sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,291 Commits 1 Branch 0 Tags 291 MiB
79e098b20e
Commit Graph

3842 Commits

Author SHA1 Message Date
Gregory Nutt
4446d6e98d ARMv7 L2 Cache: Minor bugfixes/improvements 2014-07-26 18:48:26 -06:00
Gregory Nutt
0519118de2 Enables cache early in boot-up sequence 2014-07-26 18:48:00 -06:00
Gregory Nutt
d09ee81320 Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled 2014-07-26 18:47:33 -06:00
Gregory Nutt
0d83d198de New cache.h file. Renames cp15_XYZ_cache() to arch_XYZ_cache() and addes L2 cache support if L2 cache is enabled 2014-07-26 18:46:52 -06:00
Gregory Nutt
ca3776a7ec Rename ARMv7-A cache.h to cp15_cache.h. Things will be broken on this commit until I get the new cache.h in place. 2014-07-26 16:54:19 -06:00
Gregory Nutt
ec70cfe44c arch/arm/src/armv7-a/arm_l2cc_pl310.c, l2cc.h, l2cc_pl310.h, Kconfig: Add initiali support for the ARM L2CC-PL310 L2 cache. 2014-07-26 16:50:08 -06:00
Gregory Nutt
be198337f7 ARMv7-A: L2CC PL310 address filtering is an optional feature 2014-07-25 19:46:09 -06:00
Gregory Nutt
ef5bfd72a6 ARMv7-A: Add missing L2CC PL310 bit definitions 2014-07-25 19:41:35 -06:00
Gregory Nutt
597c9839cc rch/arm/armv7-a/l2cc_pl310.h: Move arch/arm/sama5/chip/sam_l2cc.h to arch/arm/armv7-a/l2cc_pl310.h. Adjust the two corresponding Kconfig files as well. 2014-07-25 17:25:17 -06:00
Gregory Nutt
47752a35c1 3rd time is a charm. Max is right, the initial priority setting should be NVIC_SYSH_PRIORITY_MIN 2014-07-24 16:51:07 -06:00
Gregory Nutt
8718dad9c8 Oops, should have been NVIC_SYSH_PRIORITY_DEFAULT 2014-07-24 16:42:15 -06:00
Gregory Nutt
7f5b88dbcd LPC17 Ethernet: Added option to use the kernel worker thread to do most of the workload with CONFIG_NET_WORKER_THREAD option in Kconfig. Eliminated a problem with PHY DP83848C : it doesn't need a specific initialization on mbed. Critical bufix: From time to time (after some hours) the Ethernet receiver would lose one receive interrupt and the IP stack never recover because there is no receive watchdog as the transmit watchdog. From Max 2014-07-24 16:39:18 -06:00
Gregory Nutt
fdff663e57 Added burstmode ADC conversion mode, with CONFIG_ADC_BURSTMODE option in Kconfig. From Max 2014-07-24 16:23:31 -06:00
Gregory Nutt
ab572091c5 Mostly cosmetic changes from Max 2014-07-24 16:00:21 -06:00
Gregory Nutt
ad3626e61a Eliminate warnings. From Max 2014-07-24 15:50:37 -06:00
Gregory Nutt
6dcb524d16 Correct the initial value of the BASEPRI register. This was apparently never being initialized. From Max 2014-07-24 15:37:13 -06:00
Gregory Nutt
0fcc0adaa2 Fix a recently introduced typo that was being masked by some bad conditional compilation 2014-07-22 11:45:14 -06:00
Gregory Nutt
17abe05357 Update ChangeLog 2014-07-22 07:25:01 -06:00
Gregory Nutt
3bb6a877fd STM32 OTGFS device: Various changes to try to reduce that amount of time in interrupts handles and with interrupts disbled. Needs verification on other platforms. From Petteri Aimonen 2014-07-22 07:23:17 -06:00
Gregory Nutt
f76cac2773 Fix typos in the STM32 DAC header file. From Petteri Aimonen 2014-07-22 07:13:33 -06:00
Gregory Nutt
121c00036d SAMA5D4 XDMAC: Never sets a channel as secure. Will probably have to revisit this 2014-07-21 17:46:35 -06:00
Gregory Nutt
df65c5e4df SAMA5D4: Fix some HSMCI issues when XDMAC0 is enabled 2014-07-21 17:45:48 -06:00
Gregory Nutt
b9f1fbeb6c SAMA5 HSMCI: Correct multi-block DMA setup; Fixes related to DMA timeout. Still problems with HSMCI DMA via XDMAC 2014-07-21 16:49:56 -06:00
Gregory Nutt
f508c07b97 SAMA5 XDMAC: Missing some CUBC bits 2014-07-21 16:47:16 -06:00
Gregory Nutt
43b214addd SAMA4D5 HSMCI: Set burst size to 1, sample DMA registers on timeout, and don't return from transfer until BOTH the HSMCI transfer and DMA complete 2014-07-21 13:24:55 -06:00
Gregory Nutt
3b24da2d7c XDMAC register sampling missed CIM register; Should not set SWREQ bit in DMA setup 2014-07-21 13:23:36 -06:00
Gregory Nutt
e202c8e9b2 Fix a commented out assertion 2014-07-20 17:06:55 -06:00
Gregory Nutt
e8c030a833 Fix typos in comments 2014-07-20 13:09:47 -06:00
Gregory Nutt
7fa1eec246 SAMA5D4-EK: PIO Schmitt trigger logic backward 2014-07-20 13:04:30 -06:00
Gregory Nutt
f4bcb730d2 WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled 2014-07-20 09:17:36 -06:00
Gregory Nutt
54d441b5c9 SAMA5D ADC: Fix some typos in conditional compilation 2014-07-19 13:56:48 -06:00
Gregory Nutt
6ece3d8378 SAMA5 SCK: The SAMA5D3 does things a little differently 2014-07-19 13:55:53 -06:00
Gregory Nutt
d8f85d1caa SAMA5 PCK: Add support for the slow clock as the PCK clock source 2014-07-19 13:55:08 -06:00
Gregory Nutt
c74531e014 SAMA5: Update slow clock logic. Things work a little differently on the SAMA5D3 2014-07-19 13:25:59 -06:00
Gregory Nutt
bad3ad58cb SAMA5: Add slow clock support 2014-07-19 13:07:55 -06:00
Gregory Nutt
6d9f9e37bf SAMA5D4-EK: Add WM8904 initialization logic 2014-07-19 11:58:53 -06:00
Gregory Nutt
3a6ea3642f SAMA5 LCDC: Back out the delay kludge. Increase the LCDC input clock from MCK to 2*MCK was sufficient for all timing instbility problems 2014-07-12 11:24:14 -06:00
Gregory Nutt
8d1feb7a54 SAMA5D4-EK LCDC: Change source clock to 2*Mck seems to solve stability issues 2014-07-12 09:45:05 -06:00
Gregory Nutt
253110bbf1 SAMA5D4-EK LCDC: Adding a delay after enabling the LCD solves lots of start-up timing issues 2014-07-12 08:05:22 -06:00
Gregory Nutt
3384906cdd Lpc17xx Ethernet: Comment out an assertion that is reported to first inappropriately. From Max 2014-07-11 12:25:11 -06:00
Gregory Nutt
95df6bd3de SAMA5D4-EK LCD: Actual hardware with appears to be RGB888 2014-07-10 12:23:41 -06:00
Gregory Nutt
89024f3698 SAMA5D4-EK: LCDC works (with a few color problems) 2014-07-10 12:03:10 -06:00
Gregory Nutt
60e64ae93d Don't have to set SDA high initially in I2C reset because that is done by the pin configuration 2014-07-09 17:17:32 -06:00
Gregory Nutt
981c1ebf55 SAMA5 PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a a vanilla input first so that final pin configuration is more read-able (i.e., easier to debug) 2014-07-09 17:16:43 -06:00
Gregory Nutt
27be48a1ba SAMA5 I2C Reset: More changes... still does not work right 2014-07-09 15:09:06 -06:00
Gregory Nutt
c2ca4be4f5 SAMA5 TWI: Some restructured needed by up_i2creset. Also timeout needs to vary with the size of the transfer and if debug is on or not 2014-07-09 13:39:10 -06:00
Gregory Nutt
84056291e8 Use sam_pio_forceclk() so that we can read the current state of an open-drain output in the TWI reset logic. 2014-07-09 11:31:21 -06:00
Gregory Nutt
a966e4f30b Add a new interface sam_pio_forceclk() that can be used to force PIO clocking on. I am afraid I was too conservative with PIO clocking in the initial design; this is the price 2014-07-09 11:26:07 -06:00
Gregory Nutt
e9362128bd SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
a7ec464d48 SAMA5D4 LCDC: Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has no hardware cursor 2014-07-08 12:45:16 -06:00
Gregory Nutt
e76f10ceac SAMA5D3/4 HEAP: Add a configuration option to reserve DRAM for a framebuffer when executing out of DRAM. 2014-07-08 12:43:38 -06:00
Gregory Nutt
befcb1c961 Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
ca43955541 SAMA5D3/4: Fix two issues associated with PIO interrupts 2014-07-07 14:16:29 -06:00
Gregory Nutt
95bbdb675b SAMA5D3/4 I2C: Test for read or write operation was reversed. How could this have worked before? 2014-07-07 09:54:43 -06:00
Gregory Nutt
0d14befb88 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
4afc23d16d maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
c5fc24e110 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
858587d633 AMA5 OHCI: Pointers to allocated port values were not being nullified after being deallocated. This caused some assertions when debug was enabled 2014-07-04 08:17:14 -06:00
Gregory Nutt
1657e6296b Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
Gregory Nutt
71f6838129 Correct authorship on a few files 2014-07-03 18:28:26 -06:00
Gregory Nutt
9f5418e5d3 NET: More renaming 2014-07-03 17:53:16 -06:00
Gregory Nutt
44988c6ca6 Rename apps/examples/uip to apps/examples/webserver 2014-07-03 17:31:17 -06:00
Gregory Nutt
009eee331f SAMA5 OHCI: Fix an error in a DEBUGASSERT statement. Caused assertion to fire inappropriately when a low- or full-speed device is removed and CONFIG_DEBUG=y 2014-07-03 13:06:28 -06:00
Gregory Nutt
a5538e3431 SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why. 2014-07-03 12:28:11 -06:00
Gregory Nutt
dd4caf172f CCM PROCFS: Changed the configuration a bit. I am still not happy about the coupling between procfs, mtd, and now STM32 2014-07-03 08:50:24 -06:00
Gregory Nutt
64cd7a81ed Add STM32 CCM heep procfs 2014-07-03 08:18:24 -06:00
Gregory Nutt
edb5f312ca Move cypto debug definitions to debug.h with other susbsystem-level debug 2014-07-03 07:58:43 -06:00
Gregory Nutt
bb3dcccd98 Beginning of a crypto/ subsystem from Max Neklyudov 2014-07-03 07:42:44 -06:00
Gregory Nutt
6bfa7c1afa SAM4 AES driver from Max Neklyudov 2014-07-03 07:26:44 -06:00
Gregory Nutt
00ced07128 SAM Ethernet: Eliminate a warning 2014-07-02 17:35:41 -06:00
Gregory Nutt
a7933cc22b SAMA5D4-EK: NSH should run at 528MHz 2014-07-02 15:31:52 -06:00
Gregory Nutt
ee2725c146 SAMA5D4-EK: NSH configuration now has TWI0 enabled and supports the I2C tool 2014-07-02 13:51:57 -06:00
Gregory Nutt
1c198f6a86 SAMA5D4 EMAC: Add a kludge to work around a suspected hardware issue 2014-07-02 12:17:01 -06:00
Gregory Nutt
ca353a2644 SAM3/4 and SAMA5 Ethernet: Fix an error in the function that determines the number of free TX descriptors 2014-07-02 10:40:11 -06:00
Gregory Nutt
a2741940f9 SAMA54D-EK: Don't disable any features in the NSH configuration. Comments updated in several files 2014-07-02 08:54:53 -06:00
Gregory Nutt
400edda109 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
52dbbe76b2 SAMA5D4: Add a configuration option to force EMAC driver debug 2014-07-01 18:00:39 -06:00
Gregory Nutt
23e4d7db0a SAMA5D4: Fix error in EMAC driver (plus related EMAC/GMAC drivers) 2014-07-01 11:22:19 -06:00
Gregory Nutt
b0c1b7ef47 Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
da7379ed18 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
6b5f20cdc6 Fix typo/compile error introduced with last HSMCI changes 2014-06-30 16:08:29 -06:00
Gregory Nutt
c005ac91d7 SAM3/4: Important bugfix. Values read from PIO input pins do not change unless clocking to the PIO block is enabled 2014-06-30 14:26:09 -06:00
Gregory Nutt
588d0178a6 SAMA5D3/4: Fix some logic in conversion of physical and virtal DRAM addresses when running out of DRAM 2014-06-30 11:04:34 -06:00
Gregory Nutt
9a06ff38ec SAMA5D4: Don't touch ISLR unless PIO is configured as an interrupt 2014-06-30 09:17:42 -06:00
Gregory Nutt
ff03914a87 STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek 2014-06-30 08:16:17 -06:00
Gregory Nutt
a85a42ae0f STM32: Reorder MCUs in choice menu; remove duplicates. From Kosma Moczek 2014-06-30 08:13:12 -06:00
Gregory Nutt
d00bb6ab95 STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek 2014-06-30 08:09:19 -06:00
Gregory Nutt
292d2a1c1f Unconfigure GPIO pins when closing a serial port to prevent back effects from back-powering on the TX pin. From Kosma Moczek 2014-06-30 08:02:26 -06:00
Gregory Nutt
fa29170aa7 Make variable definitions 'static const' when possible to save RAM usage. From Kosma Moczek 2014-06-30 07:39:51 -06:00
Gregory Nutt
7780d1cd03 Fix typos in debug statements 2014-06-30 07:38:02 -06:00
Gregory Nutt
ac5ac198d2 SAMA5 PIO: Add support for secure interrupts; Fix PIO debug output 2014-06-29 17:46:55 -06:00
Gregory Nutt
a085646213 SAMA5: Remove kruft in PIO header file 2014-06-29 17:45:42 -06:00
Gregory Nutt
e8d90bf56d SAMA5D4 HSMCI: Fix a compiler in a debug statement 2014-06-29 12:01:08 -06:00
Gregory Nutt
2b626fa85a SAMA5D4 XDMA: Fix some typos 2014-06-29 11:24:57 -06:00
Gregory Nutt
43d13baf35 Fix system bus IDs for SAMA5D4; Don't use explicit PERIPHID_SHIFT for symmetry with memory 2014-06-29 11:24:10 -06:00
Gregory Nutt
63276f5864 SAMA5D: Don't use explicit DMACH_FLAG_MEMPID_SHIFT; it does not exist in the SAMA5D4 2014-06-29 09:52:07 -06:00
Gregory Nutt
a892171b04 SAMA5: Add configuration to assign an XDMAC channel to an HSMCI 2014-06-29 08:43:46 -06:00