cppcheck reports the following:
arch/risc-v/src/mpfs/mpfs_emmcsd.c:2375:22: error: Uninitialized variable: waitbits [uninitvar]
while (!(status & (waitbits | MPFS_EMMCSD_SRS12_EINT))
The finding is positive and this patch initializes it to
zero properly.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
1. Wi-Fi and BLE use common PHY functions.
2. Fix Wi-Fi & BLE coexist adapter error.
3. Update esp-wireless-drivers-3rdparty, provide coexist protection for connection.
1. Fix the issue that Wi-Fi can't connect to some special routers occasionally.
2. Support Wi-Fi 12/13 channel active scanning by default.
3. Update Wi-Fi driver code to fix issue of failure to send pkt.
4. Replace software random with hardware random
5. Fix Wi-Fi mode start error
E51 may configure the L1 and L2 caches. Once configured,
no reconfiguration is possible after hardware reset is
issued.
L2 is 16-way set associative with write-back policy. The
size 2 MB, from which 1 MB is utilized with the values
provided here. That's a total of 8 ways. The rest of the
L2 is left out for the bootloader usage.
mpfs_enable_cache() first checks the bootloader usage
doesn't overlap with the cache itself, thus providing a
set of functional values.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
So far the SD-card functionality has been tested with
the driver. Now, also the internal eMMC has been tested
working with this patch. This patch applies IOMUX and
clock settings that have been tested working with the
internal eMMC in the Polarfire Icicle kit.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This adds the proper flag for introducing the DDR
support. Also call the mpfs_ddr_init() at the
proper location.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.
DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:
envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256
l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k
256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git
For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:
cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
cat nuttx.bin >> nuttx_bootloader.bin
riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
*+0x20220000 nuttx_bootloader.bin flashable_image.hex
This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
- Fix the FPU enabling code
- If booting from eNVM, all harts start booting. With CONFIG_MPFS_BOOTLOADER,
one can allow just one hart booting and rest are stuck in wfi.
- Check that mtvec is actually updated before continuing the boot
- Create 5 IRQ stacks, one for each hart
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Jump to mpfs_start with mhartid in a0 as the comment says
- Don't invalidate mmu tlb on e51 (it doesn't have mmu)
- Fix FPU initialization flags on e54 (it fires IRQ5 and crashes)
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
If we repeatedly call up_cpu_pause and up_cpu_resume, there would be
cases where the next call to up_cpu_pause happens while the other CPU is
still responding to the previous resume request. In this case the
DEBUGASSERT will trigger. We should allow the first CPU to wait until the
other CPU has finished responding to the resume request.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
pid variable was initialized to -EINVAL to prevent rt_timer_deinit
from delete an invalid kthread. But priv->pid was being overwritten in the
rt_timer_init, so in case of failure to create a kthread, it would
call rt_timer_deinit with a non expected initialization value.
This adds the emmcsd driver for the Polarfire Icicle kit.
The driver has been tested with several SD-cards, such as:
- Kingston 32 GB SDS2 Canvas Select Plus
- Kingston MicroSD Canvas Select Plus
- Sandisk Extreme PRO 32 GB
- Transcend 8 GB MicroSD
The internal eMMC hasn't been tested comprehensively.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This commit moves the Wi-Fi initialization to
Wi-Fi specific file and to spiflash initialization.
It also reserves one partition for Wi-Fi use and for general use,
and makes it possible to me mounted by several FS.
Correct typos in include/nuttx/arch.h and suppress
"'noreturn' function does return" warning coming from arm_pthread_exit.c
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Add a driver for CorePWM block, which can be instantiated on PolarFire SOC FPGA
This supports 2 CorePWM blocks on the FPGA. One CorePWM block provides 8 PWM output signals
Number of configured ADC channels is currently only defined in board
level section, typically in xxx_adc.c file. This commit introduces
ioctl command ANIOC_GET_NCHANNELS that returns the number of configured
channels which is determined by the driver code. The change can allow the
applications to be more flexible when it comes to multiple ADC devices
with different number of configured channels.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
use the same condition check in declaration and reference
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7b05316e914708fceeddac394d784ee3720a3c1b
1. Added check for repeated connection wifi operations.
2. Invoke the carrier on/off operation in the wrong place.
3. The RTC initialization time is incorrect.
4. Reserve 32K I-Cache space in the linker script.
5. Increase the size of the wifi firmware receiving buffer.
Signed-off-by: Virus.V <virusv@live.com>
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
needed anymore.
Implement the up_extraheaps_init function to initialize all separate
heaps.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
instead calling kmm_heapmember or umm_heapmember because:
1.The stack supplied by caller may allocate from heap too
2.It's hard to implement these two function in ASan case
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I196377822b7c4643ab4f29b7c1dc41dcd7c4dab1
Summary:
- I noticed that stack coloring for the idle thread stacks does
not work due to the recent changes
- This commit fixes this issue
Impact:
- k210 only
Testing:
- Tested with both maix-bit (dev board) and QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The RISC-V Integer Calling Convention states that the stack pointer
shall always be aligned to a 128-bit boundary upon procedure entry, both
for RV32* and RV64* ISAs (exception to the RV32E ISA, which must follow a
specific convention)
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds coloration for the idle stacks
Impact:
- k210 only
Testing:
- Tested with smp and nsh configs with QEMU and dev board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds coloration for the idle stack
- Also, apply la pseudo-instruction instead of lui and addi
Impact:
- fe310 only
Testing:
- Tested with nsh with QEMU and dev board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that stack corruption happens due to recent refactoring
- This commit fixes this issue
Impact:
- SMP only
Testing:
- Tested with maix-bit:smp (QMU and dev board)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
All supported arch uses a push-down stack:
The stack grows toward lower addresses in memory. The stack pointer
register points to the lowest, valid working address (the "top" of
the stack). Items on the stack are referenced as positive(include zero)
word offsets from sp.
Which means that for stack in the [begin, begin + size):
1.The initial SP point to begin + size
2.push equals sub and then store
3.pop equals load and then add
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
tcpip ok
update wifi demo configuration
fix tcpip input cause misalign fault
change some api definetions in nuttx
fix wifi manager strlen copy without suffix null character
fix 602 network buf allocation issue
wifi scan works
[ble] Add controller code
[BLE] Add nuttx adapt code for blecontroller .
[BLE] modified include file path, to fix cflag is too long.
[ble]Test ble peripheral pass, save code.
[ble] Organize the code
[BLE] Add blecontroller config for nuttx
[BLE] Add config for ble example
fix tcp lost packet when rx
support wpa3.
Copy default config from wifi default config. Create ble for local test and ble tester for autopts.
Add config for local test.
Add pts teset config for host test
Add config for mesh test
Create task to init blecontroller
Delete blecontroller rx thread.
using idle task to receive hci command from host
Set ble device name to /dev/ble, and fix code.
1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan
rm _sp_main stack.
change h/l workq_stack_size 6K
change l workq_stack_size 3K.
[ble] delete file_detach
color idle stack.
clear bl602 netdev code
SCAN is sorted according to RSSI
enlarge nsh command line buffer
fixup stack overflow check checkfail when startup
arch/risc-v/BL602:fix reboot cause crash
reboot default use romapi.
riscv/bl602:netdev support defered input, remove wifi_tx function
risc-v/bl602:fix sem_timedwait usage error in bl_cmds
risc-v/bl602:fix memory access out of bounds when copy ssid
remove ble and wifi source, download when build
add bl602 blob gitignore
risc-v/bl602:remove ble-pts defconfig
Fix some typos in NuttX style naming
Fix the replacement of tab to space
fix wlan interface down still receive packet
fix wapi crash, rx when ifdown,and ble_hci_rx_do
change system reset to rom dirver
change ble hci interval to 50ms
NuttX support wifi enable/disable log via KConfig
support country code configuration in Kconfig
fix ap tx not work
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
Bug description:
CONFIG_SMP=y
Suppose we have 2 cores in SMP, here is the ps return:
PID GROUP CPU PRI POLICY TYPE NPX STATE STACK USED FILLED COMMAND
0 0 0 0 FIFO Kthread N-- Assigned 004076 000748 18.3% CPU0 IDLE
1 0 1 0 FIFO Kthread N-- Running 004096 000540 13.1% CPU1 IDLE
nsh> kill -4 0
or:
nsh> kill -4 1
system blocked.
Reason:
In func xx_sigdeliver() restore stage, when saved_irqcount == 0, that means
rtcb NOT in critical_section before switch to xx_sigdeliver(), then we need
reset the critical_section state before swith back.
Fix:
Add condition to cover saved_irqcount == 0.
Change-Id: I4af7f95e47f6d78a4094c3757d39b01ac9d533b3
Signed-off-by: ligd <liguiding1@xiaomi.com>
The GPIO example was also extended to include testing an interrupt pin.
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
This commits adds support for the ESP32-C3 IO Mux and GPIO Matrix. It
also includes necessary board logic to run the GPIO example with 2
outputs.
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This function is already declared in include/nuttx/init.h include this
file instead.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Don't declare riscv_addregion if CONFIG_MM_REGIONS is < 1, so we won't
have to provide a dummy stub for every chip.
Also rename the function from up_addregion to riscv_addregion since it's
not exported outside the arch directory.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Modify the default configuration in KConfig.
Sync latest commit from mainline.
Remove unused demo configuration
fixup bl602 nsh defconfig cause CICD failed
Rebase from mainline code
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes global IRQ control logic
- In previous implementation, g_cpu_irqset for a remote CPU was
set in sched_add_readytorun(), sched_remove_readytorun() and
up_schedule_sigaction()
- In this implementation, they are removed.
- Instead, in the pause handler, call enter_critical_setion()
which will call up_cpu_paused() then acquire g_cpu_irqlock
- So if a new task with irqcount > 1 restarts on the remote CPU,
the CPU will only hold a critical section. Thus, the issue such as
'POSSIBLE FOR TWO CPUs TO HOLD A CRITICAL SECTION' could be resolved.
- Fix nxsched_resume_scheduler() so that it does not call spin_clrbit()
if a CPU does not hold a g_cpu_irqset
- Fix nxtask_exit() so that it acquires g_cpu_irqlock
- Update TODO
Impact:
- All SMP implementations
Testing:
- Tested with smp, ostest with the following configurations
- Tested with spresense:wifi_smp (NCPUS=2,4)
- Tested with sabre-6quad:smp (QEMU, dev board)
- Tested with maix-bit:smp (QEMU)
- Tested with esp32-core:smp (QEMU)
- Tested with lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same logic added to cxd56_cpupause.c
Impact:
- SMP only
Testing:
- Tested with maix-bit:smp (QEMU)
- Run smp and ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
So that it matches what the toolchain expects.
spacetanuki% riscv64-unknown-elf-gcc --version
riscv64-unknown-elf-gcc (SiFive GCC 8.3.0-2019.08.0) 8.3.0
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
spacetanuki% riscv64-unknown-elf-gcc -dM -E - < /dev/null | grep UINT64_TYPE
#define __UINT64_TYPE__ long unsigned int
spacetanuki%
Summary:
- Apply the same fix for Arm SMP
Impact:
- Affects SMP only
Testing:
- Tested with maix-bit:smp (qemu)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
When executing an MRET instruction, MIE is set to MPIE.
In order to branch to up_sigdeliver() with interrupts disabled,
we need to change MPIE, not MIE.
When executing an MRET instruction, MIE is set to MPIE.
In order to branch to up_sigdeliver() with interrupts disabled,
we need to change MPIE, not MIE.
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
EXTRAFLAGS is already applied to *FLAGS in board's Make.defs (and
it applies to whole build, not just arch-code). EXTRAFLAGS is passed
around each make call to the complete build.
KDEFINE is already added to EXTRAFLAGS in main Makefile so no need
to add it again in arch-level Makefile
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
Summary:
- ARCH_GLOBAL_IRQDISABLE was initially introduced for LC823450 SMP
- At that time, i.MX6 (quad Cortex-A9) did not use this config
- However, this option is now used for all CPUs which support SMP
- So it's good timing for refactoring the code
Impact:
- Should have no impact because the logic is the same for SMP
Testing:
- Tested with board: spresense:smp, spresense:wifi_smp
- Tested with qemu: esp32-core:smp, maix-bit:smp, sabre-6quad:smp
- Build only: lc823450-xgevk:rndis, sam4cmp-db:nsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
PR #1450 broke the Cygwin build. Refer to Issue #1672.
The use of of logic like:
EXTRA_LIBPATHS += -L "${dir ${shell $(CC) $(ARCHCPUFLAGS) --print-file-name=libgcc.a}}"
fails when the Toolchain $(CC) is a native Windows toolchain. That is because the returned path is a Windows-style patch which cannot be handled by the make 'dir' command. Commit 4910d43ab0 reorganized a lot of definitions and replaced the correct code with the use of the limit make 'dir' command. The original code used the Bash dirname command which does not suffer from this limitation; it can handle both POSIX and Windows paths.
This was verified using the stm32f4discover:nsh toolchain with the Windows native ARM Embedded toolchain. That toolchain returns:
arm-none-eabi-gcc --print-file-name=libgcc.a
c:/program files (x86)/gnu tools arm embedded/9 2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/libgcc.a
because nx_task_idle doesn't call sched_note_start. To avoid the
same error happen again in the furture, nx_task_idle is removed.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Make.dep file should be updated by .config changed after first make.
There are 2 cases affected for this problem:
1) Add source files by config symbol
2) Include header files in #ifdef directive
These 2 cases may not be included in Make.dep and this may prevent the
differential build from working correctly.
1.It make sense to let Toolchain.defs give the default value
2.The board can still change if the default isn't suitable
3.Avoid the same definition spread more than 200 Make.defs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64
since exit will be only callable from userspace and change
the 1st argument from "const uint8_t *" to "const char *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I86487d57210ab63109148232da71dbc4d60a563b
ASAN trace:
...
==32087==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xf4502120 at pc 0x56673ca3 bp 0xff9b6a08 sp 0xff9b69f8
WRITE of size 1 at 0xf4502120 thread T0
#0 0x56673ca2 in strcpy string/lib_strcpy.c:64
0xf4502120 is located 0 bytes to the right of 8224-byte region [0xf4500100,0xf4502120)
allocated by thread T0 here:
#0 0xf7a60f54 in malloc (/usr/lib32/libasan.so.4+0xe5f54)
#1 0x5667725d in up_create_stack sim/up_createstack.c:135
#2 0x56657ed8 in nxthread_create task/task_create.c:125
#3 0x566580bb in kthread_create task/task_create.c:297
#4 0x5665935f in work_start_highpri wqueue/kwork_hpthread.c:149
#5 0x56656f31 in nx_workqueues init/nx_bringup.c:181
#6 0x56656fc6 in nx_bringup init/nx_bringup.c:436
#7 0x56656e95 in nx_start init/nx_start.c:809
#8 0x566548d4 in main sim/up_head.c:95
#9 0xf763ae80 in __libc_start_main (/lib/i386-linux-gnu/libc.so.6+0x18e80)
CALLSTACK:
#8 0xf79de7a5 in __asan_report_store1 () from /usr/lib32/libasan.so.4
#9 0x565fd4d7 in strcpy (dest=0xf4a02121 "", src=0xf5c00895 "k") at string/lib_strcpy.c:64
#10 0x565e4eb2 in nxtask_setup_stackargs (tcb=0xf5c00810, argv=0x0) at task/task_setup.c:570
#11 0x565e50ff in nxtask_setup_arguments (tcb=0xf5c00810, name=0x5679e580 "hpwork", argv=0x0) at task/task_setup.c:714
#12 0x565e414e in nxthread_create (name=0x5679e580 "hpwork", ttype=2 '\002', priority=224, stack=0x0, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:143
#13 0x565e42e3 in kthread_create (name=0x5679e580 "hpwork", priority=224, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:297
#14 0x565e5557 in work_start_highpri () at wqueue/kwork_hpthread.c:149
#15 0x565e3e32 in nx_workqueues () at init/nx_bringup.c:181
#16 0x565e3ec7 in nx_bringup () at init/nx_bringup.c:436
#17 0x565e3d96 in nx_start () at init/nx_start.c:809
#18 0x565e3195 in main (argc=1, argv=0xffe6b954, envp=0xffe6b95c) at sim/up_head.c:95
Change-Id: I096f7952aae67d055daa737e967242eb217ef8ac
Signed-off-by: chao.an <anchao@xiaomi.com>
like other related macro(e.g. INTMAX_MIN, INTMAX_MAX...)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8863599960b1a9b1c22ae9c35735a379a4c745b0
utilize the call inside nxtask_exit instead, also move
nxsched_suspend_scheduler to nxtask_exit for symmetry
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I219fc15faf0026e452b0db3906aa40b40ac677f3
-Move task_init() and task_activate() prototypes from include/sched.h to include/nuttx/sched.h. These are internal OS functions and should not be exposed to the user.
-Remove references to task_init() and task_activate() from the User Manual.
-Rename task_init() to nxtask_init() since since it is an OS internal function
-Rename task_activate() to nxtask_activate since it is an OS internal function
remove the TLS alignment check
Regression by:
--------------------------------------------------------
commit a6da3c2cb6
Author: Ouss4 <abdelatif.guettouche@gmail.com>
Date: Thu May 7 18:50:07 2020 +0100
arch/*/*_checkstack.c: Get aligned address only when
CONFIG_TLS_ALIGNED is enabled.
--------------------------------------------------------
commit c2244a2382
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu May 7 09:46:47 2020 -0600
Remove CONFIG_TLS
A first step in implementing the user-space error is
force TLS to be enabled at all times. It is no longer optional
Signed-off-by: chao.an <anchao@xiaomi.com>
- Remove per-thread errno from the TCB structure (pterrno)
- Remove get_errno() and set_errno() as functions. The macros are still available as stubs and will be needed in the future if we need to access the errno from a different address environment (KERNEL mode).
- Add errno value to the tls_info_s structure definitions
- Move sched/errno to libs/libc/errno. Replace old TCB access to the errno with TLS access to the errno.
Mac OS X was renamed to macOS at some point. Update references to
OSX, OS X, Mac OS X, Mac OSX, and other permutations, to macOS,
in README files and in comments of other files.
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.
Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
There are cases that USE_SERIALDRIVER is defined but USE_EARLYSERIALINIT not defined in some configs. So use ifdef USE_EARLYSERIALINIT to include up_earlyserialinit anyway.
An error was introduced from:
commit f982ee43db
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Tue Feb 18 09:55:04 2020 +0800
drivers/serial: Remove the lowconsole driver
Replace with the syslog console driver which has more capability than lowconsole
And remove syslog_init_e because all initialization is later now and we don't
distinguish the initialition phase anymore after ramlog don't need special
initialize.
Because we can get the same function by CONSOLE_SYSLOG/syslog_console_init.
BTW, it isn't a good choice to use g_ramlogfops as /dev/console since nsh
will read back what it send out which will surprise most people.
it doesn't make sense that iob initialization is in up_initialize
but other memory components initialization is called in nx_start
Change-Id: Id43aeaa995f340c5943f59a0067a483ff3ac34a2
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG. The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
