sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,510 Commits 1 Branch 0 Tags 291 MiB
9023221f2b
Commit Graph

3918 Commits

Author SHA1 Message Date
Gregory Nutt
43b214addd SAMA4D5 HSMCI: Set burst size to 1, sample DMA registers on timeout, and don't return from transfer until BOTH the HSMCI transfer and DMA complete 2014-07-21 13:24:55 -06:00
Gregory Nutt
3b24da2d7c XDMAC register sampling missed CIM register; Should not set SWREQ bit in DMA setup 2014-07-21 13:23:36 -06:00
Gregory Nutt
e202c8e9b2 Fix a commented out assertion 2014-07-20 17:06:55 -06:00
Gregory Nutt
e8c030a833 Fix typos in comments 2014-07-20 13:09:47 -06:00
Gregory Nutt
7fa1eec246 SAMA5D4-EK: PIO Schmitt trigger logic backward 2014-07-20 13:04:30 -06:00
Gregory Nutt
f4bcb730d2 WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled 2014-07-20 09:17:36 -06:00
Gregory Nutt
54d441b5c9 SAMA5D ADC: Fix some typos in conditional compilation 2014-07-19 13:56:48 -06:00
Gregory Nutt
6ece3d8378 SAMA5 SCK: The SAMA5D3 does things a little differently 2014-07-19 13:55:53 -06:00
Gregory Nutt
d8f85d1caa SAMA5 PCK: Add support for the slow clock as the PCK clock source 2014-07-19 13:55:08 -06:00
Gregory Nutt
c74531e014 SAMA5: Update slow clock logic. Things work a little differently on the SAMA5D3 2014-07-19 13:25:59 -06:00
Gregory Nutt
bad3ad58cb SAMA5: Add slow clock support 2014-07-19 13:07:55 -06:00
Gregory Nutt
6d9f9e37bf SAMA5D4-EK: Add WM8904 initialization logic 2014-07-19 11:58:53 -06:00
Gregory Nutt
3a6ea3642f SAMA5 LCDC: Back out the delay kludge. Increase the LCDC input clock from MCK to 2*MCK was sufficient for all timing instbility problems 2014-07-12 11:24:14 -06:00
Gregory Nutt
8d1feb7a54 SAMA5D4-EK LCDC: Change source clock to 2*Mck seems to solve stability issues 2014-07-12 09:45:05 -06:00
Gregory Nutt
253110bbf1 SAMA5D4-EK LCDC: Adding a delay after enabling the LCD solves lots of start-up timing issues 2014-07-12 08:05:22 -06:00
Gregory Nutt
3384906cdd Lpc17xx Ethernet: Comment out an assertion that is reported to first inappropriately. From Max 2014-07-11 12:25:11 -06:00
Gregory Nutt
95df6bd3de SAMA5D4-EK LCD: Actual hardware with appears to be RGB888 2014-07-10 12:23:41 -06:00
Gregory Nutt
89024f3698 SAMA5D4-EK: LCDC works (with a few color problems) 2014-07-10 12:03:10 -06:00
Gregory Nutt
60e64ae93d Don't have to set SDA high initially in I2C reset because that is done by the pin configuration 2014-07-09 17:17:32 -06:00
Gregory Nutt
981c1ebf55 SAMA5 PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a a vanilla input first so that final pin configuration is more read-able (i.e., easier to debug) 2014-07-09 17:16:43 -06:00
Gregory Nutt
27be48a1ba SAMA5 I2C Reset: More changes... still does not work right 2014-07-09 15:09:06 -06:00
Gregory Nutt
c2ca4be4f5 SAMA5 TWI: Some restructured needed by up_i2creset. Also timeout needs to vary with the size of the transfer and if debug is on or not 2014-07-09 13:39:10 -06:00
Gregory Nutt
84056291e8 Use sam_pio_forceclk() so that we can read the current state of an open-drain output in the TWI reset logic. 2014-07-09 11:31:21 -06:00
Gregory Nutt
a966e4f30b Add a new interface sam_pio_forceclk() that can be used to force PIO clocking on. I am afraid I was too conservative with PIO clocking in the initial design; this is the price 2014-07-09 11:26:07 -06:00
Gregory Nutt
e9362128bd SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
a7ec464d48 SAMA5D4 LCDC: Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has no hardware cursor 2014-07-08 12:45:16 -06:00
Gregory Nutt
e76f10ceac SAMA5D3/4 HEAP: Add a configuration option to reserve DRAM for a framebuffer when executing out of DRAM. 2014-07-08 12:43:38 -06:00
Gregory Nutt
befcb1c961 Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
ca43955541 SAMA5D3/4: Fix two issues associated with PIO interrupts 2014-07-07 14:16:29 -06:00
Gregory Nutt
95bbdb675b SAMA5D3/4 I2C: Test for read or write operation was reversed. How could this have worked before? 2014-07-07 09:54:43 -06:00
Gregory Nutt
0d14befb88 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
4afc23d16d maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
c5fc24e110 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
858587d633 AMA5 OHCI: Pointers to allocated port values were not being nullified after being deallocated. This caused some assertions when debug was enabled 2014-07-04 08:17:14 -06:00
Gregory Nutt
1657e6296b Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
Gregory Nutt
71f6838129 Correct authorship on a few files 2014-07-03 18:28:26 -06:00
Gregory Nutt
9f5418e5d3 NET: More renaming 2014-07-03 17:53:16 -06:00
Gregory Nutt
44988c6ca6 Rename apps/examples/uip to apps/examples/webserver 2014-07-03 17:31:17 -06:00
Gregory Nutt
009eee331f SAMA5 OHCI: Fix an error in a DEBUGASSERT statement. Caused assertion to fire inappropriately when a low- or full-speed device is removed and CONFIG_DEBUG=y 2014-07-03 13:06:28 -06:00
Gregory Nutt
a5538e3431 SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why. 2014-07-03 12:28:11 -06:00
Gregory Nutt
dd4caf172f CCM PROCFS: Changed the configuration a bit. I am still not happy about the coupling between procfs, mtd, and now STM32 2014-07-03 08:50:24 -06:00
Gregory Nutt
64cd7a81ed Add STM32 CCM heep procfs 2014-07-03 08:18:24 -06:00
Gregory Nutt
edb5f312ca Move cypto debug definitions to debug.h with other susbsystem-level debug 2014-07-03 07:58:43 -06:00
Gregory Nutt
bb3dcccd98 Beginning of a crypto/ subsystem from Max Neklyudov 2014-07-03 07:42:44 -06:00
Gregory Nutt
6bfa7c1afa SAM4 AES driver from Max Neklyudov 2014-07-03 07:26:44 -06:00
Gregory Nutt
00ced07128 SAM Ethernet: Eliminate a warning 2014-07-02 17:35:41 -06:00
Gregory Nutt
a7933cc22b SAMA5D4-EK: NSH should run at 528MHz 2014-07-02 15:31:52 -06:00
Gregory Nutt
ee2725c146 SAMA5D4-EK: NSH configuration now has TWI0 enabled and supports the I2C tool 2014-07-02 13:51:57 -06:00
Gregory Nutt
1c198f6a86 SAMA5D4 EMAC: Add a kludge to work around a suspected hardware issue 2014-07-02 12:17:01 -06:00
Gregory Nutt
ca353a2644 SAM3/4 and SAMA5 Ethernet: Fix an error in the function that determines the number of free TX descriptors 2014-07-02 10:40:11 -06:00
Gregory Nutt
a2741940f9 SAMA54D-EK: Don't disable any features in the NSH configuration. Comments updated in several files 2014-07-02 08:54:53 -06:00
Gregory Nutt
400edda109 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
52dbbe76b2 SAMA5D4: Add a configuration option to force EMAC driver debug 2014-07-01 18:00:39 -06:00
Gregory Nutt
23e4d7db0a SAMA5D4: Fix error in EMAC driver (plus related EMAC/GMAC drivers) 2014-07-01 11:22:19 -06:00
Gregory Nutt
b0c1b7ef47 Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
da7379ed18 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
6b5f20cdc6 Fix typo/compile error introduced with last HSMCI changes 2014-06-30 16:08:29 -06:00
Gregory Nutt
c005ac91d7 SAM3/4: Important bugfix. Values read from PIO input pins do not change unless clocking to the PIO block is enabled 2014-06-30 14:26:09 -06:00
Gregory Nutt
588d0178a6 SAMA5D3/4: Fix some logic in conversion of physical and virtal DRAM addresses when running out of DRAM 2014-06-30 11:04:34 -06:00
Gregory Nutt
9a06ff38ec SAMA5D4: Don't touch ISLR unless PIO is configured as an interrupt 2014-06-30 09:17:42 -06:00
Gregory Nutt
ff03914a87 STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek 2014-06-30 08:16:17 -06:00
Gregory Nutt
a85a42ae0f STM32: Reorder MCUs in choice menu; remove duplicates. From Kosma Moczek 2014-06-30 08:13:12 -06:00
Gregory Nutt
d00bb6ab95 STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek 2014-06-30 08:09:19 -06:00
Gregory Nutt
292d2a1c1f Unconfigure GPIO pins when closing a serial port to prevent back effects from back-powering on the TX pin. From Kosma Moczek 2014-06-30 08:02:26 -06:00
Gregory Nutt
fa29170aa7 Make variable definitions 'static const' when possible to save RAM usage. From Kosma Moczek 2014-06-30 07:39:51 -06:00
Gregory Nutt
7780d1cd03 Fix typos in debug statements 2014-06-30 07:38:02 -06:00
Gregory Nutt
ac5ac198d2 SAMA5 PIO: Add support for secure interrupts; Fix PIO debug output 2014-06-29 17:46:55 -06:00
Gregory Nutt
a085646213 SAMA5: Remove kruft in PIO header file 2014-06-29 17:45:42 -06:00
Gregory Nutt
e8d90bf56d SAMA5D4 HSMCI: Fix a compiler in a debug statement 2014-06-29 12:01:08 -06:00
Gregory Nutt
2b626fa85a SAMA5D4 XDMA: Fix some typos 2014-06-29 11:24:57 -06:00
Gregory Nutt
43d13baf35 Fix system bus IDs for SAMA5D4; Don't use explicit PERIPHID_SHIFT for symmetry with memory 2014-06-29 11:24:10 -06:00
Gregory Nutt
63276f5864 SAMA5D: Don't use explicit DMACH_FLAG_MEMPID_SHIFT; it does not exist in the SAMA5D4 2014-06-29 09:52:07 -06:00
Gregory Nutt
a892171b04 SAMA5: Add configuration to assign an XDMAC channel to an HSMCI 2014-06-29 08:43:46 -06:00
Gregory Nutt
668f50e116 SAMA5D4-EK: Updates to get the at25boot configuration building correctly 2014-06-28 09:39:50 -06:00
Gregory Nutt
a97a79a7f3 Add more XMega skeleton directories 2014-06-27 18:34:52 -06:00
Gregory Nutt
a0e48c47a7 Add skeletin of XMega include 2014-06-27 18:22:55 -06:00
Gregory Nutt
fce2a79abd Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
9d9a7e3934 SAM4CM: Fixes from Macs N 2014-06-27 12:27:02 -06:00
Gregory Nutt
f189350bdc SAM4CM: Add IPC register header file. From Macs N 2014-06-27 12:02:30 -06:00
Gregory Nutt
f183632aab Add support for a network device IOCTL to access PHY registers. Ioctls only implemented for STM32. From Lazlo 2014-06-27 09:30:41 -06:00
Gregory Nutt
665f487ed3 SAMA5D4: Add configuration to redirect all interrupts to the AIC 2014-06-26 11:51:39 -06:00
Gregory Nutt
f00ea6ecf9 STM32 I2C reset. Add missing GPIO configuration. From Alex D 2014-06-25 16:08:31 -06:00
Gregory Nutt
579ee6f573 Clean-up packet socket naming 2014-06-25 10:34:52 -06:00
Gregory Nutt
621097b6c8 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
4b3bec6bf3 Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Gregory Nutt
5d1f8180d4 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
626469e30c Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
0c0cb50873 Add support for the LPCXpresso's RTC, ADC, DAC, Timer, PWM, and MCPWM. All form Max 2014-06-23 12:13:52 -06:00
Gregory Nutt
19c1bd3a45 Fix typos in AVR32 Kconfig files. From Stefan Sperling 2014-06-23 11:20:33 -06:00
Gregory Nutt
04e6fdf043 SAMA5D4: Add missing mappings for the VDEC and L2CC memory regions 2014-06-21 14:25:47 -06:00
Gregory Nutt
942d24a005 Correct type of SAMA5 arm_decodefiq() return value 2014-06-21 10:34:35 -06:00
Gregory Nutt
190cbc766e Need to enable FIQ in initial task state; Improve H32/64 test in IRQ handling 2014-06-21 09:55:09 -06:00
Gregory Nutt
1186290a8d SAMA5: FIQs should be disabled along with IRQs on most exeptions in most configuratinons. arm_decodefiq and arm_decodeirq are mutually exclusive and, hence, can use the same interrupt stack 2014-06-20 18:49:01 -06:00
Gregory Nutt
3f6b1642ca SAMA5D4: Add support for secure/FIQ interrupts; SAIC supports need to be be enabled unconditionally 2014-06-20 18:16:41 -06:00
Gregory Nutt
9542994616 SAMA5D4: Fix MATRIX32 base address 2014-06-20 18:15:13 -06:00
Gregory Nutt
ec0fc7756b SAMA5D4: Minor fixes to get working with SAMA5D3 again 2014-06-20 16:01:45 -06:00
Gregory Nutt
fb25ba907c SAMA5D4: Add partial support for secure interrupt controller (SAIC) 2014-06-20 15:22:00 -06:00
Gregory Nutt
083986e814 SAMA5D4: USART peripheral clock appears to be MCK/2 2014-06-20 11:40:36 -06:00
Gregory Nutt
a55457b175 SAMA5D4-EK: Make sure that the H32MX divider is set; correct sense of bit driver red LED 2014-06-20 10:33:33 -06:00
Gregory Nutt
ac6b64dac3 SAMA5D4: Fix peripheral clocking macros: AIC and L2CC are continuously clocked 2014-06-19 15:52:42 -06:00
Gregory Nutt
231fd1b5c8 SAMA5D4: Initial bring-up fixes 2014-06-19 14:16:36 -06:00
Gregory Nutt
acf42e2ce4 Costmetic update to comments/README file 2014-06-18 17:40:06 -06:00
Gregory Nutt
2b5f8dbba5 Cosmetic cleanup 2014-06-18 08:24:53 -06:00
Gregory Nutt
9c0de33715 SAMA5D4: XDMAC driver now compiles error/warning free (still untested) 2014-06-17 16:31:09 -06:00
Gregory Nutt
9d44747f60 SAMA5D4: More progress on XDMAC driver (still no complete); Also fixes some critical errors in the SAMA5D3 DMA definitions 2014-06-17 13:18:52 -06:00
Gregory Nutt
260c2676d4 SAMA5D4: Correct MATRIX register addresses 2014-06-14 10:42:53 -06:00
Gregory Nutt
37d06c7444 SAMA5D4: Implement SDRAM initialization 2014-06-14 10:42:26 -06:00
Gregory Nutt
d80c55e8b6 SAMA5D4: Fix some memory remapping issues; updates to comments and README files 2014-06-14 08:02:58 -06:00
Gregory Nutt
2c6c1685de SAMA5: XDMAC update (still not complete) 2014-06-13 11:59:44 -06:00
Gregory Nutt
2423ef3fdc SAMA5D4: Initial XDMAC driver logic; initial check-in is little more the the DMAC driver with some name changes 2014-06-12 16:33:04 -06:00
Gregory Nutt
faaf641490 First check-in of Lazlo's PF_PACKET 'raw' socket implementation 2014-06-12 11:52:06 -06:00
Gregory Nutt
3bfc1effaf STM32: Handle setting of USART CR1_M when 8 bits of data plus parity 2014-06-11 15:49:54 -06:00
Gregory Nutt
fd710fc8db Typo in last SAMA5D4 commit 2014-06-11 13:43:54 -06:00
Gregory Nutt
69c18728f2 SAMA5: Add support for Micrel KSZ8081 PHY 2014-06-11 13:25:59 -06:00
Gregory Nutt
8b450d6d1b SAMA5D4: Add EMAC driver 2014-06-11 12:23:31 -06:00
Gregory Nutt
9d0cfcc21d SAMA5D4: Still trying to reconcile Ethernet interfaces 2014-06-11 08:01:48 -06:00
Gregory Nutt
e0a07125c8 SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later 2014-06-10 17:40:25 -06:00
Gregory Nutt
03ba83fedb STM32: Expicitly include header file files. From Freddie Chopin 2014-06-10 15:49:48 -06:00
Gregory Nutt
760b60436f SAMA5D4: update MATRIX register definitions for the SAMA5D4 2014-06-10 13:15:29 -06:00
Gregory Nutt
80c07aa2d6 SAMA5D4: Complete MPDDR header file 2014-06-10 11:16:05 -06:00
Gregory Nutt
a64411715b SAMA5D4: Add MPDDRC file (incomplete) 2014-06-10 08:46:14 -06:00
Gregory Nutt
90b82696ac Move SAMA5D3 MPDDRC definitions to a separate header file 2014-06-10 08:11:31 -06:00
Gregory Nutt
55f9e5b465 SAMA5D4: Update LCDC header file 2014-06-09 13:27:08 -06:00
Gregory Nutt
e9e22d7096 Add logic to select between incompatible SAMA5D3 and SAMA5D4 EMAC header files 2014-06-09 12:24:39 -06:00
Gregory Nutt
1f64e9c5b9 SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently 2014-06-09 12:16:16 -06:00
Gregory Nutt
46e5d8b153 SAMA5D4: Updated EMAC header file 2014-06-09 11:40:11 -06:00
Gregory Nutt
082ab99e9e SAMA5D4: Add EMAC header file 2014-06-09 11:29:02 -06:00
Gregory Nutt
e057a05c92 SAMA5D4: More header file changes 2014-06-09 10:07:00 -06:00
Gregory Nutt
1c84924373 SAMA5D4: update ISI register definition header file 2014-06-09 09:29:23 -06:00
Gregory Nutt
92d6883a71 SAMA5D4: Completes PMC modifications for the SAMA5D4 2014-06-09 07:55:51 -06:00
Gregory Nutt
4d65dd04e2 SAMA5D4: Completes L2CC register definition header file 2014-06-08 19:08:11 -06:00
Gregory Nutt
d3903be2a6 SAMA5D4: Update HSMC register definitions 2014-06-08 16:27:58 -06:00
Gregory Nutt
0b5609d6fe SAMA5D4: Update PIO register definitions 2014-06-08 15:35:51 -06:00
Gregory Nutt
80f7079bd9 SAMA5D4: Update DBGU header file 2014-06-08 14:37:09 -06:00
Gregory Nutt
31ac5b344d SAMA5D4: Update PWM header file 2014-06-08 14:16:50 -06:00
Gregory Nutt
54333cd013 SAMA5D4: Updated HSMCI header file 2014-06-08 12:49:45 -06:00
Gregory Nutt
acd6991273 SAMA5D4: Update ADC register definition header file 2014-06-08 12:19:05 -06:00
Gregory Nutt
87a438b240 SAMA5D4: Updated RTC header file 2014-06-08 10:14:36 -06:00
Gregory Nutt
1240c066b2 SAMA5D4: Update register definitions; add support for TC2 2014-06-08 09:19:50 -06:00
Gregory Nutt
339f5f8e51 SAMA5: Add TWI3 support 2014-06-08 08:25:39 -06:00
Gregory Nutt
da8dfdcb6f Updated SAMA5 SFR header file for the SAMA5D4 2014-06-08 07:48:36 -06:00
Gregory Nutt
582cad2e8a SAMA5D4: Add support for UART4 2014-06-08 07:47:56 -06:00
Gregory Nutt
b8b2cc6f0e SAMA5D4: Update one more register definition header files 2014-06-07 14:40:49 -06:00
Gregory Nutt
c86216676f SAMA5D4: Update some register definition header files. Many more still to be done 2014-06-07 13:36:46 -06:00
Gregory Nutt
87eacd6bf2 SAMA5D4: Various changes to get the SAMA4D-EK to build 2014-06-06 15:39:40 -06:00
Gregory Nutt
dc32678da1 LPC17: Fix a critical error in GPDMA reported by Lizhuoyi 2014-06-06 11:20:28 -06:00
Gregory Nutt
39cf9e248b LPC23xx: Several fixes for typos from Lizhuoyi 2014-06-06 11:06:19 -06:00
Gregory Nutt
68eb00be93 SAMA5D4: Add L2CC register definition header file (incomplete) 2014-06-05 14:38:08 -06:00
Gregory Nutt
3960271d06 Finishes the SAMA5D4 XDMAC register definition header file 2014-06-04 16:59:41 -06:00
Gregory Nutt
a0561ddd2e SAMA5D4: Add beginning of XDMAC register definition header file (incomplete) 2014-06-04 14:40:34 -06:00
Gregory Nutt
10232cd784 SAMA5D4: Has two XDMA modules 2014-06-04 14:39:52 -06:00
Gregory Nutt
da889589fd SAMA5D4: Let's consistently use the name XDMAC for the SAMA5D4 DMA module 2014-06-04 14:39:29 -06:00
Gregory Nutt
c95902f8ea Minor naming fix 2014-06-04 13:35:48 -06:00
Gregory Nutt
171f312987 SAMA5: Add pin mux definitions for the SAMA5D4 2014-06-04 12:58:49 -06:00
Gregory Nutt
495b190e50 SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC 2014-06-04 12:04:24 -06:00
Gregory Nutt
21e2d0b2d2 SAMA4D4: Basic framework to support the SAMA4D4. Not yet complete 2014-06-03 17:49:51 -06:00
Gregory Nutt
49fa2ff70f A few build fixes from last, big ARP relocation change 2014-05-30 12:32:20 -06:00
Gregory Nutt
90e4b55e0c Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
6f3cb90c05 Cosmetic changes 2014-05-28 14:09:58 -06:00
Gregory Nutt
2b42e2d587 STM32 RTC: Add retry to initialization logic. Sometime RTC initialization takes longer. From dlsitzer. 2014-05-27 07:10:53 -06:00
Gregory Nutt
ecd768a9e2 Back out PX4 fixes that were reverted in PX4 repository 2014-05-25 07:53:00 -06:00
Gregory Nutt
795ecc3408 STM32 I2C: Final fixes from Max Kriegleder et al. 2014-05-23 08:42:14 -06:00
Gregory Nutt
2abe0dd6dd Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
9aba7598b0 Change bne to bne.n in irqrestore() 2014-05-22 09:01:25 -06:00
Gregory Nutt
11c29aebbc Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
9d2d8d30ea STM32 lowputc: Fix an error in conditional compilation. From Sami Pelkonen 2014-05-20 08:12:07 -06:00
Gregory Nutt
1b39aff8b4 SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled 2014-05-15 11:41:58 -06:00
Gregory Nutt
de71f53351 SAM4E-EK: Ooops.. two touchscreen drivers(?) 2014-05-14 10:56:03 -06:00
Gregory Nutt
d78aa34ecb Fix one error that I made in the last check-in (there are probably more) 2014-05-14 08:09:08 -06:00
Gregory Nutt
6018da5181 Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona 2014-05-14 07:48:47 -06:00
Gregory Nutt
59e254d1f6 correct some columnar alignment and spacing 2014-05-13 14:14:57 -06:00
Gregory Nutt
47dad8d7cf STM32 I2C: Cosmetic changes in preparation to merge a change 2014-05-13 13:11:10 -06:00
Gregory Nutt
4e55571c21 SAM4E: PIO definition clean-up 2014-05-12 18:42:25 -06:00
Gregory Nutt
8ef77ac3d9 Updated README and comments 2014-05-10 11:36:20 -06:00
Gregory Nutt
75d3d33169 STM32 I2C: Bring in PX4 fix for I2C in very high noise environments or with rogue perpipherals. Taken from the PX4 commit by Tridge 2014-05-10 10:34:05 -06:00
Gregory Nutt
898e59f112 Couple of fixes for the latest STM32 additions / modifications. These are simple fixes dealing with conditional compile based on CONFIG items not being set. From Ken Pettit 2014-05-09 06:41:01 -06:00
Gregory Nutt
e2b8eb6aad Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen 2014-05-08 09:20:11 -06:00
Gregory Nutt
7594d8b8cf Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
d36724abbc STM32: Rename pinmap.h files to better reflect the chip naming conventions 2014-05-07 13:05:12 -06:00
Gregory Nutt
6a8a62c0c1 STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
403b9f82d3 Ooops... last (cosmetic) changes were still in the editor 2014-05-06 15:00:39 -06:00
Gregory Nutt
b054463c9e Optimized memcpy() functin for the ARMv7-A from David Sidrane 2014-05-06 14:58:48 -06:00
Gregory Nutt
33c991dc41 STM32: Add more complication to STM32 Kconfig so the correct RNG and ETHMAC options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 11:35:13 -06:00
Gregory Nutt
ade57e4cd8 Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working. 2014-05-06 11:07:10 -06:00
Gregory Nutt
22733f9a79 The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock 2014-05-06 10:01:02 -06:00
Gregory Nutt
f2ac4d6403 STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 08:32:21 -06:00
Gregory Nutt
88abca5e5e STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented 2014-05-05 17:59:07 -06:00
Gregory Nutt
2cbb9b907c Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00
Gregory Nutt
3ad8debd73 Correct some typos in STM32 RCC header files noted by Ramtin Amin 2014-05-05 07:23:26 -06:00
Gregory Nutt
d61a13c131 STM32 F401 has no CCM memory 2014-04-30 16:49:39 -06:00
Gregory Nutt
ccb98abaaa Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed 2014-04-30 16:12:36 -06:00
Gregory Nutt
8d758a13de The CONFIG_SYSTEMTICK_EXTCLK selection should only be available on systems that support it 2014-04-30 15:32:06 -06:00
Gregory Nutt
f7485ea962 Updated system timer logic from Bob Doiron 2014-04-30 14:46:26 -06:00
Gregory Nutt
aa44b8b588 SAM3/4: Enhanced timer/counter driver from Bob Doiron 2014-04-30 14:10:02 -06:00
Gregory Nutt
7857d716b5 Nucleo-F401RE: Fix memory usage 2014-04-30 08:20:30 -06:00
Gregory Nutt
2b2b799a23 ARMv7-M: Add FPU-related CFLAG settings for the CodeSourcery of Linux toolchain 2014-04-29 15:02:34 -06:00