A usbdev has only one serial string, so use a unique macro to control it.
For boards that enable board serial string using COMPOSITE_BOARD_SERIALSTR,
PL2303_BOARD_SERIALSTR, CDCACM_BOARD_SERIALSTR, USBADB_BOARD_SERIALSTR,
USBMSC_BOARD_SERIALSTR, and RNDIS_BOARD_SERIALSTR, they need to be replaced
with BOARD_USBDEV_SERIALSTR.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Pinephone Pro port just nsh
Status:
booting till GICD / IRQ issue
style cleanups
start to fix style checks
revert offset
whitespaces
revert a64 bringup file
prob last cleanup
more cleanups
remove dts
move changes from a64 hardware specific folders to rk3399
undo common changes (except head.s)
revert gitignore
missing irq.h and rk3399_serial.c need to finish cleaning them up
WIP
add source for load address
make debug print hex again add board include
Pinephone Pro port just nsh
Status:
booting till GICD / IRQ issue
style cleanups
start to fix style checks
revert offset
whitespaces
revert a64 bringup file
prob last cleanup
more cleanups
remove dts
move changes from a64 hardware specific folders to rk3399
undo common changes (except head.s)
revert gitignore
missing irq.h and rk3399_serial.c need to finish cleaning them up
WIP
add source for load address
remove ccache, add board memory map
remove board reset
This PR adds support for PINE64 Star64 64-bit RISC-V SBC, based on StarFive JH7110 SoC. Most of the code is derived from NuttX for QEMU RISC-V (Kernel Mode). [The source files are explained in the articles here](https://github.com/lupyuen/nuttx-star64)
Modified Files:
boards/Kconfig: Added Star64 board
New Files in boards/risc-v/jh7110/star64:
src/jh7110_appinit.c: Startup Code
include/board.h: Star64 Definitions
include/board_memorymap.h: Memory Map
src/etc/init.d/rc.sysinit, rcS: Startup Script
src/.gitignore: Ignore the tmp filesystem
scripts/ld.script: Linker Script
scripts/Make.defs: Star64 Makefile
src/Makefile: Star64 Makefile
Kconfig: Star64 Config
configs/nsh/defconfig: NSH Build Config
Updated Documentation:
introduction/detailed_support.rst: Added StarFive JH7110 SoC and Star64 SBC
platforms/risc-v/jh7110/index.rst: New page for StarFive JH7110 SoC
platforms/risc-v/jh7110/boards/star64/index.rst: Building and booting NuttX for Star64
This commit adds support to Ai-Thinker ESP32 Audio Kit V2.2 A247
board.
There are two modules of this board. The old model uses AC101 audio
and is not supported currently (AFAIK there is no AC101 driver) and
the new version uses the ES8388 audio codec. This model is supported
by this commit.
Just read the documentation to test playing an audio file.
TODO: Test audio recording.
Initially supporting ESP32-C3 chip, to be followed by other RISC-V-based
chips from Espressif.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Summary:
Adding virtual evaluate platform FVP. This FVP board configuration
will be used to emulate generic ARM64v8-R (Cotex-R82)series hardware
platform and provide support for these devices:
- GICv3 interrupt controllers for ARMv8-r
- PL011 UART controller(FVP)
Note:
1. ostest is PASSED at fvp ( single core and SMP)
2. the FVP tools can be download from ARM site, please check FVP
board readme.txt
TODO: merge PL011 UART driver to common place
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
First decoupling changes related to CMAKE
BINDIR/APPSBINDIR:
Output path of Kconfig which dynamically generated by NuttX Kernel/Apps
This option is consistent with the TOPDIR/APPSDIR by default, and will
be changed when out-of-tree compilation is supported
Signed-off-by: chao an <anchao@xiaomi.com>
- Adds support for the Starcat Jupiter Nano
SAMA5D27C-LD1G board
- https://github.com/starcat-io/jupiter-nano
- this board is very similar to the Microchip/Atmel
SAMA5D2-Xplained board (sama5d2-xult)
This PR adds the drivers for Allwinner A64 PIO (Programmable I/O) and PinePhone LEDs (Red / Green / Blue).
The PIO Driver is based on the NuttX PIO Driver for Allwinner A10: [`arch/arm/src/a1x/a1x_pio.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_pio.c)
- `arch/arm64/src/a64/Make.defs`: Add PIO Driver to Makefile
- `boards/Kconfig`: Add `ARCH_HAVE_LEDS` to PinePhone
- `boards/arm64/a64/pinephone/src/pinephone.h`: Define PinePhone LEDs
- `boards/arm64/a64/pinephone/src/pinephone_boardinit.c`: Start Auto LEDs
- `boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Start User LEDs
- `boards/arm64/a64/pinephone/src/Makefile`: Add LED Driver to Makefile
- `boards/arm64/a64/pinephone/configs/nsh/defconfig`: Add `CONFIG_USERLED` to `nsh` config
- `arch/arm64/src/a64/a64_pio.c`, `a64_pio.h`: Allwinner A64 PIO Driver
- `arch/arm64/src/a64/hardware/a64_memorymap.h`: PIO Memory Map
- `arch/arm64/src/a64/hardware/a64_pio.h`: PIO Definitions
- `boards/arm64/a64/pinephone/include/board.h`: Define PinePhone LEDs
- `boards/arm64/a64/pinephone/src/pinephone_autoleds.c`: Driver for Auto LEDs
- `boards/arm64/a64/pinephone/src/pinephone_userleds.c`: Driver for User LEDs
- `introduction/supported_platforms.rst`: Add Allwinner A64 as Supported Platform
- `platforms/arm/a64/boards/pinephone/index.rst`: Add PIO and LEDs to PinePhone
ESP32-SPARROW-KIT is built upon ESP32-WROVER-KIT by adding various
peripherals. This is an initial commits that only backports the code
as it is, without further changes.
Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
This change adds the following:
- Rename the board configuration name from qemu-a53 to qemu-v8a.
- Add the configurations for Cortex-A57 and Cortex-A72.
Signed-off-by: Hidenori Matsubayashi <hidenori.matsubayashi@gmail.com>
Use CONFIG_ARCH_CHIP_QEMU instead of CONFIG_ARCH_CHIP_QEMU_A53. This is because these configurations depend on the hardware configuration of qemu (memory map, irq numbers, etc.).
Signed-off-by: Hidenori Matsubayashi <hidenori.matsubayashi@gmail.com>
Modify the file according to the checks
update the board config files, and modify the gd32f4xx_progmem.c
Add chip GD32F450 of GD32MCU
delete the micro FAR, modify code style
Add chip GD32F450 of GD32MCU
* boards/arm/tiva/tm4c129e-launchpad: New subdirectory providing
board support for the Texas Instruments TM4C Crypto Connected
LaunchPad, or more correctly the EK-TM4C129EXL.
* Documentation/introduction/detailed_support.rst,
Documentation/introduction/supported_platforms.rst,
boards/README.txt: Document the additional board support.
* boards/Kconfig:
(ARCH_BOARD_TM4C129E_LAUNCHPAD): New config.
(ARCH_BOARD): Add tm4c129e-launchpad.
(Board-Specific Options): Source the board-specific Kconfig
boards/arm/tiva/tm4c129e-launchpad/Kconfig when selected.
N/A
Summary:
Arm64 support for NuttX, Features supported:
1. Cortex-a53 single core and SMP support: it's can run into nsh shell at
qemu virt machine.
2. qemu-a53 board configuration support: it's only for evaluate propose
3. FPU support for armv8-a: FPU context switching at NEON/floating-point
TRAP is supported.
4. psci interface, armv8 cache operation(data cache) and smccc support.
5. fix mass code style issue, thank for @xiaoxiang781216, @hartmannathan @pkarashchenko
Please refer to boards/arm64/qemu/qemu-a53/README.txt for detail
Note:
1. GCC MACOS issue
The GCC 11.2 toolchain for MACOS may get crash while compiling
float operation function, the following link describe the issue
and give analyse at the issue:
https://bugs.linaro.org/show_bug.cgi?id=5825
it's seem GCC give a wrong instruction at certain machine which
without architecture features
the new toolchain is not available still, so just disable the MACOS
cibuild check at present
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
This patch includes bare minimum support for nucleo-wl55jc board.
It compiles and nsh shell is working properly on virtual com port
over USB. 3 onboard leds with userled driver are working.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
arch/x86/Kconfig:28:warning: choice value used outside its choice group
arch/x86/Kconfig:29:warning: defaults for choice values not supported
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Support for the STMicroelectronics B-U585I-IOT02A development board. This
is a proof-of-concept port that demonstrates running NuttX as the
Non-Secure TrustZone domain companion to TrustedFirmware-M.
Signed-off-by: Michael Jung <mijung@gmx.net>
iSerialNumber field in the device descriptor can be used to determining the
board when multiple boards connected to the same host. So add feature to change
serial string by board unique ID dynamically.
To use this feature, user must be implement the board_usbdev_serialstr() logic.
refs #13909
includes following parts:
add support of sparc in arch/Kconfig
add support of sparc in boards/Kconfig
add sparc dir in arch, add sparc dir in boards
add support of sparc in libs/libc/machine
modify all the coding style problem about saprc
It’s an RP2040 based device with some interesting features:
+ small form factor (18x21.3mm)
+ 8 MByte Flash
+ RGB LED
+ Reset Button
+ USB-C
- reduced pin-header
Support in derived from: boards/arm/rp2040/raspberrypi-pico
Location: boards/arm/rp2040/pimoroni-tiny2040
