Commit Graph

1009 Commits

Author SHA1 Message Date
Gregory Nutt
dcd50db5d1 Run files in previous commit through nxstyle, fixing issues. 2020-04-26 22:14:25 +01:00
Gregory Nutt
a0fdda698c arch/z80: Fix z80 file naming
Modify file naming to conform on the Naming conventions of https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ

This commit only address the file naming convention.  There is still nonconformant function naming.
2020-04-26 22:14:25 +01:00
liuhaitao
459ad99373 Use EXTRAFLAGS instead of EXTRADEFINES to be used by make via command line
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.

Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-11 08:31:08 -06:00
ligd
231ad202ee global change: repace sched_xfree() to kxmm_free()
Changes:
sched_xfree() => kxmm_free()
remove garbage related APIs
remove ARCH_HAVE_GARBAGE

Cause garbage feature move to mm_heap, then don't need
garbage anymore.

Change-Id: If310790a3208155ca8ab319e8d038cb6ff92c518
Signed-off-by: ligd <liguiding@fishsemi.com>
2020-04-09 10:29:28 -06:00
Nathan Hartman
679b4fbee2 arch: Fix included directed -> included directly
This typo had been copied and pasted into numerous irq and syscall
headers.
2020-04-05 22:31:15 +01:00
Gregory Nutt
fc467021cf Check return from nxsem_wait_initialize()
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution:  Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly.  This commit is for all I2C drivers under arch/.
2020-04-02 00:46:06 +01:00
YAMAMOTO Takashi
1ffa009c8b Revert "Don't generate .depend anymore"
This reverts commit 79af7fbf4e.

Because:

* btashton reported some issues in local builds:

  https://github.com/apache/incubator-nuttx/pull/603#issuecomment-602264860

* this might be related to the current CI breakage:

  > /bin/sh: 1: /__w/incubator-nuttx/incubator-nuttx/nuttx/tools/mkdeps: not found
2020-03-22 23:07:29 -05:00
Xiang Xiao
79af7fbf4e
Don't generate .depend anymore 2020-03-22 18:15:29 +00:00
Nathan Hartman
a5e643b0cd Fix typos in comments and documentation. 2020-03-16 20:01:11 -06:00
Gregory Nutt
bfc15a6295 z20x: Fixes related to W25 boot configurations.
arch/z80/src/ez80/ez80_timerisr.c:  Correct a mismatch between the programmed reload value and the timer input clock frequency.

arch/z80/src/ez80/ez80f92.h:  Correct error in timer input clock divider:  Bits 2-3, not bits 3-4.

boards/z80/ez80/z20x/src/w25_main.c:  Correct an uninitialized return value; private function was not declard static.
2020-03-11 18:24:43 -03:00
Gregory Nutt
2c8d876ab8 eZ80F92: Eliminate Spurious Interrupts
arch/z80/src/ez80/ez80f92_init.asm:  Timer control register was not being cleared and, as a result, timer interrupts may have been already enabled when the CPU was started by the debugger.  This would result in spurious interrupts and Unexpected Interrupt crashes.

arch/z80/src/comming/up_initialize.c:  Fix a trivial typo.

While we are at it, change the license headers in all relevant files in the affected directories to the Apache 2.0 license.  Run all affected files through nxstyle.
2020-03-10 23:44:23 +01:00
Gregory Nutt
199b4d6852 z20x: Changes to reduce serial Rx data overrun
boards/z80/ez80/z20x:  Increase RX buffer size to 4Kb, reduce BAUD to 2400 in w25boot configuration
arch/z80/src/ez80/ez80_serial.c:  Reduce Rx FIFO trigger level for eZ80F92 to 1 so that will respond more quickly to incoming data.
2020-03-09 22:51:54 +01:00
Petro Karashchenko
3fa6baec98 spi: change spi_send() interface to support of 32-bit word transfer
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2020-03-09 08:03:35 -06:00
Gregory Nutt
4ae9ae9693 z80x: W25 Bootloader Improvements
boards/z80/ez80/z20x/src/w25_main.c:  Improve user interface.

There is still an error occurring while downloading Intex HEX files to FLASH.  That is unrelated to this and appears to be a problem libs/libc/hex2gbin/lib_hex2bin.c
2020-03-08 23:33:04 +01:00
Gregory Nutt
faca2f220e z20x: Timer/Spi Fixes
arch/z80/src/ez80/ez80_timerisr.c:  Fix an error that looks the file got damaged by a bad keystroke in the editor while a string was highlighted.
boards/z80/ez80/z20x/src/ez80_spi.c:  Fix some bad conditional compilationi. Prevented W25 chip select from being initialized.
2020-03-07 17:30:02 +01:00
Gregory Nutt
78563d555a arch/z80/src/ez80/ez80_spi.c: Correct oversight in previous commit
Commit 797e45d6bf attempted to reduce the frequency of SPI reconfiguration by keeping track of the current frequency and mode settings and changing these settings only when the new settings differ from the old settings.

However, the original commit neglected to save the new frequency setting and, hence, was not effective in what it was trying to do:  Every time the SPI setfrequency() method was called, it still looked like a new frequency and the frequency was still reconfigured, even though it hadn't really changed.
2020-03-07 09:59:23 +01:00
Gregory Nutt
797e45d6bf z20x: SPI and timer fixes
arch/z80/src/ez80/ez80_spi.c:  Add logic checks to eliminate unnecessary SPI reconfiguration.
arch/z80/src/ez80/ez80_timerisr.c and arch/z80/src/ez80/ez80f92.h:  Fix numerous places where configurations began with CONFIGS_ instead of CONFIG_
2020-03-06 23:28:35 +01:00
Gregory Nutt
ee9949a724 z20x: Fix some SPI/W25/Timer issues.
arch/z80/src/ez80/ez80_spi.c:  Do not configure SPI chip select pin.  It is not used by the driver and configuring it just clobbers other usage of that pin.  Add some additional debug outputs; correct some exiting debug outputs.

drivers/mtd/w25.c:  Add some debug output.

boards/z80/ez80/z20x/src/ez80_w25.c:  Correct SPI bus number used in initialization.  Only SPI1 is supported.

arch/z80/src/ez80/ez80_timerisr.c:  Some initial timer configuration fixes.
2020-03-06 21:09:14 +01:00
Gregory Nutt
859d694c78 z20x: Correct RAM wait states. 2020-03-05 17:49:58 -03:00
Gregory Nutt
de07abe632 ez80f92: Interrupt improvements.
arch/z80/: include/ez80/irq.h, src/ez80/ez80f92_*.asm:  Correct some comments related to vector address offsets.
boards/z80/ez80/z20x/scripts/z20x_loader.linkcmd:  Fix RAM offset in linker script
2020-03-05 18:54:24 +01:00
Gregory Nutt
2eff5a6c63 z20X: Continued development of the W25 Bootloader.
Kconfig files.  Repartition some functionality.  Bootloader support will need to be provided in logic under arch/z80/src/ez80 so the critical configuration selections were moved the Kconfig file there.

arch/z80/src/ez80/ez80_i2c.h:  Rename arch/z80/src/ez80/ez80f91_i2c.h.  It is sharable by both ez80f91 and ez80f92.

arch/z80/src/ez80/:  Add logic to perform an additional level of interrupt redirection.  This is necessary because the the interrupt handling is part of the loader FLASH-based logic.  In order to share interrupts with the program loaded into RAM by the loader, another layer or redirection is required to get control to the interrupt handlers in the loaded program.  See ez809f2_loader.asm and ez80f92_program.asm

boards/z80/ez80/z20x/scripts:  Reduce size of the interrupt re-direction buffer from 1Kb to 512b.
2020-03-03 19:39:57 -03:00
Juha Niskanen
f3490e42c3 Fix typos in comments 2020-03-03 09:11:57 -06:00
Gregory Nutt
e814977c0f boards/z80/ez80/z20x/: Add W25 bootloader
The SD boot loader was not satisfactory because 1) the SD slot is on an optional board and, hence, cannot be part of a fundamental solution.  And 2) it is too big.

The only storage on borard is the Winbond W25 SPI-bsed FLASH.  This commit adds support for a bootload to 1) read code in HEX format from a serial port and write it to the W25 FLASH, or 2) read code in binary form from the W25 FLASH into SRAM and execute the loaded program.

boards/z80/ez80/z20x/configs:  Added w25boot configuration
boards/z80/ez80/z20x/src:  Add bootloader logic, w25_main.c.  Add logic to manage shared SRAM memory map so that the loaded program does not clobber the bootloader memory.  Add logic to recover the bootloader memory into the heap after the loaded program as started.
boards/z80/ez80/z20x/scripts:  Rework scripts and configuration to support a bootloader and program build.  The boolloader cannot use all of SRAM; the program must not clobber the SRAM region used by the bootloader.
2020-03-02 14:05:09 -03:00
Gregory Nutt
41ef33bded eZ80: Fix optimization issues
board/z80/ez80/*/scripts/Make.defs:  Fix optimization definition use in assembly flags.  It was using the compiler optimization settings instead of the assembler optimization settings.  Hence, enabling optimization would could cause assembler command line errors.

arch/z80/src/ez80/Toolchain.defs:  Back out some work arounds.  Now compiler optimization flags can again set set without assembler command line errors.

boards/z80/ez80/z20x/README.txt:  Trivial update to size/optimization discussion.
2020-02-29 12:43:28 -03:00
Gregory Nutt
8c00e43c1a arch/z80/src/ez80: Fix eZ80F92 Interrupt Controller
The eZ80F92 interrupt controller is very different from the eZ80F91.  The eZ80F91 has:

1. Four byte interrupt vectors
2. The vector base address register is 16-bit so the vector table can lie in RAM

Whereas the eZ80F92 has:

1. Two byte interrupt vectors
2. An 8-bit vector base address

This means that the vectors must lie in the first 16-bits of FLASH and there must be a "trampoline" to get to interrupt handlers outside of the first 64-Kb of FLASH.
2020-02-28 19:45:28 +00:00
Gregory Nutt
161104c76a eZ80/z20x: Correct uninitialized stack memory
arch/z80/src/ez80/Toolchain.defs:  Correct some CFLAGS when optimization suppressed.

arch/z80/src/ez80/Kconfig arch/z80/src/ez80/ez80_emac.c:  Remove configuration option for selecting EMAC RAM address.  This is duplicated and possibly conflicting.  The correct address for the RAM is provided in the linker command file.  The RAM should be configured once and using this single definitions.

arch/z80/src/ez80/ez80_startup.asm and arch/z80/src/ez80/ez80f9*_init.asm.  Move RAM and FLAH intialization out of MCU-specific logic to common start-up logic.  We cannot call any functions until SRAM is initialized and the stack is properly initialized because the return address is stored on the stack.  Use internal SRAM for the IDLE stack to avoid the chicken'n'egg problem.

boards/z80/ez80/z20x/configs/sdboot/sdboot.zdsproj:  Discuss build environments.
2020-02-27 22:53:27 +01:00
Gregory Nutt
1521037083 arch/z80/src/Makefile.zdsii*: Correct libraries for eZ80F92
These makefiles set the the ZiLOG runtime libraries for the eZ80 parts.  The setup was, however, conditioned on CONFIG_ARCH_EZ80_EZ80F91 and, so, was not working for the eZ80F92 part (CONFIG_ARCH_EZ80_EZ80F92).

With this change, the z20x board FINALLY builds and links correctly with no errors.
2020-02-26 21:08:20 +00:00
Gregory Nutt
fa5179a51a arch/z80/src/ez80/ez80f92_handlers.asm: Trivial typo fix. 2020-02-26 21:08:20 +00:00
Gregory Nutt
fcee2f5a53 arch/z80/src/ez80/ez80_timerisr.c: Use Kconfig MCU configurations.
Don't use MCU selection from compiler.  It appears that we must compile ez80f92 code as ez80f91 so the comiler MCU selection is incorrect.  Instead, use the selected CPU part from the configuration.
2020-02-26 21:08:20 +00:00
Gregory Nutt
b63024dc7b arch/z80: Make MCU selection menus more like other archs 2020-02-26 21:08:15 +00:00
Gregory Nutt
a9610e16bd boards/z80/ez80/z20x: Update CFLAGS and linker scripts.
arch/z80/src/ez80/Toolchain.defs:  Update some CFLAGS to match CFLAGS from ZDS-II IDE.  Apparently, we must say that the CPU is an eZ80F91 event when compiler for eZ80F92.
boards/z80/ez80/z20x:  Update linker scripts.
2020-02-26 21:12:01 +01:00
Gregory Nutt
e6f545beab Extend revised ZDS-II support to z8 and z16f
* tools/zds/zds_Config.mk: Move  boards/z80/ez80/scripts/eZ80_Config.mk to tools/zds/zds_Config.mk where it can be shared by other ZDS-II platforms.
* boards/z16/z16f:  Duplicate changes for new ZDS-II support from ez80
* boards/z80/z8:  Duplicate changes for new ZDS-II support from ez80
* arch/z16/src/z16f/Toolchain.defs:  Create required Toolchain.defs file for Z16f
2020-02-24 22:37:28 +01:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Xiang Xiao
bd4e8e19d3 Run codespell -w against all files
and fix the wrong correction
2020-02-22 14:45:07 -06:00
Gregory Nutt
7516f76422 boards/z80/ez80: More consolidation of build files.
arch/z80/arc/ez80/Toolchain.sh:  Move more common toolchain definitions from Make.defs.
boards/z80/ez80/scripts/eZ80_Config.mk:  Move common defines that override tools/Config.mk to this new file.

This does not solve the ez80 build problem yet but does assure that when the solution is in place, it will automatically apply to all present and future ez80 configurations.
2020-02-21 16:45:13 +01:00
Gregory Nutt
231720d330 boards/z80/ez80: Consolidate toolchain path definitions 2020-02-21 02:17:35 +00:00
Gregory Nutt
c015e42602 boards/z80/ez80: Update compiler support
boards/z80/ez80:  Update to latest ZDS-II verstion 5.3.3 compiler
arch/z80/src/ez80:  Fix some regressions on ez80f91 build due to ez80f92
changes.
2020-02-20 08:18:39 -06:00
Gregory Nutt
90839b41f9 Revert some changes from a previous PR
I was over-zealous in arch/z80/src/ez80/ez80f91_handlers.asm.  I added space separatros around the '+' operators.  Turns out that the ZDS-II assembler can't handle the spaces in that context.
2020-02-20 01:05:28 +01:00
Gregory Nutt
b403bfecd5 arch/z80/src/ez80/ez80f92.h: Fix some bad copy-paste. 2020-02-20 00:25:19 +01:00
Gregory Nutt
647f2f44df Run arch files through nxstyle. 2020-02-20 00:03:48 +01:00
Gregory Nutt
77b4fa936b New files need Apache 2.0 license. 2020-02-20 00:03:48 +01:00
Gregory Nutt
2fca67c421 arch/z80/src/ez80 and include/ez80: Add ez80f92 support
The ez80f92 is similar to the currently supported ez80f91 except that is:

1. Has no PLL and has a maximum CPU frequency of only 20MHz
2. Has no Ethernet controller
3. Timers are different
4. Has no GPIO Port A
5. Timers are different
6. It comes in a smaller package

and other small differences.

This provided the architecture (only) support for the forthcoming z20x port.
2020-02-20 00:03:48 +01:00
Xiang Xiao
bff26dbe3a arch: Cleanup syslog_console_init usage
1. Remove the private declaration
2. Ensure nuttx/syslog/syslog_console.h gets included
3. Remove syslog_console.h inclusion if not really used
2020-02-18 13:06:53 -06:00
Xiang Xiao
51a2171c71 ramlog: Remove g_ramlog_syslog_channel since it's same as g_default_channel
And remove syslog_init_e because all initialization is later now and we don't
distinguish the initialition phase anymore after ramlog don't need special
initialize.
2020-02-18 13:04:45 -06:00
Xiang Xiao
dcaaf2d912 ramlog: Remove all ramlog_consoleinit related code
Because we can get the same function by CONSOLE_SYSLOG/syslog_console_init.
BTW, it isn't a good choice to use g_ramlogfops as /dev/console since nsh
will read back what it send out which will surprise most people.
2020-02-18 12:57:43 -06:00
Xiang Xiao
f982ee43db drivers/serial: Remove the lowconsole driver
Replace with the syslog console driver which has more capability than lowconsole
2020-02-18 12:51:09 -06:00
Xiang Xiao
ad97c044a7 arch/z80: Remove z80_lowserial_initialize()
Since nothings calls the function z80_lowerserial_initialize() at all
2020-02-18 12:45:57 -06:00
Xiang Xiao
6b77f73583 arch: Move iob_initialize into nx_start just after heap initialization
it doesn't make sense that iob initialization is in up_initialize
but other memory components initialization is called in nx_start

Change-Id: Id43aeaa995f340c5943f59a0067a483ff3ac34a2
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-18 10:26:19 -03:00
Xiang Xiao
e7d9260014 arch: Customize the typedef of size_t instead of intptr_t
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG.  The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
2020-02-18 07:15:19 -06:00
Xiang Xiao
6d69439f58 Call xxx_timer_initialize from clock subsystem
Call xxx_timer_initialize from clock subsystem to make timer ready for use as soon as possiblei and revert the workaround:

commit 0863e771a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Apr 26 07:24:57 2019 -0600

    Revert "sched/clock/clock_initialize.c:  clock_inittime() needs to be done with CONFIG_SCHED_TICKLESS and clock_initialize should skip clock_inittime() for external RTC case since the RTC isn't ready yet."

    This reverts commit 2bc709d4b9.

    Commit 2bc709d4b9 was intended to handle the case where up_timer_gettime may not start from zero case.  However, this change has the side-effect of breaking every implementation of tickless mode:  After this change the tickless timer structures are used before they are initialized in clock_inittime().  Initialization happens later when up_initialize is called() when arm_timer_initialize().

    Since the tickless mode timer is very special, one solution might be to

    1. Rename xxx_timer_initialize to up_timer_initialize
    2  Move up_timer_initialize to include/nuttx/arch.h
    3.  Call it from clock subsystem instead up_initialize

    Basically, this change make timer initialization almost same as rtc initialization(up_rtc_initialize).

    For now, however, we just need to revert the change.
2020-02-08 07:40:06 -06:00
Xiang Xiao
76bbed07a4 Call up_irqinitialize from irq subsystem
Call up_irqinitialize from irq subsystem to make the irq ready for use as soon as possible
2020-02-08 07:39:22 -06:00
Xiang Xiao
a8de37fbec Ensure all source code end with one and only one newline
by this command:
git ls-files -z | while IFS= read -rd '' f; do tail -c1 < "$f" | read -r _ || echo >> "$f"; done
2020-02-08 07:25:56 -06:00
Xiang Xiao
c5b1554d84 Remove NETDEV_LOOPBACK option, NET_LOOPBACK is enough 2020-02-02 08:25:06 -06:00
Xiang Xiao
5c80b94820 Replace #include <semaphore.h> to #include <nuttx/semaphore.h>
Since the kernel side should call nxsem_xxx instead and remove the unused inclusion
2020-02-01 08:27:30 -06:00
Xiang Xiao
80277d1630
Refine the preprocessor conditional guard style (#190) 2020-01-31 19:07:39 +01:00
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189)
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Xiang Xiao
1e3f457c9e Remove TIME_EXTENDED option to more conform C standard
Gregory Nutt <gnutt@nuttx.org>

    Run all .c and .h files modified in this PR through nxstyle and correct all coding standard problems.

Xiang Xiao <xiaoxiang@xiaomi.com>

    Remove TIME_EXTENDED option to more conform C standard

    Note: the code/data size increment is small
2020-01-23 08:17:22 -06:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Xiang Xiao
87cf5c58ae Correct some problems with network timed events when there are multiple network devices in the configuration.
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>

    Ran nxstyle against many of the affected files.  But this job was too big for today.  Many of the network drivers under arch are highly non-compiant and generate many, many faults from nxstyle.  Those will have to be visited again another day.

Author: Xiang Xiao <xiaoxiang@xiaomi.com>

    This effects all network drivers as well as timing related portions of net/: devif_poll_tcp_timer shouldn't be skipped in the multiple card case.  devif_timer will be called multiple time in one period if the multiple card exist, the elapsed time calculated for the first callback is right, but the flowing callback in the same period is wrong(very short) because the global variable g_polltimer is used in the calculation.  So let's pass the delay time to devif_timer and remove g_polltimer.
2019-12-24 10:37:30 -06:00
Xiang Xiao
800e12fc42 arch/: Add rpmsg_serialini() call to every implementation of up_initialize() for rpmsg uart initialization. 2019-11-04 08:11:50 -06:00
Xiang Xiao
3bc62f1ccc Change space to tab and help to ---help--- in Kconfig files. 2019-10-05 21:39:12 -06:00
Nathan Hartman
46aaec7ba0 Fix minor typos in docs and comments. 2019-09-29 12:52:20 -06:00
Juha Niskanen
ebc6f51641 Fix some typos 2019-09-17 10:46:23 -06:00
Nathan Hartman
366053e464 Fix typos, 1 in a #define, others in comments. This changes one definition: _MQ_TIMEDRECIEVE is changed to _MQ_TIMEDRECEIVE. It appears this symbol is not used anywhere. 2019-09-11 08:56:56 -06:00
Gregory Nutt
2730714774 Update more comments and README.txt files to reflect new organization of the boards/ sub-directory. 2019-08-08 09:17:04 -06:00
Gregory Nutt
240926c995 Beginning to update comments to reflect new organization of the boards/ sub-directory. 2019-08-08 08:46:54 -06:00
Gregory Nutt
615c0ea7ee Change naming configs/ to boards in comments, Documentation, etc. Still a few more to go. 2019-08-05 07:13:48 -06:00
Alin Jerpelea
a1c991d921 Merged in alinjerpelea/nuttx (pull request #963)
Move boards to boards folder

* boards: rename configs folder to boards

    This is the proposed layout after the change:

    boards: - folder containing board folders
            <board>: - name of each board
                    drivers: - extra drivers specific for platform
                    include: - header files for the boars
                    scripts: - extra scripts specific for platform
                        src: - board specific code
                      tools: - extra tools specific for platform
                    <config>: - board specific configuration(s)

    Note:
    <xxx> names are dependent on platform

    This is a logical change to aim to the arch layout but this is a
    huge change it should be done in several steps to lower the risk.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Kconfig: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Makefile.*: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* Make.defs: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .sh: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .mk: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .c & .h: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* .bat: replace configs with boards

    The change is needed after the path change

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 12:04:14 +00:00
Nathan Hartman
68d43d3679 Fix typos. 2019-08-04 14:50:28 -06:00
Gregory Nutt
a73cd667d9 configs/makerlisp: This commit brings in a new configuration to support execution entirely out of external SRAM.
Squashed commit of the following:

    configs/makerlisp/scripts/makerlisp_ram.linkcmd:  Fixup .RESET and .STARTUP.  These need to be redirected to RAM since they default to ROM.

    configs/makerlisp/scripts/makerlisp_ram.linkcmd:  Restore some settings that should be unnecessary but are really required by the current implementation.

    configs/makerlisp:  Rename nsh configuratinon to nsh_flash.  Create new configuration, nsh_ram, that is identical to the nsh_flash configuration except that the code runs out of external SRAM.

    configs/makerlisp/scripts:  Add a linker script to support execution from RAM.
2019-06-26 09:56:20 -06:00
Adam Porter
ac46dbbffd drivers/usbhost: Remove duplicate const in usbhost files. 2019-06-20 06:49:56 -06:00
Gregory Nutt
ad0181a6d4 arch/z80/src/ez80/ez80_spi.c: Fix a poorly constructed loop that would lead to hangs. 2019-06-18 09:28:13 -06:00
Gregory Nutt
4bfa6fe511 arch/z80/src/ez80: Correct setting of RTC time. 2019-06-18 08:32:31 -06:00
Gregory Nutt
4d78132c46 arch/z80/src/ez80: Fix a bad SPI register address definition. Clean up RTC lower half driver problems. Update a README. 2019-06-17 15:20:28 -06:00
Gregory Nutt
7aa8039179 Squashed commit of the following:
commit f5080f53516a853408dd80f09f85e1d1c139133f
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 12:24:22 2019 -0600

    arch/z80/src/ez80/ez80_spi.c:  SPI driver still does not work.  But the driver now has timeouts so that at least it does not hang the system on startup.

commit 5241e9ae643981c43c8c7fa8478a01d0c2e17eb0
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 10:45:11 2019 -0600

    arch/z80/src/ez80:  Fixes to SPI baud rate calculation.

commit ce2e9e3703485563a0a5b6a57e4080ad45d91fd7
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 09:29:13 2019 -0600

    arch/z80/src/ez80:  Cosmetic and unnecessary clean-up or serial driver.

commit 77287c8508a7e3262068d3e8cf1c5f8e27f3a144
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 09:08:56 2019 -0600

    arch/z80/src/common and arch/z80/src/ez80:  Clean up some assertion-related logic.

commit 4d2d3594c22f7240119255825fce2d2437301404
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:48:21 2019 -0600

    configs/makerlisp/nsh/defconfig:  Enable STACKDUMP on assertion.

commit 76b7a2faa3f213dd26634dd9440d12f746cac097
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:47:55 2019 -0600

    configs/makerlisp/include/board.h:  Don't put the board in reset on a simple assertion, onlhy a full panic.

commit 0a0dc12edcd39c07696769cb7249d8c39a148ccc
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:46:54 2019 -0600

    arch/z80/src/ez80/ez80_rtc_lowerhalf.c:  Remove all references to alarm ID.

commit 1a4dba1075fcf6466e87520a8ba66bbf91d696d7
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:33:29 2019 -0600

    configs/makerlisp/src/ez80_bringup.c:  Fix an error that was causing MMC/SD to fail to initialize.  Unfortunately now the system hangs.

commit 145a395c7a8e73336fe62caf803d108c59e306a5
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Mon Jun 17 07:32:50 2019 -0600

    arch/z80/src/ez80:  Add an RTC lower half driver.  Initial commit is just the STM32 RTC lower half with name changes.
2019-06-17 12:25:43 -06:00
Gregory Nutt
1fd6c432fc configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile. 2019-06-16 14:45:38 -06:00
Gregory Nutt
a02858365a arch/z80/src/ez80/ez80_vectors.asm: Fix a logic error in vector initialization 2019-06-16 11:48:29 -06:00
Gregory Nutt
7e05bacd54 configs/makerlisp: Update external memory settings in linker script. 2019-06-16 11:48:29 -06:00
Gregory Nutt
495a648573 arch/z80/src: Rename up_doirq.c and up_internal.h to z80_doirq.c and z80_internal.h for better consistency with the naming conventions 2019-06-09 19:08:42 -06:00
Gregory Nutt
0148124e33 Squashed commit of the following:
nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_mmuinit should be called z80_mmu_initialize.

    nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_loweserialinit should be called z80_lowserial_initialize.

    configs/z80sim/src/z80_serial.c:  Remove unused function up_earlyserialinit()

    nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_serialinit should be called z80_serial_initialize.

    nuttx/arch/z80/src:  To properly follow the coding standard, the z80 architecture common should up_doirq should be called z80_doirq.

    arch/z80/src/common:  up_addregion() must be prototyped in nuttx/mm/mm.h, not up_internal.h
2019-06-08 22:01:53 -06:00
Gregory Nutt
d39ac6c3a1 arch/z80/src/common: Fix some name of internal z80-family common functions. ez80_* is wrong. up_ is misleading. 2019-06-08 11:36:55 -06:00
Gregory Nutt
f5b890d098 Squashed commit of the following:
arch/z80/src/ez80:  Clean-up RTC driver; get a clean compilation.  Still untested.

    arch/z80/src/ez80:  This brings the RTC to code complete, but does not yet compile.

    arch/z80/src/ez80/ez80_rtc.c:  Bring in badly ported RTC driver from STM32F4.  Little more than naming changing at this point not even ready to attempt comilation

    arch/z80/src/ez80:  Add RTC driver.  Initial commit is just the STMF4 RTC driver with name changes.
2019-06-08 09:58:24 -06:00
Gregory Nutt
1f3958116a arch/z80/src/ez80/Make.defs: Fix some backward conditional loic 2019-06-07 13:23:54 -06:00
Gregory Nutt
fbb6f6cde0 configs/: Rename ZDS-II start files from xxx_lowinit.c to xxx_boot.c; rename board initialization logic from xxx_lowinit() to xxx_board_initialize(). These changes make the ZDS-II configurations more similar to board initialization conventions to used for other architectures. 2019-06-05 10:14:58 -06:00
Gregory Nutt
cf8268f7d8 configs/makerlisp/src/ez80_lowinit.c: Remove redundant SPI GPIO setup. This is already done in the SPI driver.
configs/makerlisp/src/ez80_spi.c:  Add hooks needed by SPI driver.  Move SPI MMC/SD chip selected configuration from ez80_lowinit.c to here as it done in other NuttX architectures.  This enables support for multiple devices on the SPI bus.
2019-06-05 08:20:00 -06:00
Gregory Nutt
4e98980045 Add initial support for the MakerLisp eZ80 board. Ref: https://makerlisp.com/
Squashed commit of the following:

    configs/makerlisp:  Update comments about use of serial console.

    configs/makerlisp:  Add LED support, remove vestiges of button support (the board has no user buttons).  Add support for SPI-based MMC/SD card slot.

    arch/z80/src/ez80:  Fix some link problems.

    libs/libc/syslog/lib_syslog.c:  The ZDS-II toolchain does not declare va_coy in stdarg.h.  I think that the use of va_copy in vsyslog() is no necessary.

    configs/makerlisp:  Initial configuration directories cloned from ez80f910200zco with little more than naming changes.
2019-06-04 11:12:17 -06:00
Gregory Nutt
4a7f0166cf arch/z80/src/ez80/ez80_i2c.c: Cosmetic changes from code review. Also makes I2C and SPI configurable options. 2019-06-04 06:49:45 -06:00
Gregory Nutt
6fbfd00396 arch/z80/src/ez80/ez80_spi.c: Cosmetic changes from code review. 2019-06-03 23:59:53 -06:00
Gregory Nutt
59f3180179 Re-verify ez80 build. Fixes to other ZiLOG architectures broke ez80 again. 2019-06-03 19:04:24 -06:00
Gregory Nutt
622c272ea3 Clean up some variouis compiler problems using SDCC to compiler Z180. 2019-06-03 18:16:23 -06:00
Gregory Nutt
7ab149d8e9 Various fixes to get a clean compile with the SDCC compiler. Compile is 'almost' clean. 2019-06-03 16:53:11 -06:00
Gregory Nutt
fd4436f559 arch/z80/src/Makefile.zdsiil: Minor cleanup 2019-06-03 15:35:36 -06:00
Gregory Nutt
27bb130bf8 arch/z80/src/: Fix a few more ez80 compile issues. Update README files. 2019-06-02 18:35:32 -06:00
Gregory Nutt
fc79fc5ce1 arch/z80/src: Fix ez80 compile problems due to New ZDS-II toolchain and ongoing bit rot due to non-C89 code creeping into the core OS. 2019-06-02 15:36:38 -06:00
Gregory Nutt
2767e80459 Squashed commit of the following:
ez80:  Fixing a few more compile problems.  I am afraid that the 5.3.0 compiler it too buggy to use.
    ez80:  Additional build-related fixed.
    eZ80:  Updating to use the newest ZDSII 5.3.0 toolchain.
2019-06-02 11:05:31 -06:00
Gregory Nutt
abf6965c24 Squashed commit of the following:
libs/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    syscall/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    wireless/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    Documentation/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    include/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    drivers/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    sched/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    configs:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/xtensa:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/z80:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/x86:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/renesas and arch/risc-v:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/or1k:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/misoc:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/mips:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/avr:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/arm:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
2019-04-29 14:52:05 -06:00
Gregory Nutt
b290160b3b Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly). 2019-03-20 19:27:40 -06:00
Gregory Nutt
a64869aa67 CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense.
Squashed commit of the following:

    configs/:  The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
    fs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    tools/:  Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
    syscall/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    libs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    include/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    drivers/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    Documentation/:  Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
    binfmt/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    arch/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    net/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/Kconfig:  CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
    configs/:  Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 12:09:26 -06:00
Gregory Nutt
a2e62f557d Squashed commit of the following:
sched/init/nx_bringup.c:  Fix a naming collision.
    sched/init:  Rename os_start() to nx_start()
    sched/init:  Rename os_smp* to nx_smp*
    sched/init:  Rename os_bringup to nx_bringup
    sched/init:  rename all internal static functions to begin with nx_ vs os_
2019-02-04 16:20:35 -06:00
Gregory Nutt
bb623d1e04 This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
Squashed commit of the following:

    Trivial, cosmetic
    sched/, arch/, and include:  Rename task_vforkstart() as nxtask_vforkstart()
    sched/, arch/, and include:  Rename task_vforkabort() as nxtask_vforkabort()
    sched/, arch/, and include:  Rename task_vforksetup() as nxtask_vfork_setup()
    sched/:  Rename notify_cancellation() as nxnotify_cancellation()
    sched/:  Rename task_recover() to nxtask_recover()
    sched/task, sched/pthread/, Documentation/:  Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
    sched/task:  Rename task_schedsetup() to nxtask_schedsetup()
    sched/ (plus some binfmt/, include/, and arch/):  Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
    arch/ and sched/:  Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
    sched/task:  Rename all internal, static, functions to begin with the nx prefix.
2019-02-04 13:42:51 -06:00
Gregory Nutt
b1001b4e50 Update TODO list regarding non-queuing of signal actions; Add comments in code at areas where the issue applies. 2019-02-04 08:35:03 -06:00
Gregory Nutt
1bbcd1ad96 Update some comments and cosmetic spacing. 2019-02-04 07:24:45 -06:00
Gregory Nutt
a77c073797 arch/: Fix an interlock that was broken by commit 641a98a434 in all implementations of up_sigdeliver. 2019-02-03 17:14:32 -06:00
Gregory Nutt
641a98a434 arch/: The saved return register state is available on the user stack. Thic commit reorders some logic so that certain, critical registers are preserved in the TCB. This does not make the logic 100% secure, but does prevent some obvious things. sched/signal/sig_delivery: Add a flag to the TCB to indicate that we are in a signal handler. Use this flag to assure that a there a never attempts to nest signal handling operations on a thread. This was guaranteed before but when locking of pre-emption during signal delivering was eliminated in a previous commit, there was a remote possibility of an attempt to do nested signal handling. This flag assures that there is only one signal handled at a time. 2019-02-03 15:29:47 -06:00
Xiang Xiao
818d8dda1e Remove empty seria.h and all references 2019-01-26 15:08:14 -06:00
ligd
5a6108c172 arch/xxx/src/common/up_initialize.c: Move up_pminitialize() after timer_initialize() 2019-01-26 07:32:14 -06:00
Gregory Nutt
ec9265aa95 arch assertions: Correct duplicated logic from commit dbf01d12b7. Checking for PID == zero is not a valid way to test for the IDLE task in all configurations! This is only true in the single CPU configuration. In multiple CPU configurations, there will be a separate IDLE task for each CPU with a different PID. 2018-12-18 17:35:42 -06:00
Gregory Nutt
0af39e1493 arch/: Update all _exit() implementations for all architectures so that they correctly called the scheduler instumentation layer for the new task that runs when the old one exits. This missing instrumentation was confusing the Critical Section Monitor logic with uses this instrumentation to track the state of critical sections. 2018-11-24 18:20:57 -06:00
Gregory Nutt
09f4dee6bc All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences. 2018-11-21 07:57:26 -06:00
Xiang Xiao
dbf01d12b7 Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch. 2018-11-15 07:11:51 -06:00
Xiang Xiao
543f4ed8ec arch/ all assertion functions: up_assert move the register dump to first make the more important info first 2018-11-11 12:53:59 -06:00
Xiang Xiao
dfe788be25 arch/ all assertion functinos: up_stackdump dump the full stack if stack overflow the stack info is very useful to find the backtrace 2018-11-11 12:52:36 -06:00
Xiang Xiao
e4106a3744 arch/ assertions files: up_registerdump capture the general register if not yet saved and up_saveusercontext is implemented, the register dump is very useful to find the cause of failure. 2018-11-11 12:50:50 -06:00
Gregory Nutt
2b3ec4172d arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. 2018-11-10 14:06:46 -06:00
Gregory Nutt
6d93658ff8 Add new configuratin CONFIG_NET_MCASTGROUP. This option is selected automatically if either CONFIG_NET_IGMP or CONFIG_NET_MLD are selected. Most conditional logic based on CONFIG_NET_IGMP replaced with conditioning on CONFIG_NET_MCASTGROUP. 2018-10-31 15:03:51 -06:00
Gregory Nutt
9bc951a335 Rename devif_loopback_out to devi_loopback 2018-08-25 08:33:21 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
0074afa0ac net/netdev: add devif_loopback_out() to check the loopback case where a packet is being sent to itself. Modify the net driver to call this function in this case. This function will simply re-inject the packet back into the network and the network driver will not put anything on the wire. 2018-08-24 09:21:33 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong. 2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
c2267a57a0 Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115. 2018-08-05 10:48:02 -06:00
Gregory Nutt
10069067c1 include/nuttx/i2c/i2c_master.h: Rename I2C_M_NORESTART to I2C_M_NOSTART since it may be used in other contexts than a repeated start. Add comments to clarilfy setup for repeated start. 2018-08-03 08:51:55 -06:00
Gregory Nutt
22cd0d47fa This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE.
This makes the user interface a little hostile.  People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header).  A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length.  Instead, we define the packet buffer size then derive the MTU.

The MTU is not common currency in networking.  On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP).  Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes.  So we should be all good and without the recurring 14 byte error in MTU's and MSS's.

Squashed commit of the following:

    Trivial update to fix some spacing issues.
    net/: Rename several macros containing _MTU to _PKTSIZE.
    net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE.  This is not the MTU which does not include the size of the link layer header.  This is the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename the file d_mtu in the network driver structure to d_pktsize.  That value saved there is not the MTU.  The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header.  The MTU does not include the link layer header.
2018-07-04 14:10:40 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte:
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
2018-06-06 09:54:30 -06:00
Gregory Nutt
9222f50e1c arch/: Make sure the up_irq_enable() is available on all architectures. I will not be able to test all of these new versions of this function so this may break things for awhile. 2018-06-06 09:25:40 -06:00
Gregory Nutt
d52c63f632 Change all references from OSX to macOS 2018-06-01 13:25:50 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
a8b6be4aaf The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method. 2018-01-22 08:17:45 -06:00
Gregory Nutt
62b8026976 Remove CONFIG_GRAN_SINGLE. It adds no technical benefit (other than some minor reduction in the number of interface arguments) but adds a lot of code complexity. Better without it. 2017-11-14 11:47:12 -06:00
Gregory Nutt
2f1894f2b4 Z80: Makefile fix for use with curre SDCC 2017-10-11 07:00:24 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following:
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following:
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following:
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Gregory Nutt
a5f3e1e6d1 compiler.h, limits.h, types.h: Update SDCC/z80 files to include support for long long, inline, __FILE__, and __func__. 2017-10-01 09:02:53 -06:00
Gregory Nutt
b436e3a2c8 A few more fixes for compilation with current SDCC compiler 2017-10-01 07:43:59 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00