Sebastien Lorquet
c70d797229
misc archs
2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643
Correct mispelling
2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1
net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.
2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
86239d4a73
Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers.
2017-03-03 14:45:09 -06:00
Gregory Nutt
a581e9206d
Convert remaining serial drivers to use use irq_attach.
2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0
Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX.
2017-02-24 15:58:17 -06:00
Gregory Nutt
1d290c2b37
setvbuf: Add support for disabling I/O buffering. Initially cut; untested.
2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110
up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.
2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c
In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts.
2017-01-13 11:08:24 -06:00
Gregory Nutt
13d00344c9
Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10
2017-01-02 07:16:47 -06:00
Gregory Nutt
3a0413c048
Back out most of 34be3e7c3c
and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10.
2017-01-01 16:29:03 -06:00
Gregory Nutt
34be3e7c3c
Add configuration support for builds with Ubuntu under Windows 10
2017-01-01 15:34:23 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
41e35c88bf
eZ80 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 10:43:35 -06:00
Gregory Nutt
934aded293
arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:06:48 -06:00
Paul A. Patience
544f9ccf8a
ez80: Add *PTR definitions to inttypes.h
2016-10-27 16:16:13 -04:00
Paul A. Patience
912fe06a86
Add architecture-specific inttypes.h
2016-10-27 16:01:38 -04:00
Gregory Nutt
56f2454c86
Fix names of pre-processor variables used in header file idempotence
2016-08-06 18:48:45 -06:00
Gregory Nutt
d41008e220
Update some header commments
2016-08-06 18:16:31 -06:00
Gregory Nutt
4b4dbc79a2
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05
devrandom_register() must be called before devurandom_register()
2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06
Rename up_rnginitialize to devrandom_register
2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f
This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write.
2016-07-17 06:42:26 -06:00
Gregory Nutt
7b298a828d
up_pminitialize() needs to be called from instances of up_initialize()
2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97
All architectures: Add logic to automatically register /dev/ptmx a boot time
2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7
SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup
2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57
Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.
2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27
Eliminate a warning
2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8
Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly
2016-06-20 16:11:50 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
2016-06-20 08:57:08 -06:00
Gregory Nutt
0f18f3bd15
Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally
2016-06-19 09:39:21 -06:00
Gregory Nutt
ac18dc27ca
Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported
2016-06-17 15:22:48 -06:00
Gregory Nutt
b39e53391d
Add underscore at beginning of alert() as well
2016-06-16 12:38:05 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
a98bc05f65
New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting.
2016-06-14 09:07:53 -06:00
Gregory Nutt
3c2050040c
arch/z80/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-13 18:55:24 -06:00
Gregory Nutt
0f249016a0
Eliminate some warnings
2016-06-13 14:01:32 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Gregory Nutt
5ef3e3e215
Replace confusing references to uIP with just 'the network'
2016-05-30 11:52:07 -06:00
Gregory Nutt
2a87741e72
Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER
2016-05-25 10:45:01 -06:00
Gregory Nutt
48106e605a
Merge in arch/ submodule
2016-04-10 07:49:41 -06:00
Gregory Nutt
bd846c2e72
All architectures: Register the schedule note driver if enabled
2016-03-17 17:00:59 -06:00
Gregory Nutt
4d4f54a789
Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs
2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98
Standard some naming if code sectino comments
2016-02-21 18:06:09 -06:00
Gregory Nutt
83bc1c97c3
Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()
2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
2016-02-13 19:11:09 -06:00
Gregory Nutt
24428f7a59
z80 family: Replace explict references to g_readytorun with indirect references via the this_task() macro
2016-02-06 17:32:25 -06:00
Gregory Nutt
1166e311b0
Networking: Remove the HSEC argument from devif_timer.
2016-02-03 11:17:15 -06:00
Gregory Nutt
1e4f2ae2c1
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
2016-02-02 12:08:23 -06:00
Gregory Nutt
d2571985ef
I2C: up_i2creset should not be a global function; Now it is an I2C interface method
2016-02-02 11:21:45 -06:00
Gregory Nutt
0693e76be8
I2C: Remove the setfrequency method from the interface
2016-02-01 16:30:29 -06:00
Gregory Nutt
bec6f373a7
I2C: Cosmetic changes
2016-02-01 14:15:52 -06:00
Gregory Nutt
a64f36a63e
I2C: Remove setaddress method
2016-02-01 12:14:20 -06:00
Gregory Nutt
ce988c7ed3
Remove the read and write methods from the I2C interface
2016-02-01 09:22:10 -06:00
Gregory Nutt
2171438c61
I2C_TRANSFER support is no longer optional
2016-01-31 14:00:53 -06:00
Gregory Nutt
2d41fb26b8
z8 I2C driver now supports the I2C_TRANSFER method
2016-01-31 13:49:34 -06:00
Gregory Nutt
74d2073fca
ez80: Fix some compile errors when I2C_TRANSFER is enabled
2016-01-31 13:08:43 -06:00
Gregory Nutt
e4629af2bc
ez80: Add I2C_TRANSFER method to the I2C driver; Fixes for working with ZDS-II toolchain (still some problems with internal errors; Various fixes due to bit rot
2016-01-31 12:43:14 -06:00
Gregory Nutt
531d73af41
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
2016-01-30 08:35:46 -06:00
Gregory Nutt
9f9b85a932
Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h
2016-01-30 07:59:44 -06:00
Gregory Nutt
f002980b50
For eZ80 MCUs, rename up_spiinitialize to ez80_spibus_initialize
2016-01-27 08:39:02 -06:00
Gregory Nutt
52109ade2d
Flesh out unfinished lock() method implementations in al SPI drivers
2016-01-24 09:15:57 -06:00
Gregory Nutt
b7cbbab761
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
2016-01-23 18:10:21 -06:00
Gregory Nutt
4bd6adb725
Add dummy hwfeatures method to all SPI interfaces
2016-01-23 15:09:38 -06:00
Gregory Nutt
10001f8556
WINTOOl should be selected only for Cygwin. MSYS and native should not have it.
2016-01-09 16:34:33 -06:00
Gregory Nutt
927b1dcc1f
Initialize the telnet factory as part of the common architecture intialization
2015-12-07 11:40:29 -06:00
Gregory Nutt
e5e631e57f
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:07:18 -06:00
Gregory Nutt
14d7ede265
All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y
2015-11-25 17:10:41 -06:00
Gregory Nutt
076b05b460
In Kconfig of all CPUs with 16-bit address, force CONFIG_MM_SMALL=y
2015-11-23 12:16:35 -06:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
Gregory Nutt
7a63e976ad
Remove TABs
2015-10-04 16:00:42 -06:00
Gregory Nutt
6fc6d17760
Fix some spacing problems
2015-10-04 14:59:08 -06:00
Gregory Nutt
36726b1bc4
Standardize the width of all comment boxes in header files
2015-10-02 17:42:29 -06:00
Gregory Nutt
26347891ac
Apply same fix for ARMv7-M to other architectures
2015-09-30 11:21:04 -06:00
Gregory Nutt
26eada3446
In all up_initialize() functions, automatically initialize TUN driver is so configureded
2015-09-06 09:35:29 -06:00
Gregory Nutt
975d912b40
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:37 -06:00
Paul A. Patience
a0dc724a5d
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.
2015-09-01 13:47:06 -04:00
Gregory Nutt
fa9522da41
Missed one file in last commit
2015-08-24 14:30:58 -06:00
Gregory Nutt
0843af5367
Fixes that call sched_resume_scheduler and sched_suspend_scheduler must include nuttx/sched.h
2015-07-29 16:51:26 -06:00
Gregory Nutt
eddf8161a5
Add scheduler resume/suspend calls to all implementations of up_release_pending()
2015-07-26 10:13:29 -06:00
Gregory Nutt
37969b8279
Add scheduler resume/suspend calls to all implementations of up_reprioritize_rtr()
2015-07-26 09:46:28 -06:00
Gregory Nutt
838c5355eb
Correct resume scheduler hooks and add suspend scheduler hooks to all implementations of up_unblock_task
2015-07-26 09:07:47 -06:00
Gregory Nutt
a92c0a10ab
Add scheduler resume/suspend calls in all implementations of up_block_task()
2015-07-26 08:31:23 -06:00
Gregory Nutt
9d98177daa
Add logic to reset the replenish the sporadic scheduler when a task is resumed
2015-07-24 09:54:28 -06:00
Gregory Nutt
e9a3cc3457
Remove the arch/ subdirectory; replace it with a submodule
2015-07-22 10:56:22 -06:00
Gregory Nutt
8e4f3bddb6
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
652371c919
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
fb926e7283
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
29136e51cc
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Gregory Nutt
b578c98fa9
Clean up and review of header files for conformance to standards
2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc
Clean up and review of header files for conformance to standards
2015-06-12 19:17:42 -06:00
Gregory Nutt
c5b15d0b31
Clean up and review of header files for conformance to standards
2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
Gregory Nutt
be0fb09250
Clean up and review of header files for conformance to standards
2015-06-12 19:00:52 -06:00
Gregory Nutt
d77a19f0a2
Two r's and only two r's in the word interrupt
2015-04-23 14:04:43 -06:00
Gregory Nutt
0092f79696
Two r's and only two r's in the word interrupt
2015-04-23 14:04:43 -06:00
Gregory Nutt
ae15c6963c
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
16814e2b00
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
a5043d5e60
Add support for dumping board-specific information on assertion. From David Sidrane
2015-03-04 07:00:29 -06:00
Gregory Nutt
76007d28f5
Add support for dumping board-specific information on assertion. From David Sidrane
2015-03-04 07:00:29 -06:00
Gregory Nutt
429863f348
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 17:19:38 -06:00
Gregory Nutt
beaf976626
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 17:19:38 -06:00
Gregory Nutt
f0d318c124
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
2015-02-09 16:12:11 -06:00
Gregory Nutt
4f9998b4a8
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
2015-02-09 16:12:11 -06:00
Gregory Nutt
8bac6b71ce
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
3465cb6138
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
7e46e94546
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
9588b0e7a7
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
32d2a4c548
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
1ad73c52b1
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
a53ae59284
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
92f440c20c
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
278c485229
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
89538ac4a2
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
2f4aa0bde7
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
2c1f018e85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
Gregory Nutt
2994448d85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
Gregory Nutt
2330c9c842
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
63526fb1ef
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
388ef8db1a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
db9901e2f9
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
Gregory Nutt
7b310711a1
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
Gregory Nutt
eb5e1616f4
Move include/nuttx/gran.h to include/nuttx/mm/gran.h
2014-09-24 06:55:26 -06:00
Gregory Nutt
2fa7431ee7
Move include/nuttx/gran.h to include/nuttx/mm/gran.h
2014-09-24 06:55:26 -06:00
Gregory Nutt
998c5ee0a9
Trivial kernel build related fixes for consistency
2014-09-11 12:35:23 -06:00
Gregory Nutt
17e798993d
Trivial kernel build related fixes for consistency
2014-09-11 12:35:23 -06:00
Gregory Nutt
006cf7d745
Add logic to initialize the per-process user heap when each user process is started
2014-09-10 15:55:36 -06:00
Gregory Nutt
205c23b9d6
Add logic to initialize the per-process user heap when each user process is started
2014-09-10 15:55:36 -06:00
Gregory Nutt
3dd3b1f5e2
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
Gregory Nutt
56dc80cf59
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
Gregory Nutt
64ab35b399
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
205260d5e2
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
bcb5a5316e
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
2014-08-31 16:24:24 -06:00
Gregory Nutt
9aca0c1c84
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
Gregory Nutt
e3ff0689bb
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
Gregory Nutt
35b11a7533
Fix an error introduced into ALL implmentations of interrupt dispatch logic
2014-08-28 08:41:57 -06:00
Gregory Nutt
45f3328247
Fix an error introduced into ALL implmentations of interrupt dispatch logic
2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1
Add address environment support to ALL implementatins of up_release_pending()
2014-08-28 08:10:19 -06:00
Gregory Nutt
dfdaeb31ac
Add address environment support to ALL implementatins of up_release_pending()
2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc
Add address environment support to ALL implementatins of up_reprioritize_rtr()
2014-08-28 07:54:07 -06:00
Gregory Nutt
9598412386
Add address environment support to ALL implementatins of up_reprioritize_rtr()
2014-08-28 07:54:07 -06:00
Gregory Nutt
c61a64e44e
Z80: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt
2014-08-28 07:38:05 -06:00
Gregory Nutt
4b65c894f6
Z80: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt
2014-08-28 07:38:05 -06:00
Gregory Nutt
756054d745
Add ADDRENV support to ALL implmentations of _exit()
2014-08-27 16:31:02 -06:00
Gregory Nutt
9bc9d2d86d
Add ADDRENV support to ALL implmentations of _exit()
2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4
Add ADDRENV support to ALL implementations of up_unblock_task()
2014-08-27 16:15:46 -06:00
Gregory Nutt
4d24c48901
Add ADDRENV support to ALL implementations of up_unblock_task()
2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604
Add ADDRENV support to all implementations of up_block_task()
2014-08-27 15:36:52 -06:00
Gregory Nutt
57c066b7a3
Add ADDRENV support to all implementations of up_block_task()
2014-08-27 15:36:52 -06:00
Gregory Nutt
032ff50313
Add up_addrenv_coherent which will be called before address environment switches
2014-08-26 14:53:19 -06:00
Gregory Nutt
0db7da1858
Add up_addrenv_coherent which will be called before address environment switches
2014-08-26 14:53:19 -06:00
Gregory Nutt
e8094292e3
Rename up_addrenv_assign() to up_addrenv_clone() and generalize its arguments so that can be used for other purposes
2014-08-26 12:16:05 -06:00
Gregory Nutt
b13d9b4161
Rename up_addrenv_assign() to up_addrenv_clone() and generalize its arguments so that can be used for other purposes
2014-08-26 12:16:05 -06:00
Gregory Nutt
699a54a022
Misc changed to get the SAMA5 ELF configuration with address environments working
2014-08-25 13:28:13 -06:00
Gregory Nutt
1725946447
Misc changed to get the SAMA5 ELF configuration with address environments working
2014-08-25 13:28:13 -06:00
Gregory Nutt
dde84a0a20
addrenv interface changes: up_addrenv_create() may need to create .text and .bss/.data separately because of differing access privileges (read/execute vs read/write). And, as a consequence, up_addrenv_vaddr() needs to be split into up_addrenv_vtext(0 and up_addrenv_vdata().
2014-08-24 11:54:14 -06:00
Gregory Nutt
241a7e17bd
addrenv interface changes: up_addrenv_create() may need to create .text and .bss/.data separately because of differing access privileges (read/execute vs read/write). And, as a consequence, up_addrenv_vaddr() needs to be split into up_addrenv_vtext(0 and up_addrenv_vdata().
2014-08-24 11:54:14 -06:00
Gregory Nutt
95c79c675c
Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment
2014-08-24 09:57:53 -06:00
Gregory Nutt
2cb9d5c7b0
Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment
2014-08-24 09:57:53 -06:00
Gregory Nutt
66abb71c57
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
2014-08-24 06:42:11 -06:00
Gregory Nutt
1624e2fbcf
Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support
2014-08-24 06:42:11 -06:00
Gregory Nutt
f58ba70547
A few fixes for compilation errors due to recent address environment fixes
2014-08-22 15:55:00 -06:00
Gregory Nutt
e79d6e3c8b
A few fixes for compilation errors due to recent address environment fixes
2014-08-22 15:55:00 -06:00
Gregory Nutt
d40553b538
An address environment is the property of a task group, not of a thread
2014-08-22 12:32:34 -06:00
Gregory Nutt
1d586e6136
An address environment is the property of a task group, not of a thread
2014-08-22 12:32:34 -06:00
Gregory Nutt
2bc16b2ba5
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
Gregory Nutt
ad9b3f8ab8
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
Gregory Nutt
6455f60c60
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
Gregory Nutt
e1769b22f1
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
Gregory Nutt
d798dd37a7
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec
Move task control files from sched/ to sched/task
2014-08-08 16:44:08 -06:00
Gregory Nutt
23a334c066
Move task control files from sched/ to sched/task
2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1
Move clock functions from sched/ to sched/clock
2014-08-08 14:43:02 -06:00