David Alessio
6ae6ecc958
Merged in david_alessio/nuttx/refactor-pll-setup (pull request #581 )
...
Refactor pll setup
* fix typo in #def
* refactor PLL setup code...
* refactored PLL/CLK config, easier, checks for correctness
* call go_os_start if STACK_COLORIZED
* smarter config of EXTCLK output freq
* cosmetic
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-22 13:20:35 +00:00
David Alessio
1be5d96c6e
Merged in david_alessio/nuttx/add-FPU-to-ostest (pull request #562 )
...
Add FPU to xmc4 ostest
* remove +x from makefiles
* preserve .gdbinit across make clean
* add FPU support to ostest on xmc4
* add FPU test to ostest on xmc4
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-02 13:35:26 +00:00
Gregory Nutt
b2adb4917f
arch/arm/src/lpc54xx: Add register level debug output for Ethernet testing. Fixed a few start up problems. Still hangs on start-up, however.
2017-12-31 11:11:57 -06:00
Gregory Nutt
77728f49f1
arch/arm/src/lpc54xx: Add EMC register definitions. Add basic build support for EMC and SDRAM.
2017-12-10 12:40:01 -06:00
Gregory Nutt
66ee22f363
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 08:54:24 -06:00
Alan Carvalho de Assis
674b331f03
arm/src/xmc4: Include Alt. Interrupt Enable to RX_EVENTS and rename serial GPIO configurations.
2017-11-25 18:13:23 -06:00
Gregory Nutt
776b65bc90
Revert "arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC."
...
This reverts commit 88982df09c
2017-11-25 09:45:12 -06:00
Gregory Nutt
88982df09c
arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC.
2017-11-25 08:19:43 -06:00
Gregory Nutt
b2764a9e4b
graphicx/nxmu: nx_server() should be static.
2017-11-25 06:54:13 -06:00
Alan Carvalho de Assis
639f77341a
arch/arm/src/xmc4: Remove hard-coded values in clock configuration. USB will be fixed later.
2017-11-25 06:39:44 -06:00
Alan Carvalho de Assis
0ac8ac240a
arch/arm/src/xmc4: Do not run at 144MHz unless BOARD_FCPU_144MHZ is selected in the board.h header file.
2017-11-24 12:47:47 -06:00
Alan Carvalho de Assis
3931621bde
configs/xmc4500-relax: Setup max. freq. 120MHz and setup pull-up to UART RXD pin
2017-11-24 12:31:02 -06:00
Alan Carvalho de Assis
4f0c4b798f
configs/xmc4500-relax: Add config for UART3 on RXD P0.0 and TXD P0.1 pins.
2017-11-16 13:53:01 -06:00
Alan Carvalho de Assis
fcb5129567
arch/arm/src/xmc4: Kconfig was not selecting XMC4_USIC for USIC1.
2017-11-16 13:51:17 -06:00
Gregory Nutt
873de7b480
configs/*/README.txt: Update to the new URL for obtaining the ARM toolchain.
2017-08-13 07:18:19 -06:00
Gregory Nutt
382def3df5
Move remaining, unique Make.defs files into scripts directory.
2017-07-11 12:13:36 -06:00
Gregory Nutt
e40ccc1b60
Move remaining, unique Make.defs files into scripts directory.
2017-07-11 11:14:11 -06:00
Gregory Nutt
5a9eebe270
More conversions of defconfig files to compressed format. All but Windows native configurati9ons.
2017-07-09 20:05:59 -06:00
Gregory Nutt
44545781e5
configs/: Remove dangline space at the end of lines in .txt files.
2017-06-28 13:18:41 -06:00
Gregory Nutt
cd54a0340f
Fix a typo. And typo in Kconfig file is reflect in all defconfig files.
2017-06-15 14:29:09 -06:00
Gregory Nutt
b0fda33e13
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
2017-05-13 13:28:15 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
1620ff05f4
Remove all setenv.sh files.
2017-04-26 07:49:37 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
c071e2a30c
Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads.
2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305
Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES
2017-03-27 09:08:14 -06:00
David S. Alessio
7f2c4c4274
XMC4xxx: Add FPU support
2017-03-22 12:04:32 -06:00
Gregory Nutt
c4579e775a
Fix some typos; Make sure some private functions have static storage class
2017-03-22 11:04:44 -06:00
Gregory Nutt
4af55cee6e
README.txt edited online with Bitbucket
2017-03-22 00:55:44 +00:00
Gregory Nutt
9919e33705
Trivial changes to comments.
2017-03-21 15:31:53 -06:00
Gregory Nutt
343f7ceab2
XMC4xxx: Misc clock clean-up; PBDIV should be controllable from board.h
2017-03-21 15:05:17 -06:00
Gregory Nutt
248c821730
Update a README file.
2017-03-21 12:30:48 -06:00
Gregory Nutt
21a626878a
XMC4xxx: Clean up problems associated with USIC initialization. USIC still does not work in UART mode.
2017-03-21 10:55:52 -06:00
Gregory Nutt
1e9bc166d4
XMC4500 Relax: Add README.txt file. Fix some comments.
2017-03-21 10:02:23 -06:00
Gregory Nutt
4ba091933e
XMC4xxx: Fix for early bringup problems
2017-03-20 16:31:35 -06:00
Gregory Nutt
e1f86f407f
XMC4500-Relax: Add LED support.
2017-03-20 14:33:48 -06:00
Gregory Nutt
3a91ba5264
XMC4xxx: Plug last holes to get a first, clean build.
2017-03-20 13:46:02 -06:00
Gregory Nutt
985c137b78
XMC4xxx: Finishes system timer logic.
2017-03-20 13:20:31 -06:00
Gregory Nutt
8a3422f837
XMC4xxx: Complete lowputc logic
2017-03-20 11:25:51 -06:00
Gregory Nutt
59b9ef8fdc
XMC4xxx: Revise configuration for USICs. Three USICs but 4 UARTs possible with each channel of USIC.
2017-03-19 11:10:31 -06:00
Gregory Nutt
5693f26a5e
XMC4xx: Fix several early compilation problems.
2017-03-16 11:30:02 -06:00
Gregory Nutt
fe610e7a1d
XMC4500 Relax: Add basic board support infrastructure of Infineon XMC4500 Relax Lite v1
2017-03-16 10:52:01 -06:00
Gregory Nutt
66d001d0e1
XMC4xxx: Initial clock configuration logic.
2017-03-16 09:48:57 -06:00
Gregory Nutt
77f244ed7b
XMC4xx: Add logic to get the CPU frequency.
2017-03-15 10:22:24 -06:00
