sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,095 Commits 1 Branch 0 Tags 291 MiB
8b294b5a8b
Commit Graph

4090 Commits

Author SHA1 Message Date
Gregory Nutt
41cb79cd99 STM32 Tiny: Rename files for better conformance to naming conventions 2015-03-21 09:01:18 -06:00
Gregory Nutt
4884f9da86 mbed: Rename files for better conformance to naming conventions 2015-03-21 08:31:05 -06:00
Gregory Nutt
47a245bdcb STM3220G-EVAL: Rename files for better conformance to naming conventions 2015-03-21 08:22:00 -06:00
Gregory Nutt
e3a29a07e2 Maple: Rename files for better conformance to standards 2015-03-21 07:35:40 -06:00
Gregory Nutt
8665824e62 SAM3U-EK: Rename to better conform to naming standard 2015-03-21 06:52:32 -06:00
Gregory Nutt
1752d407f2 STM32F3 Discovery: Rename files to conform better with naming convention 2015-03-21 06:36:28 -06:00
Gregory Nutt
629120777d Add Olimexino-STM32 board support from David Sidrane 2015-03-20 18:00:10 -06:00
Gregory Nutt
93e2975141 Refresh Configuration 2015-03-20 17:45:10 -06:00
Gregory Nutt
316d60909b SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM 2015-03-19 14:53:05 -06:00
Gregory Nutt
547a2aea5a SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts 2015-03-18 17:23:40 -06:00
Gregory Nutt
8e2c27f4d5 SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts 2015-03-18 15:55:00 -06:00
Gregory Nutt
2ba7a82738 PIC32MZ: More updates from David Sidrane 2015-03-18 07:34:39 -06:00
Gregory Nutt
97769595b0 Cosmetic update to README 2015-03-17 17:10:44 -06:00
Gregory Nutt
aa4c382bcc PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane 2015-03-17 14:50:11 -06:00
Gregory Nutt
d3724701b9 SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM 2015-03-17 14:29:41 -06:00
Gregory Nutt
9849e22d3b SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling 2015-03-16 13:51:37 -06:00
Gregory Nutt
471cd8491d Trivial update to FAT, comments, README 2015-03-15 15:06:17 -06:00
Gregory Nutt
81b8736779 This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled. 2015-03-15 12:17:39 -06:00
Gregory Nutt
0b4133c064 Update README files 2015-03-15 10:22:14 -06:00
Gregory Nutt
f8b664b727 SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working. 2015-03-15 09:35:48 -06:00
Gregory Nutt
79dbd00f54 SAMV7: Costmetic changes to SDRAM logic 2015-03-14 13:58:34 -06:00
Gregory Nutt
3d34f02168 SAMV7: More SDRAM logic. It does still does not work 2015-03-14 13:27:00 -06:00
Gregory Nutt
93a58ea955 SAMV71-XULT: Add support for SDRAM (unverified) 2015-03-14 11:00:46 -06:00
Gregory Nutt
6c262a4dfb SAMV7-XULT: Build support for SDRAM (SDRAM init still missing) 2015-03-14 09:16:27 -06:00
Gregory Nutt
0db10d9057 Fix some typos in comments and conditioned out code 2015-03-14 09:14:51 -06:00
Gregory Nutt
3e0d673d39 Update README 2015-03-14 07:50:03 -06:00
Gregory Nutt
f89abc4afa SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK 2015-03-13 09:27:16 -06:00
Gregory Nutt
030456a699 Update to PIC32MZ README from David Sidrane 2015-03-13 06:57:58 -06:00
Gregory Nutt
eb6ff69470 SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7 2015-03-12 18:03:41 -06:00
Gregory Nutt
7fd9380485 SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out. 2015-03-12 16:00:38 -06:00
Gregory Nutt
b4f44e9fbb Minor update to README 2015-03-12 13:43:54 -06:00
Gregory Nutt
7f4959b864 SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration 2015-03-12 12:27:06 -06:00
Gregory Nutt
26ac9361e7 SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration 2015-03-11 14:41:58 -06:00
Gregory Nutt
fbee7812f3 Update README 2015-03-11 12:32:00 -06:00
Gregory Nutt
b587ebaed5 SAMV71-XULT: Enable 64-bit floating point support 2015-03-11 12:30:14 -06:00
Gregory Nutt
ea75bef0e7 SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7 2015-03-11 12:16:27 -06:00
Gregory Nutt
ddebe0f9c0 SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs 2015-03-11 11:23:19 -06:00
Gregory Nutt
f00d9adc23 PIC32MZ: Fixes from Kristopher Tate 2015-03-11 10:25:51 -06:00
Gregory Nutt
6064bd08bf SAMV7-XULT: Switch back to the CodeSourcery tools 2015-03-11 10:24:43 -06:00
Gregory Nutt
3e42f50373 SAMV71-XULT: Some bugfixes from early bring-up work 2015-03-10 16:11:28 -06:00
Gregory Nutt
8dc26a0dd9 Fix a case in mq_timedsend() where the return errno value was being overwritten 2015-03-10 12:05:33 -06:00
Gregory Nutt
c65c2a10b5 mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin 2015-03-10 09:42:35 -06:00
Gregory Nutt
95750df002 SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration 2015-03-10 07:50:32 -06:00
Gregory Nutt
1e0bdf2bc9 Update README 2015-03-09 19:58:59 -06:00
Gregory Nutt
822d48b4fc Cortex-M7: Add cache operations 2015-03-09 15:41:48 -06:00
Gregory Nutt
40f92938e3 SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file 2015-03-09 08:23:09 -06:00
Gregory Nutt
fb4324e6c5 SAMV7: Add serial driver 2015-03-08 10:15:42 -06:00
Gregory Nutt
c3a5c9e455 SAMV7-XULT: At 3.3V/300MHz, FLASH should require only 4 wait states 2015-03-08 08:41:35 -06:00
Gregory Nutt
ca03eb6299 SAMV71-XULT: Add heap allocation logic 2015-03-07 11:46:54 -06:00
Gregory Nutt
7d8a3ff0a9 SAMV7-XULT: Disable networking for now 2015-03-07 11:21:22 -06:00
Gregory Nutt
1f3934f10d SAMV71-XULT: Switch to the devkitARM toolchain 2015-03-07 11:15:49 -06:00
Gregory Nutt
44648d4a97 SAMV7: Add basic clock and timer ISR configuration logic 2015-03-07 10:32:47 -06:00
Gregory Nutt
16b29c54a9 SAMV71-XULT: Add linker scripts 2015-03-06 12:46:12 -06:00
Gregory Nutt
7031eda378 SAMV71: More updates on the way to a clean build. Still more to do to complete that journey 2015-03-06 12:13:09 -06:00
Gregory Nutt
1619935500 Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71. 2015-03-06 10:53:57 -06:00
Gregory Nutt
f0864a1139 Add a bare bones framework that will do nothing more than support configuration for the Atmel SAMV71 Xplained Ultra board. Very much a work in progress. 2015-03-06 08:56:44 -06:00
Gregory Nutt
fe25353bc7 Refresh configuration 2015-03-06 08:26:01 -06:00
Gregory Nutt
3bfb9dcd0b Refresh configuration 2015-03-05 11:25:10 -06:00
Gregory Nutt
53c710ae11 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
ca334eaccb PIC32MX SPI: Fix typos in Kconfig; Move constant SPI config data to ROM-able const structure 2015-03-03 10:06:49 -06:00
Gregory Nutt
f4c9119aed PIC32MZ: Default SPI configuration setting is backward; refresh configuration 2015-03-03 09:16:10 -06:00
Gregory Nutt
2ac70b053b PIC32MZ Starter Kit: Add support for on-board buttons 2015-03-02 10:01:10 -06:00
Gregory Nutt
7621e9ed22 Update README 2015-03-01 10:52:44 -06:00
Gregory Nutt
9651b08383 Update README file 2015-03-01 09:44:44 -06:00
Gregory Nutt
97d1e9625b PIC32MZ: Add ability to select flash ECC options 2015-03-01 09:08:44 -06:00
Gregory Nutt
f4daf5068e Refreshed Spark Configurations 2015-02-28 15:44:58 -06:00
Gregory Nutt
91f9c285d8 PIC32MZ: Fix reserved RAM for MPLABX; Revert FPLLRNG calculation; Fix maximum DMTCNT value 2015-02-28 12:49:03 -06:00
Gregory Nutt
5d4cae2cd7 PIC32MZ: Fix some configuration settings and POSC mode should be external clock 2015-02-28 11:54:47 -06:00
Gregory Nutt
d19d394293 PIC32MZ: Add an option to use the MIPS32 or the microMIPS ISA 2015-02-28 08:22:37 -06:00
Gregory Nutt
453a4d2894 Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni 2015-02-28 07:14:37 -06:00
Gregory Nutt
7583c94252 Move board_ prototypes from arch.h to board.h 2015-02-27 20:02:03 -06:00
Gregory Nutt
42327117a3 configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 18:49:24 -06:00
Gregory Nutt
00a4b1f6d6 configs/: Remove prototypes of board_led* functions from all board header files 2015-02-27 17:32:01 -06:00
Gregory Nutt
6934085e22 PIC32MZ: Correct a few more DEVCFG issues 2015-02-27 16:20:28 -06:00
Gregory Nutt
d4fe586d42 Minor correction to toolchain path, comments 2015-02-27 13:14:41 -06:00
Gregory Nutt
9beda0ca40 PIC32MZ: Review DEVCFG setting; adjust a few to match example code 2015-02-27 10:54:18 -06:00
Gregory Nutt
c45d42a253 PIC32MZ: Add logic to configure peripheral pins for the selecte UARTs 2015-02-26 15:05:11 -06:00
Gregory Nutt
b583e40c06 Adjust microMIPS compile options to enable interlinking with 32-bit code 2015-02-25 09:54:48 -06:00
Gregory Nutt
b14da4b621 Refresh configuration 2015-02-25 07:22:58 -06:00
Gregory Nutt
c461f7fe54 PIC32MZ: Add support for a timer interrupt 2015-02-24 15:36:08 -06:00
Gregory Nutt
9ccc28b4d2 PIC32MZ: Add Oscillator header file; Add logic to set up peripheral clocks on reset 2015-02-24 11:16:32 -06:00
Gregory Nutt
b6fafcf198 Merge commit '45e0cf1f4a7664974933db2a408ccea6acad4eff' 2015-02-24 07:13:48 -06:00
sauttefk
4f3f4233ab EK-TM4C1294XL Launchpad has no SD-card socket 2015-02-24 03:29:02 +01:00
Gregory Nutt
f7651a5c6e PIC32MZ: Fix some PLL setup logic 2015-02-23 17:27:28 -06:00
Gregory Nutt
40f40dad5a PIC32MZ: Most related to start up file a FLASH device configuration setup 2015-02-23 16:36:35 -06:00
Gregory Nutt
c1da98fb57 PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected 2015-02-23 12:09:34 -06:00
Gregory Nutt
565610caea MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go 2015-02-22 13:45:59 -06:00
Gregory Nutt
cc182fc1b8 Remove support for obsolete PIC32 toolchain configuration names 2015-02-22 12:14:20 -06:00
Gregory Nutt
ec5caaa14a PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig' 2015-02-22 10:53:24 -06:00
Gregory Nutt
367c3acdc5 Add basic board support for the PIC32MZ (can't build yet of course because there is not yet any PIC32MZ support) 2015-02-22 08:47:09 -06:00
Gregory Nutt
bd2c5bba3b Add path for Pinguino tools. Need to be careful because bin directory has an incompatible make.exe in it 2015-02-21 19:42:46 -06:00
Gregory Nutt
31beaf3fbf pic32mx-starterkit: Move scripts to common directory. Pinguino build needs to use a different linker script 2015-02-21 19:40:50 -06:00
Gregory Nutt
2a5c0b10ce pic32mx-starterkit: Move scripts to common directory. Pinguino build needs to use a different linker script 2015-02-21 19:40:22 -06:00
Gregory Nutt
4e123c3b40 Refresh configurations 2015-02-21 19:38:56 -06:00
Gregory Nutt
de4666e49d Rename pic32-starterkit to pic32mx-starterkit to make room in the namespace for the pic32mz-starterkit 2015-02-21 18:41:17 -06:00
Gregory Nutt
738cd4163d tm4c123g-launchpad: Add board button interrupt logic. From Calvin Maguranis 2015-02-20 12:32:39 -06:00
Gregory Nutt
abe4253a8d tm4c123g-launchad: Add ADC support. From Calvin Maguranis. 2015-02-17 13:52:17 -06:00
Gregory Nutt
1e6358d20e NSH: The default priority of the network initialization thread should be lower. It is CPU intensive and can interfere with other operations 2015-02-17 13:14:50 -06:00
Gregory Nutt
d5dd1e383d Add support for RTC driver to the STM32F4-Discovery board 2015-02-15 10:11:01 -06:00
Gregory Nutt
aaabd05bfc RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
7547468e47 Cosmetic updates to comments 2015-02-12 13:44:22 -06:00
Gregory Nutt
c60e615315 Renamed SPIDEV_GSENSOR to SPIDEV_ACCELEROMETER just because it looks better beside SPIDEV_BAROMETER 2015-02-12 12:26:19 -06:00
Gregory Nutt
5e3f10a6c6 Update ChangeLog 2015-02-12 12:21:05 -06:00
Gregory Nutt
317dc642e4 Viewtool STM32F107: Add support for an optional, add-on Freescale MPL115A baramoter. From Alan Carvalho de Assis 2015-02-12 12:08:06 -06:00
Gregory Nutt
5de459efcb More updates to README files 2015-02-12 09:06:35 -06:00
Gregory Nutt
9eb91fcf59 Updated README files 2015-02-12 07:29:11 -06:00
Gregory Nutt
2706829723 Purely costmetic updates 2015-02-12 07:05:28 -06:00
Gregory Nutt
2a20846e6f The TM4C1294 Launchpad has no on-board TMP100 temperature sensor 2015-02-12 06:49:11 -06:00
Gregory Nutt
4027f10c6a Refresh configurations 2015-02-12 06:48:18 -06:00
Gregory Nutt
7a9720e60c Review/update of the TM4C1294 Launchpad code 2015-02-11 18:27:38 -06:00
Gregory Nutt
31e9cd3b20 Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6' 2015-02-11 18:07:03 -06:00
sauttefk
a1b5538740 Add TI EK-TM4C1294XL launchpad support 2015-02-12 00:30:38 +01:00
Gregory Nutt
64cc006d0c Add support for Freedom KL26Z board. From Derek B. NoonBurg 2015-02-11 07:18:06 -06:00
Gregory Nutt
49e050f698 LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug. 2015-02-10 14:04:08 -06:00
Gregory Nutt
9a621066de SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
2c82dd2afb Refresh configurations 2015-02-10 08:48:02 -06:00
Gregory Nutt
528f959034 Refresh configuration 2015-02-10 06:28:41 -06:00
Gregory Nutt
e20e743472 Refresh Configuration 2015-02-09 18:24:11 -06:00
Gregory Nutt
44f09a084c SAMA5D4-EK: CONFIG_NET_NOINTS is now enabled in the nsh and ipv6 configurations. 2015-02-09 15:27:14 -06:00
Gregory Nutt
62666a030b SAMA5D4-EK: Add a configuration for testing IPv6 2015-02-09 10:51:05 -06:00
Gregory Nutt
e8b4f474d3 Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing). 2015-02-09 08:34:52 -06:00
Gregory Nutt
f33a9f0626 Correct a attribution in a comment 2015-02-09 07:27:43 -06:00
Gregory Nutt
e9e9892646 Updated Tiva ADC files 2015-02-06 16:56:12 -06:00
Gregory Nutt
58d79e93d9 Forgot to add file in previous commit 2015-02-05 18:01:46 -06:00
Gregory Nutt
7442459895 tmv4c123g-launchpad: Add Tiva ADC support to the TM4C123G-Launchpad. From Calvin Maguranis. 2015-02-05 17:58:17 -06:00
Gregory Nutt
d43b3de28d nuttx/configs/tm4c123g-launchpad/src/Makefile 2015-02-05 17:57:31 -06:00
Gregory Nutt
31d4ab1902 Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis 2015-02-05 13:51:32 -06:00
Gregory Nutt
357ee0a3f0 Update README files 2015-02-05 12:07:21 -06:00
Gregory Nutt
0cab41e36f Update README 2015-02-05 11:23:55 -06:00
Gregory Nutt
07d232b84a STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
45cadc9e0b Fix an error in IPv6 netmask caused by a bad range in the Kconfig file 2015-02-05 10:50:25 -06:00
Gregory Nutt
17366dcbb1 Refresh configuration 2015-02-05 10:07:31 -06:00
Gregory Nutt
8a5d6fc78e Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete 2015-02-03 13:25:28 -06:00
Gregory Nutt
573ffe4221 Restore 20Msec default 2015-02-02 14:59:49 -06:00
Gregory Nutt
8592ce93af Auto neighbor solicitation is no longer EXPERIMENTAL and is the default for the DK-TM4C129X/ipv6 configuration 2015-02-02 14:09:06 -06:00
Gregory Nutt
a2a2f2d003 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
f3ed2e36ec Cosmetic update to a few comments 2015-02-01 12:23:57 -06:00
Gregory Nutt
962cec440d Refresh some configurations 2015-02-01 12:15:46 -06:00
Gregory Nutt
6867a78bce Fix compile issues with configs/sim/nettest 2015-02-01 12:00:30 -06:00
jeditekunum
a74435385f Obviously can't use LOWCONSOLE with nsh. 2015-02-01 09:21:51 -06:00
Gregory Nutt
7e0bf3da9d drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
Gregory Nutt
533707f5f4 Moteino Mego: Move linker scripts to scripts/ directory as with other configurations 2015-02-01 06:44:26 -06:00
Gregory Nutt
723e0e2ecb Moteino Mega: Rename files to conform to newer standards. Need to fix all of the old configurations someday 2015-01-31 14:15:13 -06:00
Gregory Nutt
2720144586 Review/modifications for change of last merge 2015-01-31 14:10:53 -06:00
Gregory Nutt
8944a041fd Merge commit '1207647ee19ac48746300f2d3fa8f4679c32de95' 2015-01-31 13:47:10 -06:00
jeditekunum
ca7ecf658f Update README for MoteinoMEGA (ATMEGA1284P) port. 2015-01-31 13:32:31 -06:00
jeditekunum
cd2be452ee Complete initial port. 2015-01-31 11:59:39 -06:00
Gregory Nutt
00a561126d Unix domain: Add options to build in stream or datagram support separately 2015-01-31 07:58:51 -06:00
Gregory Nutt
94d18aedf4 apps/ustream and udgram: Change default FIFO path to /dev/fifo 2015-01-30 09:07:22 -06:00
Gregory Nutt
290e7465c3 Update configuration 2015-01-29 16:30:43 -06:00
Gregory Nutt
626d2257b8 Update ChangeLog 2015-01-29 11:48:46 -06:00
Gregory Nutt
ce67047a79 update configuration 2015-01-29 09:33:24 -06:00
Gregory Nutt
bfa58153ec Minor fixes after initial tests with apps/examples/udgram 2015-01-28 15:27:54 -06:00
Gregory Nutt
02dce5b0fe net/socket/accept.c: Ooops.. deleted one too many header files 2015-01-28 14:56:06 -06:00
Gregory Nutt
d0e00041e6 Unix domain socket support is no longer EXPERIMENTAL 2015-01-28 13:22:53 -06:00
Gregory Nutt
1fdc10298e Refresh configurations 2015-01-28 12:47:03 -06:00
Gregory Nutt
3bc8bf4a38 sim/ustream: Add a configuration for testing Unix domain sockets with the simulator 2015-01-28 09:09:27 -06:00
jeditekunum
df36a6243c Try console on serial 1. 2015-01-26 14:33:25 -06:00
Gregory Nutt
4f5386bbb2 Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth 2015-01-26 07:33:22 -06:00
jeditekunum
2103ca967a First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board. 2015-01-24 14:31:35 -06:00
Gregory Nutt
fec9e724d7 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
45923970e2 Update README 2015-01-23 16:55:39 -06:00
Gregory Nutt
df9d103360 configs/dk-tm4c129x/ipv6: Add an IPv6-enabled NSH configruation 2015-01-23 11:45:50 -06:00
Gregory Nutt
84102addf0 Cosmetic changes to comments; refresh configuration 2015-01-22 14:46:36 -06:00
Gregory Nutt
ca31cf4608 Refresh configuration/update some misnamed conditional compilation 2015-01-18 11:17:00 -06:00
Gregory Nutt
de923ae391 Missing # in #if in previous commit 2015-01-17 17:13:04 -06:00
Gregory Nutt
3a0812508b Spark: Certain combinations of conditional compilation results in compilation errors 2015-01-17 14:19:25 -06:00
Gregory Nutt
764b5075bc Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future 2015-01-14 10:51:09 -06:00
Gregory Nutt
6e51304d4b Remove the px4-v2_upstream configuration. Moved to misc/Obsoleted/configs. 
This is not the official configuration for the PX4 board and has led to confusion by NuttX users.  The board configuration also requires some ongoing maintenance and customization to support ongoing PX4 testing and evaluation.  It is best retained the PX4 repositories where it can be properly maintained and not in the upstream NuttX repository.
 2015-01-14 09:54:51 -06:00
Gregory Nutt
f374e5fde4 Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts. 
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer).  Also, do not unconditional enable the timer out interrupt.  The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
 2015-01-14 07:33:59 -06:00
Gregory Nutt
ef409169fa Update README 2015-01-13 16:17:07 -06:00
Gregory Nutt
1f24e7e155 Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress. 2015-01-13 11:49:00 -06:00
Gregory Nutt
c2a47142e8 DK-TM3C129X Timer: Add timer initialization logic to the board bring-up 2015-01-13 11:10:35 -06:00
Gregory Nutt
f482e6e3db TM4C123G LaunchPad: Button support from Bradlye Noyes 2015-01-12 21:14:01 -06:00
Gregory Nutt
427e5c98c5 Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module 2015-01-09 14:10:31 -06:00
Gregory Nutt
80c7fa20b9 Update README 2015-01-07 06:23:24 -06:00
Gregory Nutt
57202946a8 DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration 2015-01-06 13:23:35 -06:00
Gregory Nutt
4d7efb5865 DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup 2015-01-06 13:23:02 -06:00
Gregory Nutt
524ccad0ba DK-TM4C129X: Add support for on-board TMP100 temperature sensor 2015-01-06 11:50:56 -06:00
Gregory Nutt
9eda193c39 Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt 2015-01-05 15:12:45 -06:00
Gregory Nutt
4457727cec DK-TM4C129X: Enable I2C6 and the I2C tool in the default configuration 2015-01-05 13:40:55 -06:00
Gregory Nutt
a3b32b0545 DK-TM4C129X: The network monitor is no enabled by default in NSH configuration 2015-01-05 12:09:33 -06:00
Gregory Nutt
43824e4725 Tiva Ethernet: Add support for PHY interrupts 2015-01-03 13:16:26 -06:00
Gregory Nutt
a6d128c06a DK-TM4C129X: Ethernet networking is now enabled by default in the NSH configuration 2015-01-03 10:27:04 -06:00
Gregory Nutt
1b2d2f81cf DK-TM4C129X: Fix RAM size in defconfig files 2015-01-03 09:44:02 -06:00
Gregory Nutt
af8245c42c DK_TM4C129X: Add more GPIO pin definitions 2015-01-01 14:16:05 -06:00
Gregory Nutt
e69855eb72 DK_TM4C129X: Add some GPIO pin definitions 2015-01-01 13:55:53 -06:00
Gregory Nutt
7fbd970ed6 TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers 2015-01-01 12:28:46 -06:00
Gregory Nutt
47480b4696 Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done 2015-01-01 07:55:15 -06:00
Gregory Nutt
9c74f502d6 Refresh configuration 2014-12-31 07:32:47 -06:00
Gregory Nutt
db574ef3cb Remove menuconfig warning 2014-12-31 07:31:49 -06:00
Gregory Nutt
aff4c9cfd0 stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:50:36 -06:00
Gregory Nutt
868d4b7afc STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken 2014-12-29 07:02:32 -06:00
Gregory Nutt
217f3fec70 STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported 2014-12-29 07:01:36 -06:00
Gregory Nutt
83b8e15570 Fir STM32v2: Refresh configuration 2014-12-28 18:29:35 -06:00
Gregory Nutt
3089f2e24e Fire STM32v2: Fix missing stuff in Kconfig file 2014-12-28 18:29:13 -06:00
Gregory Nutt
20b5980828 C5471 EVM: Refresh configurations 2014-12-28 18:15:30 -06:00
Gregory Nutt
9a79849116 Cloudctrl: Add missing configuration logic 2014-12-28 17:51:11 -06:00
Gregory Nutt
78d6c9d21c Compal e86 NSH: Fix numerous typos in Make.defs 2014-12-28 17:34:59 -06:00
Gregory Nutt
22125246b0 Hymini-STM32v USB MSC: Fix configuration. Needs mountpoint support for USB MSC. Refreshed 2014-12-28 17:12:03 -06:00
Gregory Nutt
febd316186 Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled 2014-12-28 16:55:47 -06:00
Gregory Nutt
d74b28befd MBED NSH: Should not have CONFIG_SPI_EXCHANAGE in the configuration 2014-12-28 16:39:02 -06:00
Gregory Nutt
de6e8d1852 Freedom-KL25z: Fix breakage from last configuration refresh 2014-12-28 15:23:37 -06:00
Gregory Nutt
6368445671 Mikroe-STM32F4: Refresh one configurations, turning off DEBUG 2014-12-28 14:39:19 -06:00
Gregory Nutt
0c79c319d2 LM3S6965-EK: Refresh one configurations, turning off DEBUG 2014-12-28 14:35:47 -06:00
Gregory Nutt
e847dd1ca0 Freedom KL25Z: Refresh one configurations 2014-12-28 14:30:44 -06:00
Gregory Nutt
21e7606a88 Eagle100: Refresh one configurations, turning off DEBUG 2014-12-28 14:22:11 -06:00
Gregory Nutt
0d33717de4 STM32F429-Disco: Refresh five configurations, turning off DEBUG 2014-12-28 14:04:53 -06:00
Gregory Nutt
06db611676 STM32F40G-EVAL: Refresh two configurations, turning off DEBUG 2014-12-28 13:53:53 -06:00
Gregory Nutt
c1f61b813c Refresh Configuration 2014-12-26 09:33:20 -06:00
Gregory Nutt
7d06a77555 Update px4fmu-v2_upstream config 2014-12-26 08:40:02 -06:00
Gregory Nutt
9e0483e37c Fix columnar alignment in Kconfig file. From David Sidrane 2014-12-26 08:37:27 -06:00
Gregory Nutt
9bed954924 Cosmet updates to comments and README files 2014-12-24 08:15:21 -06:00
Gregory Nutt
a322029dbe DK-TM4C129X: Fix sense of LEDs; active high. Also GPIO for blue and green reversed 2014-12-22 17:41:04 -06:00
Gregory Nutt
b9d0094124 TM4C129X: A small step toward understanding new Tiva clocking 2014-12-22 09:30:41 -06:00
Gregory Nutt
7e5a0f227d Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3 2014-12-21 15:23:37 -06:00
Gregory Nutt
b6839f5407 Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h 2014-12-20 08:38:11 -06:00
Gregory Nutt
56340ae971 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
6194fed86b Stuff that goes along with the new LTDC README file 2014-12-19 14:14:41 -06:00
Gregory Nutt
e63730e995 stm32f429i-disco: add default platform configuration to test framebuffer support for the ltdc 
Memory configuration:

The heap start address of memory region 3 starts at 0xD0000000.
The allocated framebuffer of the layers is addressed up to the end of the memory
region 3.

If the layer pixel format changes e.g. from RGB565 to RGB24, than the memory
configuration must be configured too. Currently an easy memory calculation
is missing for that in Kconfig.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:08:59 -06:00
Gregory Nutt
78ff2450cb stm32f429i-disco: initialize ltdc during bootup 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:05:19 -06:00
Gregory Nutt
9853b62e73 stm32f429i-disco: enable configuration of framebuffer support for the ltdc controller 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:02:26 -06:00
Gregory Nutt
a5a8349226 stm32f429i-disco: Add support for initializing ltdc framebuffer and the configured lcd display 
This adds support for initializing of the ltdc controller and the lcd device connected on the stm32f429i-disco. The following methods are provided for the generic fb interface:

- up_fbinitialize
- up_fbgetvplane
- fb_uninitialize

The following methods are provided for the ltdc interface:

- up_ltdcgetlayer

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:54:27 -06:00
Gregory Nutt
bd078141a6 stm32f429i-disco: update board definition for the ili9341 LCD display. This configures all LCD settings for the RGB interface. Also adds a customer LCD display template. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:34:37 -06:00
Gregory Nutt
e0933cc3b4 TM4C129X: Add custom system control header file (incomplete) 2014-12-19 12:12:52 -06:00
Gregory Nutt
f59125fcbd Add some OpenOCD scripts for some TI Tiva boards 2014-12-18 16:54:48 -06:00
Gregory Nutt
6729649515 Tiva: Fix configuration logic for IRQ interrupts. The various parts support varying numbers of GPIO blocks and with varying capabilities to support interrupts on the pins of different GPIO blocks 2014-12-18 15:33:52 -06:00
Gregory Nutt
6abc3db2ac Tiva: Change negative logic CONFIG_TIVA_DISABLE_GPIOx_IRQS to positive logic CONFIG_TIVA_GPIOx_IRQS 2014-12-18 15:19:16 -06:00
Gregory Nutt
dc0231c2b6 Fix a couple of spelling errors in comments 2014-12-18 13:56:15 -06:00
Gregory Nutt
65675a1e84 Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
Gregory Nutt
b59e87ba5a DK-TM4C129X: Add support for buttons 2014-12-18 11:51:30 -06:00
Gregory Nutt
c6471c64ae DK-TM4C129X: Add LED support 2014-12-18 10:20:34 -06:00
Gregory Nutt
e0540f2b96 DK-TM4C129X: Fixes to get clean build. Logic is still not complete, however 2014-12-18 08:24:24 -06:00
Gregory Nutt
50214145a2 Freedom-KL25Z: Add pin configuration for add-on ADXL345 board. From Alan Carvalho de Assis 2014-12-18 07:27:49 -06:00
Gregory Nutt
32238fa2bc A previous change increased the task name size allocation by one to hold a NUL terminator. This changes reduces the configured name size by one so that no additional memory is used 2014-12-17 12:30:26 -06:00
Gregory Nutt
ae7e44eb1b DK-TM4C129X: Switch to Windows/Cygwin + CodeSourcery 2014-12-17 07:00:22 -06:00
Gregory Nutt
6b06d5fa61 Remove packaging indications for TM4C129 configuration variables 2014-12-16 16:22:52 -06:00
Gregory Nutt
f0ee6708c0 Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system 2014-12-16 16:02:21 -06:00
Gregory Nutt
3984cb98e4 Add basic board support for the DK-TM4C129X Connected Development Kit. The initial commit is simply the TM4C123G Launchpad with naming changes 2014-12-16 15:29:14 -06:00
Gregory Nutt
6b89bc3a05 Remove EXPERIMENTAL dependency from the Traveler game. It is basically functional now. 2014-12-16 15:27:36 -06:00
Gregory Nutt
2d5098d25c Update README files 2014-12-16 14:58:25 -06:00
Gregory Nutt
3b0c3a0fb6 Fix some typos ADXL (adxl) vs ADX1 (adx1) 2014-12-16 13:50:58 -06:00
Gregory Nutt
6adf5f96a7 A few bugs/typos introduced with my last change 2014-12-16 12:33:41 -06:00
Gregory Nutt
75637464b2 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
db562b774a Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
ee9e8f0a20 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
6655ca399a Forgot to add file before last commit 2014-12-16 07:48:58 -06:00
Gregory Nutt
b0d219b090 Freedom-KL25Z: Add board specific code to interface with ADXL345 driver. From Alan Carvalho de Assis 2014-12-16 07:48:22 -06:00
Gregory Nutt
a9774a3171 Update README files 2014-12-15 19:01:40 -06:00
Gregory Nutt
1340464103 Various fixes to traveler joystick input logic and to simulated joystick device 2014-12-14 12:23:19 -06:00
Gregory Nutt
68e2d80be4 SIM: Add an X11 mouse-based simulation of an analog joystick device 2014-12-14 10:19:07 -06:00
Gregory Nutt
8c60335f94 Traveler: Add support for analog joystick 2014-12-14 08:55:18 -06:00
Gregory Nutt
ecbd3c5e92 TM4C123G LaunchPad: Update STATUS in README file 2014-12-13 07:46:05 -06:00
Gregory Nutt
8dcfcaec72 Tiva I2C: Fix how I2C transactions are started and some I2C error reporting 2014-12-11 12:31:42 -06:00
Gregory Nutt
a50a22bccd TM4C123G LaunchPad: Add initialization logic for an external AT24 EEPROM. This is intended only to suppport testing of the Tiva I2C driver 2014-12-10 15:56:49 -06:00
Gregory Nutt
489265258d Refresh configuration 2014-12-09 12:18:39 -06:00
Gregory Nutt
3c7bb547ec Update the Tiva I2C register definitions for the TM4C123 and TM4C129 2014-12-09 08:42:12 -06:00
Gregory Nutt
df0d5e1fbb Update README 2014-12-09 06:21:30 -06:00
Gregory Nutt
bce4a2706d Traveler: Add logic to limit the frame rate. This is kind of a silly feature -- why would you ever want to limit the frame rate? Well, you need to that on the simulated platform to make bandwidth for other things to run like the simulated timer 2014-12-08 13:45:17 -06:00
Gregory Nutt
18ab47f40c Travel: Fix more initialization errors, mostly related to file path problems 2014-12-08 12:39:02 -06:00
Gregory Nutt
935ec6a07d Extend the simulator to provide special initialization for the Traveler game 2014-12-08 10:54:58 -06:00
Gregory Nutt
52385327e7 Traveler: Add build configuration for the simulated target 2014-12-08 09:33:56 -06:00
Gregory Nutt
b39b628bcc Refresh configuration 2014-12-08 08:29:08 -06:00
Gregory Nutt
aa3867f4f4 Fix compilation errors if CONFIG_DISABLE_MOUNTPOINT is selected 2014-12-08 07:14:31 -06:00
Gregory Nutt
4e346dfe29 Nucleo-f4x1re: Add pull-ups to joystick button GPIOs 2014-12-04 13:20:47 -06:00
Gregory Nutt
da72a93012 Nucleo-f4x1re: Fix some joystick pin definitions 2014-12-04 12:04:21 -06:00
Gregory Nutt
39ccffb28f Nucleo-f402re: Add an option to use only a minimal set of joystick buttons. This eliminates some GPIO conflicts 2014-12-04 10:58:13 -06:00
Gregory Nutt
98b7be3785 Nucleo-f4x1re: Add comments about pin conflicts; Fix GPIO configuration 2014-12-04 10:15:36 -06:00
Gregory Nutt
e6978a72e8 Nucleo-F4x1RE: Fix some joystick shield logic 2014-12-04 09:37:46 -06:00
Gregory Nutt
72041adc9b Nucleo-F4x1RE: Add support for an analog joystick shield. There are still some ADC issues to be worked through as of the initial commit 2014-12-03 16:41:09 -06:00
Gregory Nutt
e1289c5ebc Update README 2014-12-03 15:31:33 -06:00
Gregory Nutt
d4efa9eb9c SAMA5D3 Xplained: A few fixes for the AJoystick driver (still not working) 2014-12-03 14:33:00 -06:00
Gregory Nutt
6574b27abb SAMA5D3 Xplained: Add support for the Itead Joystick shield 2014-12-03 12:24:23 -06:00
Gregory Nutt
68aca6f927 Refresh configuration 2014-12-03 09:37:37 -06:00
Gregory Nutt
b3fd08e568 Correct spelling: MOUNTPOINT not MOUNTPOUNT. Numerous places. Some are problems. From Woohan Lee 2014-12-01 06:41:30 -06:00
Gregory Nutt
49600aeb8b Update README 2014-11-28 18:17:49 -06:00
Gregory Nutt
dc640c0bac STM3210E-EVAL: Add missing initialization for the joystick driver 2014-11-28 15:41:37 -06:00
Gregory Nutt
c6f4fd7480 STM3210E-EVAL: Add a DJoystick driver 2014-11-28 13:31:09 -06:00
Gregory Nutt
1dcbeab4f4 STM3210E-EVAL: Don't treat joystick as buttons if the DJOYSTICK driver is enabled 2014-11-28 12:05:08 -06:00
Gregory Nutt
3627e078bd Refresh configuration 2014-11-28 11:48:48 -06:00
Gregory Nutt
cf5b4b583e STM3210E-EVAL: Rename files for compatibility with current standards 2014-11-28 11:35:47 -06:00
Gregory Nutt
4315b2fdb1 STM3240G-EVAL: Rename files for compatibility with current naming conventions 2014-11-28 11:06:43 -06:00
Gregory Nutt
3e9da671b6 Refresh configuration 2014-11-28 11:05:39 -06:00
Gregory Nutt
c5fa29a1aa LPC4357 EVB: Ooops got sense of the LED GPIO backward 2014-11-27 12:38:04 -06:00
Gregory Nutt
8fa2d01ac3 LPC4357-EVB: Fix LEDs; comment out old unimplemented button stuff 2014-11-27 10:28:32 -06:00
Gregory Nutt
a0fbe36204 Minor change to README file 2014-11-27 09:14:58 -06:00
Gregory Nutt
084e984efb Fix minor typos in C comments 2014-11-27 07:57:32 -06:00
Gregory Nutt
5818744077 Fix replicated typo in most of the newly added lpc4357-evb files 2014-11-26 18:34:00 -06:00
Gregory Nutt
91a422588e Add some discussio of the LPC4357 to documentation and README files 2014-11-26 16:44:25 -06:00
Gregory Nutt
089f7258c6 Misc changes while verifying the clean build of the LPC4357 port 2014-11-26 15:37:54 -06:00
Gregory Nutt
0a57df4410 Initial support for the LPC4357-EVB provided by Toby Duckworth 2014-11-26 15:18:24 -06:00
Gregory Nutt
f6f8575de3 Fix more issues detected by cppcheck 2014-11-25 14:25:02 -06:00
Gregory Nutt
6498e1127e More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
d4b01c55b5 If SAM4E-EK is selected, then configs/Kconfig must select ARCH_PHY_INTERRUPT 2014-11-25 08:08:58 -06:00
Gregory Nutt
2f33fdce85 Nucleo F4x1RE: Stangeness in initialization noted by Sébastien Lorquet 2014-11-24 12:33:24 -06:00
Gregory Nutt
a4b77cfb1c Nucleo F4x1RE: Typos in previously untested code. message() does not exist, return value from void function, missing inclusion of errno.h. From Sébastien Lorquet 2014-11-24 11:29:22 -06:00
Gregory Nutt
f4746a3e9e Fix BAS configuration from last change; refresh STM32 F4 NSH configuration 2014-11-24 09:12:56 -06:00
Gregory Nutt
121aa0ca68 Update comments and README 2014-11-24 07:25:40 -06:00
Gregory Nutt
5ead6b402d Network: Misc changes to UDP bind logic for the case of multiple networks 2014-11-21 17:00:08 -06:00
Gregory Nutt
5055d00caf Update READMEs 2014-11-21 14:05:20 -06:00
Gregory Nutt
12a9937913 apps/examples/bridge: Lots of fixes. I think it is working although I have still have host firewall issues in testing 2014-11-21 10:16:19 -06:00
Gregory Nutt
2f972d2781 apps/examples/bridge: Add host-side test driver 2014-11-21 08:20:25 -06:00
Gregory Nutt
7cea0f5a69 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
972b11d462 Update README 2014-11-20 14:18:30 -06:00
Gregory Nutt
4683ad7843 Refresh STM32F429i Disco USB NSH configuration 2014-11-20 07:55:30 -06:00
Gregory Nutt
13332e41d2 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
4dea8ef794 Freedom K25Z: Fix missing file inclusion in board Makefile. From Alan Carvalho de Assis 2014-11-19 07:17:46 -06:00
Gregory Nutt
471f2bd1b5 Update README 2014-11-18 14:28:27 -06:00
Gregory Nutt
2803545ebc SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
726af630e2 SAMA5D4-EK bridge configuration: Correct configuration -- PHY interfaces are RMII not MII 2014-11-17 17:44:49 -06:00
Gregory Nutt
cb11af9112 Due to limitations in port unique-ness, have to use unique port numbers in apps/examples/bridge for now 2014-11-17 15:40:37 -06:00
Gregory Nutt
b6b4a0cd37 SAMA5D4-EK bridge configuration needs to set software MAC address 2014-11-17 13:16:13 -06:00
Gregory Nutt
16cd0cce81 Update ChangeLog 2014-11-17 12:48:01 -06:00
Gregory Nutt
c0c86da44c Change SAMA5D4-EK bridge configuration so that runs out of DRAM 2014-11-17 12:03:40 -06:00
Gregory Nutt
b3b746c44a configs/sama5d4-ek/bridge: Add a simple test for the dual EMACs on the SAMA5D4 2014-11-17 10:56:02 -06:00
Gregory Nutt
e3920b130f changes for clean build with Ethernet+SLIP 2014-11-16 11:27:53 -06:00
Gregory Nutt
3715040386 Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files 2014-11-16 10:49:33 -06:00
Gregory Nutt
07a74c3cfd Refresh configuration 2014-11-16 09:36:08 -06:00
Gregory Nutt
66f49ae9b4 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all configs/ README.txt files 2014-11-16 08:18:56 -06:00
Gregory Nutt
fa0512a766 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all configuration files 2014-11-16 08:07:16 -06:00
Gregory Nutt
127642d676 Network: Update SLIP configuration; Fix compile issues when building SLIP only 2014-11-15 14:36:49 -06:00
Gregory Nutt
adb497959d STM32F4Discovery netnsh configuration needs to set MAC address 2014-11-15 08:32:12 -06:00
Gregory Nutt
b0fa0a0b98 Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
f4e696f10f ARP: Add support for the case where there are multiple networks: One being Etherenet and the other not (say slip or perhaps someday PPP). In that case, we need to suppress ARP-related operations on the SLIP/PPP interface only 2014-11-14 18:25:33 -06:00
Gregory Nutt
1bae6f4d60 Cosmetic updates; updates to README 2014-11-14 09:54:00 -06:00
Gregory Nutt
dd2fdcb18f EFM32GG-STK3700: Increase LEUART0 baud to 9600; Calibrate delay loop 2014-11-14 06:33:54 -06:00
Gregory Nutt
113c7f25ba merge 2014-11-13 08:43:53 -06:00
Gregory Nutt
39d1e97934 Refresh configuration 2014-11-13 08:40:11 -06:00
Gregory Nutt
d25a3ec157 Update configuration 2014-11-13 08:08:50 -06:00
Gregory Nutt
22ebb20b79 Merge remote-tracking branch 'origin/master' into maxargs 2014-11-13 06:12:20 -06:00
Gregory Nutt
f31dca368b Remove CONFIG_MAX_TASK_ARGS from all Kconfigs and defconfigs 2014-11-12 18:02:19 -06:00
Gregory Nutt
dd03c11874 Update document and README 2014-11-12 14:47:04 -06:00
Gregory Nutt
43281776fe EFM32: Tweaks to get EFM32GG-STK3700 running NSH over LEUART0 2014-11-12 12:50:09 -06:00
Gregory Nutt
2a48a29385 Updates the px4fmu-v2_upstream config using menuconfig. From Lorenz Meier. 2014-11-12 07:38:16 -06:00
Gregory Nutt
1381705258 Update README files 2014-11-11 09:36:33 -06:00
Gregory Nutt
a66a10b891 Refresh configuration 2014-11-10 13:43:43 -06:00
Gregory Nutt
46e45619c0 Remove stm32f100rc_generic board configuration 2014-11-10 07:48:48 -06:00
Gregory Nutt
ed4978da54 Merge remote-tracking branch 'origin/master' into bas24 2014-11-03 17:22:38 -06:00
Gregory Nutt
99d9a10943 STM32GG Starter Kit: Misc bugfixes for clean compile of the NSH configuration 2014-11-03 17:20:03 -06:00
Gregory Nutt
e94aa0558f STM32GG Starter Kit: Add basic NSH configuration 2014-11-03 16:58:22 -06:00
Gregory Nutt
b2755708bc STM32GG Starter Kit: Add Makefile and boot logic 2014-11-03 16:26:55 -06:00
Gregory Nutt
cfbad6f5d8 STM32GG Starter Kit: Add Kconfig and linker script files 2014-11-03 16:22:29 -06:00
Gregory Nutt
92b6c8f325 EFM32GG: Add a few files for the starter kit 2014-11-03 16:13:12 -06:00
Gregory Nutt
b6a6fa7d37 Disable BINFS in the sim/bas config 2014-11-01 17:44:55 -06:00
Gregory Nutt
e27d0bb3dc Remove duplicate getopt() in BAS 2014-11-01 17:16:15 -06:00
Gregory Nutt
bf5d46e746 New version of configs/bas: Runs BAS as an NSH builtin 2014-11-01 16:23:51 -06:00
Gregory Nutt
c19f430632 Back out configs/sim/bas 2014-11-01 15:52:08 -06:00
Gregory Nutt
e4007b7147 Add configs/sim/bas 2014-11-01 15:26:41 -06:00
Gregory Nutt
9fd42cdcfc Update document and README 2014-10-30 10:24:42 -06:00
Gregory Nutt
aed8195155 Fix all yahoo links. From Magnus Templing 2014-10-30 09:39:23 -06:00
Gregory Nutt
adb022054b Fix typo introduced into a Kconfig file in the last few days. Thanks to Sebastien Lorquet 2014-10-30 08:18:58 -06:00
Gregory Nutt
138114dfd5 Remove some dangling whitespace 2014-10-30 06:57:43 -06:00
Gregory Nutt
6090a5a461 Documentation Update 2014-10-30 06:56:30 -06:00
Gregory Nutt
8247bf3e1c SAM4E-EK: Fix an error in USART1 pin number 2014-10-29 17:29:21 -06:00
Gregory Nutt
627e6301e0 EFM32 Gecko Starter Kit: Calibrate delay loops, update README 2014-10-29 12:31:55 -06:00
Gregory Nutt
33f454a011 EFM32 Gecko Starter Kit: Switch to LEUART0 as the default console 2014-10-29 11:43:03 -06:00
Gregory Nutt
e97ef669ed EFM32: Minor serial interrupt mask change; Add LEUART0 board support 2014-10-29 08:04:29 -06:00
Gregory Nutt
714464405d Fix a few more EFM32 integration bugs 2014-10-28 19:02:21 -06:00
Gregory Nutt
2326ea0307 EFM32: Need to configure UART GPIOs as outputs 2014-10-28 14:50:15 -06:00
Gregory Nutt
f8b2f291b4 EFM32: Fix GPIO configuration logic; Add missing board initializatin logic; Fix LED naming 2014-10-28 10:39:57 -06:00
Gregory Nutt
a839463322 EFM32G: Fix typo in memory map header file 2014-10-28 09:26:06 -06:00
Gregory Nutt
8595f421ee EFM32: Correct a typo in LFXO bit in clock configuration 2014-10-28 08:59:27 -06:00
Gregory Nutt
89605a5e78 EFM32: Update a configuration; Compile fix for when DEBUG is enabled 2014-10-28 07:24:04 -06:00
Gregory Nutt
4c36103407 Refresh a configuration 2014-10-28 00:11:40 -06:00
Gregory Nutt
afe6c95da3 Refresh configuration 2014-10-27 13:12:19 -06:00
Gregory Nutt
dd4d482fe2 Rename CONFIG_STM32_HAVE_USARTn to CONFIG_STM32_HAVE_UARTn for n-4,5,7,8 2014-10-27 11:29:43 -06:00
Gregory Nutt
854dbb7d65 SAM4E-EK: Add -fno-strict-aliasing 2014-10-25 15:23:14 -06:00
Gregory Nutt
6c03fd7ad1 EFM32: Correct handling of DMA descriptors; Add initialization of DMA CTRLBASE 2014-10-25 14:55:02 -06:00
Gregory Nutt
b629ab2862 SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
Gregory Nutt
a4dde0c527 Kconfig: Allow select of standard board properties for custom board 2014-10-24 09:57:32 -06:00
Gregory Nutt
e315a6d500 SAM4E: Fix options to select GPIO interrupts in Kconfig 2014-10-24 09:29:01 -06:00
Gregory Nutt
8712d1115c Refresh SAM4E configurations 2014-10-23 10:16:00 -06:00
Gregory Nutt
bdbe5393e1 Add README for non-existent port to the EFM32GG-STK3700; fix typos in related README files 2014-10-22 14:32:25 -06:00
Gregory Nutt
ef4a649372 Add logic to manage BC_EN signal 2014-10-22 14:27:05 -06:00
Gregory Nutt
33015d6018 EFM32: Add buton interrupt handling for the Olimex board 2014-10-21 13:51:30 -06:00
Gregory Nutt
b8d841c9d2 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d39eb3ade7 EFM32: Add LFA and LFB clock support 2014-10-21 10:45:33 -06:00
Gregory Nutt
c688cda22a stm32f429i-disco: add wrapper for spi5 evice 
initializing

As long as the method up_spiinitialize recognized the initialized state of the
spi device by the spi enable flag of the cr1 register, it isn't safe to disable
the spi device outside of the nuttx spi interface structure. But this has to be
done as long as the nuttx spi interface doesn't support bidirectional data
transfer for multiple devices share one spi bus. This wrapper store the
initialized state of the spi device after the first initializing and should be
used by each driver who shares the spi5 bus.

Note! Understand this as temporary workaround.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:36:11 -06:00
Gregory Nutt
4c470720d0 stm32f429i-disco: add new platform config 
This adds a new default platform configuration to support the lcd device
connected to the stm32f429i-disco board.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:33:25 -06:00
Gregory Nutt
bf4ad09e6e stm32f429i-disco: enable usage of ili93414ws 
This enables build and configuration of the ili94314ws sub driver.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:24:24 -06:00
Gregory Nutt
e597d07d42 stm32f429i-disco: implements lcd initializing 
This enables the initializing of the lcd device connected on the
stm32f429i-disco. The following methods are provided:
- up_lcdinitialize
- up_lcduninitialize
- up_lcdgetdev

The corresponding ili9341 lcd device in the nuttx driver section can be
configured by Kconfig. Interface 0 is used by default.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:21:48 -06:00
Gregory Nutt
f02de7c7ec stm32f429i-disco: implements ili9341 interface 
This add a new sub driver ili93414ws which implements the ili9341
interface. This allows to control the ili9341 lcd display of the
stm32f429i-disco board. This also modifies the board specific header to
make the entry point to the sub driver known.

Generally the display supports two different ways to drawing pixel data. This
can be done by RGB interface or MCU interface. Second one is supported by this
driver.

The configuration of the MCU interface is fixed by the hardware pinout.
In the case of the stm32f429i-disco board it is a 4-wire serial (spi)
interface. The display is connected on spi5 and acts as a slave device.
It supports half duplex bidirectional mode for transmitting and receiving data.

Nuttx spi interface only support full duplex so the interface can not be used
for the driver in conventional way. Therefore the driver has its own logic for
the communication with the spi5 device.

But if multiple devices share the same spi5 bus, e.g. if MEMS support enabled
the spi bus must be locked to avoid inconsistency. This is done by enable
CONFIG_STM32_SPI5 in the nuttx configuration. In this case the driver uses the
spi_dev_s instance for the spi5 port to interact with the nuttx spi interface,
e.g. using method SPI_LOCK to lock the bus for the current usage. So it is safe
to share the spi bus. Keep in mind this is a possible workaround.
I would be happy if nuttx spi interface supports different spi modes other
than full duplex only. Are there any plans?

Futhermore the driver supports a few configurable settings:

1. SPI Frequency.

This allows to configure the spi frequency for the communication with the
display. As a result of the spi devices of the stm32f429 only allow fixed
frequency by divider depending on PCLK1, it is not possible to configure each
spi clock we want. A divider of 4, what means ~10Mhz spi clock, gives me the
best results and should be near the upper limit.

2. SPI 16-bit mode.

This allows to setup the spi hardware to 16-bit mode for read or write
operations when receiving or transmitting pixel data from or to the gram of the
display. This is not documented in the ili9341 reference manual but this trick
works just fine because we use only one read or write operation for each pixel,
instead two. This gives a small performance boost.

The driver implements all functions described in the header (see
include/nuttx/lcd/ili9341.h).
Note! Using the backlight function has no effect, because the board
doesn't support controlling of the backlight in the current hardware
layout.

Todo: Add support for dma transfer for writing pixel data to the displays gram.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:17:56 -06:00
Gregory Nutt
3035f1a88f stm32f429i-disco: Fix obsolete SPI5 dependency. From Marco Krahl 2014-10-20 15:10:50 -06:00
Gregory Nutt
94f5d3427d Update README files 2014-10-20 15:08:35 -06:00
Gregory Nutt
468b004fcb Add board support for the Olimex EFM32G8809128 STK 2014-10-20 12:00:37 -06:00
Gregory Nutt
fbaa55e416 EFM32 Gecko Starter Kit: Must initialize LEDs on boot 2014-10-20 11:52:31 -06:00
Gregory Nutt
ea3024c529 Merge branch 'efm32' 2014-10-20 08:15:53 -06:00
Gregory Nutt
180c0e9dec Add some UART configuration logic (still incomplete) 2014-10-19 16:42:15 -06:00
Gregory Nutt
4d6f0a7708 Basic clock configuration logic 2014-10-19 11:08:56 -06:00
Gregory Nutt
17403fe074 Add frame for EFM32 GPIO logic (empty functions) 2014-10-18 18:40:08 -06:00
Gregory Nutt
5842b5d705 Need to enable the standard serial driver for NSH 2014-10-18 16:15:14 -06:00
Gregory Nutt
192ef77d68 Use UART0 for the serial console 2014-10-18 12:47:45 -06:00
Gregory Nutt
d707a29c35 Add board XTAL definitions 2014-10-18 12:07:34 -06:00
Gregory Nutt
d359e4bf3f Add EFM32 CMU header file 2014-10-18 09:26:56 -06:00
Gregory Nutt
b327a408a4 Add EFM32 Memory Maps 2014-10-17 16:43:52 -06:00
Gregory Nutt
fcdc23a6a7 Add GPIO header file and EFM32 Gecko Starter Kit LED support 2014-10-17 14:17:44 -06:00
Gregory Nutt
cee68cc44e More EFM32 files and logic 2014-10-17 12:02:32 -06:00
Gregory Nutt
84f26a3d07 Add EFM32 interrupt vector defintions 2014-10-17 10:34:39 -06:00
Gregory Nutt
b41dd463f2 Add configuration support for the EFM32 Gecko Starter Kit 2014-10-17 09:25:52 -06:00
Gregory Nutt
df822a66c2 Add directory for EFM32 G8XX STK board 2014-10-17 08:43:06 -06:00