Copied spi flash files from risc-v
Removed old spiflash from make.defs
KConfig modifications for common spiflash
Added new spiflash entry to make.defs
S2 Board config update
Modifications working on S2. Need fix on ROM function
Board fixes
Deleted old spiflash files
Fixes for smartfs operation
Set new HAL version
Fixed wrong change on S3
Cache flush must be done prior to the APP cpu initalization. This,
however, must be true for the case where PSRAM is not available or
not selected. To do that, this commit flushs the cache during the
device initialization.
This commit fixes a deadlock in `esp32s3-devkit:sta_softap`
defconfig: `spin_lock_irqsave` was being used to enter a critical
section that calls `nxsem_post`. In this case, it's recommended
to use `[enter|leave]_critical_section` to avoid deadlocks when a
context switch may happen, for instance.
NuttX uses PSRAM, possibly using the APP_CPU cache MMU,
way before starting the APP_CPU in up_cpu_start().
Flushing the cache when launching the APP_CPU can cause
data corruptions on PSRAM.
Eg. mm_heap structures if the PSRAM is added to a heap.
Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
This PR configures the BL808 MMU to cache the the User Text, Data and Heap. We enable the T-Head MMU Flags for Shareable, Bufferable and Cacheable, as explained in the previous PR: https://github.com/apache/nuttx/pull/13199
This PR fixes the Slow Memory Access for NuttX Apps on Ox64 BL808 SBC: https://github.com/apache/nuttx/issues/12696. With this fix, Ox64 NuttX CoreMark jumps from 19 to 1,104. (Close to Buildroot Linux CoreMark)
Modified Files:
`arch/risc-v/Kconfig`: Enabled `ARCH_MMU_EXT_THEAD` for BL808 SoC.
In protected build mode, the syscall returns without setting correct value for the CONTROL register, which causes the userspace threads working in privileged mode after syscall.
Signed-off-by: pangzhen1 <pangzhen1@xiaomi.com>
This PR configures the T-Head MMU to cache the the User Text, Data and Heap. We enable the MMU Flags for Shareable, Bufferable and Cacheable, as explained in this article: https://lupyuen.github.io/articles/plic3#appendix-mmu-caching-for-t-head-c906
This PR fixes the Slow Memory Access for NuttX Apps on BL808 and SG2000 SoCs: https://github.com/apache/nuttx/issues/12696. With this fix, SG2000 NuttX CoreMark jumps from 21 to 2,423. (Close to SG2000 Debian CoreMark)
We introduce a Kconfig Option: `ARCH_MMU_EXT_THEAD` ("System Type > Enable T-Head MMU extension support"). Enabling this Kconfig Option will configure the T-Head MMU to cache the User Text, Data and Heap.
This PR enables the MMU cache for only SG2000 SoC (Milk-V Duo S SBC). The next PR will apply the same settings to BL808 SoC (Pine64 Ox64 SBC).
Modified Files:
`arch/risc-v/Kconfig`: Added Kconfig Option `ARCH_MMU_EXT_THEAD` that will configure the T-Head MMU. Enabled `ARCH_MMU_EXT_THEAD` for SG2000 SoC.
`arch/risc-v/src/common/riscv_mmu.h`: Set the T-Head MMU Flags (Shareable, Bufferable and Cacheable) for User Text, Data and Heap, if `ARCH_MMU_EXT_THEAD` is enabled
`arch/risc-v/src/common/riscv_addrenv.c`: Extended the MMU Flags from 32 bits to 64 bits, to accommodate the T-Head MMU Flags
`arch/risc-v/src/common/riscv_exception.c`: Extended the MMU Flags from 32 bits to 64 bit, to accommodate the T-Head MMU Flags. This code is enabled only for MMU Paging (`CONFIG_PAGING`).
Currently concerns only arm.
tools/ci/testlist/msys2.dat:
At the moment I only added the board nucleo-l152re:nsh
.github/workflows/build.yml:
Enabled cmake for msys2
since not all Armv7-m platform support double-precision floating
operations, so we add an extra option that help those specific platform
could define the single-precision floating operations.
for example, qemu-mps platform(armv7-m) support double-precision
floating operations, so we do not need to open
CONFIG_ARM_FPU_SINGLE_HARDWARE build options;
but for fc7300 platform(armv7-m) only support single-precision floating
operations, so if we pass "-fhard" build option to "ghs" compiler, then
the following instruction will be generated:
vcvt.f64.s32 d9, s18
which will fail to execute on fc7300 platform.
with "-fsingle" build option, the "ghs" compiler will generate hardware
instruction for single-precision floating operation, and generate
software instruction for double-precision floating operation.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
To support greenhill compilation, LDFLAGS removes the code that adds -T through addprefix to ARCHSCRIPT(greenhill requires a space between -T and ldscript files, but addprefix didn't do it). However,if we modified like this, when ARCHSCRIPT has more than one ldscript, the -T is only added to the first ldscript, but not to the following ldscripts, which results in a warning when linking.
To solve this problem, we can just add a space after $(SCRIPT_OPT) when using addprefix, instead of deleting addprefix.
Signed-off-by: pangzhen1 <pangzhen1@xiaomi.com>
Wait for CMDDONE in esp32s3_waitresponse even an error response is received.
Otherwise, the CMDDONE event of this command will disrupt later command.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Only in the non-critical region， nuttx can the respond to the irq and not hold the lock
When returning from the irq, there is no need to check whether the lock needs to be released
we also need keep restore_critical_section in svc call
test:
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
This is the initial version for kernel mode build on the arm64 platform.
It works much in the same way as the risc-v implementation so any
highlights can be read from there.
Features that have been tested working:
- Creating address environments
- Loading init (nsh) from elf file
- Booting to nsh
- Starting other processes from nsh
- ostest runs to completion
Features that are not tested / do not work:
- SHM / shared memory support
- Kernel memory mapping (MM_KMAP)
- fork/vfork
An example qemu target is provided as a separate patch:
tools/configure.sh qemu-armv8a:knsh
Why? Because this allows optimizing the user system call path in such
a way that the parameter registers don't have to be read from the saved
integer register context when the system call is executed.
Some hardware devices use discontinuous framebuffers, which require SIM support for simulating discontinuous framebuffers.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
There is a false positive in asan of gcc-13, we need to mask it to ensure that other parts work properly
sanitizer_common/sanitizer_common_interceptors.inc:
// FIXME: under ASan the call below may write to freed memory and corrupt
// its metadata. See
// https://github.com/google/sanitizers/issues/321.
==572161==ERROR: AddressSanitizer: dynamic-stack-buffer-overflow on address 0xed3d3f00 at pc 0xef46af64 bp 0xed3d3de8 sp 0xed3d39bc
WRITE of size 128 at 0xed3d3f00 thread T0
#0 0xef46af63 in __interceptor_pthread_sigmask ../../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:4419
#1 0x5486aa7d in up_irq_save sim/posix/sim_hostirq.c:97
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
It can only read the contents of the first buffer, so fblen should be changed to ensure that it can read the second buffer as well.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
armv7-m/arm_mpu.c: In function 'mpu_dump_region':
armv7-m/arm_mpu.c:621:13: warning: format '%X' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat=]
621 | _info("MPU-%d, alignedbase=0%08X l2size=%"PRIu32" SRD=%X"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
armv7-m/arm_mpu.c:621:13: warning: format '%X' expects argument of type 'unsigned int', but argument 6 has type 'long unsigned int' [-Wformat=]
621 | _info("MPU-%d, alignedbase=0%08X l2size=%"PRIu32" SRD=%X"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
armv7-m/arm_mpu.c:621:13: warning: format '%X' expects argument of type 'unsigned int', but argument 7 has type 'long unsigned int' [-Wformat=]
621 | _info("MPU-%d, alignedbase=0%08X l2size=%"PRIu32" SRD=%X"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
armv7-m/arm_mpu.c:621:13: warning: format '%u' expects argument of type 'unsigned int', but argument 8 has type 'long unsigned int' [-Wformat=]
621 | _info("MPU-%d, alignedbase=0%08X l2size=%"PRIu32" SRD=%X"
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Due to the xtensa mpu feature, the size of the Region depends on the Base of the next Region. e.g.
Region[1] = 0x20000000
Region[0] = 0x30000000
Then Region[1] length = Region[0] - Region[1]
So this approach is not suitable to implement the behavior of cleaning
up the Region and such a configuration will result in affecting the very beginning (the higher) Region
Therefore, to address this feature, in this change we return the Region
value and implement the ability to modify the target Region's attributes
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Modified the input parameters of mpu_initialize to require the caller to provide the number of entries in the table
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1.Modify the conditions for entering different include header files
2.Added pre-definition for _Atomic _Bool when it is missing
3.Added nuttx for stdatomic implementation. When toolchain does not support atomic, use lib/stdatomic to implement it
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. Add nuttx/atomic.h in include
2. Use nuttx/atomic.h instead of stdatomic.h in the nuttx directory
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Update internal reference to get the most updated Espressif's
libraries. Those libraries are based on branch `release/v5.1` of
the ESP-IDF and include `v5.1.4` version of it.
sim/posix/sim_alsa.c:728:24: runtime error: member
access within null pointer of type 'const struct sim_codec_ops_s'
Signed-off-by: jinxiuxu <jinxiuxu@xiaomi.com>
In a multicore task scenario, there may be a situation where the task runs on different cores at different time slices (when the task is not bound to a particular core).
When the task calls cache clean/flush(range > cache size), depending on the optimization, clean_all, flush_all are called. however, at this point, there may be dirty data or incomplete data profiles in the cache on the kernel that is running the task, which may result in dirty data being flushed into memory or make the application think that the flushed data should be successfully flushed into memory, leading to unknown consequences.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
In a multicore task scenario, there may be a situation where the task runs on different cores at different time slices (when the task is not bound to a particular core).
When the task calls cache clean/flush(range > cache size), depending on the optimization, clean_all, flush_all are called. however, at this point, there may be dirty data or incomplete data profiles in the cache on the kernel that is running the task, which may result in dirty data being flushed into memory or make the application think that the flushed data should be successfully flushed into memory, leading to unknown consequences.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Execute data and instruction sync barriers after writing MPU register,
to ensure MPU setting take effects that the new changes are seen.
testing in lm3s6965-ek:qemu-protected
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
when the vsync comes, fb drivers should call fb_vsync_pollnotify to notify POLLPRI, so that users can catch the synchronization time of vsync and do something.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
According to the current design on the armv7-a platform,
only fiq is processed in TEE, while irq and fiq are processed
in REE.
If we enable the irq function in TEE, when we process
some signal-related scenarios in TEE,
such as the ostest sighand testcase, this testcase will
call up_irq_enable() to enable irq interrupt in the
arm_sigdeliver() function. After the signal processing
logic is executed, irq will be disabled again.
During the interval of enabling irq, some external device
irq interrupts will be enabled, but these external device
irqs do not have corresponding handlers registered in TEE,
so an "unexpected irq isr exception" will be triggered.
Therefore, a better implementation is to keep the original
implementation of the up_irq_enable() function, that is,
to enable only fiq in TEE and to enable irq and fiq in REE.
Then for vendor-specific requirements, such as the need to
briefly enable irq during the TEE initialization process
and then disable irq before starting APz in TEE, we directly
provide a separate implementation of enabling irq in the
vendor, without modifying the implementation of the public
up_enable_irq() function.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
==263401==ERROR: AddressSanitizer: stack-use-after-return on address 0xf515f260 at pc 0x042434f0 bp 0x9ac24e78 sp 0x9ac24e68
WRITE of size 4 at 0xf515f260 thread T0
#0 0x42434ef in nxsem_get_value semaphore/sem_getvalue.c:65
#1 0x413110d in work_thread wqueue/kwork_thread.c:195
#2 0x412c4f6 in nxtask_start task/task_start.c:129
#3 0x427b1fc in pre_start sim/sim_initialstate.c:52
Address 0xf515f260 is located in stack of thread T0 at offset 32 in frame
#0 0x928c9e3 in host_settimer sim/posix/sim_hosttime.c:104
This frame has 1 object(s):
[32, 48) 'it' (line 105) <== Memory access at offset 32 is inside this variable
HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork
(longjmp and C++ exceptions *are* supported)
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
arch/xtensa/src/esp32s3/hardware/esp32s3_sdmmc.h|esp32s3_soc.h,
boards/xtensa/esp32s3/common/include/esp32s3_board_sdmmc.h,
boards/xtensa/esp32s3/common/src/Make.defs|esp32s3_board_sdmmc.c,
boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c: add SD/mmc driver
Support 1-bit bus width and 4-bit bus width. Support eMMC high speed SDR mode.
Support transfer data with DMA. Support SD clock frequency up to 40MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
CC: unistd/lib_setregid.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 53: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
# if NR_IRQS <= 256
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 82: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
#if NR_IRQS <= 256
CC: mount/fs_umount2.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/irq.h", line 72: warning #193-D:
zero used for undefined preprocessing identifier "NR_IRQS"
#if NR_IRQS <= 256
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
the greenhills compiler provide its own implementation of va_start,
va_end, va_arg, va_copy. so if we are build vela with greenhills
compiler, we should using the stdarg implementation provided by
greenhills, not our own
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Enabling CONFIG_PRIORITY_INHERITANCE config causes a build error
Based on Nuttx OS reserve memory for mutex struct.
Pass build based on
- CONFIG_PRIORITY_INHERITANCE y
- CONFIG_SEM_PREALLOCHOLDERS 0/8
Pass CP15_CACHE_INVALIDATE argument with r1 register to cp15_dcache_op_level.
cache level is 0(L1 D-Cache) with r0 register.
prototype:
void cp15_dcache_op_level(uint32_t level, int op)
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 252: warning #76-D:
argument to macro is empty
SP_DSB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 261: warning #76-D:
argument to macro is empty
SP_DMB();
^
"/mnt/yang/qixinwei_vela_warnings/nuttx/include/nuttx/spinlock.h", line 296: warning #76-D:
argument to macro is empty
SP_DSB();
^
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
according to armv6-m/armv7-m arch reference manual:
the three ISB {<opt>}, DSB {<opt>}, DMB {<opt>} instructions <opt>
field are defined as:
Specifies an optional limitation on the ISB/DSB/DMB operation. Allowered
values are:
Full system ISB/DSB/DMB operation, encoded as option=='1111'. Can be
omitted.
All other encodings of the options are RESERVED.
the "#opt" field of "isb #opt"
So we could remove the options field in Armv7-m platform.
The following are the build error with greenhills compiler:
CC: common/arm_exit.c [asarm] (error #2071) /tmp/gh_001h70j1.si 92: bad parameter
isb 15
------^
[asarm] (error #2071) /tmp/gh_001h70j1.si 112: bad parameter
isb 15
------^
[asarm] (error) errors during processing
According to armv8-m arch reference manual:
the ISB/DMB instruction's "opt" encoding rule is same as
armv6-m/armv7-m, but the "DSB" instruction is different, in armv8-m, the
"DSB {<opt>}" field has two valid encoding options: 0b0000, 0b0100.
and all other encoding options are reserved.
In Armv7-a/Armv8-a, the dsb/dmb option field has 8 valid state value.
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
The following are the compile error that reported
by GreenHills compiler:
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 156 (col. 17): error #2036-D:
cannot allocate "reg0" to specified caller-saved register
"/mnt/yang/qixinwei_commit/nuttx/include/arch/syscall.h", line 157 (col. 17): error #2036-D:
cannot allocate "reg1" to specified caller-saved register
Then we fix this greenhills compilation error by explicitly specifying
the registers in the clobber list in the inline assembly code.
This fix is successful in compiling on the
nuttx/boards/arm/mps/mps2-an500/configs/nsh platform and passes
the ostest test.
However, if we keep the implementation the same for both the default
and Greenhills compilers, the default compiler will report the
following two issues:
1. the "sys_call6" function will report compile error when
compiling on "./vendor/qemu/boards/smartspeaker/configs/smartspeaker-knsh"
platform, the detailed error info:
CC: proxies/PROXY_mq_getattr.c In file included from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/sys/syscall.h:35,
from /home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/syscall.h:30,
from proxies/PROXY_mmap.c:5:
In function 'sys_call6',
inlined from 'mmap' at proxies/PROXY_mmap.c:9:22:
/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/syscall.h:297:3: error: 'asm' operand has impossible constraints
297 | __asm__ __volatile__
| ^~~~~~~
2. when running on qemu-armv7-a platform, the modification to
"smh_call()" function will make the system fail to boot up, so
we need to keep the default compiler implementation and greenhills
compiler implementation separate
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
(cherry picked from commit cb48b749b1c9cad8cfb96bff7c5e9b6ebf20fc8a)
Some multicore RV chips (mpfs, jh7110 etc) have hart clusters
and globally numbered mhartids. Clusters with single hart or
SMP support can be managed by one NuttX instance. Currently
NuttX expects to use cluster-local ids.
This allows us to get local ids by offsetting mhartids with a
base value.
Note that there are chips (e.g. k230) that use cluster-local
ids directly, so this is not needed for them.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
1. For some reasons, the bootloader will set CPU source to BBPLL and enable it,
but there are calibration issues, so we need turn off the BBPLL and do calibration again to fix the issue.
2. Corresponding issue link: 89cc9084ab
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
This generalizes the in-kernel syscall approach from KERNEL mode to
all build modes so that to unify in-kernel syscall invocations. As
a result, machine mode ECALL and the supervisor folder are no longer
needed.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This commit adds missing add_link_options to specify sanitizers
also during linking stage.
Signed-off-by: Daniel Jasinski <jasinskidaniel95szcz@gmail.com>
When executing fork() via a system call, the parent's stack gets corrupted
by the child, as during exception return the child loads the parent's
stack pointer from the context save area.
This happens because the full parent stack (including what has been pushed
during the system call) is copied to the child. What should be copied, is
only the user stack of the parent (the kernel stack is not interesting).
Fix this by only copying the parent's user stack to the child; and make
the child return directly to userspace (not via dispatch_syscall).
Simplifies the implementation of dispatch_syscall, making it easier to
understand and maintain. Let the C-compiler do most of the work, instead
of doing everything as inline assembly.
This adds the necessary defines to set the USARTs' kernel clock source
selection.
This is required for a configuration where the bootloader (running
before NuttX) changes the USARTs' clock selection, so they need to be
restored on board init.
This is according to the reference manual RM0399 page 448.
Create version.h
chip/intel64_irq.c:78:34: error: conflicting type qualifiers for ‘g_irq_spin’
78 | static spinlock_t g_irq_spin;
| ^~~~~~~~~~
In file included from chip/intel64_irq.c:40:
include/nuttx/spinlock.h:168:28: note: previous declaration of ‘g_irq_spin’ with type ‘spinlock_t’ {aka ‘volatile unsigned char’}
168 | extern volatile spinlock_t g_irq_spin;
| ^~~~~~~~~~
chip/intel64_cpu.c: In function ‘x86_64_cpu_ready_set’:
chip/intel64_cpu.c:314:3: warning: implicit declaration of function ‘spin_lock’ [-Wimplicit-function-declaration]
314 | spin_lock(&g_ap_boot);
| ^~~~~~~~~
chip/intel64_cpu.c:322:3: warning: implicit declaration of function ‘spin_unlock’; did you mean ‘sched_unlock’? [-Wimplicit-function-declaration]
322 | spin_unlock(&g_ap_boot);
| ^~~~~~~~~~~
Signed-off-by: chao an <anchao@lixiang.com>
This revises PROTECTED build for qemu-rv mainly to avoid hard-coded
addresses in linker scripts. It also added rv32 support, cleaned up
config `pnsh64` and added config `pnsh`.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adds explicit `void mm_free_delaylist(heap)` interface so that
to force freeing the heap's delaylist.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adds NuttSBI support for rv-virt device so that to enable CI
checks for NuttSBI later. It allows using `-bios nuttx` option to
run NuttX with QEMU v6.2 w/o OpenSBI.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adjusts sbi_start behavior so that if SBI late initialization hook
is defined, PMP setting is assumed to be fully done in the hook, because
the default PMP operation may fail for various reasons such as lacking
free entries or the default setting doesn't work on devices like QEMU
v6.2.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
These symbols only used in esp_spi.c and too simple
to conflict with others, so mark them as static:
- cfg
- ctx
- dev_cfg
- timing_param
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Fixes regression from https://github.com/apache/nuttx/pull/12220
Error: chip/k230_start.c:80:13: error: 'k230_copy_init_data' defined but not used [-Werror=unused-function]
80 | static void k230_copy_init_data(void)
| ^~~~~~~~~~~~~~~~~~~
HPET can be used as system clock for x86_64
to set HPET as system clock you have to enable:
CONFIG_ONESHOT=y
CONFIG_ALARM_ARCH=y
CONFIG_INTEL64_ONESHOT=y
CONFIG_ARCH_INTEL64_HPET_ALARM=y
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Other ESP32-S3 modules (with embedded flash and PSRAM) were added.
Also, the `help` section of the Kconfig was updated to better
describe the modules' flash and PSRAM sizes.
Steppoint can be implemented by icount(instruction count)
from RISC-V debug extension, but it may not implemented in all RISC-V cores.
Unfortunately, the currently supported RISC-V cores do not implement it.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Provide `up_copy_section` function that enables copying data using
the data bus. If the memory destination address is accessible
through the instruction bus, the data is copied using the
correspondent address accessible through the data bus.
rename _rdtsc macro to rdtsc to avoid conflict with external code
rename rdtsc macro to rdtscp to be the same as asm instruction used
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
The buffer initialization function (`i2s_buf_initialize`) calls
`i2s_buf_free`, which performs buffer initialization within a
critical section (`spin_lock_irqsave`). If this function is called
under the same critical section (same spinlock), initialization
will hang.
This change implements a driver for the two watchdog timers on the BL808, and enables it as part of the timer config. The driver is based on the GP timer driver.
arch/xtensa: add support for capture driver on ESP32 and ESP32|S3|
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Review fixes
arch/xtensa: add support for fault signal on motor control
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Got responsive fault indicator
Working brakes - still need to work on starting isr
Fixed single-time ISR initializiation
Working soft brake on fault
Improved KConfig for BDC and BLDC
Kconfig fixed at board level
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
This fixes the always zero time in NuttSBI case as the `error` field
contains the correct timestamp. This in turn also fixes the block of
`up_udelay()` which further leads to boot failure of `canmv230:master`
config.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Correctly releasing channels after using QSPI is crucial
to prevent issues caused by multiple requests that may lead
to DMA channel resource conflicts.
The common `up_allocate_heap` is a strong symbol, which leads to
error when building with CONFIG_DEBUG_LINK_WHOLE_ARCHIVE. Make
`up_allocate_heap` weak function to mitigate this problem.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
This PR configures the BL808 and SG2000 MMU (inside T-Head C906) to cache the the Kernel Text, Data and Heap. We set the MMU Flags (Shareable, Bufferable and Cacheable) as explained in this article: https://lupyuen.github.io/articles/plic3#appendix-mmu-caching-for-t-head-c906
This PR fixes the Slow Memory Access for NuttX Kernel in BL808 and SG2000: https://github.com/apache/nuttx/issues/12696
In the next PR, we will fix the Slow Memory Access for NuttX Apps, by caching the User Text and Data.
arch/risc-v/src/bl808/bl808_mm_init.c: Added MMU Flags (Shareable, Bufferable and Cacheable) for BL808 Kernel Text, Data and Heap
arch/risc-v/src/sg2000/sg2000_mm_init.c: Added MMU Flags (Shareable, Bufferable and Cacheable) for SG2000 Kernel Text, Data and Heap
This fixes stack pointer restore logic to avoid parent stack corruption
by forked child in PROTECTED build.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This fixes `tp` value of forked child in PROTECTED build to support
vfork. Why? the optimized `dispatch_syscall` requires `tp` to hold
the task TCB since commit e6973c764c.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
tc3xx/tc3xx_timerisr.c: In function ‘up_timer_initialize’:
tc3xx/tc3xx_timerisr.c:58:39: warning: passing argument 1 of ‘tricore_systimer_initialize’ discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
58 | lower = tricore_systimer_initialize(&MODULE_STM0, 192, SCU_FREQUENCY);
In file included from tc3xx/tc3xx_timerisr.c:31:
nuttx/arch/tricore/src/common/tricore_internal.h:252:35: note: expected ‘void *’ but argument is of type ‘volatile Ifx_STM *’ {aka ‘volatile struct _Ifx_STM *’}
252 | tricore_systimer_initialize(void *tbase, int irq, uint64_t freq);
| ~~~~~~^~~~~
tc3xx/tc3xx_serial.c:177:16: warning: initialization discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
177 | .uartbase = &MODULE_ASCLIN0,
| ^
tc3xx/tc3xx_serial.c:178:16: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
178 | .pins = &g_uart0_pins,
| ^
common/tricore_trapcall.c: In function ‘tricore_trapcall’:
common/tricore_trapcall.c:66:3: warning: passing argument 4 of ‘_assert’ discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
66 | PANIC_WITH_REGS("Trap", CURRENT_REGS);
| ^~~~~~~~~~~~~~~
In file included from common/tricore_trapcall.c:29:
nuttx/include/assert.h:189:45: note: expected ‘void *’ but argument is of type ‘volatile uintptr_t *’ {aka ‘volatile long unsigned int *’}
189 | FAR const char *msg, FAR void *regs);
Signed-off-by: chao an <anchao@lixiang.com>
This fixes the following issue when configuring canmv230:master
with Ubuntu stock toolchain and cmake 3.22:
```
CMake Error at .../arch/risc-v/src/cmake/Toolchain.cmake:218 (if):
if given arguments:
"STREQUAL" "GNU_RVG"
Unknown arguments specified
```
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This revises canm230:pnsh in a few ways:
- adjusting linker scripts structure,
- asserting PMP setting results,
- adjusting configs for both k230d and k230 devices.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
The following warnings is fixed:
chip/sam_pwm.c:961:12: warning: unused variable 'regval' [-Wunused-variable]
961 | uint32_t regval;
chip/sam_serial.c: In function 'sam_dma_txavailable':
chip/sam_serial.c:2264:7: warning: unused variable 'rv' [-Wunused-variable]
2264 | int rv;
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Larger RX/TX buffers might be required for both FD and FD_BSW modes.
Default bit timing values are also changed since the original ones
did not provide correct results for default SAMv7 board clock selection
(150 MHz clock frequency). The current values provide correct bit timing
with sample point as close to 87.5 %.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This adds field type to canioc_bittiming_s structure that allows
to set/obtain bit timing for both CAN CC and CAN FD.
CANIOC_GET_BITTIMING is now bidirectional: user specifies type field
and gets other fields from the controller.
The commit also updates current CAN FD capable controllers using the
ioctl. The type is not checked for classical CAN only controllers
and nominal bit timing is returned regardless of type value.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This adds enablers for setting various clocks to some default
values. Also, this provides helpers to grant nonsecure access
to a number of clocks. Bootloader may utilize these to make
the system boot in a deterministic manner.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
X0 is always 0 but still should be transfered to the client, but it don't existed in thread context, use any other register for it, and its value will be omitted by gdb client.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The link script of NuttX Simulator is generated through compilation
options. This PR will support configure special data sections in
kconfig to meet the support of 3rd party applications.
we need to follow the syntax of linker script. In 3rd-party applications, some data will be labeled as section:
| a.c:
| struct task_s a __attribute__((section(".data.custom.taska")));
| b.c:
| struct task_s b __attribute__((section(".data.custom.taskb")));
Data of the same type struct can be placed in a fixed location to reduce the overhead caused by searching:
| .data :
| {
| _custom_data_table_start = .;
| KEEP(*(.data.custom.*))
| _custom_data_table_end = .;
| }
Such section declare can be configured via Kconfig in the PR:
| CONFIG_SIM_CUSTOM_DATA_SECTION=" .data : { _custom_data_table_start = .; KEEP(*(.data.custom.*)) _custom_data_table_end = .; } "
Signed-off-by: chao an <anchao@lixiang.com>
In the algorithm there is a subtraction (int - unsigned), which results (potentially overflowed)
unsigned.
Passing this to macro ABS and the assigning to int doesn't work ( unsigned is always >= 0 ).
Fix this by replacing (dangerous) ABS macro with stdlib's standard "int abs(int)"
and change the substraction to (int - int).
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is an initial FlexSPI SPI NOR MTD driver for IMX9
This supprts M25P SPI NOR on FlexSPI for now, and can later be extended to other
SPINOR devices if needed. The following configurations are needed to use this driver:
CONFIG_IMX9_FLEXSPI_NOR=y
CONFIG_MTD_M25P=y
In addition, board initialization logic needs to call the imx9_flexspi_nor_initialize
to receive a pointer to the mtd device.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Co-authored-by: Jouni Ukkonen <jouni.ukkonen@unikie.com>
This commit implements a character driver for the general purpose ADC of the BL808, based on the hardware scanning functionality. The driver supports setting different conversion resolutions and the order of channels to be scanned via menuconfig.
Following warnings were caused by incorrect naming of few defines.
chip/sam_mcan.c:415:7: warning: "MCAN1_NTSEG1" is not defined, evaluates to 0 [-Wundef]
415 | # if MCAN1_NTSEG1 > 63
| ^~~~~~~~~~~~
chip/sam_mcan.c:418:7: warning: "MCAN1_NTSEG2" is not defined, evaluates to 0 [-Wundef]
418 | # if MCAN1_NTSEG2 > 15
| ^~~~~~~~~~~~
chip/sam_mcan.c:421:7: warning: "MCAN1_NSJW" is not defined, evaluates to 0 [-Wundef]
421 | # if MCAN1_NSJW > 15
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This compilation flag was added in the same way as done for esp32
in order to avoid unexpected behaviors when accessing registers
using struct bitfields.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
Move and unify map_rom_segments function called when starting
Simple Boot and MCUboot compatible images.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
sometimes ubsan work with asan trigger a mistake report, make it
possible to export library with ubsan, and bypass runtime feature.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
