Mux USB IO pins one-by-one using package specific pinmux definitions. This avoids accidentally overwriting IO settings for other pins.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
include theis commit:
commit 6ad8917b7e27e5e80fb9268492b9111b17ed2024
Author: Petro Karashchenko <petro.karashchenko@gmail.com>
Date: Fri Jan 28 09:13:23 2022 +0200
lib: fix compilation when strings.h is included
In a systems that provide strings.h and it is included
together with sbi_bitops.h the compilation error appears.
The ffs() and fls() are provided by strings.h
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
and fix this warning:
Error: include/sbi/sbi_bitops.h:47:19: declaration of 'ffs' shadows a built-in function
static inline int ffs(int x)
^~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
After check the official specification of ARM ISA
and Thumb ISA, the arch_setjmp_thumb.S are written
by arm unified assembly language,
so it easy to make it works for ARM and thumb ISA.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
PR#5688 review fixes are in this patch. The PR was already
merged so the fixes are addresses here as a separate patch.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Support for RTC Watchdog Timer is currently in place, but not yet
functional due to not yet implemented RTC driver.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
This adds a simple USB device driver for the mpfs. However,
this driver is still at its early phase. Only limited testing
with CDC/ACM has been conducted.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
frame. The user frame is passed them to xtensa_user that actually uses
EXCVADDR.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
by fixing filter initialization.
STM32F7 CAN3 works in single peripheral configuration and there is only 14 filter banks: 0-13. Previously not available 14 indexed filter (CAN_NFILTERS/2) was wrongly used for for receiving to FIFO. Now zero indexed filter is correctly used instead.
Error: module/mod_insmod.c:203:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
203 | strncpy(modp->modname, modname, MODLIB_NAMEMAX);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wqueue/kwork_thread.c: In function 'work_start_lowpri':
Error: wqueue/kwork_thread.c:212:22: error: '%lx' directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Werror=format-truncation=]
212 | snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
local/local_sockif.c: In function 'local_getsockname':
Error: local/local_sockif.c:392:11: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
392 | strncpy(unaddr->sun_path, conn->lc_path, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chip/esp32_wifi_utils.c: In function 'esp_wifi_scan_event_parse':
Error: chip/esp32_wifi_utils.c:373:37: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset(ap_list_buffer, 0x0, sizeof(ap_list_buffer));
^
stdio/lib_fputs.c: In function 'fputs':
Error: stdio/lib_fputs.c:99:9: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
Error: stdio/lib_fputs.c:99:27: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
stdio/lib_vfprintf.c: In function 'vfprintf':
Error: stdio/lib_vfprintf.c:40:6: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (stream)
^
string/lib_strdup.c: In function 'strdup':
Error: string/lib_strdup.c:39:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strndup.c: In function 'strndup':
Error: string/lib_strndup.c:56:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strpbrk.c: In function 'strpbrk':
Error: string/lib_strpbrk.c:39:7: error: nonnull argument 'str' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~
Error: string/lib_strpbrk.c:39:15: error: nonnull argument 'charset' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~~~~~
string/lib_strrchr.c: In function 'strrchr':
Error: string/lib_strrchr.c:40:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
Error: time/lib_asctimer.c:73:50: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 12 [-Werror=format-truncation=]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~
time/lib_asctimer.c:73:21: note: directive argument in the range [-2147481748, 2147483647]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
time/lib_asctimer.c:73:3: note: 'snprintf' output between 17 and 68 bytes into a destination of size 26
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g_wday_name[tp->tm_wday], g_mon_name[tp->tm_mon],
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tp->tm_mday, tp->tm_hour, tp->tm_min, tp->tm_sec,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1900 + tp->tm_year);
~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
In xtensa/include/irq.h the XCPTCONTEXT_SIZE is
`#define XCPTCONTEXT_SIZE ((4 * XCPTCONTEXT_REGS) + 0x20)`
XCPTCONTEXT_SIZE is already byte size of xcpcontext
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
Summary:
- I noticed that when exiting getprime, DEBUGASSERT happens in
nxsem_wait()
- Finally, I found that up_putc() uses nxsem_wait()
- This commit fixes this issue by removing the semaphore.
- Also, up_putc() now calls imx_lowputc()
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
arm: Avoid call k[u]mm_memalign to save the code size
ceva: Correct stack_base_ptr usage(top of stack v.s. bottom of stack)
mips: Correct the stack alignment in up_use_stack
misoc: Correct the stack alignment in up_use_stack
or1k: Correct the stack alignment in up_use_stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit fixes an issue where some peripheral clocks are being
disabled during CPU reset on ESP32-C3.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Reason for use sw-interrupt as syscall interrupt:
The xtensa `syscall` instruction can cause SYSCALL interrupt.
But SYSCALL interrupt is same interrupt level with level-one
interrupt.
Nuttx swint can enter `enter_critical_section` and gerenate
interrupt.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
For up_irq_disable, use XCHAL_EXCM_LEVEL
For up_irq_save, use XCHAL_IRQ_LEVEL.
Then we can use svcall in enter_crritical_section.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
They are not really defined and used in any where:
uint32_t up_getmisa(void);
uint32_t up_getarchid(void);
uint32_t up_getimpid(void);
uint32_t up_getvendorid(void);
uint32_t up_gethartid(void);
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary:
- This commit adds thumb support to i.MX6
- Also, applies the same coding style to arch_elf.c
Impact:
- i.MX6 only
Testing:
- Tested with sabre-6quad:smp (QEMU, Dev board)
- Tested with sabre-6quad:netnsh (QEMU)
- Tested with sabre-6quad:netknsh (QEMU, not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Support for RTC Watchdog Timer is currently in place, but not yet
functional due to not yet implemented RTC driver.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
arch/arm/src/efm32/efm32_start.c:
/* For the case of the separate user-/kernel-space build, perform whatever
* platform specific initialization of the user memory is required.
* Normally this just means initializing the user space .data and .bss
* segments.
*/
#ifdef CONFIG_NUTTX_KERNEL
efm32_userspace();
showprogress('E');
#endif
But there is no CONFIG_NUTTX_KERNEL configuration setting. Comparing this to other architectures it is clear this should be
#ifdef CONFIG_BUILD_PROTECTED
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reason: xtensa svcall only have level-1 interrupt level.
Sush do not generate interrupt when up_irq_save.
Software int can generate interrupt when up_irq_save.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
`up_irqinitialize`. `esp32_cpuint_initialize` is not a good place as
it's also called from CPU1.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This commit fixes at least two issues.
* Fix a build with clang on linux
```
/usr/bin/ld: cannot open linker script file nuttx.ld: No such file or directory
clang: error: linker command failed with exit code 1 (use -v to see invocation)
```
* Restore symbol renaming for clang on linux
I guess it actually depends on the linker.
For now, use CONFIG_HOST_MACOS.
This fixed the following crash seen with sim/linux built with clang.
```
#135462 0x0000000000404a81 in nxtask_exithook (tcb=0x48f310 <g_idletcb>, status=1, nonblocking=0 '\000') at task/task_exithook.c:618
#135463 0x0000000000402aed in exit (status=1) at task/exit.c:103
#135464 0x0000000000475833 in host_abort (status=1) at sim/up_hostmisc.c:48
#135465 0x000000000040e6c6 in up_assert (filename=0x47b167 "semaphore/sem_wait.c", lineno=113) at sim/up_assert.c:126
#135466 0x000000000040850b in _assert (filename=0x47b167 "semaphore/sem_wait.c", linenum=113) at assert/lib_assert.c:36
#135467 0x0000000000403a40 in nxsem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:113
#135468 0x0000000000403b43 in sem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:271
#135469 0x000000000040aad3 in lib_stream_semtake (list=0x7fca38b1c2d0) at stdio/lib_libstream.c:159
#135470 0x000000000040a8e7 in lib_flushall (list=0x7fca38b1c2d0) at stdio/lib_libflushall.c:61
#135471 0x0000000000404c3c in nxtask_flushstreams (tcb=0x48f310 <g_idletcb>) at task/task_exithook.c:520
#135472 0x0000000000404a81 in nxtask_exithook (tcb=0x48f310 <g_idletcb>, status=1, nonblocking=0 '\000') at task/task_exithook.c:618
#135473 0x0000000000402aed in exit (status=1) at task/exit.c:103
#135474 0x0000000000475833 in host_abort (status=1) at sim/up_hostmisc.c:48
#135475 0x000000000040e6c6 in up_assert (filename=0x47b167 "semaphore/sem_wait.c", lineno=113) at sim/up_assert.c:126
#135476 0x000000000040850b in _assert (filename=0x47b167 "semaphore/sem_wait.c", linenum=113) at assert/lib_assert.c:36
#135477 0x0000000000403a40 in nxsem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:113
#135478 0x0000000000403b43 in sem_wait (sem=0x7fca38b1c2d0) at semaphore/sem_wait.c:271
#135479 0x000000000040aad3 in lib_stream_semtake (list=0x7fca38b1c2d0) at stdio/lib_libstream.c:159
#135480 0x000000000040a8e7 in lib_flushall (list=0x7fca38b1c2d0) at stdio/lib_libflushall.c:61
#135481 0x0000000000404c3c in nxtask_flushstreams (tcb=0x48f310 <g_idletcb>) at task/task_exithook.c:520
```
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
Summary:
- I noticed that pthread always crashes when started
if CONFIG_BUILD_KERNEL=y
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with sabre-6quad:netknsh (not merged yet)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
State of problem:
- Some drivers that do not support write operations (does not
have write handler or ioctl do not perform any write actions)
are registered with write permissions
- Some drivers that do not support read operation (does not
have read handler or ioctl do not perform any read actions)
are registered with read permissions
- Some drivers are registered with execute permissions
Solution:
- Iterate code where register_driver() is used and change 'mode'
parameter to reflect the actual read/write operations executed
by a driver
- Remove execute permissions from 'mode' parameter
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Fix the CPU1 idle tasks stack corruption since the cpux's idle stack
is loaded from g_cpu_basestack (data section) before, but on this time
it maybe not ready since it is initialized by CPU0, and the value
from g_cpu_basestack is random.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
commit 328374f4658d11655f268f968f4c6c7a3942f320
changed the wait to use usleep. This killed the
write performace from the published values in the
datasheet of ~100 us to 2 mS per 256 bits. On
a 1000 per tick config. It can be 10 X worse
on the default 100 per tick config.
This changes uses up_udelay.
Architecture support for STMicroelectronics STMU585xx MCUs. This is
based on corresponding code for STM32L5, but has been considerably
adjusted. Tested with a B-U585I-IOT02A board and a simple NSH
configuration, but only running NuttX in the non-secure world with
TrustedFirmware-M.
Signed-off-by: Michael Jung <mijung@gmx.net>
This commit adds initial support for PWM driver to SAM MCU series.
Only general PWM on PWMH output is currently supported, complementary
output on PWML is not allowed. The current state of the driver also does
not support external triggering of other perihperals.
Multichannel option is supported. The functionality of the driver was
tested on an example pwm application and with a real time control system.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
