sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
41,006 Commits 1 Branch 0 Tags 291 MiB
778f050102
Commit Graph

303 Commits

Author SHA1 Message Date
Xiang Xiao
0074afa0ac net/netdev: add devif_loopback_out() to check the loopback case where a packet is being sent to itself. Modify the net driver to call this function in this case. This function will simply re-inject the packet back into the network and the network driver will not put anything on the wire. 2018-08-24 09:21:33 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Gregory Nutt
10069067c1 include/nuttx/i2c/i2c_master.h: Rename I2C_M_NORESTART to I2C_M_NOSTART since it may be used in other contexts than a repeated start. Add comments to clarilfy setup for repeated start. 2018-08-03 08:51:55 -06:00
Gregory Nutt
22cd0d47fa This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE. 
This makes the user interface a little hostile.  People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header).  A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length.  Instead, we define the packet buffer size then derive the MTU.

The MTU is not common currency in networking.  On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP).  Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes.  So we should be all good and without the recurring 14 byte error in MTU's and MSS's.

Squashed commit of the following:

    Trivial update to fix some spacing issues.
    net/: Rename several macros containing _MTU to _PKTSIZE.
    net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE.  This is not the MTU which does not include the size of the link layer header.  This is the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename the file d_mtu in the network driver structure to d_pktsize.  That value saved there is not the MTU.  The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header.  The MTU does not include the link layer header.
 2018-07-04 14:10:40 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte: 
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
 2018-06-06 09:54:30 -06:00
Gregory Nutt
9222f50e1c arch/: Make sure the up_irq_enable() is available on all architectures. I will not be able to test all of these new versions of this function so this may break things for awhile. 2018-06-06 09:25:40 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
a8b6be4aaf The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method. 2018-01-22 08:17:45 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following: 
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
 2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following: 
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
 2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following: 
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
 2017-10-03 12:52:31 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0 Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX. 2017-02-24 15:58:17 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
3a0413c048 Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10. 2017-01-01 16:29:03 -06:00
Gregory Nutt
34be3e7c3c Add configuration support for builds with Ubuntu under Windows 10 2017-01-01 15:34:23 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
43459fe75e DM09x0 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 11:42:15 -06:00
Gregory Nutt
41e35c88bf eZ80 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 10:43:35 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Gregory Nutt
56f2454c86 Fix names of pre-processor variables used in header file idempotence 2016-08-06 18:48:45 -06:00
Gregory Nutt
d41008e220 Update some header commments 2016-08-06 18:16:31 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
b39e53391d Add underscore at beginning of alert() as well 2016-06-16 12:38:05 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
a98bc05f65 New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting. 2016-06-14 09:07:53 -06:00
Gregory Nutt
3c2050040c arch/z80/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-13 18:55:24 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
5ef3e3e215 Replace confusing references to uIP with just 'the network' 2016-05-30 11:52:07 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
4d4f54a789 Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs 2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98 Standard some naming if code sectino comments 2016-02-21 18:06:09 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 19:11:09 -06:00
Gregory Nutt
24428f7a59 z80 family: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 17:32:25 -06:00
Gregory Nutt
1166e311b0 Networking: Remove the HSEC argument from devif_timer. 2016-02-03 11:17:15 -06:00
Gregory Nutt
1e4f2ae2c1 Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming 2016-02-02 12:08:23 -06:00
Gregory Nutt
d2571985ef I2C: up_i2creset should not be a global function; Now it is an I2C interface method 2016-02-02 11:21:45 -06:00
Gregory Nutt
0693e76be8 I2C: Remove the setfrequency method from the interface 2016-02-01 16:30:29 -06:00
Gregory Nutt
bec6f373a7 I2C: Cosmetic changes 2016-02-01 14:15:52 -06:00
Gregory Nutt
a64f36a63e I2C: Remove setaddress method 2016-02-01 12:14:20 -06:00
Gregory Nutt
ce988c7ed3 Remove the read and write methods from the I2C interface 2016-02-01 09:22:10 -06:00
Gregory Nutt
2171438c61 I2C_TRANSFER support is no longer optional 2016-01-31 14:00:53 -06:00
Gregory Nutt
74d2073fca ez80: Fix some compile errors when I2C_TRANSFER is enabled 2016-01-31 13:08:43 -06:00
Gregory Nutt
e4629af2bc ez80: Add I2C_TRANSFER method to the I2C driver; Fixes for working with ZDS-II toolchain (still some problems with internal errors; Various fixes due to bit rot 2016-01-31 12:43:14 -06:00
Gregory Nutt
531d73af41 Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:35:46 -06:00
Gregory Nutt
9f9b85a932 Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 07:59:44 -06:00
Gregory Nutt
f002980b50 For eZ80 MCUs, rename up_spiinitialize to ez80_spibus_initialize 2016-01-27 08:39:02 -06:00
Gregory Nutt
52109ade2d Flesh out unfinished lock() method implementations in al SPI drivers 2016-01-24 09:15:57 -06:00
Gregory Nutt
b7cbbab761 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:10:21 -06:00
Gregory Nutt
4bd6adb725 Add dummy hwfeatures method to all SPI interfaces 2016-01-23 15:09:38 -06:00
Gregory Nutt
10001f8556 WINTOOl should be selected only for Cygwin. MSYS and native should not have it. 2016-01-09 16:34:33 -06:00
Gregory Nutt
e5e631e57f include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:07:18 -06:00
Gregory Nutt
79df561669 Rename board_led_off to board_autoled_off 2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3 Rename board_led_on to board_autoled_on 2015-11-01 09:07:06 -06:00
Gregory Nutt
6fc6d17760 Fix some spacing problems 2015-10-04 14:59:08 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
26347891ac Apply same fix for ARMv7-M to other architectures 2015-09-30 11:21:04 -06:00
Gregory Nutt
975d912b40 Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
29136e51cc Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
7bd3d5eaf1 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
d77a19f0a2 Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
2c1f018e85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
2bc16b2ba5 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
407e72b300 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
e4c4ab5ef2 onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-03 11:40:29 -06:00
Gregory Nutt
b3792fcd86 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
a26b03d0d0 rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
d01808c603 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
a954eb76b2 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
3aa94411be Remove up_assert_code 2013-04-25 15:19:59 -06:00
patacongo
e47c64204c More changes for a kernel-mode allocator (more to be done) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-09 21:12:20 +00:00
patacongo
f84c45c220 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 22:24:49 +00:00
patacongo
bc69dc2c5a Rename _TCB to struct tcb_s 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5610 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-04 18:46:28 +00:00
patacongo
b1aa82fcca Add syslog.h; rename lib_rawprintf() to syslog() 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-28 21:55:16 +00:00
patacongo
1a4baed866 Mostly costmetic updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5452 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-23 17:32:41 +00:00
patacongo
1fdf3f62a5 More z180 serial logic 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5437 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-14 19:15:07 +00:00
patacongo
eb8348dfe4 configs/xtrs/ostest converted to kconfig-frontend and Windows native 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5421 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-08 23:21:34 +00:00
patacongo
cc9dacaa62 Add dummy Toolchain.defs files for z80 arch family 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5408 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-03 14:13:23 +00:00
patacongo
372c910446 z8 configurations all converted to use mconf tool 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5397 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-28 17:50:28 +00:00
patacongo
7efa9df77e Verify that z8 targets still build (under Cygwin) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5396 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-28 15:53:42 +00:00
patacongo
5b81a279ca ez80f910200zco/ostest now uses Kconfig 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5390 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-26 17:07:34 +00:00
patacongo
9c987b8368 A few more Windows native build fixes for eZ80 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5383 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-22 21:21:48 +00:00
patacongo
7fe5f4d62e Convert configs/ez80f910200kitg/RCS/ostest to use the newer mconf-based configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5375 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-20 21:19:36 +00:00
patacongo
27aa26c2db Change how UARTs are enabled for i.MX, M16C, and ez80 to make them compatible with other chips 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5374 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-20 19:59:40 +00:00
patacongo
3a262416d6 Remove executable property from source and make files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5146 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:46:10 +00:00
patacongo
36df84c843 Email address change in nuttx/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:32:24 +00:00
patacongo
1749f57574 LPC17xx serial now supports minimal termios ioctls; serial driver ioctl methods should not set errno variable 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4994 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-31 23:45:21 +00:00
patacongo
2952147ccb More Kconfig files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4632 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-18 19:17:30 +00:00
patacongo
b4852fca75 Move serial header files to include/nuttx/serial 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4500 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-21 19:47:23 +00:00
patacongo
df43e1b890 Move all non-standard, NuttX header files into include/nuttx/net 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4450 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-03 23:18:34 +00:00
patacongo
667290b144 Add logic so that a RAM log can be used in place of a console device 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4380 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-11 03:50:52 +00:00
patacongo
5cef4f2610 Add one more font; Fix ez80 serial bug 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3825 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-29 13:21:30 +00:00
patacongo
8811e94938 Add apps/examples/nxhello -- a VERY simple graphics example 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3797 42af7a65-404d-4744-a932-0658087f49c3
 2011-07-18 22:22:02 +00:00
patacongo
ddc35de7c8 Bug 3334625: Fix typo in conditional compilation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3736 42af7a65-404d-4744-a932-0658087f49c3
 2011-06-30 23:13:52 +00:00
patacongo
160ae499c1 Rename i2c directories to sensors 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3525 42af7a65-404d-4744-a932-0658087f49c3
 2011-04-19 18:51:02 +00:00
patacongo
7bb3b4c8a1 current_regs should be volatile; add support for nested interrupts; enable interrupts during syscall processing 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3475 42af7a65-404d-4744-a932-0658087f49c3
 2011-04-06 23:01:06 +00:00
patacongo
c6eb9d6c3f New LIS331DL driver and VSN updates from Uros 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3457 42af7a65-404d-4744-a932-0658087f49c3
 2011-04-03 14:26:05 +00:00
patacongo
45434cd49d Add cmddata method to the SPI interface 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3157 42af7a65-404d-4744-a932-0658087f49c3
 2010-12-03 01:37:56 +00:00
patacongo
c4482055d2 uip_arp_ipin needs a struct uip_driver_s as an input 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3132 42af7a65-404d-4744-a932-0658087f49c3
 2010-11-25 20:55:46 +00:00
patacongo
13ac4eb82d Fix a signal trampoline bug 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3053 42af7a65-404d-4744-a932-0658087f49c3
 2010-10-27 01:46:08 +00:00
patacongo
fe3178c79c Outgoing IGMP is functional 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2797 42af7a65-404d-4744-a932-0658087f49c3
 2010-07-14 01:57:00 +00:00
patacongo
3151dcf725 Add support for multicast MAC addresses 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2784 42af7a65-404d-4744-a932-0658087f49c3
 2010-07-11 15:17:11 +00:00
patacongo
fae29bca60 In progress changes for OLED display work 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2669 42af7a65-404d-4744-a932-0658087f49c3
 2010-05-15 01:15:52 +00:00
patacongo
563c0601ab Changing NuttX fixed size type names to C99 standard names -- things will be broken for awhile 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2361 42af7a65-404d-4744-a932-0658087f49c3
 2009-12-16 20:59:06 +00:00
patacongo
8561ce102a Changing NuttX fixed size type names to C99 standard names -- things will be broken for awhile 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2354 42af7a65-404d-4744-a932-0658087f49c3
 2009-12-16 14:15:34 +00:00
patacongo
5f08d86694 Extend SPI interface to better handle multiple devices on same SPI bus 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2162 42af7a65-404d-4744-a932-0658087f49c3
 2009-10-20 14:05:56 +00:00
patacongo
33a6b7807e Consolidate buffer dumping; fix all occurrences of 'the the' 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1951 42af7a65-404d-4744-a932-0658087f49c3
 2009-06-25 17:44:35 +00:00