Janne Rosberg
|
02979feb7b
|
samdl/saml_usb.h: fix wrong EP offset calculation. From Janne Rosberg
|
2015-07-10 15:21:37 -06:00 |
|
Janne Rosberg
|
b32d747212
|
Fix some typos. From Janne Rosberg
|
2015-07-10 15:19:24 -06:00 |
|
Janne Rosberg
|
d6a51360f1
|
samdl: fix USBDEV_PKTSIZE_BCNT size. From Janne Rosberg
|
2015-07-10 15:15:55 -06:00 |
|
Alessandro Temil
|
d4cd35af5f
|
More changes to LPC3450 pin configuration: The hardware ETM pins will not toggle unless the SLEW FAST bit is set. From Alessandro Temil.
|
2015-07-09 13:36:22 -06:00 |
|
Alessandro Temil
|
d687bedf36
|
Correct some LPC4350 GPIO pin configurations. From Alessandro Temil
|
2015-07-09 12:09:00 -06:00 |
|
Gregory Nutt
|
56e4189a73
|
SAMD21: Correct some GCLK ID definitions for SERCOM
|
2015-07-06 09:26:49 -06:00 |
|
Gregory Nutt
|
ef5531b30b
|
SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21
|
2015-07-04 13:18:30 -06:00 |
|
Gregory Nutt
|
724c1eacaa
|
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
|
2015-07-04 10:39:24 -06:00 |
|
Gregory Nutt
|
2e5bef56f2
|
SAMD20/1: Fix some typos found by inspecting header files
|
2015-07-04 07:19:52 -06:00 |
|
Gregory Nutt
|
b8976adfb3
|
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
|
2015-07-03 09:33:52 -06:00 |
|
Gregory Nutt
|
797aa0a138
|
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
|
2015-07-03 06:53:51 -06:00 |
|
Gregory Nutt
|
004c076985
|
Correct some issues introduced in the last commit
|
2015-07-02 17:54:05 -06:00 |
|
Gregory Nutt
|
c3290fdabd
|
Modify board_power_off() so that is is called only via boardctl()
|
2015-07-02 17:09:54 -06:00 |
|
Gregory Nutt
|
19320d157a
|
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
|
2015-07-02 16:25:31 -06:00 |
|
Gregory Nutt
|
51df91e93d
|
STM32 RTCC: Eliminate a warning when ALARM support is enabled
|
2015-07-02 15:02:59 -06:00 |
|
Gregory Nutt
|
1839d132f0
|
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
|
2015-07-02 11:13:23 -06:00 |
|
Gregory Nutt
|
46fec91b12
|
Remove a warning
|
2015-07-01 18:25:13 -06:00 |
|
Gregory Nutt
|
6df1d2823f
|
Fix misc. compilation error/warning detected by tools/testbuild.sh
|
2015-07-01 14:33:37 -06:00 |
|
Gregory Nutt
|
dbc5f910fc
|
Fix some typos in header files
|
2015-07-01 11:45:08 -06:00 |
|
Gregory Nutt
|
c73745bede
|
lpc214x USB device: Fix a warning
|
2015-07-01 10:25:14 -06:00 |
|
Gregory Nutt
|
d20dbf5054
|
LPC17xx: Fix a warning about an unused local variable
|
2015-07-01 09:36:39 -06:00 |
|
Gregory Nutt
|
92f9876f75
|
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
|
2015-07-01 08:34:51 -06:00 |
|
Gregory Nutt
|
77285beeca
|
DM320: GIO header uses get/putreg functions and so should include up_arch.h
|
2015-07-01 08:01:49 -06:00 |
|
Gregory Nutt
|
a1676a177d
|
arch/arm/src/sama5/sam_ehci.c: Fix some bad conditional compilation that left a function undefined if CONFIG_USBHOST_ASYNCH is not selected.
|
2015-07-01 07:04:02 -06:00 |
|
Alan Carvalho de Assis
|
928c88a5f6
|
Port some per-process stack dumping logic from ARMv7-M to ARMv6-M. From Alan Carvalho de Assis
|
2015-06-30 11:42:48 -06:00 |
|
Alan Carvalho de Assis
|
39b77fbe8b
|
Fix Cortex-M0 assembly error when the interrupt stack is enabled
|
2015-06-30 08:41:47 -06:00 |
|
Gregory Nutt
|
fb926e7283
|
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
|
2015-06-28 08:08:57 -06:00 |
|
Gregory Nutt
|
27bdf5d8a1
|
SAMD21: Update SPI and I2C header files for SAMD21 support
|
2015-06-22 13:12:00 -06:00 |
|
Max Neklyudov
|
8438b8eee8
|
SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
|
2015-06-22 09:32:15 -06:00 |
|
Gregory Nutt
|
911b1ce68e
|
SAMD21: Update WDT and EVSYS header files for SAMD21 support
|
2015-06-22 09:15:54 -06:00 |
|
Gregory Nutt
|
52803ee23b
|
Back out another error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc().
|
2015-06-22 07:48:29 -06:00 |
|
Max Neklyudov
|
0f19a33b3d
|
SAM4CM: Fix SUPC register definitions. From Max Neklyudov
Remove conditional logic form non-SAM4CM parts (Gregory Nutt)
|
2015-06-22 06:52:57 -06:00 |
|
Max Neklyudov
|
e4d7b311b7
|
sam4cm: add CFB and MAC AES modes. From Max Neklyudov
|
2015-06-22 06:42:37 -06:00 |
|
Max Neklyudov
|
bdf0b6a9ab
|
Back out an error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). From Max Neklyudov.
|
2015-06-22 06:19:45 -06:00 |
|
Gregory Nutt
|
c5bc7cc120
|
SAMD21: Update SAMD SYSCTRL and NVMCTRL definitions for the SAMD21
|
2015-06-21 11:40:23 -06:00 |
|
Gregory Nutt
|
e7e7b465d5
|
SAMD21: Update fuse definitions for the SAMD21
|
2015-06-21 10:20:23 -06:00 |
|
Gregory Nutt
|
4a38276ff9
|
SAMD21: Extend SAMD USART support to include SAMD21 differences
|
2015-06-21 09:17:01 -06:00 |
|
Gregory Nutt
|
780cb0911d
|
Add board configuration for the SAMD21 Xplained board
|
2015-06-21 07:48:46 -06:00 |
|
Gregory Nutt
|
379a1e114f
|
SAMD21: Add pin multiplexing definitions
|
2015-06-20 18:55:23 -06:00 |
|
Gregory Nutt
|
97d697f7c4
|
SAMD2x: Eliminate a warning
|
2015-06-20 16:06:01 -06:00 |
|
Gregory Nutt
|
5eeabf29dd
|
Missed a few in previous commit
|
2015-06-20 15:55:56 -06:00 |
|
Gregory Nutt
|
1d3abb18e4
|
SAMD21: Update GCLKs for SAMD21
|
2015-06-20 15:55:21 -06:00 |
|
Gregory Nutt
|
d9863f11f6
|
SAMD21: Update PM definitions for SAMD21 support
|
2015-06-20 15:32:57 -06:00 |
|
Gregory Nutt
|
28ae44eb02
|
SAMD21: Add memory map header file
|
2015-06-20 15:02:25 -06:00 |
|
Gregory Nutt
|
66a960dacd
|
SAMD21: Add interrupt vectors definitions
|
2015-06-20 14:40:47 -06:00 |
|
Gregory Nutt
|
15c8e2e00a
|
SAMD21: Add interrupt vectors definitions
|
2015-06-20 14:40:36 -06:00 |
|
Gregory Nutt
|
d00ed2d780
|
Add configuration support for SAMD21
|
2015-06-20 14:31:53 -06:00 |
|
Gregory Nutt
|
e013bb49a8
|
SAML21 USB: Add host side register defintiions
|
2015-06-20 11:09:35 -06:00 |
|
Gregory Nutt
|
d298b8048c
|
SAML21 USB: Add device side register defintiions
|
2015-06-20 09:25:06 -06:00 |
|
Gregory Nutt
|
b6629c0745
|
SAML21: Partial USB header file
|
2015-06-20 07:13:35 -06:00 |
|
Gregory Nutt
|
b39cd9ee93
|
Refresh SAMV71-Xult configurations
|
2015-06-17 12:01:33 -06:00 |
|
Gregory Nutt
|
ad7eb4e24f
|
Update some comments
|
2015-06-17 06:31:30 -06:00 |
|
Gregory Nutt
|
3c06202152
|
SAM4L DMA: Need separate peripheral IDs for TX and RX
|
2015-06-17 06:23:07 -06:00 |
|
Alan Carvalho de Assis
|
2a10db2dbf
|
SAMA5D TWI: Fix typo in driver initialization logic.
|
2015-06-17 06:13:46 -06:00 |
|
Gregory Nutt
|
a5175456ed
|
SAML21: Add OPAMP register definition header file
|
2015-06-16 15:54:49 -06:00 |
|
Gregory Nutt
|
61543db536
|
SAML21: Add DAC register definition header file
|
2015-06-16 13:32:27 -06:00 |
|
Gregory Nutt
|
5ee4cf6ae4
|
SAML21: Add AES register definition header file
|
2015-06-16 12:22:49 -06:00 |
|
Gregory Nutt
|
b5cc782205
|
SAML21 DMAC: Mostly cosmetic changes
|
2015-06-16 10:39:21 -06:00 |
|
Gregory Nutt
|
08dcb6dc8d
|
SAML21 DMA: Fix a logic error. Since the write back descriptors overly the base descriptors, we need to do some special things in order to correctly free any allocated descriptors
|
2015-06-16 10:07:26 -06:00 |
|
Gregory Nutt
|
12ca013ff4
|
SAMV7: Add RTC register definition header file
|
2015-06-16 07:23:47 -06:00 |
|
Gregory Nutt
|
b1230eb951
|
Fix a comment
|
2015-06-15 15:09:23 -06:00 |
|
Gregory Nutt
|
48b7631dbb
|
SAMV7: Add MCAN register definition header file
|
2015-06-15 11:37:59 -06:00 |
|
Gregory Nutt
|
9511364a03
|
SAML21 minor stuff
|
2015-06-14 14:27:58 -06:00 |
|
Gregory Nutt
|
01c5c63369
|
SAML21: Completes first rought cut of DMAC driver
|
2015-06-14 13:29:59 -06:00 |
|
Gregory Nutt
|
4f8db55462
|
SAML21 DMA: BASEADDR and WRBADDR can only be written while the DMAC is disabled
|
2015-06-14 11:46:44 -06:00 |
|
Gregory Nutt
|
fb6252aa6f
|
SAML21 DMA: More DMA logic. Still incomplete
|
2015-06-14 11:26:52 -06:00 |
|
Gregory Nutt
|
c2f2919ab0
|
SAML21 DMA: Add logic to set up base and writeback table addresses
|
2015-06-14 10:51:10 -06:00 |
|
Gregory Nutt
|
1f6f3d7bb2
|
Fix reversed arguments in SAML21 DMA logic
|
2015-06-14 08:52:39 -06:00 |
|
Gregory Nutt
|
75077f4728
|
SAML21: Add DMA descriptor management logic
|
2015-06-14 08:48:25 -06:00 |
|
Gregory Nutt
|
8c8b2d926b
|
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
|
2015-06-13 15:06:37 -06:00 |
|
Gregory Nutt
|
26518df3ed
|
SAML21: Add DMAC register definition header file
|
2015-06-13 10:16:07 -06:00 |
|
Gregory Nutt
|
29136e51cc
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:26:01 -06:00 |
|
Gregory Nutt
|
c07a9632cc
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:17:42 -06:00 |
|
Gregory Nutt
|
7bd3d5eaf1
|
Clean up and review of header files for conformance to standards
|
2015-06-12 19:00:52 -06:00 |
|
Gregory Nutt
|
d6ce8220fd
|
Clean up and review of header files for conformance to standards
|
2015-06-12 18:07:47 -06:00 |
|
Gregory Nutt
|
46148524a9
|
SAM4S/4E: Eand default loop optimiozation if EEFC_FMR configuration. From Marco Aurélio da Cruz
|
2015-06-11 14:35:49 -06:00 |
|
Gregory Nutt
|
4b11c9da2c
|
Kinetis: Add up-sysemreset.c to Make.defs
|
2015-06-11 12:08:45 -06:00 |
|
Gregory Nutt
|
4712c23218
|
Make some imported files a little closer to the NuttX coding standard
|
2015-06-11 09:14:44 -06:00 |
|
Gregory Nutt
|
85d88d364f
|
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
|
2015-06-11 08:39:40 -06:00 |
|
Gregory Nutt
|
7fab748667
|
STL32 F15x: stm32_stdclockconfig() was calling stm32_pw_setvos() which accessed PWR_CR via an inactive APB. From Juha Niskanen.
|
2015-06-11 08:09:36 -06:00 |
|
Gregory Nutt
|
98b2034cdf
|
Teensy-3.1: Add user LED support
|
2015-06-10 17:19:26 -06:00 |
|
Gregory Nutt
|
ad2a529624
|
RAM functions should have noinline attribute
|
2015-06-10 14:51:42 -06:00 |
|
Gregory Nutt
|
cb1a6e7954
|
Cosmetic
|
2015-06-10 14:20:11 -06:00 |
|
Gregory Nutt
|
0742ee3c3e
|
Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed for backward compatible support for Teensy-3.0
|
2015-06-10 11:45:17 -06:00 |
|
Gregory Nutt
|
075261f5ee
|
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
|
2015-06-10 08:38:35 -06:00 |
|
Gregory Nutt
|
9be151cdbb
|
SAML21: A different SLOW clock must be used with SERCOM5
|
2015-06-10 08:18:05 -06:00 |
|
Gregory Nutt
|
f01c04f1a7
|
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
|
2015-06-09 18:01:32 -06:00 |
|
Gregory Nutt
|
d1847d2e0b
|
Correct write to incorrect register in EFM32 SPI driver. From Pierre-noel Bouteville.
|
2015-06-09 12:50:30 -06:00 |
|
Gregory Nutt
|
13e8c0d5b1
|
Update/add README.txt files
|
2015-06-09 07:03:25 -06:00 |
|
Gregory Nutt
|
f3425d6298
|
Fix SAMA5 CAN frame construction. From Max Holtzberg.
|
2015-06-07 13:13:44 -06:00 |
|
Gregory Nutt
|
f875a26ed2
|
Add SPI GPIO pin initialization. From Pierre-noel Bouteville.
|
2015-06-05 14:26:21 -06:00 |
|
Gregory Nutt
|
0488df7cf3
|
Correct some comments. Noted by Jouko Holopainen
|
2015-06-04 08:12:58 -06:00 |
|
Gregory Nutt
|
e816afe161
|
LC17 Ethernet: Ignore 4-bit versin number when checking for PHY ID match
|
2015-06-03 19:47:10 -06:00 |
|
Gregory Nutt
|
03562269d4
|
Lincoln60: Add a network enabled NXH configuration (still does not yet build)
|
2015-06-03 18:48:08 -06:00 |
|
Gregory Nutt
|
7677cf72eb
|
LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY.
|
2015-06-03 17:34:36 -06:00 |
|
Gregory Nutt
|
d9d6ff1d1b
|
Fix some memory sizing errors in refreshed defconfig files
|
2015-06-02 08:44:57 -06:00 |
|
Gregory Nutt
|
e6b8d2eebe
|
Refresh some Olimex LPC1766STK networking configurations
|
2015-06-02 08:12:44 -06:00 |
|
Gregory Nutt
|
1d697a18d1
|
Condition default value for CONFIG_ARMV7M_TARGET2_PREL on UCLIBCXX_EXCEPTION
|
2015-06-01 15:12:33 -06:00 |
|
Gregory Nutt
|
280e2ee385
|
Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132
|
2015-06-01 14:16:18 -06:00 |
|
Gregory Nutt
|
73419e77f4
|
LPC17 Ethernet: Fix several compilation related issues when CONFIG_NET_NOINTS=y
|
2015-06-01 08:35:40 -06:00 |
|
Gregory Nutt
|
29b6f140e3
|
LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation
|
2015-06-01 08:07:32 -06:00 |
|
Gregory Nutt
|
0c59dd2888
|
Fix a missing # in the previous commit
|
2015-05-31 13:26:13 -06:00 |
|
Gregory Nutt
|
4e811aa54d
|
Add basic support for the STM32F205RG. From SourceForge Ticket 40 (anonymous).
|
2015-05-31 13:06:26 -06:00 |
|
Gregory Nutt
|
38735fafeb
|
More missing semicolons after DEBUGASSERT
|
2015-05-27 13:32:39 -06:00 |
|
Gregory Nutt
|
d41b050526
|
Fix another missing semicolon after DEBUGASSERT
|
2015-05-27 11:49:19 -06:00 |
|
Gregory Nutt
|
d50761428c
|
LPC11: Fix hardcoded BAUD calculation. Is no configurable. From Alan Carvalho de Assis
|
2015-05-27 09:44:07 -06:00 |
|
Gregory Nutt
|
528275a77c
|
Fix some typos
|
2015-05-27 07:34:35 -06:00 |
|
Gregory Nutt
|
ac102d3f85
|
K20: Some preliminary pin definitions
|
2015-05-26 17:02:47 -06:00 |
|
Gregory Nutt
|
318345fb1d
|
Basic support for the Kinetis K20 architecture. Taken from PX4. This is the work of Jakob Odersky.
|
2015-05-26 15:03:35 -06:00 |
|
Gregory Nutt
|
cae38625f8
|
SAM4L: Fix some issues from loast commit. Now running off DFLL with source clock = XOSCK32K
|
2015-05-26 13:25:39 -06:00 |
|
Gregory Nutt
|
b96a141e8a
|
SAML21-Xlplained: Add options to enable XOSC32K and to use it as the DFLL source; NSH configure now uses DFLL with OSC16M source
|
2015-05-26 10:39:38 -06:00 |
|
Gregory Nutt
|
f055d4cac4
|
Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov
|
2015-05-26 08:09:10 -06:00 |
|
Gregory Nutt
|
fe175fbc16
|
SAMD20: Fixes the problem introduced with the SAML21 integration
|
2015-05-25 10:13:06 -06:00 |
|
Gregory Nutt
|
643a98a0a8
|
SAML21: Fix issue with open loop operation; Add configuration options to select clock source
|
2015-05-24 10:27:37 -06:00 |
|
Gregory Nutt
|
9649e564f9
|
LPC11xx: Use offsets instead of absolute address in look-up tables. This saves about 156 bytes of FLASH. From Alan Carvalho de Assis.
|
2015-05-24 07:49:38 -06:00 |
|
Gregory Nutt
|
6973337ccd
|
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
|
2015-05-23 17:08:35 -06:00 |
|
Gregory Nutt
|
8e71f90d84
|
SAML21: Add missing support for GCLK8
|
2015-05-23 17:02:13 -06:00 |
|
Gregory Nutt
|
d495834882
|
SAML21: Several SERCOM fixes. No gets UART output, but at the wrong BAUD
|
2015-05-23 13:08:28 -06:00 |
|
Gregory Nutt
|
84ca7f4a46
|
SAM4L: Re-order some clock initialization. There was a dependency of GCLK0 on DFLL, but DFLL was being enabled after GCLK0
|
2015-05-23 11:01:22 -06:00 |
|
Gregory Nutt
|
41f9fb8c62
|
SAML21: Fix some register definitions; board OSC16M frequency
|
2015-05-23 10:54:51 -06:00 |
|
Gregory Nutt
|
09d1bc7060
|
LPC11xx: Add support for up_getc() which is needed for NSH if there is no file system. From Alan Carvalho de Assis.
|
2015-05-23 09:23:36 -06:00 |
|
Gregory Nutt
|
601aa6e358
|
SAMD/L: Change ordering of some initialization steps to match Atmel sample code. Add Errate 13134 support. SAML wait states changed to 1. Sample code is using 0
|
2015-05-23 08:55:06 -06:00 |
|
Gregory Nutt
|
d1aae43e2a
|
SAM4CM: Add support for optical mode for UART1. From Max Neklyudov.
|
2015-05-23 06:48:36 -06:00 |
|
Gregory Nutt
|
9140a0fcc4
|
Initial support for the NXP LPC11 family and the LPC1115 MCU in particular. Contributed by Alan Carvalho de Assis.
|
2015-05-22 14:14:09 -06:00 |
|
Gregory Nutt
|
1c82e961f5
|
SAML21. With these changes, the board now builds without error
|
2015-05-22 10:36:37 -06:00 |
|
Gregory Nutt
|
0eee2c40a8
|
SAML21: Rename sam_gclk.c to samd_gclk.c. Create saml_gclk.c with corrected logic for the SAML21
|
2015-05-22 07:28:19 -06:00 |
|
Gregory Nutt
|
2314cbd37e
|
SAML21 clock config: Fix a misthink in last commit. Move setting of ONDEMAND to after clock is enabled in most cases
|
2015-05-21 16:50:55 -06:00 |
|
Gregory Nutt
|
2478184c22
|
SAML21: Clean up a few more compilation issues
|
2015-05-21 16:23:15 -06:00 |
|
Gregory Nutt
|
a0b9e26aba
|
SAML21: Add logic to set MCLK CPU and related dividers
|
2015-05-21 13:40:34 -06:00 |
|
Gregory Nutt
|
ed47a08832
|
SAML21: Add FDPLL96M configuration logic
|
2015-05-21 11:52:38 -06:00 |
|
Gregory Nutt
|
786b292b1f
|
SAML21: Add logic to support GLCK peripheral channels; add logic to configure FDPLL lock timer and ref clock GCLKs
|
2015-05-21 10:47:41 -06:00 |
|
Gregory Nutt
|
544a789714
|
SAMD/L: Move GCLK configuration logic to its own C file
|
2015-05-21 10:07:42 -06:00 |
|
Gregory Nutt
|
4a60f1c9f5
|
STM32: Building stm32_rng.c should be conditioned on CONFIG_STM32_RNG, not CONFIG_DEV_RANDOM. From Juha Niskanen
|
2015-05-21 07:47:22 -06:00 |
|
Gregory Nutt
|
790d53bb06
|
SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov.
|
2015-05-21 07:06:47 -06:00 |
|
Gregory Nutt
|
bd2bbfe53a
|
Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
|
2015-05-20 18:34:15 -06:00 |
|
Gregory Nutt
|
ac2fe431aa
|
SAML21: Add some parameter checking for FDPLL96M
|
2015-05-20 13:51:40 -06:00 |
|
Gregory Nutt
|
5eae4c914a
|
Minor restructure for SAML21 FDPLL
|
2015-05-20 13:37:08 -06:00 |
|
Gregory Nutt
|
307d0d0e55
|
SAML21 minor cleanup
|
2015-05-20 13:00:39 -06:00 |
|
Gregory Nutt
|
8075f8ab84
|
SAML32: Update some DFLL logic
|
2015-05-20 12:26:49 -06:00 |
|
Gregory Nutt
|
7000cf8193
|
Fix SYNCBUSY wait for the SAML21
|
2015-05-20 11:49:24 -06:00 |
|
Gregory Nutt
|
321b54f49a
|
Updated EFM32 RTC driver from Pierre-noel Bouteville
|
2015-05-19 14:53:01 -06:00 |
|
Gregory Nutt
|
8980f72251
|
SAML21-Xplained: Update the cloned SAMD20-Xplained board configuration for specifics of the SAML21-Xplained
|
2015-05-19 14:32:09 -06:00 |
|
Gregory Nutt
|
23732e2c9b
|
SAMD/L: Hide differences in the way peripheral clocking is enabled behind macros. Some updates to saml_clockconfig.h + various fixes while working toward SAML21 build
|
2015-05-19 11:03:24 -06:00 |
|
Gregory Nutt
|
b94a8d7ee7
|
Clock configuration logic for the SAML21. Initial commit is just the SAMD20 clock configuration with some naming changes and does not compile
|
2015-05-19 07:02:58 -06:00 |
|
Gregory Nutt
|
792c76c4e6
|
Add saml_trng.h for SAML32
|
2015-05-19 06:31:48 -06:00 |
|
Gregory Nutt
|
0294384dd7
|
Add saml_eic.h for SAML21
|
2015-05-18 18:55:16 -06:00 |
|
Gregory Nutt
|
4458a34787
|
SAML21: Add interrupt header file + fix a few initial compile issues. Still a long way to go
|
2015-05-18 17:41:28 -06:00 |
|
Gregory Nutt
|
dfa87403b3
|
Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build
|
2015-05-18 13:16:32 -06:00 |
|
Gregory Nutt
|
c28a6a91f3
|
Rename sam_fuses.h to samd_fuses.h; add saml_fused.h for the SAML21
|
2015-05-18 11:59:53 -06:00 |
|
Gregory Nutt
|
aecb60a8e8
|
Rename sam_sercom.h to samd_sercom.h; Add saml_sercom.h for the SAML21
|
2015-05-18 10:54:50 -06:00 |
|
Gregory Nutt
|
317fb073ef
|
Rename sam_port.h to samd_port.h; add saml_port.h for the SAML21
|
2015-05-18 10:35:11 -06:00 |
|
Gregory Nutt
|
16a2d363f9
|
Rename sam_nvmctrl.h to samd_nvmctrl.h; add saml_nvmctrl.h for SAML21
|
2015-05-18 09:44:12 -06:00 |
|
Gregory Nutt
|
a8cf79da52
|
Add SAML21 SUPC header file
|
2015-05-18 07:25:30 -06:00 |
|
Gregory Nutt
|
54027c756e
|
Add saml_i2c_slave.h for the SAML21
|
2015-05-17 18:18:35 -06:00 |
|
Gregory Nutt
|
d0f236d855
|
Fix some mismatched C++ logic in header files
|
2015-05-17 16:51:18 -06:00 |
|
Gregory Nutt
|
2dc8fd6958
|
Rename sam_i2c_slave.h to samd_i2c_slave.h
|
2015-05-17 16:50:40 -06:00 |
|
Gregory Nutt
|
89379b0a45
|
Rename sam_i2c_master.h to samd_i2c_master.h; Add saml_i2c_master.h for SAML21
|
2015-05-17 16:42:37 -06:00 |
|
Gregory Nutt
|
0745a55c03
|
SAMD/L: Move content of chip/sam_memorymap.h to chip.h; move chip/sam_pinmap. to sam_pinmap.h for consistency with other header files
|
2015-05-17 15:34:51 -06:00 |
|
Gregory Nutt
|
aa74609424
|
Rename sam_spi.h to samd_spi.h; Add saml_spi.h for the SAML21
|
2015-05-17 15:22:52 -06:00 |
|
Gregory Nutt
|
9d0db0aa4f
|
Rename sam_usart.h to samd_usart.h; add saml_usart.h for the SAML21
|
2015-05-17 14:31:21 -06:00 |
|
Gregory Nutt
|
afc650b42a
|
samd_wdt.h should include sam_sercom.h
|
2015-05-17 13:39:11 -06:00 |
|
Gregory Nutt
|
10f0ca91b9
|
Rename sam_evsys.h to samd_evsys.h; Add saml_evsys.h for the SAML21
|
2015-05-17 12:54:53 -06:00 |
|
Gregory Nutt
|
3421f6ebb3
|
Rename sam_wdt.h to samd_wdt.h; Add saml_wdt.h for SAML21
|
2015-05-17 11:01:24 -06:00 |
|
Gregory Nutt
|
2f53158588
|
Add SAML21 RSTC register definitions
|
2015-05-17 10:41:21 -06:00 |
|
Gregory Nutt
|
2a9f38ef63
|
SAML21: Add PM header file
|
2015-05-17 10:09:20 -06:00 |
|
Gregory Nutt
|
3d89476aa2
|
SAML21: Rename chip/sam_pm.h to chip/samd_pm.h
|
2015-05-17 09:18:36 -06:00 |
|
Gregory Nutt
|
469ea85654
|
Rename sam_gclk.h to samd_gclk.h. Add saml_gclk.h
|
2015-05-17 08:06:56 -06:00 |
|
Gregory Nutt
|
4648c45218
|
SAML21: Add OSC32KCTRL header file
|
2015-05-16 15:49:22 -06:00 |
|
Gregory Nutt
|
370917bb5c
|
Add SAML21 OSCCTRL definitions
|
2015-05-16 13:33:09 -06:00 |
|
Gregory Nutt
|
bfb822380b
|
SAML21: Rename sam_clockconfig.c to samd_clockconfig.c. saml_clockconfig.c forthcoming.
|
2015-05-16 13:32:12 -06:00 |
|
Gregory Nutt
|
79d3684fb4
|
Add SAML21 MCLK header file
|
2015-05-16 11:02:19 -06:00 |
|
Gregory Nutt
|
8437a63f11
|
Rename the sam_sysctrl.h header file to samd_sysctrl.h since it does not apply to the saml
|
2015-05-16 11:01:45 -06:00 |
|
Gregory Nutt
|
05c245fc2d
|
SAML21: Add pin multiplexing definitions
|
2015-05-15 11:45:56 -06:00 |
|
Gregory Nutt
|
0f1eef72fe
|
SAML21: Flesh out SAML21 memory map
|
2015-05-15 09:30:25 -06:00 |
|
Gregory Nutt
|
d2a7a1ad9c
|
SAMA5 OHCI: Fix errors introduced with blind changes to match changes to LPC17 OHCI. Fix some handling for the case where we get a falso alarm transfer completion after disconnection/cancellation
|
2015-05-15 09:02:17 -06:00 |
|
Gregory Nutt
|
95ae90a246
|
LPC17 USB host: Fix some OHCI done head handling when a tranfer is cancelled
|
2015-05-15 08:29:45 -06:00 |
|
Gregory Nutt
|
9061809e2d
|
OHCI drivers: Try disabling bulk list when cancelling bulk transfers
|
2015-05-15 07:31:13 -06:00 |
|
Gregory Nutt
|
4dc10dbe85
|
Oop.. remove duplicate #else
|
2015-05-14 14:13:43 -06:00 |
|
Gregory Nutt
|
5ba5b5e24b
|
SAML21: Add configuration logic and placeholders for memory man and pin configruation header files
|
2015-05-14 14:02:50 -06:00 |
|
Gregory Nutt
|
ec2e922d17
|
Fix a missed renaming in a Kconfig file
|
2015-05-14 12:33:42 -06:00 |
|
Gregory Nutt
|
3ec627b02d
|
Rename SAMD directories and configuration variables to SAMDL so that the same build environment can support the SAML
|
2015-05-14 12:25:09 -06:00 |
|
Gregory Nutt
|
f1c51eea57
|
SAMA5D OHCI: Missing D-Cache flush
|
2015-05-14 11:10:15 -06:00 |
|
Gregory Nutt
|
0883ea1af0
|
USB host drivers: Cannot take semaphores in cancel() method
|
2015-05-14 09:58:21 -06:00 |
|
Gregory Nutt
|
5fad63c28a
|
STM32/EFM32 USB host drivers. Remove some detritus left from previous change
|
2015-05-14 07:55:55 -06:00 |
|
Gregory Nutt
|
77e6e913bf
|
LM3S Ethernet: More semicolons needed after modified DEBUGASSERT macro. From Brennen Ashton
|
2015-05-14 06:35:40 -06:00 |
|
Gregory Nutt
|
f56260f1e1
|
Update README
|
2015-05-13 13:30:26 -06:00 |
|
Gregory Nutt
|
99734ee2ff
|
Fix several defien -> define. Thanks Pierre
|
2015-05-13 06:33:17 -06:00 |
|
Gregory Nutt
|
14d99a0ef2
|
SAMV7 TWIHS: Fix logic that performs multi-message tranfers with and without repeated starts. This change is the final piece that was required to get the maXTouch Xplained Pro workding.
|
2015-05-12 17:56:35 -06:00 |
|
Gregory Nutt
|
178321fb0e
|
KL: Fix offset to the TPM status register. From Michael Hope.
|
2015-05-12 07:08:33 -06:00 |
|
Gregory Nutt
|
10bfcaf939
|
Fix typo in arch/arm/include/kl/chip.h header file. From Michael Hope
|
2015-05-12 07:05:29 -06:00 |
|
Gregory Nutt
|
11b79e6714
|
EHCI HCDs: Check for transfer in progress before attempting cancellation
|
2015-05-11 12:12:19 -06:00 |
|
Gregory Nutt
|
c2c7dadf0f
|
The USB host cancellation now applies to all transfers and so it no longer conditional
|
2015-05-11 12:04:03 -06:00 |
|
Gregory Nutt
|
cac9879ad2
|
EHCI HCDs will now support cancellation of syncrhonous transfers
|
2015-05-11 11:43:31 -06:00 |
|
Gregory Nutt
|
3f092b8f9c
|
STM32 and EFM32 host will now support cancellation of synchronous methods
|
2015-05-11 11:15:28 -06:00 |
|
Gregory Nutt
|
102554adfe
|
OHCI HCDs will not support cancellation of syncrhonous transfers
|
2015-05-11 10:36:17 -06:00 |
|
Gregory Nutt
|
0536435ff8
|
Correct an error recently introduced in the STM32 and EFM32 USB host controller drivers.
The test for data partially transferred is incorrectec: chan->xfrd != xfrlen
Should be chan->xfrd > 0
From Ronly XLN.
|
2015-05-11 09:04:25 -06:00 |
|
Gregory Nutt
|
32a4131f92
|
Fix a cut'n'paste error in the last commit
|
2015-05-10 10:23:23 -06:00 |
|
Gregory Nutt
|
9e07b2deb1
|
OHCI: Fix length calculation in all OHCI drivers: CBP==0 means that the entire buffer was transferred, not that a null packet was tranaferred
|
2015-05-10 10:01:22 -06:00 |
|
Gregory Nutt
|
6e5a4e8b5e
|
Add EXTI line definitions for the STM32L family.
|
2015-05-09 09:03:14 -06:00 |
|
Gregory Nutt
|
4250bb5138
|
STM32 F3: Add DBGMCU register definitions for the F3 family. From Greg Meiste.
|
2015-05-09 06:05:17 -06:00 |
|