sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7,806 Commits 1 Branch 0 Tags 291 MiB
d730b4d983
Commit Graph

2354 Commits

Author SHA1 Message Date
Gregory Nutt
3240383133 The SAM4S Xplained Pro now uses the extended timer/counter features. From Bob Doiron. 2014-04-30 14:11:53 -06:00
Gregory Nutt
020583efa2 drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn. 2014-04-30 13:31:42 -06:00
Gregory Nutt
7857d716b5 Nucleo-F401RE: Fix memory usage 2014-04-30 08:20:30 -06:00
Gregory Nutt
f25d69ff9a Sourceforge patch #40. Fix some conditional logic in clock configuration. From Luciano Neri 2014-04-29 11:32:33 -06:00
Gregory Nutt
7633031713 Updated changelogs and release notes in preparation for the 7.2 release. Still need to do a little more before the release 2014-04-28 10:02:19 -06:00
Gregory Nutt
33ddbeab16 STM32: More places where up_prioritize_irq is called when CONFIG_ARCH_IRQPRIO is not defined. Sourceforge ticket #26 2014-04-28 07:07:47 -06:00
Gregory Nutt
87c78d61bc Sourceforge ticket #26: STM32 up_prioritize_irq should not be called if CONFIG_ARCH_IRQPRIO is not defined 2014-04-25 16:23:00 -06:00
Gregory Nutt
7ee0706bc1 ZNeo: Calculation of timer reload and prescaler was wrong 2014-04-25 15:38:00 -06:00
Gregory Nutt
ff103e9d4c Nucleo: Remove bogus MPU definitions 2014-04-25 08:52:50 -06:00
Gregory Nutt
bdf4a991aa STM32 dmapreflight method must be conditioned on CONFIG_SDIO_PREFLIGHT. From Pelle Windestam 2014-04-25 07:22:14 -06:00
Gregory Nutt
e887473bde ZNEO: Add ESPI driver 2014-04-24 12:52:34 -06:00
Gregory Nutt
465bfcb4cf Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
Gregory Nutt
61555fe5e1 Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin 2014-04-22 09:01:20 -06:00
Gregory Nutt
61e80ae998 SAM4S Xplained Pro: Watchdog timer support for Bob Doison 2014-04-21 19:19:56 -06:00
Gregory Nutt
da66bc6434 SAM3/4: Add watchdog timer support. From Bob Doisin 2014-04-21 19:10:06 -06:00
Gregory Nutt
c033ec399f SAM4S Xplained: Boot PPLLA to 2450MHz to support USB 2014-04-21 18:15:55 -06:00
Gregory Nutt
c4d5a30824 SAM4S Xplained Pro: Added card detect, automout procfs. From Bob Doison 2014-04-21 17:49:40 -06:00
Gregory Nutt
f2d25cadf0 Support for the Atmel SAM4S Xplaiend Board from Bob Doison 2014-04-21 17:34:05 -06:00
Gregory Nutt
9aef2435d4 SAM3/4: Support for PDC based HSMCI ADMA from Bob Doiron 2014-04-21 17:18:30 -06:00
Gregory Nutt
5d7da97a35 SDIO-based MMC/SD improvements from Bob Doiron 2014-04-21 17:15:42 -06:00
Gregory Nutt
c0f27d8aa6 SAM4S: Fix error in macro that disabled peripheral clocking. From Bob Doiron 2014-04-21 17:06:01 -06:00
Gregory Nutt
f7dbe4b970 SAM3/4 RTC driver from Bob Doiron 2014-04-21 17:03:57 -06:00
Gregory Nutt
d53c3a2090 Add support for the STM32F041RE and for the Nucleo-F401RE board. From Frank Bennett 2014-04-20 13:42:23 -06:00
Gregory Nutt
e50b2b0760 Add IEEE 695 OMF header file 2014-04-19 18:30:58 -06:00
Gregory Nutt
b0c493685a zkit-arm-1769: Refreshed all configurations 2014-04-19 09:18:38 -06:00
Gregory Nutt
8e3680ec22 olimex-lpc1766stk: Refreshed all configurations 2014-04-19 09:00:53 -06:00
Gregory Nutt
dfdc2c4e31 lpcxpresso-lpc1768: Refreshed all configurations 2014-04-19 08:51:55 -06:00
Gregory Nutt
6a3a766b00 LPC17xx: Prioritized interrupts are not supported (although hooks are present to prioritize interrupts). Make LPC17 Ethernet default priority to be the system default, not the highest. If the unsupported feature is enabled, then at least it should do no harm 2014-04-19 07:56:59 -06:00
Gregory Nutt
4e72f42468 LPC17xx, TIVA, and Kinetis interrupt initialization: use the NVIC ICTR register to determine how many interrupt lines/registers are supported by the MCU 2014-04-17 14:51:53 -06:00
Gregory Nutt
9485fbf66e SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly 2014-04-17 14:02:22 -06:00
Gregory Nutt
b83702dd8a HID mouse: Don't include NAKs in error count. From Leo 2014-04-17 11:47:00 -06:00
Gregory Nutt
6d0863b657 Add logic to register HID keybaord and mouse classes; fix some conditional compilation. From Leo 2014-04-17 11:22:46 -06:00
Gregory Nutt
75e61f4b69 STM32 OTGFS Host: Changes from Leo for low-speed devices and interrupt endpoints 2014-04-17 10:52:27 -06:00
Gregory Nutt
2f3fa3cbdc SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t 2014-04-17 10:01:15 -06:00
Gregory Nutt
c6d70e29bc SAMA5 EMAC: Missing right parens from last change. Noted by Luciano Neri 2014-04-17 09:02:55 -06:00
Gregory Nutt
3133ebfcee Move the un-definitions of __ramfuncs__ from the sam_clockconfig.c to the common up_internal.h header file so that the attribute will be applied the same to function definitions and prototypes. 2014-04-17 08:56:20 -06:00
Gregory Nutt
80cded4e3e STM32 F2: Fix SPI2 MOSI pin mapping. From dlsitzer 2014-04-16 12:35:33 -06:00
Gregory Nutt
f58767ce79 MIO183QT-9A LCD driver updated to support reading from the LCD. From Toby Duckwork 2014-04-16 12:17:35 -06:00
Gregory Nutt
dc3ef08a66 SAMA5 TWI: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 12:09:55 -06:00
Gregory Nutt
bf2bb55aac SAMA5 SSC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 10:58:23 -06:00
Gregory Nutt
1e35f1730d SAMA5 EMAC/GMAC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 10:13:08 -06:00
Gregory Nutt
1927c147be SAMA5 CAN: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 10:00:32 -06:00
Gregory Nutt
1b46ebc7f4 SAMA5 ADC: If running from SDRAM, BOARD_MCK_FREQUENCY is not a constant and cannot be used in pre-processor conditionals 2014-04-16 09:42:07 -06:00
Gregory Nutt
218554dc9d STM32 OTGFS: Host USB tracing instrumentation added by Leo 2014-04-12 08:44:22 -06:00
Gregory Nutt
cd6039933e SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane. 2014-04-11 15:57:35 -06:00
Gregory Nutt
d128b47c71 SAMA5 TWI: Number of bytes transferred not be incremented on the first byte. From David Sidrane 2014-04-10 18:19:03 -06:00
Gregory Nutt
c208b25f89 Add some checks: if getpid() or get_errno_ptr() are called very early in the initialization sequence, they would fail 2014-04-10 10:20:44 -06:00
Gregory Nutt
2fcc57edb0 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
6be62a7ef3 configs/*/defconfig: Increase the number of pre-allocated watchdogs in configurations that use networking or USB 2014-04-09 10:57:56 -06:00
Gregory Nutt
6578d646da Back out part of 610e2aa0c224e2936fe8009ef4a2351ce607067a: Need to be able to select USB console devices when there is no /dev/console enabled. Noted by Librae 2014-04-08 11:04:25 -06:00
Gregory Nutt
c306884d84 Add logic for TM4C125GXL clocking based on prototype from from Daniel Carvalho with modifications. I think the LM4F120 may have broken before as well(?). In any event, the LM4F120 also works well with this chanage 2014-04-07 15:32:13 -06:00
Gregory Nutt
177cb595d5 SAMA5 UDPHS: Fix error where bit was not cleared to acknowledge receipt of data and to setup for the next incoming data 2014-04-06 13:13:31 -06:00
Gregory Nutt
781f2804ee SAMA5: Don't use MMU PMD bufferable bit to try to control write-through vs write-back. It does not work that way 2014-04-04 16:05:20 -06:00
Gregory Nutt
5eeb9f97fc Fix a build error when only USB device tracing is enabled (from David Sidrane). Also an update to the USB tracing document 2014-04-04 08:56:10 -06:00
Gregory Nutt
2efc4d6396 SAMA5: On some hardware, reconfiguring the PLL while executing out of NOR FLASH causes crashes. This was fixed by David Sidrane by implementing RAM functions. The killer code is copied and executed from ISRAM and the crash is avoided. 2014-04-03 16:08:18 -06:00
Gregory Nutt
b884ab50f4 SAMA5: Fix SAMA5 so that interpretation of BMS bit is correct. From David Sidrane 2014-04-03 15:47:34 -06:00
Gregory Nutt
048230fb94 SAMA5: When booting from SDRAM, don't copy vectors to ISRAM. Instread just set the VBAR register to add address of the vectors in SDRAM 2014-04-03 14:09:11 -06:00
Gregory Nutt
11c7386dab SAMA5: Make sure the MMU and caches are disabled on power up; flush the vector region D-Cache after copying interrupt vectors; make sure that D-Cache, I-Cache, and TLBs are invalidated after modifying the AXI MATRIX remapping 2014-04-02 16:27:00 -06:00
Gregory Nutt
16c4ea72ec SAMA5: When running from SRAM, vectors must lie in ISRAM 2014-04-02 12:54:15 -06:00
Gregory Nutt
ed294643bd sscanf: Use stroul() vs strol() for %u format. From kfrolov 2014-04-02 09:15:40 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
a29187bd34 SAMA5: Add DBGU register definition header file 2014-03-31 17:25:16 -06:00
Gregory Nutt
a44a4444e2 Cosmetic updates to comments and README files 2014-03-31 15:10:15 -06:00
Gregory Nutt
70815e5673 sched/Kconfig: Add another layer of menuing to simply this level 2014-03-31 11:32:22 -06:00
Gregory Nutt
4f59bc5878 Add CONFIG_CLOCK_MONTONIC 2014-03-31 10:01:03 -06:00
Gregory Nutt
68025784b0 Fix ftell() bug: It was not accounting for data buffered in memory. From Macs N 2014-03-31 09:47:28 -06:00
Gregory Nutt
cd135fe3a8 Complete fragmentary support for ferror(). From Macs N 2014-03-31 09:39:10 -06:00
Gregory Nutt
8772a4e104 Add support for CLOCK_MONOTONIC. From Macs N 2014-03-31 09:25:50 -06:00
Gregory Nutt
6bb8cc02df sscanf(): Was returning the wrong number of conversions in many cases; Also, needs to return EOF if there were no conversions 2014-03-30 14:24:38 -06:00
Gregory Nutt
d14940a375 Fix some backward conditional compilation 2014-03-30 08:29:21 -06:00
Gregory Nutt
ec60f6cd9d SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file 2014-03-30 08:00:59 -06:00
Gregory Nutt
060b84240b Add macro UNUSED to eliminate warnings about variables that are set to unused values 2014-03-30 07:58:58 -06:00
Gregory Nutt
392031ff7c SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards 2014-03-30 07:26:38 -06:00
Gregory Nutt
aac2a6759d SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency 2014-03-29 17:51:06 -06:00
Gregory Nutt
1b6ae2ccbb SAMA5: Add functions to calculate PLLACK, PCK, and MCK frequencies given the main clock frequency 2014-03-29 15:54:10 -06:00
Gregory Nutt
09fb2a1893 Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished) 2014-03-28 15:20:26 -06:00
Gregory Nutt
085d7dfe34 Add support for the SAMA5D36 2014-03-28 08:33:01 -06:00
Gregory Nutt
a37c158659 Add missing MIO283QT-9A to the drivers/lcd/Kconfig 2014-03-27 07:38:02 -06:00
Gregory Nutt
942c6e0e44 SAM4E-EK: CMCC is enabled in all configurations and delay loop has been calibrated 2014-03-26 17:07:08 -06:00
Gregory Nutt
63af8d88fb SAM4E-EK: All configurations converted to run with 120MHz CPU clock 2014-03-26 14:03:33 -06:00
Gregory Nutt
135b6b0ca2 SAM3/4: SPI and HSCMI drivers with now use the CMCC is available; The SPI driver will now handle word sizes greater than 8-bits 2014-03-26 13:19:44 -06:00
Gregory Nutt
3f4593dda8 SAM4E USP: Re-vamp read request queue handling. Add logic to handle RX overrun errors 2014-03-26 11:38:47 -06:00
Gregory Nutt
f6dedaee30 tools/astyle.sh: Formatting tool based on logic from Lorenz Meier 2014-03-26 08:50:48 -06:00
Gregory Nutt
b951732a2b Reimagine the USB MSC worker thread as a kernel thread (instead of a pthread) 2014-03-25 14:19:27 -06:00
Gregory Nutt
03bd2a6ad9 Add missing HSCMI configuration options; Make HSMCI configuration naming more compatible; Fix HSCMI clocking to use the CLKODD bit 2014-03-24 14:25:40 -06:00
Gregory Nutt
4702536695 net/: IGMP-related bugfixes from Manuel Stühn 2014-03-24 09:34:17 -06:00
Gregory Nutt
7d3d1f79bb STM32 EMAC: Add support for IGMP hash table update. From Manuel Stühn 2014-03-24 09:32:48 -06:00
Gregory Nutt
f066b87828 SAM4E-EK: Add an NSH configuration that uses a USB CDC/ACM console 2014-03-22 09:27:43 -06:00
Gregory Nutt
baa91448e6 net/netdev_findbyaddr.c: Skip network devices that are in the down state. They have no meaning address 2014-03-20 17:27:59 -06:00
Gregory Nutt
c6127ad09d If DCD supports queuing of stall requests then USB MSC delay work-around is not necessary 2014-03-20 15:20:24 -06:00
Gregory Nutt
a2d53bf950 Add option to dump buffered USB trace data on an assertion 2014-03-20 10:56:30 -06:00
Gregory Nutt
3c7021477d nuttx/include/nuttx/i2c.h typo fixes drom Vijay Kumar 2014-03-19 08:42:42 -06:00
Gregory Nutt
34467249b5 Improved description of CONFIG_ARMV7M_USEBASEPRI from Vijay Kumar 2014-03-19 07:16:44 -06:00
Gregory Nutt
3c371a290d Typo fixes to NuttX porting guide from Vijay Kumar 2014-03-18 07:41:16 -06:00
Gregory Nutt
e869de4272 SAM4E: Add USB full speed device (UDP) driver 2014-03-17 12:37:55 -06:00
Gregory Nutt
f15a6e2330 Prep for NuttX 7.1 release 2014-03-15 10:05:18 -06:00
Gregory Nutt
4d34848389 SAM4E-EK: NSH configuration now has DMA-based SPI and AT25 Serial FLASH suported enabled by default 2014-03-14 12:35:17 -06:00
Gregory Nutt
e2ab7d8a33 SAM3/4 DMA fixes in general for SPI DMA in particular 2014-03-14 11:25:16 -06:00
Gregory Nutt
dba6cca886 SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work. 2014-03-13 15:54:09 -06:00
Gregory Nutt
7e16cee6b5 Backport SPI driver enhancements from SAMA5 to SAM3/4 2014-03-13 10:34:35 -06:00
Gregory Nutt
0bd5f23a30 SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default 2014-03-13 09:03:03 -06:00
Gregory Nutt
5a0100aef4 SAM4E: Add support for the Cortex-M Cache Control block 2014-03-12 12:38:39 -06:00
Gregory Nutt
3bb6c2fd57 TM4C: Fix typos in memory map reported by Daniel Pereira de Carvalho 2014-03-12 07:23:58 -06:00
Gregory Nutt
da8a0e8062 Refresh spark configurations 2014-03-11 10:43:14 -06:00
Gregory Nutt
99d2f3a993 SAM4E-EK: Add basic board support 2014-03-10 15:18:46 -06:00
Gregory Nutt
75bda40eb6 Add basic board support for the TM4C123G Launchpad 2014-03-10 11:25:06 -06:00
Gregory Nutt
51674e0c51 TM4C: Add SYSCONTROL register defintion header file 2014-03-10 10:17:37 -06:00
Gregory Nutt
59b5802882 TIVA: Add memory map for the TM4C123 2014-03-09 13:57:35 -06:00
Gregory Nutt
cce52d75ed Add pin multiplex definitions for the TM4C123 2014-03-09 13:15:09 -06:00
Gregory Nutt
f2fd4df587 Refresh all LM3/4/Tiva configurations 2014-03-09 07:59:09 -06:00
Gregory Nutt
7c55ba4115 All files and functions beginning with lm_ changed to tiva_ 2014-03-08 13:29:09 -06:00
Gregory Nutt
32f8f33653 The old lm/ directories were enamed tiva/ to better support new products coming down the pipe from TI 2014-03-08 12:31:06 -06:00
Gregory Nutt
7231b0b1e5 LPC2378: I2C driver from Lizhuoyi 2014-03-08 11:03:58 -06:00
Gregory Nutt
6dd1217bf9 QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi 2014-03-08 09:24:24 -06:00
Gregory Nutt
6b068754a0 configs/pic32-starterkit, pic32mx7mmb, stm3210e-eval, stm3220g-eval, and stm3240g-eval: Refresh all configurations with the latest Kconfig files 2014-03-07 11:47:07 -06:00
Gregory Nutt
a7b9c967b0 Update NuttShell.html per recommendations from Max Kriegleder 2014-03-06 17:47:07 -06:00
Gregory Nutt
eb132f256c Refresh configuration files 2014-03-06 17:16:46 -06:00
Gregory Nutt
bd8a0aec21 Refresh several defconfig files to (1) bring them up-to-date, and (2) to confirm that no bugs were introduced in recent massive Kconfig file changes 2014-03-06 16:02:18 -06:00
Gregory Nutt
113d5a2a81 Correct an error introduced in this file in very recent commits 2014-03-06 15:33:02 -06:00
Gregory Nutt
4cbdbc875e Support for the older, manual configurations has been completely removed from the NuttX build system 2014-03-06 13:00:50 -06:00
Gregory Nutt
e871f36d13 configs/rgmp/x86/cxxtest: Configuration converted to use the kconfig-frontends tools. This completes the conversion of all configurations to the newer format 2014-03-06 12:02:43 -06:00
Gregory Nutt
ecbd6cde75 configs/rgmp/x86/helloxx: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:57:55 -06:00
Gregory Nutt
cab35c579a configs/rgmp/x86/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:53:26 -06:00
Gregory Nutt
4bbbe80a31 configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:47:16 -06:00
Gregory Nutt
2993bd108d configs/rgmp/arm/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:28:29 -06:00
Gregory Nutt
29a4ca8f08 configs/rgmp/arm/default: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:19:05 -06:00
Gregory Nutt
60f5acf8da configs/pjrc-8051: Configuration converted to use the kconfig-frontends tools 2014-03-06 10:27:52 -06:00
Gregory Nutt
ca916b1060 onfigs/mx1ads/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:48:25 -06:00
Gregory Nutt
d5fbc4eeac configs/us7032evb1/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:21:10 -06:00
Gregory Nutt
17a96f6e1e configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:17:11 -06:00
Gregory Nutt
86d7618733 configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 08:28:49 -06:00
Gregory Nutt
d1257082f3 NXFFS: Missing call to nxffs_freeentry() caused a memory leak 2014-03-06 08:01:56 -06:00
Gregory Nutt
79f8b6928a configs/ne64badge/ostest and demo9s12nec64/ostest: Configurations onverted to use the kconfig-frontends tools 2014-03-05 17:27:58 -06:00
Gregory Nutt
72164cb176 Use common naming for rest of the toolchains too 2014-03-05 16:29:58 -06:00
Gregory Nutt
79dc48a71a Use common naming for all buildroot toolchains 2014-03-05 15:37:07 -06:00
Gregory Nutt
9e12be2129 configs/qemu-i486/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-05 14:42:54 -06:00
Gregory Nutt
ba49e3f29a configs/qemu-i486/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-05 14:36:35 -06:00
Gregory Nutt
5c1d6d7580 configs/ea3131/pgnsh: Configuration converted to use the kconfig-frontends tools 2014-03-05 14:26:30 -06:00
Gregory Nutt
6f3f870d31 configs/ntosd-dm320/uip: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:57:49 -06:00
Gregory Nutt
5d639014d7 configs/ntosd-dm320/udp: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:48:58 -06:00
Gregory Nutt
fe913b3140 configs/ntosd-dm320/thttpd: Configuration converted to use the kconfig-frontends tool 2014-03-05 12:34:59 -06:00
Gregory Nutt
ae9ea64ab4 configs/ntosd-dm320/poll: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:29:24 -06:00
Gregory Nutt
57f8ddb453 configs/ntosd-dm320/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:23:39 -06:00
Gregory Nutt
a2a3f80120 configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:16:02 -06:00
Gregory Nutt
5f7987a9b7 configs/avr32dev1/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-05 11:34:25 -06:00
Gregory Nutt
22fbd809e4 configs/avr32dev1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-05 11:26:26 -06:00
Gregory Nutt
87032960cb configs/teensy/nsh: Configuration converted to use the kconfig-frontends tools 2014-03-05 09:40:58 -06:00
Gregory Nutt
d108ba6a56 configs/teensy/hello: Configuration converted to use the kconfig-frontends tool 2014-03-05 09:35:35 -06:00
Gregory Nutt
82e97eaa8f configs/micropendous3/hello: Configuration converted to use the kconfig-frontends tools 2014-03-05 09:28:00 -06:00
Gregory Nutt
79f0509ce5 configs/amber/hello: Configuration converted to use the kconfig-frontends tools 2014-03-05 09:22:50 -06:00