Gregory Nutt
6c4405561a
Fix a few compile errors and warnings found in build testing
2017-08-12 10:27:55 -06:00
Gregory Nutt
aeb59383cf
Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 15:26:09 -06:00
Gregory Nutt
f3f522514e
libm: Eliminate a warning from lgamma(); Update some comments; Add some logic to handle broadcast better -- Currently conditioned out because it does not work.
2017-08-08 12:08:43 -06:00
Gregory Nutt
09f31d1371
Spirit Radio: Add support for CSMA backoff count reached interrupt.
2017-08-08 10:34:51 -06:00
Gregory Nutt
79400ea960
B-L475-IOT01A: Enable UDP broadcast test in the spirit-starhub configuration.
2017-08-08 08:32:41 -06:00
Gregory Nutt
572cf51fa4
Networking: Rethink IPv6 all-nodes packet routing.
2017-08-08 07:48:07 -06:00
Gregory Nutt
6e3ced4111
Spirit: Make error handling for discarded packets match other RX failure interrupts.
2017-08-07 13:52:42 -06:00
Gregory Nutt
1ac4848686
Spirit bugfixes: Was hanging occasionally because there was not mechanism to restart the poll timer if poll was not performed because Spirit ws busy. Fixed by not checking if Spirit is busy. The TX poll can be performed asynchronouly while spirit is busy; any outgoing data will queued until Spirit is ready. Fixed handling of a timeout condition. Failure to transmition to the TX state would fail (timeout) if in a race condition Spirit already committed to the RX state. The driver needs to recover the state properly and avoid debug assertions in this event.
2017-08-07 09:22:16 -06:00
Gregory Nutt
e57a5755cc
TX timeout must also be cancelled on a TX error. TX timeout should check if we are waiting for a TXto complete. TX timeout was too short (short than the maximum number of retries).
2017-08-06 16:56:02 -06:00
Gregory Nutt
bbf1ad4ea6
Spirit network driver: TX timeout was never being cancelled! Also reviewed and cleaned up all error handling logic
2017-08-06 15:40:37 -06:00
Gregory Nutt
48a507c0b7
6LoWPAN: When obtaining the radio MAC address from the IP address, handle the special case of broadcast and multicast address.
2017-08-06 13:50:48 -06:00
Gregory Nutt
84001f79a0
Spirit Network Driver: Add support for watermark interrupts on RX FIFO. Reduce max packet length to avoid an errata.
2017-08-06 10:10:55 -06:00
Gregory Nutt
3b1e2ac4fd
Spirit network driver: Restructure threading to reduce locking. Still get a few RX FIFO errors.
2017-08-06 08:26:51 -06:00
Gregory Nutt
2947ca06c9
Avoid some harsh, inappropriate DEBUGASSERT's.
2017-08-05 12:32:31 -06:00
Gregory Nutt
a29a168086
Spirit + 6LoWPAN: In STAR configuration, Spirit must use a configured well known hub address. 6LoWPAN cannot assume that the PAN coordinator is the STAR hub; it must ask the radio to provide it with the address of the star hub
2017-08-05 09:13:29 -06:00
Gregory Nutt
c2fbef2062
b-l475e-iot01a: Add configurations to support a star topology.
2017-08-05 07:53:55 -06:00
Gregory Nutt
5d96385c52
Spirit: Increase number of retries if there is no acknowledgement; Add interrupt handling for the case where the max number of retries expires. Fix some badly implemented queue management code. With these changes the basic UDP and TCP tests work.
2017-08-04 15:20:10 -06:00
Gregory Nutt
8027d1bf18
Spirit: Enable AutoACK, TX retries, and RX timeouts in the network driver.
2017-08-04 13:16:07 -06:00
Gregory Nutt
0d551cd0ac
Spirit: Convert network driver to use STack packets vs. Basic packets. We need to use the STack packets in order to provide the source address.
2017-08-04 12:19:59 -06:00
Gregory Nutt
df51b69895
Spirit: Commit some trivial changes in preparation for a more substantial change.
2017-08-04 12:19:59 -06:00
Gregory Nutt
733d96cf81
Spirit: Correct setting of the length width field; Add multicast and broadcast addresses to radio properities.
2017-08-04 12:19:59 -06:00
Gregory Nutt
f6ebcc2220
Spirit network driver: Need to enable sending of TX address. Moved some non-optional settings out of board.h to driver.
2017-08-04 12:19:58 -06:00
Gregory Nutt
36e7a18181
spirit: Modify reg needs to toggle CS to get the correct status. Remove some delbug left in last commit. make sprit_unlock an inline function.
2017-08-03 15:15:15 -06:00
Gregory Nutt
d2b5078e01
Spirit: Mostly cosmetic fixes to names and comments. Tx timeout should run on the HP work queue.
2017-08-03 11:47:38 -06:00
Gregory Nutt
76c9ef4844
Spirit: Fix a few RX-related issues.
2017-08-03 11:08:33 -06:00
Gregory Nutt
b3e788e11b
Spirit: Fix typos in conditional compilation. Add debug output. Remove extra clear of pending interrupts, could cause missing interrupts. Add spirit_reg_modify() which is not currently used.
2017-08-03 09:55:30 -06:00
Gregory Nutt
8a785c4b66
Spirit Network Device: Fix a deadlock. Also several other design improvements to eliminate corner cases.
2017-08-03 08:37:05 -06:00
Gregory Nutt
1ae9748170
Networking: Add support for some packet radio IOCTL commands; Spirit: Fix a few bugs from testing.
2017-08-02 11:53:03 -06:00
Gregory Nutt
a6fa3b311d
b-l475e-iot91a: Add apps/examples/nettest and eamples/udp to Spirit1 configuration. Add telnet support. fix driver statistics configuration.
2017-08-02 07:01:42 -06:00
Gregory Nutt
1275c3e249
Spirit: Network driver needs to setup IP address based on configured node address. If no node address is provided, then it will use a default. Also upate a README.
2017-08-01 16:33:34 -06:00
Gregory Nutt
735095d040
Spiri: Fixe some typos. One is critical since it is conditional compilation.
2017-08-01 15:18:40 -06:00
Gregory Nutt
09bb6ff16b
Spirit: Add more debug output. Make sure device is in READY state after reset and before changing to STANDBY.
2017-08-01 13:48:59 -06:00
Gregory Nutt
ceca6c69a8
Spirit: Add a function to wait for a state change with a timeout.
2017-08-01 10:31:12 -06:00
Gregory Nutt
2cb5ec542b
Spirit: Fix a bad debug assertion.
2017-08-01 09:01:46 -06:00
Gregory Nutt
959f2042a4
IoT Board/Spirit: Fix a few issues that interfered with testing. Move console to the VCOM port (USART) for all configurations. Rename the spirit-mac configuration to spirit-6lowpan. Add lots of debug output the spirit network driver.
2017-07-31 18:26:17 -06:00
Gregory Nutt
1e24404dcc
Squashed commit of the following:
...
commit f97da3a546f9d6e1b858cfc45538a06b62396034
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 19:09:46 2017 -0600
Network: Condition out some types that depend on definitions that are only available with 6LoWPAN is enabled.
commit 312e9dc1195527100e12bf6be8b629f5b29be1f6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 18:57:23 2017 -0600
6LoWPAN: Fix case where source and destination IP address were backward. Fix some compile issues when star topology support is enabled.
commit 3b0e71c5807194fbb006d0560bb2c98133055ba3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 16:01:48 2017 -0600
6LoWPAN PktRadio: Finishes up all logic; Lots of misc changes from build testing.
commit cc118f8cb335e1c48354fd7112e20be57de50b68
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 12:41:18 2017 -0600
6LoWPAN: Remove explicate type struct ieee802154_frame_meta_s from derive interface methods. Replace with a opaque void * type so that other radio meta data structures may use the interfaces. Add a new radion interface to get properties of the radio. Spirit: Finish packet I/O interface with the network.
commit 1aa0a63e8341ca5f9f88c294f96d1740459146d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 07:57:15 2017 -0600
6LoWPAN: Replace metadata input parameter type from struct ieee802154_data_ind_s to void*. This permits radios with different MAC metadata to interact with 6LoWPAN. Includes many changes to handle variable length radio addresses. No longer just short and exteneded; any length.
commit 46266ace61ae6246123873935436d864c7de31e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 17:50:42 2017 -0600
Spirit: Fix typos in SPI debug code.
commit 27c6b235f6a2d3b2f08da4920b224a40e9991f59
Merge: 7029dffd02 7f53e089175889ce65f538f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-30 19:11:23 -06:00
Gregory Nutt
7f53e08917
Squashed commit of the following:
...
commit 7029dffd02156bcbfa84262671c2ca766a117191
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 12:02:13 2017 -0600
6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios.
commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 10:16:23 2017 -0600
6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN.
commit c6dbf9178539b7da75e492ffd1d1f93c9c326299
Merge: da782d6cdf 5889ce65f538f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-29 13:42:26 -06:00
Gregory Nutt
5889ce65f5
Squashed commit of the following:
...
commit da782d6cdff5980d71aaa2da5f9c28ab3438d085
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 07:26:48 2017 -0600
Spirit: Completes port of the spirit radio library to NuttX.
commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 17:42:51 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 692a27da396b7683749790923d8fa085091764f1
Merge: 27c0a6ec08 38f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-29 07:29:07 -06:00
Gregory Nutt
38f79543dc
Squashed commit of the following:
...
commit 27c0a6ec0813187f125922c81189a70cf04d83d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 15:47:27 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 96657af2831487724723a60084831619257fd953
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 14:20:14 2017 -0600
Spirit: Bring in more radio interface functions.
commit 640d55399b54a019be68825668fca1446abd082f
Merge: 3fcf84a9a2 47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-28 15:48:47 -06:00
Gregory Nutt
47791442a0
Squashed commit of the following:
...
commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:00:31 2017 -0600
Spirit: Brings in the last of the PktCommon interfaces.
commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:54:52 2017 -0600
Spirit: Add a few more PktCommon interfaces.
commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:33:31 2017 -0600
libc/termios: Remember block comments before empty file sections.
commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821
Author: Sebastien Lorquet <sebastien@lorquet.fr>
Date: Fri Jul 28 09:31:00 2017 -0600
tcdrain implementation based on a new term ioctl
commit 797d4adf7d41068c671f0217d369b797b269de1a
Author: Stefan Kolb <Stefan.Kolb@avat.de>
Date: Fri Jul 28 09:19:04 2017 -0600
We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load.
The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled).
The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully.
commit e298f48e96d9e34017dcab8e4d87032862ae9322
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:06:26 2017 -0600
Spirit: Bring in PktStack interfaces.
commit 4a0f00a7058312dcf6ac392689b9f69112f613ec
Merge: 855cf97130 b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-28 12:01:05 -06:00
Gregory Nutt
b458934ac4
Squashed commit of the following:
...
commit 855cf9713052a851a1daeb3842db2edd6ff6f658
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 18:03:56 2017 -0600
Spirit Network Driver: Add some hooks that will eventually support address filtering.
commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 17:13:21 2017 -0600
Spirit: Add a PktStack header file.
commit 705e8fff6a21264ab751fb34c107cb109430ac89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 15:00:03 2017 -0600
Spirit: Bring in last of timer interfaces.
commit f8984b2f82e165f5bba132d6b099222d1beb1fbd
Merge: cb79778a30 f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-27 18:04:35 -06:00
Gregory Nutt
f287cc25d6
Squashed commit of the following:
...
commit cb79778a3044ae97a1cc615dfa24099144f04bd0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 11:46:31 2017 -0600
Spirit: Bring in last of QI interfaces.
commit 0245b330a33aa73531b82ae261b1312be9922e0f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 10:14:34 2017 -0600
Spirit: Add general interfaces.
commit 121845a8f229ec2c88e5721da5512135f6624ee5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 09:41:23 2017 -0600
Spirit: Bring in last of GPIO interfaces.
commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 17:09:19 2017 -0600
Spirit: Add some missing configuration options: Add register -level debug options.
commit 4be89324a5908e35afc70373c279f4d05f62b48f
Merge: 66e87f9bb3 598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-27 11:56:26 -06:00
Gregory Nutt
598386ef90
Squashed commit of the following:
...
commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 15:19:56 2017 -0600
Spirit: Brings in last of PktBasic logic.
commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 11:55:50 2017 -0600
Spirit: Bring in AES and MBUS logic.
commit d00022d39ab0ce839de29386949481e5c24feff3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 09:22:03 2017 -0600
Spirit: Bring in remainder of calibration interfaces.
commit 40b4b2f902e04293f8940551a97a9a24a48988dd
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 08:44:32 2017 -0600
Spirit: Bring in DirectRF interfaces.
commit 7c109608e1a2989f3edbc2fd939a2d225fff382a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 07:46:19 2017 -0600
Spirit: Add CSMA support.
commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 18:57:43 2017 -0600
Spirit: Add some initial TX logic to network driver.
commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 17:02:11 2017 -0600
Spirit: Completes ports of spirit_management.* files
commit c904eef51d929e041b87d0c8aff6fa3c2f895341
Merge: 91e985a877 c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-26 15:35:42 -06:00
Gregory Nutt
c9ff8cbab9
Squashed commit of the following:
...
commit 91e985a87729017a66d19276c4d47681064f95ea
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 15:13:54 2017 -0600
Spirit: Add a few more functions that will soon be needed for packet transmission.
commit b5981d29983907c2194fbc26af4b72ad532bee78
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 13:30:07 2017 -0600
Spirit: Finish off some initialization issues; Started some interrupt handling logic.
commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 09:35:52 2017 -0600
Spirit: Completes very basic radio initialization for network driver
commit 1b544334361c54f46bcf0ba313c125932e8dafc6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 07:58:30 2017 -0600
Spirit: Add more radio initialization logic... getting closer.
commit 45d1047db60843c57d394ec910c63e7c127671e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 19:15:33 2017 -0600
Spirit: add some CSMA initialization logic
commit bcf55c71336d48947fe19bb09a799169852301c2
Merge: 89e9d426e9 2fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-25 15:14:35 -06:00
Gregory Nutt
2fc0fbcf7e
Squashed commit of the following:
...
commit 89e9d426e91c056e659fccf5e5c4392618f8f777
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:44:19 2017 -0600
Update some comments
commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:15:54 2017 -0600
Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers
commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a
Merge: 87b616414a 6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-24 16:46:30 -06:00
Anthony Merlino
c13bd23ed9
drivers/mrf24j40: Trivial whitespace fix
2017-07-16 23:51:24 -04:00
Anthony Merlino
8610723ee6
ieee802154: Adds some wlinfo logs for debugging
2017-07-16 23:51:24 -04:00
Anthony Merlino
acc1ecd9a9
drivers/mrf24j40: Fixes math error for calculating sleep count values
2017-07-16 23:51:24 -04:00
Anthony Merlino
bd821dafcb
drivers/mrf24j40: Fixes line endings in file
2017-07-13 03:23:19 -04:00
Anthony Merlino
350776eca3
drivers/mrf24j40: Fixes issues with sleeping for beacon enabled networking
2017-07-13 03:18:22 -04:00
Anthony Merlino
21bc4175fe
drivers/mrf24j40: Adds header guards to mrf24j40_reg.h
2017-07-12 14:37:17 -04:00
Anthony Merlino
b1eb796d97
drivers/mrf24j40: Hook in setdevmode from newly added radio attribute setting
2017-07-12 00:54:29 -04:00
Anthony Merlino
f944a33485
drivers/mrf24j40: Fixes implicit declaration warning
2017-07-11 23:47:09 -04:00
Anthony Merlino
c3f51dce70
drivers/mrf24j40: Formatting fixes
2017-07-11 23:46:39 -04:00
Gregory Nutt
4ad0f8b68b
trivial
2017-07-11 19:45:22 -06:00
Anthony Merlino
3148e62ca1
drivers/wireless/ieee802154/mrf24j40: Aligns better with coding standard after splitting up driver
2017-07-11 21:12:50 -04:00
Anthony Merlino
0eaf2925cf
drivers/wireless/ieee802154/mrf24j40/: Fixes bug causing radio to cease transmitting
2017-07-11 21:11:52 -04:00
Anthony Merlino
35289e6d0e
ieee802154: Minor reformatting
2017-07-11 20:36:50 -04:00
Anthony Merlino
bbf37a0db8
drivers/wireless/ieee802154/mrf24j40: Fixes issue with non-beacon enabled mode
2017-07-10 13:11:43 -04:00
Anthony Merlino
28d1db02b8
drivers/wireless/ieee802154/mrf24j40: Splits up driver into multiple files to make it easier to navigate
2017-07-10 13:11:43 -04:00
Anthony Merlino
deeb52cedc
drivers/wireless/ieee802154/mrf24j40: Minor timing fix. Matches recommended value in datasheet
2017-07-10 13:11:42 -04:00
Anthony Merlino
0aabea2662
drivers/wireless/ieee802154/mrf24j40: Fixes odd extra spacing that mysteriously got introduced
2017-07-10 13:11:42 -04:00
Anthony Merlino
b9a9ba7dd0
ieee802154: Adds configuration options for verbose logging of certain features, to aid in debugging
2017-07-10 13:06:12 -04:00
Gregory Nutt
053b6e3d9f
Fix dangling white space at the end of lines.
2017-07-03 10:08:49 -06:00
Anthony Merlino
d05cf268da
drivers/wireless/ieee802154: Moved radios to individual sub-directories
2017-07-03 00:33:17 -04:00
Anthony Merlino
7d9c4ace34
ieee802154: Cleans up some wireless logging
2017-07-01 17:05:42 -04:00
Anthony Merlino
5ca18999a5
ieee802154: Random fixes to get beacon-enabled networking more stable
2017-07-01 17:05:42 -04:00
Anthony Merlino
b981ced4d4
ieee802154: Finishes beacon association functionality
2017-07-01 17:05:42 -04:00
Anthony Merlino
6b17d5ccc9
ieee802154: Minor changes to align closer with coding standard
2017-07-01 17:05:42 -04:00
Gregory Nutt
95e20afcd2
drivers/: Remove dangling space at the end of lines.
2017-06-28 13:17:17 -06:00
Anthony Merlino
da8afe9d9e
ieee802154: Finishes transmission of beacon frames, and performing a passive scan
2017-06-25 18:08:00 -04:00
Anthony Merlino
683bd6e10e
ieee802154: Adds some missing elements to start support for beacon-enabled networks
2017-06-25 18:08:00 -04:00
Gregory Nutt
05590a2228
6LoWPAN: Correct a few addressing issues. The apps/examples/udp test now appears to be fully functional. Also reserve two bytes at the end of the frame for the FCS.
2017-06-21 13:43:53 -06:00
Gregory Nutt
2397bc728b
Add some comments to a Kconfig file; Fix a typo introduced in previous commit.
2017-06-21 10:40:36 -06:00
Gregory Nutt
8db9461e0e
mrf24j40: Fix a warning (which is actually an error)
2017-06-21 10:28:52 -06:00
Anthony Merlino
b1ce07deb1
Swithches IEEE 802.15.4 based code to using byte arrays instead of uint16_t values for short address and PAN ID
2017-06-19 05:55:28 -04:00
Gregory Nutt
afa0ab0819
Remove dangling whitespace form the end of lines
2017-06-17 14:13:25 -06:00
Gregory Nutt
77757410c8
Remove dangling white space at the end of lines.
2017-06-15 10:46:48 -06:00
Gregory Nutt
4a88d6a50a
Merge branch 'ieee802154' of bitbucket.org:nuttx/nuttx into ieee802154
2017-06-15 10:32:55 -06:00
Anthony Merlino
e30501ebd4
wireless/ieee802154: Lots of fixes, cleanup, new functionality. Functional
2017-06-15 12:11:52 -04:00
Anthony Merlino
908d438047
WIP: wireless/ieee802154: More work on association/beacon-enabled networks
2017-06-14 02:49:32 -04:00
Gregory Nutt
679a08e371
Merge remote-tracking branch 'spiriou/wapi_scan'
2017-05-21 09:25:02 -06:00
Simon Piriou
a332c4b9ce
bcmf: fix issue in AP scan event processing
2017-05-21 16:04:24 +02:00
Simon Piriou
6b15c26e56
bcmf: add SIOCGIWSCAN ioctl support
2017-05-20 22:13:15 +02:00
Anthony Merlino
06634afbe0
wireless/ieee802154: Restructuring of MAC notifications. Simplifes some interfaces
2017-05-15 21:44:57 -04:00
Gregory Nutt
fa649df52e
Photon: Small update from Simon Piriou.
2017-05-14 08:39:53 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Anthony Merlino
806dcd9a47
wireless/ieee802154: Brings closer to Nuttx coding style
2017-05-09 17:20:57 -04:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Anthony Merlino
3fa8e32e36
wireless/ieee802154: MRF24J40: Finishes receive functionality, supports promicuous mode, and rxonidle attributes
2017-05-08 16:23:13 -04:00
Anthony Merlino
1490599b69
wireless/ieee802154: Reworks data_ind allocation to include IOB allocation/deallocation. Hides private data.
2017-05-06 10:20:19 -04:00
Anthony Merlino
dd40014279
wireless/ieee802154: Removes radio IOCTL. Starts bringing radio and MAC closer with well-defined interface.
2017-05-05 11:15:38 -04:00
Anthony Merlino
2c57c3f83b
wireless/ieee802154: Changes rxenable at radio layer
2017-05-05 11:15:38 -04:00
Gregory Nutt
6a45afdd75
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-04 07:11:19 -06:00
Gregory Nutt
88be413a05
Remove dangling whitespace at the end of lines.
2017-05-03 18:30:40 -06:00
Gregory Nutt
97f149a40b
Photon: Cosmetic changes to style detected by tools/nxstyle
2017-05-03 18:20:57 -06:00
Simon Piriou
b5e1ea4bef
bcmf: fix frame not freed when dropped + cleanup
2017-05-03 23:19:28 +02:00
Gregory Nutt
2ece0c57dd
Remove dangling whitespace at the end of lines
2017-05-02 14:42:40 -06:00
Simon Piriou
bd5d6ce986
bcmf: implement basic wext interface for authentication
2017-05-02 08:48:13 -06:00
Anthony Merlino
f02d98d15e
wireless/ieee802154: Changes transmit data path to use IOBs and exposes function for getting size of MAC header
2017-05-02 09:58:54 -04:00
Anthony Merlino
c4007a111c
wireless/ieee802154: Fixes semaphore logic and list logic
2017-05-01 09:27:44 -04:00
Simon Piriou
fe77735960
bcmf: add netdev support for Broadcom FullMAC driver
2017-04-30 20:36:35 +02:00
Gregory Nutt
a7901f5c4c
Merge remote-tracking branch 'origin/master' into photon
2017-04-29 12:35:01 -06:00
Gregory Nutt
c7264eb550
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:28:19 -06:00
Gregory Nutt
f826877c61
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-29 12:27:49 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Simon Piriou
0d1a79719a
bcmf: add escan ioctls support + cleanup
2017-04-28 19:44:48 +02:00
Gregory Nutt
f1aa43512a
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-27 17:00:11 -06:00
Gregory Nutt
2e6908b384
IOCTLS. Separate wireless character driver IOCTL commands from wireless network driver IOCTL commands. Move from wireless.h to ioctl.h.
2017-04-27 16:58:30 -06:00
Gregory Nutt
a134178034
Enabled wireless IOCTL commands in photon/wlan configuration
2017-04-26 12:30:18 -06:00
Anthony Merlino
9e760dcf6a
wireless/ieee802154: Lots of little fixes and changes to get everything to build
2017-04-26 11:36:06 -04:00
Simon Piriou
6bb2db8c15
bcmf: enable DMA for SDIO transfers
2017-04-26 17:23:53 +02:00
Gregory Nutt
ace460ad0e
configs/photon/src/stm32_wlan.c: Remove unused, inappropriate network driver registration.
2017-04-25 13:02:50 -06:00
Gregory Nutt
62fc578661
wireless/ieee80211: Add BSD license information to all files (except the Broadcom files -- need to revisit those).
2017-04-24 15:11:22 -06:00
Simon Piriou
a23ac02959
bcmf: register network driver + update defconfig file
2017-04-24 20:04:47 +02:00
Simon Piriou
d72f36948e
bcmf: fix Kconfig file
2017-04-24 20:02:20 +02:00
Gregory Nutt
a57c79e8b3
wireless/ieee80211: Add broadcom network device registration logic.
2017-04-24 10:43:57 -06:00
Gregory Nutt
e507a3f295
wiress/ieee80211: Broadcom network driver needs to register as an ieee802.11 driver, not an Ethernet driver.
2017-04-24 10:28:06 -06:00
Gregory Nutt
50fb7b0ba0
wireless/ieee80211: Add skeleton for a broadcom network driver.
2017-04-24 10:23:31 -06:00
Gregory Nutt
0ac6fbb3c7
drivers/ieee80211/: Change all occurrences of _info, _warn, and _err to wlinfo, wlwarn, and wlerr.
2017-04-23 16:24:47 -06:00
Simon Piriou
c0862c862f
photon: cleanup and refactor bcmf driver
2017-04-23 23:39:17 +02:00
Simon Piriou
a76266106a
photon: fix compilation errors and update wlan defconfig
2017-04-23 10:00:19 -06:00
Gregory Nutt
d8e4cbcfd5
Merge remote-tracking branch 'spiriou/wlan_dev' into photon
2017-04-22 08:26:40 -06:00
Simon Piriou
22e5cec376
photon: add basic wlan scan function
2017-04-22 15:57:51 +02:00
Gregory Nutt
309f0abc14
Merge remote-tracking branch 'origin/master' into ieee802154
2017-04-21 16:34:10 -06:00
Gregory Nutt
d5207efb5a
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
Anthony Merlino
b1c8f008d6
wireless/ieee802154: Simplifies TX completion interface. Documents and cleans up some functions
2017-04-21 14:57:27 -04:00
Anthony Merlino
795e70a952
wireless/ieee802154: Work on packet reception at radio layer (MRF24J40)
2017-04-21 13:06:26 -04:00
Anthony Merlino
a5d73e42cd
wireless/ieee802154: Fixes radio callback arguments
2017-04-19 18:15:09 -04:00
Gregory Nutt
9a1fe0b971
ieee802154: Cosmetic changes from review of last PR.
2017-04-19 14:52:45 -06:00
Anthony Merlino
1abe4ae4da
wireless/ieee802154: Starts structuring transmission completion handling
2017-04-19 16:35:02 -04:00
Anthony Merlino
37e7c67373
wireless/ieee802154: Changes radio interface to match MAC callback design
2017-04-19 13:26:44 -04:00
Gregory Nutt
35756d6295
ieee802.15.4: Cosmetic changes from review of last PR.
2017-04-18 14:25:23 -06:00
Anthony Merlino
9ad3b375e5
wireless/ieee802154: Lots of small fixes to eliminate build issues.
...
Generally cleans things up and fixes lots of small issues preventing a successful build. Does not completely build, but there are significantly less errors
2017-04-18 15:34:28 -04:00
Gregory Nutt
6d3ec6e4a4
ieee802.15.4: Changes from review of last PR
2017-04-17 09:53:58 -06:00
Anthony Merlino
46d7a4bb03
wireless/ieee802154: Continues development on transmit structure
2017-04-17 11:34:41 -04:00
Simon Piriou
0434528732
photon: request firmware version and MAC address
2017-04-16 13:13:11 +02:00
Simon Piriou
d646bde1f8
photon: add sdpcm tx basic support
2017-04-16 11:28:08 +02:00
Anthony Merlino
d9e2139e46
wireless/ieee802154/mrf24j40: Renaming, added bind method
2017-04-15 13:20:33 -04:00
Simon Piriou
11d3db5c35
photon: add sdpcm + thread support for wlan
2017-04-15 11:39:13 +02:00
Gregory Nutt
6b8a8bda35
ieee802.15.4 radio: Remove interface methods that duplicate IOCTL commands.
2017-04-13 11:14:02 -06:00
Gregory Nutt
8288f53d4e
ieee802154 radio: Implement IOCTL decode and dispatch in all radio drivers.
2017-04-13 09:13:16 -06:00
Simon Piriou
e5c4a28c3a
photon: wlan support
2017-04-05 21:55:21 +02:00
Anthony Merlino
8f67ec30a7
wireless/ieee802154: Removes ieee802154.h and makes other minor changes
2017-03-29 12:39:52 -04:00
Gregory Nutt
3fbf59e2bc
MRF24J40: Take advantage of new OS features for interrupt parameter passing.
2017-03-27 10:48:58 -06:00
Gregory Nutt
b315f0d851
AT86RF23x: Clean-up, standardize lower half interface. Take advantage of new OS features for interrupt parameter passing.
2017-03-27 10:28:03 -06:00
Gregory Nutt
e97a13ea90
MRF24J40/Clicker2: Add an MRF24J40 device configuration to the Clicker2 STM32 board. Fix a few errors discovered during build.
2017-03-24 13:49:40 -06:00
Anthony Merlino
7388816629
drivers/ieee802154: Moves defines to MAC layer and adjusts some addressing functionality
2017-03-24 11:10:35 -04:00
Simon Piriou
1f71c8ced8
bcm: update driver
2017-03-20 22:40:25 +01:00
Gregory Nutt
25e4e3c314
Bring closer to NuttX coding standard.
2017-03-15 14:57:13 -06:00
Gregory Nutt
f985b52587
Integrate use of new wireless debug macros. Replace ad hoc debug macros. Convert obsolete dbg() macros to current info(), warn(), err() macros.
2017-03-15 14:37:17 -06:00
Gregory Nutt
15b2046748
Merge remote-tracking branch 'origin/master' into ieee802154
2017-03-15 14:32:05 -06:00
Gregory Nutt
57a1360c84
Add option to enable wireless debug output.
2017-03-15 14:31:01 -06:00
Gregory Nutt
fc6405d519
Bring closer to NuttX coding standard.
2017-03-15 14:16:19 -06:00
Simon Piriou
bf9391a1fe
photon: porting wlan device
2017-03-14 21:13:36 +01:00
Sebastien Lorquet
b5824d0993
Merge branch 'master' into ieee
2017-03-13 16:51:05 +01:00
Simon Piriou
e10ce5ce51
Photon: add basic support for wlan chip
2017-03-12 16:57:59 +01:00
Gregory Nutt
399f306744
A few cosmetic changes
2017-03-11 08:58:42 -06:00
Gregory Nutt
04b2964eac
drivers/wireless/nrf24l01.c: Review last PR. Also got enthused and did major re-work to file to bring it closer to the NuttX coding style. Fixed a few compile time warnings.
2017-03-10 17:29:58 -06:00
Leif Jakob
5534e0c493
multiple fixes in nrf24l01 driver
...
- signal POLLIN if there is already data in the FIFO
- send ETIMEDOUT to userspace after 2 seconds if TX IRQ was not received
- handle FIFO overflow
- handle invalid pipes/empty FIFO
- multiple cosmetics (missing static, duplicate define, missing \n)
2017-03-10 23:21:49 +01:00
Sebastien Lorquet
7e19f4014e
Merge branch 'master' into ieee
...
Conflicts (fixed):
drivers/wireless/ieee802154/mrf24j40.c
include/nuttx/fs/ioctl.h
2017-03-09 14:28:52 +01:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
ac6e552ff7
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:37:44 -06:00
Gregory Nutt
ded155c638
Fixes for coding standard: '*' needs to 'snuggle' with following variable name
2017-02-28 18:22:58 -06:00
Gregory Nutt
69c26cca50
Correct mimatched function prototype.
2017-02-27 12:24:34 -06:00
Gregory Nutt
7bd8da19b9
Missed some changes in the last commit.
2017-02-27 12:11:35 -06:00
Gregory Nutt
840c5935a3
Correct a typo from one of the preceding commits.
2017-02-27 11:58:20 -06:00
Gregory Nutt
a773f9412a
STMPE811 driver needs argument in interrupt handler
2017-02-27 11:41:48 -06:00
Gregory Nutt
4cd31be19d
Convert some serial drivers to use use irq_attach.
2017-02-27 08:55:21 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
08c001196b
drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered.
2017-01-15 13:00:50 -06:00
Gregory Nutt
4fcbe8e410
drivers: Disable priority inheritance on all semaphores used for signaling
2016-11-03 11:00:47 -06:00
Sebastien Lorquet
3654b841bc
Move contactless drivers to their own directory
2016-08-31 13:08:58 +02:00
Gregory Nutt
caea59b340
SPI bit order: Add configuration setting to indicate if an architecture-specif SPI implementation does or does not support LSB bit order.
2016-08-08 12:21:20 -06:00
Gregory Nutt
6df28bc74e
Make bit-order SPI H/W feature configurable for better error detection
2016-08-08 11:54:13 -06:00
Gregory Nutt
21859af6d9
Add check of return value in drivers affected by last change: Report the error on a failure to set the bit order.
2016-08-08 08:40:37 -06:00
Gregory Nutt
7d4cb73bd6
STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers.
...
This change three things: (1) It adds HWFEAT_LSBFIRST as a new H/W feature. (2) It changes the implementations of SPI_SETBITS in the STM32 and EFM32 derivers so that negated bit numbers are simply errors and it adds the SPI_HWFEATURES method that can set the LSB bit order, and (3) It changes all calls with negative number of bits from all drivers: The number of bits is now always positive and SPI_HWFEATUREs is called with HWFEAT_LSBFIRST to set the bit order.
2016-08-08 08:28:13 -06:00
Gregory Nutt
9965cbe428
drivers/: Review and correct some stylistic inconsistencies
2016-08-07 09:43:48 -06:00
Alan Carvalho de Assis
10a7698112
drivers/wireless/mfrc522.c: Fix memory free command
2016-08-07 07:34:01 -06:00
Alan Carvalho de Assis
bfac90f720
Add MFRC522 RFID ISO14443 and Mifare transceiver driver
2016-08-06 08:45:52 -06:00
Gregory Nutt
1660329d06
Rename up_rnginitialize to devrandom_register
2016-07-18 10:55:37 -06:00
Gregory Nutt
2a751068e6
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
2b445ddccc
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
2016-06-20 08:57:08 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
7d0950bb22
net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors.
2016-06-12 07:09:37 -06:00
Gregory Nutt
e18e2b351b
Need a info() macro mapping
2016-06-11 19:05:32 -06:00
Gregory Nutt
f12da847d8
drivers/wireless: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-11 19:03:57 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Sebastien Lorquet
0ef10e6d0e
fix atmel driver for new 802154 radio api
2016-06-01 13:11:49 +02:00
Sebastien Lorquet
b0afc4807d
synthetic commit to import ieee branch from old repo
2016-06-01 12:12:21 +02:00
Gregory Nutt
1f8212679c
NRF24L01: Fix backward calculation of relative frequency. Noted by Henry Zhang
2016-04-15 07:07:22 -06:00
Paul A. Patience
c62bb9beb1
Fix issues detected by cppcheck
2016-03-22 15:46:47 -04:00
Gregory Nutt
1c31e10397
NRF2410L: Add missing conditional logic in vtable initialization
2016-03-08 16:11:08 -06:00
Gregory Nutt
0970d43ab8
Cosmetic changes to comments
2016-02-28 07:48:16 -06:00
Gregory Nutt
d777110cbe
Eliminate a warning
2016-02-27 07:27:45 -06:00
Sebastien Lorquet
dc7adfa817
drivers/wireless/ieee802154/Kconfig
...
drivers/wireless/ieee802154/Make.defs
Changes to the build infrastructure to include the mrf24j40 driver
include/nuttx/spi/spi.h
Define a IEEE SPI device
include/nuttx/wireless/ieee802154/ieee802154_radio.h
This file defines the API of a IEEE 802.15.4 radio device, to be used by the future common MAC 802.15.4 layer
drivers/wireless/ieee802154/mrf24j40.c
drivers/wireless/ieee802154/mrf24j40.h
The main MRF24J40 IEEE 802.15.4 radio driver
include/nuttx/wireless/ieee802154/mrf24j40.h
This file allows instanciation of the MRF24j40 driver from board configurations
2016-02-26 18:39:27 -06:00
Gregory Nutt
1ecb092e51
Add wireless/ieee802154 to the build
2016-02-26 17:27:58 -06:00
Gregory Nutt
cfe018e991
Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS
2016-02-26 16:50:26 -06:00
Gregory Nutt
309beae2cd
Move drivers/ieee802154 to drivers/wireless/ieee802154; rename include/nuttx/net ieee802154 to 6lowpan.h
2016-02-26 15:03:16 -06:00
Gregory Nutt
0fb035f76b
Standardize some naming in code section comments
2016-02-21 18:09:04 -06:00
Gregory Nutt
2244ed46bc
nuttx/drivers: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
2016-02-14 07:32:58 -06:00
Gregory Nutt
bf8120d51d
Fix some odd logic in CC3000 semaphore handling. Noted by Vladimir Komendantskiy
2016-02-10 09:50:28 -06:00
Gregory Nutt
564a1ce606
Cosmetic clean-up of comments
2016-01-24 08:21:55 -06:00
Gregory Nutt
7edf921c5e
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8
All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features
2016-01-23 16:18:13 -06:00
Gregory Nutt
63301fe213
Cosmetic changes from review of last pull request
2016-01-17 14:52:11 -06:00
Janne Rosberg
fb1bf10a3d
add pn532 support
...
Signed-off-by: Janne Rosberg <janne.rosberg@offcode.fi>
2016-01-17 22:17:49 +02:00
Gregory Nutt
c955cdccd9
Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h
2015-11-16 13:31:02 -06:00
Gregory Nutt
cdc646ae68
Another typo introduced in previous commit
2015-10-10 12:31:31 -06:00
Gregory Nutt
5f9c47a83f
drivers/wireless: Fixes to spacing and alignement
2015-10-10 11:51:32 -06:00
Gregory Nutt
863ded3584
Standardize the width of all comment boxes in C header files
2015-10-03 07:45:15 -06:00
Gregory Nutt
16b32bbadd
Standardize the width of all comment boxes in C files
2015-10-03 07:25:53 -06:00
Gregory Nutt
0f90500f72
Standardize the width of all comment boxes in header files
2015-10-02 17:48:24 -06:00
Gregory Nutt
5b51a9fcdd
Standardize the width of all comment boxes in C files
2015-10-02 17:43:18 -06:00
Pierre-noel Bouteville
8651e0f2ca
CC3300: Add const to pointers in arguments to wlan_connect; remove an unused function prototype
2015-09-09 16:34:37 -06:00
Gregory Nutt
afdb3c751a
Fix typos from a previous commit
2015-09-08 12:45:30 -06:00
Gregory Nutt
a7e43c7fdb
Eliminate some warnings
2015-09-08 09:20:18 -06:00
Gregory Nutt
48d7930631
CC3300: Eliminate some compile time warnings
2015-09-08 07:37:19 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
0476d8168a
More missing semicolons after DEBUGASSERT
2015-05-27 13:32:39 -06:00
Gregory Nutt
e4d2822af8
Make some file section headers more consistent with standard
2015-04-08 07:15:32 -06:00
Gregory Nutt
e2e7c791c1
Refreshed Spark Configurations
2015-02-28 15:44:58 -06:00
Gregory Nutt
d6704a1cd7
Suffer the consequences of moving struct timeval to its correct location
2015-02-15 15:18:35 -06:00
Gregory Nutt
f24520acbb
Backout use of named initializers. Not C99
2015-01-31 12:29:21 -06:00
Gregory Nutt
64ce7563f2
CC3000: Fix yet another typo in last two commitsgit diff I should not be doing this when I have the flugit diff
2014-12-18 16:27:46 -06:00
Gregory Nutt
49a22f1ccb
CC3000: Oops. Fix an error in the last commit
2014-12-18 07:39:55 -06:00
Gregory Nutt
2fe506d70c
CC3000 Fix: Data can be unaligned. When dereferences as an input ntosh(), a bad value is returned. Reported by Alan Carvalho de Assis
2014-12-18 07:18:00 -06:00
Gregory Nutt
e42f7b552f
This commit is a set of patches 02/11 through 03/11 correcting issues with the CC3000 networking (01/11 was committed separated). Among these 10 patches:
...
03/11: CC3000 driver was getting stuck at recv() when remote host closed connection and application tried to read data from remotely shutdown socket. This patch adds proper handling for remotely closed socket event.
07/11: Socket state initialization was done in 'register', while it should be initialized in 'open' and deinitialized in 'close'. Old way caused problems when device is closed, power-cycled and then reopened as old socket state was left enabled.
08/11: Select thread was getting stuck after 'close, power-cycle, reopen', since selectsem was not properly setup and cleaned up.
09/11 'maxFD' was not properly reset in select worker and not checked for before calling cc3000_select().
10/11: After wlan_stop()/cc3000_close(), irqsem was left with count '-1'. Therefore on next wlan_start()/cc3000_open(), initial value for irqsem was wrong. Additional repeated wlan_start()/wlan_stop() decreased irqsem value further. Obviously this causes driver not to function correctly and freeze.
Patch moves initialization and destruction of waitsem, irqsem and readysem to cc3000_open/cc3000_close.
All are: Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
2014-11-28 08:52:52 -06:00
Gregory Nutt
5f0343bed9
Use usleep instead of usdelay as CONFIG_BOARD_LOOPSPERMSEC might not be calibrated correctly and CC3000 is fine with longer wait.
...
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
2014-11-28 08:16:30 -06:00
Gregory Nutt
9ac09db800
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:46:14 -06:00
Gregory Nutt
d7d759f7a7
Update everything under nuttx/drivers to use the corrected syslog interfaces
2014-10-08 10:18:58 -06:00
Gregory Nutt
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
Gregory Nutt
9cd1ddada4
Rename kmemalign to kmm_memalign and krealloc to kmm_realooc for consistency with other naming
2014-08-31 15:27:37 -06:00
Gregory Nutt
2a509d560f
CC3000: Fix build when POLL is enabled. From Jussi Kivilinna.
2014-05-21 07:37:46 -06:00
Gregory Nutt
b584ecb967
CC3000: Fix a race condition in start-up of unsoliced_thread. From Jussi Kivilinna
2014-05-21 07:32:32 -06:00
Gregory Nutt
b2d26436de
Configuration has CC3000_SPI_MODE settings but source uses CONFIG_CC3000_SPIMODE. From Jussi Kivilinna
2014-05-21 07:20:09 -06:00
Gregory Nutt
a9d89b5442
Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi Kivilinna
2014-05-21 07:17:46 -06:00
Gregory Nutt
972c4cbab5
Nucleo F401RE: Remove PX4 cruft that can in with the port
2014-04-22 12:18:08 -06:00
Gregory Nutt
3a1324741a
More trailing whilespace removal
2014-04-13 14:32:20 -06:00
Gregory Nutt
056aed1274
Make sure that there is one space between while and condition
2014-04-12 13:09:48 -06:00
Gregory Nutt
6092b5813a
Numerous updates to the CC3000 driver from David Sidrane
2014-02-18 14:16:51 -06:00
Gregory Nutt
91b002a043
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
2014-02-10 18:08:49 -06:00
Gregory Nutt
0d0c3e66fb
Updates to sparck configuration from David Sidrane
2013-11-01 11:40:19 -06:00
Gregory Nutt
890417a0f4
Missing files from last CC3000 driver update from David Sidrane
2013-10-31 09:00:05 -06:00
Gregory Nutt
85e90b0064
Updated CC3000 driver from David Sidrane
2013-10-30 14:37:13 -06:00
