK to CONFIG_LIB_USRWORK 2014-10-11 15:59:40 -06:00
Gregory Nutt
9292e3d9de Decouple the user-space work queue from the kernel space work queues 2014-10-11 15:50:22 -06:00
Gregory Nutt
bb1d91bd83 Make building of low-priority work queue independent of also building the high-priority work queue 2014-10-11 14:43:24 -06:00
Gregory Nutt
c0b703ac73 Fix some missing conditional compilation that caused build failures in some configurations 2014-10-11 08:50:00 -06:00
Gregory Nutt
d2424ac65c Fix a couple of problems introduced in the last commmits 2014-10-11 08:29:26 -06:00
Gregory Nutt
0218f01f12 If there mutliple low-priority worker threads, only one needs to perform garbage collection 2014-10-11 07:09:21 -06:00
Gregory Nutt
234f73cb09 Add logic for priority inheritance with multiple worker threads. How should this work? Tentatively, the all get reprioritized together. It would be best to just reprioritize the single thread doing the high priority work, but we don't know which that will be in advance 2014-10-10 17:47:39 -06:00
Gregory Nutt
4a4b3ac537 Add support for multiple low-priority worker threads 2014-10-10 16:24:50 -06:00
Gregory Nutt
438e3e1a90 Fix a few bugs introduced in the last checkin 2014-10-10 15:06:13 -06:00
Gregory Nutt
cf59a195ba User-mode work queue logic should not disable interrupts 2014-10-10 14:52:04 -06:00
Gregory Nutt
16a3e83258 Add support for delays of different durations in work queue processing 2014-10-10 13:21:37 -06:00
Gregory Nutt
75e7a4dbfc Minor changes to work queue timing logic 2014-10-10 12:27:11 -06:00
Gregory Nutt
b2cebaa9d4 Modularize starting of worker threads to better isolate individual initialization characteristics 2014-10-10 09:38:28 -06:00
Gregory Nutt
2015fd76e2 Fix some conditional logic in last work queue repartitioning change 2014-10-10 08:47:41 -06:00
Gregory Nutt
1afc9773ac Decoupling work queue data structures. This is part of the preparation to support multiple low-priority worker threads 2014-10-10 08:35:58 -06:00
Gregory Nutt
6220256a09 Repartition work queue code. Move kernel-specific parts from libc/wqueue to sched/wqueue 2014-10-10 06:22:51 -06:00
Gregory Nutt
7f36c4e97b Update some Kconfig comments; Add a upper limit on the lower priority worker thread for priority inheritance 2014-10-07 17:11:26 -06:00
Gregory Nutt
322f9f401c Simplify how C source files are selected in the build 2014-10-07 07:42:36 -06:00
Gregory Nutt
d7843c8e24 Add support for priority inheritance on the low priority worker queue 2014-10-07 07:41:52 -06:00
Gregory Nutt
38ddbc774f Cosmetic change to comments 2014-10-06 18:03:01 -06:00
Gregory Nutt
37cf4135c4 fs_initialize() is no longer weak 2014-10-06 11:45:35 -06:00
Gregory Nutt
d914f3ceec Major structure of file system functions to better support asynchronous I/O. Respository should not be trusted until I have a chance to verify everything 2014-10-06 10:53:25 -06:00
Gregory Nutt
87eb1d47ed Fix some recently introduced typos, build problems, and warnings 2014-10-05 16:58:52 -06:00
Gregory Nutt
652d3ed29d Rename CONFIG_LIBC_AIO to CONFIG_FS_AIO since it is now an OS property 2014-10-05 15:44:43 -06:00
Gregory Nutt
31cdcde73a Add definitions for SIGPOLL 2014-10-05 06:02:37 -06:00
Gregory Nutt
da29907ac9 Update TODO list + cosmetic changes to clock_systimer.c 2014-10-03 11:21:35 -06:00
Gregory Nutt
8d43a6bdcd Fix build error with CONFIG_SYSTEM_TIME64 2014-10-03 10:20:46 -06:00
Gregory Nutt
71b574f26c Repartition some message queue logic: sched/mqueue should have all mqueue knowledge; fs/mqueue should deal only with inodes 2014-09-30 08:03:39 -06:00
Gregory Nutt
fcfe877e96 Cosmetic update to comments 2014-09-29 16:22:21 -06:00
Gregory Nutt
1f2cc9f4fe Complete re-implementation of mq_close 2014-09-29 15:33:34 -06:00
Gregory Nutt
584d0fe4ad Complete re-implementation of mq_open() 2014-09-29 14:59:31 -06:00
Gregory Nutt
9e975a217d Separate mqueue allocation logic from mq_open() and put it in sched/mqueue/mq_msgqalloc.c 2014-09-29 14:09:31 -06:00
Gregory Nutt
b0f80cc8db Move mq_open.c, mq_close.c, and mq_unlink.c from sched/mqueue to fs/mqueue 2014-09-29 13:35:32 -06:00
Gregory Nutt
e3fa34681b Convert mqueue structure for use in VFS as inode data; rename mqueue_inode_s; remove links, reference counts and name from mqueue structure. These will be replaced by VFS data. Remove g_msgqueues and mq_findnamed.c; these will be replace with VFS logic 2014-09-29 13:19:11 -06:00
Gregory Nutt
542e706d7d Fix a perverse case where vfork() is called from a pthread. Still not recommended 2014-09-29 12:21:34 -06:00
Gregory Nutt
1dc9768c1a Fix vfork(). Now that arguments are kept on the stack, the way that arguments are passed from parent to child in vfork() must change. This bug has always been present, but was not visible with the old strdup() way of passing arguments 2014-09-29 10:45:44 -06:00
Gregory Nutt
9a3f18db37 Fix missing header file for bug introduced yesterday 2014-09-29 07:48:45 -06:00
Gregory Nutt
8c958be5ab Semaphore initialization is now only required if priority inheritance is initialized 2014-09-29 06:50:48 -06:00
Gregory Nutt
650a0d0615 Completes VFS-based named semaphore implemetation. Still a little buggy 2014-09-28 15:58:56 -06:00
Gregory Nutt
30694f064c Add VFS-based sem_open() implementation 2014-09-28 14:35:17 -06:00
Gregory Nutt
a41c1de32c Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
Gregory Nutt
b33c2d9cef Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
1863370672 Move include/nuttx/shm.h to include/nuttx/mm/shm.h 2014-09-24 07:05:02 -06:00
Gregory Nutt
835c91b03a Add support for a per-process virtual page allocator. This is a new member of the task_group_s structure. The allocaor must be initialized when a new user process is started and uninitialize when the process group is finally destroyed. It is used by shmat() and shmdt() to pick the virtual address onto which to map the shared physical memory. 2014-09-23 16:04:39 -06:00
Gregory Nutt
e326fcfef3 Fix some inconsistent field name in struct task_group_s: addrenv should be tg_addrenv. 2014-09-23 16:01:44 -06:00
Gregory Nutt
a73a3ef99f Add shared memory initializatin logic 2014-09-23 08:46:31 -06:00
Gregory Nutt
5d9276ed71 More changes so that the KNSH build survives the changes needed for the ELF build 2014-09-16 15:55:21 -06:00
Gregory Nutt
1ef758d67f A couple more changes for clean ELF build 2014-09-16 15:40:48 -06:00
Gregory Nutt
925fc9ad81 First round of changes to get the ELF configuration building again 2014-09-16 15:37:05 -06:00
Gregory Nutt
701719b2ca Don't release user stack in kernel build. Already destroyed with all of the address environment 2014-09-15 12:45:41 -06:00
Gregory Nutt
a5e30ac4a1 execv() is a basic system interface. It should not be in libc/ but rather in sched/task. Its symboltable helper logic also belongs in the kernel but belings in binfmt/ with the other symbol table logic 2014-09-15 10:16:20 -06:00
Gregory Nutt
da7a440b35 execv() is a basic system interface. It should not be in libc/ but rather in sched/task. Its symboltable helper logic also belongs in the kernel but belings in binfmt/ with the other symbol table logic 2014-09-15 10:15:19 -06:00
Gregory Nutt
3649dab9bd Initial integration of kernel stack (does not work) 2014-09-14 11:19:34 -06:00
Gregory Nutt
e12213592b Don't build task_create() or task_spawn() interfaces if there is an addres environment 2014-09-14 08:22:21 -06:00
Gregory Nutt
eae146d641 Kernel proxy thread should be a kernel thread, not a user task 2014-09-14 08:20:40 -06:00
Gregory Nutt
ba7d5acf94 Fix a couple more places where the wrong allocator is being used 2014-09-11 15:56:04 -06:00
Gregory Nutt
fc35e35165 When a privileged thread exits, we have to use the kernel alloctor to free memory; when an unprivileged thread exits, we don't have to do anything... heap memory will be cleaned up when the address environment is torn down 2014-09-11 09:00:10 -06:00
Gregory Nutt
44499ed46c Rename some functions and reshuffling some paramters 2014-09-11 08:37:06 -06:00
Gregory Nutt
81a4de4a4d Kconfig choice value needs a prompt 2014-09-11 07:18:33 -06:00
Gregory Nutt
4a20cd65c5 clock_gettime.c: Fix a cornercase bug in clock_gettime() 2014-09-10 17:10:54 -06:00
Gregory Nutt
c19659d7d2 Fixes to clock bias logic. Remove vestiges of g_tickbias; apply bias instead to g_basetime 2014-09-10 16:36:25 -06:00
Gregory Nutt
e953fb11cd A const storage class to to phthread parameters. From Freddie Chopin 2014-09-08 06:21:48 -06:00
Gregory Nutt
1822b86373 Fix some conditional compilation in kernel build mode. And, while we are touching this logic, make g_default_pthread_attr const. 2014-09-07 10:46:58 -06:00
Gregory Nutt
47d55c28dc Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
e958040269 Add capability to perform initial board initialization on a separate worker thread. 2014-09-03 18:36:43 -06:00
Gregory Nutt
b2a94b6f2b Fix more places where the user-mode allocator is used to allocate kernel thread resources -- before the user-mode allocator even exists 2014-09-03 14:58:24 -06:00
Gregory Nutt
fd6205b62a Group creation logic must use new group flag when allocating resources so that the privileges on the resource are set correctly 2014-09-03 13:49:35 -06:00
Gregory Nutt
c81093913a IDLE TCB setup needs to indicate the the IDLE thread is a privileged, kernel thread 2014-09-03 13:47:11 -06:00
Gregory Nutt
b4438e44c5 Restructuring of build to allow use of use-space allocators by kernel logic in the kernel build. 2014-09-02 11:22:09 -06:00
Gregory Nutt
a5af2568eb sbrk() need to initialized the memory manager on the first call 2014-09-02 08:05:11 -06:00
Gregory Nutt
0e3c182e3b Fix error in initialize of IDLE TCB due to last change. The argument list is no long in the TCB, but in the stack. But not for the IDLE task. It needs its own mini-argv[] list so that it looks more like other threads. 2014-09-01 16:49:42 -06:00
Gregory Nutt
64ab35b399 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
23147c40a5 Remove final traces of the 8015 from the NuttX source tree 2014-09-01 13:21:15 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
9aca0c1c84 Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
9ad7dae4c1 Rename kufree to kumm_free for consistency with other naming 2014-08-31 16:15:11 -06:00
Gregory Nutt
9cd1ddada4 Rename kmemalign to kmm_memalign and krealloc to kmm_realooc for consistency with other naming 2014-08-31 15:27:37 -06:00
Gregory Nutt
2904fb0420 Clean up some kernel build heap allocation issues. The Cortex-A kernel build now compiles without errors (but cannot link until brk() and sbrk() are implemented). 2014-08-31 12:50:05 -06:00
Gregory Nutt
67a54fd52e ARMv7-A: A little more logic and a few more fixes for Cortex-A kernel build 2014-08-31 07:15:46 -06:00
Gregory Nutt
fc7bd31e07 last change alters semantics of __HAVE_KERNEL_GLOBALS 2014-08-30 14:44:48 -06:00
Gregory Nutt
2029236ed0 Back out and replace recent kludges for errno and clock_systimer. There is a cleaner way 2014-08-30 14:26:56 -06:00
Gregory Nutt
34ff07008a Add configuration options to start the system from a program on a file system 2014-08-30 13:27:23 -06:00
Gregory Nutt
2906ff6a4a Cosmetic: Fix all comments, defaults, etc. that references the defunct name user_start 2014-08-30 11:14:51 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
0ab1b0de25 nuttx/sched: Remove explicit references to errno. That is a problem from within the kernel for certain configurations 2014-08-28 17:00:24 -06:00
Gregory Nutt
9ab67dce75 In some configurations, g_system_tmer must be extern'ed as a private variable 2014-08-28 17:00:03 -06:00
Gregory Nutt
45f3328247 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
d35723749b Minor address environment clean-up. Cannot generate debug contexts in certain contexts 2014-08-27 14:22:00 -06:00
Gregory Nutt
ad53cabf34 ADDRENV: Use a group flag to determine if there is an address environment (instead of the thread type) 2014-08-27 09:37:28 -06:00
Gregory Nutt
582800a04d Add group_addrenv() which will be called during context switches in order to change address environments. Not yet hooked in 2014-08-26 14:57:05 -06:00
Gregory Nutt
af22f273d3 Add group_addrenv() which will be called during context switches in order to change address environments. Not yet hooked in 2014-08-26 14:54:39 -06:00
Gregory Nutt
1725946447 Misc changed to get the SAMA5 ELF configuration with address environments working 2014-08-25 13:28:13 -06:00
Gregory Nutt
e1799b0423 Cortex-A/SAMA5 address environment support is code complete (untested) 2014-08-25 11:18:32 -06:00
Gregory Nutt
1624e2fbcf Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support 2014-08-24 06:42:11 -06:00
Gregory Nutt
e79d6e3c8b A few fixes for compilation errors due to recent address environment fixes 2014-08-22 15:55:00 -06:00
Gregory Nutt
4e699b00de Need to release the addess environment when the task group is released 2014-08-22 14:49:05 -06:00
Gregory Nutt
1d586e6136 An address environment is the property of a task group, not of a thread 2014-08-22 12:32:34 -06:00
Gregory Nutt
fd484c4de9 Add support for statically allocated watchdog timer structures 2014-08-22 08:46:34 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
952d87587f If we run out of pre-allocated watchdog times, the logic will allocate additional timers from the heap. A reserve of pre-allocated watchdog timers is maintained so that there will always be timers available for interrupt handlers. 2014-08-21 08:44:29 -06:00
Gregory Nutt
27c48a383e Don't do 64-bit calculations if accuracy not achievable; Fix compile error in high res RTC mode 2014-08-15 17:48:07 -06:00
Gregory Nutt
eed1d6c619 When reading the system timer, don't read a struct timespec, convert it to a fake tick count, then back to a timespec. Remove CLOCK_ACTIVETIME.. it is non-standard, unused, and gets in the way of changes like this 2014-08-15 03:55:41 -06:00
Gregory Nutt
2bc07a03ae Correct release notes, updat changelog, fix some conditional compilation 2014-08-15 06:56:42 -06:00
Gregory Nutt
569a0815ca Updated comments 2014-08-12 13:50:18 -06:00