Commit Graph

592 Commits

Author SHA1 Message Date
Gregory Nutt
2b3ec4172d arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. 2018-11-10 14:06:46 -06:00
Gregory Nutt
511c90d050 arch/x86/src/qemu/qemu_head.S: Correct .bss, IDLE stack, heap organization. 2018-10-26 15:48:22 -06:00
Daniel P. Carvalho
578114a74f configs/nucleo-l432kc: Added support for AT45DB Serial Flash 2018-10-25 16:12:59 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong. 2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte:
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
2018-06-06 09:54:30 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
b4f2b0dfc6 Remove all usage of printf() from the OS. That is not an acceptable context for the use of an application-oriented interface that depends on a task-specific file descriptor and C buffered I/O. 2018-03-03 15:20:21 -06:00
Gregory Nutt
2683f713ab Make sure that labeling is used consistently in all function headers (part 3). 2018-02-01 12:17:03 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
87a4181ba3 cosmetic changes 2017-04-29 09:30:17 -06:00
Gregory Nutt
b6b16bf4da Fix forward references that were mangled in last large changes. 2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
b656e371d3 ELF: Move sim and x86 ARM versions of ELF relocation logic to libc/machine 2017-01-21 15:40:51 -06:00
Gregory Nutt
3ed091376c In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts. 2017-01-13 11:08:24 -06:00
Aleksandr Vyhovanec
bf528f2071 packed_struct replaced by begin_packed_struct and end_packed_struct 2017-01-09 14:17:49 +03:00
Paul A. Patience
912fe06a86 Add architecture-specific inttypes.h 2016-10-27 16:01:38 -04:00
Gregory Nutt
d41008e220 Update some header commments 2016-08-06 18:16:31 -06:00
Gregory Nutt
e897ccb940 Rename x86 QEMU version of CONFIG_GPIO_IRQ to CONFIG_QEMU_GPIOIRQ 2016-07-22 14:54:00 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
873f1f6da5 Merged in HeathPetersen/nuttx (pull request #102)
EXEEXT only needs to be appended once
2016-07-15 17:11:22 -06:00
Heath Petersen
c57672aeab EXEEXT only needs to be appended once 2016-07-15 17:50:00 -05:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57 Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model. 2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27 Eliminate a warning 2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
0f18f3bd15 Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally 2016-06-19 09:39:21 -06:00
Gregory Nutt
ac18dc27ca Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported 2016-06-17 15:22:48 -06:00
Gregory Nutt
b39e53391d Add underscore at beginning of alert() as well 2016-06-16 12:38:05 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
a97d3ae707 Centralize definitions associated with CONFIG_DEBUG_GPIO 2016-06-15 09:20:23 -06:00
Gregory Nutt
01ee8ccc6c arch/x86/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 09:16:34 -06:00
Gregory Nutt
a98bc05f65 New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting. 2016-06-14 09:07:53 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
fb484a581f All GCC final arch/*/src/Makefiles: Allow --start-group and --end-group to be redefined for the case where GCC is used to link (instead of LD). Suggested by Paul Alexander Patience. 2016-05-17 10:43:15 -06:00
Gregory Nutt
99e695398c Rename up_boot to arm_boot 2016-05-12 13:42:49 -06:00
Gregory Nutt
aa64214877 FB: Add a display number to the framebuffer planeinfo structure 2016-04-17 10:08:27 -06:00
Gregory Nutt
48106e605a Merge in arch/ submodule 2016-04-10 07:49:41 -06:00
Gregory Nutt
bd846c2e72 All architectures: Register the schedule note driver if enabled 2016-03-17 17:00:59 -06:00
Gregory Nutt
4d4f54a789 Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs 2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98 Standard some naming if code sectino comments 2016-02-21 18:06:09 -06:00
Gregory Nutt
666cc280f4 Rename irqenable() to up_irq_enable(); rename irqdisable() to up_irq_disable() 2016-02-14 16:54:09 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 19:11:09 -06:00
Gregory Nutt
b0bcd82ba7 x86: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 17:10:44 -06:00
Gregory Nutt
7a13837fdd Remove the final vestiges of up_spiinitialize() 2016-01-27 09:26:14 -06:00
Gregory Nutt
71c289ce4f Rename all architecture files of form xyz_internal.h to just xyz.h 2015-12-29 18:07:11 -06:00
Gregory Nutt
927b1dcc1f Initialize the telnet factory as part of the common architecture intialization 2015-12-07 11:40:29 -06:00
Gregory Nutt
2afd4595e4 Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES 2015-11-26 06:59:35 -06:00
Gregory Nutt
4aa3dcb51a __KERNEL__ should be defined when compiler architecture specific logic 2015-11-25 18:05:36 -06:00
Gregory Nutt
14d7ede265 All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y 2015-11-25 17:10:41 -06:00
Gregory Nutt
79df561669 Rename board_led_off to board_autoled_off 2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3 Rename board_led_on to board_autoled_on 2015-11-01 09:07:06 -06:00
Gregory Nutt
7a63e976ad Remove TABs 2015-10-04 16:00:42 -06:00
Gregory Nutt
6fc6d17760 Fix some spacing problems 2015-10-04 14:59:08 -06:00
Gregory Nutt
cae0c9a2e3 Standardize the width of all comment boxes in header files 2015-10-02 17:47:23 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
26347891ac Apply same fix for ARMv7-M to other architectures 2015-09-30 11:21:04 -06:00
Gregory Nutt
26eada3446 In all up_initialize() functions, automatically initialize TUN driver is so configureded 2015-09-06 09:35:29 -06:00
Gregory Nutt
975d912b40 Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
Gregory Nutt
01cfe8c315 Networking: Move where the local loopback device is initialized from board_app_intiialize() to up_intiialize() so that it will happen automatically 2015-08-24 14:25:49 -06:00
Gregory Nutt
0843af5367 Fixes that call sched_resume_scheduler and sched_suspend_scheduler must include nuttx/sched.h 2015-07-29 16:51:26 -06:00
Gregory Nutt
eddf8161a5 Add scheduler resume/suspend calls to all implementations of up_release_pending() 2015-07-26 10:13:29 -06:00
Gregory Nutt
37969b8279 Add scheduler resume/suspend calls to all implementations of up_reprioritize_rtr() 2015-07-26 09:46:28 -06:00
Gregory Nutt
838c5355eb Correct resume scheduler hooks and add suspend scheduler hooks to all implementations of up_unblock_task 2015-07-26 09:07:47 -06:00
Gregory Nutt
a92c0a10ab Add scheduler resume/suspend calls in all implementations of up_block_task() 2015-07-26 08:31:23 -06:00
Gregory Nutt
9d98177daa Add logic to reset the replenish the sporadic scheduler when a task is resumed 2015-07-24 09:54:28 -06:00
Gregory Nutt
e9a3cc3457 Remove the arch/ subdirectory; replace it with a submodule 2015-07-22 10:56:22 -06:00
Gregory Nutt
8e4f3bddb6 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
652371c919 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
29136e51cc Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
b578c98fa9 Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc Clean up and review of header files for conformance to standards 2015-06-12 19:17:42 -06:00
Gregory Nutt
c5b15d0b31 Clean up and review of header files for conformance to standards 2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
be0fb09250 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
16814e2b00 Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
a5043d5e60 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
76007d28f5 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
c29995fd85 Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni 2015-02-28 07:14:37 -06:00
Gregory Nutt
503d2915c6 Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni 2015-02-28 07:14:37 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
beaf976626 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
f0d318c124 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
4f9998b4a8 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
8bac6b71ce SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
3465cb6138 SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
7b310711a1 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
ba3ecd67ac A little more clean-up of poll() error handling 2014-09-26 08:25:00 -06:00
Gregory Nutt
79eeb9f1b5 A little more clean-up of poll() error handling 2014-09-26 08:25:00 -06:00
Gregory Nutt
aaf190dcf6 ELF relocations. Some relocation types do not have a named symbol associated with them. The design did not account for that case 2014-09-09 16:52:51 -06:00
Gregory Nutt
c458e72b70 ELF relocations. Some relocation types do not have a named symbol associated with them. The design did not account for that case 2014-09-09 16:52:51 -06:00
Gregory Nutt
3dd3b1f5e2 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
56dc80cf59 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
64ab35b399 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
9aca0c1c84 Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
35b11a7533 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
45f3328247 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1 Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
dfdaeb31ac Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
9598412386 Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
07d98438be x86: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt 2014-08-28 07:30:34 -06:00
Gregory Nutt
05efa398ac x86: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt 2014-08-28 07:30:34 -06:00
Gregory Nutt
756054d745 Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
9bc9d2d86d Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
4d24c48901 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
57c066b7a3 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
2566ba7b1d Change naming of ELF interfaces from arch_ to up_ for consistency 2014-08-25 06:47:14 -06:00
Gregory Nutt
e0a48b60b6 Change naming of ELF interfaces from arch_ to up_ for consistency 2014-08-25 06:47:14 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
e1769b22f1 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
d798dd37a7 Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
23a334c066 Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
d4b56eb3cc Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
c9661ad5a7 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
736d3c169a Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
8bbbc5b255 Cosmetic changes to comments 2014-07-29 07:17:01 -06:00
Gregory Nutt
2861636015 Cosmetic changes to comments 2014-07-29 07:17:01 -06:00
Gregory Nutt
ae82fa65a6 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
40972de8d7 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
f8024cf409 More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
494387b33b Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
33d5d24964 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
eee82879cb Make sure that there is one space between if and condition 2014-04-12 12:53:19 -06:00
Gregory Nutt
303cc1902b Make sure that there is one space between if and condition 2014-04-12 12:53:19 -06:00
Gregory Nutt
66df3afd46 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
2fcc57edb0 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
5b9f1f54c2 Add option to dump buffered USB trace data on an assertion 2014-03-20 10:56:30 -06:00
Gregory Nutt
a2d53bf950 Add option to dump buffered USB trace data on an assertion 2014-03-20 10:56:30 -06:00
Gregory Nutt
2f42d9f115 QEMU i486: Minor updates to VGA driver 2014-03-08 10:56:19 -06:00
Gregory Nutt
c86c40f4e4 QEMU i486: Minor updates to VGA driver 2014-03-08 10:56:19 -06:00
Gregory Nutt
17faab1442 QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi 2014-03-08 09:24:46 -06:00
Gregory Nutt
088798ec98 QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi 2014-03-08 09:24:46 -06:00
Gregory Nutt
e43c7b7f1b QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi 2014-03-08 09:24:24 -06:00
Gregory Nutt
6dd1217bf9 QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi 2014-03-08 09:24:24 -06:00
Gregory Nutt
c903fffc4a x86: fix 'Error: .size expression for idle_stack does not evaluate to a constant' bug from Matt Campbell 2014-01-25 13:53:23 -06:00
Gregory Nutt
2c8a2bfffc x86: fix 'Error: .size expression for idle_stack does not evaluate to a constant' bug from Matt Campbell 2014-01-25 13:53:23 -06:00
Gregory Nutt
a26b03d0d0 rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
2f837ccd2a rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
8794536cf2 X86: Add a configuration option to select the -m32 compiler option when needed 2014-01-18 07:38:50 -06:00
Gregory Nutt
d96bfc2d9b X86: Add a configuration option to select the -m32 compiler option when needed 2014-01-18 07:38:50 -06:00
Gregory Nutt
d01808c603 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
692b087d07 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
b8085906b9 Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane 2013-11-01 11:16:51 -06:00
Gregory Nutt
f8b3dbaa61 Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane 2013-11-01 11:16:51 -06:00
Gregory Nutt
4aaee6fb3c Clean up some naming: fd vs. fildes vs. filedes and filep vs filp 2013-09-28 16:50:07 -06:00
Gregory Nutt
417f67c132 Clean up some naming: fd vs. fildes vs. filedes and filep vs filp 2013-09-28 16:50:07 -06:00
Gregory Nutt
2f772c84fd Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
70f0ffdfc5 Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
a954eb76b2 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
8ff1402958 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
4748599a43 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
f0c36e422f Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
3aa94411be Remove up_assert_code 2013-04-25 15:19:59 -06:00
Gregory Nutt
86b815373a Remove up_assert_code 2013-04-25 15:19:59 -06:00
Gregory Nutt
91e6580aff Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit 2013-04-24 07:17:49 -06:00
Gregory Nutt
69d3978837 Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit 2013-04-24 07:17:49 -06:00
Gregory Nutt
65fec0683a _exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit() 2013-04-18 16:15:20 -06:00
Gregory Nutt
5187631e30 _exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit() 2013-04-18 16:15:20 -06:00
Gregory Nutt
1a07e950ea Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files 2013-04-04 18:12:44 -06:00
Gregory Nutt
e94faba7f5 Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files 2013-04-04 18:12:44 -06:00
Gregory Nutt
1694955188 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
Gregory Nutt
23db0682b7 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
e29d6479c9 Corrections needed after further test of stack-based task arguments
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 23:37:11 +00:00
patacongo
a31d1f331b Corrections needed after further test of stack-based task arguments
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 23:37:11 +00:00
patacongo
c496b7aad9 Copy siginfo_t to step before calling a user-space signal handler
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 20:02:14 +00:00
patacongo
ee885b45d8 Copy siginfo_t to step before calling a user-space signal handler
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 20:02:14 +00:00
patacongo
a7b37da2d9 Add a up_stack_frame() interface to allocate a frame of data on a task's stack.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5768 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 17:35:08 +00:00
patacongo
170952d6e8 Add a up_stack_frame() interface to allocate a frame of data on a task's stack.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5768 42af7a65-404d-4744-a932-0658087f49c3
2013-03-21 17:35:08 +00:00
patacongo
c86f502f2e In the kernel build, allocate the stacks for kernel threads from the kernel heap so that they are protected from medddling by the applications
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5766 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 20:27:08 +00:00
patacongo
f58faf514e In the kernel build, allocate the stacks for kernel threads from the kernel heap so that they are protected from medddling by the applications
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5766 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 20:27:08 +00:00
patacongo
020cc2248e Change prototypes of up_create_stack and up_release_stack to include a task type parameter
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5765 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 18:22:21 +00:00
patacongo
3bf2c1b355 Change prototypes of up_create_stack and up_release_stack to include a task type parameter
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5765 42af7a65-404d-4744-a932-0658087f49c3
2013-03-20 18:22:21 +00:00
patacongo
c85fcaecdb Rename g_heapbase to g_idle_topstack; Fix kernel build heap allocation which cannot use g_heapbase
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5739 42af7a65-404d-4744-a932-0658087f49c3
2013-03-14 14:42:52 +00:00
patacongo
d64396b44b Rename g_heapbase to g_idle_topstack; Fix kernel build heap allocation which cannot use g_heapbase
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5739 42af7a65-404d-4744-a932-0658087f49c3
2013-03-14 14:42:52 +00:00
patacongo
3dc5b1fa9f Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
2013-03-10 15:32:33 +00:00
patacongo
1ef904003e Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
2013-03-10 15:32:33 +00:00
patacongo
e47c64204c More changes for a kernel-mode allocator (more to be done)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
2013-03-09 21:12:20 +00:00
patacongo
1c52dce216 More changes for a kernel-mode allocator (more to be done)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
2013-03-09 21:12:20 +00:00
patacongo
9207732f18 Add debug output when memory allocations fail
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5686 42af7a65-404d-4744-a932-0658087f49c3
2013-02-28 15:31:58 +00:00
patacongo
be1b67a1a2 Add debug output when memory allocations fail
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5686 42af7a65-404d-4744-a932-0658087f49c3
2013-02-28 15:31:58 +00:00
patacongo
bc69dc2c5a Rename _TCB to struct tcb_s
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5610 42af7a65-404d-4744-a932-0658087f49c3
2013-02-04 18:46:28 +00:00
patacongo
b48009644f Rename _TCB to struct tcb_s
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5610 42af7a65-404d-4744-a932-0658087f49c3
2013-02-04 18:46:28 +00:00
patacongo
b27ce2030e Misc clean; mark assertions as non-returning; allow toolchain prefix to be overriden from make command line
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5591 42af7a65-404d-4744-a932-0658087f49c3
2013-01-31 23:29:34 +00:00
patacongo
1b94639432 Misc clean; mark assertions as non-returning; allow toolchain prefix to be overriden from make command line
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5591 42af7a65-404d-4744-a932-0658087f49c3
2013-01-31 23:29:34 +00:00
patacongo
b1aa82fcca Add syslog.h; rename lib_rawprintf() to syslog()
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 21:55:16 +00:00
patacongo
ad430fc198 Add syslog.h; rename lib_rawprintf() to syslog()
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 21:55:16 +00:00
patacongo
1b8979d24f Serial driver needed even when no console; Fix user LED settings in all STM32 configurations
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 15:03:17 +00:00
patacongo
40717da192 Serial driver needed even when no console; Fix user LED settings in all STM32 configurations
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
2013-01-28 15:03:17 +00:00
patacongo
6cfe0a45e9 Move stream data from TCB to task group structure.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5569 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 22:25:21 +00:00
patacongo
a71843ef91 Move stream data from TCB to task group structure.
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5569 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 22:25:21 +00:00
patacongo
43659b5840 Move file data from TCB to task group
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5567 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 20:17:29 +00:00
patacongo
ff293217de Move file data from TCB to task group
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5567 42af7a65-404d-4744-a932-0658087f49c3
2013-01-26 20:17:29 +00:00
patacongo
71a8d7d104 Fix poll/select issue reported by Qiang
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5559 42af7a65-404d-4744-a932-0658087f49c3
2013-01-24 19:19:38 +00:00
patacongo
a59665cddc Fix poll/select issue reported by Qiang
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5559 42af7a65-404d-4744-a932-0658087f49c3
2013-01-24 19:19:38 +00:00
patacongo
cd20adb63d Patches from Petteri Aimonen + stdbool and rand() changes for Freddie Chopin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5415 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 16:00:56 +00:00
patacongo
5306523bce Patches from Petteri Aimonen + stdbool and rand() changes for Freddie Chopin
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5415 42af7a65-404d-4744-a932-0658087f49c3
2012-12-07 16:00:56 +00:00