sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
28,115 Commits 1 Branch 0 Tags 291 MiB
af5a8e73d3
Commit Graph

2122 Commits

Author SHA1 Message Date
Gregory Nutt
75a4a5dcbe Back part of a previous CDC/ACM change. Improve some Kconfig comments. 2016-03-19 12:45:33 -06:00
Gregory Nutt
deed28b8f2 USB composite: Fix some errors in conditional compilation 2016-03-19 08:08:40 -06:00
Gregory Nutt
9644d42e91 USB CDC/ACM device: Trivial configuration clean-up 2016-03-19 07:36:39 -06:00
David Sidrane
d2a017d9bb rdreqs was defined as CONFIG_CDCACM_NWRREQS size 2016-03-17 21:47:40 +00:00
David Sidrane
2cfa023039 RD - comments were for WR 2016-03-17 21:45:57 +00:00
Gregory Nutt
242f8ff25f drivers/syslog/note_driver.c: Add a driver that will allow an application to read buffered scheduler instrumentation data 2016-03-17 14:46:00 -06:00
Gregory Nutt
3ef25dc49d AT24xx: Add logic to unregister from the procfs file system if the driver is uninitialized 2016-03-17 09:55:10 -06:00
Max Neklyudov
1951b9df57 Improve m25px driver 2016-03-17 07:37:45 -06:00
Gregory Nutt
e879d0f423 Move scheduler instrumentation hooks out of sched.h (where they seem like application interfaces) and into nuttx/sched.h where it is clare that these are OS internal interfaces. 2016-03-16 11:00:31 -06:00
Frank Benkert
611fb04449 BlockToCharDev: increase sectorsize to 32 bit 2016-03-09 12:44:56 -06:00
Gregory Nutt
1c31e10397 NRF2410L: Add missing conditional logic in vtable initialization 2016-03-08 16:11:08 -06:00
Gregory Nutt
7fa0adff83 Fix a misplaced right bracket 2016-03-08 15:33:33 -06:00
Frank Benkert
4d9c41fd57 AT24XX: Correct address calculation in Multi-Block-Read 2016-03-08 15:31:23 -06:00
Gregory Nutt
0970d43ab8 Cosmetic changes to comments 2016-02-28 07:48:16 -06:00
Gregory Nutt
d777110cbe Eliminate a warning 2016-02-27 07:27:45 -06:00
Sebastien Lorquet
dc7adfa817 drivers/wireless/ieee802154/Kconfig 
drivers/wireless/ieee802154/Make.defs
    Changes to the build infrastructure to include the mrf24j40 driver

include/nuttx/spi/spi.h
    Define a IEEE SPI device

include/nuttx/wireless/ieee802154/ieee802154_radio.h
    This file defines the API of a IEEE 802.15.4 radio device, to be used by the future common MAC 802.15.4 layer

drivers/wireless/ieee802154/mrf24j40.c
drivers/wireless/ieee802154/mrf24j40.h
    The main MRF24J40 IEEE 802.15.4 radio driver

include/nuttx/wireless/ieee802154/mrf24j40.h
    This file allows instanciation of the MRF24j40 driver from board configurations
 2016-02-26 18:39:27 -06:00
Gregory Nutt
1ecb092e51 Add wireless/ieee802154 to the build 2016-02-26 17:27:58 -06:00
Gregory Nutt
cfe018e991 Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS 2016-02-26 16:50:26 -06:00
Gregory Nutt
309beae2cd Move drivers/ieee802154 to drivers/wireless/ieee802154; rename include/nuttx/net ieee802154 to 6lowpan.h 2016-02-26 15:03:16 -06:00
Gregory Nutt
6481aa8a3d Remove drivers/ieee802154/skeleton.c 2016-02-26 11:20:07 -06:00
Gregory Nutt
2f28ca86c2 Clean up some naming; rename net/ieee802154 to net/6lowpan 2016-02-26 10:08:36 -06:00
Gregory Nutt
9ff645a298 drivers/ieee802154: Add a skeleton IEEE802154 driver 2016-02-25 15:11:30 -06:00
Gregory Nutt
b6f5ffa9a8 CDC/AC: too man right parentheses if IFLOW_CONTROL enabled 2016-02-24 11:54:02 -06:00
Frank Benkert
35df528f69 PCA9555: Remove duplicate variable declaration 2016-02-23 07:33:52 -06:00
Alan Carvalho de Assis
ea15ead6cc RGB LED driver 2016-02-22 08:43:32 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
2244ed46bc nuttx/drivers: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 07:32:58 -06:00
Gregory Nutt
bf8120d51d Fix some odd logic in CC3000 semaphore handling. Noted by Vladimir Komendantskiy 2016-02-10 09:50:28 -06:00
Gregory Nutt
216eea4543 Net: Fix some errors introduced into the ENC28J60 driver; fix type of wd_start arguments. 2016-02-04 08:55:10 -06:00
Gregory Nutt
cea3854dea PCA5555: Add logic to make the driver thread safe. Problem noted by Stefan Kolb. 2016-02-03 12:39:11 -06:00
Gregory Nutt
dea24c503a Networking: Remove the HSEC argument from devif_timer. 2016-02-03 12:12:41 -06:00
Gregory Nutt
ff1e057364 Missed one EMAC driver in the last commit 2016-02-03 10:55:51 -06:00
Gregory Nutt
42c365aab1 Duplicate Manuel's EMAC driver fix to every other driver that supports CONFIG_NET_NOINTS 2016-02-03 10:34:10 -06:00
Gregory Nutt
8fa9b99e7c I2C driver should support the RESET method as well 2016-02-03 07:32:25 -06:00
Gregory Nutt
be3e86ec89 Fix a typo in a DEBUGASSERT statement 2016-02-02 14:41:25 -06:00
Gregory Nutt
e5d86dd3fc Oops. Apparently a copy'n'paste was accidentally a cut'n'paste 2016-02-02 12:53:32 -06:00
Gregory Nutt
9ce58ad5b7 I2C: up_i2creset should not be a global function; Now it is an I2C interface method 2016-02-02 11:21:48 -06:00
Gregory Nutt
4a34a199dd I2C: Add an I2C character driver 2016-02-02 08:30:54 -06:00
Gregory Nutt
009e9f76cb I2C: Fixes/improvements from last massive I2C commits 2016-02-02 07:13:03 -06:00
Gregory Nutt
456b5f06dc Clean up some comments 2016-02-01 19:52:16 -06:00
Gregory Nutt
4cfbe50c0d I2C: Fix some compile time issues found with tools/testbuild.sh 2016-02-01 18:02:56 -06:00
Gregory Nutt
69ce24c70c I2C: Remove the setfrequency method from the interface 2016-02-01 16:31:13 -06:00
Gregory Nutt
6ad641888b Add I2C frequency to the i2c_msg_s structure 2016-02-01 14:17:20 -06:00
Gregory Nutt
f9053182d3 I2C: Remove setaddress method 2016-02-01 12:14:31 -06:00
Gregory Nutt
8c9bddf998 I2C: Eliminate the I2C_WRITE and I2C_READ macros 2016-02-01 08:57:22 -06:00
Gregory Nutt
10000841a8 The I2C_TRANSFER method is no longer optional 2016-01-31 14:16:05 -06:00
Gregory Nutt
3a781a2d3f Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:36:47 -06:00
Gregory Nutt
ceb415204e Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 08:00:16 -06:00
Vladimir Komendantskiy
19feab1bd6 drivers/modem/u-blox.c and include/nuttx/drivers/u-blox.h: Add an upper half driver for the U-Blox Modem. From Vladimir Komendantskiy 2016-01-30 07:37:43 -06:00
Gregory Nutt
ca792558bf Update ChangeLog; add ADS1242 driver to build system; fix some typos; eliminate some warning 2016-01-29 07:55:39 -06:00
Entinger Alexander
dc8c14aa53 Driver for the 24-Bit Differential Input ADC ADS1242 that communicates via SPI with a MCU. Reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface. 2016-01-29 07:41:23 -06:00
Gregory Nutt
fd896330d8 Remove the final vestiges of up_spiinitialize() 2016-01-27 09:27:56 -06:00
Gregory Nutt
efb5674742 drivers/ioexpander/pca9555: Now uses i2c_read and i2c_write instead of I2C_READ and I2C_WERITE 2016-01-26 11:07:47 -06:00
Gregory Nutt
b6b3c2be3e Add I2C_TRANSFER based wrappers for I2C_TRANSFER as well 2016-01-26 10:57:51 -06:00
Gregory Nutt
d4a53ee131 I2C: Eliminate the I2C_WRITEREAD method 2016-01-26 10:26:16 -06:00
Gregory Nutt
67f38169b2 drivers/i2c: Move wrapper that implements I2C_WRITEREAD using I2C_transfer from pc9555.c to a new, comon i2c directory 2016-01-26 09:58:18 -06:00
Gregory Nutt
f74fbecf52 PCA9555 I/O expander: Fix an error in addressing noted by Stefan Kolb; convert to use I2C_TRANSFER instead of I2C_WRITEREAD which is not thread safe 2016-01-26 07:59:36 -06:00
xuhang
26d40fa80c drivers/usbhost/hid_parser.c: Wrong size used in memcpy() 2016-01-25 20:00:11 -06:00
Gregory Nutt
b6e128a4ce Merge branch 'master' of bitbucket.org:patacongo/nuttx 2016-01-24 09:15:29 -06:00
Gregory Nutt
564a1ce606 Cosmetic clean-up of comments 2016-01-24 08:21:55 -06:00
Gregory Nutt
31cf7e0900 Fix missing semicolon 2016-01-23 21:21:15 -06:00
Gregory Nutt
d87f7e99d2 NOkia LCD needs to initialize SPI before using it 2016-01-23 19:45:30 -06:00
Gregory Nutt
7ee6c5bcfc Minor clean-up for last big commit 2016-01-23 19:18:55 -06:00
Gregory Nutt
7edf921c5e Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8 All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features 2016-01-23 16:18:13 -06:00
Gregory Nutt
accd99db25 Add an optional hwfeatures method to the SPI interface 2016-01-23 15:12:45 -06:00
Stefan Kolb
2b05f3e830 I/O Expander: Fix some bad macros, make naming consisted 2016-01-22 07:08:59 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
3986f6cdee Part of last change was still in the editor 2016-01-20 13:09:03 -06:00
Frank Benkert
da33ec6b2e CAN: Add more extensive error reporting information 2016-01-18 12:22:27 -06:00
Gregory Nutt
b54cf004f3 Update ChangeLog 2016-01-17 15:15:01 -06:00
Gregory Nutt
9844036a74 Merged in paulpatience/nuttx/lsm9ds1 (pull request #48) 
Add LSM9DS1 accelerometer, gyroscope and magnetometer
 2016-01-17 15:06:37 -06:00
Paul A. Patience
57b8a9526d Add LSM9DS1 accelerometer, gyroscope and magnetometer 2016-01-17 16:01:14 -05:00
Gregory Nutt
63301fe213 Cosmetic changes from review of last pull request 2016-01-17 14:52:11 -06:00
Janne Rosberg
fb1bf10a3d add pn532 support 
Signed-off-by: Janne Rosberg <janne.rosberg@offcode.fi>
 2016-01-17 22:17:49 +02:00
Gregory Nutt
c6d967e632 OVR2640: Reverse frequency/address 2016-01-16 09:05:39 -06:00
Alexander Entinger
75d6c4cee3 drivers/sensors/mcp9844: Driver for the MCP9844 I2C digital temperature sensor with a selectable resolution 2016-01-15 07:25:58 -06:00
Gregory Nutt
51ee01255b ENC28J60: Missing semicolon causes error in some configurations. Noted by Maciej Wójcik 2016-01-09 19:56:47 -06:00
Gregory Nutt
ce2a0b6b51 Eliminate a warning 2016-01-06 10:05:39 -06:00
Vladimir Komendantskiy
ae71c9b447 Fix a compile time error in drivers/net/tun.c. 2016-01-05 10:58:58 -06:00
Gregory Nutt
426eb61e47 Fix an error introduced in the last big set of header file renaming 2015-12-29 18:29:24 -06:00
Gregory Nutt
695a8890a6 Rename pm_internal.h to pm.h 2015-12-29 18:19:03 -06:00
Gregory Nutt
b682190f52 Rename all head files in main NuttX repository with names like *internal.h, removing the internal 2015-12-29 17:31:17 -06:00
Gregory Nutt
a2e1ece873 RTC: Handle RTC failures. If mktime is called with garbage, it may crash 2015-12-21 14:39:40 -06:00
Gregory Nutt
a696b807fb PCF65263: Correct readback verification of seconds register 2015-12-21 14:00:25 -06:00
Gregory Nutt
b1a0171d0f Fix a missed name change in a Kconfig file 2015-12-15 08:43:18 -06:00
Gregory Nutt
8ab93fdf98 Change name of drivers/discrete back to drivers/ioexpander 2015-12-15 08:40:34 -06:00
Gregory Nutt
78f2ce05f8 drivers: Move discrete user LED drivrs from drivers/discrete to drivers/leds 2015-12-15 08:23:53 -06:00
Gregory Nutt
d62a626703 Adds a driver for the PCA9635PW I2C LED driver IC which can be used to control the intensity of up to 16 LEDs. From Alexander Entinger 2015-12-15 08:05:10 -06:00
Gregory Nutt
4a7e28ba96 CDC/ACM: Fix a bad default value in last commit 2015-12-08 07:33:49 -06:00
Gregory Nutt
513cc08c7f change default size of CDC/ACM serial buffer sizes 2015-12-07 17:18:14 -06:00
Gregory Nutt
8fdb173090 drivers/net/telnet.c: Now works like the loop device. A new interface called telnet_initialize() registers a telnet session "factory" device at /dev/telnet. Via ioctl, the factory device can create instances of the telnet character devices at /dev/telnetN to support Telnet sessions. 2015-12-07 13:48:06 -06:00
Gregory Nutt
057b6aef2c drivers/net: Move the Telnet driver from apps/netutils/netnetd to drivers/net 2015-12-07 09:26:57 -06:00
Gregory Nutt
59b912477e Fix some warnings: Mismatched prototypes 2015-12-05 10:36:00 -06:00
Gregory Nutt
2726f0ac7c USB serial driver Kconfig: Select default sizes for serial buffers so that the can hold even multiples of the max packet size. 2015-12-03 14:17:41 -06:00
Gregory Nutt
08213f830d poll() and select() should not be built if poll() is disabled 2015-12-02 05:30:52 -06:00
Gregory Nutt
c16648b3fd Most cosmetic but also includes a fix for a compile problem from Ken Pettit 2015-12-01 12:54:57 -06:00
Gregory Nutt
96f57eb0d9 Merged in karim_keddam/nuttx (pull request #39) 
Fixed error with temperature computation
 2015-11-30 06:13:24 -06:00
Karim Keddam
190772edc5 Fixed error with temperature computation 2015-11-30 03:50:58 -05:00
Gregory Nutt
3af1def49a Fix an error in a function prototype 2015-11-29 14:42:56 -06:00
Gregory Nutt
11afff74dc Kconfig change for improved usability 2015-11-29 12:13:24 -06:00
Ken Pettit
5821af1bbe drivers/mtd: Add support for /dev/smart loop device. From Ken Petit 2015-11-28 09:00:26 -06:00
Gregory Nutt
2a93c66948 include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:08:09 -06:00
Gregory Nutt
603f3afd6d Some minor clean-up from last changes 2015-11-25 17:52:47 -06:00
Gregory Nutt
ed35eb0f8d drivers/loop: Add a loop character device that can be used to setup and teardown loop devices 2015-11-25 17:13:56 -06:00
Gregory Nutt
b84da6e696 drivers/loop: Move drivers/loop.c to drivers/loop/losetup.c 2015-11-25 16:23:19 -06:00
Gregory Nutt
6ff67d3061 Minor changes from code review 2015-11-25 14:57:25 -06:00
Ken Pettit
d4a58af380 drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry. 
drivers/mtd/filemtd.c:  New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device.  This is useful for testing on the simulation using the hostfs.

From Ken Petit
 2015-11-25 14:46:28 -06:00
Marco Krahl
b1b97e89c8 drivers/lcd/ili9432.c: Fixed errors in orientation. Portrait, RPortrait, and RLandscript should work correly now. They were displayed mirrored. From Marco Krahl 2015-11-25 13:01:37 -06:00
Gregory Nutt
289b3e281f drivers/mtd/smart.c: Fix a compile error when CONFIG_MTD_SMART_MINIMIZE_RAM=y 2015-11-22 17:18:43 -06:00
Gregory Nutt
891589b307 drivers/mtd/smart.c: Add some run-time geometry tests 2015-11-22 17:10:42 -06:00
Gregory Nutt
54549ef082 Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'" 
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
 2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs' 
directory and build.
 2015-11-22 10:07:35 -06:00
Gregory Nutt
006528b144 Add support for freopen() 2015-11-22 08:39:17 -06:00
Gregory Nutt
dcb85af387 Add logic to automatically wrap a block device as a BCH device with no visible character device 2015-11-21 10:14:01 -06:00
Gregory Nutt
f03e435e43 drivers/bch: Add support for delayed unlinking of BCH driver 2015-11-21 09:15:12 -06:00
Gregory Nutt
8914400750 PCF85163: Correct I2C address 2015-11-21 07:14:36 -06:00
Gregory Nutt
294950ea3d PCF85263: Need to clear the 100ths of second register when setting the time 2015-11-20 17:39:41 -06:00
Gregory Nutt
38c9d42e21 drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC 2015-11-20 17:36:10 -06:00
Gregory Nutt
3cff8a725b Add a missing comment 2015-11-20 16:13:28 -06:00
Gregory Nutt
11c0f5be6f Clear some trailing whitespace 2015-11-20 16:10:01 -06:00
Gregory Nutt
26cbdd8939 Completes PCF85263 RTC register definition header file. 2015-11-20 16:09:23 -06:00
Gregory Nutt
eb4c2f9c41 PCF85263 RTC register definition header file. Incomplete on initial commit 2015-11-20 14:51:43 -06:00
Gregory Nutt
db2fe45666 Update some comments 2015-11-20 09:55:18 -06:00
Ken Pettit
d30b73be82 W25: Add support for byte write mode. From Ken Petit 2015-11-20 07:34:07 -06:00
Gregory Nutt
9af0ee7fdb DS323x: Costmetic cleanup 2015-11-19 19:43:01 -06:00
Gregory Nutt
b951533514 DS3232 not DS3234 2015-11-19 19:31:52 -06:00
Gregory Nutt
9a1ca0d489 Add support for DS1302 and DS3232 RTC chips 2015-11-19 19:26:09 -06:00
Gregory Nutt
367d8020be Add some definitions for future support for the DS3234 SPI RTC 2015-11-19 15:57:36 -06:00
Gregory Nutt
892ba4f26a DS1307: Change year bias to 1968 which is a leap year juse like 2000 2015-11-19 15:12:40 -06:00
Gregory Nutt
c34b5108a7 RTC: Fix system time initialization when using an exernal RTC. Fix some bugs in the DS1307/DS3231 RTC driver 2015-11-19 14:54:30 -06:00
Gregory Nutt
1c86c004c4 FLASH progmem memory MTD: Need to register with PROCFS if enabled 2015-11-19 06:57:02 -06:00
Ken Pettit
7b590ec9a2 drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit 2015-11-18 18:12:06 -06:00
Gregory Nutt
622ea95ab1 drivers/timers/ds3213.c: Extend to include support for the DS1307 RTC 2015-11-18 08:43:19 -06:00
Ken Pettit
f0f7dd9956 drivers/mtd/smart.c: Fix a Smart wear-leveling bug. From Ken Petit 2015-11-18 07:01:13 -06:00
Ken Pettit
7e58e4c4cf W25: Fix W25 page read/write logic 2015-11-18 06:56:53 -06:00
Gregory Nutt
b60422836e Fix some stylistic issues found by tools/nxstyle 2015-11-17 17:38:46 -06:00
Gregory Nutt
a654f35d98 Fix some stylistic issues found by tools/nxstyle 2015-11-17 17:35:17 -06:00
Gregory Nutt
8d963e66cf Fix some stylistic issues found by tools/nxstyle 2015-11-17 17:31:57 -06:00
Gregory Nutt
5a99735782 (Hopefully) cosmetic changes from review of recent merges for conformance to coding standard 2015-11-17 16:54:15 -06:00
Gregory Nutt
25c4ff8285 Update some comments 2015-11-17 16:29:34 -06:00
Karim Keddam
522d891759 Fixed a bug with the ms58xx sensor initialization 2015-11-17 17:21:46 -05:00
Karim Keddam
2578994e74 Fixed a bug with the CRC for the ms58xx sensor 2015-11-17 17:19:11 -05:00
Gregory Nutt
249fa2475b Add logic to detect rollowing while reading or setting the time 2015-11-17 14:39:47 -06:00
Gregory Nutt
45530a77d4 Add support for DS3231 I2C RTC. Untested on initial commit. 2015-11-17 14:07:55 -06:00
Gregory Nutt
e61d51dab3 If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource 2015-11-17 08:39:06 -06:00
Gregory Nutt
f5722bc6dd Merged in slorquet/nuttx/pca9555 (pull request #32) 
Pca9555 interrupt support.
 2015-11-17 07:45:33 -06:00
Gregory Nutt
724901ceb9 Add support for multiple AT24xx EEPROM devices 2015-11-17 07:40:17 -06:00
Sebastien Lorquet
c7999141e7 Merge branch 'master' into pca9555 2015-11-17 14:12:03 +01:00
Sebastien Lorquet
826aadbce8 Include support for PCA9555 interrupt driven IO changes detection. 
Currently using a signal, and a single notified task.
signal handling support moved to generic IO expander header (not pca specific)
 2015-11-17 14:09:43 +01:00
Gregory Nutt
c955cdccd9 Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h 2015-11-16 13:31:02 -06:00
Gregory Nutt
ab9d124528 serial: Remove confusing inline functions. Correct attribution for serial DMA logic 2015-11-15 08:39:01 -06:00
Gregory Nutt
7f1ac36194 Serial driver: Move serial DMA logic to a separate file 2015-11-15 07:58:08 -06:00
Gregory Nutt
815ec07b55 CAN: A minor improvement to can_txready design 2015-11-15 06:36:30 -06:00
Gregory Nutt
5e241cd157 CAN Kconfig: Resolve a circular dependency. I am not sure if the correct version foolproof, however 2015-11-14 13:36:48 -06:00
Gregory Nutt
81ab270a96 CAN driver: Removing call to can_xmit() from can_txready() in a previous commit was a mistake. This commit restores the call to can_xmit(), but does the call in a safer environment on the work thread. 2015-11-14 10:33:02 -06:00
Gregory Nutt
015429684f MTD progmem: Fix an address calculation 2015-11-13 11:32:34 -06:00
Sebastien Lorquet
8242600e5e WIP for pca9555 irq 2015-11-13 16:28:46 +01:00
Gregory Nutt
2706b4f8aa mtd_progmem.c: Fix calculation of block size 2015-11-13 09:19:25 -06:00
Gregory Nutt
fdb17620a0 Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h 2015-11-12 16:03:24 -06:00
Max Neklyudov
d54a39832a Implement high level DMA infrastructure for serial devices 2015-11-12 14:16:19 -06:00
Gregory Nutt
ef59f83a38 drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h 2015-11-12 13:40:18 -06:00
Gregory Nutt
55686245c1 Back out a part of the previous commit 2015-11-12 07:53:42 -06:00
Frank Benkert
4a8626d332 CAN: Don't disable TX interrupts if the S/W TX FIFO is empty but the hardware supports a H/W TX FIFO 2015-11-12 07:46:05 -06:00
Gregory Nutt
9f3edd6373 MTD Smart: Remove checks for 64KB erase block size. erasesize was changed to 32-bits in struct mtd_geometry_s 2015-11-11 08:25:03 -06:00
Gregory Nutt
2ff1b173f2 SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand 2015-11-11 08:15:08 -06:00
Gregory Nutt
08200d8f86 S24FL1: Fix so that the driver compiles with 512 byte block support 2015-11-10 13:34:33 -06:00
Gregory Nutt
eb1191df63 S24FL1: Fix an error in the page write logic 2015-11-10 12:48:29 -06:00
Gregory Nutt
965addb397 s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up 2015-11-10 11:33:35 -06:00
Gregory Nutt
1ed69cd535 Fix another corner case in the upper half CAN driver 2015-11-10 07:41:40 -06:00
Gregory Nutt
896834002a BCH driver should forward ioctl commands to the contained block driver 2015-11-09 11:47:25 -06:00
Gregory Nutt
2ab0832c26 Smart MTD: fix some outdated logic: geometray erase size is now 32-bits 2015-11-09 09:35:14 -06:00
Gregory Nutt
95562f8a86 CAN driver: More improved comments 2015-11-08 07:43:57 -06:00
Gregory Nutt
874862abb9 CAN driver: Improve some comments 2015-11-08 07:00:09 -06:00
Gregory Nutt
91429433f6 Correct naming of Spansion part. S25FL1, not ST25FL1 2015-11-07 11:51:09 -06:00
Gregory Nutt
b2bdba0824 S25FL1 FLASH driver: Fix return value from the bwrite() method 2015-11-07 11:26:53 -06:00
Gregory Nutt
bfeef77f1f SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard 2015-11-05 11:25:39 -06:00
Gregory Nutt
a314b2ac11 ST25FL1: Fix error that was overwriting status 2015-11-05 10:38:47 -06:00
Paul A. Patience
b5a77b9403 RAMLOG: Fix forgotten FARs 2015-11-05 10:38:42 -05:00
Gregory Nutt
c6fc285277 CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages 2015-11-03 10:52:58 -06:00
Gregory Nutt
51d29d3c97 Merged in paulpatience/nuttx/pwm (pull request #29) 
PWM: Add support for multiple output channels per timer
 2015-11-01 16:40:06 -06:00
Paul A. Patience
e8c2466c1c PWM: Add support for multiple output channels per timer 2015-11-01 17:15:12 -05:00
Gregory Nutt
7041ba8071 Add comments to Make.defs file 2015-11-01 15:07:58 -06:00
Gregory Nutt
fc91ded815 Add support for a general user LED lower-half driver 2015-11-01 14:57:22 -06:00
Gregory Nutt
0dea00177e Add a generic user LED upper half discrete driver 2015-11-01 14:41:40 -06:00
Gregory Nutt
cbb78071b3 Rename ioexpander/ directories to discrete/ 2015-11-01 13:14:48 -06:00
Frank Benkert
e772c56ef6 AT24xx EEPROM Driver: Correct typo from last changeset 2015-10-31 09:04:53 -06:00
Gregory Nutt
46b688e701 Merged in marten_svanfeldt/nuttx-public/for_upstream/at24cxx (pull request #28) 
Improvements of AT24xx MTD driver
 2015-10-22 18:15:39 +08:00
Marten Svanfeldt
a31d1fd378 Make I2C frequency configurable for the AT24Cxx EEPROM driver 
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2015-10-21 12:01:36 +08:00
Marten Svanfeldt
af9590eef7 Extend the AT24Cxx MTD driver with support for -04,-08 and -16 parts. 
These parts utilize the same one-byte-address in the I2C protocol as the -02,
but requires different I2C addresses for different banks of the EEPROM.

Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2015-10-21 12:01:36 +08:00
Gregory Nutt
d8731d0ef1 Add files missed in previous commit 2015-10-18 08:00:06 +08:00
Alan Carvalho de Assis
0ba6f21532 Add support to Thermocouple-to-Digital converter MAX6675 2015-10-18 07:52:47 +08:00
Gregory Nutt
a5f44cd9fc Buttons lower half: Undefine __KERNEL__ before including board.h to suppress bad included; fix some configuratin issues 2015-10-13 09:29:23 -06:00
Alan Carvalho de Assis
8f0c912fff Add Zero Cross device driver support 2015-10-13 07:27:16 -06:00
Gregory Nutt
f0b40ba96a Add a a generic lower half button driver 2015-10-13 07:08:11 -06:00
Gregory Nutt
75fcf4e8a1 Trivial fixes to spacing 2015-10-12 14:53:47 -06:00
Gregory Nutt
613798027e Add a button upper/lower half driver 2015-10-12 14:29:43 -06:00
Gregory Nutt
cdc646ae68 Another typo introduced in previous commit 2015-10-10 12:31:31 -06:00
Gregory Nutt
796d52b3e1 Fix a typo introduced with last commits 2015-10-10 12:24:31 -06:00
Gregory Nutt
5f9c47a83f drivers/wireless: Fixes to spacing and alignement 2015-10-10 11:51:32 -06:00
Gregory Nutt
cf14f8d1b5 drivers/: Fixes to spacing and alignement 2015-10-10 10:41:00 -06:00
Pierre-noel Bouteville
59e5e2f5cc drivers/lcd/st7565.c: Extend to include support for the ERC12864-3. From Pierre-noel Bouteville 2015-10-07 14:30:08 -06:00
Gregory Nutt
bb05de4b6e Remove TABs 2015-10-04 16:01:21 -06:00
Gregory Nutt
af086c40ff Remove dangling whitespace 2015-10-04 15:28:54 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
863ded3584 Standardize the width of all comment boxes in C header files 2015-10-03 07:45:15 -06:00
Gregory Nutt
16b32bbadd Standardize the width of all comment boxes in C files 2015-10-03 07:25:53 -06:00
Gregory Nutt
0f90500f72 Standardize the width of all comment boxes in header files 2015-10-02 17:48:24 -06:00
Gregory Nutt
5b51a9fcdd Standardize the width of all comment boxes in C files 2015-10-02 17:43:18 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
ac394041bf Standardize nameing of the pre-processor definitiongs group header 2015-10-02 14:17:29 -06:00
Alan Carvalho de Assis
c52e3e017b Battery Charger: Add BQ24250 driver 2015-09-20 09:47:00 -06:00
Alan Carvalho de Assis
895ad29b0d Fix IOCTL definition to avoid duplication and mess 2015-09-19 13:58:49 -06:00
Alan Carvalho de Assis
3cd7558a5e Add basic infrastructure for Battery Charger 2015-09-19 13:06:43 -06:00
Alan Carvalho de Assis
9f465fc502 Rename battery.[ch] to battery_gauge.[ch] 2015-09-19 11:00:14 -06:00
Alan Carvalho de Assis
3a8b00f09f max31855 driver fix from Alan Carvalho de Assis 2015-09-14 07:47:21 -06:00
Alan Carvalho de Assis
c4cf5be231 Add support to Maxim MAX31855 Thermocouple-to-Digital 2015-09-13 15:56:48 -06:00
Gregory Nutt
ce27334f23 Refresh sub-modules 2015-09-11 14:32:07 -06:00
Paul A. Patience
9f108b7b63 Fix issues detected by clang 2015-09-10 20:59:43 -04:00
Pierre-noel Bouteville
8651e0f2ca CC3300: Add const to pointers in arguments to wlan_connect; remove an unused function prototype 2015-09-09 16:34:37 -06:00
Gregory Nutt
afdb3c751a Fix typos from a previous commit 2015-09-08 12:45:30 -06:00
Gregory Nutt
bb595777fd Eliminate warnings 2015-09-08 10:21:19 -06:00
Gregory Nutt
a7e43c7fdb Eliminate some warnings 2015-09-08 09:20:18 -06:00
Gregory Nutt
48d7930631 CC3300: Eliminate some compile time warnings 2015-09-08 07:37:19 -06:00
Gregory Nutt
dbc9d67b3a USBDEV Kconfig: CONFIG_USBDEV_TRACE_INITIALIDSET missing from Kconfig file 2015-09-08 07:25:21 -06:00
Paul A. Patience
c080146748 SSD1351 driver: add 8-bit parallel interface 2015-09-06 13:28:28 -04:00
Gregory Nutt
7d33e858dd QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory 2015-09-06 09:37:34 -06:00
Gregory Nutt
9c66bde5b0 Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1 2015-09-05 09:10:48 -06:00
Gregory Nutt
f44320d2a6 ST25FL1: SAMV71 QSPI always does transfers in multiples of 4 bytes 2015-09-02 10:19:47 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Gregory Nutt
ebd97dcf89 ST25FL1: Make buffers all even multiple of 32-bit values 2015-08-31 10:18:50 -06:00
Gregory Nutt
2d84270552 ST25FL1: Correct some compile problems when file system debug is enabled 2015-08-31 09:25:14 -06:00
Gregory Nutt
ed750f3600 ST25FL1: Changes after review of ST24FL1 clocking 2015-08-29 18:54:20 -06:00
Gregory Nutt
d6b0a8fe72 ST25FL1 driver is code complete 2015-08-29 15:58:54 -06:00
Gregory Nutt
883c6a7cea Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-29 08:02:57 -06:00
Gregory Nutt
8c001f6807 Merged in paulpatience/nuttx (pull request #21) 
Add SSD1351 OLED controller support
 2015-08-28 17:01:24 -06:00
Paul A. Patience
01b68e90d0 Add SSD1351 OLED controller support 2015-08-28 18:37:01 -04:00
Gregory Nutt
4a1951b192 ST25FL1: Flesh out FLASH write logic 2015-08-28 12:01:08 -06:00
Gregory Nutt
d2653ef7a8 ST25FL1: Update for changes to QSPI interface definitions 2015-08-28 10:15:39 -06:00
Gregory Nutt
361e35a7be QSPI: Make changes to interface to better work with the SAMV71 2015-08-27 14:16:51 -06:00
Gregory Nutt
d06b709652 Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-27 12:12:24 -06:00
Gregory Nutt
8811681d7f networking: Big performance improvement for local loopback driver 2015-08-27 11:05:53 -06:00
SaeHie Park
a268e0aeb9 Fix a typo from an earlier commit 2015-08-26 18:12:58 -06:00
Gregory Nutt
7936819fcc ST25FL1: Flesh out more initialization logic 2015-08-26 14:16:45 -06:00
Gregory Nutt
e6be3cea9f Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-26 10:44:35 -06:00
Gregory Nutt
7a168a791f Networking: Fix loopback device MTU 2015-08-26 10:33:44 -06:00
Gregory Nutt
044f5d38ac Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-26 07:20:36 -06:00
Juha Niskanen
70620d3dd6 rivers/rwbuffer: Fix some logic errors 2015-08-26 07:18:50 -06:00
Gregory Nutt
1cf57ae2bd Cosmetic 2015-08-26 07:16:07 -06:00
Gregory Nutt
32de036490 Local loopback: Set the IFF_UP flags during initialization because the local loopback device is always up 2015-08-25 20:09:12 -06:00
Gregory Nutt
8fe0121e1a Convert fragmentation ST24FL1 driver to use QSPI interface 2015-08-25 17:20:54 -06:00
Gregory Nutt
94ecf7ebad drivers/mtd/st25fl1.c: Add a driver for ST25FL1*K QuadSPI FLASH parts 2015-08-25 09:10:12 -06:00
Gregory Nutt
79aa3d40b0 Kconfig: CONFIG_NET_MULTILINK and CONFIG_NET_MULTINIC must be support if the loopback device and any real network device are selected 2015-08-25 06:51:15 -06:00
Gregory Nutt
a2c0068011 Fix some IPv6 loopback device problems 2015-08-24 17:27:38 -06:00
Gregory Nutt
3018dc31e5 Network local loopback: Another structural simplication 2015-08-24 16:08:17 -06:00
Gregory Nutt
eea69cf6e3 Networking: Local loopback, fix a error in last commit + fix a bad functional partitioning 2015-08-24 15:23:09 -06:00
Gregory Nutt
4d040d572a Networking: Eliminate recursion from the local loopback driver 2015-08-24 15:16:03 -06:00
Gregory Nutt
3c5f817513 Networking: Local loopback is basically functional and is no longer EXPERIMENTAL 2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1 Networking: With these changes, I can ping the local loopback device from the simulator 2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978 Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL 2015-08-24 11:29:54 -06:00
Gregory Nutt
ccb24e1766 drivers/net: Add a basic prototype for a local loopback device 2015-08-24 11:03:36 -06:00
Gregory Nutt
e21501c699 Merge remote-tracking branch 'origin/master' into localhost 2015-08-24 08:29:36 -06:00
Gregory Nutt
ea2fafb024 Add definitions to support a local loopback link layer 2015-08-24 08:25:08 -06:00
Gregory Nutt
3743d3d84a Add configuration options for forthcoming st25fl1 devices 2015-08-24 08:00:39 -06:00
Max Neklyudov
622c5c9aa6 Another TUN driver fix from Max Neklyudov 2015-08-21 07:40:13 -06:00
Max Neklyudov
425146255a Network drivers: Fix bug in tun interface driver. From Max Neklyudov 2015-08-17 09:04:58 -06:00
Gregory Nutt
51f386d08a Fix more common typos 2015-08-16 11:07:23 -06:00
Gregory Nutt
77f5c34af0 Fix some common typos 2015-08-16 11:00:30 -06:00
Paul A. Patience
3303ef8c85 Added support for other MS58XX altimeters. 2015-08-14 20:04:16 -04:00
Gregory Nutt
a543dfbcec Update ChangeLog; Convert a few tabs to spaces 2015-08-11 21:12:15 -06:00
Paul A. Patience
c4b888b41d Added MS5805 altimeter. 2015-08-11 22:50:11 -04:00
Paul A. Patience
a634ad5528 Added MB7040 sonar. 2015-08-11 13:26:56 -04:00
Paul A. Patience
65792c5dbc Added forward declarations of structures to fix header inclusion 
order bugs.
Removed an unused variable.
Added debug asserts to check for invalid I2C addresses.
 2015-08-10 16:18:37 -04:00
Paul A. Patience
c0964a17b4 Fixed a forgotten FAR, a typo, and an incorrect bit-field definition. 2015-08-10 14:45:40 -04:00
Gregory Nutt
9f1d7cddd8 Merged in paulpatience/nuttx (pull request #14) 
Converted the AS5048B to use the quadrature encoder interface, changed copyright notice to my boss's preference, and updated ChangeLog to use my full name
 2015-08-10 12:22:30 -06:00
Paul A. Patience
877d5f3b09 Changed copyright notices to my boss's preference. 2015-08-10 14:15:07 -04:00
Paul A. Patience
1d0e25af30 Convert the AS5048B to use the quadrature encoder interface. 2015-08-10 13:41:39 -04:00
David Sidrane
c83d92e846 RAMTRON: Update driver to include support for newer RAMTRON parts. 2015-08-10 11:30:37 -06:00
Gregory Nutt
b6d6776d02 Add a preliminary definition for an SPI slave interface 2015-08-08 10:45:15 -06:00
Gregory Nutt
e9bbc57831 Merged in paulpatience/nuttx (pull request #12) 
Added AS5048B magnetic rotary encoder.
 2015-08-07 15:33:48 -06:00
Paul A. Patience
b7e0fc34c5 Added AS5048B magnetic rotary encoder. 2015-08-07 17:22:01 -04:00
Gregory Nutt
834e01ea7c can.c: Fix a couple of missed DLC conversions 2015-08-07 11:41:31 -06:00
Gregory Nutt
6d59603610 Trivial updates from review of LM92 driver; Update ChangeLog 2015-08-06 16:33:02 -06:00
Gregory Nutt
41a09a6d64 Merged in paulpatience/nuttx (pull request #11) 
Added LM92 temperature sensor.
 2015-08-06 16:26:26 -06:00
Paul A. Patience
282c4f5347 Added LM92 temperature sensor. 2015-08-06 17:35:34 -04:00
Gregory Nutt
0dd273935a Standardize naming of all SLIP configuration options 2015-08-06 15:08:15 -06:00
Gregory Nutt
86769101a1 SLIP: Review code, update comments, add missing configuration items 2015-08-06 14:32:12 -06:00
Gregory Nutt
e1c902d468 Remove some incorrect comments 2015-08-06 14:06:43 -06:00
Gregory Nutt
007e258c2b Update some function headers 2015-08-05 16:22:40 -06:00
Gregory Nutt
4b58990362 CAN: Add CAN FD mode as a configuration option 2015-08-05 13:56:48 -06:00
Gregory Nutt
36d4559ee8 CAN: Define IOCTL commands that manage filters 2015-08-05 13:00:31 -06:00
Gregory Nutt
e3decca82c Cosmetic update to some comments 2015-08-05 08:07:58 -06:00
Anton D. Kachalov
2db954c189 Add support for multicast address (via hashtable) 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 19:43:17 +03:00
Gregory Nutt
679ae385aa Merged in rnouse/nuttx (pull request #9) 
Custom IOCTL support and more shadow warnings fixup
 2015-08-03 06:46:43 -06:00
Anton D. Kachalov
1bb74504a8 Add support for custom platform IOCTL on UART 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 15:32:51 +03:00
Gregory Nutt
08d83cfae3 Merged in rnouse/nuttx (pull request #8) 
UART 16550: putc logic fixup
 2015-08-03 06:32:17 -06:00
Anton D. Kachalov
a07ed262b4 Revert "Two more places there THRE is used with inverted sense" 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:21:01 +03:00
Anton D. Kachalov
2fa6237b49 Revert THRNE-patch. The problem was in u16550_putc 
Regarding to:
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1584
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1913

When UART_LSR_THRE bit is set, then we ready to transmit more.

Current u16550_putc loops while UART_LSR_THRE bit is set. This logic have to be inverted.

Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:19:55 +03:00
Gregory Nutt
15db2a45a4 drivers/net/slip.c: Fix another compilation error 2015-08-02 07:20:36 -06:00
Gregory Nutt
3bc46d9aad Merged in rnouse/nuttx (pull request #6) 
[drivers/serial/uart_16550] Typo fix in data bits setup
 2015-07-31 11:25:35 -06:00
Anton D. Kachalov
274b7986be [drivers/serial/uart_16550] Typo fix in data bits setup 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 20:19:54 +03:00
Gregory Nutt
e0fdd46292 USB host file uses DEBUGASSERT and so must include assert.h. Note by Brennan Ashton 2015-07-31 07:24:43 -06:00
Gregory Nutt
3669292024 Cosmetic changes from review of pull request 2015-07-31 07:17:07 -06:00
Anton D. Kachalov
2ef03d49fe [drivers/net/ftmac100] Remove private board-specific interrupt configuration calls. Configure Mode/Level outside of the driver scope. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 14:12:10 +03:00
Anton D. Kachalov
7613d97a90 [drviers/net/ftmac100] receive: process all available RX descriptors 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 08:48:13 +03:00
Anton D. Kachalov
cbd4586cad [drivers/net/skeleton] Add missed #endif 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-30 23:16:34 +03:00
Juha Niskanen
c33d61e00e Add missing configuration option for last set of ADC changed 2015-07-30 07:38:45 -06:00
Gregory Nutt
fb82061bf7 Two more places there THRE is used with inverted sense 2015-07-29 20:42:49 -06:00
Gregory Nutt
8935ff34d5 16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov 2015-07-29 16:31:21 -06:00
Anton D. Kachalov
f230c87fba Fix a type in the network driver skeleton file. 2015-07-29 16:08:56 -06:00
Anton D. Kachalov
88861e562a Add support for a Faraday FTMAC100 Ethernet MAC Driver. From Anton D. Kachalov 2015-07-29 15:57:58 -06:00
Gregory Nutt
bb30fa039f Fix a warning detected by tools/tesbuild.sh. function was not returning the correct value in the case of errors 2015-07-22 15:46:43 -06:00
Alan Carvalho de Assis
a01b2e5bbc drvers/sensor and include/nuttx/sensors: Add support to Bosch BMP180 barometer. From Alan Carvalho de Assis. 2015-07-20 07:18:27 -06:00
Gregory Nutt
5a7b2757aa Add definitions for SMSC LAN8742A PHY 2015-07-19 13:09:48 -06:00
Gregory Nutt
cb5a3bd84d Fix error in Kconfig of previous change: Can't mix tabs and spaces in help text 2015-07-17 08:31:21 -06:00
Gregory Nutt
652371c919 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
bf1adc1e55 Another CAN driver fix: From inspection, it appears that RTR counter was not being handled correctly 2015-07-15 19:52:08 -06:00
Gregory Nutt
f41df38b0b More CAN driver fixes: remove and unused semaphore. Looks to me that waiter counts are not being initialized 2015-07-15 19:27:36 -06:00
Gregory Nutt
048d338808 Another oops. I introduced a but in a previous commit. The CAN read method nees to return an error if sem_wait() fails for any reason 2015-07-15 18:51:31 -06:00
Gregory Nutt
621fef2c31 Some trivial clean up associated with the last commit 2015-07-15 18:43:53 -06:00
Gregory Nutt
320c584888 CAN driver: Fix a problem where the rx_sem count can grow without bounds 2015-07-15 18:20:08 -06:00
Alan Carvalho de Assis
d7d15072c4 Updated SSD1306 driver 2015-07-15 13:28:31 -06:00
Gregory Nutt
8580d37352 SSD1306: Rename ssd1306_helpers.h to ssd1306.h. Move all SSD1306 driver definitions from ssd1306_base.c to ssd1306.h 2015-07-15 11:46:28 -06:00
Alan Carvalho de Assis
a3e24a0b6c Modify the SSD1306 LCD driver to support either the SPI or I2C interface. From Alan Carvalho de Assis, 2015-07-15 11:21:54 -06:00
Sebastien Lorquet
9c9b6162d8 PCA9555: Extend interface to include methods for reading more than one bit at a time. From Sébastien Lorquet. 2015-07-10 10:33:07 -06:00
Gregory Nutt
3971d97332 Update ChangeLog 2015-07-09 08:27:08 -06:00
Sebastien Lorquet
b947002d6a This commit adds: 
-headers in nuttx/ioexpander to define the "generic" ioexpander framework
-files in drivers/ioexpander for the implementation of the NXP PCA9555 framework
-bindings in drivers/Kconfig and drivers/Makefile

From Sebastien Lorquet
 2015-07-09 08:27:07 -06:00
Gregory Nutt
be09a87c0e SST25: Eliminate some warnings 2015-07-03 14:38:33 -06:00
Sebastien Lorquet
c9649b5f04 STMPE811: I found that, in stmpe811_instanciate(), when CONFIG_STMPE811_MULTIPLE is enabled, and the call to stmpe811_checkid() fails, then the linked device list is not restored to its previous state. From Sebastien Lorquet. 2015-07-02 08:19:29 -06:00
Gregory Nutt
09c7373f24 Fix misc. compilation error/warning detected by tools/testbuild.sh 2015-07-01 14:33:37 -06:00
Gregory Nutt
8fbac280e9 drivers/net/slip.c: Fix a missed name change when many of network interface names changed sometime back but were apparently never updated for SLIP 2015-07-01 11:58:06 -06:00
Gregory Nutt
e9a4455038 drivers/usbdev: Eliminate some warnings 2015-07-01 10:02:19 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
bb7e15fc57 Misc. improvements to the TUN driver, mostly related to poll(). From Max Neklyudov 2015-06-04 06:54:55 -06:00
Gregory Nutt
391367e8ca LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY. 2015-06-03 17:34:36 -06:00
Gregory Nutt
7355a9044a TUN driver bug fix. From Max Neklyudov. 2015-06-03 10:45:13 -06:00
Gregory Nutt
4f05c80794 LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation 2015-06-01 08:07:32 -06:00
Gregory Nutt
0476d8168a More missing semicolons after DEBUGASSERT 2015-05-27 13:32:39 -06:00
Gregory Nutt
9e1c72e3e2 Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build 2015-05-18 13:16:32 -06:00
Gregory Nutt
82f51d01fb Update some comments 2015-05-18 08:53:24 -06:00
Gregory Nutt
d43a09275a AT24 EEPROM driver. Fix some an incorrect variable name used in conditional compilation. SourceForge patch #55 2015-05-15 06:15:58 -06:00
Gregory Nutt
2b3241d81f Clean up some logic in the CDC/ACM host drivers. Test with some other host controller drivers. There are lots of problems. 2015-05-14 10:22:08 -06:00
Gregory Nutt
5b687f4b0f Fix several defien -> define. Thanks Pierre 2015-05-13 06:33:17 -06:00
Gregory Nutt
6ef7977b65 USB device. All class drivers. There needs to be a check to make sure that the size of a returned string does not exceed the size of an allocated request buffer 2015-05-12 14:46:35 -06:00
Gregory Nutt
3c1af2feed Local sockets: Add poll support for Unix stream sockets. From Jussi Kivilinna. 2015-05-12 07:41:12 -06:00
Gregory Nutt
9df6bd0543 USB host CDC/ACM driver requires CONFIG_SERIAL_REMOVABLE 2015-05-11 15:10:41 -06:00
Gregory Nutt
2f8d7f3a03 CDC/ACM host: Cancelling activity on bulk endpoint fixes a crash when device removed 2015-05-11 12:47:37 -06:00
Gregory Nutt
c7a02488c6 Fix a cut'n'paste error in the last commit 2015-05-10 10:23:23 -06:00
Gregory Nutt
46e5d0a419 Add options to support all three host CDC/ACM protocols: Compliant, Reduced, and Bulk-Only 2015-05-10 08:16:58 -06:00
Gregory Nutt
bd437bfb03 Update ChangeLog 2015-05-09 16:23:19 -06:00
Gregory Nutt
4715a2e697 Update TODO list 2015-05-09 08:23:11 -06:00
Gregory Nutt
6519dc475d Use sched_kfree() instead of kmm_free() 2015-05-08 12:03:45 -06:00
Gregory Nutt
c35bb693a9 USB host CDC/ACM fixes. Still kind of buggy 2015-05-08 10:58:41 -06:00
Gregory Nutt
513344a084 Fix some missing quotes in a Kconfig file 2015-05-08 08:32:50 -06:00
Gregory Nutt
947fd7a5af USB host CDC/ACM: Improve RX responsiveness 2015-05-07 11:27:51 -06:00
Gregory Nutt
214aeeff57 USB host CDC/ACM: Add a bulk-only mode mostly for test, fix two bad assertions. Correct some loop termination logic in RX data receipt 2015-05-07 11:16:03 -06:00
Gregory Nutt
53bb938f23 Misc improvements to the CDC/ACM host driver, mostly related to parsing the configuration descriptor. Still does not work. 2015-05-07 10:02:51 -06:00
Gregory Nutt
691d7c9819 Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected. 2015-05-06 14:11:29 -06:00
Gregory Nutt
737fd7dcec drivers/usbhost: Add initial implementatino of a host-side CDC/ACM driver. Completely untested on initial commit (2015-05-06). 2015-05-06 12:49:00 -06:00
Gregory Nutt
4a8fbd8817 USB host: More fixes from last changes.. MSC block read and write must again return number of blocks on success. Fix numerous places where the assumption the ret == OK means success. Since the transfer method now returns the number of byte transfered, the correct test for success is ret >= 0 2015-05-05 15:48:48 -06:00
Gregory Nutt
9296eca193 USB Host function address calculation needs to reset the 'next' address when an address is released 2015-05-05 14:59:03 -06:00
Gregory Nutt
47a112974d USB host: Modify the transfer() and asynch() methods so that the actual size of the transfer is returned. Unverified on initial commit. 2015-05-05 13:14:22 -06:00
Gregory Nutt
81ab453f6a Fix a mistatement in a comment 2015-05-04 13:44:49 -06:00
Gregory Nutt
ea17bc3b68 USB hub class: Was not using the configured poll delay value 2015-05-04 13:44:12 -06:00
Gregory Nutt
e903259476 Hub: Use usleep instead of up_mdelay 2015-05-04 07:46:13 -06:00
Gregory Nutt
435d088182 SAMA5 EHCI: Mostly cosmetic 2015-05-03 08:51:44 -06:00
Gregory Nutt
c2a3f936aa USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port 2015-05-02 10:44:18 -06:00
Gregory Nutt
e4f538446b USB hub: Minor fix to reduce the amount of debug garbage on console in certain configurations 2015-04-30 13:03:28 -06:00
Gregory Nutt
1380945a13 USB hub: Add a configuration option to fallback to polling mode if the the HCD async method does not work. Don't call DRVR_CANCEL twice, and certainly not from the interrupt level. Add so checks so that we do not do some normal asynchronous actions if the hub has been disconnected 2015-04-30 11:30:01 -06:00
Gregory Nutt
b909ad04d8 USB HUB: Fix a deadlock that can occur if the HCD and the HUB try to share the high priority work queue. Now how work must be done on the low priority work queue. 2015-04-29 08:32:17 -06:00
Gregory Nutt
6e20a466ac Merge remote-tracking branch 'origin/master' into usbhub 2015-04-27 12:27:43 -06:00
Gregory Nutt
cec90e144a Another missing semicolon in a DEBUGASSERT statement 2015-04-27 12:26:40 -06:00
Gregory Nutt
d88d10830e USB host: Fix an attempt to take a semaphore from an interrupt handler 2015-04-26 10:05:15 -06:00
Gregory Nutt
397f31f061 Another hub-related interface change: Need to pass speed to EP0 2015-04-26 09:53:43 -06:00
Gregory Nutt
3bae38a2d9 USB HID mouse/keyboard: Fix a reference counting problem 2015-04-25 17:05:30 -06:00
Gregory Nutt
329ae78583 Fix a recently introduced deadlock in some class drivers 2015-04-25 15:57:57 -06:00
Gregory Nutt
4de9bc7b6c Trivial improvement of debug output 2015-04-25 14:52:36 -06:00
Gregory Nutt
e46cb394f9 Fixes some crashes when the hub is removed and/or reinserted 2015-04-25 12:16:22 -06:00
Gregory Nutt
38e0a4a1cb Fix a race condition when a mouse or keyboard device is removed from a hub 2015-04-25 11:17:57 -06:00
Gregory Nutt
e7792435c7 Add missing logic to destroy a class when the device is no longer connected to the hub port 2015-04-25 11:17:37 -06:00
Gregory Nutt
ed5287855f LPC17 USB host: Direction bit being set wrong from allocated control endpoints 2015-04-24 19:46:00 -06:00
Gregory Nutt
64fe226669 USB Hub: Cosmetic update to some naming 2015-04-24 18:32:09 -06:00
Gregory Nutt
becfe4ef9d HUB class must cancel any pending interrupt IN transfers before destroying the endpoint 2015-04-24 12:18:25 -06:00
Gregory Nutt
2768f13153 USB hub: Fixes for some port status change handling 2015-04-24 09:57:59 -06:00
Gregory Nutt
c9da86b4f0 Merge remote-tracking branch 'origin/master' into usbhub 2015-04-24 07:55:02 -06:00
Gregory Nutt
8ab4ea531e Update README 2015-04-24 07:48:53 -06:00
Gregory Nutt
a8a3790139 RA8875 LCD driver contributed by Marten Svanfeldt 2015-04-24 07:46:03 -06:00
Gregory Nutt
2586bc3fcc USB hub fixes. Mostly dealing with setting the hub function address at the right time and powering up downstream ports 2015-04-23 16:42:53 -06:00
Gregory Nutt
9752e12b11 USB HUB: Fix bugs, stray ampersand. Need to perfrom class destruction on the worker thread 2015-04-23 13:56:38 -06:00
Gregory Nutt
34e4edfd1a USB hub: Fix some port power enable logic 2015-04-23 11:24:05 -06:00
Gregory Nutt
adb50640c0 Correct errors in hub class destructor logic 2015-04-23 10:07:53 -06:00
Gregory Nutt
ab17603ceb Fix USB hub bugs: Don't allocate port EP0 until needed, otherwise run out of endpoints; using wrong pointer to access child endpoint array in a few places 2015-04-23 09:42:58 -06:00
Gregory Nutt
167f406050 Merge remote-tracking branch 'origin/master' into usbhub 2015-04-23 07:29:54 -06:00
Gregory Nutt
da04b29a68 Yet another missing semicolon on DEBUGASSERT 2015-04-23 07:29:15 -06:00
Gregory Nutt
64496a635c USB hub: Add some hub-related configuration settings 2015-04-22 17:16:35 -06:00
Gregory Nutt
f7ec9b0831 USB hub: Change to connection interface so that applications can deal with external hubs 2015-04-22 12:28:19 -06:00
Gregory Nutt
5c16454cdf Add USB hub initialization logic to a couple of board configurations 2015-04-21 13:44:14 -06:00
Gregory Nutt
fde0bf650e USB host: Integrate logic to assign device function address 2015-04-21 12:17:49 -06:00
Gregory Nutt
d6b963a62e USB host: Update skeleton driver file 2015-04-21 09:54:11 -06:00
Gregory Nutt
d62aa8c158 USB host: Remove getdevinfo() method. Rename hub structure to hubport structure. Get port and function address from hub port structure vs. parameters and other structures. 2015-04-21 07:26:28 -06:00
Gregory Nutt
2ea7a83bf5 USB hub: Move port index out of hub structure and into class structure 2015-04-20 16:50:32 -06:00
Gregory Nutt
4aeb5e549c Get USB host HID mouse driver to build. Error connect method prototypes. 2015-04-20 16:21:13 -06:00
Gregory Nutt
f7f3a7f74d USB hub: Decouple class and hub structures 2015-04-20 12:06:47 -06:00
Gregory Nutt
356292b60e Some trivial USB-related changes 2015-04-20 09:51:58 -06:00
Gregory Nutt
fa778aec07 USB hub: Add EP0 to all control transfers. There can be multiple EP0's with a hub 2015-04-20 09:35:43 -06:00
Gregory Nutt
9e0b239c37 Clean compile errors from last commit 2015-04-20 08:53:21 -06:00
Gregory Nutt
8e23ad72b5 USB hub: Add asych HCD interface 2015-04-20 08:41:33 -06:00
Gregory Nutt
0a014e0364 USB host: Cosmetic changes 2015-04-20 07:46:05 -06:00
Gregory Nutt
a6d9f0622c USB hub: First steps to make interfaces backward compatible 2015-04-20 07:45:11 -06:00
Gregory Nutt
8c1c365ae7 Reorder structure members for better packing 2015-04-19 15:58:09 -06:00
Gregory Nutt
8a23c52650 USB Hub: Change an the usbhost_ctrlxfer interface; move some functions around 2015-04-19 14:26:17 -06:00
Gregory Nutt
820bc08c34 USB Hub: Fix a few compilation errors 2015-04-19 12:01:47 -06:00
Gregory Nutt
1971ea3d4e Clean up some debug output 2015-04-19 11:24:06 -06:00
Gregory Nutt
de182f2a3a Merge remote-tracking branch 'origin/master' into usbhub 
Conflicts:
	nuttx/include/nuttx/usb/usbhost.h
 2015-04-19 10:55:20 -06:00
Gregory Nutt
7fcfca40b5 Bring in more logic from https://github.com/kaushalparikh/nuttx 2015-04-19 08:55:48 -06:00
Gregory Nutt
6bd7cfa823 Bring in USB hub-related files from https://github.com/kaushalparikh/nuttx. This is the work of Kaushal Parikh. This initial commit is incomplete. This is quite a bit more hub logic that needs to come in before the port is complete. 2015-04-18 16:20:02 -06:00
Gregory Nutt
726dadffb4 Add CONFIG_CDCACM_IFLOWCONTROL. Just hooks for now 2015-04-16 12:24:56 -06:00
Gregory Nutt
7bf9be7c33 Add hooks to CDC/ACM driver to support RX flow control 2015-04-16 09:11:51 -06:00
Gregory Nutt
a0866c0753 drivers/input/max11802.c: Fix possible unmatched IRQ restore. Noted by Juha Niskanen 2015-04-14 07:22:02 -06:00
Gregory Nutt
2aa80e06f5 Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
Gregory Nutt
e4d2822af8 Make some file section headers more consistent with standard 2015-04-08 07:15:32 -06:00
Gregory Nutt
bf7b5746a5 Correct typos in comments 2015-04-03 08:01:39 -06:00
Gregory Nutt
e9e386ac6e Add ILI9488 header file 2015-04-03 07:12:11 -06:00
Gregory Nutt
e78e762dd6 Add a very basic driver for the CS2100-CP Fractional-N Multipler chip. 2015-04-02 13:00:10 -06:00
Gregory Nutt
0ec67181c9 Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/. 2015-04-01 12:37:44 -06:00
Gregory Nutt
312ae5713e PIC32MZ Ethernet: Add support for LAN8740A PHY 2015-03-29 07:05:30 -06:00
Gregory Nutt
469827640b Add support for LAN8740 2015-03-23 15:34:10 -06:00
Gregory Nutt
495f420978 Extend the AT24 EEPROM driver so that it supports: (1) the byte-oriented read() method, (2) parts with extended memory regions, and (3) parts with 8-bit addressing. 2015-03-17 14:27:27 -06:00
Gregory Nutt
32aadd9cc2 SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling 2015-03-16 13:51:37 -06:00
Gregory Nutt
8783526a5f Fix some bad logic when file system debug is turned on: Arguments to syslog were missing so that garbage was being printed. 2015-03-15 09:34:07 -06:00
Gregory Nutt
b83cea4f99 Back out 70cb75adaf3243478276cebf367c5f47c4725715 2015-03-13 10:40:09 -06:00
Gregory Nutt
c5953bd0e9 Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf 
and this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf) shows that ACMD23
must be preceeded with CMD55 command as any other ACMD commands.

Also, after the block reading wait loop must be inserted before writing the next block of data to
the sd card

From Dmitry Nikolaev via Jussi Kivilinna
 2015-03-13 07:26:16 -06:00
Gregory Nutt
3473bb1635 drivers/serial: Report correct number of bytes free in serial buffer with FIONWRITE. From Jussi Kivilinna. 2015-03-13 07:22:43 -06:00
Gregory Nutt
0a939ff218 Pipes: Fix zero-lenth writes. From Jussi Kivilinna 2015-03-13 07:21:06 -06:00
Gregory Nutt
dba41a7048 chdev_driver: Avoid NULL pointer dereference when bch->refs == 255. From Juha Niskanen 2015-03-12 07:58:36 -06:00
Gregory Nutt
26b9b5a252 usbdev: usbmsc_scsi: Add NULL pointer check. From Juha Niskanen 2015-03-12 07:55:53 -06:00
Gregory Nutt
21d6e41032 Add TUN device. From Max Neklyudov 2015-03-11 06:52:56 -06:00
Gregory Nutt
b5bfb6762d Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes 2015-03-05 08:08:11 -06:00
Gregory Nutt
e41d78e848 Add missing CONFIG_SPI_CALLBACK selection to the drivers/spi/Kconfig. Noted by Freddie Chopin 2015-03-04 07:23:46 -06:00
Gregory Nutt
82251ccf28 Cosmetic updates from code review 2015-03-04 06:51:56 -06:00
Gregory Nutt
fada63014d Review and bring closer to nuttx coding style 2015-03-02 10:18:25 -06:00
Gregory Nutt
e2e7c791c1 Refreshed Spark Configurations 2015-02-28 15:44:58 -06:00
Gregory Nutt
6cc74fecc8 Refresh configuration 2015-02-25 07:22:58 -06:00
Gregory Nutt
1c4863c24e Trivial update to some comments 2015-02-24 06:41:28 -06:00
Gregory Nutt
4320b1b1a3 CAN driver: Another Ooops... Cannot save the updated driver open count if the we fail to initialize the CAN driver, causing the open to fail 2015-02-23 20:14:39 -06:00
Gregory Nutt
f4a2ebc220 CAN driver: Oop. unlink method does not exist if there operaions on the pseudo filesystem are disabled 2015-02-23 19:49:19 -06:00
Gregory Nutt
ebe289725b in nuttx/drivers/can.c can_open function: 
this line "dev->cd_ocount = tmp;" needs to be moved a few lines down otherwise the open count will only be incremented from 0 to 1. This causes problems when trying to open the can bus from two different tasks.

SourceForge Patch #46 from Anonymous
 2015-02-23 19:28:52 -06:00
Gregory Nutt
63ab39b274 VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled. 2015-02-18 09:34:58 -06:00
Gregory Nutt
e2336a07bb The RTC ioctl() method is now a configuration option 2015-02-18 08:23:10 -06:00
Gregory Nutt
f94e601981 Add an IOCTL method to the RTC interface 2015-02-18 08:05:31 -06:00