Commit 5d1a444812 replaced __attribute__
((unused)) with unused_code but two instances of __attribute__ ((used))
were also incorrectly replaced. Add used_code/used_data and used them
instead.
Some toolchains may be built without libm support, but using
such toochain should not generate any errors in case if math
functions are not used in the program
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Add two config flags for each hart for a bootloader nuttx:
CONFIG_MPFS_HARTx_SBI :
- select whether the hart boots via opensbi or not.
CONFIG_MPFS_HARTx_ENTRYPOINT :
- the target address to jump to, either directly from startup code or
from SBI if CONFIG_MPFS_HARTx_SBI is set
This allows building a nuttx based bootloader application, which can load
different applications/OSs for individual harts and jump to those
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Hart index to hart id table is used to track unused and used harts. This
table is useful when configuring only some of the harts for OpenSBI use.
Mpfs will always have the hart0 unused, so mark it with -1.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
- Define RV_MMU_PT_LEVELS as the arch max
- Add way to find the PPN from a PTE
- Make utility function to create a satp register value, instead of
combining this to mmu_enable
- Add function to read the current satp value
- Add function to write the satp register, also fix the fence instruction
Sv39 is the only mode supported for now. However, it should be trivial
to extend the driver to support the other modes (including Sv32) as well.
The driver is tested with mpfs only, but it should work with any riscv
implementation.
u-boot/kernel may use any uart, not just uart1, depending
on the device tree configuration. They will also reset the
corresponding uarts as well. It doesn't need to be done
here.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This drops the dependency to riscv_internal.h which ensures
less redefinition conflicts. OpenSBI declares some of the
variables again which are spread in many NuttX files.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
There is no such section. Instead, place the object mpfs_head.o at the start of
the text.
Put mpfs_head.o directly into the arch library; there is no need to define
it separately in HEAD_ASRC.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Add a new configuration for CONFIG_N_IRQ_STACKS, whcih defaults to
CONFIG_SMP_NCPUS or 1
- this allows configuring multiple IRQ stacks also in the case where SMP
support is not needed
- this is specifically needed in mpfs target, where "bootloader" build boots
only on one hart, but the startup code executes on all harts and handles SW IRQs
Also don't store/restore GP if RISCV_SAVE_GP is not defined. If the GP is not
stored in fork, it can't be restored for new tasks
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Some SoC like bl602 require the exception entry 8 byte align, it should
be safe for other chips so we can apply it globally.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
fw_start and fw_size were miscalculated. What was needed
was the pointed values of the offsets __mpfs_nuttx_start
and __mpfs_nuttx_end, not the values they had in place.
Also add the next_arg1 initialization.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
