Gregory Nutt
12e3e47d3c
Update comments, mostly spelling errors.
2018-01-27 09:37:46 -06:00
Gregory Nutt
23c6debc63
configs/flipnclick-sam3x: Update README and comments to discuss I2C access on all mikroBUS connectors.
2018-01-25 13:33:09 -06:00
Gregory Nutt
483dfe80d9
configs/flipnclick-pic32mz and flipnclick-sam3x: Update README and add pin definitions to support SPI on all mikroBUS connectors.
2018-01-25 12:45:02 -06:00
Gregory Nutt
633e90225e
configs/flipnclick-sam3x (also Arduio-Due): Remove disabling of environmont, mountpoints, and poll. Add NSH arch initialization so that procfs will be automounted. Increase task name size from 0 to 32. Update README.
2018-01-25 10:37:16 -06:00
Gregory Nutt
cafb527262
configs/flipnclick-sam3x: Using JTAG (vs. Bossac) I was finally able to load code and verify the basic NSH configuration. Updated READMEs. Also switched to USART0 (vs UART0) for the serial console because I was not getting bi-directional communication on the VCOM.
2018-01-24 08:52:40 -06:00
Gregory Nutt
82cb799bb6
net/udp: Fix memory leak with UDP + write buffer is closed. Also update TODO and comments and refresh a configuration.
2018-01-23 11:54:03 -06:00
David Alessio
6ae6ecc958
Merged in david_alessio/nuttx/refactor-pll-setup (pull request #581 )
...
Refactor pll setup
* fix typo in #def
* refactor PLL setup code...
* refactored PLL/CLK config, easier, checks for correctness
* call go_os_start if STACK_COLORIZED
* smarter config of EXTCLK output freq
* cosmetic
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-22 13:20:35 +00:00
Fanda
460d362eb7
Merged in fvacek/nuttx (pull request #580 )
...
NUCLEO F432KC typo fixed, correct name is L432KC
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-21 18:28:47 +00:00
Mateusz Szafoni
5af7e3de2a
Merged in raiden00/nuttx (pull request #579 )
...
Master
* stm32_hritm: add interface to get timer clock frequency
stm32_hrtim: fix timer freq calculation
stm32_hrtim: add compar/capture registers significant bits checking
stm32_hrtim: minor changes
* stm32f334-disco: add buck converter and boost converter logic
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-21 18:28:09 +00:00
Fanda Vacek
9916ca89e6
NUCLEO F432KC typo fixed, correct name is L432KC
...
Just README.txt and comments affected, no changes in the code
2018-01-21 19:06:22 +01:00
Gregory Nutt
f153df28d3
configs/nucleo-l432kc: Fix numerous cloning errors/typos.
2018-01-20 16:16:35 -06:00
Fanda Vacek
d0ae325c15
Issue #85 : /dev/userleds is not working for nucleo-l432kc fixed
2018-01-20 23:02:34 +01:00
Gregory Nutt
e8e8914cab
Documentation: Fix copy/paste error in NX graphics document. Noted by Henjiu Kang.
2018-01-20 07:11:33 -06:00
Gregory Nutt
ff8cdcc89f
configs/lpcxpresso-lpc54628: Update README
2018-01-18 11:14:54 -06:00
Gregory Nutt
c0a343a6f0
configs/lpcxpresso-lpc54628/lvgl: Add LittlevGL graphics demo configuration.
2018-01-18 10:00:27 -06:00
Gregory Nutt
ce7df1f961
configst/stm3240g-eval: Remove only bogus logic to start the NX server. That was there only to support the knxwm configuration and was implemented priorit to boardctl(BOARCIOC_NX_START).
2018-01-18 06:57:38 -06:00
Masayuki Ishikawa
0184f8818a
Merged in masayuki2009/nuttx.nuttx/lc823450_fixes (pull request #576 )
...
lc823450 fixes
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-18 12:32:41 +00:00
Masayuki Ishikawa
0fa630d29d
configs/lc823450-xgevk: Update README.txt and defconfigs
...
Update comments on SMP in README.txt
Enable SYSTEM_TIME64 in defconfigs.
Enable INSTRUMENTATION in rndis configuration.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-18 14:02:39 +09:00
Gregory Nutt
d481ac347d
configs: Both CONFIG_LIB_BOARDCTL=y and CONFIG_BOARD_INITIALIZE=y is not meaningful in the standalone NxWM. CONFIG_LIB_BOARDCTL=y is the better option so CONFIG_BOARD_INITIALIZE=y removed from these configurations.
2018-01-17 13:51:29 -06:00
Gregory Nutt
6deebac4ae
configs: There should be either CONFIG_LIB_BOARDCTL=y or CONFIG_BOARD_INITIALIZE=y in the defconfig of every standalone NxWM configuration to assure that all of the board resources are initialized... especially the touchscreen since it it now a part of the board driver initialization.
2018-01-17 12:12:07 -06:00
Gregory Nutt
c456b87dcd
configs: CONFIG_MAX_TASKS muast be a power of 2
2018-01-17 10:54:39 -06:00
Gregory Nutt
43390c78ea
configs: Since the touch screen initialization is now called from one-time board-initialization logic, it no longer needs protection from re-entry.
2018-01-17 10:14:03 -06:00
Gregory Nutt
301bf1ee77
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
...
Squashed commit of the following:
configs: Each board now initializes the touchscreen controller as a normal part of its board bring-up. board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
Remove all support for BOARDIOC_TSCTEST_SETUP
Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
2018-01-17 09:33:28 -06:00
Gregory Nutt
e276d4d16d
Remove the BOARDIOC_TSCTEST_TEARNDOWN boardctl() command. Remove all implementations of board_tsc_teardown() (the were all stubs anyway except for the simulation).
2018-01-16 18:03:21 -06:00
Fanda
53db5c80f3
Merged in fvacek/nuttx (pull request #572 )
...
Fixed nucleo-l432kc broken build when CONFIG_USERLED_LOWER defined
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-16 23:33:58 +00:00
Gregory Nutt
c67de1f114
configs/lpcxpresso-lpc54628: Add pin definitions for USART, I2C, and SPI on the Arduino Uno connector.
2018-01-16 11:48:36 -06:00
Juha Niskanen
802f146781
configs/nucleo-* and configs/stm32l476vg-disco: Fix more stm32_userleds.c bogus logic
2018-01-16 07:20:41 -06:00
Gregory Nutt
a30ccce7ce
configs/nucleo-l432kc/src: Fix some bogus logic noted by Fanda.
2018-01-15 18:22:29 -06:00
Gregory Nutt
8f94ce46f9
arch/arm/src/lpc54xx: The basic SPI driver is code complete but still untested. This driver is 'basic' in that in only supports polled mode operations.
2018-01-14 12:09:26 -06:00
Gregory Nutt
fdf4e40b6a
configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations.
2018-01-13 08:34:58 -06:00
Gregory Nutt
0eca2c6fef
Update README files
2018-01-11 07:28:12 -06:00
Masayuki Ishikawa
48b7f9b807
configs/lc823450-xgevk: Update defconfigs
...
Apply the latest Kconfig to all configurations.
Enable DVFS in audio and rndis. Add telnet character mode to rndis.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-10 16:16:03 +09:00
Masayuki Ishikawa
5029aa7e8c
configs/lc823450-xgevk: Enable DVFS in lc823450_bringup.c
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-10 16:16:00 +09:00
Masayuki Ishikawa
ea19abd291
configs/lc823450-xgevk: Update README.txt
...
Add notes on DVFS (Dynamic Voltage and Frequencey Scaling)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2018-01-10 16:15:27 +09:00
Gregory Nutt
eef1276565
configs/stm32f103-minimum: Remove nonsensical #error.
2018-01-09 11:17:01 -06:00
Gregory Nutt
c367a223c5
Update README
2018-01-09 07:20:39 -06:00
Gregory Nutt
7d4451ee86
Squashed commit of the following:
...
configs/flipnclick-pic32mz: Switch the serial console to UART4. Clean up some minor issues the LED options.
configs/flipnclick-pic32mz: Add support for two on-board buttons: T1 and T2.
configs/flipnclick-pic32mz: Adds basic board support for the Mikroe Flip&Click PIC32MZ board. Initial commit is just the configs/pic32mz-starterkit with some name chanages.
2018-01-08 14:21:49 -06:00
Gregory Nutt
6fe1f5a96c
Squashed commit of the following:
...
arch/mips/src/pic32mz: Commits the basic architecture port for the PIC32MZEF.
arch/mips/src/pic32mz: Begin adding PIC32MZEF files. Initial commit are simply PIC32MZEC files with name changes.
arch/mips/include/pic32mz: Add support for the PIC32MZEF family.
2018-01-08 10:01:23 -06:00
Gregory Nutt
a0aec8ccde
configs/stm32f103-minimum: Add file that was included in the last patch.
2018-01-07 12:17:15 -06:00
Gregory Nutt
4227d11b6c
configs/flipnclick-sam3x: Update README and some comments.
2018-01-07 11:07:39 -06:00
Gregory Nutt
bc320c7878
configs/arduino-due and flipnclick-sam3x: Enable PROCFS in nsh configurations.
2018-01-06 17:54:48 -06:00
Alan Carvalho de Assis
20c11e918f
configs/stm32f103-minimum: Add AT24 EEPROM support on STM32F103-Minimum board
2018-01-06 17:10:32 -06:00
Gregory Nutt
ed18e427f3
Squashed commit of the following:
...
configs/flipnclick-sam3x: Add support for the 4 user-controllable LEDs on the board.
configs/flipnclick-sam3x: Add board support for the Mikroe Flip&Click SAM3X.
configs/arduino-due: Update this old configuration so that it is structured a little more like recent board support.
2018-01-06 17:06:50 -06:00
Gregory Nutt
0253c974b2
Squashed commit of the following:
...
fs/nxffs: Giving up on truncate() support in NXFFS for now. There is too much that has to be done to make that work.
configs/sim: Add support for testing NXFFS.
2018-01-06 13:32:32 -06:00
Gregory Nutt
17cedb6b20
Squashed commit of the following:
...
fs/smartfs: Add logic needed to ftruncate to shrink a file to any arbitrary size.
fs/smartfs: Repartition some functionality to better fit in new ftruncate features.
2018-01-06 10:43:18 -06:00
Gregory Nutt
c85bc9e941
configs/sim: Add support for a RAM MTD driver and initialization for use with SmartFS.
2018-01-05 13:54:37 -06:00
Gregory Nutt
5d1a91fd8e
configs/lpcxpresso-lpc5428/fb: Should disable pixel depths that are not being used.
2018-01-04 16:40:31 -06:00
Gregory Nutt
36cc4fc066
Fix saome warnings found in build testing.
2018-01-04 13:33:42 -06:00
Gregory Nutt
7d131fe711
Update TODO list
2018-01-03 08:32:57 -06:00
Gregory Nutt
e7db11fc55
arch/arm/src/lpc54xx: LPC54xx Ethernet driver no long depends on EXPERIMENTAL.
2018-01-02 11:17:25 -06:00
Gregory Nutt
d04f166d84
arch/arm/src/lpc54xx: Add some hooks for future 802.1q VLAN support. configs/lpcxpresso-lpc54628: Automatically bring up network in the netnsh configuration.
2018-01-02 08:49:09 -06:00
David Alessio
1be5d96c6e
Merged in david_alessio/nuttx/add-FPU-to-ostest (pull request #562 )
...
Add FPU to xmc4 ostest
* remove +x from makefiles
* preserve .gdbinit across make clean
* add FPU support to ostest on xmc4
* add FPU test to ostest on xmc4
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-01-02 13:35:26 +00:00
Gregory Nutt
c3d3e91a3f
arch/arm/src/lpc54xx: Correct handling of the Ethernet RBU error. With this fix, Ethernet now appears to be fully functional although still undertested.
2018-01-01 15:08:19 -06:00
Gregory Nutt
3c65be8c1a
arch/arm/src/lpc54xx: Fix a few more Ethernet issues related to buffer management and address filtering.
2018-01-01 08:54:31 -06:00
Gregory Nutt
fd10eaf1fb
arch/arm/src/lpc54xx: Fix several more issues in bring-up of Ethernet driver. Still not fully functional.
2017-12-31 17:16:21 -06:00
Gregory Nutt
f624c504d1
arch/arm/src/lpc54xx: Fixes a few more Ethernet bring up bugs. Rx seems to work; Tx does not.
2017-12-31 14:49:13 -06:00
Gregory Nutt
b2adb4917f
arch/arm/src/lpc54xx: Add register level debug output for Ethernet testing. Fixed a few start up problems. Still hangs on start-up, however.
2017-12-31 11:11:57 -06:00
Gregory Nutt
f23fb9dd14
arch/arm/src/lpc54xx: Completes basic packet transfer logic for Ethernet drivers. Still some unfinished logic for IPv6 multicast logic and for various non-mainstream configurations. But it is ready for tested. configs/lpcxpresso-lpc54628: Add a netnsh configuration that will be used to test the Ethernet driver. Untested on initial commit.
2017-12-30 12:51:57 -06:00
Gregory Nutt
cb9e1e7716
arch/arm/src/lpc54xx: Add some Ethernet PHY initialization logic.
2017-12-27 12:01:24 -06:00
Gregory Nutt
f5c5f89592
arch/arm/src/lpc54xx: Add (incomplete) Ethernet register definition file. Add framework for an Ethernet driver. Initial commit is just the drivers/skeleton.c with naming updated for the LPC54.
2017-12-26 12:55:58 -06:00
Gregory Nutt
edef041f93
arch/arm/src/lpc54xx: Add support for a random number generator.
2017-12-26 10:20:41 -06:00
Gregory Nutt
0b91074850
arch/arm/src/lpc54xx: Add an RTC driver and a RTC character driver lower half. configs/lpcxpresso-lpc54628: Add logic to register the RTC character driver if it is enabled. Enable the RTC and RTC character driver in the NSH configuration.
2017-12-25 13:56:06 -06:00
Gregory Nutt
7e7bdd181f
Cosmetic fixes to comments, README, and other trivial corrections.
2017-12-25 10:45:47 -06:00
Gregory Nutt
382989a1b9
arch/arm/src/lpc54xx: DMA driver is code compelete. Untested and still needs more review.
2017-12-24 14:28:39 -06:00
Gregory Nutt
321c524c5f
arch/arm/src/lpc54xx: Add DMA register definition file and skeletal DMA driver. The initial commit of the DMA driver is simply the LPC43xx GPDMA driver with name changes and all all register access removed.
2017-12-24 10:55:46 -06:00
Gregory Nutt
7ce881051a
lpc43/lpc54 SDMMC: Add missing test for response errors in interrupt handler.
2017-12-23 18:13:53 -06:00
Gregory Nutt
0a5d9af33c
lpc43/54 SDMMC: Remove some useless code. lpc54: Fix typos in the IOCON register definition file. Lpcxpresso-Lpc54628: Fix typols in board.h file
2017-12-23 14:25:21 -06:00
Alan Carvalho de Assis
fa234a7026
configs/bambino-200e: Add LPC43 SDMMC board support to Bambino-200E and fix errors/warns
2017-12-22 12:30:36 -06:00
Alan Carvalho de Assis
3ce21c5fe1
arch/arm/src/lpc43xx: Fix some small issues on LPC43 SDMMC driver
2017-12-22 10:23:09 -06:00
Gregory Nutt
c431177c0f
LPC54xx: Update a README; fix a error in a DEBUGASSERTION in the SDMMC driver.
2017-12-21 12:19:15 -06:00
Gregory Nutt
31db67cad7
arch/arm/src/lpc54xx: SDMMC pin configurations should have SLEW on and FILTER off.
2017-12-20 11:47:30 -06:00
Gregory Nutt
c867d42018
arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC.
2017-12-20 10:52:05 -06:00
Alan Carvalho de Assis
d66b2b0714
This commit adds support for stm32f072b-disco board. This is the board. I added the LEDs of this board and tested the compilation, more tests will be needed.
2017-12-20 08:05:15 -06:00
Alan Carvalho de Assis
87bd3cd8ff
Rename the configs/stm32f0discovery board directory to configs/stm32f051-discovery. There are others stm32f0discovery boards with different MCUs and different peripherals on the board.
2017-12-20 08:05:15 -06:00
Masayuki Ishikawa
c2e50351e4
Merged in masayuki2009/nuttx.nuttx/lc823450_http_streaming (pull request #560 )
...
lc823450 http streaming
* arch/arm/src/lc823450: Use spinlock APIs in lc823450_gpio.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Add a warning message in up_ack_irq()
In SMP mode, H/W interrupts should be handled on CPU0 to avoid deadlocks.
Other changes:
Fix a potential race condition in up_enable_irq()
Use spinlock APIs instead of critical section APIs.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Enable HRT_TIMER in lc823450_timerisr.c
Other changes:
Fix style violations and call up_enable_irq() to assign CPU0 for IRQ handling.
Use spinlock APIs instead of critical section APIs.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Fix race conditions in dma/usbdev.
In SMP mode, critical data must be protected explicitly.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Update README.txt
Add notes on .gdbinit and networking. Update comments on SMP.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Update defconfigs
Enable HRT_TIMER, LC823450_MTM0_TICK, SPINLOCK_IRQ
Enable NET_TCP_RWND_CONTROL, NXPLAYER_HTTP_STREAMING_SUPPORT (rndis only)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-20 13:33:06 +00:00
Gregory Nutt
793c8b785a
arch/arm/src/lpc54: Missed a change in the last commit
2017-12-19 15:11:22 -06:00
Gregory Nutt
321a7a64af
arch/arm/src/lpc54xx and configs/lpcxpresso-lpc54628: Correct some SD/MMC clock divider logic.
2017-12-19 14:05:36 -06:00
Gregory Nutt
93b28017ab
arch/arm/src/lpc54xx: Make the SPI driver selections EXPERIMENTAL since the SPI peripherals are not fully implemented.
2017-12-19 13:09:15 -06:00
Gregory Nutt
a8933f96bd
configs/lpcxpresso-lpc54628: Fix SD/MMC clock divisor.
2017-12-19 12:43:44 -06:00
Gregory Nutt
ba1301a43a
arch/arm/src/lpc54xx: Make the SDMCC driver selection EXPERIMENTAL since it has not yet been verified.
2017-12-19 12:23:37 -06:00
Gregory Nutt
5a66684293
Squashed commit of the following:
...
arch/arm/src/lpc54xx: Adds the LPC54-specific clock configuration logic to the leveraged SD/MMC driver.
arch/arm/src/lpc54xx: Leveraged SD/MMC driver builds without error but is still missing clock configuration logic.
arch/arm/src/lpc54xx: Bring in LPC43xx SD/MMC driver from https://github.com/Smoothieware/smoothie-nuttx/tree/master/nuttx/arch/arm/src/lpc43xx
2017-12-19 12:09:22 -06:00
Gregory Nutt
c17651e26e
arch/arm/include/lpc54xx: Add SD/MMC header file.
2017-12-19 09:12:42 -06:00
Gregory Nutt
6f897d32a2
confifgs/lpcxpresso-lpc54628: Calibrate delay loop.
2017-12-19 08:21:41 -06:00
Gregory Nutt
5a0963f0b0
drivers/ft5x06.x and related: Minor cleanup after completing the FT5x06 driver verification.
2017-12-19 07:14:02 -06:00
Gregory Nutt
d29de95996
drivers/input/ft5x06.c: Fix a problem was was causing missing reports when the touch ends.
2017-12-18 20:06:42 -06:00
Gregory Nutt
d9997846b6
Lpcxpresso-Lpc54618 and FT5x06 driver. Some improvements in configuration and the touchscreen driver improves the behavior some. Now I get the calibration screen and detect touches (but no un-touches).
2017-12-18 17:22:35 -06:00
Gregory Nutt
ead23dca30
configs/lpcxpresso-lpc54628: Add an NxWM configuration. Not yet functional.
2017-12-18 13:33:37 -06:00
Gregory Nutt
3edd670c71
configs/stm32ldiscovery: Fix a mimatched #endif introduced in recent commit.
2017-12-18 10:41:47 -06:00
Gregory Nutt
4a5e18a6db
drivers/ft5x06.c: Add additional configuration options: Optimize if multi-touch capability is not used. Add options to swap X/Y and thresholding to reduce the rate of false alarm reports (with no motion).
2017-12-18 10:31:49 -06:00
Gregory Nutt
23dfc0bf06
drivers/ft5x06: Add a polled mode of operation for the FT5x06 in attempt to work around the fact that the LPCXpresso-LPC54628 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still not yet functional.
2017-12-18 08:58:07 -06:00
Gregory Nutt
783d2cabee
configs/indium-f7: None of the configurations would build because the claimed to support buttons, but the button code does not compile. Refreshed all configurations with the configuration tools that have all become corrupted. Somebody has been hand editing config files and fucking things up!
2017-12-18 06:57:38 -06:00
Gregory Nutt
c014400895
drivers/input/ft5x06: Fix a misconception.. WAKE is an output, not an input.
2017-12-18 06:36:44 -06:00
Gregory Nutt
8057af6724
fs/fat: Still trying to eliminate warnings in all configurations.
2017-12-17 17:10:37 -06:00
Gregory Nutt
bd8a07a4b2
configs: Still trying to get consistent name. button driver expects board to define NUM_BUTTONS, not BOARD_NUM_BUTTONS. That was changed in all board.h header files, but there are still references in configs/ C files to BOARD_NUM_BUTTONS
2017-12-17 16:54:53 -06:00
Gregory Nutt
0e6e05bf11
arch/arm/src/kinetis: Fix some compile warnings that I introduced with a possibly overzealous recent change.
2017-12-17 16:26:03 -06:00
Gregory Nutt
ac70f688a3
Update README.txt
2017-12-17 15:32:07 -06:00
Gregory Nutt
c62a9ea727
drivers/input/ft5x06.c: Add a driver for the FT5x06 capacitive, multi-touch, touchscreen controller. configs/lpcxpresso-lpc54628: Add support for the the FT5x06. Enable the driver as well as the apps/examples touchscreen test. Untested on initial commit.
2017-12-17 15:17:06 -06:00
Gregory Nutt
87252297d6
arch/arm/src/: Fix a error in last commit that was cloned in three places.
2017-12-17 14:38:20 -06:00
Gregory Nutt
a1e250697c
configs/*/include; Remove prototype of xyz_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/xyz/xyz_start.h
2017-12-16 20:47:44 -06:00
Gregory Nutt
0f10f6bdec
configs/*/include; Remove prototype of stm32_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/stm32*/stm32*_start.h
2017-12-16 20:02:03 -06:00
Gregory Nutt
664484bf5b
configs/indium/include/board.h: Remove extra endif
2017-12-16 19:29:58 -06:00
Bob Feretich
face14b0db
confgs/indium-f7: Adds support for the RAF Research Indium-F7 board.
2017-12-16 16:04:58 -06:00
Gregory Nutt
de4fc5864f
arch/arm/src/lpc54xx: Fix some GPIO interrupt configuration errors. Add logic to acknowledge rising/falling edge events. config/lpcxpresso-lpc545628: Add an intermediate interrupt handler to support acknowledgement of rising and falling edge interrupts.
2017-12-16 15:34:41 -06:00
Gregory Nutt
5a12079e53
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 13:00:06 -06:00
Gregory Nutt
4c72f57273
arch/arm/src/lpc54xx: I2C now appears to be functional. Needs more testing.
2017-12-15 14:58:37 -06:00
Gregory Nutt
c8a8eb028f
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 11:38:55 -06:00
Gregory Nutt
c53d88c75c
Squashed commit of the following:
...
arch/arm/src/lpc54xx: LCD.. Fix some miconceptions about how the video address lines are used.
arch/arm/src/lpc54xx: Fix some LCD BPP and BRG vs RGB settings.
2017-12-14 10:45:53 -06:00
Gregory Nutt
43a88c1428
arch/arm/src/lpc54xx: Fix some LCD clocking. This eliminates the hang problem. That is now recognizable albeit corrupted data on the display.
2017-12-13 19:07:10 -06:00
Gregory Nutt
d93a2d4f39
arch/arm/src/lpc54xx: Add reset logic. Some changes while debugging LDC. Does not yet work (hangs).
2017-12-13 14:36:58 -06:00
Gregory Nutt
f215660296
configs/lpcxpresso-lpc54628: Add the fb configuration testing the LCD. arch/arm/src/lpc54xx: Various fixes needed to get the fb configuration to build errorfree. The configuration is not functional as of this writing.
2017-12-13 09:18:16 -06:00
Gregory Nutt
b33d7eb59f
arch/arm/src/lpc54xx: Add the ported LPC1788 LCD driver to use the LPC54xx pin definitions and SYSCON.
2017-12-12 12:53:33 -06:00
Gregory Nutt
88834b6e50
arch/arm/src/lpc54xx: Add configuartion support and logic it all none, some, or all of the external RAM to the system heap.
2017-12-12 11:33:18 -06:00
Gregory Nutt
63415f9fb1
arch/arm/src/lpc54xx: Clone the LPC1788 LCD driver. The LPC54628 LCD interface is identical. The initial commit is a brute force clone. It still needs review to make sure the LDC is appropriately enabled in the SYSCON and that clocking is provided. Also, extend the SPI 'skeleton' file so that has a place to support for SPI DMA and the SPI exchange method.
2017-12-12 10:13:21 -06:00
Gregory Nutt
0cd87be495
arch/arm/src/lpc54xx: Correct the EMC divider register definition and one typo in the SDRAM setup. SDRAM is not fully functional on this board!
2017-12-12 08:24:57 -06:00
Gregory Nutt
0508048291
configs/lpcxpresso-lp54629: Add logic to configure EMC pins. arch/arm/src/lpc54xx: Correct GPIO read/write logic. Update pin configuration for EMC pins. All should have the input file offset and fast slew rate.
2017-12-11 09:07:51 -06:00
Gregory Nutt
df3404da09
arch/arm/src/lpc54xx: Various fixes for initial build of SDRAM support. Still unverified (but at least appears to be nonfatal).
2017-12-10 17:20:16 -06:00
Gregory Nutt
1f6dfc6351
arch/arm/src/lpc54xx: Bring in NXP support for external SRAM.
2017-12-10 16:52:15 -06:00
Gregory Nutt
dab97de4ea
arch/arm/src/lpc54xx: Bring in NXP support for external SDRAM.
2017-12-10 16:07:30 -06:00
Gregory Nutt
77728f49f1
arch/arm/src/lpc54xx: Add EMC register definitions. Add basic build support for EMC and SDRAM.
2017-12-10 12:40:01 -06:00
Gregory Nutt
66ee22f363
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 08:54:24 -06:00
Gregory Nutt
52f9128562
arch/arm/src/lpc54xx: Add USART pin configuration. Need enable IOCON and GPIO clocking.
2017-12-09 09:11:17 -06:00
Gregory Nutt
246a97008e
arch/arm/src/lpc54xx: Minor updates from review of recent changes
2017-12-08 17:32:31 -06:00
Gregory Nutt
da6c604ed1
Squashed commit of the following:
...
configs/lpcxpresso-lpc54628: Add support for on-board LEDs.
arch/arm/src/lpc54xx: Add support for GPIO/Peripheral pin configuration.
arch/arm/src/lpc54xx/chip: Add IOCON register definition file.
arch/arm/src/lpc54xx: Add GPIO and (incomplete) PINT register definition header files.
2017-12-08 13:12:07 -06:00
Masayuki Ishikawa
ab96e3fdc7
Merged in masayuki2009/nuttx.nuttx/lc823450_smp_improvement (pull request #554 )
...
lc823450 smp improvement
* arch/arm/src/common: Apply irq_spin APIs to modifyregXX
Replace enter_critical_section with spin_lock_irqsave.
Replace leave_critical_section with spin_unlock_irqrestore.
Please see 6150299f54
2017-12-08 12:31:34 +00:00
Anthony Merlino
87291e0064
Merged in antmerlino/nuttx/photon-timer (pull request #552 )
...
configs/photon: Adds BOARD_TIMn_FREQUENCY macros
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-07 19:43:23 +00:00
Gregory Nutt
8bc90a1899
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available.
...
Squashed commit of the following:
arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support.
arch/arm/src/lpc54xx: Add lpc54_clrpend.c
arch/arm/src/lpc54xx: Serial driver is complete and compiles.
arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic)
arch/arm/src/lpc54xx: Fleshes out low level USART intialization.
arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half.
arch/arm/src/lpc54xx: Beginning of USART console support.
arch/arm/src/lpc54xx: Completes very basic clock configuration.
arch/arm/src/lpc54xx: Add clocking logic (still not complete)
arch/arm/src/lpc54xx: Beginning of PLL configuration logic.
arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic.
arch/arm/src/lpc54xx: Addes some SysTick logic.
arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration.
arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic.
arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file.
arch/arm/src/lpc54xx: Add FLEXCOMM header file.
arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled.
arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished)
LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files.
arch/arm/src/lpc54xx: Add (incomplete) USART header file.
Add another condition to a Kconfig; refresh a defconfig.
arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files.
configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628
arch/: Basic build directory structure for the LPC54628
2017-12-07 13:30:02 -06:00
Gregory Nutt
d540f3fd60
Costmetic update to comments and README.
2017-12-02 11:14:32 -06:00
Alan Carvalho de Assis
505358b08f
configs/stm32f103-minimum: Add Nunchuck board support for stm32f103-minimum board
2017-11-29 07:06:54 -06:00
Gregory Nutt
4d4029afeb
Update README files
2017-11-28 14:43:36 -06:00
Gregory Nutt
472fa0cf20
Add missing file in previous commit
2017-11-28 12:54:03 -06:00
Alan Carvalho de Assis
6e22092c67
configs/stm32f4discovery/src: Add stm32f4discovery board support for Nunchuck joystick
2017-11-28 12:23:02 -06:00
Alan Carvalho de Assis
a3e6d02d8b
configs/stm32f4discovery/include/board.h: Remove only I2C pin config, we can use PB6 and PB9
2017-11-28 12:20:45 -06:00
Masayuki Ishikawa
da7f0542f0
Merged in masayuki2009/nuttx.nuttx/lc823450_rndis (pull request #549 )
...
configs/lc823450-xgevk: Add rndis configuration
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-28 04:31:16 +00:00
Masayuki Ishikawa
fb49472ec8
Merged in masayuki2009/nuttx.nuttx/lc823450_smp_audio (pull request #547 )
...
lc823450 smp audio
* arch/arm/src/lc823450: Remove a workaround in up_cpu_paused()
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Introduce g_gpio_lock to improve write performance in SMP mode.
NOTE: This is a tentative solution and should be replaced with more generic one.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Add a workaround in up_txready() to avoid data corruption.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Enable CONFIG_SMP for audio
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Update README.txt regarding SMP audio
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-27 07:20:54 +00:00
Gregory Nutt
43a221f308
configs: Remove some old, redundant, obsolete boilerplate regarding toolchains that has been cloned into most of the board README files.
2017-11-26 11:36:03 -06:00
Gregory Nutt
b7eaec3de3
configs/stm3240g-eval: Add support for pdcurses and the pdcurses demo programs in the 'fb' configuration.
2017-11-26 06:32:43 -06:00
Gregory Nutt
5328e3bafb
configs/: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: update occurrences in several Kconfig files
2017-11-25 18:46:43 -06:00
Alan Carvalho de Assis
674b331f03
arm/src/xmc4: Include Alt. Interrupt Enable to RX_EVENTS and rename serial GPIO configurations.
2017-11-25 18:13:23 -06:00
Gregory Nutt
38dc3fe442
STM3240G-EVAL: Mount procfs if enabled.
2017-11-25 18:03:01 -06:00
Gregory Nutt
c2c2c4f111
drivers/lcd: Make LCD driver configuration indepently selected from NX graphics configuration. This makes things awkward and loses some error checking but is a necessary step in order to make LCD drivers usable when the NX graphics system is disabled.
2017-11-25 13:13:30 -06:00
Gregory Nutt
5c27c0dad4
STM32F4 Discovery: Fix some errors do missing inclusion of stm32_gpio.h
2017-11-25 12:06:22 -06:00
Gregory Nutt
3657723208
drivers/lcd: Add support for external LCD initialization required by some board logic. configs/zpa214xpa: Tried to get the LCD working again unsuccessfully. Too much bit rot I suppose.
2017-11-25 11:41:21 -06:00
Gregory Nutt
776b65bc90
Revert "arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC."
...
This reverts commit 88982df09c
2017-11-25 09:45:12 -06:00
Gregory Nutt
88982df09c
arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC.
2017-11-25 08:19:43 -06:00
Gregory Nutt
b2764a9e4b
graphicx/nxmu: nx_server() should be static.
2017-11-25 06:54:13 -06:00
Alan Carvalho de Assis
639f77341a
arch/arm/src/xmc4: Remove hard-coded values in clock configuration. USB will be fixed later.
2017-11-25 06:39:44 -06:00
Gregory Nutt
288db5c7b5
configs/xtrs: Removed the XTRS configuration This was an unverified port of NuttX to a TRS-80 simulator. It was removed because (1) it is, as I said, unverified as well as unsupported, and (2) the TRS-80 simulation is a sub-optimal platform. That platform includes a 16-bit ROM image and only a 48Kb RAM space.
2017-11-24 15:21:34 -06:00
Alan Carvalho de Assis
0ac8ac240a
arch/arm/src/xmc4: Do not run at 144MHz unless BOARD_FCPU_144MHZ is selected in the board.h header file.
2017-11-24 12:47:47 -06:00
Alan Carvalho de Assis
3931621bde
configs/xmc4500-relax: Setup max. freq. 120MHz and setup pull-up to UART RXD pin
2017-11-24 12:31:02 -06:00
Gregory Nutt
168809764f
configs: All NX configuration... Because of recent changes to libnx/nxfonts, Supported bit per pixel must be separated specified for NXFONTs too and need to match the select BPP for NX.
2017-11-24 06:33:54 -06:00
Alan Carvalho de Assis
e4fcf00fc5
configs/stm32f4disovery: Add support for JLX12864G display on STM32F4 Discovery board
2017-11-23 08:41:16 -06:00
Anthony Merlino
3be15c0f8f
clicker2-stm32: Adds support for USB RNDIS device
2017-11-22 14:03:58 -05:00
Gregory Nutt
af65eac4f2
net/icmp and icmpv6: Fix some errors in debug assertions introduced with last changes in this area. Also updates a REAME.txt file
2017-11-22 11:38:17 -06:00
Gregory Nutt
d1aead1d8c
configs/lm3x*/README.txt: Remove some old, redundant, obsolete stuff from some README.txt files.
2017-11-22 06:54:47 -06:00
Alan Carvalho de Assis
389cc49447
configs/stm32f103-minimum: Add framebuffer driver initialization for stm32f103-minimum board
2017-11-22 06:32:36 -06:00
Gregory Nutt
bcc61fed26
Update a README and a misnamed formal parameter.
2017-11-21 09:24:25 -06:00
Miha Vrhovnik
8bb54368c8
Various fixes for errors ound while debugging OTG on L496
...
STM32, STM32 L4, and STM32 M4: USB OTGFS DMA trace output fix
STM32: Add dump buffer feature to stm32 F4 series
STM32 and STM32 L4: Fix bad USB OTGFS register address
STM32 L4: Fix typo in USB OTGFS register usage
STM32 L4: Add check in USB OTGFS driver to assure that SYSCFG is enabled
Nucleo-L496ZG: Make HSE on Nucleo-L496ZG default to enable USB
2017-11-21 06:32:53 -06:00
Gregory Nutt
b9bb2253b6
Update a README.
2017-11-21 06:12:13 -06:00
Gregory Nutt
1fba8ba145
configs/open1788: Enable discrete joystick input. This is sufficient to get through all menuing that does not require text input.
2017-11-20 14:16:01 -06:00
Gregory Nutt
92a9a9b678
configs/open1788: Add support for the discrete joystick driver. Update the pdcurses configuration to use apps/examples/djoystick.
2017-11-20 10:00:52 -06:00
Gregory Nutt
34bae015df
Squashed commit of the following:
...
libnx/nxfonts: Cosmetic; reduce amount of debug output.
configs/open1788/pdcurses: Add a configuration for testing pdcurses.
2017-11-19 13:31:04 -06:00
Alan Carvalho de Assis
494d2a486c
configs/mcb1700: Add support for Keil MCB1700 board
2017-11-18 10:57:25 -06:00
Gregory Nutt
28de00a90a
Changes to allow the font subsystem to be built without enabling the entire graphics system (CONFIG_NX). Adds CONFIG_NXFONTS and CONFIG_NXGLIB. NX and NXFONTS are still pretty heavily entangled
...
Squashed commit of the following:
libnx: Need to duplicate some Kconfig setting for NXFONTs if it can be configured and built independently of NX. Also includes some build-related fixes.
configs/sim: Disable NX graphics support in the fb configuration.
libnx: Basic configuration and build changes to support building font support independend of the NX server.
2017-11-18 10:19:34 -06:00
Bob Feretich
fab5faf097
STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722.
2017-11-18 07:55:50 -06:00
Bob Feretich
13b52da3fa
stm32 f72xx and f73xx: Add register definition header files and clocking logic
2017-11-17 07:18:02 -06:00
Alan Carvalho de Assis
4f0c4b798f
configs/xmc4500-relax: Add config for UART3 on RXD P0.0 and TXD P0.1 pins.
2017-11-16 13:53:01 -06:00
Alan Carvalho de Assis
fcb5129567
arch/arm/src/xmc4: Kconfig was not selecting XMC4_USIC for USIC1.
2017-11-16 13:51:17 -06:00
Gregory Nutt
0649209725
configs/stm3220g-eval/ide: Remove the uVision IDE setup. This has not been used for years and it a maintenance problem for me.
2017-11-16 08:51:49 -06:00
Gregory Nutt
aeab28ef5c
configs/stm32f429i-disco/ide: Remove the uVision IDE setup that goes along with the ltdc configuration that was removed on 2017-10-28.
2017-11-16 07:56:30 -06:00
Gregory Nutt
a958349353
STM32F429i-Disco: Convert NxWM configuration to use LTDC framebuffer driver instead of SPI serial. Also reduce number of layers from 4 to 1 in fb configuration. Only one layer is used.
2017-11-15 11:47:14 -06:00
Gregory Nutt
37ca491be6
Build system: Fix CONFIG_BUILD_KERNEL logic directories that have ubin and kbin subdirectories. Conditional logic was fine for CONFIG_BUILD_FLAT and CONFIG_BUILD_PROTECTED but generated useless dependencies if CONFIG_BUILD_KERNEL.
2017-11-15 11:39:30 -06:00
Masayuki Ishikawa
ccc52e70d5
Merged in masayuki2009/nuttx.nuttx/lc823450_built_on_cygwin (pull request #535 )
...
configs/lc823450-xgevk: Fix compilation errors on Cygwin
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-15 11:27:21 +00:00
Gregory Nutt
64bcf3ec94
configs/stm32429i-disco/src: Fix a compile error when CONFIG_BOARD_INITIALIZE is defined.
2017-11-14 16:52:22 -06:00
Gregory Nutt
62b8026976
Remove CONFIG_GRAN_SINGLE. It adds no technical benefit (other than some minor reduction in the number of interface arguments) but adds a lot of code complexity. Better without it.
2017-11-14 11:47:12 -06:00
Gregory Nutt
d99f1ca574
configs/stm32f429-disco/fb: Enable support for the STMPE811 touchscreen controller and also for the apps/exmaples/touchscreen test.
2017-11-14 10:18:03 -06:00
Gregory Nutt
d427872bd6
configs/stm32f429i-disco: Add logic to auto-mount procfs. Enable procfs in all configurations that use NSH.
2017-11-13 16:46:45 -06:00
Gregory Nutt
cd498778bd
configs/stm32f429i-disco/: Fix a warning and some C comments.
2017-11-13 16:23:14 -06:00
Gregory Nutt
13b742236d
Update some README files.
2017-11-13 15:49:38 -06:00
Gregory Nutt
f3cac38ed6
configs/stm32f429i-disco/fb: Refactor initialization logic so that it is a little more like other boards. Remove double initialization of framebuffer or LCD drivers (whichever is enabled).
2017-11-13 15:10:00 -06:00
Gregory Nutt
2ff9f0e5b1
configs/stm32f429i-disco/fb: Fix a compile issue. Disable all NX features in the fb configuration. NX is not needed.
2017-11-13 14:52:10 -06:00
Gregory Nutt
bf724ddf61
configs/stm32f439i-disco: Add an fb configuration
2017-11-13 14:33:47 -06:00
Gregory Nutt
7b676c8a02
Update README.txt
2017-11-13 09:26:39 -06:00
Alan Carvalho de Assis
7d407fcbd6
Nucleo-F746ZG: Use the serial console over /dev/ttyACM0 by default. The Nucleo-F746ZG doesn't come with Arduio RS-232 shield, then it is better to use the serial over the /dev/ttyACM0 that is created automatically when the board is plugged in the computer.
2017-11-13 09:14:37 -06:00
Gregory Nutt
bfcc8fcbb6
configs/: apps/system/free has been deleted because it violates the portable POSIX OS interface. Remove CONFIG_SYSTEM_FREE=y from all defconfig files.
2017-11-13 08:03:45 -06:00
Masayuki Ishikawa
14e2b6dc5b
Merged in masayuki2009/nuttx.nuttx/stm32f4discovery_rndis (pull request #533 )
...
RNDIS support on STM32F4Discovery
* stm32f4discovery: Add stm32_netinit.c to avoid a compilation error
* stm32f4discovery: Add rndis initialization in stm32_bringup.c
NOTE: MAC address for the host side starts 0xaa. This assignment
scheme should be fixed later.
* stm32f4discovery: Add rndis configuration
NOTE: STM32F4Discovery + DM-STF4BB
* drivers/usbdev/rndis.c: Fix some issues in rndis.c
Introduce rndis_transmit() and change rndis_rxdispatch() to avoid
packet corruption. Introduce max packet size for dual speed which
is mainly used for high speed mode. Fix adjusting MTU warning
on Linux host. Fix data corruption if a packet size excceds MTU.
NOTE: Max packet size is not configured dynamically. This should
be fixed in the future version.
* stm32f4discovery: Modify #ifdef condition for rndis in stm32_bringup()
* drivers/usbdev/rndis.c: Change HPWORK to ETHWORK
* drivers/usbdev/rndis.c: Merge the commit 07b98ccbb507b98ccbb507b98ccbb5
2017-11-13 08:55:41 +00:00
Gregory Nutt
b238ede68f
configs/stm32l476-mdk: Repartition bring-up logic so that it is more like other board directories. Add support for USERLED driver. Add bring-up initialization logic for the USERLED driver.
2017-11-12 13:24:13 -06:00
Gregory Nutt
d594d1f56e
configs/stm32l476-mdk: Add support for the on-board LEDs.
2017-11-12 12:56:38 -06:00
Gregory Nutt
8b64f8ae49
Update README.txt
2017-11-12 11:41:20 -06:00
Gregory Nutt
5004e8b3ea
libc: Add support for readv() and write(). Also includes some cosmetic changes to some unrelated files.
2017-11-11 11:44:14 -06:00
Gregory Nutt
f41d968455
tools/configure.c: Trivial design improvement to last commit.
2017-11-10 09:39:06 -06:00
Gregory Nutt
f748d01a53
Update README
2017-11-10 09:01:39 -06:00
Gregory Nutt
efd798661a
Update README again
2017-11-09 16:42:42 -06:00
Gregory Nutt
baf120043e
Update README
2017-11-09 16:32:20 -06:00
Masayuki Ishikawa
da78c18397
Merged in masayuki2009/nuttx.nuttx/lc823450_autoled (pull request #532 )
...
lc823450 auto LED support
* arch/arm/src/lc823450: Add auto LED for CPU activity
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Add auto LED support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-09 11:36:33 +00:00
Masayuki Ishikawa
51b19d5f38
Merged in masayuki2009/nuttx.nuttx/lc823450 (pull request #531 )
...
lc823450-xgevk audio support
* arch/arm/src/lc823450: Add IPL2 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Add IPL2 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* libc/audio: Fix compilation error in lib_buffer.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* drivers/audio: Add WM8774 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* arch/arm/src/lc823450: Add I2S support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Add WM8774 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-08 12:25:13 +00:00
Masayuki Ishikawa
56eac96d2f
Merged in masayuki2009/nuttx.nuttx/lc823450 (pull request #530 )
...
Add IPL2 support for LC823450
* arch/arm/src/lc823450: Add IPL2 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/lc823450-xgevk: Add IPL2 support
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-07 12:34:23 +00:00
Gregory Nutt
08fa834a6a
arch/arm/include/stm32 and stm32f7: Remove ltdc.h and dma2d.h. Those header files in that location permitted inclusion into application space logic and, hence, facilitated and encouraged calling into the OS and violating the portable POSIX OS interface. The definitions in those header files were move the appropriate location in the counterpart, architecture specific files at arch/arm/src/stm32 and stm32f7 dma2d.h and ltdc.h.
...
configs/stm32f429i-disco/ltdc: This configuration has been deleted because it violated the portable POSIX OS interface. It used apps/examples/ltdc and include ltdc.h and dma2d.h which were also removed for the same reason.
2017-11-06 12:22:48 -06:00
Gregory Nutt
7deb24484c
This comment converts the underlying IPC used by the UserFS from Unix domain local sockets to UDP LocalHost loopback sockets. The problem with the local sockets is that they do require operations on the top level psuedo-file system inode tree. That tree must be locked during certain traversals such as enumerate mountpoints or enumerating directory entries.
...
This conversion is unfortunate in the sense that Unix local domain sockets are relatively lightweight. LocalHost UDP sockets are much heavier weight since they rely on the full UDP stack. If anyone is up for a complete redesign, then using some shared memory and a POSIX message queue would be lightweight again.
This commit also fixes several bugs that were not testable before the inode tree deadlock. I cannot say that the logic is 100% stable but it does not have basic functionality.
Squashed commit of the following:
fs/userfs: Order locking so that access to the shared I/O buffer is also locked.
fs/userfs: Converts to use LocalHost UDP loopback for IPC.
2017-11-05 12:25:58 -06:00
Mateusz Szafoni
2fc5237854
Merged in raiden00/nuttx (pull request #529 )
...
Master
* cosmetics
* stm32_hrtim: add helper macros
* smps: cosmetics
* stm32f33xxx_adc: injected channels support, fix some definitions, add interface to disable interrupts
* stm32f334-dsico: beginning of lower-half driver for SMPS (buck-boost onboard converter)
* nucleo-f334r8/highpri: missing ADC trigger configuration
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-05 14:15:04 +00:00
Alan Carvalho de Assis
4d6c17246f
stm32f103-minimum: Remove warning when selecting MMCSD support
...
stm32f103-minimum: Add board_usbmsc_initialize to stm32f103-minimum
2017-11-05 06:39:28 -06:00
