Gregory Nutt
|
f96c6793b9
|
Add SAMA5 HSMC register definitions and logic to reconfigure the NOR FLASH
|
2013-07-29 10:56:21 -06:00 |
|
Gregory Nutt
|
4ba648aaae
|
SAMA5: Add file structure to support board-specific initialization of NOR flash
|
2013-07-29 07:41:53 -06:00 |
|
Gregory Nutt
|
9a94a3707c
|
SAMA5: The ostest configuration have been converted to run out of NOR flash. There is more to be done, however
|
2013-07-28 15:07:35 -06:00 |
|
Gregory Nutt
|
7dc8dd4b50
|
SAMA5: Correct a clock configuration bug; clarify some MMU memory types
|
2013-07-28 12:44:06 -06:00 |
|
Gregory Nutt
|
dc92037e67
|
Add a hello world configuration to help with the SAMA5 bringup
|
2013-07-26 15:28:01 -06:00 |
|
Gregory Nutt
|
70f0ffdfc5
|
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
|
2013-07-26 10:09:17 -06:00 |
|
Gregory Nutt
|
55df28dbcf
|
Fix an uninitialized register error that crept into the ARM9 start up code many years ago and was recently cloned into the Cortex-A5. Obviously no on has used NuttX with ARM9 for years
|
2013-07-24 20:12:04 -06:00 |
|
Gregory Nutt
|
77e1c27005
|
Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons
|
2013-07-24 12:27:12 -06:00 |
|
Gregory Nutt
|
04b3bb1826
|
Revamp the way external memory regions are configured; Add logic to add SAMA5 external memory regions to the heap
|
2013-07-24 10:08:32 -06:00 |
|
Gregory Nutt
|
535048a73c
|
Improve some ARMv7-A/M floating point register save time; Add floating point register save logic for ARMv7-A
|
2013-07-23 17:52:06 -06:00 |
|
Gregory Nutt
|
812bf02972
|
ARMv7-A: Need 8-byte stack alignment when callign C code from interrupt handlers. This change needs to be ported to other ARM architectures as well
|
2013-07-23 14:47:16 -06:00 |
|
Gregory Nutt
|
14df812735
|
SAMA5: Adapt clocking for different boot modes. New header files for AXI matrix, BSC, and SFR
|
2013-07-23 13:54:49 -06:00 |
|
Gregory Nutt
|
afdd6320ee
|
Add SAMA5D3 pin multiplexing definitions
|
2013-07-23 09:47:01 -06:00 |
|
Gregory Nutt
|
f07d09aa48
|
Add SAMA5 GPIO configuration support
|
2013-07-22 20:59:47 -06:00 |
|
Gregory Nutt
|
339a55f1ea
|
Add support SAMA5 UART and serial driver
|
2013-07-22 19:16:37 -06:00 |
|
Gregory Nutt
|
e67d610347
|
SAMA5 clock configuration should now agree with Atmel sample code; Added header file with macros to enable and disable peripheral clocking
|
2013-07-22 17:00:02 -06:00 |
|
Gregory Nutt
|
a9b0f304e6
|
Add SAMA5 clock logic. Cloned from SAM3U and not yet verified
|
2013-07-22 14:42:05 -06:00 |
|
Gregory Nutt
|
1350b2a576
|
SAMA5 interrupt handling logic
|
2013-07-22 11:54:39 -06:00 |
|
Gregory Nutt
|
87f54f7d0b
|
Add system timer logic for the SAMA5
|
2013-07-21 15:49:17 -06:00 |
|
Gregory Nutt
|
543b5b7e03
|
A few more Cortex-A5 and SAMA5 files
|
2013-07-21 12:52:38 -06:00 |
|
Gregory Nutt
|
66259bfc53
|
Misc Cortex-A5 changes include new file for cache operations
|
2013-07-20 13:06:00 -06:00 |
|
Gregory Nutt
|
4a81d47c86
|
Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular
|
2013-07-19 15:23:03 -06:00 |
|
Gregory Nutt
|
8f2ad7eec1
|
Some initial frame for Cortex-A5 support. No much yet
|
2013-07-18 15:20:47 -06:00 |
|
Gregory Nutt
|
c960273afd
|
Build/test framework for the Zmodem sz and rz commands which are on their way
|
2013-07-12 16:01:37 -06:00 |
|
Gregory Nutt
|
352c313fa7
|
Fix typo/compilation error with USB device DMA memory allocation is enabled
|
2013-07-12 07:09:24 -06:00 |
|
Gregory Nutt
|
c6b141d190
|
Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao
|
2013-07-09 07:59:28 -06:00 |
|
Gregory Nutt
|
7536b4654b
|
Ticket #16: STM32 OTG FS device driver endpoint allocation. From Chia Cheng Tsao
|
2013-07-08 08:55:05 -06:00 |
|
Gregory Nutt
|
4d8a4b69a4
|
Add CRC16 support
|
2013-07-07 17:35:35 -06:00 |
|
Gregory Nutt
|
25c393f371
|
prohibit re-entrance into sam_configgpio()
|
2013-07-05 17:15:54 -06:00 |
|
Gregory Nutt
|
37ed44a1ee
|
Fix type in the USB composite device driver
|
2013-07-04 07:47:32 -06:00 |
|
Gregory Nutt
|
94e2f4ceb4
|
Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver
|
2013-07-03 08:12:45 -06:00 |
|
Gregory Nutt
|
e1dab23711
|
Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield
|
2013-07-01 16:50:16 -06:00 |
|
Gregory Nutt
|
8b68ea2f94
|
Add a general bit-bang SPI upper-half driver
|
2013-07-01 12:23:26 -06:00 |
|
Gregory Nutt
|
09faaccc02
|
Created new directories to hold SPI-related files
|
2013-07-01 08:11:54 -06:00 |
|
Gregory Nutt
|
8ba8ad39f9
|
SAM3U-EK touchscreen is now functional; created an NxWM configuration to test it further
|
2013-06-28 17:07:58 -06:00 |
|
Gregory Nutt
|
2ba00060bc
|
SAM33/4: Need to disable write protection before modify PIO pin configuration
|
2013-06-28 15:34:51 -06:00 |
|
Gregory Nutt
|
3505ca7556
|
Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general
|
2013-06-28 14:32:08 -06:00 |
|
Gregory Nutt
|
e0310e2cc8
|
Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system
|
2013-06-27 14:24:27 -06:00 |
|
Gregory Nutt
|
bc7ac20616
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
|
Gregory Nutt
|
d4b7efb34e
|
Add SAM3X/3A pin multiplexing and GPIO encoding header files
|
2013-06-26 17:02:43 -06:00 |
|
Gregory Nutt
|
f668abaed1
|
Add SAM3X/3A memory map
|
2013-06-26 14:37:57 -06:00 |
|
Gregory Nutt
|
3692dfaf26
|
Add SAM3X/3A peripheral clock controls
|
2013-06-26 14:00:26 -06:00 |
|
Gregory Nutt
|
b089263e1c
|
Add SAM3X/3A interrupt vectors
|
2013-06-26 12:59:56 -06:00 |
|
Gregory Nutt
|
18240b07b6
|
Add support for SAM3X and 3A chips, interrupts, and peripheral IDs
|
2013-06-26 12:28:32 -06:00 |
|
Gregory Nutt
|
450862a944
|
Add support fo SAM4S Xplained SRAM
|
2013-06-26 10:57:25 -06:00 |
|
Gregory Nutt
|
3d1f29217e
|
Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory
|
2013-06-25 09:13:30 -06:00 |
|
Gregory Nutt
|
3d975e0a08
|
Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes
|
2013-06-24 12:37:02 -06:00 |
|
Gregory Nutt
|
d11050e978
|
Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED.
|
2013-06-23 14:39:56 -06:00 |
|
Gregory Nutt
|
8959fffedc
|
SAM4L Xplained SLCD driver is complete
|
2013-06-23 09:05:20 -06:00 |
|
Gregory Nutt
|
d7ec0089a7
|
Fix for ENC28J60 from Dave
|
2013-06-22 08:55:16 -06:00 |
|