sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,238 Commits 1 Branch 0 Tags 291 MiB
ba8e6083bf
Commit Graph

1884 Commits

Author SHA1 Message Date
Gregory Nutt
d2653ef7a8 ST25FL1: Update for changes to QSPI interface definitions 2015-08-28 10:15:39 -06:00
Gregory Nutt
361e35a7be QSPI: Make changes to interface to better work with the SAMV71 2015-08-27 14:16:51 -06:00
Gregory Nutt
d06b709652 Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-27 12:12:24 -06:00
Gregory Nutt
8811681d7f networking: Big performance improvement for local loopback driver 2015-08-27 11:05:53 -06:00
SaeHie Park
a268e0aeb9 Fix a typo from an earlier commit 2015-08-26 18:12:58 -06:00
Gregory Nutt
7936819fcc ST25FL1: Flesh out more initialization logic 2015-08-26 14:16:45 -06:00
Gregory Nutt
e6be3cea9f Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-26 10:44:35 -06:00
Gregory Nutt
7a168a791f Networking: Fix loopback device MTU 2015-08-26 10:33:44 -06:00
Gregory Nutt
044f5d38ac Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-26 07:20:36 -06:00
Juha Niskanen
70620d3dd6 rivers/rwbuffer: Fix some logic errors 2015-08-26 07:18:50 -06:00
Gregory Nutt
1cf57ae2bd Cosmetic 2015-08-26 07:16:07 -06:00
Gregory Nutt
32de036490 Local loopback: Set the IFF_UP flags during initialization because the local loopback device is always up 2015-08-25 20:09:12 -06:00
Gregory Nutt
8fe0121e1a Convert fragmentation ST24FL1 driver to use QSPI interface 2015-08-25 17:20:54 -06:00
Gregory Nutt
94ecf7ebad drivers/mtd/st25fl1.c: Add a driver for ST25FL1*K QuadSPI FLASH parts 2015-08-25 09:10:12 -06:00
Gregory Nutt
79aa3d40b0 Kconfig: CONFIG_NET_MULTILINK and CONFIG_NET_MULTINIC must be support if the loopback device and any real network device are selected 2015-08-25 06:51:15 -06:00
Gregory Nutt
a2c0068011 Fix some IPv6 loopback device problems 2015-08-24 17:27:38 -06:00
Gregory Nutt
3018dc31e5 Network local loopback: Another structural simplication 2015-08-24 16:08:17 -06:00
Gregory Nutt
eea69cf6e3 Networking: Local loopback, fix a error in last commit + fix a bad functional partitioning 2015-08-24 15:23:09 -06:00
Gregory Nutt
4d040d572a Networking: Eliminate recursion from the local loopback driver 2015-08-24 15:16:03 -06:00
Gregory Nutt
3c5f817513 Networking: Local loopback is basically functional and is no longer EXPERIMENTAL 2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1 Networking: With these changes, I can ping the local loopback device from the simulator 2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978 Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL 2015-08-24 11:29:54 -06:00
Gregory Nutt
ccb24e1766 drivers/net: Add a basic prototype for a local loopback device 2015-08-24 11:03:36 -06:00
Gregory Nutt
e21501c699 Merge remote-tracking branch 'origin/master' into localhost 2015-08-24 08:29:36 -06:00
Gregory Nutt
ea2fafb024 Add definitions to support a local loopback link layer 2015-08-24 08:25:08 -06:00
Gregory Nutt
3743d3d84a Add configuration options for forthcoming st25fl1 devices 2015-08-24 08:00:39 -06:00
Max Neklyudov
622c5c9aa6 Another TUN driver fix from Max Neklyudov 2015-08-21 07:40:13 -06:00
Max Neklyudov
425146255a Network drivers: Fix bug in tun interface driver. From Max Neklyudov 2015-08-17 09:04:58 -06:00
Gregory Nutt
51f386d08a Fix more common typos 2015-08-16 11:07:23 -06:00
Gregory Nutt
77f5c34af0 Fix some common typos 2015-08-16 11:00:30 -06:00
Paul A. Patience
3303ef8c85 Added support for other MS58XX altimeters. 2015-08-14 20:04:16 -04:00
Gregory Nutt
a543dfbcec Update ChangeLog; Convert a few tabs to spaces 2015-08-11 21:12:15 -06:00
Paul A. Patience
c4b888b41d Added MS5805 altimeter. 2015-08-11 22:50:11 -04:00
Paul A. Patience
a634ad5528 Added MB7040 sonar. 2015-08-11 13:26:56 -04:00
Paul A. Patience
65792c5dbc Added forward declarations of structures to fix header inclusion 
order bugs.
Removed an unused variable.
Added debug asserts to check for invalid I2C addresses.
 2015-08-10 16:18:37 -04:00
Paul A. Patience
c0964a17b4 Fixed a forgotten FAR, a typo, and an incorrect bit-field definition. 2015-08-10 14:45:40 -04:00
Gregory Nutt
9f1d7cddd8 Merged in paulpatience/nuttx (pull request #14) 
Converted the AS5048B to use the quadrature encoder interface, changed copyright notice to my boss's preference, and updated ChangeLog to use my full name
 2015-08-10 12:22:30 -06:00
Paul A. Patience
877d5f3b09 Changed copyright notices to my boss's preference. 2015-08-10 14:15:07 -04:00
Paul A. Patience
1d0e25af30 Convert the AS5048B to use the quadrature encoder interface. 2015-08-10 13:41:39 -04:00
David Sidrane
c83d92e846 RAMTRON: Update driver to include support for newer RAMTRON parts. 2015-08-10 11:30:37 -06:00
Gregory Nutt
b6d6776d02 Add a preliminary definition for an SPI slave interface 2015-08-08 10:45:15 -06:00
Gregory Nutt
e9bbc57831 Merged in paulpatience/nuttx (pull request #12) 
Added AS5048B magnetic rotary encoder.
 2015-08-07 15:33:48 -06:00
Paul A. Patience
b7e0fc34c5 Added AS5048B magnetic rotary encoder. 2015-08-07 17:22:01 -04:00
Gregory Nutt
834e01ea7c can.c: Fix a couple of missed DLC conversions 2015-08-07 11:41:31 -06:00
Gregory Nutt
6d59603610 Trivial updates from review of LM92 driver; Update ChangeLog 2015-08-06 16:33:02 -06:00
Gregory Nutt
41a09a6d64 Merged in paulpatience/nuttx (pull request #11) 
Added LM92 temperature sensor.
 2015-08-06 16:26:26 -06:00
Paul A. Patience
282c4f5347 Added LM92 temperature sensor. 2015-08-06 17:35:34 -04:00
Gregory Nutt
0dd273935a Standardize naming of all SLIP configuration options 2015-08-06 15:08:15 -06:00
Gregory Nutt
86769101a1 SLIP: Review code, update comments, add missing configuration items 2015-08-06 14:32:12 -06:00
Gregory Nutt
e1c902d468 Remove some incorrect comments 2015-08-06 14:06:43 -06:00
Gregory Nutt
007e258c2b Update some function headers 2015-08-05 16:22:40 -06:00
Gregory Nutt
4b58990362 CAN: Add CAN FD mode as a configuration option 2015-08-05 13:56:48 -06:00
Gregory Nutt
36d4559ee8 CAN: Define IOCTL commands that manage filters 2015-08-05 13:00:31 -06:00
Gregory Nutt
e3decca82c Cosmetic update to some comments 2015-08-05 08:07:58 -06:00
Anton D. Kachalov
2db954c189 Add support for multicast address (via hashtable) 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 19:43:17 +03:00
Gregory Nutt
679ae385aa Merged in rnouse/nuttx (pull request #9) 
Custom IOCTL support and more shadow warnings fixup
 2015-08-03 06:46:43 -06:00
Anton D. Kachalov
1bb74504a8 Add support for custom platform IOCTL on UART 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 15:32:51 +03:00
Gregory Nutt
08d83cfae3 Merged in rnouse/nuttx (pull request #8) 
UART 16550: putc logic fixup
 2015-08-03 06:32:17 -06:00
Anton D. Kachalov
a07ed262b4 Revert "Two more places there THRE is used with inverted sense" 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:21:01 +03:00
Anton D. Kachalov
2fa6237b49 Revert THRNE-patch. The problem was in u16550_putc 
Regarding to:
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1584
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1913

When UART_LSR_THRE bit is set, then we ready to transmit more.

Current u16550_putc loops while UART_LSR_THRE bit is set. This logic have to be inverted.

Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:19:55 +03:00
Gregory Nutt
15db2a45a4 drivers/net/slip.c: Fix another compilation error 2015-08-02 07:20:36 -06:00
Gregory Nutt
3bc46d9aad Merged in rnouse/nuttx (pull request #6) 
[drivers/serial/uart_16550] Typo fix in data bits setup
 2015-07-31 11:25:35 -06:00
Anton D. Kachalov
274b7986be [drivers/serial/uart_16550] Typo fix in data bits setup 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 20:19:54 +03:00
Gregory Nutt
e0fdd46292 USB host file uses DEBUGASSERT and so must include assert.h. Note by Brennan Ashton 2015-07-31 07:24:43 -06:00
Gregory Nutt
3669292024 Cosmetic changes from review of pull request 2015-07-31 07:17:07 -06:00
Anton D. Kachalov
2ef03d49fe [drivers/net/ftmac100] Remove private board-specific interrupt configuration calls. Configure Mode/Level outside of the driver scope. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 14:12:10 +03:00
Anton D. Kachalov
7613d97a90 [drviers/net/ftmac100] receive: process all available RX descriptors 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 08:48:13 +03:00
Anton D. Kachalov
cbd4586cad [drivers/net/skeleton] Add missed #endif 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-30 23:16:34 +03:00
Juha Niskanen
c33d61e00e Add missing configuration option for last set of ADC changed 2015-07-30 07:38:45 -06:00
Gregory Nutt
fb82061bf7 Two more places there THRE is used with inverted sense 2015-07-29 20:42:49 -06:00
Gregory Nutt
8935ff34d5 16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov 2015-07-29 16:31:21 -06:00
Anton D. Kachalov
f230c87fba Fix a type in the network driver skeleton file. 2015-07-29 16:08:56 -06:00
Anton D. Kachalov
88861e562a Add support for a Faraday FTMAC100 Ethernet MAC Driver. From Anton D. Kachalov 2015-07-29 15:57:58 -06:00
Gregory Nutt
bb30fa039f Fix a warning detected by tools/tesbuild.sh. function was not returning the correct value in the case of errors 2015-07-22 15:46:43 -06:00
Alan Carvalho de Assis
a01b2e5bbc drvers/sensor and include/nuttx/sensors: Add support to Bosch BMP180 barometer. From Alan Carvalho de Assis. 2015-07-20 07:18:27 -06:00
Gregory Nutt
5a7b2757aa Add definitions for SMSC LAN8742A PHY 2015-07-19 13:09:48 -06:00
Gregory Nutt
cb5a3bd84d Fix error in Kconfig of previous change: Can't mix tabs and spaces in help text 2015-07-17 08:31:21 -06:00
Gregory Nutt
652371c919 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
bf1adc1e55 Another CAN driver fix: From inspection, it appears that RTR counter was not being handled correctly 2015-07-15 19:52:08 -06:00
Gregory Nutt
f41df38b0b More CAN driver fixes: remove and unused semaphore. Looks to me that waiter counts are not being initialized 2015-07-15 19:27:36 -06:00
Gregory Nutt
048d338808 Another oops. I introduced a but in a previous commit. The CAN read method nees to return an error if sem_wait() fails for any reason 2015-07-15 18:51:31 -06:00
Gregory Nutt
621fef2c31 Some trivial clean up associated with the last commit 2015-07-15 18:43:53 -06:00
Gregory Nutt
320c584888 CAN driver: Fix a problem where the rx_sem count can grow without bounds 2015-07-15 18:20:08 -06:00
Alan Carvalho de Assis
d7d15072c4 Updated SSD1306 driver 2015-07-15 13:28:31 -06:00
Gregory Nutt
8580d37352 SSD1306: Rename ssd1306_helpers.h to ssd1306.h. Move all SSD1306 driver definitions from ssd1306_base.c to ssd1306.h 2015-07-15 11:46:28 -06:00
Alan Carvalho de Assis
a3e24a0b6c Modify the SSD1306 LCD driver to support either the SPI or I2C interface. From Alan Carvalho de Assis, 2015-07-15 11:21:54 -06:00
Sebastien Lorquet
9c9b6162d8 PCA9555: Extend interface to include methods for reading more than one bit at a time. From Sébastien Lorquet. 2015-07-10 10:33:07 -06:00
Gregory Nutt
3971d97332 Update ChangeLog 2015-07-09 08:27:08 -06:00
Sebastien Lorquet
b947002d6a This commit adds: 
-headers in nuttx/ioexpander to define the "generic" ioexpander framework
-files in drivers/ioexpander for the implementation of the NXP PCA9555 framework
-bindings in drivers/Kconfig and drivers/Makefile

From Sebastien Lorquet
 2015-07-09 08:27:07 -06:00
Gregory Nutt
be09a87c0e SST25: Eliminate some warnings 2015-07-03 14:38:33 -06:00
Sebastien Lorquet
c9649b5f04 STMPE811: I found that, in stmpe811_instanciate(), when CONFIG_STMPE811_MULTIPLE is enabled, and the call to stmpe811_checkid() fails, then the linked device list is not restored to its previous state. From Sebastien Lorquet. 2015-07-02 08:19:29 -06:00
Gregory Nutt
09c7373f24 Fix misc. compilation error/warning detected by tools/testbuild.sh 2015-07-01 14:33:37 -06:00
Gregory Nutt
8fbac280e9 drivers/net/slip.c: Fix a missed name change when many of network interface names changed sometime back but were apparently never updated for SLIP 2015-07-01 11:58:06 -06:00
Gregory Nutt
e9a4455038 drivers/usbdev: Eliminate some warnings 2015-07-01 10:02:19 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
bb7e15fc57 Misc. improvements to the TUN driver, mostly related to poll(). From Max Neklyudov 2015-06-04 06:54:55 -06:00
Gregory Nutt
391367e8ca LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY. 2015-06-03 17:34:36 -06:00
Gregory Nutt
7355a9044a TUN driver bug fix. From Max Neklyudov. 2015-06-03 10:45:13 -06:00
Gregory Nutt
4f05c80794 LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation 2015-06-01 08:07:32 -06:00
Gregory Nutt
0476d8168a More missing semicolons after DEBUGASSERT 2015-05-27 13:32:39 -06:00
Gregory Nutt
9e1c72e3e2 Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build 2015-05-18 13:16:32 -06:00
Gregory Nutt
82f51d01fb Update some comments 2015-05-18 08:53:24 -06:00
Gregory Nutt
d43a09275a AT24 EEPROM driver. Fix some an incorrect variable name used in conditional compilation. SourceForge patch #55 2015-05-15 06:15:58 -06:00
Gregory Nutt
2b3241d81f Clean up some logic in the CDC/ACM host drivers. Test with some other host controller drivers. There are lots of problems. 2015-05-14 10:22:08 -06:00
Gregory Nutt
5b687f4b0f Fix several defien -> define. Thanks Pierre 2015-05-13 06:33:17 -06:00
Gregory Nutt
6ef7977b65 USB device. All class drivers. There needs to be a check to make sure that the size of a returned string does not exceed the size of an allocated request buffer 2015-05-12 14:46:35 -06:00
Gregory Nutt
3c1af2feed Local sockets: Add poll support for Unix stream sockets. From Jussi Kivilinna. 2015-05-12 07:41:12 -06:00
Gregory Nutt
9df6bd0543 USB host CDC/ACM driver requires CONFIG_SERIAL_REMOVABLE 2015-05-11 15:10:41 -06:00
Gregory Nutt
2f8d7f3a03 CDC/ACM host: Cancelling activity on bulk endpoint fixes a crash when device removed 2015-05-11 12:47:37 -06:00
Gregory Nutt
c7a02488c6 Fix a cut'n'paste error in the last commit 2015-05-10 10:23:23 -06:00
Gregory Nutt
46e5d0a419 Add options to support all three host CDC/ACM protocols: Compliant, Reduced, and Bulk-Only 2015-05-10 08:16:58 -06:00
Gregory Nutt
bd437bfb03 Update ChangeLog 2015-05-09 16:23:19 -06:00
Gregory Nutt
4715a2e697 Update TODO list 2015-05-09 08:23:11 -06:00
Gregory Nutt
6519dc475d Use sched_kfree() instead of kmm_free() 2015-05-08 12:03:45 -06:00
Gregory Nutt
c35bb693a9 USB host CDC/ACM fixes. Still kind of buggy 2015-05-08 10:58:41 -06:00
Gregory Nutt
513344a084 Fix some missing quotes in a Kconfig file 2015-05-08 08:32:50 -06:00
Gregory Nutt
947fd7a5af USB host CDC/ACM: Improve RX responsiveness 2015-05-07 11:27:51 -06:00
Gregory Nutt
214aeeff57 USB host CDC/ACM: Add a bulk-only mode mostly for test, fix two bad assertions. Correct some loop termination logic in RX data receipt 2015-05-07 11:16:03 -06:00
Gregory Nutt
53bb938f23 Misc improvements to the CDC/ACM host driver, mostly related to parsing the configuration descriptor. Still does not work. 2015-05-07 10:02:51 -06:00
Gregory Nutt
691d7c9819 Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected. 2015-05-06 14:11:29 -06:00
Gregory Nutt
737fd7dcec drivers/usbhost: Add initial implementatino of a host-side CDC/ACM driver. Completely untested on initial commit (2015-05-06). 2015-05-06 12:49:00 -06:00
Gregory Nutt
4a8fbd8817 USB host: More fixes from last changes.. MSC block read and write must again return number of blocks on success. Fix numerous places where the assumption the ret == OK means success. Since the transfer method now returns the number of byte transfered, the correct test for success is ret >= 0 2015-05-05 15:48:48 -06:00
Gregory Nutt
9296eca193 USB Host function address calculation needs to reset the 'next' address when an address is released 2015-05-05 14:59:03 -06:00
Gregory Nutt
47a112974d USB host: Modify the transfer() and asynch() methods so that the actual size of the transfer is returned. Unverified on initial commit. 2015-05-05 13:14:22 -06:00
Gregory Nutt
81ab453f6a Fix a mistatement in a comment 2015-05-04 13:44:49 -06:00
Gregory Nutt
ea17bc3b68 USB hub class: Was not using the configured poll delay value 2015-05-04 13:44:12 -06:00
Gregory Nutt
e903259476 Hub: Use usleep instead of up_mdelay 2015-05-04 07:46:13 -06:00
Gregory Nutt
435d088182 SAMA5 EHCI: Mostly cosmetic 2015-05-03 08:51:44 -06:00
Gregory Nutt
c2a3f936aa USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port 2015-05-02 10:44:18 -06:00
Gregory Nutt
e4f538446b USB hub: Minor fix to reduce the amount of debug garbage on console in certain configurations 2015-04-30 13:03:28 -06:00
Gregory Nutt
1380945a13 USB hub: Add a configuration option to fallback to polling mode if the the HCD async method does not work. Don't call DRVR_CANCEL twice, and certainly not from the interrupt level. Add so checks so that we do not do some normal asynchronous actions if the hub has been disconnected 2015-04-30 11:30:01 -06:00
Gregory Nutt
b909ad04d8 USB HUB: Fix a deadlock that can occur if the HCD and the HUB try to share the high priority work queue. Now how work must be done on the low priority work queue. 2015-04-29 08:32:17 -06:00
Gregory Nutt
6e20a466ac Merge remote-tracking branch 'origin/master' into usbhub 2015-04-27 12:27:43 -06:00
Gregory Nutt
cec90e144a Another missing semicolon in a DEBUGASSERT statement 2015-04-27 12:26:40 -06:00
Gregory Nutt
d88d10830e USB host: Fix an attempt to take a semaphore from an interrupt handler 2015-04-26 10:05:15 -06:00
Gregory Nutt
397f31f061 Another hub-related interface change: Need to pass speed to EP0 2015-04-26 09:53:43 -06:00
Gregory Nutt
3bae38a2d9 USB HID mouse/keyboard: Fix a reference counting problem 2015-04-25 17:05:30 -06:00
Gregory Nutt
329ae78583 Fix a recently introduced deadlock in some class drivers 2015-04-25 15:57:57 -06:00
Gregory Nutt
4de9bc7b6c Trivial improvement of debug output 2015-04-25 14:52:36 -06:00
Gregory Nutt
e46cb394f9 Fixes some crashes when the hub is removed and/or reinserted 2015-04-25 12:16:22 -06:00
Gregory Nutt
38e0a4a1cb Fix a race condition when a mouse or keyboard device is removed from a hub 2015-04-25 11:17:57 -06:00
Gregory Nutt
e7792435c7 Add missing logic to destroy a class when the device is no longer connected to the hub port 2015-04-25 11:17:37 -06:00
Gregory Nutt
ed5287855f LPC17 USB host: Direction bit being set wrong from allocated control endpoints 2015-04-24 19:46:00 -06:00
Gregory Nutt
64fe226669 USB Hub: Cosmetic update to some naming 2015-04-24 18:32:09 -06:00
Gregory Nutt
becfe4ef9d HUB class must cancel any pending interrupt IN transfers before destroying the endpoint 2015-04-24 12:18:25 -06:00
Gregory Nutt
2768f13153 USB hub: Fixes for some port status change handling 2015-04-24 09:57:59 -06:00
Gregory Nutt
c9da86b4f0 Merge remote-tracking branch 'origin/master' into usbhub 2015-04-24 07:55:02 -06:00
Gregory Nutt
8ab4ea531e Update README 2015-04-24 07:48:53 -06:00
Gregory Nutt
a8a3790139 RA8875 LCD driver contributed by Marten Svanfeldt 2015-04-24 07:46:03 -06:00
Gregory Nutt
2586bc3fcc USB hub fixes. Mostly dealing with setting the hub function address at the right time and powering up downstream ports 2015-04-23 16:42:53 -06:00
Gregory Nutt
9752e12b11 USB HUB: Fix bugs, stray ampersand. Need to perfrom class destruction on the worker thread 2015-04-23 13:56:38 -06:00
Gregory Nutt
34e4edfd1a USB hub: Fix some port power enable logic 2015-04-23 11:24:05 -06:00
Gregory Nutt
adb50640c0 Correct errors in hub class destructor logic 2015-04-23 10:07:53 -06:00
Gregory Nutt
ab17603ceb Fix USB hub bugs: Don't allocate port EP0 until needed, otherwise run out of endpoints; using wrong pointer to access child endpoint array in a few places 2015-04-23 09:42:58 -06:00
Gregory Nutt
167f406050 Merge remote-tracking branch 'origin/master' into usbhub 2015-04-23 07:29:54 -06:00
Gregory Nutt
da04b29a68 Yet another missing semicolon on DEBUGASSERT 2015-04-23 07:29:15 -06:00
Gregory Nutt
64496a635c USB hub: Add some hub-related configuration settings 2015-04-22 17:16:35 -06:00
Gregory Nutt
f7ec9b0831 USB hub: Change to connection interface so that applications can deal with external hubs 2015-04-22 12:28:19 -06:00
Gregory Nutt
5c16454cdf Add USB hub initialization logic to a couple of board configurations 2015-04-21 13:44:14 -06:00
Gregory Nutt
fde0bf650e USB host: Integrate logic to assign device function address 2015-04-21 12:17:49 -06:00
Gregory Nutt
d6b963a62e USB host: Update skeleton driver file 2015-04-21 09:54:11 -06:00
Gregory Nutt
d62aa8c158 USB host: Remove getdevinfo() method. Rename hub structure to hubport structure. Get port and function address from hub port structure vs. parameters and other structures. 2015-04-21 07:26:28 -06:00
Gregory Nutt
2ea7a83bf5 USB hub: Move port index out of hub structure and into class structure 2015-04-20 16:50:32 -06:00
Gregory Nutt
4aeb5e549c Get USB host HID mouse driver to build. Error connect method prototypes. 2015-04-20 16:21:13 -06:00
Gregory Nutt
f7f3a7f74d USB hub: Decouple class and hub structures 2015-04-20 12:06:47 -06:00
Gregory Nutt
356292b60e Some trivial USB-related changes 2015-04-20 09:51:58 -06:00
Gregory Nutt
fa778aec07 USB hub: Add EP0 to all control transfers. There can be multiple EP0's with a hub 2015-04-20 09:35:43 -06:00
Gregory Nutt
9e0b239c37 Clean compile errors from last commit 2015-04-20 08:53:21 -06:00
Gregory Nutt
8e23ad72b5 USB hub: Add asych HCD interface 2015-04-20 08:41:33 -06:00
Gregory Nutt
0a014e0364 USB host: Cosmetic changes 2015-04-20 07:46:05 -06:00
Gregory Nutt
a6d9f0622c USB hub: First steps to make interfaces backward compatible 2015-04-20 07:45:11 -06:00
Gregory Nutt
8c1c365ae7 Reorder structure members for better packing 2015-04-19 15:58:09 -06:00
Gregory Nutt
8a23c52650 USB Hub: Change an the usbhost_ctrlxfer interface; move some functions around 2015-04-19 14:26:17 -06:00
Gregory Nutt
820bc08c34 USB Hub: Fix a few compilation errors 2015-04-19 12:01:47 -06:00
Gregory Nutt
1971ea3d4e Clean up some debug output 2015-04-19 11:24:06 -06:00
Gregory Nutt
de182f2a3a Merge remote-tracking branch 'origin/master' into usbhub 
Conflicts:
	nuttx/include/nuttx/usb/usbhost.h
 2015-04-19 10:55:20 -06:00
Gregory Nutt
7fcfca40b5 Bring in more logic from https://github.com/kaushalparikh/nuttx 2015-04-19 08:55:48 -06:00
Gregory Nutt
6bd7cfa823 Bring in USB hub-related files from https://github.com/kaushalparikh/nuttx. This is the work of Kaushal Parikh. This initial commit is incomplete. This is quite a bit more hub logic that needs to come in before the port is complete. 2015-04-18 16:20:02 -06:00
Gregory Nutt
726dadffb4 Add CONFIG_CDCACM_IFLOWCONTROL. Just hooks for now 2015-04-16 12:24:56 -06:00
Gregory Nutt
7bf9be7c33 Add hooks to CDC/ACM driver to support RX flow control 2015-04-16 09:11:51 -06:00
Gregory Nutt
a0866c0753 drivers/input/max11802.c: Fix possible unmatched IRQ restore. Noted by Juha Niskanen 2015-04-14 07:22:02 -06:00
Gregory Nutt
2aa80e06f5 Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
Gregory Nutt
e4d2822af8 Make some file section headers more consistent with standard 2015-04-08 07:15:32 -06:00
Gregory Nutt
bf7b5746a5 Correct typos in comments 2015-04-03 08:01:39 -06:00
Gregory Nutt
e9e386ac6e Add ILI9488 header file 2015-04-03 07:12:11 -06:00
Gregory Nutt
e78e762dd6 Add a very basic driver for the CS2100-CP Fractional-N Multipler chip. 2015-04-02 13:00:10 -06:00
Gregory Nutt
0ec67181c9 Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/. 2015-04-01 12:37:44 -06:00
Gregory Nutt
312ae5713e PIC32MZ Ethernet: Add support for LAN8740A PHY 2015-03-29 07:05:30 -06:00
Gregory Nutt
469827640b Add support for LAN8740 2015-03-23 15:34:10 -06:00
Gregory Nutt
495f420978 Extend the AT24 EEPROM driver so that it supports: (1) the byte-oriented read() method, (2) parts with extended memory regions, and (3) parts with 8-bit addressing. 2015-03-17 14:27:27 -06:00
Gregory Nutt
32aadd9cc2 SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling 2015-03-16 13:51:37 -06:00
Gregory Nutt
8783526a5f Fix some bad logic when file system debug is turned on: Arguments to syslog were missing so that garbage was being printed. 2015-03-15 09:34:07 -06:00
Gregory Nutt
b83cea4f99 Back out 70cb75adaf3243478276cebf367c5f47c4725715 2015-03-13 10:40:09 -06:00
Gregory Nutt
c5953bd0e9 Debugging and manuals (this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf 
and this one https://www.sdcard.org/downloads/pls/simplified_specs/part1_410.pdf) shows that ACMD23
must be preceeded with CMD55 command as any other ACMD commands.

Also, after the block reading wait loop must be inserted before writing the next block of data to
the sd card

From Dmitry Nikolaev via Jussi Kivilinna
 2015-03-13 07:26:16 -06:00
Gregory Nutt
3473bb1635 drivers/serial: Report correct number of bytes free in serial buffer with FIONWRITE. From Jussi Kivilinna. 2015-03-13 07:22:43 -06:00
Gregory Nutt
0a939ff218 Pipes: Fix zero-lenth writes. From Jussi Kivilinna 2015-03-13 07:21:06 -06:00
Gregory Nutt
dba41a7048 chdev_driver: Avoid NULL pointer dereference when bch->refs == 255. From Juha Niskanen 2015-03-12 07:58:36 -06:00
Gregory Nutt
26b9b5a252 usbdev: usbmsc_scsi: Add NULL pointer check. From Juha Niskanen 2015-03-12 07:55:53 -06:00
Gregory Nutt
21d6e41032 Add TUN device. From Max Neklyudov 2015-03-11 06:52:56 -06:00
Gregory Nutt
b5bfb6762d Fix some BBRAM return values (from David Sidrane). Also some MTD-related cosmetic changes 2015-03-05 08:08:11 -06:00
Gregory Nutt
e41d78e848 Add missing CONFIG_SPI_CALLBACK selection to the drivers/spi/Kconfig. Noted by Freddie Chopin 2015-03-04 07:23:46 -06:00
Gregory Nutt
82251ccf28 Cosmetic updates from code review 2015-03-04 06:51:56 -06:00
Gregory Nutt
fada63014d Review and bring closer to nuttx coding style 2015-03-02 10:18:25 -06:00
Gregory Nutt
e2e7c791c1 Refreshed Spark Configurations 2015-02-28 15:44:58 -06:00
Gregory Nutt
6cc74fecc8 Refresh configuration 2015-02-25 07:22:58 -06:00
Gregory Nutt
1c4863c24e Trivial update to some comments 2015-02-24 06:41:28 -06:00
Gregory Nutt
4320b1b1a3 CAN driver: Another Ooops... Cannot save the updated driver open count if the we fail to initialize the CAN driver, causing the open to fail 2015-02-23 20:14:39 -06:00
Gregory Nutt
f4a2ebc220 CAN driver: Oop. unlink method does not exist if there operaions on the pseudo filesystem are disabled 2015-02-23 19:49:19 -06:00
Gregory Nutt
ebe289725b in nuttx/drivers/can.c can_open function: 
this line "dev->cd_ocount = tmp;" needs to be moved a few lines down otherwise the open count will only be incremented from 0 to 1. This causes problems when trying to open the can bus from two different tasks.

SourceForge Patch #46 from Anonymous
 2015-02-23 19:28:52 -06:00
Gregory Nutt
63ab39b274 VFS: The inode unlink method should not be support if operations on the root pseudo-filesystem are disabled. 2015-02-18 09:34:58 -06:00
Gregory Nutt
e2336a07bb The RTC ioctl() method is now a configuration option 2015-02-18 08:23:10 -06:00
Gregory Nutt
f94e601981 Add an IOCTL method to the RTC interface 2015-02-18 08:05:31 -06:00
Gregory Nutt
d6704a1cd7 Suffer the consequences of moving struct timeval to its correct location 2015-02-15 15:18:35 -06:00
Gregory Nutt
5cb233f712 RTC: A little more clean-up of the RTC driver 2015-02-15 08:19:23 -06:00
Gregory Nutt
fcadc2d8e4 Add an RTC upper half driver. This is the driver that is documented in include/nutt/rtc.h 2015-02-13 11:49:04 -06:00
Gregory Nutt
c463f9fad6 Move timer-related drivers from drivers/ to drivers/timers. 2015-02-13 10:30:06 -06:00
Gregory Nutt
3724a5e98e RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
e7470e0834 Update dates in all skeleton files 2015-02-13 06:13:34 -06:00
Gregory Nutt
63ac1ec423 Cosmetic updates to comments 2015-02-12 13:44:22 -06:00
Gregory Nutt
3e1173225e Renamed SPIDEV_GSENSOR to SPIDEV_ACCELEROMETER just because it looks better beside SPIDEV_BAROMETER 2015-02-12 12:26:19 -06:00
Gregory Nutt
38aa31dea2 Update ChangeLog 2015-02-12 12:21:05 -06:00
Gregory Nutt
fd6d299788 Add driver for the Feescale MPL115A baramoter. From Alan Carvalho de Assis 2015-02-12 12:18:43 -06:00
Gregory Nutt
410fcaa0a1 Added a forward reference to struct inode to avoid warning about mismatching types in assignemnt 2015-02-10 13:41:49 -06:00
Gregory Nutt
f3427cb32a mtd/ramtron.c: Table of parts is not terminated properly if CONFIG_RAMTRON_FRAM_NON_JEDEC is not defined 2015-02-09 16:35:58 -06:00
Gregory Nutt
94d3c68013 Oops... Conditioned on IPv4 wheren IPv6 was intended 2015-02-09 14:16:32 -06:00
Gregory Nutt
3384274087 Fix IPv4-dependend debug output 2015-02-09 13:18:31 -06:00
Gregory Nutt
b285162e79 Fix some warnings in audio code causing by fixing the prototypes of mq_send() and mq_receive() 2015-02-09 12:50:04 -06:00
Gregory Nutt
8a28f7fc5d Networkin: Fix an error in network driver skeleton file 2015-02-09 12:49:09 -06:00
Gregory Nutt
3465cb6138 SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
6f335dc6c6 STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane. 2015-02-07 13:59:45 -06:00
Gregory Nutt
a9c71630e1 Add IPv6 support to network driver skeleton and to SAMA5D4 Ethernet driver (which, unfortunately is still missing address filtering logi) 2015-02-05 10:49:32 -06:00
Gregory Nutt
f472041ce2 RAM disk: Missed a few changes in the last commit 2015-02-01 08:20:30 -06:00
Gregory Nutt
2407008b6e drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
Gregory Nutt
eceac1612d Fix some compilation errors introduced in the last commit 2015-01-31 13:24:59 -06:00
Gregory Nutt
eb1aca3e46 Add an unlink method to block driver interface. Same motivataion as for the same modification to the character driver interface 2015-01-31 13:19:23 -06:00
Gregory Nutt
fa949604ba Remove reference to used variable 2015-01-31 12:49:51 -06:00
Gregory Nutt
f24520acbb Backout use of named initializers. Not C99 2015-01-31 12:29:21 -06:00
Gregory Nutt
39a5238c43 Pipes/FIFOs: Implement the unlink method. If the pipe/FIFO is unlinked, it will marked the pipe/FIFO as unliked. If/when all open references to the driver are closed, all of the driver resources will be freed. 2015-01-31 12:05:01 -06:00
Gregory Nutt
e86d00913e Unix domain/FIFOs: Fix a race condition between FIFO buffer operations and the opening and closing of FIFOs which necessary when the FIFOs are used to support Unix domain, datagram sockets. The default policy is the deallocate FIFO buffering when the last client closes the pipe. When when used for datagram communicatinos, packets left in the FIFO will be lost. Some like UDP read-ahead is needed: The buffered data in the FIFO needs to be retained until the reader gets a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to control the buffer policy. Default (0) is the legacy behavior; Unix domain datagram logic sets the alternative policy so that the packet data persists after the FIFO is closed. 2015-01-30 11:14:24 -06:00
Gregory Nutt
2f009a2afe Networking: SLIP interface improvements. From Macs N. 2015-01-30 08:09:38 -06:00
Gregory Nutt
32d2a4c548 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
1ad73c52b1 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
a53ae59284 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
a4a6917267 Fixes some issues found by the PX4 team using Coverity. From Pavel Krienko 2015-01-19 13:01:20 -06:00
Gregory Nutt
bbafb8f2fe Tiva Ethernet: When calling into the stack from the worker thread, it is necessary to have the stack locked 2015-01-18 16:58:11 -06:00
Gregory Nutt
b7c0bfebd5 Tive Ethernet: Fix some race conditions in the driver that become apparent when debug is enabled 2015-01-17 10:59:45 -06:00
Gregory Nutt
b648733589 Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 10:25:53 -06:00
Gregory Nutt
89538ac4a2 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
a7ce1279f9 Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics. 2015-01-14 16:10:38 -06:00
Gregory Nutt
31a94816b2 USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts 2015-01-11 08:05:09 -06:00
Gregory Nutt
83d6e6403c drivers/mmcsd/Kconfig: ARCH_HAVE_SDIOWAIT_WRCOMPLETE should not depend on MMCSD_SDIO 2015-01-09 07:21:43 -06:00
Gregory Nutt
089e001874 STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y 2015-01-08 18:12:06 -06:00
Gregory Nutt
f787440a04 STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE 2015-01-08 17:47:34 -06:00
Gregory Nutt
1842525cc2 MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy. 
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
 2015-01-08 06:23:42 -06:00
Gregory Nutt
383a47fb28 DK-TM4C129X: Add support for on-board TMP100 temperature sensor 2015-01-06 11:50:56 -06:00
Gregory Nutt
207835bd0d Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt 2015-01-05 15:12:45 -06:00
Gregory Nutt
52aeabb4b2 Cosmetic changes 2015-01-02 13:59:47 -06:00
Gregory Nutt
51b220c6d5 Ethernet skeleton: Add some more example logic 2014-12-31 13:45:19 -06:00
Gregory Nutt
2317da4192 Minor corrections to Ethernet driver skeleton 2014-12-31 13:02:30 -06:00
Gregory Nutt
6d1a79ed40 Minor updated to Ethernet driver skeleton 2014-12-31 12:26:18 -06:00
Gregory Nutt
09446f7d27 Update drivers/net/skeleton.c 2014-12-31 06:37:14 -06:00
Gregory Nutt
157916ba4c Uses DEBUASSERT, mut include assert.h 2014-12-30 16:58:02 -06:00
Gregory Nutt
3666af88d4 drivers/net/skeleton.c: Add outline for support with CONFIG_NET_NOINTS 2014-12-30 14:56:37 -06:00
Gregory Nutt
5ee81c0d50 Serial: Allow serial console selection even if /dev/console is disabled: There can still be a serial console with no file system at all 2014-12-28 15:23:05 -06:00
Gregory Nutt
089578319a STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
33f7151cd9 Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver 2014-12-27 09:45:45 -06:00
Gregory Nutt
32fd858dc6 Serial RX Flow Control: Fix a bunch of compile problems introduced into unbuilt, conditioned out logic 2014-12-27 08:15:41 -06:00
Gregory Nutt
2fadd0da4b Eliminate an unnecessary calculation in the serial RX flow control logic 2014-12-27 08:00:48 -06:00
Gregory Nutt
aefde565d3 Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
1c39b67e32 STM32: Fix some incorrectly placed conditional logic 2014-12-26 12:41:35 -06:00
Gregory Nutt
33bcb5dbca Back out some incorrect conditional compilation 2014-12-26 10:26:52 -06:00
Gregory Nutt
6daa9468f6 More RAMTRON related fixes from David Sidrane 2014-12-26 08:15:59 -06:00
Gregory Nutt
996d6c9d55 Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane 2014-12-26 07:59:09 -06:00
Gregory Nutt
64ce7563f2 CC3000: Fix yet another typo in last two commitsgit diff I should not be doing this when I have the flugit diff 2014-12-18 16:27:46 -06:00
Gregory Nutt
49a22f1ccb CC3000: Oops. Fix an error in the last commit 2014-12-18 07:39:55 -06:00
Gregory Nutt
2fe506d70c CC3000 Fix: Data can be unaligned. When dereferences as an input ntosh(), a bad value is returned. Reported by Alan Carvalho de Assis 2014-12-18 07:18:00 -06:00
Gregory Nutt
8e4f7230f9 ADXL345: Don't select device if only change SPI settings 2014-12-17 12:01:18 -06:00
Gregory Nutt
34609141b0 ADXL345: Free allocations on failure 2014-12-16 17:27:09 -06:00
Gregory Nutt
d818ab5e35 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
c9ca51fc8a Minor clean-up associated with the ADX345 driver 2014-12-16 10:18:44 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
ece6963c21 Update a README file 2014-12-16 07:51:50 -06:00
Gregory Nutt
4aa9320da9 Update README files 2014-12-15 19:01:40 -06:00
Gregory Nutt
623757d77c Update TODO list and add REVISIT comment 2014-12-13 08:44:28 -06:00
Gregory Nutt
d09bb13833 In case a thread is doing a blocking operation (e.g. read()) on a serial 
device, while it is being terminated by pthread_cancel(), then
uart_close() gets called, but the semaphore (dev->recv.sem in the above
example) is still blocked.

This means that once the serial device is opened next time, data will
arrive on the serial port (and driver interrupts handled as normal), but
the received characters never arrive in the reader thread.

This patch addresses the problem by re-initializing the semaphores on the
last uart_close() on the device.
 2014-12-13 08:07:21 -06:00
Gregory Nutt
a84bd3f433 M25P serial flash driver: Add subsector size of the M24P16 part. From Lazlo 2014-12-10 18:48:36 -06:00
Gregory Nutt
cdc8fc52d1 SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit 2014-12-09 14:11:15 -06:00
Gregory Nutt
8bd5556b47 Fix compilation errors if CONFIG_DISABLE_MOUNTPOINT is selected 2014-12-08 07:14:31 -06:00
Gregory Nutt
c0c108d5e2 Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet 2014-12-05 09:13:34 -06:00
Gregory Nutt
3cc6bee189 Nucleo-f4x1re: Fix some joystick pin definitions 2014-12-04 12:04:21 -06:00
Gregory Nutt
1f2447502f SAMA5D3 Xplained: Add support for the Itead Joystick shield 2014-12-03 12:24:23 -06:00
Gregory Nutt
19d31412f7 Update/correct some comments 2014-11-29 07:08:30 -06:00
Gregory Nutt
2b8fe6709b Add an analog joystick driver. Initial checkin is only a little more of a clone of the discrete joystick driver and is as-of-yet untested 2014-11-28 19:59:27 -06:00
Gregory Nutt
24d4253e1f Fixes to get the discrete joystick driver and test working 2014-11-28 15:56:18 -06:00
Gregory Nutt
544322edb9 DJoystick: Add a new ioctl to get the support joystick discrete signals 2014-11-28 15:39:57 -06:00
Gregory Nutt
0d04a4e9ba Fix missing quote in Kconfig 2014-11-28 10:16:58 -06:00
Gregory Nutt
e42f7b552f This commit is a set of patches 02/11 through 03/11 correcting issues with the CC3000 networking (01/11 was committed separated). Among these 10 patches: 
03/11: CC3000 driver was getting stuck at recv() when remote host closed connection and application tried to read data from remotely shutdown socket. This patch adds proper handling for remotely closed socket event.

07/11: Socket state initialization was done in 'register', while it should be initialized in 'open' and deinitialized in 'close'. Old way caused problems when device is closed, power-cycled and then reopened as old socket state was left enabled.

08/11: Select thread was getting stuck after 'close, power-cycle, reopen', since selectsem was not properly setup and cleaned up.

09/11 'maxFD' was not properly reset in select worker and not checked for before calling cc3000_select().

10/11: After wlan_stop()/cc3000_close(), irqsem was left with count '-1'. Therefore on next wlan_start()/cc3000_open(), initial value for irqsem was wrong. Additional repeated wlan_start()/wlan_stop() decreased irqsem value further. Obviously this causes driver not to function correctly and freeze.

Patch moves initialization and destruction of waitsem, irqsem and readysem to cc3000_open/cc3000_close.

All are: Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-28 08:52:52 -06:00
Gregory Nutt
5f0343bed9 Use usleep instead of usdelay as CONFIG_BOARD_LOOPSPERMSEC might not be calibrated correctly and CC3000 is fine with longer wait. 
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
 2014-11-28 08:16:30 -06:00
Gregory Nutt
2d9bd07525 Some additional, minor improvements to djoystick interrupt controls 2014-11-27 20:20:10 -06:00
Gregory Nutt
0ec5043a4e Add an interface definition and upper half driver for a discrete joystick device 2014-11-27 17:42:16 -06:00
Gregory Nutt
57e57bba36 LPC4357 EVB: Ooops got sense of the LED GPIO backward 2014-11-27 12:38:04 -06:00
Gregory Nutt
f2603866e0 Widen the name space: Rename CONFIG_SPI_EEPROM to CONFIG_EEPROM so that I2C EEPROMs can live there too 2014-11-27 11:08:27 -06:00
Gregory Nutt
e3898a7911 Update README 2014-11-27 10:40:51 -06:00
Gregory Nutt
d5c808c1fe EEPROM: Add a README file 2014-11-27 09:14:19 -06:00
Gregory Nutt
bc3212d70e EEPROM: Add a README file 2014-11-27 09:14:00 -06:00
Gregory Nutt
d8107d2b97 Loop device should return -EINTR is interrupt by a signal 2014-11-27 09:12:15 -06:00
Gregory Nutt
b29925a63b EEPROM: prevent writes past end of device. From Sébastien Lorquet 2014-11-27 07:59:43 -06:00
Gregory Nutt
3f2c90c1e9 Fix minor typo in C comments 2014-11-27 06:49:07 -06:00
Gregory Nutt
1a33afb66c Fix to get a clean build with EEPROM support disabled 2014-11-26 15:37:01 -06:00
Gregory Nutt
40b27115cc Add support for generic EEPROM access via a character driver. Add also the EEPROM driver itself. From Sebastien Lorquet 2014-11-26 13:55:34 -06:00
Gregory Nutt
9ac09db800 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:46:14 -06:00
Gregory Nutt
2994448d85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
5d231b25f0 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
33627632a5 Network: Fix compilation problem when mutliple networks enabled 2014-11-17 10:22:30 -06:00
Gregory Nutt
b9cd425bc2 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all drivers/net (except slip.c) 2014-11-16 08:53:20 -06:00
Gregory Nutt
25a9005ce7 Remove use of NET_LL_HDRLEN from Ethernet drivers. Use ETH_HDRLEN instead 2014-11-15 09:05:34 -06:00
Gregory Nutt
2b758537ea Network: Misc fixes for clean complete with both Ethernet and SLIP enabled 2014-11-15 08:55:50 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
8d00912207 Add mirror (x/y) and inverse video (black<->white) options to the ST7565 LCD driver. From Pierre-noel Bouteville. 2014-11-15 06:43:12 -06:00
Gregory Nutt
ebdff66c8b ARP: Add support for the case where there are multiple networks: One being Etherenet and the other not (say slip or perhaps someday PPP). In that case, we need to suppress ARP-related operations on the SLIP/PPP interface only 2014-11-14 18:25:33 -06:00
Gregory Nutt
e03c764d92 I don't think that the net_route function has ever worked correctly. The source ip was updated in the match struct instead of the route ip. From Brennan Ashton. 2014-11-14 16:45:25 -06:00
Gregory Nutt
ca15802ae5 Trival fix to comment 2014-11-14 10:58:13 -06:00
Gregory Nutt
9f3d4b30fb Add st7565.c to build 2014-11-14 06:55:16 -06:00
Gregory Nutt
3576e249b5 Add driver for ST7565 that works with NHD‐C12864KGZ display. From Pierre-noel Bouteville. 2014-11-13 16:03:52 -06:00
Gregory Nutt
c956d6d820 Add support for seeking in BCH. From Sébastien Lorquet. 2014-11-13 09:04:42 -06:00
Gregory Nutt
d9b238b002 Extend MTD support to M25P16. From Sébastien Lorquet 2014-11-07 10:35:03 -06:00
Gregory Nutt
b99db64f15 rwbuffer, fix compiler error 2014-11-05 15:26:48 -06:00
Gregory Nutt
5120d745fd Fix some typos 2014-10-29 10:48:50 -06:00
Gregory Nutt
6c9f325e1e Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
0196b77961 EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
37e08c3b49 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d13c9a08b9 EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
fa3753c466 rivers: enable usage of ili9341 
This enables build and configuration of the ili9341 lcd interface driver.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:27:56 -06:00
Gregory Nutt
beff697bc7 drivers: implements lcd interface for ili9341 
This implements the lcd interface to displaying data on the lcd display powered
by the ili9341 lcd driver.

This driver implements all methods defined in the lcd_dev_s structure except
getcontrast and setcontrast. They are not supported by the hardware.

Furthermore the driver allows to use multiple displays powered by the ili9342 IC
with only one driver instance. So it is theoretically possible to support more
than one connected ili9341 lcd display. The displays can be configured
independently. Currently two lcd devices supported. This should be enough for
now. Read the corresponding code section of how to add more devices if
neccessary.

The following settings are configurable:

1. Pixel format
   Define the pixel format of the connected display. Currently only
   RGB-565 supported.

2. Orientation
   Define the orientation of the display. This can be portrait or
   landscape and reversed values.

1. Write only
   The driver allows to disable any getrun method if not neccessary to
   reduce code size. This is done by enable CONFIG_LCD_NOGETRUN in the nuttx
   configuration.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:19:43 -06:00
Gregory Nutt
1a27a4d4c0 Eliminate warnings 2014-10-11 17:02:35 -06:00
Gregory Nutt
c38b81431f Cosmetic updates to comments 2014-10-11 15:20:21 -06:00
Gregory Nutt
d7d759f7a7 Update everything under nuttx/drivers to use the corrected syslog interfaces 2014-10-08 10:18:58 -06:00
Gregory Nutt
b33f8b3013 MTD read-ahear/write buffering layer seems functional 2014-09-25 13:35:10 -06:00
Gregory Nutt
a5bc26db4a Fixes for compile of rwbuffer.c 2014-09-25 11:02:30 -06:00
Gregory Nutt
7c89724b99 A few fixes for clean apps/examples/mtdrwb build 2014-09-25 10:41:47 -06:00
Gregory Nutt
6626f62b08 In at45db_bwrite, the buffer is not increased when writing more than 1 page. Sourceforge bug #34 2014-09-25 06:48:04 -06:00
Gregory Nutt
34a057334c Update SMART FS procfs support. From Ken Pettit 2014-09-22 11:19:49 -06:00
Gregory Nutt
b37c0a832a Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
47d55c28dc Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
23147c40a5 Remove final traces of the 8015 from the NuttX source tree 2014-09-01 13:21:15 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
9cd1ddada4 Rename kmemalign to kmm_memalign and krealloc to kmm_realooc for consistency with other naming 2014-08-31 15:27:37 -06:00
Gregory Nutt
2906ff6a4a Cosmetic: Fix all comments, defaults, etc. that references the defunct name user_start 2014-08-30 11:14:51 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
98cf3b06e5 nuttx/drivers: Remove explicity references to errno. That is a problem from within the kernel for certain configurations 2014-08-28 16:59:06 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
cf242fbeb4 SAM4E-EK: Add ILI9341-based LCD driver 2014-08-20 11:45:01 -06:00
Gregory Nutt
004788d7c0 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
7cc93b708a SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts 2014-08-17 14:07:53 -06:00
Gregory Nutt
e04ab2bcfc In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts) 2014-08-17 13:03:18 -06:00
Gregory Nutt
eb5e2e4b20 Finishes the ioctl definition to subscribe to PHY events. Revamp network ioctl signature to support arguments other than struct mii_ioctl_data. 2014-08-16 14:08:04 -06:00
Gregory Nutt
8428a58bdc Add support for an ioctl that can be used to notify an application when there is a change in the network status signalled by a PHY interrupt 2014-08-16 12:56:02 -06:00
Gregory Nutt
4beb3c0ad7 Move SLIP prototypes from net.h to new slip.h 2014-08-16 10:23:17 -06:00
Gregory Nutt
c52f634b79 Standardize a PHY interrupt attachment interface 2014-08-16 08:34:36 -06:00
Gregory Nutt
320707fdfa SAMA5: Fix bugs in timer/counter interrupts and one-shot timer 2014-08-10 10:47:38 -06:00
Gregory Nutt
a3e28c2c16 audio NULL driver: Fix an error in a variable name 2014-08-09 10:33:31 -06:00
Gregory Nutt
6e0acd7cd4 WM8904: Don't use MSEC2TICK in timeout calculation 2014-08-08 11:02:45 -06:00
Gregory Nutt
c9661ad5a7 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
bb29ba0a00 Costmetic changes 2014-08-05 10:03:29 -06:00
Gregory Nutt
8065ab73a4 WM8904: Add reset logic to put the part back in its initial state after playing each WAV file. Base samles per second on frame length, not bits-per-sample. Use a different frame length for 8-bit and 16-bit data 2014-08-04 19:26:43 -06:00
Gregory Nutt
dc8b040573 WM8904: Correct calculation of bitrate (I am not sure why this is correct). LR clock divisor is now a constant 32-bits per frame. Conditioned out interrupt logic; it is not being used. Also added some FLL lock interrupt/poll logic (which was subsequently disabled). 2014-08-04 15:08:20 -06:00
Gregory Nutt
c68e42c437 WM8904: Restore mystery bit in setup that was accidentally tossed before 2014-08-03 19:29:02 -06:00
Gregory Nutt
678c0aac8d WM8904: Tried disabling the SYSCLK while updating the FLL. Didn't help but is still probably a correct change 2014-08-03 18:44:51 -06:00
Gregory Nutt
72b739fbcb WM8904: Add logic to analyze BCLK setup 2014-08-03 17:11:38 -06:00
Gregory Nutt
b9384ced60 WM8904: Various updates to get BCLK/LRCLK correct. Acutally worse the parent, but I think is on the right track 2014-08-03 13:28:20 -06:00
Gregory Nutt
b0d0ac72a7 WM8904 driver: Disable the FFL at the end of playing. 2014-08-02 14:28:10 -06:00
Gregory Nutt
a2d6c0c2b4 WM8904: Add logic to program the FLL to achieve the bitrate 2014-08-02 12:40:57 -06:00
Gregory Nutt
f4bc0ad99a WM8904: Add an option to control WM8904 register dumping 2014-08-02 06:52:42 -06:00
Gregory Nutt
7e576e308a WM8904 I2C: Fix an error in writing. I am not sure why this fixes the problem 2014-08-01 18:22:33 -06:00
Gregory Nutt
e59bb45b33 Add debug logic to dump WM8904 registers 2014-08-01 18:07:20 -06:00
Gregory Nutt
3e1e15b04a WM8904: Can't reset the WM8904 unless we also reinitiailize all registers. Try to get a saner timeout based on sample rate, bits-per-sample, and buffer size. 2014-07-31 19:14:41 -06:00
Gregory Nutt
e214382264 Audio: Change how the end of the audio stream is detected by the leaf audio component. This used by be done by looking for the first partial buffer. That does not work with the in-place sub-sampling performed by the PCM decoder: That always reduces the size of the buffer so that all buffers only partially filled by the time they get to the leaf. Now, a flag is set in the audio buffer flags set to indicate the final buffer in the stream. 2014-07-31 16:36:09 -06:00
Gregory Nutt
487a672d76 WM8904: Was not saving i2s interface instance 2014-07-31 15:00:45 -06:00
Gregory Nutt
9c80dfb31c Updated README file, cosmetic changes to comments and debug output 2014-07-30 10:19:09 -06:00
Gregory Nutt
be8fe9a311 Costmetic update to comments 2014-07-29 20:03:52 -06:00
Gregory Nutt
75daeb75a3 Fix some compile problems with the WM8904 driver due to recent audio subsystem changes 2014-07-28 16:33:25 -06:00
Gregory Nutt
c9f15ffd3d PCM: First cut at fast forward by subsampling 2014-07-27 18:33:17 -06:00
Gregory Nutt
0cc9b06eca Add definitions to support fast forward and rewind configuration 2014-07-27 12:25:40 -06:00
Gregory Nutt
014dd77237 Audio: Fix some compilation issues introduced with some of the recent changes 2014-07-25 11:27:29 -06:00
Gregory Nutt
08fa9a9d54 Costmetic change 2014-07-25 10:04:20 -06:00
Gregory Nutt
0399be55d3 Fix some compile errors when audio DEBUG is enabled 2014-07-24 15:05:13 -06:00
Gregory Nutt
22f8503d0a Convert ac_format and ac_controls to unions to make access a little cleaner 2014-07-24 10:21:04 -06:00
Gregory Nutt
dba43a9c75 Audio: Get rid of the decoder->driver IOCTLs that I added a couple of commits back; Use existing configure method 2014-07-24 09:56:39 -06:00
Gregory Nutt
e100726a41 Fix a type in the audio Kconfig file, UDIO->AUDIO 2014-07-23 14:48:21 -06:00
Gregory Nutt
72133f5d95 Add ioctls so that PCM decoder can configure the driver bitrate, num channels, and sample width 2014-07-23 12:21:04 -06:00
Gregory Nutt
516b343666 Flesh out missing PCM decoder methods 2014-07-23 11:58:43 -06:00
Gregory Nutt
ca7d7c34ce Audio: Add a NULL audio device that can be used to simply unit-level testing of audio decoders 2014-07-23 10:12:32 -06:00
Gregory Nutt
cfa76b5278 Flesh out a few more PCM methods, still incomplete. Re-vision PCM structure definition 2014-07-22 19:23:05 -06:00
Gregory Nutt
d7a9633dcd Rename pcm_decode.h to pcm.h since it will hold more than just decoding definitions. Fix some porting errors like idbg should auddbg, etc. Add wav file header and a few low-level wav utilities. 2014-07-22 15:54:56 -06:00
Gregory Nutt
8548c64915 Remove WM8904 driver unused paramters, clean-up comments, remove some kruft in capability reporting 2014-07-22 11:47:27 -06:00
Gregory Nutt
05e82d4f01 Add missing configuration option to select the MAX11802 touchscreen controller 2014-07-22 07:09:48 -06:00
Gregory Nutt
0b3ff976ff Fix an error in SLIP escaping 2014-07-22 06:55:42 -06:00
Gregory Nutt
78d7925ce0 Kconfig: MW8904 driver no longer depends on EXPERIMENTAL (it probably still should) 2014-07-20 10:27:25 -06:00
Gregory Nutt
f4bcb730d2 WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled 2014-07-20 09:17:36 -06:00
Gregory Nutt
4f6625380b The WM8904 audio driver is mostly code complete and ready to begin initial testing 2014-07-19 18:52:58 -06:00
Gregory Nutt
6d9f9e37bf SAMA5D4-EK: Add WM8904 initialization logic 2014-07-19 11:58:53 -06:00
Gregory Nutt
89ed7ab558 WM8904: Add initialization logic 2014-07-19 10:20:19 -06:00
Gregory Nutt
3b8c4a399d Framework for a WM8904 audio driver. The initial driver check-in is simply Ken Pettit's VS1053 driver forced to compile with only WM8904 definitions 2014-07-18 15:35:12 -06:00
Gregory Nutt
1ff0536c7f WM8904: Add header file support for this forcoming driver 2014-07-18 13:28:51 -06:00
Gregory Nutt
cc09d75180 MXT driver: Fix error in thread test... backward logic 2014-07-16 22:13:41 -06:00
Gregory Nutt
44e6516213 maXTouch: Add thresholding so that MOVE reports are not generated unless there is a significant change in the reported position 2014-07-12 14:00:33 -06:00
Gregory Nutt
4548ea731e maXTouch: Fix error in state machine 2014-07-12 11:23:07 -06:00
Gregory Nutt
58ab6ec03f NX graphics library: Macroize some color operators that become trivial when there is only one color plane 2014-07-12 07:44:56 -06:00
Gregory Nutt
3042fc5bc0 Missing closing quote in Kconfig file 2014-07-11 16:51:50 -06:00
Gregory Nutt
e91704c432 Minor Kconfig improvements 2014-07-11 16:25:35 -06:00
Gregory Nutt
ab1ab379dd Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL 2014-07-11 16:19:17 -06:00
Gregory Nutt
8516551e54 Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete) 2014-07-11 11:20:11 -06:00
Gregory Nutt
f97113c5ef SAMA5D4-EK: The maXTouch controller and test is now enabled by default in the NSH configuration 2014-07-10 08:42:25 -06:00
Gregory Nutt
3b0a797216 MXT driver works 2014-07-10 07:16:38 -06:00
Gregory Nutt
22fbcbb852 MXT driver is now at least partially functional 2014-07-09 18:56:53 -06:00
Gregory Nutt
e9362128bd SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
0da9aaeb09 Fix some recurring typos: postion->position, *atino->*ation 2014-07-08 13:12:36 -06:00
Gregory Nutt
25f419d487 MXT Driver: Make sure that all return values are checked: Fix worker thread -- it must hold the MXT device semaphore to access I2C 2014-07-08 08:55:43 -06:00
Gregory Nutt
ab8506163a maXTouch: Fix some issues with interrupt handling 2014-07-07 13:25:20 -06:00
Gregory Nutt
5bbc0a0dd9 maXTouch: Check for successful memory allocation was backward 2014-07-07 09:55:39 -06:00
Gregory Nutt
0d14befb88 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
dc7bcb0c1d BCH: Add configurable AES encryption support to block-to-character (BCH) driver. This allows any block device to be accessed as an encrypted character device. From Max Nekludov 2014-07-07 08:00:00 -06:00
Gregory Nutt
09d0e2bdd2 maXTouch: Be consistent. Failure return values are not just non-zero, but negative 2014-07-06 09:08:38 -06:00
Gregory Nutt
4afc23d16d maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
b4d3cebc2f maXTouch: Fix I2C address, errors when debug enable, reorganize some data 2014-07-06 08:03:34 -06:00
Gregory Nutt
c5fc24e110 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
c2fc299332 Forgot to add a file in the last commit 2014-07-05 11:57:03 -06:00
Gregory Nutt
3e9f29ba07 Add very basic support for the Atmel maXTouch touchscreen controller 2014-07-05 11:47:54 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
a6b39d1879 NET: in-progress change... don't use 2014-07-04 16:38:51 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
b732388fcb TSC2007: Cosmetic updates 2014-07-04 15:03:41 -06:00
Gregory Nutt
b36b29b4c3 SMARTFS: Increase some variables from uint16_t to uint32_t to handle larger device sizes. From Ken Pettit 2014-07-04 07:28:12 -06:00
Gregory Nutt
f881abe2da Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE was not selected and the SMART sector size was larger than the mtd device's block size (like it would be if using SMARTFS on larger flash devices). From Ken Pettit 2014-07-03 18:14:51 -06:00
Gregory Nutt
8e9df8ade0 NET: Misc naming clean-up 2014-07-02 17:23:25 -06:00
Gregory Nutt
400edda109 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
3b31e1ac80 SAMA5D4-EK: NSH configuration now has the RAMLOG enabled by default 2014-07-01 15:09:47 -06:00
Gregory Nutt
2630411332 RAMLOG: syslog_putc must set errno and return EOF on a failure 2014-07-01 15:09:07 -06:00
Gregory Nutt
3ee5b9209b Rename CONFIG_RAMLOG_CONSOLE_BUFSIZE to just CONFIG_RAMLOG_BUFSIZE 2014-07-01 12:00:40 -06:00
Gregory Nutt
77330679d4 NET: Rename uip_mss to tcp_mss 2014-06-30 19:09:23 -06:00
Gregory Nutt
b0c1b7ef47 Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
da7379ed18 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
dd8bb71cbc Remove empty ADC write method. From Kosma Moczek 2014-06-30 07:55:28 -06:00
Gregory Nutt
f1dcb6674a Extend erase block size to 18-bits in order (decrease block size to 14-bits) to handle parts with large erase blocks. From Kosma Moczek 2014-06-30 07:52:57 -06:00
Gregory Nutt
ed1aa8c594 E1000: Rename uip_dev to netdev 2014-06-29 13:03:19 -06:00
Gregory Nutt
fce2a79abd Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00