sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,532 Commits 1 Branch 0 Tags 291 MiB
99639f2d48
Commit Graph

2673 Commits

Author SHA1 Message Date
Gregory Nutt
c35470d553 TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho 2014-03-18 11:21:31 -06:00
Gregory Nutt
7e2436d4cc SAM4E: Fix a few more UDP bring-up bugs. Still not working 2014-03-18 11:00:20 -06:00
Gregory Nutt
d5364f85b2 SAM4E: Revise board-specific USB MSC support 2014-03-18 09:31:02 -06:00
Gregory Nutt
2e586f04ab SAM4E: Add USB full speed device (UDP) driver 2014-03-17 12:37:55 -06:00
Gregory Nutt
b74e183dac SAM3/4: Fleshing out environment to support USB device (UDP) 2014-03-16 14:11:22 -06:00
Gregory Nutt
1d1b0e84c8 SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts 2014-03-14 11:57:42 -06:00
Gregory Nutt
adcfb40d01 SAM3/4 DMA fixes in general for SPI DMA in particular 2014-03-14 11:25:16 -06:00
Gregory Nutt
483fcdca03 SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work. 2014-03-13 15:54:09 -06:00
Gregory Nutt
d32b85a938 SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash 2014-03-13 14:07:35 -06:00
Gregory Nutt
c0c2fc4afe Backport SPI driver enhancements from SAMA5 to SAM3/4 2014-03-13 10:34:35 -06:00
Gregory Nutt
a300a46c8d SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default 2014-03-13 09:03:03 -06:00
Gregory Nutt
fe9460d314 SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
Gregory Nutt
907d273c4a SAM4E: Add support for the Cortex-M Cache Control block 2014-03-12 12:38:39 -06:00
Gregory Nutt
8e6bfea5aa SAM4E: Various bring-up fixes. NSH now works 2014-03-12 10:59:19 -06:00
Gregory Nutt
dfdad8c95b TM4C: Fix typos in memory map reported by Daniel Pereira de Carvalho 2014-03-12 07:23:58 -06:00
Gregory Nutt
f2f80f0813 SAM4E-EK: Purely cosmetic updates 2014-03-11 10:44:00 -06:00
Gregory Nutt
6638022126 SAM4E-EK: Add basic board support 2014-03-10 15:18:46 -06:00
Gregory Nutt
b25d2ace89 TM4C: A few more changes to get a clean compilation 2014-03-10 11:54:20 -06:00
Gregory Nutt
a659029017 Make sure that every reference to LM4F has corresponding logic for TM4C 2014-03-10 11:23:50 -06:00
Gregory Nutt
4a199188c8 TM4C: Add SYSCONTROL register defintion header file 2014-03-10 10:17:37 -06:00
Gregory Nutt
c9e6775d0c Add support for TM4C GPIOs 2014-03-10 08:12:35 -06:00
Gregory Nutt
967d48fbfb TIVA: Add memory map for the TM4C123 2014-03-09 13:57:35 -06:00
Gregory Nutt
8e08a25f11 Add pin multiplex definitions for the TM4C123 2014-03-09 13:15:09 -06:00
Gregory Nutt
7ac3ada62a TM4C: Add definitions for GPIO interrupts 2014-03-09 10:00:31 -06:00
Gregory Nutt
1c3627901f Add TM4C123 to the configuration system 2014-03-09 09:40:48 -06:00
Gregory Nutt
9889391ab8 Oop.. everything was named TM3C instead of TM4C in the last check-in 2014-03-09 09:26:29 -06:00
Gregory Nutt
b10bc3238b TM3C123: Add chip characteristics and interrupt definition files 2014-03-09 09:21:06 -06:00
Gregory Nutt
cb10073586 Hmmm.. not sure what happened but here is a missing TIVA file 2014-03-08 16:33:56 -06:00
Gregory Nutt
6cd5f3d321 functions and definitions renamed from lm_ to tiva_ 2014-03-08 15:50:26 -06:00
Gregory Nutt
8f5dfc3541 All files and functions beginning with lm_ changed to tiva_ 2014-03-08 13:29:09 -06:00
Gregory Nutt
88c2da5bc1 The old lm/ directories were enamed tiva/ to better support new products coming down the pipe from TI 2014-03-08 12:31:06 -06:00
Gregory Nutt
0fb4a075d1 LPC2378: SPI driver from Lizhuoyi 2014-03-08 11:37:50 -06:00
Gregory Nutt
1bdc4273bb LPC2378: I2C driver from Lizhuoyi 2014-03-08 11:03:58 -06:00
Gregory Nutt
729a3020a7 Fix some confusion in the code about vectored interrupts; fix so that it builds with prioritized interrutps disabed 2014-03-08 10:57:11 -06:00
Gregory Nutt
88d3bc23e1 onfigs/mx1ads/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:48:25 -06:00
Gregory Nutt
8fcd60b5df Use common naming for rest of the toolchains too 2014-03-05 16:29:58 -06:00
Gregory Nutt
18a08fe1d1 Use common naming for all buildroot toolchains 2014-03-05 15:37:07 -06:00
Gregory Nutt
40621d42fc Add configuration ettings for the on-demand paging option 2014-03-05 14:25:49 -06:00
Gregory Nutt
6526c47930 configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:16:02 -06:00
Gregory Nutt
c99476c950 configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools 2014-03-04 08:58:01 -06:00
Gregory Nutt
f3168c222b configs/mcu123-lpc214x/usbmsc: Configuration converted to use the kconfig-frontends tools 2014-03-03 15:40:18 -06:00
Gregory Nutt
216859842a configs/olimex-strp711/nettest: Converted to use kconfig-frontends tools 2014-03-03 10:52:02 -06:00
Gregory Nutt
705a68349b configs/c5471evm/nettest converted use kconfig-frontends. C5471 build updated 2014-03-03 10:05:06 -06:00
Gregory Nutt
74414b9762 arch/arm/src/lpc2378/Kconfig: Create Kconfig for the platform; Adjust configuration names for compatibility, configs/olimex-lpc2378/nsh: Convert to use the kconfig-frontends tools 2014-03-02 11:08:23 -06:00
Gregory Nutt
740a3ce1b9 Removed unused configuratin variable: CONFIG_PGTABLE_VADDR 2014-03-01 16:21:28 -06:00
Gregory Nutt
210fbc3365 configs/lm3s8962-ek/nsh converted to use the kconfig-frontends tools 2014-03-01 13:29:23 -06:00
Gregory Nutt
306271d151 Buildroot EABI (vs OABI) is now the default 2014-02-28 07:49:15 -06:00
Gregory Nutt
885a20d929 SAM3/4: Cosmetic updates to ADC register defintion header files 2014-02-27 08:41:03 -06:00
Gregory Nutt
095df26ed3 SAM4E: Completes all SAM4E register definition header files. Also a SAMA5D3 ADc register definition fix 2014-02-26 17:00:22 -06:00
Gregory Nutt
836f83f0c9 SAM4E: Add AES and AFEC register definition header files (AFEC incomplete) 2014-02-26 15:11:20 -06:00
Gregory Nutt
82bd647951 SAM4E: Add CAN and RSWDT register definition header files 2014-02-26 14:14:19 -06:00
Gregory Nutt
07adb58099 SAM4E: Add EMAC register definition header file 2014-02-26 11:57:42 -06:00
Gregory Nutt
28cf673bb0 SAM4E: Add CMCC register definition header file 2014-02-26 09:25:57 -06:00
Gregory Nutt
623b2522ff SAM4E: UDP register definition header file 2014-02-25 13:39:00 -06:00
Gregory Nutt
3d12bc9830 SAM3/4: Fix some build errors that crept in with the SAM4E support 2014-02-25 12:41:38 -06:00
Gregory Nutt
069f0f2d6a SAM4E: Update SAM3/4 TC and DMAC register definition header files 2014-02-25 10:56:23 -06:00
Gregory Nutt
e93d2da742 SAM4E: Update SAM3/4 ACC, DACC, and PDC register definition header files 2014-02-24 14:48:33 -06:00
Gregory Nutt
af8760e467 SAM4E: Update SAM3/4 GPBR, HSMCI, PWM, RSTC, RTC, RTT, SMC, and WDT register definition header files 2014-02-24 12:38:19 -06:00
Gregory Nutt
47d8cf4e62 SAM4E: Update SAM3/4 SMC and SUPC register definition header files 2014-02-24 10:26:44 -06:00
Gregory Nutt
d20d82b90e SAM4E: Update SAM3/4 EEFC, MATRIX, and PMC register definition header files 2014-02-24 09:49:02 -06:00
Gregory Nutt
36ead78f07 ARMv6-M/ARMv7-M: Correct a register handling error in signal delivery (Kernel build mode only). Noted by Mike Smith. 2014-02-23 08:25:49 -06:00
Gregory Nutt
07ae9d60e0 SAM4E: USART/USART header files and drivers updated to support the SAM4E 2014-02-22 13:46:23 -06:00
Gregory Nutt
956314b113 SAM4E: update SAM3/4 Kconfig for SAM4E peripheral selections 2014-02-22 11:56:04 -06:00
Gregory Nutt
291f4e61ca Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips 2014-02-22 10:38:25 -06:00
Gregory Nutt
873ceb2d6d SAM4E: Update PMC and SPI register definition header files 2014-02-22 10:32:28 -06:00
Gregory Nutt
acba69d9a4 SAM4E: Pin multiplex definition header file 2014-02-21 18:10:53 -06:00
Gregory Nutt
ff92f4f81f SAM4E: Add support for PIO and peripheral clocks 2014-02-21 12:34:04 -06:00
Gregory Nutt
1b0fce86ad SAM4E: Add memory map header file 2014-02-21 09:33:16 -06:00
Gregory Nutt
159938e6d8 SAM4E: Add vector definition header files 2014-02-21 08:46:16 -06:00
Gregory Nutt
2b4464e716 unlink/rm can now be used on nodes in the pseudo-filesystem. There is new configuration option to suppress these costly and mostly useless operations on the pseudo-filesystem 2014-02-20 18:14:02 -06:00
Gregory Nutt
462ea02c0c SAMD20: Some progress debugging SPI. Currently hangs 2014-02-20 15:20:42 -06:00
Gregory Nutt
9c1d9e44d4 SAMD20: Changes for clean build of SPI driver and SAMD20 Xplained Pro board with the I/O1 module installed 2014-02-20 11:27:59 -06:00
Gregory Nutt
d2bb6f3e0f SAMD20: SPI driver is code-complete, but untested 2014-02-20 09:59:54 -06:00
Gregory Nutt
07f750ba3d SAMD: A little more SPI logic 2014-02-19 18:48:59 -06:00
Gregory Nutt
7f8a0a01c7 LM3/4: Several errors were unmasked with UARTs > UART2 were enabled. Fromo Gosha 2014-02-19 17:02:30 -06:00
Gregory Nutt
172699fc96 SAMD20: Add a framework for an SPI driver 2014-02-19 16:52:12 -06:00
Gregory Nutt
0d47805ee4 SAMD20: Move some common SERCOM logic to a separate file where it can be shared 2014-02-19 14:47:04 -06:00
Gregory Nutt
c8757cb0e6 STM32 Timer: Set CCMR wehn selecting timer channel. From David Sidrane 2014-02-18 13:50:46 -06:00
Gregory Nutt
a916f2a008 STM32 SPI: Disable SPI before modifying CR1 2014-02-18 13:42:20 -06:00
Gregory Nutt
0c19cc2c13 More STM32F429 Discovery FPU-related changes from David Alessio 2014-02-18 12:07:17 -06:00
Gregory Nutt
c461be6b32 SAMD20: Increase FLASH waitstates to 2 2014-02-18 10:37:42 -06:00
Gregory Nutt
828dd726d9 Mostly cosmetic clean-up of comments 2014-02-17 19:22:53 -06:00
Gregory Nutt
26db6a7609 SAMD20: Fix BAUD calculation. Now comes up okay about 20% of the time 2014-02-17 18:09:17 -06:00
Gregory Nutt
e96a160a24 SAMD20: Now runs, but no serial output 2014-02-17 14:21:22 -06:00
Gregory Nutt
c7c149c42f SAMD20: Initial debug changes to get clocking 2014-02-17 11:36:52 -06:00
Gregory Nutt
ae3b20b04b SAMD20: Misc changes for a clean build with debug enabled 2014-02-17 08:14:19 -06:00
Gregory Nutt
6841f0b627 SAMD20: Add WDT and EVSYS register definition header files 2014-02-16 17:21:36 -06:00
Gregory Nutt
af0cc639d8 SAMD20: Add I2C slave register definition header file 2014-02-16 14:44:03 -06:00
Gregory Nutt
3ccf90b949 SAM20D: Add SPI and I2C master register definition header files 2014-02-16 13:07:31 -06:00
Gregory Nutt
46348a29bb SAMD20: The basic port is complete but still untested 2014-02-16 11:34:32 -06:00
Gregory Nutt
b219b3c7f6 SAMD20: Completes low-level USART logic 2014-02-16 09:42:29 -06:00
Gregory Nutt
305df5ccf1 SAMD20: More SERCOM USART configuration logic 2014-02-15 17:53:55 -06:00
Gregory Nutt
4fc57e3c6a SAMD20: A little more USART logic 2014-02-15 15:58:48 -06:00
Gregory Nutt
2ec06dc52f SAMD20: Beginning of SERCOM UART configuration logic 2014-02-15 14:22:56 -06:00
Gregory Nutt
dfb75147df SAM D20: Add SERCOM USART register definition header file 2014-02-15 11:37:09 -06:00
Gregory Nutt
7c82d29dda SAMD20: Finishes basic clock configuration logic 2014-02-15 10:18:05 -06:00
Gregory Nutt
3a541ece74 SAM D20: More clock configuration logic (still incomplete) 2014-02-14 16:46:21 -06:00
Gregory Nutt
32c23c6af0 SAM D20: Put fuse related definition in a separate header file so make license statement cleaner 2014-02-14 14:33:34 -06:00
Gregory Nutt
6017cd842b SAM D20: A little more clock configuration logic (still incomplete) 2014-02-14 13:38:56 -06:00
Gregory Nutt
39f0f6dbb7 SAMD20: Add NVMCTRL register definition header file. Also empty framework for clock configuration 2014-02-14 11:03:22 -06:00
Gregory Nutt
4ea8d21fcc STM32 serial: Fix clone typo.. FLOWCONROL vs FLOWCONTROL 2014-02-14 09:09:56 -06:00
Gregory Nutt
f30412753e SAMD20: Add SYSCTRL register definition header file 2014-02-13 15:41:16 -06:00
Gregory Nutt
6fd6c6e11d SAMD20: Add GCLK and PM register definition header files 2014-02-13 14:07:58 -06:00
Gregory Nutt
6efc562419 SAMD20: Add port configuration logic 2014-02-13 12:44:22 -06:00
Gregory Nutt
f1b69a0460 Add SAMD20 pin configuration definitions 2014-02-13 10:56:15 -06:00
Gregory Nutt
eb769a9a0d Minimal changes to get a clean compilation of the SAMD20 Xplained configuration. Still a lot of missing logic 2014-02-13 09:14:03 -06:00
Gregory Nutt
c9b48b043c Fix-up some SAMD20 SERCOM conditionals 2014-02-12 18:29:23 -06:00
Gregory Nutt
991a897f09 Add initial support for the Atmel SAMD20 Xplained Pro board 2014-02-12 17:50:58 -06:00
Gregory Nutt
6fea68c36e Add basic framework to support the Atmel SAMD Cortex-M+ chip 2014-02-12 15:07:11 -06:00
Gregory Nutt
05cf59feef Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
Gregory Nutt
e3b409a436 More changes to reduce complaints from CppCheck. Some latent bugs fixes, but probably some new typos introduced 2014-02-10 19:11:56 -06:00
Gregory Nutt
b3792fcd86 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
16e3293e69 USB HID mouse: Fixes the basic data transfer model. Returned position data is still bad 2014-02-09 16:50:09 -06:00
Gregory Nutt
0920195725 LPC17 USB Host: Fix a compile error when USB debug is enabled 2014-02-09 15:54:58 -06:00
Gregory Nutt
976e178ac4 Fix a compile error that crept into the LPC17xx USB host driver 2014-02-09 13:45:18 -06:00
Gregory Nutt
2865608743 A10 had the same cut'n'paste error as did the LM4F 2014-02-03 17:22:47 -06:00
Gregory Nutt
06008553a2 Fix cut'n'paster errors in conditional compilation. Prevented LM4F120 Launchpad UARTs 2-7 from being used 2014-02-03 17:00:05 -06:00
Gregory Nutt
0d325c213f A10: Make sure it is tolerant of CONFIG_BOOT_SDRAM_DATA 2014-01-29 08:16:02 -06:00
Gregory Nutt
6e6b048e5a SAMA5: Fix logic for running with data in SDRAM 2014-01-29 07:49:23 -06:00
Gregory Nutt
e29e0f1cc4 ARMv7-A: Conditionally compile out more unneeded logic when .data and .bss are in SDRAM 2014-01-28 16:39:08 -06:00
Gregory Nutt
93bd80b080 SAMA5: Mostly cosmetic 2014-01-28 15:54:03 -06:00
Gregory Nutt
51e64910a0 SAMA5: More variables-in-SDRAM stuff 2014-01-28 15:05:19 -06:00
Gregory Nutt
c930554c2c Add support for .data and .bss in SDRAM 2014-01-28 14:35:03 -06:00
Gregory Nutt
4aee332cd1 Add option to indicatet that data is retained in SDRAM 2014-01-28 10:42:49 -06:00
Gregory Nutt
ddd678e45b Remove EFM32 from build system 2014-01-27 10:41:06 -06:00
Gregory Nutt
26b7316609 Remove support for EFM32. Not ready to be fielded 2014-01-27 08:03:39 -06:00
Gregory Nutt
a26b03d0d0 rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
231889c888 The optimization level can now be selected as part of the configuration 2014-01-24 07:45:35 -06:00
Gregory Nutt
64aa48c60f Assembler changes with the gcc-47 distribution from ARM mean that we need to be explicit about branch one or more of the wide branch opcodes results in bad table branching. From Mike Smith 2014-01-23 15:29:57 -06:00
Gregory Nutt
07d12a800d Basic support for the EFM32 processor family from Richar Cochran 2014-01-23 07:56:10 -06:00
Gregory Nutt
186f6ce828 arch/arm/src/Makefile: dependency directory list is now computed from the VPATH. From Richard Cochran 2014-01-23 07:41:00 -06:00
Gregory Nutt
1061e67f14 Fix error in last ARMv7-M up_disable_irq checkin 2014-01-15 15:26:32 -06:00
Gregory Nutt
e43f86071d Fix all Cortex-M3/4 implementations of up_disable_irq(). They were doing nothing. Thanks to Manuel Stühn for the tip. 2014-01-15 09:56:30 -06:00
Gregory Nutt
4de5e40669 Individual IRQs are not longer disabled on each interrupt. See ChangeLog for detailed explanation 2014-01-15 08:09:19 -06:00
Gregory Nutt
dd4e64d9f3 Changes to get PX4 config to build. Also some warning removal 2014-01-14 13:30:22 -06:00
Gregory Nutt
e37c12e88c A10: Serial clock is OSC24M. From Alan Carvalho de Assis 2014-01-10 15:32:42 -06:00
Gregory Nutt
fc2ff5ad75 Fix types in conditional compilation 2014-01-10 13:36:18 -06:00
Gregory Nutt
b4a577a49e Add support for the XPT2046 touchscreen controller on the Viewtool LCD module 2014-01-09 10:57:17 -06:00
Gregory Nutt
162e240ed3 Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV 2014-01-08 16:44:11 -06:00
Gregory Nutt
363d44b7d0 Cosmetic spaces to tabs change 2013-12-08 10:38:33 -06:00
Gregory Nutt
1cbb15db1a A10: Fix serial TX interrupts 2013-12-08 09:26:53 -06:00
Gregory Nutt
e4358ad7ff A10: Correct handling of the serial busy interrupt 2013-12-08 08:51:19 -06:00
Gregory Nutt
c131e94d04 Add more nops after enabling MMU for Cortex-A8 2014-01-07 08:38:00 -06:00
Gregory Nutt
25abb10ef3 A10: Handle UART BUSY interrupt; Back out change to mkconfig.c -- it causes problems for assembly 2013-12-07 11:46:08 -06:00
Gregory Nutt
e40cc00b06 A10: Add missing interrupt handling logic for UART4-7 and remove bogus flow control logic 2014-01-06 12:08:32 -06:00
Gregory Nutt
f1e44300c6 A10: Fix error in IRQ dispatch; vector table seems to be offset by 64 bytes? 2013-12-07 08:36:30 -06:00
Gregory Nutt
e86f940374 SVC is the preferred mnemonic vs. SWI for cortex A 2014-01-05 16:21:41 -06:00
Gregory Nutt
0673a9564c Oops. Mnemonic changed from SWI to SVC in cortex A 2014-01-05 15:59:49 -06:00
Gregory Nutt
b9816723a5 Add ARMv7-A syscall.h header file 2014-01-05 15:49:06 -06:00
Gregory Nutt
e83bd3e961 Viewtools STM32F103: Add SSD1289 LCD support 2014-01-05 14:14:59 -06:00