net/utils: return from net_breaklock() was being clobbered.
net/: Replace all calls to iob_alloc() with calls to net_ioballoc() which will release the network lock, if necessary.
net/utils, tcp, include/net: Separate out the special IOB allocation logic and place it in its own function. Prototype is available in a public header file where it can also be used by network drivers.
net/utils: net_timedwait() now uses new net_breaklock() and net_restorelock().
This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU.
The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's.
Squashed commit of the following:
Trivial update to fix some spacing issues.
net/: Rename several macros containing _MTU to _PKTSIZE.
net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
Fix a few typo/compilation problems.
net/: Remove all CONFIG_NET_xxx_TCP_RECVWNDO configuration variables. They were used only to initialize the d_recwndo of the network device structure which no longer exists.
net/: Remove the device TCP receive window field (d_recvwndo) from the device structure. That value is no longer retained, but is calculated dynamically.
Remove some dangling references to CONFIG_NET_TCP_RWND_CONTROL.
net/tcp: Take read-ahead throttling into account when calculating the TCP receive window size.
net/tcp: tcp_get_recvwindow() now returns the receive window size directly (vs. indirectly via the device structure).
net/tcp: Remove CONFIG_NET_TCP_RWND_CONTROL. TCP window algorithm is now trigged only by CONFIG_NET_TCP_READAHEAD.
net/netdev: Add implementation of if_nametoindex() and if indextoname().
net/pkt: Raw AF_PACKET sockets now depend on CONFIG_NETDEV_IFINDEX.
net/procfs: Tweak to handle traversal of interfaces if CONFIG_NETDEV_IFINDEX is not defined.
net/netdev.h: Update netdev_findbyaddr() to use the assigned device index.
Trivial typo fix
net/netdev: Add support for assigned an interface index to a device when it is regisgtered.
Squashed commit of the following:
sched: Rename all use of system_t to clock_t.
syscall: Rename all use of system_t to clock_t.
net: Rename all use of system_t to clock_t.
libs: Rename all use of system_t to clock_t.
fs: Rename all use of system_t to clock_t.
drivers: Rename all use of system_t to clock_t.
arch: Rename all use of system_t to clock_t.
include: Remove definition of systime_t; rename all use of system_t to clock_t.
This commit adds logic to first check for UDP connection mode. If the UDP socket is connected, then the NULL 'to' address is ignored and saved connection address is used instead.
sixlowpan: Preserve big-endian (network order) when uncompressing address.
This change is the counterpart to another recent endianness fix that occurred on compression of the ip address.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
In connection-mode UDP sockets, a remote address is retained in the UDP connection structure. This determines both there send() will send the packets and which packets recv() will accept.
This same mechanism is used for connection-less UDP sendto: A temporary remote address is written into the connection structure to support the sendto() operation. That address persists until the next recvfrom() when it is reset to accept any address.
When UDP read-ahead buffering is enabled, however, that means that the old, invalid remote address can be left in the connection structure for some time. This can cause read-ahead buffer to fail, dropping UDP packets.
Shortening the time between when he remote address is reset (i.e., immediately after the sendto() completes) is not a solution, that does not eliminate the race condition; in only makes it smaller.
With this change, a flag was added to the connection structure to indicate if the UDP socket is in connection mode or if it is connection-less. This change effects only UDP receive operations: The remote address in the UDP connection is always ignored if the UDP socket is not in connection-mode.
No for connection-mode sockets, that remote address behaves as before. But for connection-less sockets, it is only used by sendto().
Squashed commit of the following:
Author: Gregory Nutt <gnutt@nuttx.org>
include/nuttx/wireless/ieee80211: Cosmetic, coding standard changes from review of last merge.
drivers/wireless/ieee80211: Cosmetic, coding standard changes from review of last merge.
configs/photon: Cosmetic, coding standard changes from review of last merge.
arch/arm/src/stm32: SDIO changes from last review: Fix a few long lines and other coding standard issues; Make additions for SDIO card support dependent on a configuration option.
Author: hhuysqt <hyq9606@126.com>
Return IEEE 802.11 MAC address just as ethernet does
Modifyed bcmf_board_setup_oob_irq declaration
Modified OOB ISR function types
Add some logic according to WICED SDK
Bug fixed: data_offset counts in 4-bytes
Add BCM43438 logic for future developement
Add tips on using telnet
Use SDIO in-band interrupt instead of OOB interrupt, because Photon seems to unconnect the OOB interrupt line...
add SDIO in-band interrupt logic
Squashed commit of the following:
wireless/bluetooth: Some small changes that gets to a clean compile by just eliminating some incorrect implementations (still with a lot of warnings. The logic is still incomplete but now not so lethal.
wireless/bluetooth: Restructuring: Connection interfaces should internal to wireless/bluetooth. include/nuttx/wireless/bt_conn.h removed and merged with wireless/bluetooth/bt_conn.h. Several fix to get closer to bt_netdev.c compiling. Need to design some not interfaces and use some existing interfaces to send and receiv packets.
wireless/bluetooth: Some organization with some network device compile errors fixed. Still not even close to compiling.
net/bluetooth: Fix numerous compile issues; Still open design issues with regard to the interface with the Bluetooth stack.
wireless/bluetooth: Create bt_netdev.c with a crude copy of mac802154_netdev.c. Does not not even compile yet.
include/nuttx/net: Add bluetooth.h. Content is not yet correct.
net/netpackets: Add bluetooth.h. Update net/bluetooth to use new socket address definition.
net/bluetooth: Some fixes for initial build.
net/bluetooth: Add initial support for Bluetooth sockets. The initial cut is just the a clone of the IEEE 802.15.4 socket support with name changes.
net/ieee802154: Fix some typos noted when cloning to create net/bluetooth.
Fix SMP related bugs
* sched/sched: Fix a deadlock in SMP mode
Two months ago, I introduced sched_tasklist_lock() and
sched_tasklist_unlock() to protect tasklists in SMP mode.
Actually, this change works pretty well for HTTP audio
streaming aging test with lc823450-xgevk.
However, I found a deadlock in the scheduler when I tried
similar aging tests with DVFS autonomous mode where CPU
clock speed changed based on cpu load. In this case, call
sequences were as follows;
cpu1: sched_unlock()->sched_mergepending()->sched_addreadytorun()->up_cpu_pause()
cpu0: sched_lock()->sched_mergepending()
To avoid this deadlock, I added sched_tasklist_unlock() when calling
up_cpu_pause() and sched_addreadytorun(). Also, added
sched_tasklist_lock() after the call.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* libc: Add critical section in lib_filesem.c for SMP
To set my_pid into fs_folder atomically in SMP mode,
critical section API must be used.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* mm: Add critical section in mm_sem.c for SMP
To set my_pid into mm_folder atomically in SMP mode,
critical section API must be used.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* net: Add critical section in net_lock.c for SMP
To set my pid (me) into fs_folder atomically in SMP mode,
critical section API must be used.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
net/tcp: Add logic to send probes when SO_KEEPALIVE is enabled.
net/tcp: TCP socket should not have to be connected to configure KeepAlive.
net/: Add a separate configuration to enable/disable KEEPALIVE socket options.
net/tcp: Arguments to TCP keep-alive timing functions probably should be struct timeval as are the times for other time-related socket options.
net/tcp: Fix a backward conditional
net/tcp: Add some more checks and debug output to TCP-protocol socket options.
net/tcp: Cosmetic changes to some alignment.
net/: Adds socket options needed to manage TCP-keepalive and TCP state machine logic to detect if that the remote peer is alive. Still missing the timer poll logic to send the keep-alive probes and the state machine logic to respond to probes.
binfmt/, configs/, grahics/, libc/, mm/, net/, sched/: OS references to the errno variable should always use the set_errno(), get_errno() macros
arch/arm/src/stm32 and stm32f7: Architecture-specific code is not permitted to modify the errno variable. drivers/ and libc/: OS references to the errno variable should always use the set_errno(), get_errno() macros
Squashed commit of the following:
net/udp: Address most of the issues with UDP write buffering. There is a remaining issue with handling one network going down in a multi-network environment. None of this has been test but it is certainly ready for test. Hence, the feature is marked EXPERIMENTAL.
net/udp: Some baby steps toward a corrected write buffering design.
net/udp: Remove pesky write buffer macros.
Eliminate trailing space at the end of lines.
net/udp: A little more UDP write buffering logic. Still at least on big gaping hole in the design.
net/udp: Undefined CONFIG_NET_SENDTO_TIMEOUT.
net/udp: Crude, naive port of the TCP write buffering logic into UDP. This commit is certainly non-functional and is simply a starting point for the implementatin of UDP write buffering.
net/udp: Rename udp/udp_psock_sendto.c udp/udp_psock_sendto_unbuffered.c.
fs: Add truncate() support for userfs
fs/unionfs: Add truncate() support to the unionfs
fs/tmpfs: Add ftruncate() support to tmpfs
syscall/: Add system call support for ftruncate()
net/route: Adding ftruncate() support eliminates an issue in file-based routing table management.
fs: Add basic framework to support truncate() and ftruncate(). The infrastructure is complete. Now, however, the actual implementation of ftruncate() will have to be done for each file system.
net/tcp: Introduce tcp receive window control based on I/O buffer
NOTE: The algorithm is still experimental but useful for http streaming.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
sixlowpan: Support sending to a router that is on-link and may be able to forward the packet for us if the destination is not reachable directly
Approved-by: Gregory Nutt <gnutt@nuttx.org>
As a policy, all internal OS implementations must use "detached" files which are valid in any context and do not depend on the validity of a file descriptor at any point in time. This commit converts the usage of file descriptors to detached files throughout the local socket implementation.
Squashed commit of the following:
net/local: Finish change to eliminate use of file descriptors.
net/local: A little more of the conversion.
net/local: Beginning of chnages to eliminate use of file descriptors in the local socket implementeation. poll() will be a problem.
ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology
* mac802154: Adds missing breaks from case statement
* sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast
* ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC
* Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS
* xbee_netdev: Network must be locked when calling sixlowpan_input
* sixlowpan: Reassembly buffer can't be freed if provided by radio driver
* sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver
* ieee802154: Adds basic logging to ieee802154_primitive.c
* Minor fixes after rebase
* xbee: Adds AT query timeout to retry if XBee doesn't respond to request
* same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice'
* mac802154: Removes unused function declaration
* drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator
* mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places.
* mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled.
* sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized.
* sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address
* net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well.
* configs/same70-xplained: Simple spelling fix
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
net/icmpv6: IPPROT_ICMP6 socket logic now builds without error.
net/icmpv6: Add support for read-ahead and poll(). Initial commit is just cloned from ICMP with the appropriate name changes.
configs/: All defconfig filess that include CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and deselect CONFIG_DISABLE_POLL.
Update NSH documention to show that ping6 is now a built in command.
net/icmpv6: Add icmpv6_sendto.c and icmpv6_recvfrom.c. Initial versions are just clones from icmp/ with appropriate name changes.
net/icmpv6: Clone some ICMP socket logic as the beginning of support for ICMPv6 socket support.
Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET. Move prototype for icmpv6_ping from include/nuttx/net/icmpv6 to net/icmpv6/icmpv6.h
Squashed commit of the following:
net/icmp: Finishes off icmp_recvfrom().
net/icmp: Add readahead support for IPPROTO_ICMP sockets.
net/icmp: Add poll() support for IPPROTO_ICMP sockets.
net/icmp: Add a connection structure for IPPROTO_ICMP sockets.
net/icmp: Implements sendto for the IPPROTO_ICMP socket.
net/icmp: Move icmp_sendto() and icmp_recvfrom() to separate files. They are likely to be complex (when they are implemented).
net/icmp: Hook IPPROTO_ICMP sockets into network. Fix some naming collisions. Still missing basic ICMP send/receive logic.
configs: apps/system/ping current need poll() enabled.
configs: All defconfig files that use to enable low-level support must now enabled CONFIG_SYSTEM_PING.
net/icmp: Adds basic build framework to support IPPROTO_ICMP sockets.
This commit backs out most of commit b4747286b1. That change was added because sem_wait() would sometimes cause cancellation points inappropriated. But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.
In the OS, all calls to sem_wait() changed to nxsem_wait(). nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.
In all OS functions (not libraries), change sem_wait() to nxsem_wait(). This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.
sched/semaphore: Add the function nxsem_wait(). This is a new internal OS interface. It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
psock_close() and net_close() are internal OS functions and should not set the errno variable.
psock_ioctl() and netdev_ioctl() are internal OS functions and should not set the errno variable.
net_dupsd() and net_dupsd2() are internal OS functions and should not set the errno variable.
net/ and fs/: net_vfcntl(), file_fcntl(), file_dup(), and file_dup2() are all internal OS interfaces and should not modify the errno value.
net/: psock_recvfrom() is an internal interface and should not set the errno nor should it be a cancellation point.
net/: psock_accept() is not a cancellation point.
net/: psock_getsockopt() and psock_socket*9 are an internal interfaces and should not set the errno.
net/: psock_getsockopt() is an internal interface and should not set the errno.
net/: psock_listen() is an internal interface and should not set the errno.
net/: psock_connect(( is an internal interface and should not set the errno nor should it be a cancellation point.
net/: psock_bind() is an internal interface and should not set the errno.
net/: psock_accept() is an internal interface and should not set the errno.
Squashed commit of the following:
net/route: Flush in cache when any entry is deleted from the routing table. When a router matching an IP address is found, add the routing table entry to the cache.
net/route: Add utility functions to manage an in-memory cache to improve performance when use a file-based routing table.
There are two issues with it however:
1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem.
2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file.
In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions.
The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y.
Squashed commit of the following:
net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it.
net/route: Fix some issues with locking routing table files.
net/route: Add partial implementation of delroute for the case where the routing table is in a file.
net/route: Add support for seeking to positions in the routing table.
net/route: Add net_addroute_ipv4/6() using a file-based routing table.
net/route: Add net_foreach_ipv4/4() using a file-based routing table.
net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
net/socket/recvfrom.c: Check fromlen integrity before using it.
net/socket/net_sockets.c: Always check for valid psock before using.
net/tcp/tcp_send_unbuffered.c: Avoid using psock beforing checking its integrity.
sched/timer/timer_create.c: Fix watchdog resource leak if cannot allocate a new timer.
From: Sakari Kapanen <sakari.kapanen@optofidelity.com>
Date: Sun, 24 Sep 2017 13:19:25 +0300
Subject: [PATCH] ICMPv6: fix router advertisement
Fixes several errors preventing icmpv6_radvertise.c from being compiled. Fixes conversions to network byte order (namely vlifetime, plifetime, mtu).
IPv6 source address is set to link-local IP address instead of the address in the netdev structure. This is in compliance to RFC 4861. RA didn't work on Linux before this change.
Finally, router prefix and prefix length are derived from the IPv6 address and netmask in the netdev structure. This seems to make more sense than using a predefined, separate prefix from the config.
Networking: Add implementation of logic for SIOCGIFCONF and SIOCGLIFCOF IOCTL commnds.
Networking: Add definitions and stuctures to support SIOCGIFCONF and SIOCGLIFCONF IOCTL commands.
commit 5b7b6e6e616c475c782e9883ada9f4a3b7cb4e2c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Aug 20 11:13:17 2017 -0600
IEEE 802.15.4 network device: Make same changes as per loopback device so that it will build with PF_IEEE802154 but without 6LoWPAN.
commit d656a98cf8eab2f20e884224b52cd47ec35df4cc
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Aug 20 10:31:28 2017 -0600
PF_IEEE802154: More fixes to device registration and to IEEE 802.15.4 loopback driver for PF_IEEE802154 without 6LoWPAN.
commit 866bb9cbb0c5af79734bbd434c07fa2560b6608f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Aug 20 09:58:13 2017 -0600
Network: Reorganize some Kconfig selections.
commit 230b4cb48008cba5fccdafa22340df1d43584829
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Aug 20 09:19:53 2017 -0600
Changes to conditional compilation so that PF_IEEE802154 can build without 6LoWPAN
commit d96cbd6520d40590a740f695c4cd72208ce872da
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Aug 20 09:17:02 2017 -0600
configs/sim/pf_ieee802154: Disable 6LoWPAN, IPv6, TCP, and UDP. Now things do not build
commit 2a3ab1652a2c95bcfc8be8380fc7cbdcb6472938
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Aug 19 08:44:31 2017 -0600
PF_IEEE802154: Finish some missing bind() logic. Add configs/sim configuration for testing.
commit 59be4b846a6e3bfe82087a888e3fdac9c3c414e5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 19:30:04 2017 -0600
PF_IEEE802154: More renaming to decouple 6LoPAN from radios in general.
commit 69fabb1aea76e54381bdc13de28a3f1441fb42f4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 19:21:11 2017 -0600
PF_IEEE802154: Missed a few renamings.
commit ff0af1bb25567720934cc1c2a721ccd92cc35f89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 17:46:58 2017 -0600
PF_IEEE802154: A few bugfixes
commit 01c7c84afd00cf907d280d30cfaf0fb2cf90e02e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 17:01:31 2017 -0600
PF_IEEE802154: A few bugfixes
commit dcef4056d1c1488c93151135f3b7106977faa903
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 16:31:05 2017 -0600
PF_IEEE802154: Bring in framework for sendto/recvfrom. Currently just a crude port of functions from net/pkt and do not provide the implemenation needed.
commit 68c5b7b6dd3ab7eb2d0c19890abb38e6561b140e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 15:18:31 2017 -0600
Trivial fix to typo in comment
commit fd0af534c089569ccdbd59f13b85453de0a653ad
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 15:07:20 2017 -0600
PF_IEEE802154: Add device lookup logic; Rename some things that used to be used only by 6LoWPAN but now must be shared with PF_IEEE802154 and need more generic naming.
commit 4fc80a1659f1c699b050775cefc7f6b631b46114
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 13:49:54 2017 -0600
PF_IEEE802154: Add driver poll logic.
commit d83f71992df8764faa93f9425f1a7602a758f730
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 13:28:59 2017 -0600
PF_IEEE802154: Add frame input function.
commit 77561b8c4d5d7be1f8d8eb62cf1a07229afe2048
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 12:46:29 2017 -0600
PF_IEEE802154: Socket type should be SOCK_DGRAM. Hook in socket interface.
commit c0f90350282e9905d7f26a1b30f04cc6d6794648
Merge: 8b518abfd0 169c55e546
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 09:36:32 2017 -0600
Merge remote-tracking branch 'origin/master' into pf_ieee802154
commit 8b518abfd07d492f5148f2c5fdf65604de9822da
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 09:35:39 2017 -0600
PF_IEEE802154: Add initialization and connection management logic.
commit 98b62620b3cb420041d8ad14204f9410a8aace8c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 07:52:51 2017 -0600
PF_IEEE802154: Add basic build support and socket interface framework.
commit f97da3a546f9d6e1b858cfc45538a06b62396034
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 19:09:46 2017 -0600
Network: Condition out some types that depend on definitions that are only available with 6LoWPAN is enabled.
commit 312e9dc1195527100e12bf6be8b629f5b29be1f6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 18:57:23 2017 -0600
6LoWPAN: Fix case where source and destination IP address were backward. Fix some compile issues when star topology support is enabled.
commit 3b0e71c5807194fbb006d0560bb2c98133055ba3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 16:01:48 2017 -0600
6LoWPAN PktRadio: Finishes up all logic; Lots of misc changes from build testing.
commit cc118f8cb335e1c48354fd7112e20be57de50b68
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 12:41:18 2017 -0600
6LoWPAN: Remove explicate type struct ieee802154_frame_meta_s from derive interface methods. Replace with a opaque void * type so that other radio meta data structures may use the interfaces. Add a new radion interface to get properties of the radio. Spirit: Finish packet I/O interface with the network.
commit 1aa0a63e8341ca5f9f88c294f96d1740459146d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 07:57:15 2017 -0600
6LoWPAN: Replace metadata input parameter type from struct ieee802154_data_ind_s to void*. This permits radios with different MAC metadata to interact with 6LoWPAN. Includes many changes to handle variable length radio addresses. No longer just short and exteneded; any length.
commit 46266ace61ae6246123873935436d864c7de31e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 17:50:42 2017 -0600
Spirit: Fix typos in SPI debug code.
commit 27c6b235f6a2d3b2f08da4920b224a40e9991f59
Merge: 7029dffd02 7f53e08917
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 13:43:02 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 7029dffd02156bcbfa84262671c2ca766a117191
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 12:02:13 2017 -0600
6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios.
commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 10:16:23 2017 -0600
6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN.
commit c6dbf9178539b7da75e492ffd1d1f93c9c326299
Merge: da782d6cdf 5889ce65f5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 07:30:08 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit da782d6cdff5980d71aaa2da5f9c28ab3438d085
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 07:26:48 2017 -0600
Spirit: Completes port of the spirit radio library to NuttX.
commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 17:42:51 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 692a27da396b7683749790923d8fa085091764f1
Merge: 27c0a6ec08 38f79543dc
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 15:49:37 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 27c0a6ec0813187f125922c81189a70cf04d83d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 15:47:27 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 96657af2831487724723a60084831619257fd953
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 14:20:14 2017 -0600
Spirit: Bring in more radio interface functions.
commit 640d55399b54a019be68825668fca1446abd082f
Merge: 3fcf84a9a2 47791442a0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:01:43 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:00:31 2017 -0600
Spirit: Brings in the last of the PktCommon interfaces.
commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:54:52 2017 -0600
Spirit: Add a few more PktCommon interfaces.
commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:33:31 2017 -0600
libc/termios: Remember block comments before empty file sections.
commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821
Author: Sebastien Lorquet <sebastien@lorquet.fr>
Date: Fri Jul 28 09:31:00 2017 -0600
tcdrain implementation based on a new term ioctl
commit 797d4adf7d41068c671f0217d369b797b269de1a
Author: Stefan Kolb <Stefan.Kolb@avat.de>
Date: Fri Jul 28 09:19:04 2017 -0600
We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load.
The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled).
The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully.
commit e298f48e96d9e34017dcab8e4d87032862ae9322
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:06:26 2017 -0600
Spirit: Bring in PktStack interfaces.
commit 4a0f00a7058312dcf6ac392689b9f69112f613ec
Merge: 855cf97130 b458934ac4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 18:05:02 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 855cf9713052a851a1daeb3842db2edd6ff6f658
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 18:03:56 2017 -0600
Spirit Network Driver: Add some hooks that will eventually support address filtering.
commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 17:13:21 2017 -0600
Spirit: Add a PktStack header file.
commit 705e8fff6a21264ab751fb34c107cb109430ac89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 15:00:03 2017 -0600
Spirit: Bring in last of timer interfaces.
commit f8984b2f82e165f5bba132d6b099222d1beb1fbd
Merge: cb79778a30 f287cc25d6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 11:57:01 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit cb79778a3044ae97a1cc615dfa24099144f04bd0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 11:46:31 2017 -0600
Spirit: Bring in last of QI interfaces.
commit 0245b330a33aa73531b82ae261b1312be9922e0f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 10:14:34 2017 -0600
Spirit: Add general interfaces.
commit 121845a8f229ec2c88e5721da5512135f6624ee5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 09:41:23 2017 -0600
Spirit: Bring in last of GPIO interfaces.
commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 17:09:19 2017 -0600
Spirit: Add some missing configuration options: Add register -level debug options.
commit 4be89324a5908e35afc70373c279f4d05f62b48f
Merge: 66e87f9bb3 598386ef90
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 15:36:20 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 15:19:56 2017 -0600
Spirit: Brings in last of PktBasic logic.
commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 11:55:50 2017 -0600
Spirit: Bring in AES and MBUS logic.
commit d00022d39ab0ce839de29386949481e5c24feff3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 09:22:03 2017 -0600
Spirit: Bring in remainder of calibration interfaces.
commit 40b4b2f902e04293f8940551a97a9a24a48988dd
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 08:44:32 2017 -0600
Spirit: Bring in DirectRF interfaces.
commit 7c109608e1a2989f3edbc2fd939a2d225fff382a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 07:46:19 2017 -0600
Spirit: Add CSMA support.
commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 18:57:43 2017 -0600
Spirit: Add some initial TX logic to network driver.
commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 17:02:11 2017 -0600
Spirit: Completes ports of spirit_management.* files
commit c904eef51d929e041b87d0c8aff6fa3c2f895341
Merge: 91e985a877 c9ff8cbab9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 15:15:04 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 91e985a87729017a66d19276c4d47681064f95ea
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 15:13:54 2017 -0600
Spirit: Add a few more functions that will soon be needed for packet transmission.
commit b5981d29983907c2194fbc26af4b72ad532bee78
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 13:30:07 2017 -0600
Spirit: Finish off some initialization issues; Started some interrupt handling logic.
commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 09:35:52 2017 -0600
Spirit: Completes very basic radio initialization for network driver
commit 1b544334361c54f46bcf0ba313c125932e8dafc6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 07:58:30 2017 -0600
Spirit: Add more radio initialization logic... getting closer.
commit 45d1047db60843c57d394ec910c63e7c127671e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 19:15:33 2017 -0600
Spirit: add some CSMA initialization logic
commit bcf55c71336d48947fe19bb09a799169852301c2
Merge: 89e9d426e9 2fc0fbcf7e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:47:11 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 89e9d426e91c056e659fccf5e5c4392618f8f777
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:44:19 2017 -0600
Update some comments
commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:15:54 2017 -0600
Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers
commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a
Merge: 87b616414a 6bd744c4b3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 15:38:40 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 87b616414a79c01a71acea78f8258e05325c1996
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 15:37:27 2017 -0600
Spirit radio driver is mutating into a standalone network driver.
commit 507798233868a661ae8adad3e3aa117075a7a146
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 13:32:08 2017 -0600
Spirit: More radio initialization logic
commit 33af25704ce9ca83d576300d153cfe31cc6d2576
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 12:19:14 2017 -0600
Spirit: Beginning of radio initialization logic
commit 97b20014c016e55952a8f9d8f4ae29e2cc555b23
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 09:42:06 2017 -0600
Spirit: More initialization logic.
commit 295d8e27824c0417fccea2344b30bb5c93ffbabe
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 23 15:39:53 2017 -0600
Spirit: Add header file containing enumeration of commands.
commit 8a2d9dd8eb9cc70cbcdd1b913fc9022b9c9ec8da
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 23 11:33:50 2017 -0600
Spirit: Add GPIO initialization logic
commit 8b6d80c44f92024c45a6ba63ba1af3fdafe94dc3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 23 10:07:25 2017 -0600
Spirit: Add interrupt control logic.
commit 423f846fe5c914f92a4bfea4d9d1fa33de1c77a5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 19:06:52 2017 -0600
Spirit: Yet a little more radio initialization logic.
commit 5895b979823e51ddde5ad52e6de66a8ad662e883
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 15:36:05 2017 -0600
Spirit: A little more radio initialization logic.
commit 86311ab30aad386203c181c792847dd1d37f9a02
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 13:02:32 2017 -0600
Spirit: A miniscule amount of radio initialization logic.
commit ad55e89d5ee12ea1eeea95fcd38ff3da0db4416a
Merge: 90a7666655 f4e46b0da7
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 10:56:30 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 90a766665534b05da0157dbc383cb06a98c86a79
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 10:52:52 2017 -0600
Spirit1: A few fixes for a clean build of initial configuration (not much there yet)
commit bbbf04c223230a52a7705a2161128265cfbaa480
Merge: 623d54a7f7 2319ea53a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 09:53:57 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 623d54a7f719e9032099f88f38203efee4b80722
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 09:43:52 2017 -0600
b-l475e-iot01a: Add a configuration for testing sprit radio.
commit d309d73d9f4665f9d870eb03531f450043d9389d
Merge: 52c3ddfae6 d88dc9b2e5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 09:02:06 2017 -0600
Merge remote-tracking branch 'origin/master' into spirit
commit 52c3ddfae6802e111c2b5cf1207baf21a61dd00b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 22 08:33:04 2017 -0600
Spirit: Add register definition header file.
commit 8d842ab5e8f9ca653b42f9ee88dc279f06b4fa98
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 17:27:03 2017 -0600
b-l475e-iot01a: Add initial, unverified support for the SPSRGF/Spirit1 module.
commit 73d902a1048616fb9c2dd2147cabcd8ee78e19ac
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 15:49:43 2017 -0600
Spirit: Fixes to get skeleton IEEE 802.15.4 driver build.
commit ebc5a8387bb94f0cc3827533795f3e4a33207e67
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 15:16:29 2017 -0600
Spirit1: Add framework for IEEE 802.15.4 driver. Does not yet build.
commit 52e195a7ae14ddb18bdd56258f4877381d2501ca
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 14:02:42 2017 -0600
Spirit: A little more SPI logic.
commit 90048d0c5b8a5af4d81a15d99535c84ed38d8ae9
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 11:19:06 2017 -0600
Spirit: Build directories setup. Some initial files added, mostly just to verify build.
commit 8273a381ac1f6bb081b292b5e73226185e9e634c
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 21 08:34:04 2017 -0600
USB composite: Remove references to CDC/ACM and USB MSC from composite logic. They are no longer coupled.
