sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,796 Commits 1 Branch 0 Tags 291 MiB
5bcbadecaf
Commit Graph

3770 Commits

Author SHA1 Message Date
Gregory Nutt
0195049165 Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing). 2015-02-09 08:34:52 -06:00
Gregory Nutt
e218f620ac Correct a attribution in a comment 2015-02-09 07:27:43 -06:00
Gregory Nutt
8f4bbdd057 Updated Tiva ADC files 2015-02-06 16:56:12 -06:00
Gregory Nutt
2e054154e9 Forgot to add file in previous commit 2015-02-05 18:01:46 -06:00
Gregory Nutt
e87a1eee81 tmv4c123g-launchpad: Add Tiva ADC support to the TM4C123G-Launchpad. From Calvin Maguranis. 2015-02-05 17:58:17 -06:00
Gregory Nutt
46a4396b79 nuttx/configs/tm4c123g-launchpad/src/Makefile 2015-02-05 17:57:31 -06:00
Gregory Nutt
971c5c98fe Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis 2015-02-05 13:51:32 -06:00
Gregory Nutt
968e02a44c Update README files 2015-02-05 12:07:21 -06:00
Gregory Nutt
2d381d059c Update README 2015-02-05 11:23:55 -06:00
Gregory Nutt
cc63543b80 STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
ad719797ef Fix an error in IPv6 netmask caused by a bad range in the Kconfig file 2015-02-05 10:50:25 -06:00
Gregory Nutt
8b2536c699 Refresh configuration 2015-02-05 10:07:31 -06:00
Gregory Nutt
66f0198e3f Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete 2015-02-03 13:25:28 -06:00
Gregory Nutt
f019d11384 Restore 20Msec default 2015-02-02 14:59:49 -06:00
Gregory Nutt
fb72b1b1b7 Auto neighbor solicitation is no longer EXPERIMENTAL and is the default for the DK-TM4C129X/ipv6 configuration 2015-02-02 14:09:06 -06:00
Gregory Nutt
a07a764d42 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
011ff49685 Cosmetic update to a few comments 2015-02-01 12:23:57 -06:00
Gregory Nutt
58c05f365e Refresh some configurations 2015-02-01 12:15:46 -06:00
Gregory Nutt
6d7891c4de Fix compile issues with configs/sim/nettest 2015-02-01 12:00:30 -06:00
jeditekunum
d34b801b1d Obviously can't use LOWCONSOLE with nsh. 2015-02-01 09:21:51 -06:00
Gregory Nutt
2407008b6e drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
Gregory Nutt
f6ff626a2e Moteino Mego: Move linker scripts to scripts/ directory as with other configurations 2015-02-01 06:44:26 -06:00
Gregory Nutt
c8156e11de Moteino Mega: Rename files to conform to newer standards. Need to fix all of the old configurations someday 2015-01-31 14:15:13 -06:00
Gregory Nutt
de24a50eaa Review/modifications for change of last merge 2015-01-31 14:10:53 -06:00
Gregory Nutt
399bfcbf94 Merge commit '1207647ee19ac48746300f2d3fa8f4679c32de95' 2015-01-31 13:47:10 -06:00
jeditekunum
257dc3718a Update README for MoteinoMEGA (ATMEGA1284P) port. 2015-01-31 13:32:31 -06:00
jeditekunum
43c5a6f8f1 Complete initial port. 2015-01-31 11:59:39 -06:00
Gregory Nutt
0fc8d2fcc5 Unix domain: Add options to build in stream or datagram support separately 2015-01-31 07:58:51 -06:00
Gregory Nutt
a5b6ddbc64 apps/ustream and udgram: Change default FIFO path to /dev/fifo 2015-01-30 09:07:22 -06:00
Gregory Nutt
ebf1e121b5 Update configuration 2015-01-29 16:30:43 -06:00
Gregory Nutt
6ac0e90692 Update ChangeLog 2015-01-29 11:48:46 -06:00
Gregory Nutt
7a614072da update configuration 2015-01-29 09:33:24 -06:00
Gregory Nutt
72ac79e7a1 Minor fixes after initial tests with apps/examples/udgram 2015-01-28 15:27:54 -06:00
Gregory Nutt
35a814abca net/socket/accept.c: Ooops.. deleted one too many header files 2015-01-28 14:56:06 -06:00
Gregory Nutt
508f8aefa6 Unix domain socket support is no longer EXPERIMENTAL 2015-01-28 13:22:53 -06:00
Gregory Nutt
58287048e2 Refresh configurations 2015-01-28 12:47:03 -06:00
Gregory Nutt
b4a67285f1 sim/ustream: Add a configuration for testing Unix domain sockets with the simulator 2015-01-28 09:09:27 -06:00
jeditekunum
986c30833a Try console on serial 1. 2015-01-26 14:33:25 -06:00
Gregory Nutt
c16abdcd47 Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth 2015-01-26 07:33:22 -06:00
jeditekunum
b050703849 First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board. 2015-01-24 14:31:35 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
cc4c5bc927 Update README 2015-01-23 16:55:39 -06:00
Gregory Nutt
03e6270e73 configs/dk-tm4c129x/ipv6: Add an IPv6-enabled NSH configruation 2015-01-23 11:45:50 -06:00
Gregory Nutt
c77426e550 Cosmetic changes to comments; refresh configuration 2015-01-22 14:46:36 -06:00
Gregory Nutt
3ba0184051 Refresh configuration/update some misnamed conditional compilation 2015-01-18 11:17:00 -06:00
Gregory Nutt
274200b159 Missing # in #if in previous commit 2015-01-17 17:13:04 -06:00
Gregory Nutt
2fe20d9808 Spark: Certain combinations of conditional compilation results in compilation errors 2015-01-17 14:19:25 -06:00
Gregory Nutt
babe9cf08e Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future 2015-01-14 10:51:09 -06:00
Gregory Nutt
72a194ef39 Remove the px4-v2_upstream configuration. Moved to misc/Obsoleted/configs. 
This is not the official configuration for the PX4 board and has led to confusion by NuttX users.  The board configuration also requires some ongoing maintenance and customization to support ongoing PX4 testing and evaluation.  It is best retained the PX4 repositories where it can be properly maintained and not in the upstream NuttX repository.
 2015-01-14 09:54:51 -06:00
Gregory Nutt
a40979407f Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts. 
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer).  Also, do not unconditional enable the timer out interrupt.  The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
 2015-01-14 07:33:59 -06:00
Gregory Nutt
99dd9d9c19 Update README 2015-01-13 16:17:07 -06:00
Gregory Nutt
3efd127e64 Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress. 2015-01-13 11:49:00 -06:00
Gregory Nutt
9c3dce06e1 DK-TM3C129X Timer: Add timer initialization logic to the board bring-up 2015-01-13 11:10:35 -06:00
Gregory Nutt
dcb9f4cf31 TM4C123G LaunchPad: Button support from Bradlye Noyes 2015-01-12 21:14:01 -06:00
Gregory Nutt
64530008ba Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module 2015-01-09 14:10:31 -06:00
Gregory Nutt
1446092e95 Update README 2015-01-07 06:23:24 -06:00
Gregory Nutt
9dd82a5f08 DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration 2015-01-06 13:23:35 -06:00
Gregory Nutt
beaf4afdd4 DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup 2015-01-06 13:23:02 -06:00
Gregory Nutt
383a47fb28 DK-TM4C129X: Add support for on-board TMP100 temperature sensor 2015-01-06 11:50:56 -06:00
Gregory Nutt
207835bd0d Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt 2015-01-05 15:12:45 -06:00
Gregory Nutt
9f2803737d DK-TM4C129X: Enable I2C6 and the I2C tool in the default configuration 2015-01-05 13:40:55 -06:00
Gregory Nutt
67bcdf5514 DK-TM4C129X: The network monitor is no enabled by default in NSH configuration 2015-01-05 12:09:33 -06:00
Gregory Nutt
5752f301de Tiva Ethernet: Add support for PHY interrupts 2015-01-03 13:16:26 -06:00
Gregory Nutt
bc1c73244b DK-TM4C129X: Ethernet networking is now enabled by default in the NSH configuration 2015-01-03 10:27:04 -06:00
Gregory Nutt
c47152b2e5 DK-TM4C129X: Fix RAM size in defconfig files 2015-01-03 09:44:02 -06:00
Gregory Nutt
0e29fcc736 DK_TM4C129X: Add more GPIO pin definitions 2015-01-01 14:16:05 -06:00
Gregory Nutt
3ff87bfda0 DK_TM4C129X: Add some GPIO pin definitions 2015-01-01 13:55:53 -06:00
Gregory Nutt
78d0d911b3 TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers 2015-01-01 12:28:46 -06:00
Gregory Nutt
aef65efd38 Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done 2015-01-01 07:55:15 -06:00
Gregory Nutt
ad4de38641 Refresh configuration 2014-12-31 07:32:47 -06:00
Gregory Nutt
a1bff3f9eb Remove menuconfig warning 2014-12-31 07:31:49 -06:00
Gregory Nutt
3a5571da63 stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:50:36 -06:00
Gregory Nutt
a99f6c2061 STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken 2014-12-29 07:02:32 -06:00
Gregory Nutt
715ea79555 STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported 2014-12-29 07:01:36 -06:00
Gregory Nutt
7881675f4e Fir STM32v2: Refresh configuration 2014-12-28 18:29:35 -06:00
Gregory Nutt
4e8a4b073d Fire STM32v2: Fix missing stuff in Kconfig file 2014-12-28 18:29:13 -06:00
Gregory Nutt
d99a4409d4 C5471 EVM: Refresh configurations 2014-12-28 18:15:30 -06:00
Gregory Nutt
34617b7ef0 Cloudctrl: Add missing configuration logic 2014-12-28 17:51:11 -06:00
Gregory Nutt
0c7a828ed3 Compal e86 NSH: Fix numerous typos in Make.defs 2014-12-28 17:34:59 -06:00
Gregory Nutt
84db75e507 Hymini-STM32v USB MSC: Fix configuration. Needs mountpoint support for USB MSC. Refreshed 2014-12-28 17:12:03 -06:00
Gregory Nutt
788541aecf Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled 2014-12-28 16:55:47 -06:00
Gregory Nutt
ef73e1ca03 MBED NSH: Should not have CONFIG_SPI_EXCHANAGE in the configuration 2014-12-28 16:39:02 -06:00
Gregory Nutt
1af7fecb08 Freedom-KL25z: Fix breakage from last configuration refresh 2014-12-28 15:23:37 -06:00
Gregory Nutt
3ad7130f37 Mikroe-STM32F4: Refresh one configurations, turning off DEBUG 2014-12-28 14:39:19 -06:00
Gregory Nutt
61f0dcbde0 LM3S6965-EK: Refresh one configurations, turning off DEBUG 2014-12-28 14:35:47 -06:00
Gregory Nutt
702d760e86 Freedom KL25Z: Refresh one configurations 2014-12-28 14:30:44 -06:00
Gregory Nutt
f785ee138a Eagle100: Refresh one configurations, turning off DEBUG 2014-12-28 14:22:11 -06:00
Gregory Nutt
338d76d84b STM32F429-Disco: Refresh five configurations, turning off DEBUG 2014-12-28 14:04:53 -06:00
Gregory Nutt
19037d6c9e STM32F40G-EVAL: Refresh two configurations, turning off DEBUG 2014-12-28 13:53:53 -06:00
Gregory Nutt
ce4c433037 Refresh Configuration 2014-12-26 09:33:20 -06:00
Gregory Nutt
0e625b64f4 Update px4fmu-v2_upstream config 2014-12-26 08:40:02 -06:00
Gregory Nutt
91bc8712ef Fix columnar alignment in Kconfig file. From David Sidrane 2014-12-26 08:37:27 -06:00
Gregory Nutt
541b26f0ff Cosmet updates to comments and README files 2014-12-24 08:15:21 -06:00
Gregory Nutt
7794c79815 DK-TM4C129X: Fix sense of LEDs; active high. Also GPIO for blue and green reversed 2014-12-22 17:41:04 -06:00
Gregory Nutt
dd89bd2233 TM4C129X: A small step toward understanding new Tiva clocking 2014-12-22 09:30:41 -06:00
Gregory Nutt
fe12140f94 Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3 2014-12-21 15:23:37 -06:00
Gregory Nutt
8aa9f27925 Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h 2014-12-20 08:38:11 -06:00
Gregory Nutt
fa5dffbc18 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
31a0e8ac5e Stuff that goes along with the new LTDC README file 2014-12-19 14:14:41 -06:00
Gregory Nutt
1ff469af5f stm32f429i-disco: add default platform configuration to test framebuffer support for the ltdc 
Memory configuration:

The heap start address of memory region 3 starts at 0xD0000000.
The allocated framebuffer of the layers is addressed up to the end of the memory
region 3.

If the layer pixel format changes e.g. from RGB565 to RGB24, than the memory
configuration must be configured too. Currently an easy memory calculation
is missing for that in Kconfig.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:08:59 -06:00
Gregory Nutt
8d6614b9af stm32f429i-disco: initialize ltdc during bootup 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:05:19 -06:00
Gregory Nutt
61c927904f stm32f429i-disco: enable configuration of framebuffer support for the ltdc controller 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:02:26 -06:00
Gregory Nutt
d2b7dc0eef stm32f429i-disco: Add support for initializing ltdc framebuffer and the configured lcd display 
This adds support for initializing of the ltdc controller and the lcd device connected on the stm32f429i-disco. The following methods are provided for the generic fb interface:

- up_fbinitialize
- up_fbgetvplane
- fb_uninitialize

The following methods are provided for the ltdc interface:

- up_ltdcgetlayer

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:54:27 -06:00
Gregory Nutt
dd51c8db2d stm32f429i-disco: update board definition for the ili9341 LCD display. This configures all LCD settings for the RGB interface. Also adds a customer LCD display template. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:34:37 -06:00
Gregory Nutt
93bcd3e03e TM4C129X: Add custom system control header file (incomplete) 2014-12-19 12:12:52 -06:00
Gregory Nutt
67e6b760e8 Add some OpenOCD scripts for some TI Tiva boards 2014-12-18 16:54:48 -06:00
Gregory Nutt
6cc9716d55 Tiva: Fix configuration logic for IRQ interrupts. The various parts support varying numbers of GPIO blocks and with varying capabilities to support interrupts on the pins of different GPIO blocks 2014-12-18 15:33:52 -06:00
Gregory Nutt
a5fcd71af0 Tiva: Change negative logic CONFIG_TIVA_DISABLE_GPIOx_IRQS to positive logic CONFIG_TIVA_GPIOx_IRQS 2014-12-18 15:19:16 -06:00
Gregory Nutt
e3487f4298 Fix a couple of spelling errors in comments 2014-12-18 13:56:15 -06:00
Gregory Nutt
a1a2e53c3e Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
Gregory Nutt
0c698a7121 DK-TM4C129X: Add support for buttons 2014-12-18 11:51:30 -06:00
Gregory Nutt
c79bc06988 DK-TM4C129X: Add LED support 2014-12-18 10:20:34 -06:00
Gregory Nutt
55a3c57399 DK-TM4C129X: Fixes to get clean build. Logic is still not complete, however 2014-12-18 08:24:24 -06:00
Gregory Nutt
93a21d2872 Freedom-KL25Z: Add pin configuration for add-on ADXL345 board. From Alan Carvalho de Assis 2014-12-18 07:27:49 -06:00
Gregory Nutt
d286c0f32f A previous change increased the task name size allocation by one to hold a NUL terminator. This changes reduces the configured name size by one so that no additional memory is used 2014-12-17 12:30:26 -06:00
Gregory Nutt
2554b5c89a DK-TM4C129X: Switch to Windows/Cygwin + CodeSourcery 2014-12-17 07:00:22 -06:00
Gregory Nutt
09b16e3819 Remove packaging indications for TM4C129 configuration variables 2014-12-16 16:22:52 -06:00
Gregory Nutt
18c61b6e64 Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system 2014-12-16 16:02:21 -06:00
Gregory Nutt
ca757af8fb Add basic board support for the DK-TM4C129X Connected Development Kit. The initial commit is simply the TM4C123G Launchpad with naming changes 2014-12-16 15:29:14 -06:00
Gregory Nutt
30990b43ef Remove EXPERIMENTAL dependency from the Traveler game. It is basically functional now. 2014-12-16 15:27:36 -06:00
Gregory Nutt
b080940701 Update README files 2014-12-16 14:58:25 -06:00
Gregory Nutt
79b736d43a Fix some typos ADXL (adxl) vs ADX1 (adx1) 2014-12-16 13:50:58 -06:00
Gregory Nutt
cb207d5298 A few bugs/typos introduced with my last change 2014-12-16 12:33:41 -06:00
Gregory Nutt
d818ab5e35 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
e513ed9df8 Forgot to add file before last commit 2014-12-16 07:48:58 -06:00
Gregory Nutt
fd40ea4328 Freedom-KL25Z: Add board specific code to interface with ADXL345 driver. From Alan Carvalho de Assis 2014-12-16 07:48:22 -06:00
Gregory Nutt
4aa9320da9 Update README files 2014-12-15 19:01:40 -06:00
Gregory Nutt
df30780f37 Various fixes to traveler joystick input logic and to simulated joystick device 2014-12-14 12:23:19 -06:00
Gregory Nutt
6e1084116b SIM: Add an X11 mouse-based simulation of an analog joystick device 2014-12-14 10:19:07 -06:00
Gregory Nutt
253a4464ad Traveler: Add support for analog joystick 2014-12-14 08:55:18 -06:00
Gregory Nutt
ef25e53f0b TM4C123G LaunchPad: Update STATUS in README file 2014-12-13 07:46:05 -06:00
Gregory Nutt
b818691a3a Tiva I2C: Fix how I2C transactions are started and some I2C error reporting 2014-12-11 12:31:42 -06:00
Gregory Nutt
47c4ce5761 TM4C123G LaunchPad: Add initialization logic for an external AT24 EEPROM. This is intended only to suppport testing of the Tiva I2C driver 2014-12-10 15:56:49 -06:00
Gregory Nutt
a026df3f95 Refresh configuration 2014-12-09 12:18:39 -06:00
Gregory Nutt
928bc5ca84 Update the Tiva I2C register definitions for the TM4C123 and TM4C129 2014-12-09 08:42:12 -06:00
Gregory Nutt
c6cc9b1030 Update README 2014-12-09 06:21:30 -06:00
Gregory Nutt
f31c72d7af Traveler: Add logic to limit the frame rate. This is kind of a silly feature -- why would you ever want to limit the frame rate? Well, you need to that on the simulated platform to make bandwidth for other things to run like the simulated timer 2014-12-08 13:45:17 -06:00
Gregory Nutt
1e3472b487 Travel: Fix more initialization errors, mostly related to file path problems 2014-12-08 12:39:02 -06:00
Gregory Nutt
b26923b746 Extend the simulator to provide special initialization for the Traveler game 2014-12-08 10:54:58 -06:00
Gregory Nutt
847c8ba16f Traveler: Add build configuration for the simulated target 2014-12-08 09:33:56 -06:00
Gregory Nutt
6bb03ca02d Refresh configuration 2014-12-08 08:29:08 -06:00
Gregory Nutt
8bd5556b47 Fix compilation errors if CONFIG_DISABLE_MOUNTPOINT is selected 2014-12-08 07:14:31 -06:00
Gregory Nutt
6ea9af3736 Nucleo-f4x1re: Add pull-ups to joystick button GPIOs 2014-12-04 13:20:47 -06:00
Gregory Nutt
3cc6bee189 Nucleo-f4x1re: Fix some joystick pin definitions 2014-12-04 12:04:21 -06:00
Gregory Nutt
6d7002cf62 Nucleo-f402re: Add an option to use only a minimal set of joystick buttons. This eliminates some GPIO conflicts 2014-12-04 10:58:13 -06:00
Gregory Nutt
b844e92ffa Nucleo-f4x1re: Add comments about pin conflicts; Fix GPIO configuration 2014-12-04 10:15:36 -06:00
Gregory Nutt
c0c455a7c9 Nucleo-F4x1RE: Fix some joystick shield logic 2014-12-04 09:37:46 -06:00
Gregory Nutt
7180175793 Nucleo-F4x1RE: Add support for an analog joystick shield. There are still some ADC issues to be worked through as of the initial commit 2014-12-03 16:41:09 -06:00
Gregory Nutt
1c4a4b9029 Update README 2014-12-03 15:31:33 -06:00
Gregory Nutt
69fcd1c048 SAMA5D3 Xplained: A few fixes for the AJoystick driver (still not working) 2014-12-03 14:33:00 -06:00
Gregory Nutt
1f2447502f SAMA5D3 Xplained: Add support for the Itead Joystick shield 2014-12-03 12:24:23 -06:00
Gregory Nutt
1117041564 Refresh configuration 2014-12-03 09:37:37 -06:00
Gregory Nutt
76906110b0 Correct spelling: MOUNTPOINT not MOUNTPOUNT. Numerous places. Some are problems. From Woohan Lee 2014-12-01 06:41:30 -06:00
Gregory Nutt
9bd9b5ad78 Update README 2014-11-28 18:17:49 -06:00
Gregory Nutt
7c29a1ebb2 STM3210E-EVAL: Add missing initialization for the joystick driver 2014-11-28 15:41:37 -06:00
Gregory Nutt
421c81b315 STM3210E-EVAL: Add a DJoystick driver 2014-11-28 13:31:09 -06:00
Gregory Nutt
33cfa5d8ba STM3210E-EVAL: Don't treat joystick as buttons if the DJOYSTICK driver is enabled 2014-11-28 12:05:08 -06:00
Gregory Nutt
c5cb99d04e Refresh configuration 2014-11-28 11:48:48 -06:00
Gregory Nutt
b4a85739ef STM3210E-EVAL: Rename files for compatibility with current standards 2014-11-28 11:35:47 -06:00
Gregory Nutt
1aafbbdc97 STM3240G-EVAL: Rename files for compatibility with current naming conventions 2014-11-28 11:06:43 -06:00
Gregory Nutt
a92b01e9fb Refresh configuration 2014-11-28 11:05:39 -06:00
Gregory Nutt
57e57bba36 LPC4357 EVB: Ooops got sense of the LED GPIO backward 2014-11-27 12:38:04 -06:00
Gregory Nutt
5268a1e4bb LPC4357-EVB: Fix LEDs; comment out old unimplemented button stuff 2014-11-27 10:28:32 -06:00
Gregory Nutt
17fe02eac3 Minor change to README file 2014-11-27 09:14:58 -06:00
Gregory Nutt
084fe072fc Fix minor typos in C comments 2014-11-27 07:57:32 -06:00
Gregory Nutt
6e6435d438 Fix replicated typo in most of the newly added lpc4357-evb files 2014-11-26 18:34:00 -06:00
Gregory Nutt
6b7718dc2f Add some discussio of the LPC4357 to documentation and README files 2014-11-26 16:44:25 -06:00
Gregory Nutt
878128e040 Misc changes while verifying the clean build of the LPC4357 port 2014-11-26 15:37:54 -06:00
Gregory Nutt
70981eb7d5 Initial support for the LPC4357-EVB provided by Toby Duckworth 2014-11-26 15:18:24 -06:00
Gregory Nutt
2ab604f74f Fix more issues detected by cppcheck 2014-11-25 14:25:02 -06:00
Gregory Nutt
2994448d85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
a78ad24213 If SAM4E-EK is selected, then configs/Kconfig must select ARCH_PHY_INTERRUPT 2014-11-25 08:08:58 -06:00
Gregory Nutt
6f1d62e4cc Nucleo F4x1RE: Stangeness in initialization noted by Sébastien Lorquet 2014-11-24 12:33:24 -06:00
Gregory Nutt
0dae05bda4 Nucleo F4x1RE: Typos in previously untested code. message() does not exist, return value from void function, missing inclusion of errno.h. From Sébastien Lorquet 2014-11-24 11:29:22 -06:00
Gregory Nutt
8c05e06046 Fix BAS configuration from last change; refresh STM32 F4 NSH configuration 2014-11-24 09:12:56 -06:00
Gregory Nutt
6a3a2f466c Update comments and README 2014-11-24 07:25:40 -06:00
Gregory Nutt
15c07e0d67 Network: Misc changes to UDP bind logic for the case of multiple networks 2014-11-21 17:00:08 -06:00
Gregory Nutt
7fa3362ab4 Update READMEs 2014-11-21 14:05:20 -06:00
Gregory Nutt
690d9fc268 apps/examples/bridge: Lots of fixes. I think it is working although I have still have host firewall issues in testing 2014-11-21 10:16:19 -06:00
Gregory Nutt
71d27ec3da apps/examples/bridge: Add host-side test driver 2014-11-21 08:20:25 -06:00
Gregory Nutt
5d231b25f0 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
589f91f7d8 Update README 2014-11-20 14:18:30 -06:00
Gregory Nutt
86c0ef71f2 Refresh STM32F429i Disco USB NSH configuration 2014-11-20 07:55:30 -06:00
Gregory Nutt
cba8179c28 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
8b8dd03e92 Freedom K25Z: Fix missing file inclusion in board Makefile. From Alan Carvalho de Assis 2014-11-19 07:17:46 -06:00
Gregory Nutt
0306ba558a Update README 2014-11-18 14:28:27 -06:00
Gregory Nutt
2d51315e66 SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
f3995c6b0e SAMA5D4-EK bridge configuration: Correct configuration -- PHY interfaces are RMII not MII 2014-11-17 17:44:49 -06:00
Gregory Nutt
fd236ee641 Due to limitations in port unique-ness, have to use unique port numbers in apps/examples/bridge for now 2014-11-17 15:40:37 -06:00
Gregory Nutt
2275045b26 SAMA5D4-EK bridge configuration needs to set software MAC address 2014-11-17 13:16:13 -06:00
Gregory Nutt
a1598152d1 Update ChangeLog 2014-11-17 12:48:01 -06:00
Gregory Nutt
ee50831a5f Change SAMA5D4-EK bridge configuration so that runs out of DRAM 2014-11-17 12:03:40 -06:00
Gregory Nutt
031c06002b configs/sama5d4-ek/bridge: Add a simple test for the dual EMACs on the SAMA5D4 2014-11-17 10:56:02 -06:00
Gregory Nutt
57bcb28991 changes for clean build with Ethernet+SLIP 2014-11-16 11:27:53 -06:00
Gregory Nutt
29dc5916af Change CONFIG_NET_RECEIVE_WONDOW to CONFIG_NET_ETH_TCP_RECVWNDO or CONFIG_NET_SLIP_TCP_RECVWNDO in all defconfig files 2014-11-16 10:49:33 -06:00
Gregory Nutt
72f0145f69 Refresh configuration 2014-11-16 09:36:08 -06:00
Gregory Nutt
d6680d8524 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all configs/ README.txt files 2014-11-16 08:18:56 -06:00
Gregory Nutt
307d869429 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all configuration files 2014-11-16 08:07:16 -06:00