Commit Graph

858 Commits

Author SHA1 Message Date
Xiang Xiao
517974787f Rename clock_systime[r|spec] to clock_systime_[ticks|timespec]
follow up the new naming convention:
https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions
2020-05-10 14:35:50 -06:00
Gregory Nutt
f92dba212d sched/sched/sched.h: Make naming of all internal names consistent:
1. Add internal scheduler functions should begin with nxsched_, not sched_
2. Follow the consistent naming patter of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions
2020-05-09 16:58:42 -03:00
Gregory Nutt
4b44b628ea Run nxstyle against all .c and .h files modified by this PR.
All complaints fixed except for those that were not possible to fix:

- Used of Mixed case identifier in ESP32 files.  These are references to Expressif ROM functions which are outside of the scope of NuttX.
2020-05-09 14:19:08 -03:00
Gregory Nutt
a4218e2144 include/nuttx/sched.h: Make naming of all internal names consistent:
1. Add internal scheduler functions should begin with nxsched_, not sched_
2. Follow the consistent naming patter of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions
2020-05-09 14:19:08 -03:00
Xiang Xiao
b7d922960f Fix nxstyle issue
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-08 07:20:49 -06:00
Ouss4
958999c443 arch/mips/src/common/mips_usestack.c: Include tls.h header. 2020-05-07 18:41:43 -06:00
Gregory Nutt
3dca5eba15 Completes the Implementation of the TLS-based errno
- Remove per-thread errno from the TCB structure (pterrno)
- Remove get_errno() and set_errno() as functions.  The macros are still available as stubs and will be needed in the future if we need to access the errno from a different address environment (KERNEL mode).
- Add errno value to the tls_info_s structure definitions
- Move sched/errno to libs/libc/errno.  Replace old TCB access to the errno with TLS access to the errno.
2020-05-07 23:11:34 +01:00
Gregory Nutt
c2244a2382 Remove CONFIG_TLS
A first step in implementing the user-space error is force TLS to be enabled at all times.  It is no longer optional
2020-05-07 12:04:16 -06:00
Ouss4
a4dd967440 arch/: Implement up_tls_info() for the rest of the architectures. 2020-05-06 21:56:40 -06:00
Ouss4
1e3ec6ecd0 arch/: Implement Thread Local Storage for the rest of the architectures.
The change consisted on modifying *_usestack.c and *_createstack.c
2020-05-06 21:56:40 -06:00
Xiang Xiao
94bb2e05bb syslog: Code outside libc shouldn't call nx_vsyslog directly
since nx_vsyslog is the implementation detail

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 20:53:11 -06:00
Xiang Xiao
eca7059785 Refine __KERNEL__ and CONFIG_BUILD_xxx usage in the code base
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-01 10:43:47 -03:00
Ouss4
e5443a4718 Remove a duplicate file introduced by the previous PR. 2020-04-26 22:12:42 -06:00
Ouss4
32597a763a arch/mips: Fix file naming. 2020-04-26 20:56:30 -06:00
Nathan Hartman
d6f7821b15 Docs and comments: Change OSX -> macOS
Mac OS X was renamed to macOS at some point. Update references to
OSX, OS X, Mac OS X, Mac OSX, and other permutations, to macOS,
in README files and in comments of other files.
2020-04-26 07:48:33 -06:00
Xiang Xiao
d3c4879113 Fix nxstyle warning
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-13 12:01:39 -06:00
Xiang Xiao
b22e3b9e28 nuttx: Fix the nightly build warning
lpc2148_spi1.c:142:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type 'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
  142 |   .send              = spi_send,
      |                        ^~~~~~~~
lpc2148_spi1.c:142:24: note: (near initialization for 'g_spiops.send')

In file included from ieee802154/mac802154_bind.c:49:
ieee802154/mac802154_internal.h: In function 'mac802154_setdevmode':
ieee802154/mac802154_internal.h:788:42: warning: converting a packed 'enum ieee802154_devmode_e' pointer (alignment 1) to a 'const union ieee802154_attr_u' pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  788 |                         (FAR const union ieee802154_attr_u *)&mode);
      |                                          ^~~~~~~~~~~~~~~~~

chip/stm32_hciuart.c: In function 'hciuart_read':
chip/stm32_hciuart.c:2104:30: warning: statement with no effect [-Wunused-value]
 2104 |                       ntotal == (ssize_t)ret;
      |                       ~~~~~~~^~~~~~~~~~~~~~~

wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_auth_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:579:23: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  579 |   type = bcmf_getle32(&event->type);
      |                       ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:580:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  580 |   status = bcmf_getle32(&event->status);
      |                         ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_scan_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:619:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  619 |   status = bcmf_getle32(&event->status);
      |                         ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:620:35: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  620 |   escan_result_len = bcmf_getle32(&event->len);
      |                                   ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_bdc.c: In function 'bcmf_bdc_process_event_frame':
wireless/ieee80211/bcm43xxx/bcmf_bdc.c:166:27: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  166 |   event_id = bcmf_getle32(&event_msg->event.type);
      |                           ^~~~~~~~~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_direct':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:157:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  157 |   ret = SDIO_RECVR5(dev, SD_ACMD52, (uint32_t *)&resp);
      |   ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_extended':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:239:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  239 |           ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |           ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:244:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  244 |           ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |           ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:257:7: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  257 |       ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |       ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:265:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  265 |   SDIO_RECVR1(dev, SD_ACMD52ABRT, (uint32_t *)&resp);
      |   ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~

chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:2860:7: warning: unused variable 'ret' [-Wunused-variable]
 2860 |   int ret;
      |       ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:3044:7: warning: unused variable 'ret' [-Wunused-variable]
 3044 |   int ret;
      |       ^~~

chip/stm32_i2c.c:722:12: warning: 'stm32_i2c_sem_wait_noncancelable' defined but not used [-Wunused-function]
  722 | static int stm32_i2c_sem_wait_noncancelable(FAR struct i2c_master_s *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wireless/gs2200m.c: In function 'gs2200m_read':
wireless/gs2200m.c:727:20: warning: passing argument 1 of 'nxsem_wait' from incompatible pointer type [-Wincompatible-pointer-types]
  727 |   ret = nxsem_wait(dev);
      |                    ^~~
      |                    |
      |                    struct gs2200m_dev_s *

.config:1207:warning: symbol value '' invalid for TESTING_OSTEST_FPUSIZE

platform/audio/cxd56_audio_analog.c:69:13: warning: inline function 'cxd56_audio_clock_is_enabled' declared but never defined
   69 | inline bool cxd56_audio_clock_is_enabled(void);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:68:13: warning: inline function 'cxd56_audio_clock_disable' declared but never defined
   68 | inline void cxd56_audio_clock_disable(void);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:67:13: warning: inline function 'cxd56_audio_clock_enable' declared but never defined
   67 | inline void cxd56_audio_clock_enable(uint32_t clk, uint32_t div);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~

chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:1348:7: warning: unused variable 'ret' [-Wunused-variable]
 1348 |   int ret;
      |       ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:1496:7: warning: unused variable 'ret' [-Wunused-variable]
 1496 |   int ret;
      |       ^~~

chip/stm32_i2c.c:729:12: warning: 'stm32_i2c_sem_wait_uninterruptble' defined but not used [-Wunused-function]
  729 | static int stm32_i2c_sem_wait_uninterruptble(FAR struct i2c_master_s *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wireless/lpwan/sx127x/sx127x.c:147:52: warning: missing terminating ' character
  147 | #  warning OOK support is not complete, RX+TX doesn't work yet!
      |                                                    ^

str71_spi.c:435:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type
                                               'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
  435 |   .send              = spi_send,
      |                        ^~~~~~~~
str71_spi.c:435:24: note: (near initialization for 'g_spiops.send')

chip/pic32mx-lowconsole.c:147:24: warning: 'pic32mx_getreg' defined but not used [-Wunused-function]
 static inline uint32_t pic32mx_getreg(uintptr_t uart_base,
                        ^
chip/pic32mx-gpio.c:113:20: warning: 'pic32mx_value' defined but not used [-Wunused-function]
 static inline bool pic32mx_value(uint16_t pinset)
                    ^
chip/pic32mz-gpio.c:124:20: warning: 'pic32mz_value' defined but not used [-Wunused-function]
 static inline bool pic32mz_value(pinset_t pinset)
                    ^
chip/pic32mx-usbdev.c:3065:1: warning: 'pic32mx_epreserved' defined but not used [-Wunused-function]
 pic32mx_epreserved(struct pic32mx_usbdev_s *priv, int epno)
 ^

mmcsd/mmcsd_spi.c: In function 'mmcsd_mediachanged':
mmcsd/mmcsd_spi.c:1938:7: warning: 'return' with a value, in function returning void
       return ret;
       ^

In file included from partition/fs_partition.c:42:0:
partition/partition.h:66:19: warning: 'read_partition_block' defined but not used [-Wunused-function]
 static inline int read_partition_block(FAR struct partition_state_s *state,
                   ^

local/local_netpoll.c: In function 'local_pollsetup':
local/local_netpoll.c:305:1: warning: label 'pollerr' defined but not used [-Wunused-label]
 pollerr:
 ^~~~~~~

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: If3ea8f32b878aa218072130f7c3018f0d3c1aca5
2020-04-13 12:01:39 -06:00
liuhaitao
459ad99373 Use EXTRAFLAGS instead of EXTRADEFINES to be used by make via command line
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.

Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-11 08:31:08 -06:00
ligd
231ad202ee global change: repace sched_xfree() to kxmm_free()
Changes:
sched_xfree() => kxmm_free()
remove garbage related APIs
remove ARCH_HAVE_GARBAGE

Cause garbage feature move to mm_heap, then don't need
garbage anymore.

Change-Id: If310790a3208155ca8ab319e8d038cb6ff92c518
Signed-off-by: ligd <liguiding@fishsemi.com>
2020-04-09 10:29:28 -06:00
hartmannathan
bfc153ca27
Fix typos in comments and documentation (#750)
* Fix typos in comments and documentation
2020-04-08 06:45:35 -06:00
Nakamura, Yuuichi
9029e4daee Fix nxstyle issues 2020-04-07 06:23:15 -06:00
Nakamura, Yuuichi
e264484c16 Remove type casting to wdentry_t (arch/) 2020-04-07 06:23:15 -06:00
Nathan Hartman
679b4fbee2 arch: Fix included directed -> included directly
This typo had been copied and pasted into numerous irq and syscall
headers.
2020-04-05 22:31:15 +01:00
Ouss4
428131efd0 arch/mips/src/pic32mz/pic32mz-ethernet.c: Fix style issues. 2020-04-03 10:42:43 -06:00
Ouss4
4d771c2bcf Check return from nxsem_wait_uninterruptible()
This commit is for all DMA drivers under arch/.
2020-04-02 09:06:09 -06:00
Gregory Nutt
fc467021cf Check return from nxsem_wait_initialize()
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution:  Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly.  This commit is for all I2C drivers under arch/.
2020-04-02 00:46:06 +01:00
YAMAMOTO Takashi
1ffa009c8b Revert "Don't generate .depend anymore"
This reverts commit 79af7fbf4e.

Because:

* btashton reported some issues in local builds:

  https://github.com/apache/incubator-nuttx/pull/603#issuecomment-602264860

* this might be related to the current CI breakage:

  > /bin/sh: 1: /__w/incubator-nuttx/incubator-nuttx/nuttx/tools/mkdeps: not found
2020-03-22 23:07:29 -05:00
Xiang Xiao
79af7fbf4e
Don't generate .depend anymore 2020-03-22 18:15:29 +00:00
Nathan Hartman
a5e643b0cd Fix typos in comments and documentation. 2020-03-16 20:01:11 -06:00
Petro Karashchenko
3fa6baec98 spi: change spi_send() interface to support of 32-bit word transfer
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2020-03-09 08:03:35 -06:00
Juha Niskanen
f3490e42c3 Fix typos in comments 2020-03-03 09:11:57 -06:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
liuhaitao
b4cf5f5dab arch: refine up_serialinit/up_earlyserialinit/rpmsg_serialinit 2020-02-23 09:11:57 -06:00
liuhaitao
c5eab0dc8f arch: use ifdef USE_EARLYSERIALINIT to include up_earlyserialinit
There are cases that USE_SERIALDRIVER is defined but USE_EARLYSERIALINIT not defined in some configs. So use ifdef USE_EARLYSERIALINIT to include up_earlyserialinit anyway.
2020-02-23 09:11:43 -06:00
liuhaitao
8ca4ca5ae8 arch: undef USE_SERIALDRIVER if CONFIG_CONSOLE_SYSLOG
An error was introduced from:

  commit f982ee43db
  Author: Xiang Xiao <xiaoxiang@xiaomi.com>
  Date:   Tue Feb 18 09:55:04 2020 +0800

    drivers/serial: Remove the lowconsole driver

    Replace with the syslog console driver which has more capability than lowconsole
2020-02-23 09:10:06 -06:00
Xiang Xiao
bd4e8e19d3 Run codespell -w against all files
and fix the wrong correction
2020-02-22 14:45:07 -06:00
Ouss4
ac4049682f arch/mips: Fix the SW0 priority set by commit eb1adca
It must be strictly greater than IPL to get serviced.
2020-02-21 17:00:04 -06:00
Ouss4
eb1adcafe3 arch/mips/src/pic32mX/pic32mX-irq.c: Use the defined CS0 irq number. 2020-02-20 19:30:48 -06:00
Xiang Xiao
51a2171c71 ramlog: Remove g_ramlog_syslog_channel since it's same as g_default_channel
And remove syslog_init_e because all initialization is later now and we don't
distinguish the initialition phase anymore after ramlog don't need special
initialize.
2020-02-18 13:04:45 -06:00
Xiang Xiao
dcaaf2d912 ramlog: Remove all ramlog_consoleinit related code
Because we can get the same function by CONSOLE_SYSLOG/syslog_console_init.
BTW, it isn't a good choice to use g_ramlogfops as /dev/console since nsh
will read back what it send out which will surprise most people.
2020-02-18 12:57:43 -06:00
Xiang Xiao
f982ee43db drivers/serial: Remove the lowconsole driver
Replace with the syslog console driver which has more capability than lowconsole
2020-02-18 12:51:09 -06:00
Xiang Xiao
6b77f73583 arch: Move iob_initialize into nx_start just after heap initialization
it doesn't make sense that iob initialization is in up_initialize
but other memory components initialization is called in nx_start

Change-Id: Id43aeaa995f340c5943f59a0067a483ff3ac34a2
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-18 10:26:19 -03:00
Xiang Xiao
e7d9260014 arch: Customize the typedef of size_t instead of intptr_t
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG.  The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
2020-02-18 07:15:19 -06:00
Juha Niskanen
15b78abccf Fix typos in comments 2020-02-14 08:50:45 -06:00
Ouss4
ac4e6618bb arch/mips: Clear the software interrupt through a common function
implemented in the chip specific code.
2020-02-10 12:40:41 -06:00
Ouss4
90043390ff arch/mips/: Fix architectures' references in Kconfigs and Toolchain.defs. 2020-02-10 12:40:41 -06:00
Ouss4
0dc1dc605d arch/mips: When a CPU implements an External Interrupt Controller,
use the IPL bits to control masking interrupts.
2020-02-10 12:40:41 -06:00
Xiang Xiao
6d69439f58 Call xxx_timer_initialize from clock subsystem
Call xxx_timer_initialize from clock subsystem to make timer ready for use as soon as possiblei and revert the workaround:

commit 0863e771a9
Author: Gregory Nutt <gnutt@nuttx.org>
Date:   Fri Apr 26 07:24:57 2019 -0600

    Revert "sched/clock/clock_initialize.c:  clock_inittime() needs to be done with CONFIG_SCHED_TICKLESS and clock_initialize should skip clock_inittime() for external RTC case since the RTC isn't ready yet."

    This reverts commit 2bc709d4b9.

    Commit 2bc709d4b9 was intended to handle the case where up_timer_gettime may not start from zero case.  However, this change has the side-effect of breaking every implementation of tickless mode:  After this change the tickless timer structures are used before they are initialized in clock_inittime().  Initialization happens later when up_initialize is called() when arm_timer_initialize().

    Since the tickless mode timer is very special, one solution might be to

    1. Rename xxx_timer_initialize to up_timer_initialize
    2  Move up_timer_initialize to include/nuttx/arch.h
    3.  Call it from clock subsystem instead up_initialize

    Basically, this change make timer initialization almost same as rtc initialization(up_rtc_initialize).

    For now, however, we just need to revert the change.
2020-02-08 07:40:06 -06:00
Xiang Xiao
76bbed07a4 Call up_irqinitialize from irq subsystem
Call up_irqinitialize from irq subsystem to make the irq ready for use as soon as possible
2020-02-08 07:39:22 -06:00
Xiang Xiao
c5b1554d84 Remove NETDEV_LOOPBACK option, NET_LOOPBACK is enough 2020-02-02 08:25:06 -06:00
Xiang Xiao
5c80b94820 Replace #include <semaphore.h> to #include <nuttx/semaphore.h>
Since the kernel side should call nxsem_xxx instead and remove the unused inclusion
2020-02-01 08:27:30 -06:00
Xiang Xiao
80277d1630
Refine the preprocessor conditional guard style (#190) 2020-01-31 19:07:39 +01:00
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189)
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Gregory Nutt
960c26491c Run tools/nxstyle against all files modified by PR187 and correct complaints 2020-01-30 19:06:13 -06:00
Ouss4
73bdb433bb arch/mips/pic32mz/pic32mz-lowconsole.c: Wait for transfer complete.
Wait for the transfer to complete when using up_lowputc.
2020-01-30 19:03:54 -06:00
Ouss4
701b6897d7 arch/mips/src/pic32mz/pic32mz-head.S: Add showprogress macro 2020-01-30 19:03:01 -06:00
Ouss4
300fe5e354 arch/mips/src/Common and mips32: Access g_current_regs through the macro CURRENT_REGS. 2020-01-30 19:01:47 -06:00
Ouss4
84153ad1a5 arch/mips/src/pic32mz/pic32mz-timer.c: Eliminate a warning found during
testing.
2020-01-13 16:39:54 -06:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Xiang Xiao
87cf5c58ae Correct some problems with network timed events when there are multiple network devices in the configuration.
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>

    Ran nxstyle against many of the affected files.  But this job was too big for today.  Many of the network drivers under arch are highly non-compiant and generate many, many faults from nxstyle.  Those will have to be visited again another day.

Author: Xiang Xiao <xiaoxiang@xiaomi.com>

    This effects all network drivers as well as timing related portions of net/: devif_poll_tcp_timer shouldn't be skipped in the multiple card case.  devif_timer will be called multiple time in one period if the multiple card exist, the elapsed time calculated for the first callback is right, but the flowing callback in the same period is wrong(very short) because the global variable g_polltimer is used in the calculation.  So let's pass the delay time to devif_timer and remove g_polltimer.
2019-12-24 10:37:30 -06:00
Nathan Hartman
9655730ef8 Fix various typos and spelling errors. 2019-12-12 07:41:51 -06:00
Ouss4
47129b36bd arch/mips/*: Run nxstyle on the arch/mips directory. 2019-12-08 08:09:11 -06:00
Gregory Nutt
69318b1024 Re-implements reverted commit 344f7bc9f6 in a way that should not have the undesired side-effect. include/nuttx/sched.h: Add a bit to the TCB flags to indicat the thread is a user thread in a syscall. sched/nuttx/nxsig_dispatch.c: Delay dispatching to signal handlers if within a system call. In all syscall implementations: Process delayed signal handling when exiting system call. 2019-11-28 12:47:36 -06:00
Gregory Nutt
cbdd590c82 Revert "include/nuttx/sched.h: Add storage for a previous signal mask. arch/: In all syscall implementations, block all signals before dispatching a system call; resotre signal mask when the system call returns."
Using the sigprocmask() for this purpose has too many side-effects.

This reverts commit 344f7bc9f6.
2019-11-28 11:57:54 -06:00
Gregory Nutt
344f7bc9f6 include/nuttx/sched.h: Add storage for a previous signal mask. arch/: In all syscall implemenations, block all signals before dispatching a system call; resotre signal mask when the system call returnes. 2019-11-28 10:51:29 -06:00
Ouss4
4e3e9fabc7 arch/mips/src/pic32mz/pic32mz-ethernet.c: Clean/invalidate descriptors and buffers when needed to account for an enabled cache. 2019-11-23 09:28:14 -06:00
Ouss4
bd45193a79 arch/mips: Add cache operations. Cache is initialized at startup (head.S) and the different operations are implemented in up_cache.S. 2019-11-23 09:16:41 -06:00
Ouss4
0970d742e9 arch/mips/src/pic32mz/pic32mz-lowinit.c: Remove the pic32mz_k0cache function, this was actually enabling cache in KSEG2. Correct (as per the datasheet) the values for initializing the prefetch module. Add a function to disable all ADC inputs at startup. When ADC is used each pin will be enabled individually. 2019-11-23 09:05:13 -06:00
Ouss4
fd1b82ae4b arch/mips/src/pic32mz/pic32mz-gpio.h: Include stdbool and stdint, they are used in this file. 2019-11-23 08:59:02 -06:00
Ouss4
5a3c9c914c arch/mips/src/pic32mz/pic32mz-i2c.c: When perfoming an i2c reset, the pins were used uninitialized. 2019-11-23 08:57:43 -06:00
Ouss4
cbc72f756c arch/mips/src/pic32mz/pic32mz-spi.c: Transfers can now be configured to use DMA. 2019-11-23 08:48:29 -06:00
Ouss4
fcc1410485 arch/mips/src/pic32mz/pic32mz-dma.c: Add a way to reconfigure a DMA channel. 2019-11-23 08:35:48 -06:00
Ouss4
b853a5c750 arch/mips/src/pic32mz/pic32mz-dma.c: Make the DMA interrupt event configurable when setting up a transfer. This allows changing the event without deallocating a channel first. Clear the DMA interrupt flag when the ISR is called. Change some misleading names. 2019-11-23 08:33:06 -06:00
Xiang Xiao
800e12fc42 arch/: Add rpmsg_serialini() call to every implementation of up_initialize() for rpmsg uart initialization. 2019-11-04 08:11:50 -06:00
Nathan Hartman
46aaec7ba0 Fix minor typos in docs and comments. 2019-09-29 12:52:20 -06:00
Juha Niskanen
e8b5dd4528 Fix use of undefined pp-token #errror, other typos. 2019-09-19 18:19:18 -06:00
Juha Niskanen
ebc6f51641 Fix some typos 2019-09-17 10:46:23 -06:00
Nathan Hartman
366053e464 Fix typos, 1 in a #define, others in comments. This changes one definition: _MQ_TIMEDRECIEVE is changed to _MQ_TIMEDRECEIVE. It appears this symbol is not used anywhere. 2019-09-11 08:56:56 -06:00
Gregory Nutt
240926c995 Beginning to update comments to reflect new organization of the boards/ sub-directory. 2019-08-08 08:46:54 -06:00
Gregory Nutt
615c0ea7ee Change naming configs/ to boards in comments, Documentation, etc. Still a few more to go. 2019-08-05 07:13:48 -06:00
Nathan Hartman
68d43d3679 Fix typos. 2019-08-04 14:50:28 -06:00
Ouss4
2d6e4bd26b arch/mips/src/pic32mz/pic32mz-config.h: Make the PLL input clock configurable. 2019-07-21 16:11:04 -06:00
Ouss4
99111c2af8 drivers/mtd/sst26.c: Accept the 16MBit Flash when reading the JEDEC-ID at init. 2019-07-21 16:07:44 -06:00
Ouss4
145970a266 arch/mips/src/pic32mz/pic32mz-spi.c: Fix SPI Mode selection. CKE is the inversion of the CPHA. 2019-07-21 15:57:06 -06:00
Abdelatif Guettouche
ee32b449a6 arch/mips/src/pic32mz: Add DMA support. 2019-06-28 10:03:18 -06:00
Ouss4
87499ba3ec arch/mips/src/pic32mz/pic32mz-gpio.c: Use LAT instead of PORT when writing. 2019-06-28 09:51:19 -06:00
Gregory Nutt
b21c12bd18 Fix errors found in build testing:
arch/mips/src:  Previous commit used CP0 register definitions that were not defined in the cp0.h header file.  Probably these were from the Microchip hacked up GCC toolchain but are not generally available.  Fix:  Add definitions to NuttX cp0.h header file.

mm/iob:  Eliminate some warnings about testing the value of an undefined pre-processor variable.
2019-05-25 11:45:22 -06:00
Gregory Nutt
d5bbbba8ad Rename all remaining arch/xxx/src/xxx/chip to arch/xxx/src/xxx/hardware. 2019-05-25 09:27:28 -06:00
Gregory Nutt
7ef69fea47 arch/mips/src/mips32/up_vfork.c: Fix a copy-paste error. On vfork, the GP register was being set to the new SP value vs. the context GP value. NOTED in Bitbucket issue 155. 2019-05-22 08:51:51 -06:00
Gregory Nutt
abf6965c24 Squashed commit of the following:
libs/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    syscall/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    wireless/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    Documentation/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    include/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    drivers/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    sched/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    configs:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/xtensa:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/z80:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/x86:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/renesas and arch/risc-v:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/or1k:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/misoc:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/mips:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/avr:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/arm:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
2019-04-29 14:52:05 -06:00
Abdelatif Guettouche
e5f84dca39 The commit corrects the gpioirq when mismatch mode is selected and adds support for edge detect mode. Slew Rate was also added for completeness. 2019-04-03 17:26:22 -06:00
Gregory Nutt
b290160b3b Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly). 2019-03-20 19:27:40 -06:00
Gregory Nutt
a64869aa67 CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense.
Squashed commit of the following:

    configs/:  The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
    fs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    tools/:  Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
    syscall/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    libs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    include/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    drivers/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    Documentation/:  Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
    binfmt/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    arch/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    net/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/Kconfig:  CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
    configs/:  Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 12:09:26 -06:00
Abdelatif Guettouche
0344e017f9 Fix a couple of problems introduced in review of commit 06e27e5547. 2019-02-06 17:23:51 -06:00
Gregory Nutt
a2e62f557d Squashed commit of the following:
sched/init/nx_bringup.c:  Fix a naming collision.
    sched/init:  Rename os_start() to nx_start()
    sched/init:  Rename os_smp* to nx_smp*
    sched/init:  Rename os_bringup to nx_bringup
    sched/init:  rename all internal static functions to begin with nx_ vs os_
2019-02-04 16:20:35 -06:00
Gregory Nutt
bb623d1e04 This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
Squashed commit of the following:

    Trivial, cosmetic
    sched/, arch/, and include:  Rename task_vforkstart() as nxtask_vforkstart()
    sched/, arch/, and include:  Rename task_vforkabort() as nxtask_vforkabort()
    sched/, arch/, and include:  Rename task_vforksetup() as nxtask_vfork_setup()
    sched/:  Rename notify_cancellation() as nxnotify_cancellation()
    sched/:  Rename task_recover() to nxtask_recover()
    sched/task, sched/pthread/, Documentation/:  Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
    sched/task:  Rename task_schedsetup() to nxtask_schedsetup()
    sched/ (plus some binfmt/, include/, and arch/):  Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
    arch/ and sched/:  Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
    sched/task:  Rename all internal, static, functions to begin with the nx prefix.
2019-02-04 13:42:51 -06:00
Gregory Nutt
b1001b4e50 Update TODO list regarding non-queuing of signal actions; Add comments in code at areas where the issue applies. 2019-02-04 08:35:03 -06:00
Gregory Nutt
a77c073797 arch/: Fix an interlock that was broken by commit 641a98a434 in all implementations of up_sigdeliver. 2019-02-03 17:14:32 -06:00
Gregory Nutt
641a98a434 arch/: The saved return register state is available on the user stack. Thic commit reorders some logic so that certain, critical registers are preserved in the TCB. This does not make the logic 100% secure, but does prevent some obvious things. sched/signal/sig_delivery: Add a flag to the TCB to indicate that we are in a signal handler. Use this flag to assure that a there a never attempts to nest signal handling operations on a thread. This was guaranteed before but when locking of pre-emption during signal delivering was eliminated in a previous commit, there was a remote possibility of an attempt to do nested signal handling. This flag assures that there is only one signal handled at a time. 2019-02-03 15:29:47 -06:00
Abdelatif Guettouche
06e27e5547 arch/mips/src/pic32mz: Add support for the PIC32MZ timers (driver, lowerhalf, freerun and oneshot) 2019-02-02 17:42:33 -06:00
Xiang Xiao
763ba51b78 arch/xxx/src/xxx/up_assert.c: Dump CPU0 IDLE stack only when PID equals 0. IDLE threads of other CPUs do not need this special check 2019-01-26 10:59:23 -06:00
ligd
5a6108c172 arch/xxx/src/common/up_initialize.c: Move up_pminitialize() after timer_initialize() 2019-01-26 07:32:14 -06:00
Gregory Nutt
df64811269 up_initialize(): As noted by Roland Takacs in Bitbucket issue 141, there is a compilation error for STM32 if CONFIG_NET and CONFIG_NETDEV_LATEINIT are selected. That was due in part to commit 19e16cb which extended up_netinitialize() with a !defined(CONFIG_NETDEV_LATEINIT) guard but did not add the guard to concrete implementations. I say "in part" because I don't think that the original intent of commit 19e16cb was to enable an alternative initialization of MCU internal Ethernet support but rather to enable support of external Ethernet devices that may have dependencies on, for example, SPI. However, this is still a proper fix to avoid the compilation error that can occur with this combination of configuration options. 2019-01-25 07:21:03 -06:00
Gregory Nutt
db24306435 arch/assertion logic: Fix additional places where the test for an IDLE task is incorrect. It is not invalid in all configurations to check for PID==0. However, the logic fixed in these places lackes sufficient intelligence to find the right stack for the CPU IDLE thread and could still show the wrong stack. 2018-12-18 17:45:46 -06:00
Gregory Nutt
ec9265aa95 arch assertions: Correct duplicated logic from commit dbf01d12b7. Checking for PID == zero is not a valid way to test for the IDLE task in all configurations! This is only true in the single CPU configuration. In multiple CPU configurations, there will be a separate IDLE task for each CPU with a different PID. 2018-12-18 17:35:42 -06:00
Ouss4
7aefd5a45f include/nuttx/i2c/i2c_master.h: Fix a small typo.
arch/mips/include/pic32mz/chip.h: Add a messing " in an error message.
arch/mips/src/pic32mz:  Add support for the I2C bus.
2018-12-07 18:53:57 -06:00
Gregory Nutt
26712ef060 arch/mips/src/mips32/Kconfig: Allow Penguino for windows for the Windows Ubuntu platform as well. 2018-11-30 06:57:05 -06:00
Gregory Nutt
0af39e1493 arch/: Update all _exit() implementations for all architectures so that they correctly called the scheduler instumentation layer for the new task that runs when the old one exits. This missing instrumentation was confusing the Critical Section Monitor logic with uses this instrumentation to track the state of critical sections. 2018-11-24 18:20:57 -06:00
Gregory Nutt
bd5d079c02 arch/mips/src/pic32m[x|z]/pic32m[x|z]-ethernet.c: Fix a comparison in a debug assertion. Should be <= vs <. Noted by Anonymous in Bitbucket Isue 134. 2018-11-21 12:35:43 -06:00
Gregory Nutt
09f4dee6bc All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences. 2018-11-21 07:57:26 -06:00
Gregory Nutt
7a45fc6f1c arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support. 2018-11-20 08:09:03 -06:00
Xiang Xiao
dbf01d12b7 Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch. 2018-11-15 07:11:51 -06:00
Xiang Xiao
543f4ed8ec arch/ all assertion functions: up_assert move the register dump to first make the more important info first 2018-11-11 12:53:59 -06:00
Xiang Xiao
dfe788be25 arch/ all assertion functinos: up_stackdump dump the full stack if stack overflow the stack info is very useful to find the backtrace 2018-11-11 12:52:36 -06:00
Gregory Nutt
2b3ec4172d arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. 2018-11-10 14:06:46 -06:00
Gregory Nutt
9c3e65f15f net/mld: Fix a few compilation problems that cropped up in a different network configuration. Fix a logic error in setting the 'Other Querier Present' timer. Various cosmetic improvements. 2018-11-07 18:21:21 -06:00
Gregory Nutt
68e45d0453 Reported by Anonymous in Bitbucket Issue #129:
When MIPS port is built for microMIPS and then loaded as an application, the __start entry point is entered in microMIPS mode, but the CPU core initialization code there misses to set the config3ISAOnExc bit to 1. Subsequently, exceptions are entered in MIPS32 mode, but the code base was built for microMIPS.
2018-11-07 10:48:33 -06:00
Gregory Nutt
6d93658ff8 Add new configuratin CONFIG_NET_MCASTGROUP. This option is selected automatically if either CONFIG_NET_IGMP or CONFIG_NET_MLD are selected. Most conditional logic based on CONFIG_NET_IGMP replaced with conditioning on CONFIG_NET_MCASTGROUP. 2018-10-31 15:03:51 -06:00
Ouss4
d3d67508a3 arch/mips/src/mips32/Toolchain.defs: Add toolchain flags for the pinguino toolchain under Linux. 2018-10-16 12:25:37 -06:00
Ouss4
3a594d5a1f arch/mips/src/pic32mz/pic32mz-head.S: Initialize the global pointer in all shadow sets. 2018-10-16 12:25:37 -06:00
Ouss4
f7e4f614ef arch/mips/src/pic32mz/pic32mz-serial.c: Fix a typo in assignment of TTYS0 to UART6 2018-10-16 12:25:37 -06:00
Gregory Nutt
4d75901cc4 arch/mips/include/mips32/cp0.h: Fix some copy-paste errors that cause malformed comments and syntax errors when certain CP0 CONFIG1 bits are referenced. Note in Issue 123 by Anonymous. 2018-10-12 14:52:05 -06:00
Gregory Nutt
9546481054 Fix some typographical errors. 2018-09-14 06:55:45 -06:00
Gregory Nutt
9bc951a335 Rename devif_loopback_out to devi_loopback 2018-08-25 08:33:21 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
0074afa0ac net/netdev: add devif_loopback_out() to check the loopback case where a packet is being sent to itself. Modify the net driver to call this function in this case. This function will simply re-inject the packet back into the network and the network driver will not put anything on the wire. 2018-08-24 09:21:33 -06:00
Xiang Xiao
36b46a6a40 arch/ and task/sched: vfork operation needs to allocate and copy the task argument too. Also correction of the address correction cannot depend on the stack pointer since it is not available in all architectures. Rather callculate the offset from the stack allocation pointer 2018-08-24 07:43:00 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong. 2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
c2267a57a0 Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115. 2018-08-05 10:48:02 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Gregory Nutt
22cd0d47fa This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE.
This makes the user interface a little hostile.  People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header).  A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length.  Instead, we define the packet buffer size then derive the MTU.

The MTU is not common currency in networking.  On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP).  Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes.  So we should be all good and without the recurring 14 byte error in MTU's and MSS's.

Squashed commit of the following:

    Trivial update to fix some spacing issues.
    net/: Rename several macros containing _MTU to _PKTSIZE.
    net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE.  This is not the MTU which does not include the size of the link layer header.  This is the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename the file d_mtu in the network driver structure to d_pktsize.  That value saved there is not the MTU.  The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header.  The MTU does not include the link layer header.
2018-07-04 14:10:40 -06:00
Gregory Nutt
d52b65b06d Fix several configuration varaibles that were defined in multiple Kconfig files and/or lacked any scoping and the naming.
Squashed commit of the following:

    lpc17, pic32mx, pic32mz:  Fix duplicated, improperly scoped configuration variable names:  CONFIG_PHY_SPEED100 and CONFIG_PHY_AUTONEG.
    lpc17, pic32mx, pic32mz:  Fix another duplicated configuration variable name:  CONFIG_PHY_FDUPLEX.
    lpc17:  Fix naming scope: CONFIG_NET_HASH -> CONFIG_LPC17_ETH_HASH.
    lpc17:  Fix naming scope: CONFIG_NET_WOL -> CONFIG_LPC17_ETH_WOL.
    lpc17, pic32mx, pic32mz:  Fix naming scope: CONFIG_NET_ -> CONFIG_LPC17_ETH_PRIORITY.
    lpc17, pic32mx, pic32mz:  Fix another duplicated configuration variable name:  CONFIG_NET_NTXDESC and CONFIG_NET_NRXDESC.
    lpc17:  Fix naming scope: CONFIG_NET_EMACRAM_SIZE -> CONFIG_LPC17_EMACRAM_SIZE.
2018-06-30 11:55:41 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte:
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
2018-06-06 09:54:30 -06:00
Gregory Nutt
9222f50e1c arch/: Make sure the up_irq_enable() is available on all architectures. I will not be able to test all of these new versions of this function so this may break things for awhile. 2018-06-06 09:25:40 -06:00
Gregory Nutt
d52c63f632 Change all references from OSX to macOS 2018-06-01 13:25:50 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
6435a2b25b arch/mips/src: All MIPS architctures now support CONFIG_ARCH_IDLE_CUSTOM 2018-05-07 11:17:19 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
a524b33f2c Update some comments 2018-02-11 10:30:45 -06:00
Gregory Nutt
642d7e3ce2 Squashed commit of the following:
configs/flipnclick-pic32mz:  Add an nxlines configuration for use in testing the custom HiletGo Click board.
    arch/mips/src/pic32mz:  Correct some SPI-related typos.  configs/flipnclick-pic32mz: Finishes integration of HiletGo OLED. drivers/lcd:  Finish support for HiletGo OLED.
    drivers/lcd:  Add configuration support for HiletGo OLED.  configs/flipnclick-pic32mz:  Add board support for HiletGo OLED.
2018-02-10 09:43:12 -06:00
Gregory Nutt
73ec87109f arch/mips/src/mips32: In up_idle, the kludge that was conditionally enabled if the work queue was enable appears to be needed even when he work queue is not enabled on the PIC32MZ.
arch/mips/src/pic32mz: Fix some typos in debug instrumentation in pic32mz-gpio.c; fix some types releated to UART5 configuration in pic32mz-serial.c.

configs/flipnclick-pic32mz/nsh:  Switch serial console to UART3.  There is some problem with the UART4 RX pin documentation or configuration.
2018-02-09 11:11:44 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
da50646bcf sched/wdog: wd_start() is an internal OS function and should not set the errno value. Reviewed and updated every call to wd_start() to verify if return value is used and if so if the errno value is accessed. 2018-01-31 10:09:14 -06:00
Gregory Nutt
a8b6be4aaf The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method. 2018-01-22 08:17:45 -06:00
Gregory Nutt
7d4451ee86 Squashed commit of the following:
configs/flipnclick-pic32mz:  Switch the serial console to UART4.  Clean up some minor issues the LED options.
    configs/flipnclick-pic32mz:  Add support for two on-board buttons:  T1 and T2.
    configs/flipnclick-pic32mz:  Adds basic board support for the Mikroe Flip&Click PIC32MZ board.  Initial commit is just the configs/pic32mz-starterkit with some name chanages.
2018-01-08 14:21:49 -06:00
Gregory Nutt
6fe1f5a96c Squashed commit of the following:
arch/mips/src/pic32mz:  Commits the basic architecture port for the PIC32MZEF.
    arch/mips/src/pic32mz:  Begin adding PIC32MZEF files. Initial commit are simply PIC32MZEC files with name changes.
    arch/mips/include/pic32mz:  Add support for the PIC32MZEF family.
2018-01-08 10:01:23 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following:
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following:
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following:
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
2017-10-03 12:52:31 -06:00
Gregory Nutt
1c5ec07414 arch/: Remove dangling space at the end of lines. 2017-06-28 13:16:48 -06:00
Gregory Nutt
7fe112fe4c Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition. 2017-05-13 11:44:12 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
b6b16bf4da Fix forward references that were mangled in last large changes. 2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
32383556fd PIC32MZ: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:23:45 -06:00
Gregory Nutt
1564b384e1 PIC32MX: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:10:05 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0 Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX. 2017-02-24 15:58:17 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts. 2017-01-13 11:08:24 -06:00
Gregory Nutt
13d00344c9 Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10 2017-01-02 07:16:47 -06:00
Gregory Nutt
3a0413c048 Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10. 2017-01-01 16:29:03 -06:00
Gregory Nutt
34be3e7c3c Add configuration support for builds with Ubuntu under Windows 10 2017-01-01 15:34:23 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
41e35c88bf eZ80 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 10:43:35 -06:00
Gregory Nutt
eba1e076ec PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT 2016-12-03 09:50:14 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Gregory Nutt
b0dffdc2ca Fix a number of header files with mismatched 'extern C {' and '}' 2016-11-05 07:25:05 -06:00
Paul A. Patience
912fe06a86 Add architecture-specific inttypes.h 2016-10-27 16:01:38 -04:00
Gregory Nutt
d41008e220 Update some header commments 2016-08-06 18:16:31 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
e7f0a56498 Correct some comments 2016-07-15 13:13:53 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57 Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model. 2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27 Eliminate a warning 2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
0f18f3bd15 Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally 2016-06-19 09:39:21 -06:00
Gregory Nutt
ac18dc27ca Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported 2016-06-17 15:22:48 -06:00
Gregory Nutt
b39e53391d Add underscore at beginning of alert() as well 2016-06-16 12:38:05 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
6f08216621 Centralize definitions associated with CONFIG_DEBUG_SYSCALL 2016-06-16 08:12:38 -06:00
Gregory Nutt
ba03134bed Centralize definitions associated with CONFIG_DEBUG_SPI 2016-06-15 10:41:13 -06:00
Gregory Nutt
a97d3ae707 Centralize definitions associated with CONFIG_DEBUG_GPIO 2016-06-15 09:20:23 -06:00
Gregory Nutt
64fa0ab51f Fix Kconfig dependency 2016-06-14 12:36:59 -06:00
Gregory Nutt
080aa07110 arch/mips/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 12:34:29 -06:00
Gregory Nutt
a98bc05f65 New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting. 2016-06-14 09:07:53 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
d5275e48d0 Eliminate some warnings 2016-06-13 13:16:03 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
5ef3e3e215 Replace confusing references to uIP with just 'the network' 2016-05-30 11:52:07 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
fb484a581f All GCC final arch/*/src/Makefiles: Allow --start-group and --end-group to be redefined for the case where GCC is used to link (instead of LD). Suggested by Paul Alexander Patience. 2016-05-17 10:43:15 -06:00
Gregory Nutt
99e695398c Rename up_boot to arm_boot 2016-05-12 13:42:49 -06:00
Gregory Nutt
f7d3b8147f Rename CONFIG_NET_MULTICAST to avoid name conflicts 2016-03-20 13:14:36 -06:00
Gregory Nutt
bd846c2e72 All architectures: Register the schedule note driver if enabled 2016-03-17 17:00:59 -06:00
Gregory Nutt
4d4f54a789 Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs 2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98 Standard some naming if code sectino comments 2016-02-21 18:06:09 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 19:11:09 -06:00
Gregory Nutt
b373894fbc MIPS: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 16:49:34 -06:00
Gregory Nutt
1166e311b0 Networking: Remove the HSEC argument from devif_timer. 2016-02-03 11:17:15 -06:00
Gregory Nutt
3b6a502eff For LK MCUs, rename up_spiinitialize to kl_spibus_initialize 2016-01-26 16:19:03 -06:00
Gregory Nutt
ba17c8ea18 For PIC32MX/Z MCUs, rename up_spiinitialize to pic32mx/z_spibus_initialize 2016-01-26 15:47:42 -06:00
Gregory Nutt
b7cbbab761 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:10:21 -06:00
Gregory Nutt
4bd6adb725 Add dummy hwfeatures method to all SPI interfaces 2016-01-23 15:09:38 -06:00
Gregory Nutt
10001f8556 WINTOOl should be selected only for Cygwin. MSYS and native should not have it. 2016-01-09 16:34:33 -06:00
Gregory Nutt
fe94318bb4 PIC32MX/MZ: Fix error in assember macro. Noted by Tilak Tangudu 2016-01-05 10:04:50 -06:00
Gregory Nutt
71c289ce4f Rename all architecture files of form xyz_internal.h to just xyz.h 2015-12-29 18:07:11 -06:00
Gregory Nutt
927b1dcc1f Initialize the telnet factory as part of the common architecture intialization 2015-12-07 11:40:29 -06:00
Gregory Nutt
e5e631e57f include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:07:18 -06:00
Gregory Nutt
2afd4595e4 Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES 2015-11-26 06:59:35 -06:00
Gregory Nutt
4aa3dcb51a __KERNEL__ should be defined when compiler architecture specific logic 2015-11-25 18:05:36 -06:00
Gregory Nutt
14d7ede265 All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y 2015-11-25 17:10:41 -06:00
Gregory Nutt
79df561669 Rename board_led_off to board_autoled_off 2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3 Rename board_led_on to board_autoled_on 2015-11-01 09:07:06 -06:00
Gregory Nutt
4a46a872bd arch/mips: fix some spacing and alignment issues 2015-10-12 08:18:03 -06:00
Gregory Nutt
7a63e976ad Remove TABs 2015-10-04 16:00:42 -06:00
Gregory Nutt
6fc6d17760 Fix some spacing problems 2015-10-04 14:59:08 -06:00
Gregory Nutt
9caf33e13b Standardize the width of all comment boxes in C header files 2015-10-03 07:28:30 -06:00
Gregory Nutt
7ced84c5f0 Standardize the width of all comment boxes in C files 2015-10-03 07:25:03 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
26347891ac Apply same fix for ARMv7-M to other architectures 2015-09-30 11:21:04 -06:00
Gregory Nutt
26eada3446 In all up_initialize() functions, automatically initialize TUN driver is so configureded 2015-09-06 09:35:29 -06:00