Gregory Nutt
2913aac866
Eliminate warnings
2015-09-08 10:20:41 -06:00
Gregory Nutt
e354853776
Elminiate some warnings
2015-09-08 09:18:59 -06:00
Gregory Nutt
d8c83218fe
Eliminate warnings
2015-09-08 08:27:34 -06:00
Gregory Nutt
7065f78b92
Eliminate a warning
2015-09-08 08:18:01 -06:00
Gregory Nutt
cfd41bdb30
STM32: Eliminate some warnings
2015-09-07 16:25:54 -06:00
Ilya Averyanov
560613622d
EHCI: We not need disable and enable async scheduler when
2015-09-07 13:44:56 -06:00
Ilya Averyanov
8cc83fa6dc
EHCI: Fix qh_ioccheck to move bp to next QH
2015-09-07 13:42:39 -06:00
Ilya Averyanov
6799bba3c1
EHCI: Rename asynch_setup to ioc_async_setup
2015-09-07 13:36:52 -06:00
Gregory Nutt
f3af146d44
SAMV7 QSPI: Back out part of last change; byte access are necessary. Correct write to the IAR register
2015-09-06 11:24:43 -06:00
Gregory Nutt
26eada3446
In all up_initialize() functions, automatically initialize TUN driver is so configureded
2015-09-06 09:35:29 -06:00
Gregory Nutt
b30e6a696e
SAMV71 QSPI: Add methods to allocate properly aligned memory.
2015-09-06 09:34:51 -06:00
Gregory Nutt
da3c05a898
Minor changes from review of merge
2015-09-06 07:10:21 -06:00
pnb
55dcbb4ca2
efm32 addons missing file
2015-09-06 13:10:41 +02:00
Gregory Nutt
9d5f04cd45
Remove some crap from the SAMA5D2 memory map header file
2015-09-05 12:43:34 -06:00
Gregory Nutt
6488fe469d
SAMA5D Kconfig: SAMA5D2 has P310 L2 cache
2015-09-05 12:15:50 -06:00
Gregory Nutt
975d912b40
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:37 -06:00
Gregory Nutt
2ed09233d3
Changes to conform to coding standard.
2015-09-05 07:50:02 -06:00
Gregory Nutt
60d444cd69
Changes to conform to coding standard. Also, I assume references to STM32 should be EFM32?
2015-09-05 07:33:50 -06:00
Gregory Nutt
e714cd748c
Changes to conform to coding standard. Also, I assume references to STM32 should be EFM32?
2015-09-05 07:31:16 -06:00
pnb
1314f60caf
start of adc for efm32
2015-09-05 10:51:33 +02:00
Pierre-noel Bouteville
85b1638171
Merged nuttx/arch into master
2015-09-05 10:42:12 +02:00
pnb
c327cce0b8
add bitband support
2015-09-05 10:40:34 +02:00
pnb
c83d533d90
add flash read/write support
2015-09-05 10:37:53 +02:00
pnb
3c35458ac2
fix some I2C problem
2015-09-05 10:22:08 +02:00
pnb
ea596e45d3
add efm32_gpioirqclear
2015-09-05 10:20:24 +02:00
pnb
ed8531a53b
GPIO fix bug GPIO_DRIVE_... definition
2015-09-05 10:17:05 +02:00
pnb
9564f878a9
set Gpio drive only if not standard
2015-09-05 10:15:42 +02:00
pnb
fa65bef573
commetic
2015-09-05 10:11:06 +02:00
Gregory Nutt
544ed7cdbd
Purely cosmetic changes from code review
2015-09-04 16:36:43 -06:00
Gregory Nutt
804570f831
Merged in david_s5/arch/upstream_stm32_flash (pull request #11 )
...
Added suport for overriding the STM32 flash size. To allow the use of STM32F2 and STM32F4 devices with F, G, I flash designations
2015-09-04 16:25:03 -06:00
David Sidrane
9c13fa3f67
Added suport for overriding the STM32 flash size. To allow the use of STM32F2 and STM32F4 devices with F, G, I flash designations
2015-09-04 10:26:09 -10:00
Gregory Nutt
831272cd35
SAMA5D2: Add memory map file
2015-09-02 13:04:01 -06:00
Gregory Nutt
aff3dbda88
Remove one more unused reference to PCLKSEL
2015-09-02 09:16:04 -06:00
Gregory Nutt
cace0003f2
LPC43: Removed references to non-existent PCOMP and PCLKSEL registers in comments
2015-09-02 09:07:38 -06:00
Ilya Averyanov
f2e1fb7ea2
LPC43xx: Fix build with FPU enabled
2015-09-02 09:03:10 -06:00
Ilya Averyanov
a3bc46f629
LPC43xx: Add Ethernet support. From Ilya Averyanov
2015-09-02 09:01:41 -06:00
Ilya Averyanov
fdfaf9aa09
lpc43xx: Spi make work
2015-09-02 08:31:08 -06:00
Ilya Averyanov
f2b5f05124
STM32 Ethernet: stm32_ifdown() prototyped twice
2015-09-02 08:23:45 -06:00
Gregory Nutt
5a9f1fa3ab
Extension memory map inclusion for SAMA5D2
2015-09-02 08:23:44 -06:00
Gregory Nutt
075b66d4bb
Eliminate a warning
2015-09-01 13:35:38 -06:00
Gregory Nutt
8c9f7e5ab6
Add peripheral clock macros for the SAMA5D2
2015-09-01 13:08:48 -06:00
Gregory Nutt
f6d8a03b55
Merged in paulpatience/nuttx-arch (pull request #10 )
...
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.
2015-09-01 12:31:05 -06:00
Paul A. Patience
a0dc724a5d
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.
2015-09-01 13:47:06 -04:00
Ilya Averyanov
98788063f1
Fix warning in Kconfig file introduced with first SAMA5D2 commit. From Ilya Averyanov.
2015-09-01 11:23:08 -06:00
Gregory Nutt
ed3d6fc7a0
SAMV7 QSPI: Delays need to be in units of nsec, not usec. Default delays should be 0 nsec
2015-09-01 11:16:09 -06:00
Ilya Averyanov
8c52786395
LPC43xx: Fix missing #define in eeprom. From Ilya Averyanov
2015-09-01 08:08:09 -06:00
Ilya Averyanov
675878b360
PC43xx: Fix NVIC_SYSH_PRIORITY_STEP define
2015-09-01 08:06:34 -06:00
Gregory Nutt
c33efa0a60
SAMA5D2: Add chip definitions, PIDs, and IRQ definitions
2015-08-31 15:19:01 -06:00
Gregory Nutt
9ba349f2b8
SAMV71 QSPI: Fix frequency calculation. Need to use ceil() type logic so that requested frequency is not exceeded
2015-08-31 10:18:17 -06:00
Gregory Nutt
4f87a71e6d
SAMV7 QSPI: Use of CPHA in mode settings was inverted
2015-08-31 10:05:41 -06:00
Gregory Nutt
4b738ba7cc
SAMV7 QSPI: Fix some compiler problems when SPI debug is enabled
2015-08-31 08:57:30 -06:00
Gregory Nutt
70f1a49fbe
arch/arm/src/up_iternal.h and several ARM Make.defs files: In the original implementation, NOT defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine if lazy floating point register saving was being used. But recents changes added common lazy register as well so now that test must be (NOT defined(CONFIG_ARMV7M_CMNVECTOR) || defined(CONFIG_ARMV7M_LAZYFPU)).
2015-08-31 08:40:02 -06:00
Gregory Nutt
b6515bbd4d
SAMV71 QSPI: Changes resulting removing of clocking
2015-08-29 18:53:27 -06:00
Gregory Nutt
b94eef2f19
SAMV71 QSPI: Driver is code complete
2015-08-29 15:57:20 -06:00
Gregory Nutt
3877cb09d9
Trivial renaming
2015-08-29 10:04:36 -06:00
Gregory Nutt
b887d39d2e
SAMV7 QSPI: Add DMA transfer support
2015-08-29 10:02:59 -06:00
Gregory Nutt
0b1bd46e24
SAMV71 QSPI: Add support for dual and quad data transfers and dummy read cycles
2015-08-28 11:58:19 -06:00
Gregory Nutt
3e0affba86
SAMV71 QSPI: Add support for non-DMA memory transfers
2015-08-28 10:13:46 -06:00
Gregory Nutt
8aefb9d139
SAMV71 QSPI: Redesign some functions to better matched new interface definition
2015-08-27 14:15:23 -06:00
Gregory Nutt
71bbe5b48d
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-27 12:08:04 -06:00
Gregory Nutt
926f3aa9af
Update some comments
2015-08-27 08:19:26 -06:00
Gregory Nutt
45a6f79eeb
SAMV71 QSPI: Flesh out most of the initialization logic
2015-08-26 14:15:40 -06:00
Gregory Nutt
768aba20ad
SAMV71 QSPI: Use new QSPI interface. Can't use SPI interface as planned; the hardware architectue is too different
2015-08-25 15:23:59 -06:00
Gregory Nutt
01cfe8c315
Networking: Move where the local loopback device is initialized from board_app_intiialize() to up_intiialize() so that it will happen automatically
2015-08-24 14:25:49 -06:00
David Sidrane
98ce2b2912
Fixed Mask and made configuration macros consistant
2015-08-24 08:56:24 -10:00
David Sidrane
b95c642a88
Added Kconfig Enable Support for SAI and I2S PLL
2015-08-24 08:55:45 -10:00
Gregory Nutt
bddc4dbd6a
LPC17: Fix RAM vector table alignment for the LPC17 family. The ARMv7-M TRM only requires 128-byte alignment for vector tables; the LPC17, however, requires 256 byte alignment
2015-08-23 17:17:14 -06:00
Gregory Nutt
065f2d6057
SAMV7 USBHS DCD: Add logic to detect high speed mode; use DEBUGASSERT to check input parameters
2015-08-22 08:58:38 -06:00
David Sidrane
6559c8994a
Remove the word NOT - that was used to test the fix.
2015-08-21 18:51:28 -06:00
David Sidrane
390c777a2a
Removed the word NOT - that was used to test the fix.
2015-08-21 18:40:20 -06:00
Pavel Pisa
2fafe1c817
arch/arm/src/lpc17: Actually implement options to use external SDRAM and or SRAM for the heap. From Pavel Pisa
2015-08-21 18:28:59 -06:00
Gregory Nutt
4c0d36740d
Some of the last review chnages were still in the editor
2015-08-21 18:25:10 -06:00
Gregory Nutt
9a32e907df
Trivial, cosmetic changes from review of merge
2015-08-21 18:22:57 -06:00
Gregory Nutt
4e347080e6
Update comments in Kconfig file
2015-08-21 18:15:09 -06:00
Gregory Nutt
16c5be9767
Merged in david_s5/arch/upstream_446 (pull request #7 )
...
Upstream_446
2015-08-21 18:11:05 -06:00
David Sidrane
9d64050d68
Added Changes to support for the new USB OTG controller for F446 register map
2015-08-21 13:57:08 -10:00
David Sidrane
7c96342c63
Break the stm32_otg.h into an stm32fxxxxx and stm32f44xx (should work on F7) versions
2015-08-21 13:55:06 -10:00
David Sidrane
5d1ff3f7e1
Use read modify write on PLL and CFG registers
2015-08-21 13:22:09 -10:00
David Sidrane
1c746edceb
Added PLL P constants
2015-08-21 13:20:16 -10:00
Gregory Nutt
972f67ce42
SAMV7 QSPI: Add framework for a QSPI driver. Initial commit is just the SPI driver with some name changes
2015-08-21 14:22:47 -06:00
Gregory Nutt
f6c6723d88
SAMV7 USBHS Device: After aligning DMA buffers and disabling write-back data cache, the DCD driver is fully functional using the CDC/ACM device
2015-08-21 12:30:29 -06:00
Gregory Nutt
da6c5aabdf
All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa
2015-08-21 08:42:24 -06:00
Gregory Nutt
0b3b104b74
Remove unnecessary step in previous commit
2015-08-20 16:21:45 -06:00
Pavel Pisa
387f76d455
This fix allows to run NuttX from SRAM or to place it after bootloader when run from Flash. From Pavel Pisa
2015-08-20 07:46:18 -06:00
Gregory Nutt
5196a4183c
SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address
2015-08-19 11:36:38 -06:00
Gregory Nutt
0db7ac92d9
Minor coding style fixes in last commit; remove some unneeded debug output
2015-08-19 07:54:46 -06:00
SaeHie Park
75626fb071
STM32: Fix eth mem leak in recvframe
2015-08-19 15:40:04 +09:00
Gregory Nutt
cfd4f943da
SAMV7 MCAN: When bitrate is changed, the MCAN has to be reset and there are lots of issues related to getting back to a healthy state if there is multithreaded access to the MCAN device. This commit handles a few of those issues, but there are more
2015-08-18 11:56:07 -06:00
Gregory Nutt
4b96605f93
SAMV7 MAN: Add support for bit timing IOCTL commands
2015-08-18 11:20:22 -06:00
Gregory Nutt
ff84e67e59
SAMV7 MCAN: Add logic to report CAN errors
2015-08-18 08:48:13 -06:00
Gregory Nutt
b7d6720a23
All CAN drivers: Set the new error indication to zero in the CAN message report
2015-08-18 07:24:12 -06:00
Gregory Nutt
c01d3298e5
Merged in paulpatience/nuttx-arch (pull request #5 )
...
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, STM32F303RD, and STM32F303RE devices.
2015-08-17 12:55:32 -06:00
Paul A. Patience
c800841632
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6,
...
STM32F303C8, STM32F303RD, and STM32F303RE devices.
2015-08-17 14:00:49 -04:00
Gregory Nutt
531456d20c
Fix deadlock when closing the MCAN device driver
2015-08-17 11:49:20 -06:00
Gregory Nutt
4f122d5290
SAMV71 MCAN: Default clock source should be MCK, not MAIN
2015-08-17 11:03:15 -06:00
Gregory Nutt
ff38abf580
SAMV7 MCAN: Should support standard CAN IDs in extended ID mode
2015-08-17 10:52:58 -06:00
Gregory Nutt
ba6c0b3fa3
Fix more common typos
2015-08-16 11:06:29 -06:00
Gregory Nutt
e29220183a
Fix some common typos
2015-08-16 10:59:10 -06:00
Gregory Nutt
9e5e91c204
SAMV7 USBHS device: Fix backward test of TXINIT. Driver now appears to be functional
2015-08-16 08:55:44 -06:00
Gregory Nutt
b503bf6ca1
SAMV7 USB device: Fix base address of USBHS RAM; remove a bad assertion; fix clearing of endpoint interrupts
2015-08-15 13:00:32 -06:00
Gregory Nutt
9d7301f474
SAMV7 USBHS device: Need to enable endpoint before configuring it; Check for USB suspended backward
2015-08-15 10:41:15 -06:00
Gregory Nutt
651317ee49
SAML21: Various SERCOM fixes
2015-08-14 18:11:02 -06:00
Gregory Nutt
348060f5d2
SAMV7: Add QSPI Register Definition Header File
2015-08-14 18:11:01 -06:00
Gregory Nutt
150f79a198
Backout commit e03b47b6e28ca98a6cc8497ad822309de5153eb3
2015-08-14 10:24:56 -06:00
Gregory Nutt
a44a208ff6
SAMV71 MCAN: Change Kconfig so that zero is no longer the default value for the size of RXFIFO0, RXFIFO1, and TXFIFIQ. In fact, zero is not an illegal value
2015-08-13 08:13:49 -06:00
Gregory Nutt
bef5eb0bc9
Fix a typo in a preprocessor warning
2015-08-12 15:32:46 -06:00
Gregory Nutt
b9d4ead73f
SAMV7 MCAN: Correct usage of PCLK prescaler. From Frank Benkert
2015-08-12 11:17:03 -06:00
Gregory Nutt
53638b10dc
SAMV7 USBHS device: Modify how ATTACH is performed if the use host has already reset
2015-08-12 11:13:18 -06:00
Gregory Nutt
68932c02d3
Fix typos in SAMV7 MCAN. From Frank Benkert
2015-08-12 08:17:50 -06:00
Gregory Nutt
2264c1fa64
SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled
2015-08-11 15:48:26 -06:00
Gregory Nutt
f3d1c19965
SAMV7 SPI slave: Loop in the interrupt handler; RDRF and TXNE events should occur very closely in time
2015-08-11 09:30:24 -06:00
Gregory Nutt
27733a6731
Trivial spacing change
2015-08-11 07:51:31 -06:00
Gregory Nutt
9f4e033f4c
MoxART: Trivial changes from code review
2015-08-10 11:05:09 -06:00
Gregory Nutt
8de9d3f014
Merged in rnouse/nuttx-arch (pull request #4 )
...
Add Shared IRQ support for UART w/multi port.
2015-08-10 10:11:43 -06:00
Gregory Nutt
c8c470271f
SAMV7 SPI Slave: Completes implementation basic, no-DMA driver
2015-08-10 10:05:00 -06:00
Anton D. Kachalov
f10b7ff09a
Merge branch 'master' of https://bitbucket.org/nuttx/arch
2015-08-10 18:14:49 +03:00
Anton D. Kachalov
46444388fa
Add Shared IRQ support for UART w/multi port.
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-10 18:13:35 +03:00
Gregory Nutt
c7b0a35e85
Rename sam_spi_slave_initialize to up_spi_slave_initialize for better symmety with the Master SPI interface definition
2015-08-09 17:41:55 -06:00
Gregory Nutt
ec68d00ed8
A few more cosmetic changes to the SAMV7 SPI slave driver-in-progress
2015-08-09 16:21:49 -06:00
Gregory Nutt
1fbd5351ff
Fix typo in a Kconfig file
2015-08-09 15:50:04 -06:00
Gregory Nutt
c7eaa00ed4
SAMV7 SPI slave: Add output queuing and interrupt handling
2015-08-09 15:42:32 -06:00
Gregory Nutt
5f4224115a
SAMV7 SPI Slave: Add a basic driver framework for SPI slave. Still a lot of missing logic
2015-08-09 12:04:43 -06:00
Gregory Nutt
7e7150899a
SAMV7: Add configuration options to select SPI slave (slave driver not yet committed)
2015-08-09 09:47:06 -06:00
Gregory Nutt
05aae51c89
SAMV7 MCAN: Lock the scheduler at one critical point to avoid a possible race condition
2015-08-09 08:41:57 -06:00
Gregory Nutt
7a6bdf286e
SAMV7 MCAN: Add some precautions to assue that a counting semaphore does not get out of synch
2015-08-08 08:38:52 -06:00
Gregory Nutt
a7a52252a8
SAMV7 MCAN: Fix DCACHE configuration dependency; Mkae sure DMA buffers are aligned to the cache line size at the end, Make RX FIFO1 the high priority FIFO and it it preference for RX input
2015-08-07 12:31:01 -06:00
Gregory Nutt
75ce247ed1
Use message sized defined in can.h
2015-08-07 09:01:30 -06:00
Gregory Nutt
aea94d9525
SAMV7 MCAN: Add support for all filter modes
2015-08-07 08:23:21 -06:00
Gregory Nutt
955202b895
Grr.. typos crept in during the last minute clean-up of the previous fix 8(
2015-08-06 12:50:11 -06:00
Gregory Nutt
32900bdb0b
SAMV71 MCAN: Fix standard ID mask
2015-08-06 12:47:14 -06:00
Gregory Nutt
f7bcff3d12
SAMV7 MCAN: Fix filter configuration when now filters are defined. We need to accept all messages in this case
2015-08-06 11:50:41 -06:00
Gregory Nutt
86f7a58954
SAMV7 MCAN: some fixes from early testing
2015-08-06 10:24:31 -06:00
Gregory Nutt
73a96ab078
Update some function headers
2015-08-05 16:22:10 -06:00
Gregory Nutt
983df071c3
STM32V7 MCAN: CAN FD mode depends on support from the upper half driver, so it is now global CAN configuration
2015-08-05 13:55:20 -06:00
Gregory Nutt
bb47c7f80e
SAMV7 MCAH: Add support for IOCTL commands that manage filters
2015-08-05 12:59:29 -06:00
Gregory Nutt
d824223736
SAMV7 MCAN: Fix uninialize configuration value
2015-08-05 09:16:16 -06:00
Gregory Nutt
ba23314cbf
Merge remote-tracking branch 'origin/master' into mcan
2015-08-05 08:57:29 -06:00
Gregory Nutt
f986d08515
SAMV71: Fix error in GPIO interrupt numbering
2015-08-05 08:57:05 -06:00
Gregory Nutt
4db9f276e6
SAMV7 MCAN: Fix some compilation errors when CAN debug is enabled
2015-08-05 08:21:32 -06:00
Gregory Nutt
92f5bf01c3
SAMV7 MCAN: Correct some compile errors when only MCAN1 is enabled
2015-08-05 08:07:25 -06:00
Gregory Nutt
1a93dadf26
SAMV7 MCAN: Fix some compilation warnings (some of which are real coding errors).
2015-08-05 07:29:20 -06:00
Gregory Nutt
c30cfe2025
SAMV7 MCAN driver is code complete (with some missing functionality)
2015-08-05 07:09:29 -06:00
Gregory Nutt
c8923bb6fc
SAMV7 MCAN: Finish some TX FIFO status methods; Correct interpretation of DLC in CAN_FD mode
2015-08-04 17:19:47 -06:00
Gregory Nutt
a64398c86b
SAMV7 MCAN: Minor correcting to message size calculation
2015-08-04 14:05:07 -06:00
Gregory Nutt
bb32aa8d24
SAMV7 MAN: Flesh out interrupt logic; add RX message handling logic
2015-08-04 13:51:34 -06:00
Gregory Nutt
62a9aed53a
SAMV7 MCAN: Add logic to send messages usign the TX FIFOQ
2015-08-04 11:41:38 -06:00
Anton D. Kachalov
a8fc587d87
Fixup operation mode set
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-04 20:28:43 +03:00
Gregory Nutt
f7350568f3
STM32 ADC changes suggested by Max Kriegleder
2015-08-04 06:29:40 -06:00
Gregory Nutt
4e2a95c71e
SAMV7 MCAN: Add some default values of configuration settings
2015-08-03 19:21:43 -06:00
Gregory Nutt
949cea035c
Fix a spelling error
2015-08-03 13:53:53 -06:00