Commit Graph

450 Commits

Author SHA1 Message Date
liuhaitao
459ad99373 Use EXTRAFLAGS instead of EXTRADEFINES to be used by make via command line
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.

Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-11 08:31:08 -06:00
ligd
231ad202ee global change: repace sched_xfree() to kxmm_free()
Changes:
sched_xfree() => kxmm_free()
remove garbage related APIs
remove ARCH_HAVE_GARBAGE

Cause garbage feature move to mm_heap, then don't need
garbage anymore.

Change-Id: If310790a3208155ca8ab319e8d038cb6ff92c518
Signed-off-by: ligd <liguiding@fishsemi.com>
2020-04-09 10:29:28 -06:00
Alin Jerpelea
425e6c28dc
arch: xtensa: esp32: nxstyle fixes (#753)
esp32 nxstyle fixes

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-08 08:28:17 -06:00
hartmannathan
bfc153ca27
Fix typos in comments and documentation (#750)
* Fix typos in comments and documentation
2020-04-08 06:45:35 -06:00
Nathan Hartman
679b4fbee2 arch: Fix included directed -> included directly
This typo had been copied and pasted into numerous irq and syscall
headers.
2020-04-05 22:31:15 +01:00
YAMAMOTO Takashi
4ddb457c3e Fix a typo in comments 2020-04-01 00:03:31 +08:00
YAMAMOTO Takashi
f8f5830410 xtensa: Implement CONFIG_ARCH_IDLE_CUSTOM 2020-03-31 15:50:04 +08:00
YAMAMOTO Takashi
123b3d92df xtensa: Check XCHAL_HAVE_INTERRUPTS for waiti 2020-03-31 14:32:07 +08:00
YAMAMOTO Takashi
b9bf9c9a2b xtensa: Save PS correctly in coproc handler
"EPS" is not a real register. It's just a base value of EPS_{2..7}.
2020-03-31 14:31:31 +08:00
YAMAMOTO Takashi
d2a6e56308 xtensa: Save PS correctly in double exception handler
"EPS" is not a real register. It's just a base value of EPS_{2..7}.
2020-03-31 14:31:31 +08:00
YAMAMOTO Takashi
18d3fa9eea xtensa: Save PS correctly in syscall handler
"EPS" is not a real register. It's just a base value of EPS_{2..7}.
2020-03-31 14:31:31 +08:00
YAMAMOTO Takashi
1ffa009c8b Revert "Don't generate .depend anymore"
This reverts commit 79af7fbf4e.

Because:

* btashton reported some issues in local builds:

  https://github.com/apache/incubator-nuttx/pull/603#issuecomment-602264860

* this might be related to the current CI breakage:

  > /bin/sh: 1: /__w/incubator-nuttx/incubator-nuttx/nuttx/tools/mkdeps: not found
2020-03-22 23:07:29 -05:00
Xiang Xiao
79af7fbf4e
Don't generate .depend anymore 2020-03-22 18:15:29 +00:00
Masayuki Ishikawa
6baebcecc4 arch: esp32: Fix compile error for smp 2020-03-19 19:40:18 -06:00
Nathan Hartman
a5e643b0cd Fix typos in comments and documentation. 2020-03-16 20:01:11 -06:00
YAMAMOTO Takashi
f4e7845b85 esp32: emulate byte access for module text
Tested on ESP-EYE.
2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
855751b534 Introduce instruction memory allocator
Necessary for dlfcn etc on ESP32, which has separate memory regions
for instruction and data.

known issues/todo
 * consider something similar to dual heaps for PROTOECTED
 * consider to adapt binfmt as well
2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
03a916acb8 Kconfig: Add kconfig options for module text allocator
Enable it for ESP32.
2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
e135c938d2 xtensa: Implement a few relocations 2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
8657305883 arch/xtensa/include/elf.h: Initial version 2020-03-16 07:54:49 -06:00
YAMAMOTO Takashi
5a716b799b xtensa_user_handler: rsync after wsr.ps 2020-03-16 07:31:46 -05:00
YAMAMOTO Takashi
3b528c6010 xtensa_user_handler: Save PS correctly
"EPS" is not a real register. It's just a base value of EPS_{2..7}.
2020-03-16 19:13:33 +09:00
YAMAMOTO Takashi
951cfbd1d5 xtensa_user_handler: Fix registers in comments 2020-03-16 05:08:43 -05:00
YAMAMOTO Takashi
7aebcc4bf6 xtensa_user_handler: Fix registers in comments 2020-03-16 02:24:16 -05:00
YAMAMOTO Takashi
23db3b2a48 ESP32: Use __asm__ __volatile__ for inline assembly 2020-03-13 19:06:15 -06:00
YAMAMOTO Takashi
3a03a307b9 arch/xtensa/src/common/xtensa_abi.h: nxstyle fixes
The remaining errors:

    Operator/assignment must be preceded with whitespace

I didn't fix them because they are in assembly code, which
nxstyle doesn't understand.
2020-03-13 18:58:04 -06:00
YAMAMOTO Takashi
086e8ffb12 arch/xtensa/src/esp32/esp32_cpustart.c: nxstyle fixes
The remaining errors:

    Mixed case identifier found

I didn't fix them because they were on ROM symbols,
which are not supposed to obey NuttX's coding style.
2020-03-13 18:51:26 -06:00
YAMAMOTO Takashi
9aec40744c xtensa_hostfs.c: Change the license to Apache 2.0
This file is based on arch/arm/src/common/up_hostfs.c.
The license change was ok'ed by the author. (@xiaoxiang781216)
2020-03-12 09:03:31 -05:00
YAMAMOTO Takashi
7a06ff0392 xtensa: hostfs using simcall
Tested on qemu -semihosting
2020-03-12 09:03:31 -05:00
YAMAMOTO Takashi
c18d7dc434 xtensa: Implement simcall 2020-03-12 09:03:31 -05:00
YAMAMOTO Takashi
7774cdd7aa Appease many of nxstyle errors for esp32 related files
I skipped the following files because they were not simple.
I'll create separate PRs.

    arch/xtensa/src/esp32/esp32_cpustart.c
    arch/xtensa/src/common/xtensa_abi.h
    boards/xtensa/esp32/esp32-core/include/board.h

Also, I skipped the following files and directories because
they looked too huge and/or foreign.

    arch/xtensa/include/esp32/tie.h
    arch/xtensa/include/xtensa/xtensa_corebits.h
    arch/xtensa/src/esp32/hardware/
    arch/xtensa/include/esp32/tie-asm.h
    arch/xtensa/include/esp32/core-isa.h
    arch/xtensa/include/xtensa/core.h

I also fixed a few "is is" style typos when unwrapping long lines.
2020-03-12 07:45:44 -06:00
Masayuki Ishikawa
da3fb9c94f arch: xtensa: Call the waiti instruction in up_idle()
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-03-06 01:46:09 -06:00
Masayuki Ishikawa
a5cb0b3731 arch: xtensa: Fix SMP related logic
NOTE: Applied the same logic as in other SMP architectures
2020-03-04 23:34:43 -06:00
Masayuki Ishikawa
e16c3ca25b arch: esp32: Fix compile error with xtensa-esp32-elf-gcc 8.2.0 2020-03-04 03:51:13 -06:00
YAMAMOTO Takashi
34b17ec5cb xtensa: Fix up_schedule_sigaction
This fixes various crashes in ostest.
2020-02-28 07:48:16 -06:00
YAMAMOTO Takashi
119a38ce10 xtensa: Fix typos and comments 2020-02-28 11:33:29 +01:00
YAMAMOTO Takashi
930e2788cc xtensa: Use ar and nm from the toolchain
This fixes build on macOS, where native ar is incompatible.
2020-02-26 10:47:26 -06:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
liuhaitao
8ca4ca5ae8 arch: undef USE_SERIALDRIVER if CONFIG_CONSOLE_SYSLOG
An error was introduced from:

  commit f982ee43db
  Author: Xiang Xiao <xiaoxiang@xiaomi.com>
  Date:   Tue Feb 18 09:55:04 2020 +0800

    drivers/serial: Remove the lowconsole driver

    Replace with the syslog console driver which has more capability than lowconsole
2020-02-23 09:10:06 -06:00
Xiang Xiao
bd4e8e19d3 Run codespell -w against all files
and fix the wrong correction
2020-02-22 14:45:07 -06:00
Xiang Xiao
51a2171c71 ramlog: Remove g_ramlog_syslog_channel since it's same as g_default_channel
And remove syslog_init_e because all initialization is later now and we don't
distinguish the initialition phase anymore after ramlog don't need special
initialize.
2020-02-18 13:04:45 -06:00
Xiang Xiao
dcaaf2d912 ramlog: Remove all ramlog_consoleinit related code
Because we can get the same function by CONSOLE_SYSLOG/syslog_console_init.
BTW, it isn't a good choice to use g_ramlogfops as /dev/console since nsh
will read back what it send out which will surprise most people.
2020-02-18 12:57:43 -06:00
Xiang Xiao
f982ee43db drivers/serial: Remove the lowconsole driver
Replace with the syslog console driver which has more capability than lowconsole
2020-02-18 12:51:09 -06:00
Xiang Xiao
6b77f73583 arch: Move iob_initialize into nx_start just after heap initialization
it doesn't make sense that iob initialization is in up_initialize
but other memory components initialization is called in nx_start

Change-Id: Id43aeaa995f340c5943f59a0067a483ff3ac34a2
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-18 10:26:19 -03:00
Xiang Xiao
e7d9260014 arch: Customize the typedef of size_t instead of intptr_t
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG.  The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
2020-02-18 07:15:19 -06:00
Xiang Xiao
6d69439f58 Call xxx_timer_initialize from clock subsystem
Call xxx_timer_initialize from clock subsystem to make timer ready for use as soon as possiblei and revert the workaround:

commit 0863e771a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Apr 26 07:24:57 2019 -0600

    Revert "sched/clock/clock_initialize.c:  clock_inittime() needs to be done with CONFIG_SCHED_TICKLESS and clock_initialize should skip clock_inittime() for external RTC case since the RTC isn't ready yet."

    This reverts commit 2bc709d4b9.

    Commit 2bc709d4b9 was intended to handle the case where up_timer_gettime may not start from zero case.  However, this change has the side-effect of breaking every implementation of tickless mode:  After this change the tickless timer structures are used before they are initialized in clock_inittime().  Initialization happens later when up_initialize is called() when arm_timer_initialize().

    Since the tickless mode timer is very special, one solution might be to

    1. Rename xxx_timer_initialize to up_timer_initialize
    2  Move up_timer_initialize to include/nuttx/arch.h
    3.  Call it from clock subsystem instead up_initialize

    Basically, this change make timer initialization almost same as rtc initialization(up_rtc_initialize).

    For now, however, we just need to revert the change.
2020-02-08 07:40:06 -06:00
Xiang Xiao
76bbed07a4 Call up_irqinitialize from irq subsystem
Call up_irqinitialize from irq subsystem to make the irq ready for use as soon as possible
2020-02-08 07:39:22 -06:00
Xiang Xiao
c5b1554d84 Remove NETDEV_LOOPBACK option, NET_LOOPBACK is enough 2020-02-02 08:25:06 -06:00
Xiang Xiao
5c80b94820 Replace #include <semaphore.h> to #include <nuttx/semaphore.h>
Since the kernel side should call nxsem_xxx instead and remove the unused inclusion
2020-02-01 08:27:30 -06:00
Xiang Xiao
80277d1630
Refine the preprocessor conditional guard style (#190) 2020-01-31 19:07:39 +01:00
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189)
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Ouss4
7dcf8dde7c arch/xtensa/src/esp32/esp32_start.c: A comma was missing in g_idlestack attributes. 2019-12-10 13:42:58 -06:00
Xiang Xiao
800e12fc42 arch/: Add rpmsg_serialini() call to every implementation of up_initialize() for rpmsg uart initialization. 2019-11-04 08:11:50 -06:00
Gregory Nutt
6c2f73774b armv7-a and xtensa: Apply Masayuki Ishakawa's change of cef90a3865 to these these other SMP architectures as well. 2019-10-04 07:17:35 -06:00
Nathan Hartman
68d43d3679 Fix typos. 2019-08-04 14:50:28 -06:00
Gregory Nutt
d5bbbba8ad Rename all remaining arch/xxx/src/xxx/chip to arch/xxx/src/xxx/hardware. 2019-05-25 09:27:28 -06:00
Gregory Nutt
abf6965c24 Squashed commit of the following:
libs/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    syscall/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    wireless/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    Documentation/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    include/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    drivers/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    sched/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    configs:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/xtensa:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/z80:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/x86:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/renesas and arch/risc-v:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/or1k:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/misoc:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/mips:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/avr:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/arm:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
2019-04-29 14:52:05 -06:00
Gregory Nutt
b290160b3b Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly). 2019-03-20 19:27:40 -06:00
Gregory Nutt
3c0f6f4876 arch/xtensa/src/esp32/esp32_serial.c: Fix some backward arguments. Correct 2-stop bit setting.
sched/sched/sched_waitid.c:  Could exit without leaving critical section on some error conditions.
sched/signal/sig_deliver.c: Update some comments.
2019-02-28 11:32:31 -06:00
Gregory Nutt
dc8c814ca3 Squashed commit of the following:
Fixed coding standard error in several files.  Use of while( is incorrect; a space is required between while and (.  Also ran tools/nxstyle and fix thoses complaints as well in most files.

    Changes to comply with coding standard.  Mostly focused on files with missing space after keyword in if(, switch(, and for(.  Offending files also got changes to comply with tools nxstyle.  If there were logs of nxstyle complaints, the file also got a taste of tools/indent.sh.  Still need to fix occurrences of while( with missing space.  There are a lot of them.
2019-02-27 08:41:08 -06:00
Gregory Nutt
95746be5a2 arch/xtensa/src/esp32/esp32_timerisr.c: Fix backward comparison. 2019-02-17 18:02:26 -06:00
Gregory Nutt
a64869aa67 CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense.
Squashed commit of the following:

    configs/:  The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
    fs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    tools/:  Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
    syscall/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    libs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    include/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    drivers/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    Documentation/:  Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
    binfmt/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    arch/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    net/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/Kconfig:  CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
    configs/:  Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 12:09:26 -06:00
Gregory Nutt
a2e62f557d Squashed commit of the following:
sched/init/nx_bringup.c:  Fix a naming collision.
    sched/init:  Rename os_start() to nx_start()
    sched/init:  Rename os_smp* to nx_smp*
    sched/init:  Rename os_bringup to nx_bringup
    sched/init:  rename all internal static functions to begin with nx_ vs os_
2019-02-04 16:20:35 -06:00
Gregory Nutt
bb623d1e04 This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
Squashed commit of the following:

    Trivial, cosmetic
    sched/, arch/, and include:  Rename task_vforkstart() as nxtask_vforkstart()
    sched/, arch/, and include:  Rename task_vforkabort() as nxtask_vforkabort()
    sched/, arch/, and include:  Rename task_vforksetup() as nxtask_vfork_setup()
    sched/:  Rename notify_cancellation() as nxnotify_cancellation()
    sched/:  Rename task_recover() to nxtask_recover()
    sched/task, sched/pthread/, Documentation/:  Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
    sched/task:  Rename task_schedsetup() to nxtask_schedsetup()
    sched/ (plus some binfmt/, include/, and arch/):  Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
    arch/ and sched/:  Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
    sched/task:  Rename all internal, static, functions to begin with the nx prefix.
2019-02-04 13:42:51 -06:00
Gregory Nutt
b1001b4e50 Update TODO list regarding non-queuing of signal actions; Add comments in code at areas where the issue applies. 2019-02-04 08:35:03 -06:00
Gregory Nutt
a77c073797 arch/: Fix an interlock that was broken by commit 641a98a434 in all implementations of up_sigdeliver. 2019-02-03 17:14:32 -06:00
Gregory Nutt
641a98a434 arch/: The saved return register state is available on the user stack. Thic commit reorders some logic so that certain, critical registers are preserved in the TCB. This does not make the logic 100% secure, but does prevent some obvious things. sched/signal/sig_delivery: Add a flag to the TCB to indicate that we are in a signal handler. Use this flag to assure that a there a never attempts to nest signal handling operations on a thread. This was guaranteed before but when locking of pre-emption during signal delivering was eliminated in a previous commit, there was a remote possibility of an attempt to do nested signal handling. This flag assures that there is only one signal handled at a time. 2019-02-03 15:29:47 -06:00
Gregory Nutt
4b9abfa3c2 Every file that uses serial IOCTLs (TIOC*) must explicity include nuttx/fs/ioctl.h. This was included previously via sneak path in the now deleted arch/serial.h. 2019-01-27 13:41:44 -06:00
Xiang Xiao
818d8dda1e Remove empty seria.h and all references 2019-01-26 15:08:14 -06:00
Xiang Xiao
763ba51b78 arch/xxx/src/xxx/up_assert.c: Dump CPU0 IDLE stack only when PID equals 0. IDLE threads of other CPUs do not need this special check 2019-01-26 10:59:23 -06:00
ligd
5a6108c172 arch/xxx/src/common/up_initialize.c: Move up_pminitialize() after timer_initialize() 2019-01-26 07:32:14 -06:00
Gregory Nutt
db24306435 arch/assertion logic: Fix additional places where the test for an IDLE task is incorrect. It is not invalid in all configurations to check for PID==0. However, the logic fixed in these places lackes sufficient intelligence to find the right stack for the CPU IDLE thread and could still show the wrong stack. 2018-12-18 17:45:46 -06:00
Gregory Nutt
ec9265aa95 arch assertions: Correct duplicated logic from commit dbf01d12b7. Checking for PID == zero is not a valid way to test for the IDLE task in all configurations! This is only true in the single CPU configuration. In multiple CPU configurations, there will be a separate IDLE task for each CPU with a different PID. 2018-12-18 17:35:42 -06:00
Gregory Nutt
0af39e1493 arch/: Update all _exit() implementations for all architectures so that they correctly called the scheduler instumentation layer for the new task that runs when the old one exits. This missing instrumentation was confusing the Critical Section Monitor logic with uses this instrumentation to track the state of critical sections. 2018-11-24 18:20:57 -06:00
Xiang Xiao
dbf01d12b7 Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch. 2018-11-15 07:11:51 -06:00
Xiang Xiao
543f4ed8ec arch/ all assertion functions: up_assert move the register dump to first make the more important info first 2018-11-11 12:53:59 -06:00
Xiang Xiao
dfe788be25 arch/ all assertion functinos: up_stackdump dump the full stack if stack overflow the stack info is very useful to find the backtrace 2018-11-11 12:52:36 -06:00
Xiang Xiao
e4106a3744 arch/ assertions files: up_registerdump capture the general register if not yet saved and up_saveusercontext is implemented, the register dump is very useful to find the cause of failure. 2018-11-11 12:50:50 -06:00
Gregory Nutt
2b3ec4172d arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. 2018-11-10 14:06:46 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong. 2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
8aa486515e arch/: Correct critical section logic associated with the recent signal handler changes (yet again). 2018-06-06 17:39:10 -06:00
Gregory Nutt
b5c6d9c849 Update some comments. 2018-06-06 17:20:01 -06:00
Gregory Nutt
a581d7c2e3 arch/: Relasted to last big change to force interrupts to be disabled. In the SMP case, we still must call leave_critical_section() at least once in order to compensate for the fact that the irqcount was incremented in up_schedsigaction(). 2018-06-06 17:04:12 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte:
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
2018-06-06 09:54:30 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
c260ef5d59 arch/xtensa/common: Port the SMP change by Masayuki Ishikawa to the Xtensa family. 2018-02-14 08:58:22 -06:00
Gregory Nutt
1e59d9dd14 armv7-a, armv7-r, armv7-m: Add atomic read-add-write and read-subtract-write functions. 2018-02-04 12:22:03 -06:00
Gregory Nutt
2683f713ab Make sure that labeling is used consistently in all function headers (part 3). 2018-02-01 12:17:03 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Sungki Kim
d9c1f37ed5 modify default uart pin for ESP-WROOM-32 2017-08-13 22:42:42 +09:00
Sungki Kim
dbe4978c6a fix gpio enable reg 2017-08-13 22:42:10 +09:00
Gregory Nutt
1c5ec07414 arch/: Remove dangling space at the end of lines. 2017-06-28 13:16:48 -06:00
Gregory Nutt
7fe112fe4c Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition. 2017-05-13 11:44:12 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
370e188fa3 Convert more drivers to use new interrupt argument structure. 2017-02-28 09:05:01 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
0db31d0cd1 SMP: Fix a typo introduced in c5b00ccfc4 2017-01-16 08:48:05 -06:00
Gregory Nutt
a2083fbc92 Update some comments 2017-01-15 12:35:03 -06:00
Gregory Nutt
2837eff0cd SMP: Most cosmetic clean-up from review of previous commit. 2017-01-14 09:22:13 -06:00
Gregory Nutt
c5b00ccfc4 SMP Signals: Fix some SMP signal delivery logic. Was not handling some critical sections correctly and was missing logic to signal tasks running on other CPUs. 2017-01-14 08:28:37 -06:00
Gregory Nutt
3ed091376c In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts. 2017-01-13 11:08:24 -06:00
Gregory Nutt
c9b15ebb6a Xtensa ESP32: Remove call to sched_lock()/unock() from inter-cpu interrupt logic. Results in recursive call to sched_mergepending(). 2016-12-25 09:26:20 -06:00
Gregory Nutt
b87fc91466 Revert "Xtensa SMP: Avoid a nasty situation in SMP by assuring that up_release_pending() is not re-entered."
This reverts commit 733a57b4df.
2016-12-25 07:12:46 -06:00
Gregory Nutt
efb86382c3 SMP: Back out deferred IRQ locking. This was accidentally merged into master and it looks like it is going to be more work than I thought to get it working again. Changes will go to the irqlock branch. 2016-12-24 19:53:37 -06:00
Gregory Nutt
1b790a61cd Xtensa ESP32: Add stack checking logic. 2016-12-23 15:51:33 -06:00
Gregory Nutt
c7f5435637 Implement deferred IRQ locking. The rest of the support for Xtensa. Untested. 2016-12-23 11:56:45 -06:00
Gregory Nutt
cb1cc66d81 Implement deferred IRQ locking. Adds partial support for Xtensa. More is needed. 2016-12-23 11:39:44 -06:00
Gregory Nutt
5f9caad078 Xtensa ESP32: Correct copyright info; update some comments 2016-12-22 12:34:55 -06:00
Gregory Nutt
714e6f80ca Xtensa ESP32: Corrects a problem with dispatching to signal handlers: Cannot vector directly to the signal handling function as in other ABIs under the Xtensa Window ABI. In that case, we need to go through a tiny hook when performs the correct window call (call4) otherwise registers will be scrambled in the signal handler 2016-12-22 11:19:38 -06:00
Gregory Nutt
d9a64b9ca9 Xtensa ESP32: Some fixes from integration of ostest configuration. Almost works: There are some assertions in xtensa_sigdeliver() 2016-12-22 09:34:39 -06:00
Gregory Nutt
733a57b4df Xtensa SMP: Avoid a nasty situation in SMP by assuring that up_release_pending() is not re-entered. 2016-12-21 13:34:01 -06:00
Gregory Nutt
588d2b506f Xtensa ESP32: Oddly, an rsync barrier when writing to co-processor register corrects problem. 2016-12-21 08:04:48 -06:00
Gregory Nutt
1b7162a0db Eliminate a warning 2016-12-21 08:04:48 -06:00
Gregory Nutt
81697f2285 Xtensa ESP32: Fix APP CPU startup... Can't use semaphores on the IDLE thread. 2016-12-20 11:26:37 -06:00
Gregory Nutt
6d5a718b98 Xtensa ESP32: A few fixes for APP CPU start-up 2016-12-20 10:38:27 -06:00
Gregory Nutt
4e9a0ffea5 Xtensa ESP32: Update APP CPU startup logic to match current Expressif example code. 2016-12-20 09:00:04 -06:00
Gregory Nutt
3b681586c0 Xtensa ESP32: Missing prologue/epilogue macros on C callable function 2016-12-20 08:31:36 -06:00
Gregory Nutt
e5182acbe3 Xtensa ESP32: Make sure that SMP configuratin still builds without errors. 2016-12-19 14:12:19 -06:00
Gregory Nutt
e61549d8b9 Xtensa ESP32: Clean-up and fixes from last commits 2016-12-19 13:57:37 -06:00
Gregory Nutt
097f09cb02 Xtensa ESP32: Corrects timer initialization and timer input frequency. 2016-12-19 11:50:28 -06:00
Gregory Nutt
a9a39800a4 Xtensa ESP32: Fixes some double faults and user errors, but I do not fully understand why. 2016-12-19 11:14:08 -06:00
Gregory Nutt
886ce88b4f Xtensa ESP32: Automatically mount /proc at start-up. 2016-12-19 09:43:16 -06:00
Gregory Nutt
2b0b698d72 ESP32 Serial: Add logic to prevent infinite loops in interrupt handler. 2016-12-18 16:04:25 -06:00
Gregory Nutt
71bb79a6c7 ESP32 Serial: Fix some register bit definitions. 2016-12-18 15:11:34 -06:00
Gregory Nutt
4bd530d026 Xtensa ESP32: Last change should be conditioned on the window ABI. 2016-12-18 13:17:31 -06:00
Gregory Nutt
665c1647b5 Xtensa ESP32: Need to spill registers to memory as the last dying action before switching to a new thread. 2016-12-18 12:54:47 -06:00
Gregory Nutt
586f0aab50 Fix context save logic when called in window ABI configuration. Add an IDLE stack. Don't depend on the mystery stack received from the bootloader. 2016-12-18 10:08:08 -06:00
Gregory Nutt
93e6d16f75 Xtensa ESP32: wsr, not rsr. 2016-12-17 11:23:10 -06:00
Gregory Nutt
a88c50d366 Xtensa ESP32: Need to clone some logic for syncrhonous context switch. Window spill logic in the conmon restores logic is inappropriate in this context 2016-12-17 11:00:12 -06:00
Gregory Nutt
6b80e5f15f Xtensa ESP32: Fix clobbered a9 in co-processor context save/restore 2016-12-17 11:00:12 -06:00
Gregory Nutt
8de1127899 Xtensa ESP32: Using wrong register to disable interrupts. 2016-12-17 11:00:12 -06:00
Gregory Nutt
38ebe6c13f Xtensa ESP32: Change that should have been included in a previous commit was not. 2016-12-17 08:11:32 -06:00
Gregory Nutt
05e798488b One register getting clobber on context save 2016-12-17 08:10:10 -06:00
Gregory Nutt
adbacfc42c Xtensa ESP32: Fix a duplicate in Kconfig files. Level 1 should return via RFE. 2016-12-17 07:07:33 -06:00
Gregory Nutt
6599feb310 Xtensa ESP32: Fixes a few issue with restoring registers on interrupt return, but there is still a problem 2016-12-16 17:56:22 -06:00
Gregory Nutt
cdd8dc72a5 Xtensa ESP32: Basically a redesign of the interrupt dispatch logic. 2016-12-16 15:36:52 -06:00
Gregory Nutt
d4ad5f04d3 Xtensa ESP32: Minor rearchitecting of how CPU interrupts are enabled. MOre to come. 2016-12-16 14:13:09 -06:00
Gregory Nutt
cd3d414ba2 Xtensa: Fix some missing SMP logic 2016-12-16 13:37:28 -06:00
Gregory Nutt
34a994b0f6 Correct a logic problem the prevented dumping the IDLE thread's stack on an assertion 2016-12-16 13:21:01 -06:00
Gregory Nutt
6337fadd8c Missing escape character on CR of CR-LF expansion. 2016-12-16 10:49:42 -06:00
Gregory Nutt
935e49f5bb Update some comments 2016-12-16 09:38:08 -06:00
Gregory Nutt
f1a5b91cd8 Use r6, not r2 when passing paramters with call4 2016-12-16 09:21:44 -06:00
Gregory Nutt
41cf32a20e Fix windowspill register handling + Use r6, not r2 when passing paramters with call4 2016-12-16 09:20:36 -06:00
Gregory Nutt
aa5a8b0ca2 Xtensa: Make sure that all C callable assembly functions includes ENTRY prologue and RET epilogue. 2016-12-15 14:02:19 -06:00
Gregory Nutt
c56268b416 Fix missing CALL0 ABI condition. 2016-12-15 11:06:41 -06:00
Gregory Nutt
ea9e6c48e4 Cosmetic update to comments. 2016-12-15 10:43:34 -06:00
Gregory Nutt
10b9a10d2f Xtensa ESP32: Fix several build-related issues associated with vector section 2016-12-15 10:08:26 -06:00
Gregory Nutt
b5e979d58f ESP32: Fix a couple of bugs associated with handling of CPU interrupts. 2016-12-14 13:31:44 -06:00
Gregory Nutt
4052ec2d90 Add missing ENTRY() and RET() macros in C callable assembly language. At one time I though the that the ESP32 support the CALL0 ABI. I was mistaken so there may be a few more like this. 2016-12-14 12:14:51 -06:00
Gregory Nutt
730ca4ce41 Fix missing semicolons in DEBUGASSERT statements 2016-12-14 09:06:09 -06:00
Angus Gratton
dd5e47a418 ESP32 core v2: Two changes (1) flushes the UART TX buffer in the esp32 serial shutdown routine. The ROM bootloader does not flush the FIFO before handing over to user code, so some of this output is not currently seen when the UART is reconfigured in early stages of startup. And changes the openocd config file's default flash voltage from 1.8V to 3.3V. This is not necessary right now, but may save some hard-to-debug moments down the track (3.3V-only flash running at 1.8V often half-works and does weird things...) 2016-12-14 08:15:03 -06:00
Gregory Nutt
a7b688e87b sched notes: Add additional note to see if/when CPU is started in SMP mode. 2016-12-07 09:08:20 -06:00
Gregory Nutt
d65be718c2 sched_note: Extend OS instrumentation to include some SMP events. 2016-11-27 17:14:57 -06:00
Gregory Nutt
e3fe320e08 SMP: Add support for linking spinlocks into a special, non-cached memory region. 2016-11-26 08:47:03 -06:00
Gregory Nutt
6a875bcb61 Xtensa: Add EXPERIMENTAL hooks to support lazy co-processor state restore in the future. 2016-11-16 06:48:13 -06:00
Gregory Nutt
c84db68103 Xtensa ESP32: Fix some compilation errors that snuck with some of the last changes 2016-11-14 13:29:08 -06:00
Gregory Nutt
ac1bb127b6 Correct some C++ style comments. 2016-11-08 08:51:03 -06:00
Gregory Nutt
b6d6b774e9 Xtensa: In this model, co-processor state restore must enable co-processors in CPENABLE. 2016-11-08 08:23:52 -06:00
Gregory Nutt
b0dffdc2ca Fix a number of header files with mismatched 'extern C {' and '}' 2016-11-05 07:25:05 -06:00
Gregory Nutt
5cfb83ec81 ESP32: File repeated in Make.defs 2016-11-03 17:47:09 -06:00
Gregory Nutt
0a5b4f684a arch: Disable priority inheritance on all semaphores used for signaling in the rest of the MCU drivers 2016-11-03 17:38:26 -06:00
Gregory Nutt
54d7656f18 Update some comments 2016-11-03 07:04:03 -06:00
Gregory Nutt
cfcc7edded Xtensa/ESP32: Add window spill logic; Add C++ support to linker script 2016-10-31 17:51:48 -06:00
Gregory Nutt
4d0b0e44f1 Xtensa/ESP32: Add up_cpu_idlestack() and fix some compile issues. 2016-10-31 14:56:48 -06:00
Gregory Nutt
28d1478480 Xtensa/ESP32: Add CPU1 startup logic 2016-10-31 13:15:15 -06:00
Gregory Nutt
a8e3f79494 Xtensa/ESP32: Add User Exception handler 2016-10-31 12:04:52 -06:00
Gregory Nutt
a787a99071 ESP32: Add inter-cpu interrupts 2016-10-31 08:29:28 -06:00
Gregory Nutt
63d5ab5b67 Add logic to attach inter-CPU interrupts. Fix some compilation errors. 2016-10-30 16:15:04 -06:00
Gregory Nutt
6ff833e56e Forgot to add a file in the last commit 2016-10-30 15:40:42 -06:00
Gregory Nutt
85ed3dae9a Update some compilation issues 2016-10-30 15:38:51 -06:00
Gregory Nutt
a4c3fef0b7 Xtensa: Add more exception vectors. All just cause a PANIC now. 2016-10-30 12:20:11 -06:00
Gregory Nutt
fdede8099b Xtensa/ESP32: Add Level1 handler, panic handler, remove EXECHOOKS. 2016-10-30 10:57:57 -06:00
Gregory Nutt
eaa5968a22 Xtensa: Convert some CALL0 C calls to be compatible with Window ABI 2016-10-30 08:46:35 -06:00
Gregory Nutt
261e0edc61 Xtensa: Adapt co-processor state save/restore functions so that they are call-able from C with Windows ABI. 2016-10-30 08:35:09 -06:00
Gregory Nutt
c0da94fc3e Xtensa: Remove xtensa_macros.h; duplicates xtensa_abi.h 2016-10-30 07:45:28 -06:00
Gregory Nutt
8c96221093 Xtensa: Replace CONFIG_XTENSA_CALL0_ABI with compiler defined __XTENSA_CALL0_ABI__ 2016-10-30 07:37:51 -06:00
Gregory Nutt
dc82fa81b8 Xtensa: Remove XTENSA_EXTRA_SA_SIZE. It is not used. 2016-10-30 07:09:24 -06:00
Gregory Nutt
4997ec7a1e ESP32 Core V2: Add an SMP configuration to support development (not yet usable). 2016-10-29 14:56:07 -06:00
Gregory Nutt
c993a0267c Xtensa: Add Window vector 2016-10-29 12:30:24 -06:00
Gregory Nutt
804f9c5de7 Xtensa: Rename some files. 2016-10-29 11:24:02 -06:00
Gregory Nutt
d346f25aae Xtensa/ESP32: Fix some compile issues related to new co-processor logic 2016-10-29 10:27:46 -06:00
Gregory Nutt
4943b09ffa Xtensa: Remove co-processor ownership array. I think that this is not needed (but I might be wrong). 2016-10-29 09:50:51 -06:00
Gregory Nutt
ccf5b4e357 Xtensa: Cleanup of co-processor logic; remove some unnecessary things. 2016-10-29 09:36:33 -06:00
Gregory Nutt
2fa8b9ba34 Xtensa ESP32: Co-processor state is code complete but uncompiled and untested. 2016-10-28 13:03:25 -06:00
Gregory Nutt
9345c6f4db Xtensa: More co-processor save logic. Still not complete. 2016-10-28 11:56:35 -06:00
Gregory Nutt
a90d0bbf2e ESP32: A little more co-processor logic. Still not complete. 2016-10-28 11:19:23 -06:00
Gregory Nutt
b4b26285f1 ESP32: Add tie-asm.h 2016-10-28 10:53:14 -06:00