Commit Graph

3582 Commits

Author SHA1 Message Date
Gregory Nutt
f26384c386 Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3 2014-12-21 15:23:37 -06:00
Gregory Nutt
3ea03b9806 Improved comments 2014-12-21 14:09:04 -06:00
Gregory Nutt
f4543de408 TM4C129X: Increated power/clocking macros into I2C driver 2014-12-21 13:02:12 -06:00
Gregory Nutt
20986de89e TM4C129X: Add macros to enable/disable peripheral power 2014-12-21 11:40:39 -06:00
Gregory Nutt
9857b59e79 Tiva SSI: Use portable macros to enable peripheral clocking 2014-12-21 11:16:21 -06:00
Gregory Nutt
8ed83ac3a5 Tiva: More run mode clock enable macros 2014-12-21 11:02:56 -06:00
Gregory Nutt
d701532141 TM4C129X: Framework for new Tiva clocking logic (details not yet implemented) 2014-12-21 10:14:40 -06:00
Gregory Nutt
36acfdb26f Tiva: Completes first cut at system control header file 2014-12-20 12:05:22 -06:00
Gregory Nutt
22b4def56e Tiva: More TM4C129 system control register definitions 2014-12-20 11:10:10 -06:00
Gregory Nutt
e14608b272 Tiva: More TM4C129 system control register definitions 2014-12-20 09:59:21 -06:00
Gregory Nutt
b49f8b3baf Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h 2014-12-20 08:38:11 -06:00
Gregory Nutt
ffae2cb3d7 Tiva: Updates to system control regiser definitions 2014-12-20 08:22:17 -06:00
Gregory Nutt
16a302e732 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
44d72c6545 stm32: Add configuration option for ltdc
This adds the following ltdc configuration options:
- dither support
- cmap support, is this the right place for CONFIG_FB_CMAP?
- support for extended ltdc interface

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:58:39 -06:00
Gregory Nutt
193edfb7be stm32: implements ltdc frambuffer and support for ltdc layer operation
This implements the framebuffer support for the generic nuttx framebuffer
interface, (see nuttx/video/fb.h)

This also implements the interface to perform hardware accelerated layer
operation by the ltdc controller and dma2d controller later (see
nuttx/video/ltdc.h).

The following methods are supported by the ltdc interface:

- getvideoinfo
  Get video information of the layer

- getplaneinfo
  Get plane information of the layer

- getlid
  Handle specific layer identifier. This allows to detect to current layer
  state (e.g. important for layer flipping)

- setclut
  Set the layer color lookup table. Up to 256 color entries supported.

- getclut
  Get the layer color lookup table

- setcolor
  Set the default layer color. In the context of the ltdc layer this means set
  the default color outside the active area or if the layer is disabled.

- getcolor
  Get the default layer color

- setcolorkey
  Set the layer colorkey (chromakey). Colorkey is enabled by blendmode
  LTDC_BLEND_COLORKEY

- getcolorkey
  Get the layer colorkey

- setalpha
  Set the constant alpha value. If blend mode LTDC_BLEND_SRCPIXELALPHA or
  LTDC_BLEND_DESTPIXELALPHA is defined than the blended color is calculated
  by the formel:
    Cdest = Pixelalpha * Constalpha * Csrc.
  Otherwise:
    Cest = Constalpha * Csrc

- getalpha
  get the alpha value

- setblendmode
  Set the layer blendmode.
  Supported blendmodes:
    non blendmode (do not perform blend operation independent on the layers
                   alpha and colorkey)
    alpha          alpha blending (transparency)
    destpixelalpha use pixel alpha value for the top layer (Layer2)
    srcpixelalpha  use pixel alpha value for the subjacent layer (Layer1)
    colorkey       enable colorkey

- getblendmode
  Get the layer blendmode

- setarea
  Set the active layer area, the visible rectangle inside the whole layer.
  This also allows to change the position of the whole layer which is visible in
  the selected area independent on the area position.

- getarea
  Get the active layer area

- update
  Reload the layer shadow register and make changes visible. Also supports
  layer flipping.

Note! Dithering and background color are static parameter and can only changed
at build time.

Implementation details:

The implementation of ltdc interface was inspired by SDL and DirectFB.
All layer settings are shadowed before they become active (except setclut).
They are still inactive until the layer is updated. This is done by the update
method. Should clut only active after an update or not? Clut is used for drawing
while the other settings usually used for blend or blit operations. So i think
this should be the right way.

The implementation of ltdc interface was inspired by SDL and DirectFB.
All layer settings shadowed before they become active (except clut).
They are still inactive until the layer is updated. This is done by the update
call. Should clut only activated after an update or not? Clut is used for draw
operation while the other settings usually used for blend or blit operations.
So i think this should be the right way.

Deviations from the ltdc hardware implementation:

- Shadow register update of both layer (Layer1 or Layer2) is independent as long
  LTDC_UPDATE_SIM is not set. This flag allows to update both layer simultaneous.
  Otherwise only the desired layer is updated.

Layer operation:

Keep in mind, both layer are allways active (of course if both enabled by the
configuration). First the Layer 1 is blended with the background color and the
result is blended with the Layer2. To avoid blend effects, set the Layer2 in non
blend mode. This is equal to blend with alpha = 255. Enable blending of Layer2
with the background color by enable blending of Layer1 and disable the opacity
by setting the alpha value to 0.

Layer flip:

A layer flip usual mean swapping two framebuffer. So the current inactive buffer
can refreshed with data while the active framebuffer is visible. A flip
operation changes the inactive layer to the active one and vice versa.

The ltdc implementation supports layer flip. This can be done by the update call
and the flag LTDC_UPDATE_FLIP. In this case ltdc makes the inactive layer
invisible. In detail, the inactive layer is disabled and the blendmode reset.
Detection of the current layer state (e.g. active or inactive) is supported
by the getlid method combined with one of the LTDC_LAYER_* flags.
Maybe an additional method "flip" for flip operation should be added to the ltdc
interface? But this make no sence from my view if the layer is a non LTDC layer,
e.g. playing with dma2d only.

Supported and tested nuttx pixel formats:

Single Layer without LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Single Layer with LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Dual Layer with LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Why is FB_FMT_ARGB8888 missing?

Changes:
- Remove unused register debug method.

Todo:
- Add support for backlight, currently not neccessary

Did i forgot something? Take a look in the ltdc example or the interface
description (see nuttx/include/video/ltdc.h).

Thanks to Ken for the base layout. ;)

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:48:53 -06:00
Gregory Nutt
83d87e5ef7 stm32: Add infrastructure for dma2d support
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:41:08 -06:00
Gregory Nutt
060a61dfac stm32: Add common stm32 layer description. This defines a common layer description for the ltdc and dma2d controller.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:37:08 -06:00
Gregory Nutt
df31cf1db8 stm32: configure PLLSAI clock to enable ltdc register access
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:30:58 -06:00
Gregory Nutt
3385fe60cf stm32: Add missing clut register definition
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:28:42 -06:00
Gregory Nutt
e9074c8a44 stm32: rename CFBLR register name to the name used in the reference manual
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:26:04 -06:00
Gregory Nutt
f181dcef29 stm32: rename PLLSAI register name to this one in the reference manual
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:21:39 -06:00
Gregory Nutt
58e4e69656 TM4C129X: Add custom system control header file (incomplete) 2014-12-19 12:12:52 -06:00
Gregory Nutt
da700ddc06 Tiva: Fix configuration logic for IRQ interrupts. The various parts support varying numbers of GPIO blocks and with varying capabilities to support interrupts on the pins of different GPIO blocks 2014-12-18 15:33:52 -06:00
Gregory Nutt
aabd4c59a3 Tiva: Change negative logic CONFIG_TIVA_DISABLE_GPIOx_IRQS to positive logic CONFIG_TIVA_GPIOx_IRQS 2014-12-18 15:19:16 -06:00
Gregory Nutt
83c56151ab Tiva: Add GPIO interrupt support for the TMS4C129X 2014-12-18 11:52:06 -06:00
Gregory Nutt
a719e75851 DK-TM4C129X: Fixes to get clean build. Logic is still not complete, however 2014-12-18 08:24:24 -06:00
Gregory Nutt
05d7520461 TM4C129X: Add pin multiplexing 2014-12-17 11:55:45 -06:00
Gregory Nutt
327a554d0b Tiva TM4C129X: Fix some errors in memory map 2014-12-17 09:42:37 -06:00
Gregory Nutt
14b987dbfa Add memory map for the TM4C129X 2014-12-17 09:40:56 -06:00
Gregory Nutt
aa724ea75b Add interrupt definitions for the TM4C129X 2014-12-17 08:19:23 -06:00
Gregory Nutt
29d23ae626 Remove packaging indications for TM4C129 configuration variables 2014-12-16 16:22:52 -06:00
Gregory Nutt
188e092398 Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system 2014-12-16 16:02:21 -06:00
Gregory Nutt
f284c5cab2 Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
da8b040984 More changes associated with GPIO interrupt for the KL architecture from Alan Carvalho de Assis 2014-12-13 17:30:25 -06:00
Gregory Nutt
810fcd297e Add GPIO interrupt capability for the KL architecture. The patch is almost the same as kinetis_pinirq.c, just minor modifications and rename kl_pinirq to kl_gpioirq to make it more generic to developers. From Alan Carvalho de Assis 2014-12-13 17:27:06 -06:00
Gregory Nutt
a574a3cc8a STM32 LTDC: Fix a typo in conditional compilation 2014-12-13 07:45:42 -06:00
Gregory Nutt
f8592281a7 STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC AHB1 Register. If Both ULPI and the FS clock enable bits are set in FS mode, then the ARM never awakens froom WFI due to a chip issue. From Ken Pettit 2014-12-13 07:44:13 -06:00
Gregory Nutt
c653ff5ce4 Tiva I2C: Don't try to ACK and STOP on the same byte. Improve logic that suppresses STOP on a repeated start 2014-12-12 12:13:31 -06:00
Gregory Nutt
54c8d5c6e4 Tiva I2C: Legacy mode reset logic ommitted in last commit 2014-12-12 09:31:17 -06:00
Gregory Nutt
19ef820925 Tiva I2C: Add logic to reset I2C when busy hangs with busy 2014-12-12 09:26:10 -06:00
Gregory Nutt
dd3d417aed STM32 OTGHS Device: Fix for OTGHS core working in FS mode. From Ken Pettit 2014-12-12 07:43:32 -06:00
Gregory Nutt
310983bee6 Cosmetic change to force compliance with coding standard 2014-12-12 07:14:16 -06:00
Gregory Nutt
1311e76adc Tiva I2C: Fix how I2C transactions are started and some I2C error reporting 2014-12-11 12:31:42 -06:00
Gregory Nutt
04d8169f0f Tiva I2C: All SDA pins should be open drain, but all SCL pins should be digital output 2014-12-11 12:30:48 -06:00
Gregory Nutt
218967b80e Tiva I2C: Add register-level debug capability 2014-12-11 09:34:03 -06:00
Gregory Nutt
6a98255aa0 Tiva I2C: Minor clean-up to I2C tracing 2014-12-11 08:11:32 -06:00
Gregory Nutt
2e8ad53ed4 Tiva I2C: Fix error in assertion logic 2014-12-11 07:02:14 -06:00
Gregory Nutt
af31b219a3 Tiva I2C: Add I2C options to Kconfig 2014-12-10 13:56:00 -06:00
Gregory Nutt
37eb362b08 Tiva I2C: Add workaround for errata; clean up some error handling 2014-12-10 13:01:47 -06:00
Gregory Nutt
38bd919930 Tiva I2C: Driver is code complete but untested 2014-12-10 12:43:46 -06:00
Gregory Nutt
bdd5289100 Tiva i2C: Lots of compilation fixes 2014-12-10 08:47:34 -06:00
Gregory Nutt
0951d80d45 Simplify I2C master/slave addresing to simplify driver development 2014-12-10 08:47:07 -06:00
Gregory Nutt
3313cee55c Tiva I2C: Finishes initialization logic 2014-12-10 07:31:44 -06:00
Gregory Nutt
7373e66213 Tiva: Do I2C clock initialization without using legacy registers. Necessary for I2C3-5 2014-12-09 15:28:10 -06:00
Gregory Nutt
90c98f8526 Add a little bit more Tiva I2C initialization logic 2014-12-09 14:48:24 -06:00
Gregory Nutt
f851a1328e Fix typo in Tiva UART regiser address definition. SourceForge Ticket #37 2014-12-09 12:18:41 -06:00
Gregory Nutt
286a142a08 Tiva: Add build framework and skeleton files for Tiva I2C driver. Initial commit is just the STM32 I2C driver with name changes and STM32-specific logic removed 2014-12-09 12:18:40 -06:00
Gregory Nutt
1d43784c48 Update the Tiva I2C register definitions for the TM4C123 and TM4C129 2014-12-09 08:42:12 -06:00
Gregory Nutt
cb9e3c2bb9 Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin configurations. This is based on an F411 SPI1 errata but the fixed is generalized to all SPI and all F2 and F4 (let me know if this introduces any other issues). Discovered and fixed by Sebastien Lorquet after much consternation. 2014-12-08 09:51:52 -06:00
Gregory Nutt
e333132280 SAMA5D3 Xplained: Add support for the Itead Joystick shield 2014-12-03 12:24:23 -06:00
Gregory Nutt
6d7106424e STM32: Add MCO configuration for the STM32L1xx. From Jussi Kivilinna 2014-12-02 10:19:37 -06:00
Gregory Nutt
13de352dcd STM32L15: Fix typo in MCO pin definition. From Jussi Kivilinna 2014-12-02 10:18:02 -06:00
Gregory Nutt
f94052de26 Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
eace825e3b STM32 F4 I2C: Port Tridge's I2C noise resiliance logic from the PX4 repository. 2014-11-29 13:37:45 -06:00
Gregory Nutt
0d50608eae Fix one warning. There are a couple of others that look like real problems 2014-11-28 11:49:24 -06:00
Gregory Nutt
70f778c02b EFM32 Serial: Add support for termios TCGET and TCSET. For the moment, only set/get speed is implemetned. From Pierre-noel Bouteville 2014-11-27 19:14:10 -06:00
Gregory Nutt
3d55cd82ee Forgot too add file before last commit 2014-11-27 06:14:09 -06:00
Gregory Nutt
0ad88d9664 Enable support for STM32F102. https://github.com/PX4/NuttX/pull/28.diff 2014-11-27 06:12:35 -06:00
Gregory Nutt
4f22093bfa Initial support for the LPC4357-EVB provided by Toby Duckworth 2014-11-26 15:18:24 -06:00
Gregory Nutt
2c1f018e85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
727a7c9e40 Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
Gregory Nutt
697b0f8f19 More bugs/warnings found by cppcheck 2014-11-24 13:24:51 -06:00
Gregory Nutt
8becf3c18c Various issues/bugs detected by cppcheck 2014-11-24 12:59:52 -06:00
Gregory Nutt
7dfb945979 I2C header file for the Freescale KL family. From Alan Carvalho de Assis. 2014-11-23 16:49:00 -06:00
Gregory Nutt
f548a10c6b SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
184ebdf191 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
7ab214d811 SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
7dd183fa50 SAMA5D4-EK EMAC1: Correct name of EMAC1 configuration variable 2014-11-18 11:02:22 -06:00
Gregory Nutt
62e94bc883 Cosmetic fixes to comments 2014-11-18 07:19:10 -06:00
Gregory Nutt
f4736a2042 Update ChangeLog 2014-11-17 12:48:01 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
da160bfee9 EFM32 USART setup: Computation of BAUD includes shift; Eliminate additional shift. From Pierre-noel Bouteville 2014-11-16 07:57:57 -06:00
Gregory Nutt
83e5ee1c04 SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
Gregory Nutt
f4e947ee80 Remove use of NET_LL_HDRLEN from Ethernet drivers. Use ETH_HDRLEN instead 2014-11-15 09:05:34 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
025e36ba8c Cosmetic updates; updates to README 2014-11-14 09:54:00 -06:00
Gregory Nutt
a451f3b99e EFM32: Finishes USB naming fixup. Still some missing initialization logic 2014-11-14 08:36:18 -06:00
Gregory Nutt
3a4e126f2d EFM32: More USB naming updates. Still not finished 2014-11-14 07:20:13 -06:00
Gregory Nutt
d667b9072a EFM32: More USB register name corrections. Still incomplete 2014-11-13 12:25:42 -06:00
Gregory Nutt
299b4db5de EFM32: Finishes USB naming changes for device 2014-11-13 10:45:47 -06:00
Gregory Nutt
e69e2767ad Correct a typo in the STM32 OTGFS register bit definitions 2014-11-13 10:43:54 -06:00
Gregory Nutt
312cb6ffa0 EFM32: Tweaks to get EFM32GG-STK3700 running NSH over LEUART0 2014-11-12 12:50:09 -06:00
Gregory Nutt
e424ddbabd EFM32: More USB register name corrections. Still incomplete 2014-11-12 10:43:29 -06:00
Gregory Nutt
365afd95a6 EFM32: More USB register name corrections. Still incomplete 2014-11-12 09:46:58 -06:00
Gregory Nutt
123baad163 Add protection from C++ name mangling in the ARM up_internal.h. From Lorenz Meier. 2014-11-12 07:27:28 -06:00
Gregory Nutt
dc16ffe11a Fix a typo in an I2C header file. From Jahu Niskanen 2014-11-11 07:12:16 -06:00
Gregory Nutt
c65372b80c Support for the STM32F103RG. From Murilo Ponte 2014-11-10 07:48:46 -06:00
Gregory Nutt
089124ef8a EFM32: Reduce writes to the CTRL register 2014-11-09 09:43:43 -06:00
Gregory Nutt
6ea107784d EFM32: Fix issues associated with SPI bi order. From Pierre 2014-11-09 08:21:38 -06:00
Gregory Nutt
b96654347b EFM32: Fix typo in connecting ODD GPIO interrupt. Noted by Pierre 2014-11-08 06:18:21 -06:00
Gregory Nutt
ceffd2f121 EFM32 USB: More naming fixes... still does not compile 2014-11-05 14:22:12 -06:00
Gregory Nutt
a2a2af526f EFM32 USB: A few more naming conversions... still a long way to go 2014-11-04 11:48:41 -06:00
Gregory Nutt
d8bfd5a4d2 EFM32: Port USB device and host drivers from STM32. Still does not compile 2014-11-04 10:14:04 -06:00
Gregory Nutt
88dc7b3b3c EFM32: Add USB build support 2014-11-04 06:47:14 -06:00
Gregory Nutt
9051ffd638 STM32GG Starter Kit: Add basic NSH configuration 2014-11-03 16:58:22 -06:00
Gregory Nutt
493ba46ec6 Fix typo is SAM4E pinmap file 2014-11-03 11:59:53 -06:00
Gregory Nutt
811d557053 EFM32 ROM table header files 2014-11-01 13:27:36 -06:00
Gregory Nutt
3189a1acc7 EFM32: Add LESENSE header file 2014-11-01 12:56:55 -06:00
Gregory Nutt
458992ca5b EFM32: Add USB header file 2014-11-01 11:57:11 -06:00
Gregory Nutt
0f754bd6d7 Add optional timestamp to syslog output. From pn_bouteville@yahoo.fr 2014-11-01 09:17:34 -06:00
Gregory Nutt
3d2a34045b Remove carriage returns 2014-11-01 08:06:50 -06:00
Gregory Nutt
918a74805c ARMv7-M: ETM header file 2014-11-01 08:06:06 -06:00
Gregory Nutt
442c646955 EFTM32 ITM: Add missing ~ in bit clear operation. From pn_bouteville@yahoo.fr 2014-11-01 06:51:14 -06:00
Gregory Nutt
0f59ab369a EFM32: Add LCD header file 2014-10-31 20:25:37 -06:00
Gregory Nutt
a36bb77e05 EFM32: Add DAC header file 2014-10-31 20:05:47 -06:00
Gregory Nutt
7f3bd970d7 EFM32: Add BURTC header file 2014-10-31 13:05:00 -06:00
Gregory Nutt
61300aa12e EFM32: Add PRS signals 2014-10-31 12:30:01 -06:00
Gregory Nutt
a9fb2f78b5 EFM32: Add ADC heder file 2014-10-31 12:22:45 -06:00
Gregory Nutt
54af514ef6 EFM32: Add I2C header file 2014-10-31 12:07:57 -06:00
Gregory Nutt
ecd84c7844 EFM32: Add PRS header file 2014-10-31 11:47:40 -06:00
Gregory Nutt
4660eb6e1f EFM32: Add PCNT header file 2014-10-31 11:34:00 -06:00
Gregory Nutt
acf5cbb3dc EFM32: Add RMU header file 2014-10-31 11:17:12 -06:00
Gregory Nutt
afdf44e3c6 EFM32: Add EMU header file 2014-10-31 10:56:15 -06:00
Gregory Nutt
16c1eb924a EFM32: Add VCMP header file 2014-10-31 10:41:28 -06:00
Gregory Nutt
f4fd24acb7 EFM32: Add RTC header file 2014-10-31 10:27:52 -06:00
Gregory Nutt
b984a7c9c0 EFM32: Add AES header file 2014-10-31 10:17:48 -06:00
Gregory Nutt
f081a9ccf5 EFM32: Add watchdog header file 2014-10-31 10:02:37 -06:00
Gregory Nutt
7e661442ed EFM32: Add LETIMER header file 2014-10-31 09:54:26 -06:00
Gregory Nutt
c25f0062ce EFM32: Add ACMP header file 2014-10-31 09:38:21 -06:00
Gregory Nutt
16c9292c3e EFM32: Add timer header file 2014-10-31 09:27:15 -06:00
Gregory Nutt
6313e5dcb3 EFM32: Changes picked up from Pierre's repository 2014-10-30 18:01:46 -06:00
Gregory Nutt
0eaa74962c Costmetic changes -- spacing, comments. 2014-10-30 16:33:40 -06:00
Gregory Nutt
05c1d9707d SAM3/4: Fix error serial TERMIOS ioctl handling 2014-10-30 12:23:15 -06:00
Gregory Nutt
11ab9c908e Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required 2014-10-29 15:47:15 -06:00
Gregory Nutt
692f63e3ee EFM32: In order to use LEUART, LE clocking must be enabled 2014-10-29 11:20:54 -06:00
Gregory Nutt
4ec43d1002 EFM32: Various fixes for LEUART build 2014-10-29 09:37:39 -06:00
Gregory Nutt
2ea73f760c EFM32: Minor serial interrupt mask change; Add LEUART0 board support 2014-10-29 08:04:29 -06:00
Gregory Nutt
7e697f2369 EFM32: Implement HFPERCLK logic 2014-10-28 19:46:45 -06:00
Gregory Nutt
b13b80e35f Fix a few more EFM32 integration bugs 2014-10-28 19:02:21 -06:00
Gregory Nutt
4098d8c4a2 SAM4: Fix a usbnsh build problem that has crept into all serial drivers 2014-10-28 15:44:47 -06:00
Gregory Nutt
7edef0f970 EFM32: Need to configure UART GPIOs as outputs 2014-10-28 14:50:15 -06:00
Gregory Nutt
28ac9e5841 Oops... fix an error in an assertion of last commit 2014-10-28 12:42:19 -06:00
Gregory Nutt
77a622da0b EFM32: Add missing shift of register value 2014-10-28 12:36:47 -06:00
Gregory Nutt
5ab16ee550 EFM32: Fix GPIO configuration logic; Add missing board initializatin logic; Fix LED naming 2014-10-28 10:39:57 -06:00
Gregory Nutt
1e6524cac8 EFM32G: Fix typo in memory map header file 2014-10-28 09:26:06 -06:00
Gregory Nutt
103e5dc791 SAM4E: Fix error TC header file 2014-10-28 09:22:37 -06:00
Gregory Nutt
3805a31473 EFM32: Correct a typo in LFXO bit in clock configuration 2014-10-28 08:59:27 -06:00
Gregory Nutt
027b7c5983 EFM32: Update a configuration; Compile fix for when DEBUG is enabled 2014-10-28 07:24:04 -06:00
Gregory Nutt
5ebc472f43 STM32 Serial: Don't compile up_earlyserialinit() if USE_EARLYSERIALINIT is not define. Otherwise, a macro definition clobbers the function definition 2014-10-28 06:58:37 -06:00
Gregory Nutt
60d2547cd7 Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
1252286845 Cosmetic... removed checks for non-existent configuration setting 2014-10-27 09:05:52 -06:00
Gregory Nutt
fe6f857f13 Cosmetic changes 2014-10-27 07:57:12 -06:00
Gregory Nutt
818f4c8675 EFM32 SPI: setfrequency() needs to return actual frequency; simplify nbits usages by removing conditional logic 2014-10-27 07:07:30 -06:00
Gregory Nutt
a6f70a00a9 EFM32 SPI: Add check to make sure that the SPI RX buffer is empty before starting a transfer 2014-10-26 13:13:53 -06:00
Gregory Nutt
82bf0558e1 EFM32 SPI: Change some logic that I fear could cause RX data overrun 2014-10-26 12:53:26 -06:00
Gregory Nutt
0100d0f6c0 EFM32: Cosmetic changes to comments and format 2014-10-26 12:48:47 -06:00
Gregory Nutt
5c03174fe4 Cosmetic update to spacing and comments 2014-10-26 11:25:47 -06:00
Gregory Nutt
30946beaf0 EFM32: Integrate SPI DMA capability 2014-10-26 11:22:16 -06:00
Gregory Nutt
cd004832d1 EFM32: Integrate Pierre's SPI driver 2014-10-26 09:27:55 -06:00
Gregory Nutt
2c85b0e85f Remove unnecessary header file inclusion 2014-10-26 06:09:20 -06:00
Gregory Nutt
0f9139f2e9 EFM32: dma_config_t needs to be only 16-bits for now 2014-10-25 17:53:29 -06:00
Gregory Nutt
8dbef3ea4c EFM32 DMA: Cosmetic changes to debug instrumentatin and comments 2014-10-25 17:43:56 -06:00
Gregory Nutt
4b4fc79257 EFM32: Fix misconception in DMA control descriptor alignment 2014-10-25 17:21:58 -06:00
Gregory Nutt
556751bb7a EFM32: More fixes to DMA descriptor table logic 2014-10-25 17:15:16 -06:00
Gregory Nutt
042963cb54 Add debug assertion 2014-10-25 15:29:23 -06:00
Gregory Nutt
04d732dbab EFM32: Correct handling of DMA descriptors; Add initialization of DMA CTRLBASE 2014-10-25 14:55:02 -06:00
Gregory Nutt
ca202adadb EFM32: Completes very basic DMA support. Needs review. Untested 2014-10-25 11:31:13 -06:00
Gregory Nutt
8c875f992f Dangle whitespace removal 2014-10-25 10:35:29 -06:00
Gregory Nutt
2bc74db84b EFM32: A little more DMA logic. Still incomplete 2014-10-25 10:34:07 -06:00
Gregory Nutt
7a845e82de Add some logic to EFM32 DMA module. Still incomplete 2014-10-25 08:09:19 -06:00
Gregory Nutt
800826ac64 Add framework for EFM32 DMA support -- no logic in place yet 2014-10-24 17:59:13 -06:00
Gregory Nutt
002fa55c04 Fix some typos that I just introduced... Sometimes I can't do anything right 2014-10-24 17:58:33 -06:00
Gregory Nutt
4d393f3801 Update EFM32 DMA header file for Gecko support 2014-10-24 16:58:38 -06:00
Gregory Nutt
1a532c1744 SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
Gregory Nutt
2e829a5ff8 Another fix to SAM3/4 GPIO IRQ issue 2014-10-24 10:55:52 -06:00
Gregory Nutt
96405b1913 SAM3/4: Fix conditional compilation in GPIO IRQ logic 2014-10-24 10:44:43 -06:00
Gregory Nutt
8dfb3a1dd0 SAM4E: Fix options to select GPIO interrupts in Kconfig 2014-10-24 09:29:01 -06:00
Gregory Nutt
d87cc50b31 Add EFM32 DMA header file 2014-10-24 07:57:16 -06:00
Gregory Nutt
e242f945ba Another typo in EMF32 GPIO logic 2014-10-23 19:19:58 -06:00
Gregory Nutt
687a28cc09 Fix compiler errors in up_itm_syslog.c. From Pierre-Noel Bouteville 2014-10-23 18:30:32 -06:00
Gregory Nutt
d342fbfb0c Fix file naming: arm_item_syslog.c changed to up_itm_syslog.c. From Pierre-Noel Bouteville 2014-10-23 18:25:05 -06:00
Gregory Nutt
afeb7a46e2 EFM32 port and pin decoding backward in every case. From Pierre-Noel Bouteville 2014-10-23 18:16:57 -06:00
Gregory Nutt
cfd344c1a6 Oops last changes still in editor 2014-10-23 10:13:32 -06:00
Gregory Nutt
eaa0b18c18 EFM32: Add configuration option to use USARTs as SPI 2014-10-23 08:54:26 -06:00
Gregory Nutt
113483a177 EFM32: Add configuration option to use USARTs as SPI 2014-10-23 08:25:37 -06:00
Gregory Nutt
cc0a5d6004 Update to the LPC43xx RIT/Tickless code. From Brandon Warhurst 2014-10-23 07:14:37 -06:00
Gregory Nutt
c10f826ae3 Add support for tickless operation using the NXP LPC43xx 2014-10-23 06:54:24 -06:00
Gregory Nutt
df2abd3efc EFM32: Add logic to initialize and use ITM system 2014-10-22 09:05:22 -06:00
Gregory Nutt
9878205b1c Remove whitespace and and carriage returns 2014-10-22 09:04:40 -06:00
Gregory Nutt
d36bb47210 ARMv7: Add support to use ITM for SYSLOG debug output 2014-10-22 09:03:00 -06:00
Gregory Nutt
98c904d694 Eliminate a warning 2014-10-22 07:56:48 -06:00
Gregory Nutt
2763da5ddd EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
f06890c931 Add ARMv7-M DWT and TPI register definitions 2014-10-21 16:46:26 -06:00
Gregory Nutt
c447bb7537 Add CMSIS ITM header file and library 2014-10-21 16:16:00 -06:00
Gregory Nutt
b965c7e8f4 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
e7fe3882a6 EFM32: Add LFA and LFB clock support 2014-10-21 10:45:33 -06:00
Gregory Nutt
6cf07c2a0e EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
1640ee9108 EFM32: Add a LEUART-based serial driver (untestee) 2014-10-21 09:21:03 -06:00
Gregory Nutt
58f6b696f6 EFM32: Add basic, low-level support for the low energy UARTs 2014-10-21 08:48:38 -06:00
Gregory Nutt
994dbda075 EFM32: Addred LEUART register definition header file 2014-10-21 08:11:03 -06:00
Gregory Nutt
94270a0229 Add ADC pinmap definitions for the STM32 F103R from Lederhilger Martin 2014-10-21 06:48:16 -06:00
Gregory Nutt
23db8a44c3 Fixe to allow compile of lpc43_gpioint.c. It likely doesn't work. From Brandon warhurst_002 2014-10-21 06:36:27 -06:00
Gregory Nutt
d2cf8395f9 stm32: rename spi frame format definition
This renames the stm32 spi frame format definition to the short description
name as well as the other cr2 register flags.

Note! STM32_SPI3_FRF was never used by nuttx somewhere

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-10-20 15:12:59 -06:00
Gregory Nutt
ebf9bce9d8 EFM32: Another update to USART oversampling calculation. Clip to positive; update comments 2014-10-20 13:54:43 -06:00
Gregory Nutt
1a77fbcaca Fix some naming 2014-10-20 12:29:28 -06:00
Gregory Nutt
260238aa8a EFM32 USART: Fix oversampling selection; Should be biased toward higher oversampling rates 2014-10-20 10:54:13 -06:00
Gregory Nutt
75b728498a Finsh USART configuration logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
956fc38fca Add GPIO interrupt logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
33a12dfb84 Trivial, cosmetic typos in comments 2014-10-20 08:12:07 -06:00
Gregory Nutt
1524c67a17 Add EFM32 serial driver 2014-10-19 18:55:44 -06:00
Gregory Nutt
74db6df61f Add some UART configuration logic (still incomplete) 2014-10-19 16:42:15 -06:00
Gregory Nutt
df85772cea Fleshes out GPIO configuration logic 2014-10-19 13:47:52 -06:00
Gregory Nutt
2a7edd7e1c Add GPIO header file + a little bit of GPIO configuration logig 2014-10-19 13:07:52 -06:00
Gregory Nutt
3896f187a6 Basic clock configuration logic 2014-10-19 11:08:56 -06:00
Gregory Nutt
06ac7e3a6f Add MSC header file 2014-10-19 09:59:40 -06:00
Gregory Nutt
f0b13590ac Fix conditional logic in CMU header file 2014-10-19 06:46:35 -06:00
Gregory Nutt
8155730f28 Add frame for EFM32 GPIO logic (empty functions) 2014-10-18 18:40:08 -06:00
Gregory Nutt
ebc8333a0b Fix some incorrect conditional logic 2014-10-18 16:16:57 -06:00
Gregory Nutt
a011c250da Add skeleton lowputc() file for EFM32 2014-10-18 16:16:48 -06:00
Gregory Nutt
4f0b8da33c Add skeleton lowputc() file for EFM32 2014-10-18 16:16:22 -06:00
Gregory Nutt
6b1e87a848 Add EFM32 configuration header file 2014-10-18 16:15:53 -06:00
Gregory Nutt
ae3e75a5aa efm32_vectors.S is not really a HEAD object 2014-10-18 15:32:56 -06:00
Gregory Nutt
9069fc797a Add EFM32 SysTick timer support 2014-10-18 15:27:36 -06:00
Gregory Nutt
de5c451a30 Add empty file for event EFM32 clock configuration logic 2014-10-18 15:22:11 -06:00
Gregory Nutt
1bfec65ac5 More framework for GPIO interrupt support 2014-10-18 14:05:07 -06:00
Gregory Nutt
8d73e56145 Use UART0 for the serial console 2014-10-18 12:47:45 -06:00
Gregory Nutt
21d906db0b Add EFM32 UART/USART header file 2014-10-18 11:13:03 -06:00
Gregory Nutt
c071687ae5 Oops committed the wrong version 2014-10-18 09:46:35 -06:00
Gregory Nutt
6d5c75c2ff Add EFM32 CMU header file 2014-10-18 09:26:56 -06:00
Gregory Nutt
686a29624c Add EFM32 Memory Maps 2014-10-17 16:43:52 -06:00
Gregory Nutt
17399091ed Add GPIO header file and EFM32 Gecko Starter Kit LED support 2014-10-17 14:17:44 -06:00
Gregory Nutt
8eb85ce1f8 More EFM32 files 2014-10-17 12:31:44 -06:00
Gregory Nutt
a45de60aca More EFM32 files and logic 2014-10-17 12:02:32 -06:00
Gregory Nutt
895cfe0e7c Add configuration support for the EFM32 Gecko Starter Kit 2014-10-17 09:25:52 -06:00
Gregory Nutt
0aea891272 Enable selection of SPI2 for STM32L15XX in Kconfig. From Jussi Kivilinna 2014-10-16 07:03:23 -06:00
Gregory Nutt
26b42e3f57 Minor update to last Kconfig change 2014-10-15 12:33:37 -06:00
Gregory Nutt
e73b64f5ea Add Kconfig selections for STM32-F4x1RE SPI peripheral 2014-10-15 12:22:04 -06:00
Gregory Nutt
a835387529 Fix file mode on modified files 2014-10-14 15:45:56 -06:00
Gregory Nutt
56841b9e20 Support for the STM32 F411RE from Serg Podtynnyi 2014-10-14 15:42:28 -06:00
Gregory Nutt
7012d13e95 Cosmetic changes to comments 2014-10-10 16:54:47 -06:00
Gregory Nutt
85c75a39b0 Fix a few typos 2014-10-10 11:41:40 -06:00
Gregory Nutt
abc90f0e50 Fix watchdog stop bit usage. From Lazlo 2014-10-10 11:36:50 -06:00
Gregory Nutt
385ac926b6 Fix a typo in the lpc43 makefile, lpc43_usb0dev not lpc31_usb0dev 2014-10-09 17:59:42 -06:00
Gregory Nutt
1b1daeb7ef Correct STM32 RTC EXTI bit definition. From Lazlo 2014-10-09 06:25:07 -06:00
Gregory Nutt
f6004ff6eb Misc changes to get a clean build after all of the syslog changes. There are probably other things still broken 2014-10-08 16:23:48 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
076a9ffadd Simplification of conditional compilation suggested by pn_bouteville 2014-10-07 15:44:54 -06:00
Gregory Nutt
6ab29cbef9 Remove non-functional vestiges of OTGHS in FS mode (including OTGFS2); try to convert the stm32f429i-disco configuration to use OTGHS instead of OTFHS in FS mode (OTGFS2). But I don't have the boards and can't test 2014-10-07 15:25:31 -06:00
Gregory Nutt
6023219078 Integrates OTGHS support into the STM32; Eliminates the older OTGHS in FS mode logic. From Brennan Ashton 2014-10-07 15:05:30 -06:00
Gregory Nutt
362736b377 Add files that implement true high speed support for the STM32 OTGHS peripheral. From Brennan Ashton 2014-10-07 15:01:42 -06:00
Gregory Nutt
3bb8926f00 Fix some recently introduced typos, build problems, and warnings 2014-10-05 16:58:52 -06:00
Gregory Nutt
48f29ce348 More vfork(): If we get to vfork() via system call, then we need to clone some system call information so that the return form the cloned system call works correctly 2014-09-29 10:59:15 -06:00
Gregory Nutt
2b0c657b1f Fix vfork(). Now that arguments are kept on the stack, the way that arguments are passed from parent to child in vfork() must change. This bug has always been present, but was not visible with the old strdup() way of passing arguments 2014-09-29 10:45:44 -06:00
Gregory Nutt
083e808ad8 This completes the implementation of shared memory support 2014-09-24 09:27:17 -06:00
Gregory Nutt
7e9c8b5926 STM32 CAN correction suggested by Max Holtzberg 2014-09-24 08:23:05 -06:00
Gregory Nutt
327628ca19 Build support for platform-specific shared memory logic. Not logic yet in place 2014-09-24 07:39:06 -06:00
Gregory Nutt
74bb07eeb4 Build support for platform-specific shared memory logic. Not logic yet in place 2014-09-24 07:38:11 -06:00
Gregory Nutt
238e18cc0a Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
25b52a111e Cosmetic 2014-09-23 16:03:52 -06:00
Gregory Nutt
a9864bc100 Extend virtual/physical address conversions to include addresses in shared memory. 2014-09-23 16:03:08 -06:00
Gregory Nutt
cce614c67e Fix some inconsistent field name in struct task_group_s: addrenv should be tg_addrenv. 2014-09-23 16:01:44 -06:00
Gregory Nutt
df26163f1f Add logic necessary to handler remapping of shared memory on contex switches 2014-09-23 13:19:30 -06:00
Gregory Nutt
bc01f422df More NxWM build fixes 2014-09-20 16:47:00 -06:00
Gregory Nutt
1ca6adadfa More naming changes to get the stm3240g-eval/nxterm configuration building again 2014-09-20 15:53:28 -06:00
Gregory Nutt
2eef637ca2 SAMA5D4-EK/nsh: WM8904 support enabled; README updated 2014-09-18 14:29:20 -06:00
Gregory Nutt
e94adf8ff4 Ooops... a file that I forgot to add yesterday 2014-09-17 09:52:07 -06:00
Gregory Nutt
52a1f19023 Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
e409b64bdc Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte 2014-09-17 07:42:12 -06:00
Gregory Nutt
04f75c42cc Add a sharable version of arm_virtpgaddr() 2014-09-16 16:49:44 -06:00
Gregory Nutt
d936f1a918 First round of changes to get the ELF configuration building again 2014-09-16 15:37:05 -06:00
Gregory Nutt
c20907b86c These files were deleted and moved to a different location (see previos commit) 2014-09-16 13:36:51 -06:00
Gregory Nutt
8058de7874 remove tailing blank line 2014-09-16 13:36:14 -06:00
Gregory Nutt
bd6f7c50e8 Move common/up_signal_dispatch.c to armv6-m, armv7-m, and armv7-a. The armv7-a version needs to be different to handle the case where we are dispatch kernel mode signals when running under a user mode group 2014-09-16 13:35:29 -06:00
Gregory Nutt
8c3fd5a162 Correct stack handling is signal deliver to user processes 2014-09-16 13:33:13 -06:00
Gregory Nutt
ebc10e0237 Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:31:48 -06:00
Gregory Nutt
4a04ea48e4 Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:31:24 -06:00
Gregory Nutt
9879f47bbb Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:29:43 -06:00
Gregory Nutt
4f1ca4cbb7 Partial fix to an cache cleaning problem 2014-09-15 16:04:42 -06:00
Gregory Nutt
35a282bc30 Fix an error in a debug statement 2014-09-15 15:15:57 -06:00
Gregory Nutt
e2952e4088 Eliminate a bug introduced in last checking 2014-09-15 15:10:50 -06:00
Gregory Nutt
d14d3b29bb ARMv7-A: Improvements to assertion output for kernel mode 2014-09-15 15:03:55 -06:00
Gregory Nutt
9aae0adffa If we are configured to use a kernel stack while in SYSCALL handling, then we need to switch back to the user stack to deliver a signal 2014-09-15 11:38:48 -06:00
Gregory Nutt
949cc1b20c Fix a typo in system call when fetching parameter from the stack: regs[REG_PC]+4 is the address, not regs[REG_PC+4] 2014-09-15 10:55:10 -06:00
Gregory Nutt
946b916f69 Initial integration of kernel stack (does not work) 2014-09-14 11:19:34 -06:00
Gregory Nutt
16ddffc941 Add the initial implementation of the process kernel stack logic. Not yet integrated into the main OS logic nor tested. 2014-09-14 09:53:54 -06:00
Gregory Nutt
ffff51c1b1 Rename everything associated with the dynamic process stack to ustack to make room in the name space for a kstack 2014-09-14 09:10:09 -06:00
Gregory Nutt
d956936535 Add logic need to manage a virtualized stack. Not yet incorporated into base OS logic. 2014-09-13 13:45:35 -06:00
Gregory Nutt
5d4f336b1f Move static helper routines from arm_addrenv.c and may them global so that they can be shared both forthcoming stack address environment logic. 2014-09-13 13:17:44 -06:00
Gregory Nutt
f4bcb27962 Add a configuration option for dynamic stack management 2014-09-13 12:25:32 -06:00
Gregory Nutt
fe48417a96 Comsetic updates to comments, debug output 2014-09-12 10:31:58 -06:00
Gregory Nutt
fba35f0c41 ARMv7-A: Modify up_fullcontextrestore() for CONFIG_BUILD_KERNEL. It changed CPSR while in kernel. That will crash is the new CPSR is user mode while executing in kernel space. Fixed by adding a SYS_context_restore system call. There is an alternative, simpler modification to up_fullcontextrestore() that could have been done: It might have been possible to use the SPSR instead of the CPRSR and then do an exception return from up_fullcontextrestore(). That would be more efficient, but I never tried it. 2014-09-12 08:04:27 -06:00
Gregory Nutt
6084fad7e0 Fix logic for returning from exceptions to user-mode contexts 2014-09-11 18:43:30 -06:00
Gregory Nutt
62e608be8c All tasks, even user mode tasks, must start in supervisor mode until they get past the start-up trampoline 2014-09-11 18:42:52 -06:00
Gregory Nutt
4821587509 Update some comments/function headers 2014-09-11 17:15:26 -06:00
Gregory Nutt
401b8543cd Tighten up some ARM assembly language. You can always do better 2014-09-11 15:12:08 -06:00
Gregory Nutt
bd7f16d16a ARMv7-A: Exception register save/restore needs to work a little differently if we support user mode processes 2014-09-11 14:34:10 -06:00
Gregory Nutt
998c5ee0a9 Trivial kernel build related fixes for consistency 2014-09-11 12:35:23 -06:00
Gregory Nutt
1f23ad9bad Misc fixes to repair some of the breakage to the SAMA5D4-EK elf configuration caused by changes for the knsh configuration 2014-09-11 10:31:12 -06:00
Gregory Nutt
442d2adb7a Fix for UART7 and UART8 on STM32 clock enable from Aton 2014-09-11 10:27:40 -06:00
Gregory Nutt
006cf7d745 Add logic to initialize the per-process user heap when each user process is started 2014-09-10 15:55:36 -06:00
Gregory Nutt
2da0392ae2 SAMA5D4-EK: These configurations now use the fixed DRAM mapping for manipulating the page memory pool. 2014-09-10 08:44:09 -06:00
Gregory Nutt
6238e87aaa Add configuration to use the fixed DRAM mapping for the page pool (if available) instead of remapping dynamically to access L2 page tables and page data. Also, add logic in address environment creation to initialize the shared data at the beginning of the .bss/.data process memory region. 2014-09-10 08:41:01 -06:00
Gregory Nutt
8a99c421ff pcDuino: Several fixes so that it still builds after other Cortex-A changes. 2014-09-10 06:24:39 -06:00
Gregory Nutt
aaf190dcf6 ELF relocations. Some relocation types do not have a named symbol associated with them. The design did not account for that case 2014-09-09 16:52:51 -06:00
Gregory Nutt
068115e7d6 SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
Gregory Nutt
8b64dc003e SAMA5D4-EK: In kernel build with address environment, need logic to map user virtual addresses to physical addresses, and vice versa 2014-09-07 19:25:30 -06:00
Gregory Nutt
53bd807186 Fix loop counter... was overrunning a table on larger ELF files 2014-09-07 14:42:04 -06:00
Gregory Nutt
dcc711f3f2 Correct size comparison (pages vs. sections) 2014-09-07 13:47:01 -06:00
Gregory Nutt
3dd3b1f5e2 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
70e5350942 Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
15e439d6de I love/hate conditional compilation 2014-09-03 11:43:23 -06:00
Gregory Nutt
12775801c9 Add support for delivery of use-mode signals in the kernel build. 2014-09-02 15:58:14 -06:00
Gregory Nutt
aa7efbb52e Restructuring of build to allow use of use-space allocators by kernel logic in the kernel build. 2014-09-02 11:22:09 -06:00
Gregory Nutt
8557f1a1bb Space at the beginning of the process data space is now reserved for user heap management structures. In the kernel build mode, these heap structures are shared between the kernel and use code in order to allocate user-specific data. 2014-09-02 11:21:23 -06:00
Gregory Nutt
4d8367a009 sbrk() need to initialized the memory manager on the first call 2014-09-02 08:05:11 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
587520a7d2 Completes the implementation of sbrk() (untested) 2014-09-01 10:46:51 -06:00
Gregory Nutt
4537a905f6 ARMv7 address environment: Static functions not marked static 2014-09-01 08:49:08 -06:00
Gregory Nutt
2fd3413d35 Fix common heap allocation logic, taking into account the kernel build requirements 2014-09-01 07:57:54 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
1643c35609 Rename kufree to kumm_free for consistency with other naming 2014-08-31 16:15:11 -06:00
Gregory Nutt
31608cd434 Rename kmemalign to kmm_memalign for consitency with other naming 2014-08-31 14:57:31 -06:00
Gregory Nutt
4c01f5c1b7 Clean up some kernel build heap allocation issues. The Cortex-A kernel build now compiles without errors (but cannot link until brk() and sbrk() are implemented). 2014-08-31 12:50:05 -06:00
Gregory Nutt
10aa9ad087 Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported 2014-08-31 10:54:55 -06:00
Gregory Nutt
05b6217876 ARMv7-A: A little more logic and a few more fixes for Cortex-A kernel build 2014-08-31 07:15:46 -06:00
Gregory Nutt
729bc9f9a7 Various changes/fixes to get configs/stm32f4discovery/kostest working after the big configuration renaming (and after a long period of bit rot) 2014-08-29 16:23:46 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
67721c50f1 Fix hard coded values in dispatch_sysall inline assembly. Back out/corect part of last change; that was going the wrong direction. 2014-08-29 10:10:47 -06:00
Gregory Nutt
48c2c9ed08 Fix a cloned typo 2014-08-29 10:09:07 -06:00
Gregory Nutt
27e463dfaa Various fixes to the ARMv7-A system call logic 2014-08-29 08:24:00 -06:00
Gregory Nutt
8196b629a4 Rename arch/arm/src/armv7-a/syscall.h to svcall.h to work around some include path name collisions; fix some compilation errors in SYSCALL logic when debug is enabled 2014-08-29 07:48:16 -06:00
Gregory Nutt
8dd679e875 ARMv7-A: Add SYSCALL handling logic 2014-08-28 14:52:14 -06:00
Gregory Nutt
cbf0141d6c Add an ARMv7-A system call definition header file 2014-08-28 13:21:36 -06:00
Gregory Nutt
3561aac62a The system call library can now be built with CONFIG_NUTTX_KERNEL. New select: CONFIG_LIB_SYSCALL 2014-08-28 12:09:49 -06:00
Gregory Nutt
4fa5b52e43 Cortex-A address environments: Fix issue with page privileges 2014-08-28 11:00:41 -06:00
Gregory Nutt
26f6d90fa9 Remove a warning 2014-08-28 10:04:41 -06:00
Gregory Nutt
9be4972862 STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin 2014-08-28 09:11:20 -06:00
Gregory Nutt
35b11a7533 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1 Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
0e9a0150ba ARM: Move address environment switch from the task switchers to the interrupt handler. That may save doing the actin multiple times per interrupt 2014-08-28 06:49:05 -06:00
Gregory Nutt
540a7e4a35 ARM: Move address environment switch from the task switchers to the interrupt handler. That may save doing the actin multiple times per interrupt 2014-08-28 06:34:09 -06:00
Gregory Nutt
756054d745 Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
8ec74b1a9e Minor address environment clean-up. Cannot generate debug contexts in certain contexts 2014-08-27 14:22:00 -06:00
Gregory Nutt
dd80c63af6 CC3200 Launchpad updates 2014-08-26 16:31:47 -06:00