sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
27,554 Commits 1 Branch 0 Tags 291 MiB
db24f237d7
Commit Graph

9551 Commits

Author SHA1 Message Date
Lok Tep
7d7354f961 merge 2016-09-27 16:05:57 +02:00
Young
7f32019a76 Add a new ioctl command (set MAXPOS) for tiva QEI 2016-09-26 18:10:06 +08:00
Mateusz Szafoni
9742757f26 Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not present in RMII 2016-09-22 10:05:45 +02:00
Gregory Nutt
d2e03daeb1 Fix some strange spacing apparently introduced by tools/indent.sh 2016-09-21 16:06:05 -06:00
Gregory Nutt
54eee5b303 Review of PR 135 2016-09-21 09:36:39 -06:00
Young
cf99e50b7a Add QEI lower-half driver impl. for Tiva series chip 2016-09-21 17:08:31 +08:00
Gregory Nutt
1c20376e39 SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7 2016-09-20 15:33:31 -06:00
Wolfgang Reißnegger
3f22b63321 SAM3/4: Fix GPIO pull-up/down code. 
Enabling the pull-down resistor while the pull-up resistor is still enabled
is not possible. In this case, the write of PIO_PPDER for the relevant I/O
line is discarded. Likewise, enabling the pull-up resistor while the
pull-down resistor is still enabled is not possible. In this case, the
write of PIO_PUER for the relevant I/O line is discarded.
 2016-09-20 13:32:04 -07:00
Gregory Nutt
ed22c93d7a Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y 2016-09-20 13:02:24 -06:00
Gregory Nutt
4dc3521743 All SAM Ethernet Drivers: Add support so that the drivers can be built with CONFIG_NET_MULTIBUFFER=y 2016-09-20 08:56:36 -06:00
Gregory Nutt
7f1a88e243 Pierre's assertion-avoidance change should also be applied to STM32 F7 and L4 2016-09-15 08:41:49 -06:00
Pierre-noel Bouteville
829de7d5bd Set USB address to avoid a failed assertion 2016-09-15 08:36:45 -06:00
Jim Wylder
5d73f114b5 STM32L4: Add support for USART3-USART5 
For STM32L4 parts, the higher number USART ports supported
varies.  Add the HAVE_USARTx definitions to the configuration
to allow enabling the higher numbered USART ports.

Signed-off-by: Jim Wylder <jwylder@motorola.com>
 2016-09-14 15:20:18 -05:00
Sebastien Lorquet
50dd745e23 restore stm32l4 name 2016-09-07 14:17:38 +02:00
Sebastien Lorquet
87d2f86968 Register renames to allow stm32l4 usb device compilation 2016-09-05 08:50:09 +02:00
David Sidrane
944902a24d F7 Usb Fix for FIFO loosing first word 2016-09-02 07:14:16 -10:00
David Sidrane
81ba54b650 Using uinfo 2016-09-02 03:50:26 -10:00
Sebastien Lorquet
e4a713477a Apply stm32 fix to stm32l4 2016-08-31 13:12:49 +02:00
Gregory Nutt
bef7f5be23 STM32 F7: Remove duplicate call to pkt_input from Ethernet driver. 2016-08-30 08:04:18 -06:00
Gregory Nutt
9c3bade7b4 net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck. 2016-08-30 07:59:57 -06:00
David Sidrane
f2809d52d3 stm32_otgfsdev.c edited online with Bitbucket 
dup SOF removed as noted by Sébastien Lorquet
 2016-08-26 17:20:38 +00:00
David Sidrane
87f4a8033a BugFix:Lost first word from FIFO 
1) Do not overwrite Reserved Bits in GINTSTS (per ref manual)*
    2) Acknowledge all pending int on entry to ISR that are Only rc_w1*
    3) Do not disable RXFVL*
    4) Loop until RXFVL is cleared*
    5) Only clear the NAK on the endpoint on the OTGFS_GRXSTSD_PKTSTS_SETUPDONE to
       not loose the first WORD of FIFO all the data  (Bug Fix)

Changed marked *are just driver clean up and ensure ints are not lost.
The bug fix is #5

Test case open putty and observer the Set/Get LineCoding
Without this fix #5 the Get will not match the Set, and
infact the data might be skewed by 4 bytes, that are lost
from the FIFO if the OTGFS_DOEPCTL0_CNAK bit is set in the
OTGFS_GRXSTSD_PKTSTS_SETUPRECVD as opposed to the OTGFS_GRXSTSD_PKTSTS_SETUPDONE

Set Line Coding DATA1: 4B | 00 c2 01 00 00 00 08 | c8 1B
Get Line Coding DATA1: 4B | .. .. .. .. 00 00 08   c8 .. 00 00 07 | 7a 72
 2016-08-25 06:51:52 -10:00
Gregory Nutt
4ebace37a9 Fix typos in LPC43 serial driver. Found by Vytautas Lukenskas 2016-08-24 10:34:56 -06:00
Aleksandr Vyhovanec
6bc952a2cc STM32: Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and STM32F107RC. 2016-08-24 10:10:33 -06:00
Gregory Nutt
ae37c9859f Cosmetic changes from review of PR 120 2016-08-19 06:32:28 -06:00
Michał Łyszczek
0f175039ad Fix compilation warnings for stm32 eth with certain configs 2016-08-19 09:18:18 +02:00
Gregory Nutt
c0074fd6b8 Merged in mlyszczek/nuttx/stm32butterfly2_board (pull request #118) 
add stm32butterfly2 development board
 2016-08-18 11:14:10 -06:00
Alan Carvalho de Assis
a3e1bdde14 STM32 SPI: Fix STM32F3XXX SPI driver to read 8-bit correctly. 2016-08-18 08:38:49 -06:00
Gregory Nutt
3c58e8e9b4 SAMA5: Add oneshot max_delay method 2016-08-18 08:11:40 -06:00
Gregory Nutt
d369eeec95 Remove a misleading comment 2016-08-18 07:13:04 -06:00
Gregory Nutt
01ae660c6c Merged in K-man23/nuttx/stm32_adc_fix (pull request #117) 
Change stm32 adc dma callback to send channel number instead of index
 2016-08-17 14:05:37 -06:00
Konstantin Berezenko
9b3bbc0f09 Change stm32 adc dma callback to send channel number instead of index 2016-08-17 13:02:36 -07:00
Gregory Nutt
319ad528cd Revert "sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error." 
This reverts commit 5d5851a5cd.
 2016-08-17 12:34:54 -06:00
Michał Łyszczek
a05d9c18da Add connectivity line stm32 to be able to compile SYSCFG, add definitions for 
usb clock divs
 2016-08-17 20:11:15 +02:00
Konstantin Berezenko
42ee88fe89 STM32F411 and STM32F446 map i2c2_sda_4 to different alternate function numbers 2016-08-17 11:01:44 -07:00
Piotr Mienkowski
5d5851a5cd sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error. 2016-08-17 09:51:54 -06:00
Gregory Nutt
17e5da96ea SAMV7: DAC1 not available GMAC is enabled 2016-08-17 07:14:59 -06:00
Gregory Nutt
e57891b41f Kinetis I2C: Review and extend I2C register definitions for K40 and K60 2016-08-16 12:17:23 -06:00
Gregory Nutt
a337494221 Kinetis I2C: Remove literal hex register values. Replace with symbolic definitions from kinetis_i2c.h 2016-08-16 11:44:04 -06:00
Gregory Nutt
7f4488dc80 Review I2C register definitions and add support for the K64 2016-08-16 10:18:52 -06:00
Gregory Nutt
a3b061e54f Kinetis: Add support for I2C2 2016-08-16 10:02:28 -06:00
Gregory Nutt
be83e73957 Kinetis I2C: Add comments, DEBUGASSERTions, and some I2C debug output. 2016-08-16 08:42:30 -06:00
Gregory Nutt
32c1189f51 Re-order some fields so that the structure packs better and so is smaller. 2016-08-16 08:20:55 -06:00
Gregory Nutt
f40bb14495 Kinetis: Add support for I2C1 2016-08-16 07:21:03 -06:00
Gregory Nutt
3f48392974 Add defaults in SAMV7 configuration for all DAC settings 2016-08-15 10:22:12 -06:00
Gregory Nutt
e53118ffc2 SAMV7 DAC configuration needs some conditional logic 2016-08-15 08:55:11 -06:00
Gregory Nutt
c367e4985f Add configuration logic for the SAMV7 DAC module 2016-08-15 08:21:46 -06:00
Piotr Mienkowski
053aea552f Add support for SAMV7 DACC module 2016-08-15 08:00:36 -06:00
Gregory Nutt
f84780f36e Changes from review of PR 114 2016-08-14 13:38:47 -06:00
Gregory Nutt
2b32869b49 Merged in v01d/nuttx/kinetis-i2c-norestart (pull request #114) 
support NORESTART on kinetis i2c
 2016-08-14 13:27:39 -06:00
v01d
239c56f3b9 support NORESTART 2016-08-14 16:25:18 -03:00
Gregory Nutt
014b8268cc Minor stylistic corrections 2016-08-14 10:14:28 -06:00
Gregory Nutt
45e71a140a Fix some alignment and long line issues 2016-08-13 18:04:09 -06:00
Gregory Nutt
3023724cf2 Changes from review of PR 113 2016-08-13 17:32:35 -06:00
Gregory Nutt
8315b051ca Merged in v01d/nuttx/kinetis_i2c (pull request #113) 
I2C and RTC support for Kinetis
 2016-08-13 16:54:14 -06:00
Gregory Nutt
8052dc4955 STM32 SPI: nbits should be unsigned. Valid range is 4-16 for F3 and L4. 8 or 16 for others. 2016-08-13 16:01:50 -06:00
v01d
5a97def131 kinetis k20 i2c fixed 2016-08-13 18:48:45 -03:00
Gregory Nutt
1a10518dae Update ChangeLog 2016-08-13 12:03:12 -06:00
Gregory Nutt
eed5e41626 Add some comments 2016-08-13 10:24:40 -06:00
Gregory Nutt
172761163b STM32F3 SPI: Cannot write 16-bit value to DR register because of how the F3 implements data packing. 2016-08-13 10:11:23 -06:00
Gregory Nutt
51fcd89b98 Add and fix some SPI debug output 2016-08-13 08:31:37 -06:00
Gregory Nutt
42202c6365 STM32 and STM32L4: Enabling DMA loses other bits in CR2 2016-08-13 08:01:41 -06:00
Gregory Nutt
efc9f674d2 Trivial changes to comments and spacing 2016-08-13 07:50:54 -06:00
Alan Carvalho de Assis
805cb5c752 STM32F3 SPI: Fix a typo 2016-08-13 07:23:48 -06:00
Gregory Nutt
da5563c0e7 STM32: Add conditional logic for STM32F37xx 2016-08-13 06:43:13 -06:00
Gregory Nutt
10f90a1738 STM32 F3: Fix more SPI issues 2016-08-12 19:00:34 -06:00
Gregory Nutt
3383a25c38 Some logic missing from last commit 2016-08-12 18:40:25 -06:00
Gregory Nutt
afb02b56d4 STM32F3 SPI: Fix the number of bit setting for the F3. It works differently than for other parts. 2016-08-12 18:32:37 -06:00
Gregory Nutt
046acf6b54 Add a simulated oneshot lowerhalf driver 2016-08-12 13:14:03 -06:00
Gregory Nutt
b4e8876b09 Correct some spacing 2016-08-12 12:41:49 -06:00
Gregory Nutt
82b86cdcf3 oneshot interface: max_delay method should return time in a standard struct timespec form. 2016-08-12 11:33:10 -06:00
Gregory Nutt
89135c55e4 drivers/timer: Add an upper-half, oneshot timer character driver. 2016-08-12 10:40:07 -06:00
Gregory Nutt
61b0ac06bf Missed a dependency in last set of commits 2016-08-11 17:20:12 -06:00
Gregory Nutt
1965e25da4 STM32L4: Add oneshot lower half driver. 2016-08-11 17:14:41 -06:00
Gregory Nutt
a5a776e223 SAM4CM: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver. 2016-08-11 17:04:19 -06:00
Gregory Nutt
fa6866b046 SAMA5: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver. 2016-08-11 16:47:17 -06:00
Gregory Nutt
b4d4a74059 SAMV7: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver. 2016-08-11 16:27:01 -06:00
Gregory Nutt
d0ce5b1d1e Cosmetic changes to comments and function prototypes 2016-08-11 15:15:37 -06:00
Gregory Nutt
fb349508fd STM32 oneshot lower-half: Missed some data initialization. 2016-08-11 14:57:17 -06:00
Gregory Nutt
eb3a565153 STM32: Add oneshot lower half to build system. Fix some build problems. 2016-08-11 14:53:39 -06:00
Gregory Nutt
1bb93021df STM32: Add a experimental oneshot, lower-half driver for STM32 2016-08-11 14:07:43 -06:00
Gregory Nutt
0e35bad987 Update some comments 2016-08-11 10:12:04 -06:00
Gregory Nutt
accbccd78a Merged in mlyszczek/nuttx/stm32f1connline_pllfix (pull request #111) 
Fix bad pllmul values for stm32f1xx connectivity line.
 2016-08-11 06:44:19 -06:00
Michał Łyszczek
81df56086a Fix bad pllmul values for stm32f1xx connectivity line. 
stm32f1xx connectivity line supports only x4, x5, x6, x7, x8, x9 and x6.5 values
 2016-08-11 10:49:57 +02:00
Young
e30a3b780c Fix two bugs of tiva pwm lower-half driver impl. 2016-08-10 13:25:43 +08:00
Gregory Nutt
7823a1680e Update a comment 2016-08-09 17:08:03 -06:00
Gregory Nutt
698d6d1294 SAM3/4: Extend clocking logic to enable clocking on ports D-F 2016-08-09 17:05:11 -06:00
Gregory Nutt
0918dd98ab Merged in gnagflow/nuttx (pull request #109) 
SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is configured as input.
 2016-08-09 16:40:48 -06:00
Gregory Nutt
fdcf0f7e5f Correct some comments 2016-08-09 15:15:21 -06:00
Wolfgang Reissnegger
cf35bb0b18 SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is configured as input. 
The value of a GPIO input is only sampled when the peripheral clock for
the port controller the GPIO resides in is enabled. Therefore we need
to enable the clock even when polling a GPIO.
 2016-08-09 13:23:05 -07:00
Gregory Nutt
b5b7a21bb6 Make reference count a uin16_t and save a couple of bytes. 2016-08-09 13:54:57 -06:00
Gregory Nutt
8b5833f7fe A consequence of Max's change to the logic to enable access to the backup domain is that every call to enabledbkp(true) must be followed by a matching call to enablebkp(false). There was one cse in both RTCC drivers where that may not always be true. 2016-08-09 11:33:47 -06:00
v01d
f715e9b787 RTC working, I2C in progress 2016-08-09 14:01:27 -03:00
Gregory Nutt
5d91b8cabb With last change, stm32_pwr_enablebkp() no longer returns a value 2016-08-09 07:50:31 -06:00
Max Neklyudov
1e3ccbac12 Make stm32_pwr_enablebkp thread safe 2016-08-09 07:36:13 -06:00
Alan Carvalho de Assis
8499f42bf9 Add STM32F37XX DMA channel configuration 2016-08-08 13:29:53 -06:00
Alan Carvalho de Assis
fcf1ae7e05 stm32f37xx: Fix SYSCFG_EXTICR_PORTE defined twice 2016-08-08 12:59:29 -06:00
Alan Carvalho de Assis
834f058573 I'm using NuttX on STM32F373 and saw the config was missing SPI2 and 
SPI3, see datasheet:
www.st.com/resource/en/datasheet/stm32f373cc.pdf

I searched for other members of STM32F37XX family and they also have 3 SPIs:
http://www.st.com/content/st_com/en/search.html#q=STM32F37-t=keywords-page=1
 2016-08-08 12:25:15 -06:00
Gregory Nutt
6df28bc74e Make bit-order SPI H/W feature configurable for better error detection 2016-08-08 11:54:13 -06:00
Gregory Nutt
c3cfd37791 Fix cloned variable error in all SPI drivers 2016-08-08 11:04:01 -06:00
Gregory Nutt
2ae3953f9e STM32/EFM32: If any hardware feature other and LSBFIRST is selected, return -ENOSYS. 2016-08-08 10:37:28 -06:00
Gregory Nutt
7d4cb73bd6 STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers. 
This change three things:  (1) It adds HWFEAT_LSBFIRST as a new H/W feature.  (2) It changes the implementations of SPI_SETBITS in the STM32 and EFM32 derivers so that negated bit numbers are simply errors and it adds the SPI_HWFEATURES method that can set the LSB bit order, and (3) It changes all calls with negative number of bits from all drivers: The number of bits is now always positive and SPI_HWFEATUREs is called with HWFEAT_LSBFIRST to set the bit order.
 2016-08-08 08:28:13 -06:00
v01d
d483f7939f I2C0 support for kinetis/teensy-3.x (to be tested) 2016-08-06 22:23:59 -03:00
Gregory Nutt
56f2454c86 Fix names of pre-processor variables used in header file idempotence 2016-08-06 18:48:45 -06:00
Gregory Nutt
f5ae207516 Changes from Review of last PR adding Tiva PWM driver 2016-08-05 07:17:42 -06:00
Young
2994decd3c Add tiva PWM lower-half driver implementation 2016-08-05 18:53:25 +08:00
Gregory Nutt
d9314c1034 LPC43xx ADC: board.h should be included last; Also, unreleated, update tools/README.txt 2016-07-30 07:05:10 -06:00
Gregory Nutt
309480d0f9 Merge branch 'timekeeping' of bitbucket.org:nuttx/nuttx 2016-07-28 09:34:00 -06:00
Gregory Nutt
59f626313d Changes from review of last PR 2016-07-25 15:16:51 -06:00
Gregory Nutt
250b9d5597 Merged in JordanMacIntyre/nuttx/PWM_driver (pull request #106) 
Pwm_driver
 2016-07-25 14:59:45 -06:00
jmacintyre
f5ea811c97 create PWM driver, still having issues with building 2016-07-25 14:17:07 -05:00
Stefan Kolb
899a8aa2f0 SAMV7 TRNG: Missing endif. 2016-07-25 12:30:39 -06:00
Gregory Nutt
e895e19b9f Minor changes from review of last PR 2016-07-24 07:45:46 -06:00
Wolfgang Reissnegger
c0fa319f2b SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. 
This fixes a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
 2016-07-23 20:11:04 -07:00
Wolfgang Reissnegger
cc191a977d SAM3/4 UDP: Remove redundant EP state assignment. 2016-07-23 20:11:03 -07:00
Wolfgang Reissnegger
f3a6a40f62 SAM3/4 Serial: Fix warning when CONFIG_SUPPRESS_UART_CONFIG is set. 2016-07-23 16:23:49 -07:00
Gregory Nutt
9b9b721406 Rename alarm_enable to rtc_alarm_enabled; mark inline 2016-07-23 12:01:57 -06:00
Gregory Nutt
5a0f9fcb7d Fix STM32 RTC Alarm interrupts. They were being enabled BEFORE the interrupt system was being initialized. 2016-07-23 10:36:06 -06:00
Gregory Nutt
14de4b99f8 Simplify some computations 2016-07-23 08:13:25 -06:00
Gregory Nutt
0984fcda44 Back out last RTC alarm changes. I am mistaken, the interrupts are enabled by stm32[l4]_exti_alarm(). 2016-07-23 07:53:08 -06:00
Gregory Nutt
65ac11692d STM32L4 RTC is cloned from F4; needs same fix. 2016-07-23 07:33:44 -06:00
Gregory Nutt
829c5610da STM32 F4 RTC ALARM: Was not enabling interrupts. 2016-07-23 07:19:14 -06:00
Gregory Nutt
3aea9b8bf3 Rename KL version of CONFIG_GPIO_IRQ to CONFIG_KL_GPIOIRQ 2016-07-22 14:34:21 -06:00
Gregory Nutt
5386403476 Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ 2016-07-22 14:30:37 -06:00
Gregory Nutt
264578135d Rename LP11xx version of CONFIG_GPIO_IRQ to CONFIG_LPC11_GPIOIRQ 2016-07-22 14:23:31 -06:00
Gregory Nutt
360efe03c1 Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ 2016-07-22 14:18:30 -06:00
Gregory Nutt
369c942605 uint8_t is big enough for global. Range of values only 2-10 2016-07-21 15:18:27 -06:00
Gregory Nutt
67900beaaa LP43 Heap: REALLY eliminate the warning this time 2016-07-21 15:15:56 -06:00
Gregory Nutt
d5acc120a4 Kinetis K60: Fix some bad conditional compilation 2016-07-21 14:22:00 -06:00
Gregory Nutt
a2035f7efd Move include/nuttx/1wire.h to include/nuttx/drivers/1wire.h 2016-07-21 13:51:28 -06:00
Gregory Nutt
96d5b734a8 Add missing TWI definitions 2016-07-21 08:01:59 -06:00
Gregory Nutt
0d98507af1 Eliminate a warning 2016-07-20 16:47:23 -06:00
Gregory Nutt
1b9b3a7b47 pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Sagitta Li
e07bd757ba STM32 F107: TIM8 not supported in F105/F107 2016-07-20 08:51:03 -06:00
Vytautas Lukenskas
ac2a5e079c Add change missing in Make.defs for last LPC43xx change 2016-07-19 09:28:15 -06:00
Vytautas Lukenskas
f222d37aa7 Extend LPC43xx EMC code to support SDRAM on a dynamic memory interface. 2016-07-19 07:11:04 -06:00
Gregory Nutt
2119c5ce19 Fix another function naming error 2016-07-18 12:40:27 -06:00
Gregory Nutt
d36da2b560 Fix bad dev[u]random_register() function return value. 2016-07-18 12:25:05 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
078bbe5e5c All H/W RNG Drivers: Can now be configured to register as /dev/random and/or /dev/urandom 2016-07-18 11:10:37 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Young
7005fafb95 Fix a bug of tiva i2c ports configuration 2016-07-15 11:03:48 +08:00
Gregory Nutt
18059d6821 Restore Wolfgang Reissnegger's PR as submitted. My mistake is it late here. 2016-07-14 18:39:51 -06:00
Wolfgang Reissnegger
f982180ec7 SAM3/4 Timer: Remove broken definitions for BMR register. 
Per documentation SAM4S and SAM4E have the BMR register values
as they are already defined. No need for chip specific values.

In addition:
 - CONFIG_ARCH_CHIP_SAM4s has wrong lower case 's' so the definitions would
   not be used anyways for SAM4S builds.
 - TC_BMR_TC2XC2S_TIOA2 does not make sense. There is no way to loop back
   TC2's TIOA2 into itself.
 2016-07-14 18:17:05 -06:00
Gregory Nutt
54bc6c88dd Fix cast of return value 2016-07-14 10:21:31 -06:00
Gregory Nutt
3f6835fda9 If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do actual write (probably copy/paste errors). Still not sure about current state of lpc43_spifi implementation, but for me NXFFS works with this patch. From Vytautas Lukenskas. 2016-07-14 10:11:19 -06:00
Pierre-noel Bouteville
76f12b1f69 I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization. 2016-07-14 07:29:39 -06:00
Gregory Nutt
72582b61d9 Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #98) 
port foward bugfix from stm32 of oneshot timer
 2016-07-13 16:09:18 -06:00
ziggurat29
9a6c5b271a port foward bugfix from stm32 of oneshot timer 2016-07-13 17:00:06 -05:00
Gregory Nutt
37e10a54ae Kinetis: Eliminate a warning. Freedom-K64F: Update a README file 2016-07-13 15:38:47 -06:00
Gregory Nutt
beaca7a17f Merge remote-tracking branch 'origin/master' into timekeeping 2016-07-13 10:22:38 -06:00
Max Neklyudov
067f63fc18 STM32: Fix bug in oneshot timer 2016-07-13 10:20:38 -06:00
Stefan Kolb
f673b2d02a This commit solves a problem which causes data loss while sending data via USB. This problem is caused by an incorrect handling of the endpoint state in the USB driver sam_usbdevhs. This leads under some circumstances to situations in which an DMA transfer is setup while a previous DMA transfer is currently active. Amongst other things I introduced the new endpoint state USBHS_EPSTATE_SENDING_DMA for the fix. 
To reproduce the problem, I used a program which send as many data as possible via a CDC/ACM device and verified the received data on the PC.
 2016-07-13 10:09:14 -06:00
Gregory Nutt
a7d8279714 Kinetis and Freedom-K64F: Remove unused configuration variable; fix some compile issues; SDHC is now enabled in the nsh configuration (but does not work) 2016-07-13 09:56:02 -06:00
Gregory Nutt
2f12de6f28 Freedom-K64F: Add hooks for automounter; Change NSH configuration to use Windows 2016-07-13 09:23:57 -06:00
Sebastien Lorquet
590af73bd2 STM32L4 Serial: Remove some STM32Fxxx conditional logic; fix a link error resulting from an over-aggressive rename. 2016-07-13 07:10:09 -06:00
Gregory Nutt
76a0cccbb1 K6x Ethernet: Fix some conditional logic 2016-07-13 07:04:19 -06:00
Sebastien Lorquet
6be72272eb STM32L4: Apply the stm32l4 namespace and FAR qualifiers to the serial driver, also, indentation. 2016-07-12 17:18:46 -06:00
Gregory Nutt
dee77a5dd9 Kinetis Ethernet: Add support for CONFIG_NET_NOINTS 2016-07-12 16:17:35 -06:00
Gregory Nutt
10667bd38a Kinetis Ethernet and Freedcom-K64F: PHY address was wrong. Modified driver to try all PHY addresses and then only fail if the driver cannot find a usable PHY address. MDIO pin must have an internal pull-up on the Freedom-K64F. 2016-07-12 14:09:27 -06:00
Gregory Nutt
c8f053de92 Kinetis Ethernet: Add support for the KSZ8081 PHY 2016-07-12 09:59:08 -06:00
Gregory Nutt
38999dfe9d Fix two incorrectly named header files 2016-07-12 09:46:31 -06:00
Gregory Nutt
f816e7a69b Merged in slorquet/nuttx/pr_fixes (pull request #95) 
Pr_fixes
 2016-07-11 17:07:40 -06:00
Sebastien Lorquet
4172016667 revert changes made by greg 2016-07-12 01:04:15 +02:00
Sebastien Lorquet
5e12d6203e Cosmetic changes after PR 94 2016-07-12 00:57:18 +02:00
Gregory Nutt
9dd70ffbae Freedom K64F: Green and Blue LEDs reversed 2016-07-11 16:54:20 -06:00
Gregory Nutt
c80b627e8d Partial review of last PR 2016-07-11 16:28:54 -06:00
Sebastien Lorquet
749b54fbda PR fixes for oneshoot and freerun 2016-07-12 00:16:08 +02:00
Gregory Nutt
a48fb1e41c Merged in slorquet/nuttx/stm32l4_renames (pull request #94) 
stm32l4_renames
 2016-07-11 16:05:27 -06:00
Sebastien Lorquet
4f5d22c940 fix a typo 2016-07-12 00:03:38 +02:00
Sebastien Lorquet
3a873a44ef renames in USB OTG 2016-07-11 23:59:24 +02:00
Sebastien Lorquet
4dd020784a renames in tickless 2016-07-11 23:57:57 +02:00
Gregory Nutt
fb1855244e STM32 timer: Eliminate a warning 2016-07-11 13:13:17 -06:00
Sebastien Lorquet
ce09af0da7 Rename STM32L4 PWM routines. this WILL BREAK configs 2016-07-11 19:13:06 +02:00
Sebastien Lorquet
d347d7ce7e renames in oneshoot 2016-07-11 19:06:14 +02:00
Sebastien Lorquet
34a7b0ea8e Renames stm32_ -> stm32l4_ on old files and rtcc/basic timers 2016-07-11 19:05:09 +02:00
Gregory Nutt
246773faa7 Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name. 2016-07-11 06:54:02 -06:00
Max Neklyudov
8db29071da timekeeping: initial implementation 2016-07-10 16:14:25 -06:00
Wolfgang Reissnegger
d89e062c06 SAM3/4 I2C: Fix reversed logic in twi_startmessage(). 2016-07-09 06:51:07 -06:00
ziggurat29
ee55a0b9a3 update README.txt to reflect new implementation status 2016-07-08 17:33:38 -05:00
ziggurat29
af236d4784 STM32L4: add support for tickless OS, and incidentally timers, pwm, oneshot, free-running.... 2016-07-08 17:30:55 -05:00
ziggurat29
0207f6699a port and bit definitions for the various timers on the STM32L4. whew. 2016-07-08 17:26:40 -05:00
ziggurat29
106f87d9ed fix incorrect clock setup for LPTIM1 2016-07-08 16:37:44 -05:00
Gregory Nutt
7473d3f859 Trivial changes from review of PR 2016-07-08 08:03:44 -06:00
Gregory Nutt
75e2f37dd2 Merged in david_s5/nuttx (pull request #89) 
stm32_serial.c edited online with Bitbucket
 2016-07-08 06:40:24 -06:00
Gregory Nutt
591c099470 Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #88) 
Upstream_nucleo 144
 2016-07-08 06:35:46 -06:00
David Sidrane
06036a5841 stm32_serial.c edited online with Bitbucket 2016-07-08 01:56:37 +00:00
David Sidrane
deb3e8143c STM32F7 - DMA working on SDMMC 2016-07-07 15:49:47 -10:00
David Sidrane
f8d3a872ee FIxed STM32F& DMA stm32_dmacapable 2016-07-07 15:49:21 -10:00
ziggurat29
42820c0938 update usb dev/host controller drivers to reflect new(ish) logging standards; augment device enpoint and fifo allocation #defines to do more sanity checking, and be automatically adaptive to size changes. Update README.txt to reflect current status of the implementation. 2016-07-07 13:54:35 -05:00
ziggurat29
7c428efa97 Merge branch 'master' into stm32l4_usb 
Conflicts:
	configs/stm32l476vg-disco/nsh/defconfig
 2016-07-07 12:27:20 -05:00
Gregory Nutt
c16500dfdb STM32 timer. More clean up: Add all function prototypes. Reorder functions to match ordering in operations structure. 2016-07-06 14:24:59 -06:00
Gregory Nutt
7c568f249a STM32: Various fixed to get a clean compile after integrating tickless mode. Mostly because patch came from an old version of NuttX. 2016-07-06 13:37:08 -06:00
Gregory Nutt
711f3318c5 STM32 timer: Reorganize to conform better with the NuttX coding style 2016-07-06 13:36:17 -06:00
Max Neklyudov
d8286a7f47 STM32: Add support for Tickless mode (two timer implementation) 2016-07-06 12:48:30 -06:00