The LSE crystal oscillator driving strength can only be decreased to the
lower drive capability (LSEDRV = 00b) once the LSE is running, but not
to any other drive capability. Instead of letting the user select a
value between 0 and 3 and then failing the build if the selected value
was not 0, make it a boolean option.
Signed-off-by: Michael Jung <mijung@gmx.net>
Ported from stm32f7/h7: If configured this way, ramp-up the LSE crystal
oscillator driving strength until the LSE starts up.
Signed-off-by: Michael Jung <mijung@gmx.net>
Because a thread of gnss receiver is created by pthread in the
AppBringUp task, the thread would be killed when AppBringUp
task exits.
Change to use kthread_create instead of pthread_create to prevent
this issue.
cxd56_gnss.c uses file descriptor operation from next change.
0536953 Kernel module should prefer functions with nx/kmm prefix
But this change need to add fcntl.h in include header.
So, add missing header.
As proposed by David Sidrane. Required drive strength is board specific
and should be defined in the respective board.h file.
Signed-off-by: Michael Jung <mijung@gmx.net>
Architecture support for STMicroelectronics STM32L552xx and STM32L562xx
MCUs. This is based on corresponding code for STM32L4, but has been
considerably adjusted. Tested with Nucleo-L552ZE-Q and STM32L562E-DK
boards with simple NSH configurations.
Signed-off-by: Michael Jung <mijung@gmx.net>
Alan Carvalho de Assis has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
mmcsd:Remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32h7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc WRITE COMPLETE prevent false triggers
stm32h7:sdmmc WRITE COMPLETE prevent false triggers
While testing PR #2989 on the H7 I noticed that the cards
were staying in 1-bit mode. The root cause was that the
scr read path was using DMA without an invlidate.
This was caused by CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT,
but the sdmmc driver, did not use the delayed invalidate
nor would it work on 8 bytes.
The driver fully supported dcache mgt on runt buffers, but
the #ifdef CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT blocked it.
Reviewing the PR that added CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
it may have been valid at the time. But after the dcache operations
we fixed. It is not necessary and offers no benefit.
Summary:
- This commit fixes an error message in imx_enet.c
Impact:
- None
Testing:
- Build only
Suggested-by: David Sidrane <David.Sidrane@NscDg.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds CPU activity LED feature to cxd56_idle.c and cx56_irq.c
- An LED for the current CPU will turn off before calling WFI
- An LED for the current CPU will turn on when an interrupt happens
Impact:
- CONFIG_ARCH_LEDS_CPU_ACTIVITY=y only
Testing:
- defconfigs will be commited later.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- The original commit was added to avoid hardfault but the
root cause was the stack corruption which has been fixed by
the previous commit. So let me revert the original commit.
Impact:
- SMP only
Testing:
- spresense:rndis_smp with nxplayer + telnet
This reverts commit 197187d826.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes hardfault when running nxplayer with rndis_smp
Impact:
- SMP only
Testing:
- Tested with rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
In scenarios where there is suspicion that someone might be touching your data when you don't expect, you can setup a watchpoint, and then guard accesses that you know are valid. If the debugger halts due to the watchpoint, you'll see where the unexpected access is coming from.
Implement si_send/sendto/recvfrom with si_sendmsg/recvmsg, instead of
the other way round.
Change-Id: I7b858556996e0862df22807a6edf6d7cfe6518fc
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
Bug description:
CONFIG_SMP=y
Suppose we have 2 cores in SMP, here is the ps return:
PID GROUP CPU PRI POLICY TYPE NPX STATE STACK USED FILLED COMMAND
0 0 0 0 FIFO Kthread N-- Assigned 004076 000748 18.3% CPU0 IDLE
1 0 1 0 FIFO Kthread N-- Running 004096 000540 13.1% CPU1 IDLE
nsh> kill -4 0
or:
nsh> kill -4 1
system blocked.
Reason:
In func xx_sigdeliver() restore stage, when saved_irqcount == 0, that means
rtcb NOT in critical_section before switch to xx_sigdeliver(), then we need
reset the critical_section state before swith back.
Fix:
Add condition to cover saved_irqcount == 0.
Change-Id: I4af7f95e47f6d78a4094c3757d39b01ac9d533b3
Signed-off-by: ligd <liguiding1@xiaomi.com>
This Knob will cycle through the values from
low to high. To avoid damaging the crystal.
We want to use the lowest setting that gets
the OSC running. See app note AN2867
This Knob will cycle through the correct*
values from low to high. To avoid damaging
the crystal. We want to use the lowest setting
that gets the OSC running. See app note AN2867
*It will take into account the rev of the silicon
and use the correct code points to achive the drive
strength. See Eratta ES0392 Rev 7 2.2.14 LSE oscillator
driving capability selection bits are swapped.
With TrustZone support in armv8-m the bit-fields in EXC_RETURN have been
extended. Bit 6 ('S') now specifies whether the interrupted program was
running in the Non-Secure (S=0) or Secure (S=1) security state.
Furthermore, Bit 0 ('ES' - Exception Secure) specifies the
security state athe exception is taken to (0: Non-Secure, 1: Secure).
When NuttX is run together with TrustedFirmware-M as the application in
the non-secure world both the S and the ES bits have to be set to '0'.
For armv8-m those are also the correct values if TrustZone is not
implemented on the respective MCU or if it is disabled.
Signed-off-by: Michael Jung <mijung@gmx.net>
Summary:
- This commit applies armv7-m signal handling logic
Impact:
- armv6-m signal handling
Testing:
- Tested with ostest with the following configs
- raspberrypi-pico:nsh, raspberrypi-pico:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds 'select ARM_HAVE_WFE_SEV' to ARCH_CHIP_RP2040
- Now NuttX spinlock uses WFE/SEV to reduce power consumption
- Also, modify a comment on rp2040
Impact:
- rp2040 only
Testing:
- Tested with raspberrypi-pico:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- In the previous implementation, the build system stops if
PICO_SDK_PATH is not set.
- However, this behavior is not good for CI. Because the path
is only used to generate a flash image.
- This commit fixes this issue
Impact:
- rp2040 only
Testing:
- Tested with and without PICO_SDK_PATH
This change reflects that the geometry isn't related to the largest
allocatable unit on the platform.
Calls to read and write block devices are also affected and have
been updated.
Check if all messages were transferred, if not, return -ENXIO.
This is particularly useful when the slave returns an unexpected NAK,
the application code should catch the error to avoid failing silently.
Summary:
- This commit introduces driver-specific spinlock in cxd56_serial.c
to improve performance
Impact:
- SMP only
Testing:
- Tested with spresense:wifi and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes style warnings under max32660
- Also fix compile errors in max32660_gpio.c with CONFIG_DEBUG_GPIO_INFO=y
Impact:
- None
Testing:
- Built with max32660-evsys:nsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- In the previous imxrt_enet.c, imxrt_enet.c assumed that
CONFIG_NET_ETH_PKTSIZE includes the ethernet CRC (4bytes)
- However, most of the driver implementation explicitly
add CONFIG_NET_GUARDSIZE for the CRC to the internal buffer
- This commit conforms to such rules
Imapct:
- No impact
Testing:
- Tested with iperf with imxrt1060-evk
- NOTE: need to add the following configs
+CONFIG_EXAMPLES_IPERF=y
+CONFIG_EXAMPLES_IPERFTEST_DEVNAME="eth0"
+CONFIG_IOB_NBUFFERS=128
+CONFIG_NET_ETH_PKTSIZE=1514
+CONFIG_NET_GUARDSIZE=4
+CONFIG_RR_INTERVAL=200
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Port C was not working because the GPIO pin count was
wrong. The 48 pin packages has 34 GPIO (Not counting PH0 & PH1)
It is GPIOA GPIO B (sans PB11) and GPIOC PC13-PC15
The calls via RTC API weren't fast enough for the edge case
of minimum counter value, resulting in the timer never
expiring as the counter had already passed the compare value.
This now uses direct register access functions and also
gets the latest counter value in edge case.
The MCAN driver private structure has been renamed to struct sam_mcan_s,
but some functions reference sam_can_s. There are missing defines
of return variable in some functions.
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
Summary:
- This commit fixes a compile error in imx_enet.c
with CONFIG_DEBUG_ASSERTIONS=y
Impact:
- None
Testing:
- Tested with sabre-6quad:netnsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes imx_enet.c if CONFIG_IMX_ENET_NTXBUFFERS=1
- Also adds some ninfo() debug messages
Impact:
- imx_enet.c only
Testing:
- Tested with sabre-6quad:netnsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Since imx_enet.c is based on imxrt_enet.c and still under debugging,
the differences should be minimum to keep tracking the changes
Impact:
- None
Testing:
- Tested with sabre-6quad:netnsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The stm32f412 was not a clean port. This is one step to fix
it. The shortcuts taken has caused more wasted hours finding
bad pin mappings then doing the job correctlry to begin with.
stm32:Kconfig Add CAN2 on STM32F412
This bug made certain values of DRIVE setting
to be wrongly applied (which can be dangerous
under certain situations since for example H0D1
was mapped to H0H1).
Summary:
- This commit fixes DEBUGASSERT in lm3s_ethernet.c
Impact:
- lm3s_ethernet.c only
Testing:
- Tested with lm3s6965-ek:discover with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes a compile warning in cxd56_sdhci.c
Impact:
- None
Testing:
- Built with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit replaces SHES related headers under cxd56xx
Impact:
- No impact
Testing:
- Build check only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds imx_enet driver derived from imxrt_enet
Impact:
- imx6 only
Testing:
- Tested with sabre-6quad:netnsh
- NOTE: telnetd works with QEMU
Summary:
- This commit fixes peripheral IP offsets in AIPS-2
Impact:
- No impact because there is no drivers
Testing:
- Tested with sabre-6quad:nsh and sabre-6quad:smp
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
When the architectural support for STM32G4 family was added, the
reference manual (RM0440) was at revision 2. Since then, it has
undergone several revisions. One significant change is in the
table of FLASH wait states: section 3.3.3 table 9. The outcome
of this change is that fewer FLASH wait states are needed for
most CPU clock (HCLK) frequencies. Notably, if running the CPU
clock at the maximum 170 MHz, only 4 FLASH wait states are
needed, rather than the previously programmed 8 wait states.
This gives a noticeable performance boost.
arch/arm/src/stm32/stm32g4xxxx_rcc.c:
* FLASH_ACR_LATENCY_SETTING: Reimplement compile-time logic
that selects the required wait state setting to use the new
updated table.
* Update all comments to indicate that RM0440 Rev 5 is used.
* Update section numbers mentioned in comments in cases where
they have changed due to added sections in the manual.
arch/arm/src/stm32/hardware/stm32_adc_v2g4.h:
* New file.
arch/arm/src/stm32/hardware/stm32_adc.h:
* Distinguish between the normal STM32 ADC IPv2 core and the
modified IPv2 core used in the G4 family, and include either
stm32_adc_v2.h or stm32_adc_v2g4.h as needed.
Summary:
- This commit introduces SP_WFE() and SP_SEV() to be used for spinlock
- Also, use wfe/sev instructions for ARMV7-A to reduce power consumption
Impact:
- ARMV7-a SMP only
Testing:
- sabre-6quad:smp (QEMU, dev board)
- maix-bit:smp, esp32-devkitc:smp, spresense:smp sim:smp (compile only)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Because this_task() returns the current task of the current CPU
Impact:
- SMP only
Testing:
- Tested with sabre-6quad:smp (QEMU)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes global IRQ control logic
- In previous implementation, g_cpu_irqset for a remote CPU was
set in sched_add_readytorun(), sched_remove_readytorun() and
up_schedule_sigaction()
- In this implementation, they are removed.
- Instead, in the pause handler, call enter_critical_setion()
which will call up_cpu_paused() then acquire g_cpu_irqlock
- So if a new task with irqcount > 1 restarts on the remote CPU,
the CPU will only hold a critical section. Thus, the issue such as
'POSSIBLE FOR TWO CPUs TO HOLD A CRITICAL SECTION' could be resolved.
- Fix nxsched_resume_scheduler() so that it does not call spin_clrbit()
if a CPU does not hold a g_cpu_irqset
- Fix nxtask_exit() so that it acquires g_cpu_irqlock
- Update TODO
Impact:
- All SMP implementations
Testing:
- Tested with smp, ostest with the following configurations
- Tested with spresense:wifi_smp (NCPUS=2,4)
- Tested with sabre-6quad:smp (QEMU, dev board)
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
