Gregory Nutt
|
4d07c15932
|
Add OV2640 camera support to test the SAMA5 ISI peripheral
|
2013-12-09 10:51:22 -06:00 |
|
Gregory Nutt
|
ae044a485c
|
pcDuino: More changes to get the code fragments that are in place building successfully
|
2013-12-07 16:44:23 -06:00 |
|
Gregory Nutt
|
22fefb59da
|
Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
|
2013-12-07 14:25:35 -06:00 |
|
Gregory Nutt
|
7b6b2bbd7c
|
Minor updates to comments and README files
|
2013-12-07 07:00:48 -06:00 |
|
Gregory Nutt
|
08e027b42f
|
SAMA5 NAND: bugfixes
|
2013-12-06 11:34:29 -06:00 |
|
Gregory Nutt
|
692b087d07
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
Gregory Nutt
|
422b225401
|
Cosmetic updates to comments and READMEs
|
2013-12-04 16:41:45 -06:00 |
|
Gregory Nutt
|
ae01f868b2
|
SAMA5 NAND: Fix some PMECC setup logic
|
2013-12-04 11:56:56 -06:00 |
|
Gregory Nutt
|
68ccbc0855
|
Add drivers/mtd/README.txt
|
2013-12-04 07:46:10 -06:00 |
|
Gregory Nutt
|
80841d135d
|
SAMA5 NAND: Updated README and configuration logic
|
2013-12-03 14:32:59 -06:00 |
|
Gregory Nutt
|
e90d6cf262
|
Updated README
|
2013-12-03 13:26:09 -06:00 |
|
Gregory Nutt
|
2318531d93
|
Condition out most of the recent NXFFS changes for NAND. NXFFS will never be able to support NAND
|
2013-12-03 13:11:11 -06:00 |
|
Gregory Nutt
|
875b49913a
|
SAMA5 NAND: Only CS3 can have NAND
|
2013-12-03 06:59:22 -06:00 |
|
Gregory Nutt
|
0d8ac38e59
|
SAMA5D3x-EK: Cosmetic improvements to the NOR boot printfs; updated README
|
2013-12-02 17:22:55 -06:00 |
|
Gregory Nutt
|
5b9d07e5c0
|
NXFFS: When dumping the MTD content, don't abort on a read error. For NAND, the read error probably just means that an uncorrectable ECC was encountered
|
2013-12-01 20:17:09 -06:00 |
|
Gregory Nutt
|
5f76fe9cb4
|
SAMA5 NAND: Basic NAND access now work (software ECC and no DMA)
|
2013-12-01 18:21:41 -06:00 |
|
Gregory Nutt
|
360a451268
|
ViewTool STM32F107: Basic NSH checks out okay
|
2013-12-01 10:05:40 -06:00 |
|
Gregory Nutt
|
c777f90b8a
|
Costmet updates, naming, debug output, README file
|
2013-12-01 07:39:20 -06:00 |
|
Gregory Nutt
|
5978e04411
|
ViewTool STM32F107: Add support for on-board LEDs and buttons
|
2013-11-30 14:15:15 -06:00 |
|
Gregory Nutt
|
22fb787c86
|
Basic board support for the ViewTool STM32F103/F107 board
|
2013-11-30 12:14:15 -06:00 |
|
Gregory Nutt
|
706292f417
|
More changes for a clean ez80 KITG build
|
2013-11-29 16:12:59 -06:00 |
|
Gregory Nutt
|
25f7e45708
|
Make naming consistent for USB host initialiation functions
|
2013-11-29 14:31:44 -06:00 |
|
Gregory Nutt
|
4c7cc446c1
|
LPC31 EHCI: Verified that driver works with keyboard (low-speed, interrupt endpoints)
|
2013-11-29 14:31:42 -06:00 |
|
Gregory Nutt
|
2d1408e3e1
|
examples/hidkbd now expects an architecture-specific USB HOST initialization function
|
2013-11-29 14:31:40 -06:00 |
|
Gregory Nutt
|
5a29e41ed9
|
examples/hidkbd now expects an architecture-specific USB HOST initialization function
|
2013-11-29 14:31:38 -06:00 |
|
Gregory Nutt
|
02d05de4b2
|
examples/hidkbd no expects an architecture-specific USB HOST initialization function
|
2013-11-29 14:31:34 -06:00 |
|
Gregory Nutt
|
78936f7260
|
Changes for ZDS-II ez80 build
|
2013-11-28 17:47:03 -06:00 |
|
Gregory Nutt
|
f171394ba9
|
STM32F429I-Discovery: Add support for external SST25 FLASH. From Ken Pettit
|
2013-11-28 08:21:15 -06:00 |
|
Gregory Nutt
|
afb0209207
|
LPC31 EHCI: Seems to work after re-ordering some initialization logic
|
2013-11-27 13:14:23 -06:00 |
|
Gregory Nutt
|
5fb0062d2d
|
SAMA5 NAND: A few bug fixes for integration. Still lots more to do
|
2013-11-27 11:04:40 -06:00 |
|
Gregory Nutt
|
ac275259bd
|
SAMA5 NAND: Fix some DMA related issues
|
2013-11-27 07:37:42 -06:00 |
|
Gregory Nutt
|
45a4eba015
|
SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support
|
2013-11-25 12:10:24 -06:00 |
|
Gregory Nutt
|
d2ce5423cd
|
Cosmetic changes
|
2013-11-22 13:36:07 -06:00 |
|
Gregory Nutt
|
eba19bef85
|
LPC3131 EHCI: More fixes
|
2013-11-21 16:39:49 -06:00 |
|
Gregory Nutt
|
c282733058
|
LPC-H3131: SDRAM comments updated
|
2013-11-21 14:47:37 -06:00 |
|
Gregory Nutt
|
37591022ca
|
LPC-H3131: SDRAM timing update. Still does not work
|
2013-11-21 14:46:49 -06:00 |
|
Gregory Nutt
|
68c964e3e2
|
LPC-H3131 SDRAM: Fix some build issues
|
2013-11-21 12:45:42 -06:00 |
|
Gregory Nutt
|
38042f641a
|
LPC-H3131: SDRAM support (untested)
|
2013-11-21 06:37:50 -06:00 |
|
Gregory Nutt
|
dace1ec4b0
|
Olimex LPC-H3131: Some restructuring of intialization logic
|
2013-11-20 17:01:34 -06:00 |
|
Gregory Nutt
|
22378d66c5
|
lpc31 ECHI. Early debug changes
|
2013-11-20 16:24:10 -06:00 |
|
Gregory Nutt
|
9e804749e9
|
Olimex LPC-H3131: Drop loops-per-second by a factor of 4. Why is the H3131 only 25% as fast as the EA3131 at the same clocking?
|
2013-11-19 15:54:23 -06:00 |
|
Gregory Nutt
|
c9c6d0c0d1
|
Olimex LPC_H3131: Add GPIO support for LEDs and for USB host power enable and overcurrent detection.
|
2013-11-19 15:52:10 -06:00 |
|
Gregory Nutt
|
9986d22e19
|
Updated README
|
2013-11-18 19:07:49 -06:00 |
|
Gregory Nutt
|
6cded05be3
|
Add .gitignore files; update a README
|
2013-11-18 15:38:04 -06:00 |
|
Gregory Nutt
|
a184224660
|
Add support for the Olimex LPC-H3131 board
|
2013-11-18 14:51:38 -06:00 |
|
Gregory Nutt
|
7ccbbe07cb
|
Further NAND development
|
2013-11-16 11:46:35 -06:00 |
|
Gregory Nutt
|
c7657c9c5e
|
EA3131: Framework for USB host support
|
2013-11-15 15:56:24 -06:00 |
|
Gregory Nutt
|
e53ba01b64
|
Add support for ONFI compatible NAND devices (NAND logic still incomplete)
|
2013-11-15 14:11:21 -06:00 |
|
Gregory Nutt
|
897572a552
|
Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h
|
2013-11-15 11:22:23 -06:00 |
|
Gregory Nutt
|
121de26583
|
SAMA5 NAND: Basic support for access to NAND FLASH
|
2013-11-15 09:30:05 -06:00 |
|
Gregory Nutt
|
b3faf95a7c
|
LPC31: Configuration and build support for a forthcoming USB host driver; configs/ea3131/nsh converted to use kconfig-frontend tools
|
2013-11-14 15:33:43 -06:00 |
|
Gregory Nutt
|
bc58422444
|
STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file
|
2013-11-14 08:29:36 -06:00 |
|
Gregory Nutt
|
7de422a42c
|
README update
|
2013-11-12 17:15:27 -06:00 |
|
Gregory Nutt
|
5e4d01f626
|
SAMA5D3x-EK updated README
|
2013-11-12 17:00:37 -06:00 |
|
Gregory Nutt
|
794b38d220
|
SAMA5D3x-EK Kconfig: There is no 'else'
|
2013-11-12 10:20:33 -06:00 |
|
Gregory Nutt
|
a29e6f93f8
|
Updated SAMA5D3x-EK README file
|
2013-11-11 16:17:13 -06:00 |
|
Gregory Nutt
|
f23b82f9b2
|
SAMA5D3x-EK: Add support for the apps/examples/i2schar test
|
2013-11-11 15:17:37 -06:00 |
|
Gregory Nutt
|
f7f5923d9d
|
Freedom KL25Z: Add PWM support. From Alan Carvalho de Assis
|
2013-11-10 10:39:03 -06:00 |
|
Gregory Nutt
|
4216e66fc7
|
STM32F429I-Discovery: Add support for the usbnsh and usbmsc configurations using the OTG HS peripheral in FS mode. From Ken Pettit.
|
2013-11-10 07:30:34 -06:00 |
|
Gregory Nutt
|
2a1de6af07
|
SAMA5D3x-EK README: Add description of WM8904 CODEC
|
2013-11-10 07:16:43 -06:00 |
|
Gregory Nutt
|
f32dc8426b
|
Updated Spark README from David Sidrane
|
2013-11-08 16:38:16 -06:00 |
|
Gregory Nutt
|
84876022a5
|
Spark: move CDC/ACM .inf Windows driver files into the spark/scripts directory
|
2013-11-08 16:25:44 -06:00 |
|
Gregory Nutt
|
4171db9da2
|
Add an apps/examples/usbserial configuration for the Spark. From David Sidrane
|
2013-11-07 18:31:08 -06:00 |
|
Gregory Nutt
|
78a239f79e
|
Add CDC/ACM serial driver for the Spark composite configuration
|
2013-11-07 17:39:13 -06:00 |
|
Gregory Nutt
|
55b592faf8
|
Add support for the STM32F429I-Discovery board from Ken Pettit
|
2013-11-07 16:55:45 -06:00 |
|
Gregory Nutt
|
e231270215
|
SAMA5 PWM: PWM driver is now functional
|
2013-11-07 09:17:46 -06:00 |
|
Gregory Nutt
|
3aa348035d
|
SAMA5D3x-EK: Add support board-specific PWM testing
|
2013-11-06 14:38:19 -06:00 |
|
Gregory Nutt
|
7394517bab
|
NSH library: Allow USB trace without a USB console
|
2013-11-06 07:09:00 -06:00 |
|
Gregory Nutt
|
21159573b4
|
Updated spark configuration from David Sidrane
|
2013-11-05 09:15:50 -06:00 |
|
Gregory Nutt
|
b2f4454ccf
|
Fix typo introduced (by me) in the last large set of changes from Ken Pettit
|
2013-11-04 10:49:36 -06:00 |
|
Gregory Nutt
|
120075577f
|
configs/mikroe-stm32f4/fulldemo updated by Ken Pettit
|
2013-11-04 09:29:27 -06:00 |
|
Gregory Nutt
|
14b4fa3c72
|
configs/sim/configdata: MTD configuration data driver unit test. From Ken Pettit
|
2013-11-04 09:17:31 -06:00 |
|
Gregory Nutt
|
cad56c49ca
|
SAMA5 CAN: File that I forgot to add in a previous commit
|
2013-11-04 08:57:27 -06:00 |
|
Gregory Nutt
|
93aae8c2c5
|
SAMA5 CAN: Add board-specific initialization logic
|
2013-11-03 10:03:52 -06:00 |
|
Gregory Nutt
|
a2b6d12271
|
Fix to SST25 driver to permit faster write modes. From David Sidrane
|
2013-11-02 08:27:13 -06:00 |
|
Gregory Nutt
|
f3313a0f51
|
Spark config updates from David Sidrane
|
2013-11-02 08:11:41 -06:00 |
|
Gregory Nutt
|
2a215127a0
|
Configs update for SST25 SPI from Davide Sidrane
|
2013-11-02 08:07:39 -06:00 |
|
Gregory Nutt
|
21cf9ccb6d
|
Another updated to the spark configuration from David Sidrane
|
2013-11-01 12:42:49 -06:00 |
|
Gregory Nutt
|
0d0c3e66fb
|
Updates to sparck configuration from David Sidrane
|
2013-11-01 11:40:19 -06:00 |
|
Gregory Nutt
|
dae191ec3a
|
Updated spark configuration from David Sidrane, including new USB MSC configuration
|
2013-11-01 11:28:23 -06:00 |
|
Gregory Nutt
|
b102d01046
|
The Mikroe STM32 F4 board now uses /dev/config for configuration data storage. From Ken Pettit
|
2013-11-01 07:50:35 -06:00 |
|
Gregory Nutt
|
d677006a1e
|
Missing file that I forgot to add in the last commit
|
2013-10-30 18:11:54 -06:00 |
|
Gregory Nutt
|
35dd7b9203
|
Updated Spark board configuration from David Sidrane
|
2013-10-30 14:38:16 -06:00 |
|
Gregory Nutt
|
8c5fc5fa88
|
Spark configuration updated by David Sidrane
|
2013-10-30 10:29:51 -06:00 |
|
Gregory Nutt
|
1d5b786fa2
|
Minor changes while pondering a camera interface
|
2013-10-29 16:57:06 -06:00 |
|
Gregory Nutt
|
3fd4629bd7
|
SAMA5 ADC: Seems functional in all modes including DMA
|
2013-10-28 10:08:12 -06:00 |
|
Gregory Nutt
|
61e63181d7
|
configs/spark: Spark NSH configuration updated from David Sidrane
|
2013-10-27 18:53:43 -06:00 |
|
Gregory Nutt
|
13ec431d75
|
SAMA5 README update
|
2013-10-27 11:09:53 -06:00 |
|
Gregory Nutt
|
376652f293
|
Updated Mikroe STM32F4 configuration from Ken Pettit
|
2013-10-27 08:06:39 -06:00 |
|
Gregory Nutt
|
4dcba6d538
|
configs/spark: Spark configuration update from David Sidrane
|
2013-10-26 17:41:23 -06:00 |
|
Gregory Nutt
|
ad3539209b
|
Updated Spark board configuration from David Sidrane
|
2013-10-25 15:51:38 -06:00 |
|
Gregory Nutt
|
1668aa408e
|
SAMA5 ADC+TC: Early debug fixes + lots of new debug instrumentation
|
2013-10-24 16:50:51 -06:00 |
|
Gregory Nutt
|
28d50790f2
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
Gregory Nutt
|
18e651b670
|
KL25: Update build for compatibility with recent CC3000 changes
|
2013-10-24 13:59:53 -06:00 |
|
Gregory Nutt
|
21c59c0aa7
|
Added support for the Olimex STM32 P207 board. From Martin Lederhilger
|
2013-10-24 08:48:04 -06:00 |
|
Gregory Nutt
|
d6dee94aa2
|
apps/examples/can: Fix an error in a debug statement. From Martin Lederhilger
|
2013-10-24 08:14:33 -06:00 |
|
Gregory Nutt
|
da5333663f
|
Spark configuration update from David Sidrane
|
2013-10-24 08:03:07 -06:00 |
|
Gregory Nutt
|
e5b093cd3a
|
Remove carriage returns from SAMA5 TC files just commited
|
2013-10-23 15:39:00 -06:00 |
|
Gregory Nutt
|
76764003a5
|
Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y
|
2013-10-23 11:48:57 -06:00 |
|
Gregory Nutt
|
69e49938f0
|
SAMA5 CAN: Update readme on how to configure CAN
|
2013-10-23 11:32:12 -06:00 |
|
Gregory Nutt
|
212b5f504c
|
Changes to the Spark configuration from David Sidrane
|
2013-10-23 08:37:16 -06:00 |
|
Gregory Nutt
|
06c87638ae
|
SAMA5 demo configuration: TRNG and /dev/random are now enabled
|
2013-10-20 12:16:17 -06:00 |
|
Gregory Nutt
|
0ebdbfbc88
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
Gregory Nutt
|
5316b1755f
|
SAMA5 norboot configuration updates
|
2013-10-20 08:46:52 -06:00 |
|
Gregory Nutt
|
b5a22632d7
|
SAMA5 norboot configuration updates
|
2013-10-20 08:44:07 -06:00 |
|
Gregory Nutt
|
cc4c4f4593
|
SAMA5 WDT: Miss watchdog fixes
|
2013-10-20 08:24:05 -06:00 |
|
Gregory Nutt
|
13ab1b586d
|
Updated README
|
2013-10-19 12:37:14 -06:00 |
|
Gregory Nutt
|
9e8bc003e5
|
Add instructions to enable RTC in the nsh/ configuration; RTC enabled by default in the demo configuration
|
2013-10-19 10:38:23 -06:00 |
|
Gregory Nutt
|
6fda497bc1
|
Updated Spark/cc3000 files from David Sidrane
|
2013-10-18 17:14:58 -06:00 |
|
Gregory Nutt
|
d72a99bc64
|
SAMA5 LCD: Move framebuffers to center of free memory region. That creates a guard band around the framebuffers that gives a little protection from any bad writes into the framebuffer
|
2013-10-18 10:11:20 -06:00 |
|
Gregory Nutt
|
0e53acfb24
|
Make sure that CONFIG_SDIO_PEFLIGHT=y is set in all STM32 configurations that have SDIO DMA enabled
|
2013-10-18 08:57:59 -06:00 |
|
Gregory Nutt
|
0e8617c1d2
|
Minor tweaks to debug output; started renaming some icons to include size in the name; SAMA5 NxWM config needs libm
|
2013-10-17 15:19:26 -06:00 |
|
Gregory Nutt
|
8ad32012ab
|
New touchscreen scaling algorithm for the case where measured X values vary with y position (and vice versa)
|
2013-10-17 12:07:14 -06:00 |
|
Gregory Nutt
|
58455b46ab
|
Spark configuration updates from David Sidrane
|
2013-10-16 08:20:57 -06:00 |
|
Gregory Nutt
|
e7428e9cbc
|
Spark configuration updates from David Sidrane
|
2013-10-16 07:55:04 -06:00 |
|
Gregory Nutt
|
6d3bb7f51c
|
SAMA5D3x-EK NxWM configuration: use 320x320 NuttX logo as the background
|
2013-10-15 16:11:33 -06:00 |
|
Gregory Nutt
|
96885a3afd
|
Use NxWidgets::CScaledBitmap to scale icons in the NxWM taskbar
|
2013-10-15 14:29:06 -06:00 |
|
Gregory Nutt
|
b8df3a7e91
|
NxWM::CCalibration: Add logic to collect and average samples, optionally discarding the most extreem values
|
2013-10-14 18:35:23 -06:00 |
|
Gregory Nutt
|
87d8d3a7d5
|
Misc changes to README files; Update SAMA5D3x-EK NxWM configuration to use Calibration instruction messages
|
2013-10-14 14:53:38 -06:00 |
|
Gregory Nutt
|
d19eb19af4
|
SAMA5D3x-EK: Add NxWM configuration for the SAMA5D3x-EK boards
|
2013-10-13 18:49:32 -06:00 |
|
Gregory Nutt
|
63269035a7
|
SAMA5D3x-EK: Enable simulated mouse and keyboard events in the NX configuration
|
2013-10-13 13:59:39 -06:00 |
|
Gregory Nutt
|
fa71c8211c
|
SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported
|
2013-10-13 13:08:05 -06:00 |
|
Gregory Nutt
|
3cfe4c2113
|
SAMA5 LCDC: Move framebuffer to lower memory; I suspect some corruption by interference
|
2013-10-13 10:42:14 -06:00 |
|
Gregory Nutt
|
02f7c5d8d5
|
SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes
|
2013-10-11 17:12:35 -06:00 |
|
Gregory Nutt
|
e9187d3199
|
SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work)
|
2013-10-10 18:44:08 -06:00 |
|
Gregory Nutt
|
de5ae1a584
|
SAMA5 LCDC: Default resolution if now RGB565; Add option to select a different output resolution than the sofware resolution (needs to the 24BPP for this LCD).
|
2013-10-10 18:41:42 -06:00 |
|
Gregory Nutt
|
b641545f93
|
SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM
|
2013-10-10 12:02:41 -06:00 |
|
Gregory Nutt
|
98410588e8
|
Arduino Due: RXD0 pull-up works with both REV2 and REV3
|
2013-10-10 07:11:13 -06:00 |
|
Gregory Nutt
|
ff64ccb539
|
SAMA5 LCDC: Corrections from first debug sessions. Still a way to go
|
2013-10-09 13:21:27 -06:00 |
|
Gregory Nutt
|
3b6e63199a
|
Add option to enable Aduino Due specific logic, like pull-up on UART0 RXD. Suggested by gdi@embedders.org
|
2013-10-09 07:35:00 -06:00 |
|
Gregory Nutt
|
0b9b77067e
|
Cosmetic change; removal of spaces at the end of lines
|
2013-10-09 07:30:39 -06:00 |
|
Gregory Nutt
|
baf1353743
|
SAMA5: Add an examples/nx configuration for testing the LCD
|
2013-10-08 16:52:21 -06:00 |
|
Gregory Nutt
|
f8397f8238
|
SAMA5: LCDC driver incorporated into the build system.
|
2013-10-08 15:30:38 -06:00 |
|
Gregory Nutt
|
ed980b51f7
|
SAMA5: LCDC driver progress
|
2013-10-07 12:05:16 -06:00 |
|
Gregory Nutt
|
9d6bfb5238
|
SAMA5: ADC and touchscreen drivers now build without errors
|
2013-10-03 14:32:21 -06:00 |
|
Gregory Nutt
|
a4123ed6d5
|
SAMA5: Integrate touchscreen and ADC drivers into the build
|
2013-10-03 12:49:13 -06:00 |
|
Gregory Nutt
|
97a4ecb306
|
SAMA Touchscreen/ADC: More progress
|
2013-10-02 16:55:22 -06:00 |
|
Gregory Nutt
|
fee65851ca
|
Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations
|
2013-10-02 08:24:46 -06:00 |
|
Gregory Nutt
|
e92ed407aa
|
SAMA5 ADC/Touchscreen: A little more logic
|
2013-10-01 14:40:34 -06:00 |
|
Gregory Nutt
|
647aff0ded
|
Changes to NSH and readline to permit NSH to work on a platform with no file system
|
2013-09-30 11:34:04 -06:00 |
|
Gregory Nutt
|
50123bd30f
|
Add freedom-kl25z/minnsh configuration: This is an experiment to see just how small we and get an NSH configuration. From Alan Carvalho de Assis.
|
2013-09-30 09:20:11 -06:00 |
|
Gregory Nutt
|
0a1a68b77a
|
KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis
|
2013-09-30 09:15:31 -06:00 |
|
Gregory Nutt
|
417f67c132
|
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
|
2013-09-28 16:50:07 -06:00 |
|
Gregory Nutt
|
1f88a2907c
|
The last checkin replaced some impossible error handling with DEBUGASSERT. Except that one of the case is actually possible in one cornercase and had to be restored
|
2013-09-28 15:37:16 -06:00 |
|
Gregory Nutt
|
41f0c86cad
|
Optimized sendfile() from Max Holtzberg
|
2013-09-28 14:47:49 -06:00 |
|
Gregory Nutt
|
cc0128183a
|
SAMA5: Update README.txt to show how to configure GMAC
|
2013-09-27 16:58:25 -06:00 |
|
Gregory Nutt
|
7b9b7cbdec
|
configs/compal_e88 converted to use the kconfig-frontends tools
|
2013-09-27 16:12:44 -06:00 |
|
Gregory Nutt
|
d6503f4dd2
|
Add support for the Motorola C139 phone
|
2013-09-27 15:11:31 -06:00 |
|
Gregory Nutt
|
fde6c30ac2
|
ZIT-ARM-1769: Led to LED control logic from Raashid Fatah
|
2013-09-26 07:15:52 -06:00 |
|
Gregory Nutt
|
b3ecd158ac
|
Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested
|
2013-09-25 18:50:14 -06:00 |
|