Reason for use sw-interrupt as syscall interrupt:
The xtensa `syscall` instruction can cause SYSCALL interrupt.
But SYSCALL interrupt is same interrupt level with level-one
interrupt.
Nuttx swint can enter `enter_critical_section` and gerenate
interrupt.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
For up_irq_disable, use XCHAL_EXCM_LEVEL
For up_irq_save, use XCHAL_IRQ_LEVEL.
Then we can use svcall in enter_crritical_section.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
Reason: xtensa svcall only have level-1 interrupt level.
Sush do not generate interrupt when up_irq_save.
Software int can generate interrupt when up_irq_save.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
heap.
QEMU had a different ROM image that used the regions of PRO CPU for both
CPUs. This was causing crashes when running SMP mode as the heap was
being corrupted when the APP CPU starts.
QEMU is now loading the same image as the hardware chip and thus this
special case doesn't exist anymore.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
SCOMPARE1 is used by some atomic instructions and need to be preserved
during a context switch.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Up_getsp may be not inline in gcc, thus get the sp
is up_getsp function's sp, not the caller function.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
The name used in Tensilica support file core-isa.h for all vendors is
`XCHAL_NUM_INTLEVELS`.
Use a new name may be confused by newer porting xtensa arch.
Change-Id: Ie108d3fdfcc02c81f0eacfca852a1cfc9eea17de
The PRO CPU and APP CPU have different peripherals for GPIO interrupts.
Each CPU needs to allocate an interrupt and attach it to its GPIO
peripheral.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Consider follow coprocessor configuration case:
\#define XCHAL_CP_NUM 1 /* number of coprocessors */
\#define XCHAL_CP_MAX 2 /* max CP ID + 1 (0 if none) */
\#define XCHAL_CP_MASK 0x02 /* bitmask of all CPs by ID */
\#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
\
\#define XCHAL_CP1_NAME "AudioEngineLX"
\#define XCHAL_CP1_IDENT AudioEngineLX
\#define XCHAL_CP1_SA_SIZE 208 /* size of state save area */
\#define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */
\#define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */
In this case, XTENSA_CP_ALLSET is 0x1, but valid coprocessors
bitmap is 0x2, use marco XCHAL_CP_MASK instead, it is bitmap of all
vaild coprocs.
Change-Id: I63ec01e4bd0cbafc62d56636cc11bdc4a2f7857f
Many duplicate code when more chips add-in,
follow arch/arm/include/irq.h method, use chip/irq.h instead.
Change-Id: I42f516c1dda68e973939c669f627c457cd0bc65e
Some toolchain such as xtensa-xcc is unrecognize with constraint letter 'I',
letter 'i' is more common in GNU assembler.
Change-Id: I00f6a33fd7a5f2b95508c683e9954d402b68755f
Summary:
- I noticed that DEBUGASSERT sometimes happens in nxsem_wait()
when testing Wi-Fi with esp32-devkitc:wsifi_smp
- The call stack was not from an interrupt handler and actually
g_current_regs[] were correct, even though asserted with
(up_interrupt_handler() == false)
- Finally, I found that we need to call rsync after we set
a new value to the PS register which is described in the
Xtensa document.
- This commit fixes this issue
Impact:
- All xtensa architectures
Testing:
- Tested with esp32-devkitc:wifi_smp and esp32-devkitc:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
is enabled.
That region is technically part of the PRO CPU and we should be able to
allocate it early. However, QEMU uses a slightly different bootloader
image that uses the same part for both CPU. So, when APP CPU starts
during the SMP bring up it will corrupt some data.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Internal heap was occupying the region straight after .data up to
HEAP_REGION1. The issue with this is if static allocation is large,
we'll end up with too little memory left for the internal heap.
Moving it to the beginning of region 2 gives us more room to play with.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
like other related macro(e.g. INTMAX_MIN, INTMAX_MAX...)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8863599960b1a9b1c22ae9c35735a379a4c745b0
I skipped the following files because they were not simple.
I'll create separate PRs.
arch/xtensa/src/esp32/esp32_cpustart.c
arch/xtensa/src/common/xtensa_abi.h
boards/xtensa/esp32/esp32-core/include/board.h
Also, I skipped the following files and directories because
they looked too huge and/or foreign.
arch/xtensa/include/esp32/tie.h
arch/xtensa/include/xtensa/xtensa_corebits.h
arch/xtensa/src/esp32/hardware/
arch/xtensa/include/esp32/tie-asm.h
arch/xtensa/include/esp32/core-isa.h
arch/xtensa/include/xtensa/core.h
I also fixed a few "is is" style typos when unwrapping long lines.
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG. The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
