sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
11,361 Commits 1 Branch 0 Tags 291 MiB
0a9d3d872b
Commit Graph

3939 Commits

Author SHA1 Message Date
Gregory Nutt
6143eaec62 mbed: Rename files for better conformance to naming conventions 2015-03-21 08:31:05 -06:00
Gregory Nutt
12aabb985f STM3220G-EVAL: Rename files for better conformance to naming conventions 2015-03-21 08:22:00 -06:00
Gregory Nutt
06f39f6af6 Maple: Rename files for better conformance to standards 2015-03-21 07:35:40 -06:00
Gregory Nutt
e83339891e SAM3U-EK: Rename to better conform to naming standard 2015-03-21 06:52:32 -06:00
Gregory Nutt
9671a123cf STM32F3 Discovery: Rename files to conform better with naming convention 2015-03-21 06:36:28 -06:00
Gregory Nutt
56e24b561f Add Olimexino-STM32 board support from David Sidrane 2015-03-20 18:00:10 -06:00
Gregory Nutt
8712f8b587 Refresh Configuration 2015-03-20 17:45:10 -06:00
Gregory Nutt
6156d5f2fe SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM 2015-03-19 14:53:05 -06:00
Gregory Nutt
dd50e03666 SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts 2015-03-18 17:23:40 -06:00
Gregory Nutt
6763128345 SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts 2015-03-18 15:55:00 -06:00
Gregory Nutt
e7c09fe9cb PIC32MZ: More updates from David Sidrane 2015-03-18 07:34:39 -06:00
Gregory Nutt
480bb3c395 Cosmetic update to README 2015-03-17 17:10:44 -06:00
Gregory Nutt
6dd93c801d PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane 2015-03-17 14:50:11 -06:00
Gregory Nutt
714af6ebb8 SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM 2015-03-17 14:29:41 -06:00
Gregory Nutt
32aadd9cc2 SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling 2015-03-16 13:51:37 -06:00
Gregory Nutt
f60f22258a Trivial update to FAT, comments, README 2015-03-15 15:06:17 -06:00
Gregory Nutt
28ead380ea This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled. 2015-03-15 12:17:39 -06:00
Gregory Nutt
ccc19408f2 Update README files 2015-03-15 10:22:14 -06:00
Gregory Nutt
5fcdb09791 SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working. 2015-03-15 09:35:48 -06:00
Gregory Nutt
85b9a7f1a5 SAMV7: Costmetic changes to SDRAM logic 2015-03-14 13:58:34 -06:00
Gregory Nutt
3b0615ece8 SAMV7: More SDRAM logic. It does still does not work 2015-03-14 13:27:00 -06:00
Gregory Nutt
cc497202ed SAMV71-XULT: Add support for SDRAM (unverified) 2015-03-14 11:00:46 -06:00
Gregory Nutt
d5377842ea SAMV7-XULT: Build support for SDRAM (SDRAM init still missing) 2015-03-14 09:16:27 -06:00
Gregory Nutt
4ebeeecb7b Fix some typos in comments and conditioned out code 2015-03-14 09:14:51 -06:00
Gregory Nutt
fbf36e2b1e Update README 2015-03-14 07:50:03 -06:00
Gregory Nutt
361d4a3fac SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK 2015-03-13 09:27:16 -06:00
Gregory Nutt
639a2c7fd2 Update to PIC32MZ README from David Sidrane 2015-03-13 06:57:58 -06:00
Gregory Nutt
4580af6d0b SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7 2015-03-12 18:03:41 -06:00
Gregory Nutt
743fd5ac50 SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out. 2015-03-12 16:00:38 -06:00
Gregory Nutt
b4b59f928f Minor update to README 2015-03-12 13:43:54 -06:00
Gregory Nutt
da3233a527 SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration 2015-03-12 12:27:06 -06:00
Gregory Nutt
90bc4b81ee SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration 2015-03-11 14:41:58 -06:00
Gregory Nutt
1a68ee6824 Update README 2015-03-11 12:32:00 -06:00
Gregory Nutt
ca8165dd10 SAMV71-XULT: Enable 64-bit floating point support 2015-03-11 12:30:14 -06:00
Gregory Nutt
da844f1a88 SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7 2015-03-11 12:16:27 -06:00
Gregory Nutt
508d96b571 SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs 2015-03-11 11:23:19 -06:00
Gregory Nutt
e8e357cc1d PIC32MZ: Fixes from Kristopher Tate 2015-03-11 10:25:51 -06:00
Gregory Nutt
e2a6b7f5b0 SAMV7-XULT: Switch back to the CodeSourcery tools 2015-03-11 10:24:43 -06:00
Gregory Nutt
834072815b SAMV71-XULT: Some bugfixes from early bring-up work 2015-03-10 16:11:28 -06:00
Gregory Nutt
caea44a624 Fix a case in mq_timedsend() where the return errno value was being overwritten 2015-03-10 12:05:33 -06:00
Gregory Nutt
4c6057eca1 mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin 2015-03-10 09:42:35 -06:00
Gregory Nutt
36e88e504a SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration 2015-03-10 07:50:32 -06:00
Gregory Nutt
1b4e32ef20 Update README 2015-03-09 19:58:59 -06:00
Gregory Nutt
d3033efa9c Cortex-M7: Add cache operations 2015-03-09 15:41:48 -06:00
Gregory Nutt
cfca6b08c5 SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file 2015-03-09 08:23:09 -06:00
Gregory Nutt
2cb3c03678 SAMV7: Add serial driver 2015-03-08 10:15:42 -06:00
Gregory Nutt
3f35f7ff07 SAMV7-XULT: At 3.3V/300MHz, FLASH should require only 4 wait states 2015-03-08 08:41:35 -06:00
Gregory Nutt
967e8bbc7b SAMV71-XULT: Add heap allocation logic 2015-03-07 11:46:54 -06:00
Gregory Nutt
1b193454d7 SAMV7-XULT: Disable networking for now 2015-03-07 11:21:22 -06:00
Gregory Nutt
e2b7dde641 SAMV71-XULT: Switch to the devkitARM toolchain 2015-03-07 11:15:49 -06:00
Gregory Nutt
b3403dee6a SAMV7: Add basic clock and timer ISR configuration logic 2015-03-07 10:32:47 -06:00
Gregory Nutt
4e516beccf SAMV71-XULT: Add linker scripts 2015-03-06 12:46:12 -06:00
Gregory Nutt
36d161fc2b SAMV71: More updates on the way to a clean build. Still more to do to complete that journey 2015-03-06 12:13:09 -06:00
Gregory Nutt
4cde63eead Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71. 2015-03-06 10:53:57 -06:00
Gregory Nutt
d18ed4569c Add a bare bones framework that will do nothing more than support configuration for the Atmel SAMV71 Xplained Ultra board. Very much a work in progress. 2015-03-06 08:56:44 -06:00
Gregory Nutt
e11e731b22 Refresh configuration 2015-03-06 08:26:01 -06:00
Gregory Nutt
9bbad2a56c Refresh configuration 2015-03-05 11:25:10 -06:00
Gregory Nutt
76007d28f5 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
74ab89d6fb PIC32MX SPI: Fix typos in Kconfig; Move constant SPI config data to ROM-able const structure 2015-03-03 10:06:49 -06:00
Gregory Nutt
ffee793745 PIC32MZ: Default SPI configuration setting is backward; refresh configuration 2015-03-03 09:16:10 -06:00
Gregory Nutt
3df273658c PIC32MZ Starter Kit: Add support for on-board buttons 2015-03-02 10:01:10 -06:00
Gregory Nutt
a68f1558f5 Update README 2015-03-01 10:52:44 -06:00
Gregory Nutt
dd288446e5 Update README file 2015-03-01 09:44:44 -06:00
Gregory Nutt
06f8baf709 PIC32MZ: Add ability to select flash ECC options 2015-03-01 09:08:44 -06:00
Gregory Nutt
e2e7c791c1 Refreshed Spark Configurations 2015-02-28 15:44:58 -06:00
Gregory Nutt
64e8b5624c PIC32MZ: Fix reserved RAM for MPLABX; Revert FPLLRNG calculation; Fix maximum DMTCNT value 2015-02-28 12:49:03 -06:00
Gregory Nutt
80f298ebf7 PIC32MZ: Fix some configuration settings and POSC mode should be external clock 2015-02-28 11:54:47 -06:00
Gregory Nutt
6f6d73d757 PIC32MZ: Add an option to use the MIPS32 or the microMIPS ISA 2015-02-28 08:22:37 -06:00
Gregory Nutt
503d2915c6 Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni 2015-02-28 07:14:37 -06:00
Gregory Nutt
12d61531aa Move board_ prototypes from arch.h to board.h 2015-02-27 20:02:03 -06:00
Gregory Nutt
f75184b5ac configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 18:49:24 -06:00
Gregory Nutt
d80455bbce configs/: Remove prototypes of board_led* functions from all board header files 2015-02-27 17:32:01 -06:00
Gregory Nutt
55e21bf045 PIC32MZ: Correct a few more DEVCFG issues 2015-02-27 16:20:28 -06:00
Gregory Nutt
98d34e4cf8 Minor correction to toolchain path, comments 2015-02-27 13:14:41 -06:00
Gregory Nutt
eabf54e7d8 PIC32MZ: Review DEVCFG setting; adjust a few to match example code 2015-02-27 10:54:18 -06:00
Gregory Nutt
5ab181fc4d PIC32MZ: Add logic to configure peripheral pins for the selecte UARTs 2015-02-26 15:05:11 -06:00
Gregory Nutt
04d122c31f Adjust microMIPS compile options to enable interlinking with 32-bit code 2015-02-25 09:54:48 -06:00
Gregory Nutt
6cc74fecc8 Refresh configuration 2015-02-25 07:22:58 -06:00
Gregory Nutt
4edbfc1ebf PIC32MZ: Add support for a timer interrupt 2015-02-24 15:36:08 -06:00
Gregory Nutt
ff43c7ef00 PIC32MZ: Add Oscillator header file; Add logic to set up peripheral clocks on reset 2015-02-24 11:16:32 -06:00
Gregory Nutt
0c9f7bcda6 Merge commit '45e0cf1f4a7664974933db2a408ccea6acad4eff' 2015-02-24 07:13:48 -06:00
sauttefk
81e5edf1e2 EK-TM4C1294XL Launchpad has no SD-card socket 2015-02-24 03:29:02 +01:00
Gregory Nutt
a42813c756 PIC32MZ: Fix some PLL setup logic 2015-02-23 17:27:28 -06:00
Gregory Nutt
87f893887d PIC32MZ: Most related to start up file a FLASH device configuration setup 2015-02-23 16:36:35 -06:00
Gregory Nutt
9432a01645 PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected 2015-02-23 12:09:34 -06:00
Gregory Nutt
2d0589a3cd MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go 2015-02-22 13:45:59 -06:00
Gregory Nutt
5fd0de547b Remove support for obsolete PIC32 toolchain configuration names 2015-02-22 12:14:20 -06:00
Gregory Nutt
13926ce019 PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig' 2015-02-22 10:53:24 -06:00
Gregory Nutt
4e6bdbce59 Add basic board support for the PIC32MZ (can't build yet of course because there is not yet any PIC32MZ support) 2015-02-22 08:47:09 -06:00
Gregory Nutt
d3effb81e9 Add path for Pinguino tools. Need to be careful because bin directory has an incompatible make.exe in it 2015-02-21 19:42:46 -06:00
Gregory Nutt
3d4d63dda2 pic32mx-starterkit: Move scripts to common directory. Pinguino build needs to use a different linker script 2015-02-21 19:40:50 -06:00
Gregory Nutt
2d3d223d3d pic32mx-starterkit: Move scripts to common directory. Pinguino build needs to use a different linker script 2015-02-21 19:40:22 -06:00
Gregory Nutt
cd5b167647 Refresh configurations 2015-02-21 19:38:56 -06:00
Gregory Nutt
78bf6bbf29 Rename pic32-starterkit to pic32mx-starterkit to make room in the namespace for the pic32mz-starterkit 2015-02-21 18:41:17 -06:00
Gregory Nutt
9db37ff67d tm4c123g-launchpad: Add board button interrupt logic. From Calvin Maguranis 2015-02-20 12:32:39 -06:00
Gregory Nutt
42d1346b6e tm4c123g-launchad: Add ADC support. From Calvin Maguranis. 2015-02-17 13:52:17 -06:00
Gregory Nutt
4b562fd2fa NSH: The default priority of the network initialization thread should be lower. It is CPU intensive and can interfere with other operations 2015-02-17 13:14:50 -06:00
Gregory Nutt
f477c9b275 Add support for RTC driver to the STM32F4-Discovery board 2015-02-15 10:11:01 -06:00
Gregory Nutt
3724a5e98e RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
63ac1ec423 Cosmetic updates to comments 2015-02-12 13:44:22 -06:00
Gregory Nutt
3e1173225e Renamed SPIDEV_GSENSOR to SPIDEV_ACCELEROMETER just because it looks better beside SPIDEV_BAROMETER 2015-02-12 12:26:19 -06:00
Gregory Nutt
38aa31dea2 Update ChangeLog 2015-02-12 12:21:05 -06:00
Gregory Nutt
eb84288521 Viewtool STM32F107: Add support for an optional, add-on Freescale MPL115A baramoter. From Alan Carvalho de Assis 2015-02-12 12:08:06 -06:00
Gregory Nutt
5e8cdece21 More updates to README files 2015-02-12 09:06:35 -06:00
Gregory Nutt
6044fc16a8 Updated README files 2015-02-12 07:29:11 -06:00
Gregory Nutt
f64ad4a3f2 Purely costmetic updates 2015-02-12 07:05:28 -06:00
Gregory Nutt
5144e9fa99 The TM4C1294 Launchpad has no on-board TMP100 temperature sensor 2015-02-12 06:49:11 -06:00
Gregory Nutt
2c61bda296 Refresh configurations 2015-02-12 06:48:18 -06:00
Gregory Nutt
85f1eecc51 Review/update of the TM4C1294 Launchpad code 2015-02-11 18:27:38 -06:00
Gregory Nutt
7c61b61adf Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6' 2015-02-11 18:07:03 -06:00
sauttefk
dc402d8d3e Add TI EK-TM4C1294XL launchpad support 2015-02-12 00:30:38 +01:00
Gregory Nutt
08913981bd Add support for Freedom KL26Z board. From Derek B. NoonBurg 2015-02-11 07:18:06 -06:00
Gregory Nutt
3859ee90f8 LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug. 2015-02-10 14:04:08 -06:00
Gregory Nutt
601d99183b SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
fa366e5ddb Refresh configurations 2015-02-10 08:48:02 -06:00
Gregory Nutt
a564872487 Refresh configuration 2015-02-10 06:28:41 -06:00
Gregory Nutt
a38f79679b Refresh Configuration 2015-02-09 18:24:11 -06:00
Gregory Nutt
96589ad16a SAMA5D4-EK: CONFIG_NET_NOINTS is now enabled in the nsh and ipv6 configurations. 2015-02-09 15:27:14 -06:00
Gregory Nutt
fc04eec306 SAMA5D4-EK: Add a configuration for testing IPv6 2015-02-09 10:51:05 -06:00
Gregory Nutt
0195049165 Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing). 2015-02-09 08:34:52 -06:00
Gregory Nutt
e218f620ac Correct a attribution in a comment 2015-02-09 07:27:43 -06:00
Gregory Nutt
8f4bbdd057 Updated Tiva ADC files 2015-02-06 16:56:12 -06:00
Gregory Nutt
2e054154e9 Forgot to add file in previous commit 2015-02-05 18:01:46 -06:00
Gregory Nutt
e87a1eee81 tmv4c123g-launchpad: Add Tiva ADC support to the TM4C123G-Launchpad. From Calvin Maguranis. 2015-02-05 17:58:17 -06:00
Gregory Nutt
46a4396b79 nuttx/configs/tm4c123g-launchpad/src/Makefile 2015-02-05 17:57:31 -06:00
Gregory Nutt
971c5c98fe Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis 2015-02-05 13:51:32 -06:00
Gregory Nutt
968e02a44c Update README files 2015-02-05 12:07:21 -06:00
Gregory Nutt
2d381d059c Update README 2015-02-05 11:23:55 -06:00
Gregory Nutt
cc63543b80 STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
ad719797ef Fix an error in IPv6 netmask caused by a bad range in the Kconfig file 2015-02-05 10:50:25 -06:00
Gregory Nutt
8b2536c699 Refresh configuration 2015-02-05 10:07:31 -06:00
Gregory Nutt
66f0198e3f Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete 2015-02-03 13:25:28 -06:00
Gregory Nutt
f019d11384 Restore 20Msec default 2015-02-02 14:59:49 -06:00
Gregory Nutt
fb72b1b1b7 Auto neighbor solicitation is no longer EXPERIMENTAL and is the default for the DK-TM4C129X/ipv6 configuration 2015-02-02 14:09:06 -06:00
Gregory Nutt
a07a764d42 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
011ff49685 Cosmetic update to a few comments 2015-02-01 12:23:57 -06:00
Gregory Nutt
58c05f365e Refresh some configurations 2015-02-01 12:15:46 -06:00
Gregory Nutt
6d7891c4de Fix compile issues with configs/sim/nettest 2015-02-01 12:00:30 -06:00
jeditekunum
d34b801b1d Obviously can't use LOWCONSOLE with nsh. 2015-02-01 09:21:51 -06:00
Gregory Nutt
2407008b6e drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
Gregory Nutt
f6ff626a2e Moteino Mego: Move linker scripts to scripts/ directory as with other configurations 2015-02-01 06:44:26 -06:00
Gregory Nutt
c8156e11de Moteino Mega: Rename files to conform to newer standards. Need to fix all of the old configurations someday 2015-01-31 14:15:13 -06:00
Gregory Nutt
de24a50eaa Review/modifications for change of last merge 2015-01-31 14:10:53 -06:00
Gregory Nutt
399bfcbf94 Merge commit '1207647ee19ac48746300f2d3fa8f4679c32de95' 2015-01-31 13:47:10 -06:00
jeditekunum
257dc3718a Update README for MoteinoMEGA (ATMEGA1284P) port. 2015-01-31 13:32:31 -06:00
jeditekunum
43c5a6f8f1 Complete initial port. 2015-01-31 11:59:39 -06:00
Gregory Nutt
0fc8d2fcc5 Unix domain: Add options to build in stream or datagram support separately 2015-01-31 07:58:51 -06:00
Gregory Nutt
a5b6ddbc64 apps/ustream and udgram: Change default FIFO path to /dev/fifo 2015-01-30 09:07:22 -06:00
Gregory Nutt
ebf1e121b5 Update configuration 2015-01-29 16:30:43 -06:00
Gregory Nutt
6ac0e90692 Update ChangeLog 2015-01-29 11:48:46 -06:00
Gregory Nutt
7a614072da update configuration 2015-01-29 09:33:24 -06:00
Gregory Nutt
72ac79e7a1 Minor fixes after initial tests with apps/examples/udgram 2015-01-28 15:27:54 -06:00
Gregory Nutt
35a814abca net/socket/accept.c: Ooops.. deleted one too many header files 2015-01-28 14:56:06 -06:00
Gregory Nutt
508f8aefa6 Unix domain socket support is no longer EXPERIMENTAL 2015-01-28 13:22:53 -06:00
Gregory Nutt
58287048e2 Refresh configurations 2015-01-28 12:47:03 -06:00
Gregory Nutt
b4a67285f1 sim/ustream: Add a configuration for testing Unix domain sockets with the simulator 2015-01-28 09:09:27 -06:00
jeditekunum
986c30833a Try console on serial 1. 2015-01-26 14:33:25 -06:00
Gregory Nutt
c16abdcd47 Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth 2015-01-26 07:33:22 -06:00
jeditekunum
b050703849 First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board. 2015-01-24 14:31:35 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
cc4c5bc927 Update README 2015-01-23 16:55:39 -06:00
Gregory Nutt
03e6270e73 configs/dk-tm4c129x/ipv6: Add an IPv6-enabled NSH configruation 2015-01-23 11:45:50 -06:00
Gregory Nutt
c77426e550 Cosmetic changes to comments; refresh configuration 2015-01-22 14:46:36 -06:00
Gregory Nutt
3ba0184051 Refresh configuration/update some misnamed conditional compilation 2015-01-18 11:17:00 -06:00
Gregory Nutt
274200b159 Missing # in #if in previous commit 2015-01-17 17:13:04 -06:00
Gregory Nutt
2fe20d9808 Spark: Certain combinations of conditional compilation results in compilation errors 2015-01-17 14:19:25 -06:00
Gregory Nutt
babe9cf08e Network: Add an IPv4 configuration option. Hardcoded to =y for now, but I would like to be able to select IPv4 and/or IPv6 in the future 2015-01-14 10:51:09 -06:00
Gregory Nutt
72a194ef39 Remove the px4-v2_upstream configuration. Moved to misc/Obsoleted/configs. 
This is not the official configuration for the PX4 board and has led to confusion by NuttX users.  The board configuration also requires some ongoing maintenance and customization to support ongoing PX4 testing and evaluation.  It is best retained the PX4 repositories where it can be properly maintained and not in the upstream NuttX repository.
 2015-01-14 09:54:51 -06:00
Gregory Nutt
a40979407f Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts. 
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer).  Also, do not unconditional enable the timer out interrupt.  The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
 2015-01-14 07:33:59 -06:00
Gregory Nutt
99dd9d9c19 Update README 2015-01-13 16:17:07 -06:00
Gregory Nutt
3efd127e64 Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress. 2015-01-13 11:49:00 -06:00
Gregory Nutt
9c3dce06e1 DK-TM3C129X Timer: Add timer initialization logic to the board bring-up 2015-01-13 11:10:35 -06:00
Gregory Nutt
dcb9f4cf31 TM4C123G LaunchPad: Button support from Bradlye Noyes 2015-01-12 21:14:01 -06:00
Gregory Nutt
64530008ba Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module 2015-01-09 14:10:31 -06:00
Gregory Nutt
1446092e95 Update README 2015-01-07 06:23:24 -06:00
Gregory Nutt
9dd82a5f08 DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration 2015-01-06 13:23:35 -06:00
Gregory Nutt
beaf4afdd4 DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup 2015-01-06 13:23:02 -06:00
Gregory Nutt
383a47fb28 DK-TM4C129X: Add support for on-board TMP100 temperature sensor 2015-01-06 11:50:56 -06:00
Gregory Nutt
207835bd0d Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt 2015-01-05 15:12:45 -06:00
Gregory Nutt
9f2803737d DK-TM4C129X: Enable I2C6 and the I2C tool in the default configuration 2015-01-05 13:40:55 -06:00
Gregory Nutt
67bcdf5514 DK-TM4C129X: The network monitor is no enabled by default in NSH configuration 2015-01-05 12:09:33 -06:00
Gregory Nutt
5752f301de Tiva Ethernet: Add support for PHY interrupts 2015-01-03 13:16:26 -06:00
Gregory Nutt
bc1c73244b DK-TM4C129X: Ethernet networking is now enabled by default in the NSH configuration 2015-01-03 10:27:04 -06:00
Gregory Nutt
c47152b2e5 DK-TM4C129X: Fix RAM size in defconfig files 2015-01-03 09:44:02 -06:00
Gregory Nutt
0e29fcc736 DK_TM4C129X: Add more GPIO pin definitions 2015-01-01 14:16:05 -06:00
Gregory Nutt
3ff87bfda0 DK_TM4C129X: Add some GPIO pin definitions 2015-01-01 13:55:53 -06:00
Gregory Nutt
78d0d911b3 TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers 2015-01-01 12:28:46 -06:00
Gregory Nutt
aef65efd38 Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done 2015-01-01 07:55:15 -06:00
Gregory Nutt
ad4de38641 Refresh configuration 2014-12-31 07:32:47 -06:00
Gregory Nutt
a1bff3f9eb Remove menuconfig warning 2014-12-31 07:31:49 -06:00
Gregory Nutt
3a5571da63 stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-29 09:50:36 -06:00
Gregory Nutt
a99f6c2061 STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken 2014-12-29 07:02:32 -06:00
Gregory Nutt
715ea79555 STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported 2014-12-29 07:01:36 -06:00
Gregory Nutt
7881675f4e Fir STM32v2: Refresh configuration 2014-12-28 18:29:35 -06:00
Gregory Nutt
4e8a4b073d Fire STM32v2: Fix missing stuff in Kconfig file 2014-12-28 18:29:13 -06:00
Gregory Nutt
d99a4409d4 C5471 EVM: Refresh configurations 2014-12-28 18:15:30 -06:00
Gregory Nutt
34617b7ef0 Cloudctrl: Add missing configuration logic 2014-12-28 17:51:11 -06:00
Gregory Nutt
0c7a828ed3 Compal e86 NSH: Fix numerous typos in Make.defs 2014-12-28 17:34:59 -06:00
Gregory Nutt
84db75e507 Hymini-STM32v USB MSC: Fix configuration. Needs mountpoint support for USB MSC. Refreshed 2014-12-28 17:12:03 -06:00
Gregory Nutt
788541aecf Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled 2014-12-28 16:55:47 -06:00
Gregory Nutt
ef73e1ca03 MBED NSH: Should not have CONFIG_SPI_EXCHANAGE in the configuration 2014-12-28 16:39:02 -06:00
Gregory Nutt
1af7fecb08 Freedom-KL25z: Fix breakage from last configuration refresh 2014-12-28 15:23:37 -06:00
Gregory Nutt
3ad7130f37 Mikroe-STM32F4: Refresh one configurations, turning off DEBUG 2014-12-28 14:39:19 -06:00
Gregory Nutt
61f0dcbde0 LM3S6965-EK: Refresh one configurations, turning off DEBUG 2014-12-28 14:35:47 -06:00
Gregory Nutt
702d760e86 Freedom KL25Z: Refresh one configurations 2014-12-28 14:30:44 -06:00
Gregory Nutt
f785ee138a Eagle100: Refresh one configurations, turning off DEBUG 2014-12-28 14:22:11 -06:00
Gregory Nutt
338d76d84b STM32F429-Disco: Refresh five configurations, turning off DEBUG 2014-12-28 14:04:53 -06:00
Gregory Nutt
19037d6c9e STM32F40G-EVAL: Refresh two configurations, turning off DEBUG 2014-12-28 13:53:53 -06:00
Gregory Nutt
ce4c433037 Refresh Configuration 2014-12-26 09:33:20 -06:00
Gregory Nutt
0e625b64f4 Update px4fmu-v2_upstream config 2014-12-26 08:40:02 -06:00
Gregory Nutt
91bc8712ef Fix columnar alignment in Kconfig file. From David Sidrane 2014-12-26 08:37:27 -06:00
Gregory Nutt
541b26f0ff Cosmet updates to comments and README files 2014-12-24 08:15:21 -06:00
Gregory Nutt
7794c79815 DK-TM4C129X: Fix sense of LEDs; active high. Also GPIO for blue and green reversed 2014-12-22 17:41:04 -06:00
Gregory Nutt
dd89bd2233 TM4C129X: A small step toward understanding new Tiva clocking 2014-12-22 09:30:41 -06:00
Gregory Nutt
fe12140f94 Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3 2014-12-21 15:23:37 -06:00
Gregory Nutt
8aa9f27925 Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h 2014-12-20 08:38:11 -06:00
Gregory Nutt
fa5dffbc18 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
31a0e8ac5e Stuff that goes along with the new LTDC README file 2014-12-19 14:14:41 -06:00
Gregory Nutt
1ff469af5f stm32f429i-disco: add default platform configuration to test framebuffer support for the ltdc 
Memory configuration:

The heap start address of memory region 3 starts at 0xD0000000.
The allocated framebuffer of the layers is addressed up to the end of the memory
region 3.

If the layer pixel format changes e.g. from RGB565 to RGB24, than the memory
configuration must be configured too. Currently an easy memory calculation
is missing for that in Kconfig.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:08:59 -06:00
Gregory Nutt
8d6614b9af stm32f429i-disco: initialize ltdc during bootup 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:05:19 -06:00
Gregory Nutt
61c927904f stm32f429i-disco: enable configuration of framebuffer support for the ltdc controller 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 14:02:26 -06:00
Gregory Nutt
d2b7dc0eef stm32f429i-disco: Add support for initializing ltdc framebuffer and the configured lcd display 
This adds support for initializing of the ltdc controller and the lcd device connected on the stm32f429i-disco. The following methods are provided for the generic fb interface:

- up_fbinitialize
- up_fbgetvplane
- fb_uninitialize

The following methods are provided for the ltdc interface:

- up_ltdcgetlayer

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:54:27 -06:00
Gregory Nutt
dd51c8db2d stm32f429i-disco: update board definition for the ili9341 LCD display. This configures all LCD settings for the RGB interface. Also adds a customer LCD display template. 
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-12-19 13:34:37 -06:00
Gregory Nutt
93bcd3e03e TM4C129X: Add custom system control header file (incomplete) 2014-12-19 12:12:52 -06:00
Gregory Nutt
67e6b760e8 Add some OpenOCD scripts for some TI Tiva boards 2014-12-18 16:54:48 -06:00
Gregory Nutt
6cc9716d55 Tiva: Fix configuration logic for IRQ interrupts. The various parts support varying numbers of GPIO blocks and with varying capabilities to support interrupts on the pins of different GPIO blocks 2014-12-18 15:33:52 -06:00
Gregory Nutt
a5fcd71af0 Tiva: Change negative logic CONFIG_TIVA_DISABLE_GPIOx_IRQS to positive logic CONFIG_TIVA_GPIOx_IRQS 2014-12-18 15:19:16 -06:00
Gregory Nutt
e3487f4298 Fix a couple of spelling errors in comments 2014-12-18 13:56:15 -06:00
Gregory Nutt
a1a2e53c3e Freedom KL25Z: Update the CC3000 support to use the current CC300 interfaces. From Alan Carvalho de Assis 2014-12-18 13:52:01 -06:00
Gregory Nutt
0c698a7121 DK-TM4C129X: Add support for buttons 2014-12-18 11:51:30 -06:00
Gregory Nutt
c79bc06988 DK-TM4C129X: Add LED support 2014-12-18 10:20:34 -06:00
Gregory Nutt
55a3c57399 DK-TM4C129X: Fixes to get clean build. Logic is still not complete, however 2014-12-18 08:24:24 -06:00
Gregory Nutt
93a21d2872 Freedom-KL25Z: Add pin configuration for add-on ADXL345 board. From Alan Carvalho de Assis 2014-12-18 07:27:49 -06:00
Gregory Nutt
d286c0f32f A previous change increased the task name size allocation by one to hold a NUL terminator. This changes reduces the configured name size by one so that no additional memory is used 2014-12-17 12:30:26 -06:00
Gregory Nutt
2554b5c89a DK-TM4C129X: Switch to Windows/Cygwin + CodeSourcery 2014-12-17 07:00:22 -06:00
Gregory Nutt
09b16e3819 Remove packaging indications for TM4C129 configuration variables 2014-12-16 16:22:52 -06:00
Gregory Nutt
18c61b6e64 Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system 2014-12-16 16:02:21 -06:00
Gregory Nutt
ca757af8fb Add basic board support for the DK-TM4C129X Connected Development Kit. The initial commit is simply the TM4C123G Launchpad with naming changes 2014-12-16 15:29:14 -06:00
Gregory Nutt
30990b43ef Remove EXPERIMENTAL dependency from the Traveler game. It is basically functional now. 2014-12-16 15:27:36 -06:00
Gregory Nutt
b080940701 Update README files 2014-12-16 14:58:25 -06:00
Gregory Nutt
79b736d43a Fix some typos ADXL (adxl) vs ADX1 (adx1) 2014-12-16 13:50:58 -06:00
Gregory Nutt
cb207d5298 A few bugs/typos introduced with my last change 2014-12-16 12:33:41 -06:00
Gregory Nutt
d818ab5e35 Update the ADXL345 interface following the current interface scheme 2014-12-16 11:45:28 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628 Add ADXL345 accelerometer driver. From Alan Carvalho de Assis 2014-12-16 08:16:53 -06:00
Gregory Nutt
e513ed9df8 Forgot to add file before last commit 2014-12-16 07:48:58 -06:00
Gregory Nutt
fd40ea4328 Freedom-KL25Z: Add board specific code to interface with ADXL345 driver. From Alan Carvalho de Assis 2014-12-16 07:48:22 -06:00
Gregory Nutt
4aa9320da9 Update README files 2014-12-15 19:01:40 -06:00
Gregory Nutt
df30780f37 Various fixes to traveler joystick input logic and to simulated joystick device 2014-12-14 12:23:19 -06:00
Gregory Nutt
6e1084116b SIM: Add an X11 mouse-based simulation of an analog joystick device 2014-12-14 10:19:07 -06:00