sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
33,834 Commits 1 Branch 0 Tags 291 MiB
81bef6cccf
Commit Graph

512 Commits

Author SHA1 Message Date
David Sidrane
979e671cf0 kinetis:k20 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:00 -10:00
Gregory Nutt
1cd3b3f590 Fix errors introduced into Kinetis serial when I unsuccessfully tried to correct coding standard violations. Folks, things will be better for everyone if you just follow that standard. 2017-05-05 14:47:11 -06:00
Gregory Nutt
0e49db7626 Add a blank line. 2017-05-05 09:35:47 -06:00
David Sidrane
f29981e473 kinetis:Added HW flow control and termios 2017-05-05 07:33:15 -06:00
David Sidrane
b6a8db1b39 Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock configuration 2017-05-05 07:18:39 -06:00
David Sidrane
29ef635e89 Kinetis:Add OSC_DIV to the kinetis_osc header 2017-05-05 07:16:11 -06:00
David Sidrane
f73e2aab8d Kinetis:Fixed CLKSRC Bit Names 2017-05-05 07:14:00 -06:00
David Sidrane
2171523f50 Kinetis:Add TPM to K66 chip 2017-05-05 07:12:52 -06:00
Gregory Nutt
f175af3cd3 More missed enum spi_dev_e forward references. 2017-04-29 08:29:01 -06:00
Sebastien Lorquet
c56c6f7ccc ARM arch changes 2017-04-28 18:23:29 +02:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
David Sidrane
a0c4254168 Kinetis:Fixed warning 2017-04-18 10:04:54 -10:00
Gregory Nutt
78bc1aa6bc Argument of network device IOCTL should be unsigned long, just as will all other IOCTL methods. 2017-04-15 09:33:27 -06:00
Jussi Kivilinna
e3b3e57e56 RTC: add interface for check if RTC time has been set 
New interface allows checking if RTC time has been set.  This allows to application to detect if RTC has valid time (after
reset) or should application attempt to get real time by other means (for example, by launching ntpclient or GPS).
 2017-04-06 09:53:11 -06:00
Gregory Nutt
240d1e9b3b Update some comments 2017-03-14 11:39:10 -06:00
Gregory Nutt
c97581e99b Update some comments 2017-03-14 11:16:35 -06:00
David Cabecinhas
86400a252d ARM: Fix off-by-one interrupt stack allocation in 8-byte aligned architectures 2017-03-14 20:01:45 +08:00
David Sidrane
2700fd9e81 Kinetis:Allow Board to add Pullups on SDHC lines 2017-03-09 05:30:02 -10:00
David Sidrane
45ccf0cb79 Merged in david_s5/nuttx/upstream_kinetis (pull request #243) 
Ensure interrups are back on BEFORE running code dependant on clock_systimer

Approved-by: Gregory Nutt
 2017-03-08 22:24:28 +00:00
David Sidrane
5158af0da6 Ensure interrups are back in BEFORE running code dependant on clock_systimer 2017-03-08 11:46:00 -10:00
David Sidrane
ab2337fa4b Merged in david_s5/nuttx/upstream_kinetis (pull request #242) 
Kinetis:Fixed GPIO _PIN_OUTPUT_LOWDRIVE swapped with _PIN_OUTPUT_OPENDRAIN

Approved-by: Gregory Nutt
 2017-03-08 19:30:31 +00:00
David Sidrane
7ad9c7c6e8 Kinetis:Fixed GPIO _PIN_OUTPUT_LOWDRIVE swapped with _PIN_OUTPUT_OPENDRAIN 2017-03-08 09:13:02 -10:00
David Sidrane
940fefeb8a Fixed #if defined 2017-03-06 19:28:27 +00:00
Gregory Nutt
464a3cf27c Kinetis: Eliminate warning when USE_EARLYSERIALINIT is not defined 2017-03-05 14:06:20 -06:00
Gregory Nutt
210896438c Kinetis PIN IRQ needs errno.h 2017-03-03 15:30:16 -06:00
Gregory Nutt
9a33f41180 Kinetis PINIRQ: Improper type for return value. 2017-03-03 15:09:44 -06:00
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
34a2839244 Kinetis GPIO: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 11:33:03 -06:00
David Sidrane
ead561d684 Kinetis:kinetis_lpserial.c irq fix typeo 2017-02-28 23:12:56 +00:00
Gregory Nutt
dc93340a01 Convert more drivers to use new interrupt argument structure. 2017-02-28 09:29:09 -06:00
Gregory Nutt
f700e7b241 Merge remote-tracking branch 'origin/master' into irqattach 2017-02-27 18:58:34 -06:00
David Sidrane
d4963c2580 Merged in david_s5/nuttx/upstream_upstream_kinetis_usb (pull request #226) 
kinetis usb clean up

Approved-by: Gregory Nutt
 2017-02-28 00:54:04 +00:00
David Sidrane
0b637ddfb3 Kinetis:Define uart and lpuart versions of [early]serialinit 
Add serial init to centralize UART/LPUART management
   Use kinetis_ not up_ where arch specific
   Defined kinetis_[lp]uart_[early]serialinit to facilitate
    bring up both UARTs and LPUARTs as devices and a console

   Support ordering and merging of serial devices names.
 2017-02-27 14:27:31 -10:00
David Sidrane
d0c58fffb3 Kinetis:Refactor clocking in kinetis_usbdev 
1) Removed SIM_CLKDIV2[USBFRAC, USBDIV] setting as it is now
     done in kinetis_clockconfig
  2) Use BOARD_USB_CLKSRC to select the clock source to the
     USB block
  3) Removed warning
  4) Removed CONFIG_TEENSY_3X_OVERCLOCK from the driver as
     the board.h will now provide BOARD_SIM_CLKDIV2_USBDIV
     and BOARD_SIM_CLKDIV2_USBFRAC to the kinetis_clockconfig
 2017-02-27 13:13:24 -10:00
David Sidrane
1c518b223d Kinetis:Add the configuring SIM_CLKDIV2[USBFRAC, USBDIV] in kinetis_clockconfig 
If a board.h provides BOARD_SIM_CLKDIV2_FREQ it will configure the
  SIM_CLKDIV2 based on the additional provided
  BOARD_SIM_CLKDIV2_USBFRAC and BOARD_SIM_CLKDIV2_USBDIV

  The reason for doing this globaly is that the output the
  SIM_CLKDIV2 divisor may be also used for other IP blocks in
  future configurations (as is done for SIM_CLKDIV3)
 2017-02-27 13:06:01 -10:00
David Sidrane
b9dcedf289 Kinetis:Fixed unused warning 2017-02-27 11:22:49 -10:00
David Sidrane
4bdf732fc7 Kinetis:Fixed kinetis_uartreset call in kinetis_lpserial.c 2017-02-27 11:22:49 -10:00
David Sidrane
3ae4183971 Kinetis:Fixed C&P of stm32 on kinetis_fpuconfig 2017-02-27 09:12:39 -10:00
David Sidrane
ddb00217be Kinetis:Fixed up_rxint - did not disable the RX interuppts 
There was an OR where and AND NOT was needed.
 2017-02-27 07:19:19 -10:00
Gregory Nutt
221c94e568 Fix typo from a previouis commit 2017-02-27 08:57:21 -06:00
Gregory Nutt
4cd31be19d Convert some serial drivers to use use irq_attach. 2017-02-27 08:55:21 -06:00
Gregory Nutt
2321560690 More missing argument paramters in interrupt handlers. 2017-02-27 08:06:07 -06:00
Gregory Nutt
70532f6548 Kinetis: More needed in last pinirq change. 2017-02-27 07:24:57 -06:00
Gregory Nutt
6e2ee2b07f Kinetis: GPIO interrupt handling needs handler argument. 2017-02-27 07:20:21 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
bca0adec2b Update comments in file headers. 2017-02-26 14:40:57 -06:00
Gregory Nutt
2238912507 Fix some backward conditional compilation 2017-02-25 18:32:58 -06:00
Gregory Nutt
abfb070ee1 Kinetis: Try to make UART/LPUART definitions sane. 2017-02-25 17:48:05 -06:00
Gregory Nutt
27cac7f083 Fix error in last commit: defined, not define in conditional logic. 2017-02-25 16:44:27 -06:00
Gregory Nutt
1e1714b061 Kinetis: Resolve issue with duplicate definitions of up_putc. Addition conditional logic to pick just one. 2017-02-25 16:36:47 -06:00
Gregory Nutt
ee2f71ad3e Kinetis USBDEV: Eliminate compilation error introduced by last SIM changes. 2017-02-25 13:26:53 -06:00
Gregory Nutt
48bc77ee6b Update some comments. 2017-02-25 12:40:30 -06:00
Gregory Nutt
04ea69c32f Kinetis: Fix some comple errors and warnings that came in with the last PR 2017-02-25 11:52:31 -06:00
Gregory Nutt
90e63ba18e Purely cosmetic changes from review of last PR. 2017-02-25 11:43:05 -06:00
David Sidrane
38df949adc Merged in david_s5/nuttx/upstream_kinetis (pull request #221) 
Kinetis:Add LPUART

Approved-by: Gregory Nutt
 2017-02-25 17:23:04 +00:00
David Sidrane
df01e343a7 Kinetis:Add LPUART serail device driver 2017-02-25 07:06:04 -10:00
David Sidrane
0cbc03255c Kinetis:Add LPUART and Clock configuartaion to freedom-k66f board 
Pin out LPUART0 for testing
   Define BOARD_SOPT2_PLLFLLSEL ti select MCGPLLCLK
   Define BOARD_SIM_CLKDIV3_FREQ etal to provide BOARD_LPUART0_FREQ
 2017-02-25 07:05:34 -10:00
David Sidrane
b553d34a68 Kinetis:Added configurable 1|2 stop bits 
HAVE_SERIAL_CONSOLE -> HAVE_UART_CONSOLE to bew consistent with
  HAVE_LPUART_CONSOLE naming
 2017-02-25 07:02:56 -10:00
David Sidrane
dd218ffa8c Kinetis:Extend clockconfig to support SOPT2_PLLFLLSEL and SIM_CLKDIV3 
A board.h file can now specify the:
   1) BOARD_SOPT2_PLLFLLSEL to select the output of the SIM_SOPT2 MUX
     from:
       MCGFLLCLK
       MCGPLLCLK
       USB1PFD
       IRC48MHZ

    2) If it defines BOARD_SIM_CLKDIV3_FREQ then it must define
    BOARD_SIM_CLKDIV3_PLLFLLFRAC and BOARD_SIM_CLKDIV3_PLLFLLDIV
    which wil be used to cpnfigure SIM_CLKDIV3 [PLLFLLFRAC, PLLFLLDIV]
 2017-02-25 07:02:56 -10:00
David Sidrane
86c9f97f78 Kinetis: Add LPUART as lowlevel console 2017-02-25 07:02:56 -10:00
David Sidrane
29ab603a66 Kinetis:Add LPUART for use with K66 
Add LPUART made UART5 an uption as the K66 does not have UART5
 2017-02-25 07:02:56 -10:00
David Sidrane
f6fe9beeb3 Kinetis:Add LPUART to config 2017-02-25 07:02:56 -10:00
David Sidrane
b280aef9c0 Kinetis:Add LPUART register definitions 2017-02-25 07:02:38 -10:00
David Sidrane
9061a3fb64 Kinetis: UART add UART_BDH_SBNS definition 2017-02-25 07:02:38 -10:00
Marc Rechte
579360e77d Merge branch 'master' of https://bitbucket.org/mrechte/nuttx-twrk64 2017-02-24 08:02:08 +01:00
Marc Rechte
c734a6283c kinetis_enet.c add #define for number of loops for auto negotiation to complete 2017-02-24 08:00:11 +01:00
David Sidrane
a43554decd Kinetis:SIM add paramiterized SIM_CLKDIVx_xxFRAC|DIV macros 
The makes for cleaner board definitions like:

   Divider output clock = Divider input clock * ((PLLFLLFRAC+1)/(PLLFLLDIV+1))
       SIM_CLKDIV3_FREQ = BOARD_SOPT2_FREQ × [ (PLLFLLFRAC+1) / (PLLFLLDIV+1)]
                 90 Mhz = 180 Mhz X [(0 + 1) / (1 + 1)]
    #define BOARD_SIM_CLKDIV3_PLLFLLFRAC  1
    #define BOARD_SIM_CLKDIV3_PLLFLLDIV   2
    #define BOARD_SIM_CLKDIV3_FREQ        (BOARD_SOPT2_FREQ * (BOARD_SIM_CLKDIV3_PLLFLLFRAC / BOARD_SIM_CLKDIV3_PLLFLLDIV))
 2017-02-23 19:27:55 -10:00
David Sidrane
e1278c0cb9 Kinetis:Fix typo in comment 2017-02-23 19:25:53 -10:00
David Sidrane
41e3d9f174 Kinetis:Refactor you use SIM_SOPT2_PLLFLLSEL, added warning 
The warning has been added because: SIM_SOPT2_PLLFLLSEL
  is a clock selection that may feed many clock subsystem:
   USB, TPM, SDHCSRC, LPUARTSRC. Therefore, there needs to
  be a global board level setting to select  the source for
  SIM_SOPT2_PLLFLLSEL and then  derive all the  sub selections
  and proper fractions/divisors for each modules clock.
 2017-02-22 10:42:52 -10:00
David Sidrane
12c24f2644 Kinetis:kinetis_clockconfig uses the correct ACKISO 
ACKISO is located in the PMC_REGSC on the majority
   of the Kinetis SoCs. With the exception of the
   MK40DXxxxZVLQ10 where ACKISO is located in LLWU_CS
 2017-02-22 10:42:52 -10:00
David Sidrane
1324b8c00a Kinetis:Resolves issues where Freescale moved ACKISO 
ACKISO is located in the PMC_REGSC on the majority
  of the Kinetis SoCs. With the exception of the
  MK40DXxxxZVLQ10 where ACKISO is located in LLWU_CS
 2017-02-22 10:42:52 -10:00
David Sidrane
a4b985f865 Kinetis:PMC defines are based on PMC feature configuration 2017-02-22 10:42:52 -10:00
David Sidrane
381ffa3083 Kinetis:SIM defines are based on SIM feature configuration 2017-02-22 10:42:52 -10:00
Gregory Nutt
bb059432ea Move local variables to top of function for compliance with coding standard. 2017-02-20 17:54:04 -06:00
Gregory Nutt
0fc226dd53 Changes from review of last PR 2017-02-19 14:58:37 -06:00
Marc Rechté
1838171d43 Add twr-k64f120m config and fix some ENET related problems 2017-02-19 21:20:56 +01:00
Gregory Nutt
a49b349614 C library: Add swab() 2017-02-16 14:42:27 -06:00
Gregory Nutt
3b351615be Kinetis K66: Change necessary for correct build. 2017-02-16 11:33:36 -06:00
Gregory Nutt
c3bfccf293 Kinetis PWM: Purely cosmetic changes from review. 2017-02-15 17:54:55 -06:00
David Sidrane
c83af148b1 Kinetis:Add FTM3 to PWM 2017-02-15 13:42:36 -10:00
David Sidrane
a95a6c43d3 Kinetis Support RMII clock source select 
This defined the RMII clock source select bits and allows
  the selection to be made via Kconfig
 2017-02-15 13:42:36 -10:00
David Sidrane
3423a4ecc2 Kinetis: Add comment the Freedom-K66F uses KSZ8081 PHY 2017-02-14 09:15:23 -10:00
David Sidrane
35fc713931 Kinetis K64 and K66 share mpu files 2017-02-14 09:15:23 -10:00
David Sidrane
84b206bf7e Kinetis K66 FMC 
Added K66 FMC register definition
 2017-02-13 14:35:52 -10:00
David Sidrane
7d80db5919 Kinetis K66 Pin Mux 2017-02-13 14:35:51 -10:00
David Sidrane
e28781ebeb Include K66 memory map 2017-02-13 14:35:51 -10:00
David Sidrane
6597e46ce7 Define Alternate addresses for IP blocks in both AIPS0 & AIPS1 
Added ALT version of RNGA, FTM2, DAC0 as a facility to later
   define secondary access via AIPS1 to these peripherals
 2017-02-13 14:35:51 -10:00
David Sidrane
bd7d7edcf8 Kinetis: Updated comment in clockconfig 2017-02-13 13:24:47 -10:00
David Sidrane
3840c802d1 Kinetis SPI and I2C are 0 based 
The K whole family line has max 4 or each. But the supported
  parts have the maximums listed below:

    K46 and K66    3 SPI SPI0-SPI2
    K46 and K66    4 I2C I2C0-I2C3
 2017-02-13 13:24:47 -10:00
David Sidrane
ddd1f8c507 Kinetis SDHC - Enable clock after selected 2017-02-13 13:24:47 -10:00
Marc Rechté
d501ffc563 Kinetis SDHC driver fixes. 2017-02-09 11:28:30 -06:00
Gregory Nutt
e803e2c3f4 Costmetic changes from review of last PR. 2017-02-07 17:16:56 -06:00
David Sidrane
a4ea49aaa2 Better granualarity and erro checking of the board's MCG settings 
Allow for complete MCG_C2 definition from the boart.h file
  Moved #ifdef out of code by setting default values for
  Allow for individule bit setting in MCG_C2 for
    BOARD_EXTCLOCK_MCG_C2
    BOARD_MCG_C2_FCFTRIM
    BOARD_MCG_C2_LOCRE0
  Added range and sanity checking
 2017-02-07 12:38:28 -10:00
David Sidrane
87f759172a Support the Indexed name LOCK->LOCK0 2017-02-07 12:38:28 -10:00
David Sidrane
6022c62229 MCG defines are based on the MCG feature configuration 
We define the bits as a common set of names. This means that
  an index may be added to a name i.e. LOCK is LOCK0 as that is
  the superset name.
 2017-02-07 12:38:28 -10:00
David Sidrane
5bfd2fedc6 Add K66 memory map 2017-02-07 12:38:28 -10:00
David Sidrane
97ae289f99 Add Kinetis K66 to Kinetis Kconfig 2017-02-07 12:38:28 -10:00
David Sidrane
eb955c9f15 Removed ws at EOL 2017-02-07 12:38:28 -10:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
9395704192 Kinetis, not Kinetics. 2017-02-07 08:20:52 -06:00
Gregory Nutt
54ce3817a5 SDIO interface: Handle all possible DMA combinations in all SDIO drivers. 2017-02-07 07:15:29 -06:00
Marc Rechté
b459fd1529 Updates to Kinetis SDHC driver 2017-02-06 07:43:05 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
2a4791f4ee Removed dmasupported() method from the SDIO interface. That is now a bit in the cpapability set. 2017-01-31 09:51:15 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
4a8c6a6d2d ELF: Move ARMv6-M, ARMv7-M, and legacy ARM versions of ELF relocation logic to libc/machine 2017-01-21 15:24:25 -06:00
Gregory Nutt
be5ba90d4f Move optimized ARM memcpy functions from arch/arm/src/ to libc/machine/. This is necessary for the PROTECTED and KERNEL build modes. Otherwise, memcpy() will be built in to kernel space and not accessible to applications. 2017-01-20 10:53:46 -06:00
Gregory Nutt
3c4684ef5f Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename. 2017-01-20 09:30:07 -06:00
Neil Hancock
2ece27f435 Kinetis: Add support for K64/K66 RTC lower half driver 2017-01-17 15:34:44 -06:00
Maciej Skrzypek
0c430e1d0f Kinetis MCG: Wrong FRDIV set in MCG_C1 2017-01-13 08:19:05 -06:00
Maciej Skrzypek
b6b30bcc7d Kinetis: Need to set HAVE_UART_DEVICE when UART4 is selected 2017-01-13 08:16:31 -06:00
Maciej Skrzypek
98bdd12521 Kinetis Serial: Fixed compile error when UART5 is selected 2017-01-13 08:14:41 -06:00
Maciej Skrzypek
4becebe59f Kinetis: Fixed wrong MCG VDIV calculation on new NXP K60 2017-01-13 08:13:21 -06:00
Maciej Skrzypek
bc1826da63 Kinetis: Added CHIP_MK60FN1M0VLQ12 chip 2017-01-13 08:10:03 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Gregory Nutt
0804286ad3 arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS. 2016-11-19 09:20:01 -06:00
Gregory Nutt
bb6bfa633e arch: Disable priority inheritance on all semaphores used for signaling in all SD card drivers 2016-11-03 15:13:27 -06:00
Gregory Nutt
e1cd9febbf arch: Disable priority inheritance on all semaphores used for signaling in all I2C/TWI drivers 2016-11-03 14:23:42 -06:00
David Sidrane
c3543cf402 Kinetis:BugFix:i2c driver offset swapped for value in kinetis_i2c_putreg 2016-10-18 12:00:01 -10:00
David Sidrane
b29b2874fe Kinetis Allow CONFIG_ARMV7M_CMNVECTOR, CONFIG_STACK_COLORATION, CONFIG_ARCH_FPU 2016-10-18 12:00:01 -10:00
David Sidrane
bce382da52 Kinetis Support ARMV7 Common Vector and FPU 2016-10-18 12:00:01 -10:00
David Sidrane
4de46c848d Broke out DMA to use the modern Nuttx chip inclusion - still STUBS 2016-10-18 12:00:01 -10:00
David Sidrane
42ac6ecebd Kinetis broke out SPI to kinetis/kinetis_spi.h 2016-10-18 12:00:01 -10:00
David Sidrane
70d5c7753e Kinetis - Added missing headers 2016-10-18 12:00:01 -10:00
Gregory Nutt
5b46ce4889 Cosmetic changes from review of last PR 2016-10-14 17:39:21 -06:00
Gregory Nutt
f2ebb6d2a0 Merged in neilh20/anuttx/pr_K64_uid (pull request #147) 
Add Kinetis freedom-k64f uid
 2016-10-14 23:29:19 +00:00
neilh10
6dca9a4390 Add UID Unique ID 2016-10-13 19:50:35 -07:00
neilh10
64b020f1a8 Add UID Unique ID 2016-10-13 19:42:39 -07:00
Gregory Nutt
0bc19a63bb Merged in david_s5/nuttx-5/david_s5/kinetish-edited-online-with-bitbucket-1476115086140 (pull request #144) 
kinetis.h edited online with Bitbucket
 2016-10-10 10:04:04 -06:00
David Sidrane
0476c43748 kinetis.h edited online with Bitbucket 2016-10-10 15:58:21 +00:00
David Sidrane
4703a23171 kinetis.h edited online with Bitbucket 2016-10-10 15:56:02 +00:00
Gregory Nutt
e57891b41f Kinetis I2C: Review and extend I2C register definitions for K40 and K60 2016-08-16 12:17:23 -06:00
Gregory Nutt
a337494221 Kinetis I2C: Remove literal hex register values. Replace with symbolic definitions from kinetis_i2c.h 2016-08-16 11:44:04 -06:00
Gregory Nutt
7f4488dc80 Review I2C register definitions and add support for the K64 2016-08-16 10:18:52 -06:00
Gregory Nutt
a3b061e54f Kinetis: Add support for I2C2 2016-08-16 10:02:28 -06:00
Gregory Nutt
be83e73957 Kinetis I2C: Add comments, DEBUGASSERTions, and some I2C debug output. 2016-08-16 08:42:30 -06:00
Gregory Nutt
32c1189f51 Re-order some fields so that the structure packs better and so is smaller. 2016-08-16 08:20:55 -06:00
Gregory Nutt
f40bb14495 Kinetis: Add support for I2C1 2016-08-16 07:21:03 -06:00
Gregory Nutt
f84780f36e Changes from review of PR 114 2016-08-14 13:38:47 -06:00
Gregory Nutt
2b32869b49 Merged in v01d/nuttx/kinetis-i2c-norestart (pull request #114) 
support NORESTART on kinetis i2c
 2016-08-14 13:27:39 -06:00
v01d
239c56f3b9 support NORESTART 2016-08-14 16:25:18 -03:00
Gregory Nutt
014b8268cc Minor stylistic corrections 2016-08-14 10:14:28 -06:00
Gregory Nutt
45e71a140a Fix some alignment and long line issues 2016-08-13 18:04:09 -06:00
Gregory Nutt
3023724cf2 Changes from review of PR 113 2016-08-13 17:32:35 -06:00
v01d
5a97def131 kinetis k20 i2c fixed 2016-08-13 18:48:45 -03:00
v01d
f715e9b787 RTC working, I2C in progress 2016-08-09 14:01:27 -03:00
v01d
d483f7939f I2C0 support for kinetis/teensy-3.x (to be tested) 2016-08-06 22:23:59 -03:00
Gregory Nutt
59f626313d Changes from review of last PR 2016-07-25 15:16:51 -06:00
Gregory Nutt
250b9d5597 Merged in JordanMacIntyre/nuttx/PWM_driver (pull request #106) 
Pwm_driver
 2016-07-25 14:59:45 -06:00