Sumary
add hostfs support for arm64, it's a copy
from arm32.
Note:
it's not support for opendir and readdir, command
like ls will not work.
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
(IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
support mmio transport layer, and the new framwork support
more transport layer and this commit has implemented all the
old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
configs, and update its README.txt;
New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
| | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh | 539Mbps | 524Mbps | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp | 401Mbps | 437Mbps | 583Mbps | 505Mbps |
| rv-virt:netnsh | 487Mbps | 512Mbps | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp | 387Mbps | 455Mbps | 447Mbps | 502Mbps |
| rv-virt:netnsh64 | 602Mbps | 595Mbps | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp | 414Mbps | 515Mbps | 491Mbps | 525Mbps |
| rv-virt:knetnsh64 | 515Mbps | 457Mbps | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp | 308Mbps | 389Mbps | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
Tested in QEMU 7.2.2
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
NETUTILS_IPERF and CONFIG_DEFAULT_SMALL conflict
Loaded configuration '.config'
Configuration saved to '.config'
warning: LIBC_FLOATINGPOINT (defined at libs/libc/stdio/Kconfig:55) has direct dependencies !LIBM_NONE with value n, but is currently being y-selected by the following symbols:
- NETUTILS_IPERF (defined at /home/baerg/code/NXOS/apps/netutils/iperf/Kconfig:6), with value y, direct dependencies NET (value: y), and select condition NET (value: y)
make: *** [tools/Unix.mk:680: olddefconfig] Error 1
ERROR: failed to refresh
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This PR adds support for PINE64 Star64 64-bit RISC-V SBC, based on StarFive JH7110 SoC. Most of the code is derived from NuttX for QEMU RISC-V (Kernel Mode). [The source files are explained in the articles here](https://github.com/lupyuen/nuttx-star64)
Modified Files:
boards/Kconfig: Added Star64 board
New Files in boards/risc-v/jh7110/star64:
src/jh7110_appinit.c: Startup Code
include/board.h: Star64 Definitions
include/board_memorymap.h: Memory Map
src/etc/init.d/rc.sysinit, rcS: Startup Script
src/.gitignore: Ignore the tmp filesystem
scripts/ld.script: Linker Script
scripts/Make.defs: Star64 Makefile
src/Makefile: Star64 Makefile
Kconfig: Star64 Config
configs/nsh/defconfig: NSH Build Config
Updated Documentation:
introduction/detailed_support.rst: Added StarFive JH7110 SoC and Star64 SBC
platforms/risc-v/jh7110/index.rst: New page for StarFive JH7110 SoC
platforms/risc-v/jh7110/boards/star64/index.rst: Building and booting NuttX for Star64
VELAPLATFO-12536
This provides the initial hooks for Flattened Device Tree support
with QEMU RV. It also provides a new procfs file that exposes the
fdt to userspace much like the /sys/firmware/fdt endpoint in Linux.
See https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-firmware-ofw
Nodes in the fdt are not yet usable by the OS.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: liaoao <liaoao@xiaomi.com>
We can use the driver in nuttx to download
files with debugger
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
replace *(.init_array .init_array.*) with KEEP(*(.init_array .init_array.*)).
The KEEP statement within a linker script will instruct the linker to keep the specified section, even if no symbols inside it are referenced. This statement is used within the SECTIONS section of the linker script. This becomes relevant when garbage collection is performed at link time, enabled by passing the --gc-sections switch to the linker. The KEEP statement instructs the linker to use the specified section as a root node when creating a dependency graph, looking for unused sections. Essentially forcing the section to be marked as used.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
- Added Wi-Fi related symbols to the kernel-space linker;
- Allocate more RAM to the kernel (to be useb by the Wi-Fi driver).
- Create a specific defconfig.
Instead of setting kernel/user space instruction and data ROM as
hard-coded values on linker, set them according to the max size
of the kernel image set by CONFIG_ESP32S3_KERNEL_IMAGE_SIZE. This
is done by making KIROM, UIROM, KDROM and UDROM dependent on the
kernel size value. Also, override CONFIG_NUTTX_USERSPACE config
according to CONFIG_ESP32S3_KERNEL_IMAGE_SIZE by using a custom
PREBUILD definition.
boards/arm/cxd56xx/drivers/sensors/bmi160_scu.c: fix incorrect comments to the Right of Statements.
drivers/sensors/ak09912.c: fix incorrect function description ak09912_putreg8 and ak09912_getreg8
Fix an issue that GPO pins is not iniitalized by watchdog reboot.
If the watchdog expires during LTE is in use, it causes the LTE
to remain powered on and fails to launch after reboot.
drivers/sensors/bme680.c: The bme680 driver
sensor.h: Added new type of sensor (Gas) to be used for retrieving the bme680 data
esp32/common/src/esp32_bme680.c: bme680 support on esp32
esp32/esp32-sparrow_kit/esp32_bringup.c: added support for the bme680
esp32/esp32-sparrow-kit/configs/nsh/defconfig: fixed defconfig ci problem
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
esp32-sparrow-kit: Fixed defconfig
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Code is now C89 compatible
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Reused already defined sensor data structs by registering every sub-sensor separately
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Implemented suggestions
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Basically, it reserves an area of the RTC memory to preserve the
RTC timer.
Please refer to:
fa76c82a5b
This commit also removes the rtc.dummy section because C3, C6 and
H2 don't need to skip it once the region is accessed by the same
address space using the instruction and data bus.
board/esp32s3/common is for common board driver. It should not
include a header file from specific board. so remove include
of esp32s3-devkit.h from some of the common driver source
Remove TABs
Fix indentation
Fix Multi-line comments
Fix Comments to the Right of Statements.
Fix nuttx coding style
Fix Comments to the Right of Statements.
When reading https://github.com/apache/nuttx-apps/pull/1793, I found a previous problem https://github.com/apache/nuttx-apps/pull/1454#discussion_r1045718067 now still exists on current master (inf in iperf bandwidth).
By step-by-step debugging, I found a value of 1000000.0 stored in register d8 is overwritten as 0 after context switch, then fdiv results in inf because of divided by 0. Finally I found that ARCH_FPU is not enabled while compiler is using FPU, and may lose values in floating-point registers.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
esp32-sparrow-kit: Added rgb led driver to bringup and to defconfig
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Fixed checkstyle
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Update esp32_rgbled.h
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Update boards/xtensa/esp32/common/src/esp32_rgbled.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Removed ret 0 as an error in the case of nx_write()
The framebuffer itself already initializes the display so there is no need to
do the reverse operation. Otherwise the code gets stuck in an infinite loop.
Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
Summary:
- This commit adds netnsh_hv and netnsh_smp_hv to run the NuttX
with hypervisor environments
- Also updates README.txt
Impact:
- None
Testing:
- Tested with qemu=7.1 + kvm on raspi3b+ (ubuntu server 20.04)
- Tested with qemu-7.1 + hvf on M1/MBP (macOS 12.6.1)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that virtio-blk and FAT are not enabled for some
virt configurations.
- This commit enables them for testing.
Impact:
- None
Testing:
- Tested with qemu-7.1
- NOTE: file copy with rv-virt:knetnsh64 is sometimes unstable.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Changes the executable type built against the `make export` target fully linked by default. This greatly improves performance when loading applications, as relocations no longer need to be processed.
SAMv7 encoder driver with GPIO pins was written without IOCTL support.
While this driver does not require any lower level IOCTLs for its
functionality the upper layer fails on assertion when unknown command
can not be send to lower layer. This commit adds IOCTL handler that
always returns -ENOTTY as no commands are supported.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This PR is a modification that optimizes priority inheritance
for only one holder. After the above modifications are completed,
the mutex lock->unlock process that supports priority inheritance
can be optimized by 200 cycles.
Before modify: 2000 cycle
After modify: 1742 cycle
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
use PTHREAD_CLEANUP_STACKSIZE to enable or disable interfaces pthread_cleanup_push() and pthread_cleanup_pop().
reasons:(1)same as TLS_TASK_NELEM (2)it is no need to use two variables
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
Updated alt1250 driver with regarding to the following changes.
- Add LTE hibernation feature
- Split source code per module
- Some refactoring
- Some bug fixes
This also removes kconfig warning:
Normalize icicle/knsh
.config:248:warning: symbol value '' invalid for ARCH_KMAP_VBASE
.config:248:warning: symbol value '' invalid for ARCH_KMAP_VBASE
Adds a driver for an FPGA fabric / CoreSPI implementation.
Supports multiple instances, assuming they reside in some base address,
offsettable by a constant value.
This incorporates an fpga i2c driver into the existing i2c driver.
This fpga i2c works almost 100% as the MSS i2c, but the difference
is that the fpga driver terminates all transactions with a stop
sent -interrupt. That needs to be handled.
Fpga clock source is also different, act accordingly.
SEC2TICK(10) is an overkill to any app, use just one second instead.
modifyreg32s are simplified as well, no need to clear and set
as set is enough.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Board related code may use different mounts for MTD device (block
character for one, SmartFS for another) if required by the board.
Additional type member was therefore added to mtd_partition_s structure
in order to support this.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
- Update TrustedFirmare-M instructions to latest version of STM32CubeL5
- Increase idle thread stack size to not overflow during system init
- Select ARCH_HAVE_TRUSTZONE for STM32L5
- Set CONFIG_ARCH_TRUSTZONE_NONSECURE for stm32l562e-dk:nsh, since NuttX
is running in the Non-secure world.
See https://github.com/apache/nuttx/issues/9316
Signed-off-by: Michael Jung <michael.jung@secore.ly>
Whenever a SPI flash operation is going to take place, it's
necessary to disable both the instruction and data cache. In order
to avoid the other CPU (if SMP is enabled) to retrieve data from
the SPI flash, it needs to be paused until the current SPI flash
operation finishes. All the code that "pauses" the other CPU (in
fact, the CPU spins until `up_cpu_resume` is called) needs to run
from the instruction RAM.
This config also prevents crashes due to the commit 6be363f, which
fix a race condition in multi-threaded write/read of the serial
driver, but increases stack size.
if multiple threads are doing serial read/write at the same time,
the driver will only wake up one of the thread, which will cause
other threads fail to be woken up in time and cause blocking
Signed-off-by: chao an <anchao@xiaomi.com>
Instead of using Espressif's emulated NVS to save Wi-Fi data, use
`wapi`s wireless configure initialization mechanism for saving
Wi-Fi data. It 1) avoids creating a specific storage partition
just to save Wi-Fi data (ESP32-C3's storage partition is used
instead); 2) avoids initialization problems of the emulated NVS
when SMP is enabled (the Wi-Fi driver tries to initialize it before
the actual partition is initialized); and 3) enables reconnecting
using `wapi reconnect` command and connect the device automatically
on bringup if `CONFIG_NETUTILS_NETINIT` is selected.
Instead of using Espressif's emulated NVS to save Wi-Fi data, use
`wapi`s wireless configure initialization mechanism for saving
Wi-Fi data. It 1) avoids creating a specific storage partition
just to save Wi-Fi data (ESP32's storage partition is used
instead); 2) avoids initialization problems of the emulated NVS
when SMP is enabled (the Wi-Fi driver tries to initialize it before
the actual partition is initialized); and 3) enables reconnecting
using `wapi reconnect` command and connect the device automatically
on bringup if `CONFIG_NETUTILS_NETINIT` is selected.
Instead of using Espressif's emulated NVS to save Wi-Fi data, use
`wapi`s wireless configure initialization mechanism for saving
Wi-Fi data. It 1) avoids creating a specific storage partition
just to save Wi-Fi data (ESP32-S3's storage partition is used
instead); 2) avoids initialization problems of the emulated NVS
when SMP is enabled (the Wi-Fi driver tries to initialize it before
the actual partition is initialized); and 3) enables reconnecting
using `wapi reconnect` command and connect the device automatically
on bringup if `CONFIG_NETUTILS_NETINIT` is selected.
ld: warning: arch_setjmp_x86_64.o: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: nuttx.rel: requires executable stack (because the .note.GNU-stack section is executable)
The linker is instructed to make the stack non-executable with the
switch: `-z noexecstack`.
More information can be found here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ffcf9c5700e49c0aee42dcba9a12ba21338e8136
Currently only Port UART0 is supported for Allwinner A64. This PR adds support for all UART Ports: UART1 to UART4. (Except R-UART, which is a special low-power UART)
This is required for the upcoming LTE Modem Driver (Quectel EG25-G) for PINE64 PinePhone, which uses UART3. [(Details here)](https://lupyuen.github.io/articles/lte2)
The code was adapted from the NuttX UART Driver for Allwinner A1X: [`a1x_serial.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_serial.c)
`arch/arm64/src/a64/a64_serial.c`: Added ports UART1 to UART4, based on [`a1x_serial.c`](https://github.com/apache/nuttx/blob/master/arch/arm/src/a1x/a1x_serial.c)
`arch/arm64/src/a64/a64_serial.h`: Added IRQs for UART1 to UART4. Moved UART Base Addresses to `a64_memorymap.h`
`arch/arm64/src/a64/hardware/a64_memorymap.h`: Added UART Base Addresses for UART0 to UART4
`arch/arm64/src/a64/Kconfig`: Added UART1 to UART4 to Allwinner A64 Peripheral Selection menu
`boards/arm64/a64/pinephone/configs/lcd/defconfig`, `lvgl/defconfig`, `nsh/defconfig`, `sensor/defconfig`: Fixed `UART1_SERIAL_CONSOLE` to `UART0_SERIAL_CONSOLE`
This commit aims to enable the use of ROM functions on ESP32-S2.
This is done by creating the required syscall stubs table and adding the missing symbols to the linker script.
This commit aims to enable the use of ROM functions on ESP32.
This is done by creating the required syscall stubs table and adding the missing symbols to the linker script.
At present, the serial drivers qemu_serial.c and serial_pl011.c on the fvp-v8r and qemu platforms in arm64 are duplicated
and need to be merged. The plan is to place them under the drivers\serial directory to create a common code module,
so that both fvp-v8r and qemu can use the same code.
In the future, if new platforms use pl011 serial ports, they can also be directly reused
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Summary:
Keeping this option out of depend on any common serial.
Using the option, need to implement xxx_lowputc.S/c.
You can also logging the booting message through rewriting
fake arm64_lowputc with other debug method (eg semihosting,
ARM debug channel etc).
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Adds support for the ES8311 codec on the ESP32-S2-Kaluga-1 board. This commit also adds basic configurations for testing and updates the board documentation.
Run:
$ ./tools/refresh.sh --silent --defaults all
It will report that CONFIG_START_DATE and/or CONFIG_START_MONTH
are using invalid value starting with 0, so 03 should be 3, and so
on.
While using NVS-like storage of the Wi-Fi driver, an error was
thrown while trying to access a file whose name was longer than
the mounted SPIFFS `CONFIG_SPIFFS_NAME_MAX`.
RTP Tools is a set of small applications that can be used for
processing RTP data. This application is able to receive RTP
packets and write the content to a FIFO. `nxplayer` then reads
from the FIFO, enabling using NuttX as a RTP receiver for audio
applications.
This is particularly useful to stream uncompressed audio through
Wi-Fi to remote speakers.
RTP Tools is a set of small applications that can be used for
processing RTP data. This `defconfig` builds the `rtpdump` and
is able to receive RTP packets and print the contents.
The defconfigs that test PSRAM on ESP32 contain the `ramtest` app,
but it doesn't test the memory correctly as it try to access the
memory directly. The memory, however, is being used by the system's
heap and `ramtest` can mess with it. Therefore, it makes sense to
test using `mm` testing app.
I noticed sometimes once config changed, it will not launch to shell,
maybe due to
K210 is a 64-bit platform and without misaligned memory access support.
This patch may fix this problem, it will not introduce new issues at least.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Add private data for spi_bitbang low-level driver to add an instance
specific private data.
And add spi_destroy_bitbang() to clean up a driver instance.
- Fix DMA addressing issues within litex_sendsetup/litex_recvsetup
- Extend with handling specific to eMMC commands during init & use.
- Cleanup of 4-bit BUS handling for SD and eMMC
- For eMMC, Send CMD0 during init as per JEDEC v4.41 for pre-idle
Summary:
- This commit adds sabre-6quad:netnsh_ar8031 configuration
Impact:
- None
Testing:
- Tested with ping, telnet, iperf
- Note that iperf in TCP mode still has a performance issue.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* Bind smartfs0 to LUN 0 instead of mmcsd0
* Use USB composite code from similar boards
* Pull in CDC/ACM code as well
boards/stm32f411-minimum: composite: style refactor
* Unalign `int strbase = ` text, use single spaces
* Rename `int n` to `int dev_idx` like in newer `_composite.c` board code
* Add composite defconfig with CDC/ACM and MSC for build-testing
* OTG_FS_VBUS, OTG_FS_ID conflict with USART1. These are not
connected to USB-C in any WeAct Studio MiniF4 board revisions.
* PC9 PWRON & PD5 OVER do not exist on UFQFPN48.
